Mulakan

Support

AG Pro Equal High / Equal Low Sweep Engine [AGPro Series]AG Pro Equal High / Equal Low Sweep Engine Overview / What it does AG Pro Equal High / Equal Low Sweep Engine is a price-action overlay designed to detect equal highs (EQH) and equal lows (EQL), track the liquidity pools that form around those levels, and highlight sweep events when price briefly trades through them and then closes back with confirmation. The script focuses on one specific market behavior: clustered highs and lows that tend to attract liquidity, followed by rejection-style sweeps that can mark failed continuation attempts, trap conditions, or local reaction points. Instead of treating every wick through a prior level as equally important, the script separates untouched pools from already swept pools, applies a configurable tolerance model for defining EQH/EQL structures, and adds close-based confirmation logic so users can filter out weaker events. Short liquidity lines, band-style zones, trap labels, and a compact summary panel are used to keep the information visible without turning the chart into a large box-based map. This tool is built for traders who want a structured view of repeated highs/lows and the liquidity behavior around them. It is not intended to label every possible swing event on the chart. Its purpose is narrower and more deliberate: identify equal-high / equal-low liquidity pools, monitor whether they remain intact or get swept, and display the sweep in a visually organized way. Unique Edge The main distinction of this script is that it does not attempt to map all forms of stop runs or all types of liquidity events. It concentrates specifically on EQH/EQL liquidity pools and the sweep lifecycle around those pools. That narrower scope allows the chart objects to remain more readable while still showing useful structure. The script also distinguishes between untouched and swept states. This matters because a fresh liquidity pool and a previously swept pool do not represent the same chart condition. Untouched pools can still act as active draw-on-liquidity zones, while swept pools become part of recent context and may be interpreted differently depending on the user's framework. A second differentiator is the combination of equal-pool detection, close confirmation, and optional quality scoring. Equal highs and equal lows are first identified using pivot logic and a user-defined tolerance percentage. Then, when price trades through the pool, the script can require either any wick, a reclaim close, or a stronger rejection close before confirming the sweep. An optional quality bonus can further weight events when relative volume and rejection characteristics are more supportive. The visual model is also intentionally selective. Instead of using large generalized rectangles across the whole chart, the script uses shorter liquidity lines and band zones tied directly to the detected pool. This keeps the visuals anchored to the detected structure rather than creating broad areas that may overstate precision. Methodology 1) Equal High / Equal Low Detection The script uses pivot highs and pivot lows to build candidate swing points. When two highs or two lows form within the user-defined tolerance threshold and within the required bar spacing, they are treated as an equal-high or equal-low liquidity pool. Multiple nearby pools can optionally be merged into a cleaner combined structure. 2) Liquidity Pool Lifecycle Once a pool is created, it is tracked as active until one of two things happens: it is swept by price, or it expires after its configured lifetime. The script maintains state so pools can be shown as untouched, swept, or removed when they are no longer relevant. 3) Sweep Confirmation A sweep is not limited to price piercing the level. The script can require: - Any Wick: any trade-through qualifies. - Reclaim Close: price must close back through the level after the sweep. - Strong Rejection: a stricter close-position filter is applied. This helps users decide how sensitive or selective they want the engine to be. 4) Quality Logic When enabled, the script calculates a quality score using rejection characteristics, close position, relative volume behavior, pool freshness, and pivot clustering. This is not a predictive score or a probability model. It is a contextual ranking layer intended to help compare sweeps on the same chart. 5) Visual Presentation The script can draw: - short horizontal liquidity lines - band-style EQH/EQL zones - optional reaction boxes after selected sweeps - trap labels on confirmed events - a summary panel showing current pool and sweep status Signals & Alerts The script includes alert conditions for: - new EQH pool detected - new EQL pool detected - EQH sweep confirmed - EQL sweep confirmed - any sweep confirmed These alerts are event-based and depend on the current settings used for confirmation and filtering. If stricter filters are selected, the number of confirmed events will naturally decrease. Key Inputs Pivot Strength Controls how swing highs and lows are confirmed. Higher values usually produce fewer, more structurally significant pools. EQH / EQL Tolerance % Defines how close two highs or lows must be to qualify as equal. Lower values make the script stricter. Higher values allow broader matching. Min / Max Bars Between Pivots Controls the acceptable spacing between the two pivots that define a pool. Sweep Close Filter Lets the user choose between wick-only behavior and more selective reclaim/rejection confirmation. Quality Bonus Adds an optional scoring bonus when the sweep also shows stronger contextual characteristics. Liquidity Line / Zone Length Controls how far the liquidity structures extend on the chart. Panel and Visual Settings Allow the user to tune panel position, label size, color theme, and display density for different chart styles and timeframes. Limitations & Transparency This script identifies equal highs and equal lows using pivot-based rules and a configurable tolerance model. Because of that, results depend on the chosen settings, the symbol, the timeframe, and the chart's volatility profile. A confirmed sweep should not be interpreted as a guaranteed reversal or a complete trade setup by itself. In some market conditions, price can sweep a pool and continue in the same direction. In other conditions, a sweep may mark only a short-lived reaction. The script highlights structural events; it does not forecast outcome. The quality score is a contextual ranking aid, not a performance promise, win-rate estimate, or statistical edge claim. Different users may prefer different thresholds depending on market regime and execution model. Band zones and reaction areas are visual approximations derived from the detected pool and post-sweep behavior. They are designed to improve chart readability, not to define exact institutional order blocks or guaranteed execution zones. Risk Disclosure This script is an analytical charting tool for studying equal-high / equal-low liquidity behavior and sweep confirmation. It does not provide financial advice, investment advice, or trade recommendations. All trading decisions remain the user's responsibility. Like any technical tool, it should be used with broader market context, risk management, and independent judgment. No indicator can eliminate uncertainty, and past chart behavior does not guarantee future results.
Penunjuk Pine Script®
oleh AGProLabs
2
AG Pro Liquidity Heatmap [AGPro Series]AG Pro Liquidity Heatmap Overview / What it does AG Pro Liquidity Heatmap is a visual liquidity-mapping tool designed to project areas where resting stop interest is more likely to be concentrated. Instead of focusing on a single pattern or a one-bar signal, this script builds a forward-looking heatmap from clustered pivot behavior and displays that information as persistent horizontal liquidity bands on the chart. The core idea is simple: repeated reactions around similar price levels often create zones where traders place stops, breakout orders, or defensive exits. When those levels begin to cluster, they can become structurally important. This script converts that clustering behavior into a heat score and renders it as layered Fire / Ice bands so traders can quickly identify where liquidity concentration may be building above or below current price. The script is not built as a prediction engine, and it does not attempt to claim where price must go next. Its purpose is to help traders organize the chart, monitor the nearest active liquidity bands, and understand which nearby levels appear more saturated, more persistent, or already mitigated. In that sense, it is best used as a market-structure context tool rather than as a standalone entry model. This script is also intentionally different from traditional support/resistance overlays, breakout detectors, and liquidity sweep labels. It does not merely mark recent highs and lows. It clusters pivot-derived levels, weights them into a dynamic heat score, extends them cleanly to the right side of the chart, and then updates or extinguishes them as price interacts with those zones. Unique Edge The unique edge of this script is that it treats liquidity as a developing field rather than a static line. A normal horizontal level script may show one prior high or one prior low. AG Pro Liquidity Heatmap instead tracks repeated pivot concentration, merges nearby levels into composite zones, scores those zones, and then visualizes the result as a layered heat structure. A second differentiator is the lifecycle logic. Once a band has been interacted with, the script does not leave every level unchanged forever. Depending on the selected behavior, a zone can fade or be removed after liquidity is taken. This helps reduce visual clutter and keeps the chart focused on currently relevant liquidity structures rather than a permanently accumulating archive of old levels. A third differentiator is presentation. The script is designed to produce a clean forward projection area with right-extending heat bands, readable labels, Fire / Ice theme control, a functional heatmap panel, and an optional EQ Magnet line that tracks the balance area between the nearest active upper and lower liquidity bands. The goal is not only analytical clarity, but also a chart layout that remains readable during live use. Methodology 1) Pivot detection The script first identifies pivot highs and pivot lows using user-defined left and right pivot lengths. These pivots are treated as candidate liquidity reference points. 2) Cluster merging If a new pivot forms close enough to an existing level, based on an ATR-driven merge distance, the script merges that information into the existing zone rather than creating unnecessary duplication. This allows nearby pivots to accumulate into a stronger composite band. 3) Heat scoring Each zone receives a heat score. Repeated clustering increases that score. When volume weighting is enabled, pivots formed with relatively stronger volume can contribute more heavily to the final score. This does not reveal actual order book liquidity, but it can provide a useful proxy for where market attention and stop concentration may be stronger. 4) Layered rendering Each active zone is rendered as a multi-layer horizontal band. The band thickness and saturation scale with heat score, which makes stronger zones visually heavier than weaker ones. This helps the chart communicate intensity without requiring the user to read every value manually. 5) Liquidity lifecycle When price reaches a zone, the script can either fade it or remove it depending on the selected extinguish mode. Optional mitigation tracking can leave a visual reminder of where liquidity was taken. This behavior is important because it keeps the heatmap adaptive rather than static. 6) Balance tracking When both upper and lower active liquidity bands are available, the script can display an EQ Magnet line between the nearest bands. This is not a target call. It is a contextual balance reference that can help visualize the midpoint of the currently nearest active liquidity field. States & Visual Elements - Fire bands represent upper liquidity concentration derived from pivot highs. - Ice bands represent lower liquidity concentration derived from pivot lows. - Stronger zones become visually denser and more prominent as heat score rises. - Zone labels display side, heat score, and price information in either compact or detailed mode. - The Heatmap Panel summarizes active band count, nearest zones, strongest zones, heat balance, last sweep information, and the current extinguish behavior. - The EQ Magnet line highlights the midpoint between the nearest active upper and lower bands when enabled. - Optional mitigation tracks can remain on the chart after liquidity is taken. How to use it This script is generally most useful as a context layer. Many traders may choose to use it in one of three ways: - to map where price may interact with nearby liquidity concentration, - to judge whether the closest active field is above or below current price, - to avoid taking impulsive decisions directly into dense opposing liquidity. The script can also be useful for chart organization. Traders who already use trend tools, structure tools, or trigger models may use the heatmap as a location filter. For example, a setup forming directly into a strong opposing liquidity band may deserve more caution than a setup developing in cleaner space. Key Inputs Pivot Left / Right Bars Controls how pivots are detected. Smaller values can produce more frequent zones; larger values can make the structure more selective. Cluster Merge Distance (ATR) Defines how close pivots must be to merge into the same liquidity band. Lower values keep zones more separated; higher values create broader clustering. Volume-Weighted Mode Allows higher-volume pivots to contribute more strongly to heat score. This is a proxy weighting mechanism, not direct order-flow confirmation. Minimum Heat Score To Show Filters out weaker zones from the visual display. Visual Saturation Score Controls how quickly the visual intensity reaches its maximum appearance. Base Band Height and Horizontal Band Density Shape the visual footprint of each zone and determine how rich or minimal the rendered band structure appears. Label controls Allow the user to choose label mode, font size, theme, label offsets, and label density. Panel controls Allow the user to change panel visibility, location, theme, and font size. Liquidity Taken Behavior Determines whether mitigated zones fade or are removed. Limitations & Transparency This script does not access order book data, exchange liquidation feeds, or hidden liquidity information. The displayed heatmap is derived from chart-based pivot clustering and optional volume weighting. For that reason, the bands should be understood as technical liquidity proxies rather than direct measurements of real resting orders. The heat score is also relative to the script's own internal logic. It is a ranking mechanism inside this model, not an absolute market-wide score. A higher score means a zone has accumulated more structural weight within the selected settings; it does not guarantee a reaction. Like any chart tool based on pivots, the behavior of the script depends on the chosen timeframe, the selected sensitivity inputs, and the structure of the instrument being analyzed. Lower timeframes can create more noise, while higher timeframes can produce fewer but broader zones. The EQ Magnet line is a contextual midpoint reference only. It should not be interpreted as a fixed target, a required destination, or a directional forecast. Risk Disclosure This script is a visual analysis tool for chart study and trade planning. It is not financial advice, not an execution system, and not a promise of future price behavior. Liquidity zones can fail, be overrun, or be ignored by price entirely. No indicator should be used in isolation. Traders should consider market structure, volatility, risk management, execution quality, and their own process before making trading decisions. Always test settings carefully and use position sizing appropriate to your own risk tolerance.
Penunjuk Pine Script®
oleh AGProLabs
4
AG Pro PDH PDL PWH PWL Engine [AGPro Series]AG Pro PDH PDL PWH PWL Engine Overview / What it does AG Pro PDH PDL PWH PWL Engine is a price-reference overlay built to track prior day, prior week, and prior month high / low levels in a clean and structured way. The script can display PDH, PDL, PWH, PWL, and optionally PMH / PML, together with midpoint equilibrium levels for the selected ranges. The main purpose of the script is not to predict direction, generate guaranteed entries, or replace a complete trading plan. Its role is narrower and more practical: it helps traders keep important prior-period reference levels visible on the chart, distinguish which levels remain active, and identify which ones have already been traded through. In many markets, prior highs and lows are widely monitored as liquidity, reaction, and reference areas. This script organizes those areas into a format that is easier to read in live conditions. A core design goal of this tool is chart hygiene. Many prior-level indicators become visually noisy when several daily, weekly, and monthly references are drawn together. This script was designed to keep the structure readable by using a minimal label system, right-extended lines, a swept / unswept state model, and an optional dashboard that summarizes the nearest active daily, weekly, and monthly levels. The result is a workflow-oriented overlay that helps with context. Instead of forcing interpretation through aggressive signals, it presents a structured map of where important prior-period levels are located, whether they are still untouched, and whether current price is approaching one of them. That makes it suitable for traders who want an objective level engine rather than a directional prediction tool. Unique Edge The script focuses on presentation quality and state clarity rather than simple level plotting. Prior highs and lows are not rare concepts, but the practical usefulness of such levels depends heavily on how they are filtered, displayed, and maintained on the chart. This script aims to improve that usability in several ways. First, it separates active levels from swept levels. This matters because a previously untouched level and a level that has already been traded through do not carry the same contextual value for many traders. By visually differentiating unswept and swept references, the overlay can help reduce ambiguity when reviewing current structure. Second, it combines multi-period references in one coherent engine. Daily, weekly, and optional monthly levels can all be displayed together, while preserving a relatively clean visual hierarchy. This is particularly useful for traders who want to see whether current price is interacting with short-term references inside larger higher-timeframe ranges. Third, it includes proximity logic. The script can highlight levels when price is near them using a threshold defined in ticks, percentage, or ATR terms. This does not imply a trade signal by itself. Instead, it acts as a situational awareness feature that helps traders notice when price is entering a predefined level zone. Fourth, the script offers session and timezone controls. That allows the user to adapt the level-building logic to the exchange clock or to a chosen session definition. For traders who care about session-based construction and consistency across instruments, this can be an important operational detail. Finally, the panel is designed as a compact summary rather than a decorative feature. It reports the nearest active daily, weekly, and monthly references, shows counts for active and swept levels, and keeps session / timezone / label mode settings visible. The goal is to reduce chart scanning time and make the script easier to use during live analysis. Methodology The engine tracks highs and lows from completed prior periods and then projects those values forward as reference lines. Depending on the enabled settings, it can build: - Previous Day High and Previous Day Low - Previous Week High and Previous Week Low - Previous Month High and Previous Month Low - Optional equilibrium midpoints for each enabled range Each level is created only after the relevant source period is completed. In that sense, the level itself is based on completed historical range data. Once created, the line is monitored for its state. If price trades through a high reference or a low reference, the script marks that level as swept and changes its visual treatment accordingly. The script also maintains historical periods up to the number defined in the settings. This makes it possible to preserve a limited amount of recent structure without keeping an unlimited number of stale objects on the chart. The equilibrium option adds the midpoint of the corresponding prior range. Some traders use these 50% areas as balance references or as secondary context between the prior high and low. Because that midpoint is optional, the user can keep it visible when needed or disable it for a cleaner chart. The proximity engine measures how close current price is to an active level using one of three methods: - Tick distance - Percentage distance - ATR-based distance This feature is meant to flag nearness, not to define trade quality on its own. A prior level being near price does not automatically make the setup actionable. It only states that price is close to a tracked reference according to the selected threshold logic. States / Signals / Alerts This script is primarily a level-state and context tool. It is not a directional forecasting model. Its most important outputs are state-based: 1) Active level A level is considered active when it has been created from a completed prior period and has not yet been traded through by price. 2) Swept level A level is considered swept when price trades through that reference. Visually separating swept levels from active ones helps the chart communicate which prior references remain untouched. 3) Near-level condition When enabled, the script can highlight active levels that are close to current price according to the user-defined threshold method. This can help traders focus attention on nearby reference zones without scanning the entire chart manually. 4) Compact dashboard state The panel summarizes the nearest active daily, weekly, and monthly levels, along with active count, swept count, near count, selected timezone, session configuration, and label mode. The included alert conditions are intentionally simple and state-based: - Price is near one of the active levels - At least one tracked level was swept on the current bar These alerts are meant to support monitoring. They are not, by themselves, a complete trading trigger. Users should interpret them together with structure, volatility, session context, confirmation rules, and their own risk process. Why this script can be useful This script can be useful because prior highs and lows often matter most when they are easy to monitor and hard to misread. In practice, traders do not only need the raw numbers; they need a chart presentation that allows those numbers to remain readable during fast market conditions. A clean prior-level map can help in several common situations: - Evaluating whether price is approaching an untouched daily or weekly reference - Checking whether a local move is happening inside a larger higher-timeframe level framework - Distinguishing still-relevant references from already-tested ones - Monitoring potential reaction zones without crowding the chart with excessive objects - Organizing reference structure across intraday and swing workflows The script is also designed to remain practical over time. Instead of drawing everything with equal visual importance, it uses state logic and summary logic to keep the display more structured. That can make the tool easier to integrate into a routine where prior-period references are part of the trader's contextual process. Another useful aspect is that the script stays objective. It does not attempt to label every market move with a strong opinion. It shows completed prior-period levels, their current state, and whether price is approaching them. Many traders prefer this kind of neutral reference framework because it can be combined with other methodologies without forcing one interpretation. Key Inputs Timezone The script can use the exchange timezone or a selected timezone. This affects how period transitions are interpreted. Use Custom Session Filter When enabled, highs and lows are built only from bars inside the selected session. This allows the user to adapt the range construction to a chosen session framework. Session Defines the custom session window when session filtering is enabled. Show Previous Day / Week / Month Levels Each group can be enabled or disabled independently so the user can decide how much structure to display. Show Equilibrium Midpoints Adds the 50% midpoint of each enabled prior range. Historical Periods to Keep Controls how many past periods remain visible on the chart for each enabled level family. Proximity Threshold Type Lets the user define nearness by ticks, percentage, or ATR. Threshold Value / ATR Length Controls the sensitivity of the proximity logic. Highlight Levels When Near Allows visual emphasis when price approaches an active level. Line Style and Extension Settings Controls the appearance of unswept and swept lines and whether active lines extend to the right. Minimal Label Mode Allows labels to be turned off, restricted, or shown for active levels, depending on the user's preferred chart cleanliness. Panel Controls The dashboard can be enabled or disabled and its size, position, and colors can be adjusted. Example use cases This script can be used in different ways depending on the trader's workflow. Intraday context mapping: A trader may monitor PDH and PDL together with PWH and PWL to understand whether intraday price is moving into untouched daily liquidity while still operating inside a broader weekly range. Reaction-zone awareness: A trader may use near-level highlighting to notice when price is approaching an unswept prior high or prior low and then look for separate confirmation with their own method. Structure filtering: A trader may ignore swept references and focus mainly on active levels that remain intact, especially when trying to simplify the chart during live sessions. Session-based reference building: A trader who prefers a specific session logic can use the session filter so the constructed ranges better match their market framework. Dashboard monitoring: A trader may use the panel as a quick situational summary to identify which daily, weekly, or monthly reference is closest without manually reading every line. Limitations & Transparency This script does not know why price interacts with a level. It only identifies prior-period references and tracks whether they are active, near, or swept according to the rules defined in the code. A prior level is not automatically support or resistance in every market condition. Some reactions are meaningful, some are shallow, and some levels are passed through with little response. For that reason, the script should be treated as a structured reference map rather than a self-sufficient trade decision engine. The near-level logic depends on user-defined thresholds. Different threshold types and values can materially change how often levels are classified as near. Traders should calibrate these settings according to instrument volatility and their own workflow. Session and timezone choices also matter. The same market can produce different prior-period values depending on how the session is defined. Users should select settings that match the way they analyze the instrument. Historical object limits, chart timeframe, and chart compression can influence how dense the display appears. A setting that looks clean on one instrument or timeframe may feel crowded on another. The script provides controls to manage that, but users should still adapt it to their own use case. The midpoint equilibrium lines are optional because not every trader uses 50% references the same way. Their inclusion does not imply that the midpoint has universal predictive value. It is simply provided as an additional structural reference. This script is intentionally conservative in what it claims. It does not claim to detect institutional intent, hidden order flow, or guaranteed reversals. It displays prior completed reference levels and their current state on the chart. Risk Disclosure This script is for chart analysis and educational use. It does not provide financial advice, investment advice, or trade recommendations. Prior-period highs, lows, and midpoint references can be useful market context, but they are not guarantees of reaction, reversal, continuation, or liquidity behavior. Market conditions can change quickly, and price can move through any level without producing a tradable setup. Users should combine this tool with their own confirmation process, execution rules, position sizing framework, and risk management. No indicator should be used as the sole basis for entering or exiting a trade. Before using any chart tool in live markets, it is important to understand how its settings affect output, how it behaves on the instrument being traded, and how it fits into a broader decision process. AG Pro PDH PDL PWH PWL Engine is designed to help organize prior-period level information in a cleaner and more operational format. Its value comes from clarity, state tracking, and context support, not from predictive certainty.
Penunjuk Pine Script®
oleh AGProLabs
2
AG Pro Auto Supply & Demand Zones [AGPro Series]AG Pro Auto Supply & Demand Zones Overview / What it does AG Pro Auto Supply & Demand Zones is an overlay that automatically detects supply and demand areas by combining compact base structures with directional displacement. The script is designed to help traders track where price left an area with enough urgency to justify keeping that zone on the chart for future reference, while also showing how that zone evolves over time. Instead of plotting every possible reaction area, the script applies a structured lifecycle model. A newly created zone begins as Fresh, can transition to Tested after a qualifying retest, and can later become Expired when it no longer meets the active criteria selected by the user. This state-based approach makes the chart easier to interpret because zones are not treated as static drawings. They are continuously re-evaluated as price interacts with them. The script also distinguishes between proximal and distal boundaries so users can see both the near edge and the full depth of each zone. A built-in active-zone limit helps keep the chart under control, and older zones gradually fade through time-based opacity reduction. This allows recent and decision-relevant areas to remain visually stronger while historical context becomes lighter. A light higher-timeframe overlay is included for users who want broader context without turning the chart into a dense multi-timeframe map. The goal is not to overwhelm the screen with background structure, but to add a subtle layer of alignment when higher-timeframe supply or demand remains relevant to the current price area. Unique Edge The distinctive feature of this script is that it does not stop at zone creation. It manages the full visual and logical lifecycle of a zone. Fresh, Tested, and Expired states are tracked in an explicit way, which makes the output more practical than a simple box-drawing tool. A second differentiator is the same-side merge logic. When a newly detected zone forms too close to an existing zone on the same side, the script can refresh or merge that area instead of stacking nearly identical layers on top of one another. This helps reduce redundancy and produces a cleaner, more readable structure map. Another important edge is the visibility architecture. Users can choose between All, Balanced Focus, and Smart Focus modes. This allows the chart to stay informative without becoming overloaded. Nearest active zones can be emphasized, distant context can be softened, and labels can be kept minimal, balanced, or fully expanded depending on the preferred workflow. Methodology The script uses a base-plus-displacement framework. 1. Base detection A candidate zone begins with a compact base cluster. The script evaluates the total base range relative to ATR and can also apply a clean-wick filter so that noisy or overly volatile bases are filtered out. 2. Displacement confirmation After the base, the script looks for directional expansion. The displacement candle must satisfy body-size conditions relative to ATR and must close with sufficient directional conviction. This is intended to avoid weak breaks that do not clearly separate from the base. 3. Zone construction For demand zones, the script builds the area using the base body high as the proximal reference and the base low as the distal boundary. For supply zones, it uses the base body low as the proximal reference and the base high as the distal boundary. This gives the user both the near decision line and the full zone range. 4. Lifecycle tracking A zone is initially Fresh. Once price revisits it under the selected confirmation mode, it can become Tested. If retests exceed the permitted limit, or if the user enables distal close-break invalidation, the zone can transition to Expired. 5. Zone maintenance The script can merge overlapping same-side zones, cap the total number of active zones, reduce opacity as zones age, and selectively hide distant context based on the selected visibility profile. 6. Light higher-timeframe context When enabled, the script projects a restrained higher-timeframe supply and demand layer onto the current chart. This is intended as context, not as a replacement for the active zones detected on the chart timeframe. Signals & Alerts This script includes alert support for key state events: - New Demand Zone - New Supply Zone - Fresh Demand Touched - Fresh Supply Touched - Demand Zone Expired - Supply Zone Expired These alerts are designed to follow the script's zone-state logic rather than subjective interpretation. Users can enable or disable zone-creation alerts, fresh-touch alerts, and expiration alerts independently. Key Inputs Detection Base Bars controls how many candles are used to form the base. Base Range ATR Factor defines how compact the base must remain relative to ATR. Max Single Base Candle ATR Factor limits oversized candles inside the base. Displacement Body ATR Factor controls the minimum strength required for displacement. Displacement Close Location checks whether the displacement candle closes with directional commitment. Use Clean Base Wick Filter helps reduce noisy base formations. Zone Management Merge Nearby Same-Side Zones helps avoid repeated stacking of almost identical zones. Minimum Same-Side Separation ATR defines how close a new zone can be to an existing same-side zone before merge logic becomes relevant. Minimum Zone Overlap Ratio requires stronger overlap before two nearby zones are treated as one structure. Lifecycle Max Active Zones limits how many active zones remain on the chart. Max Tests Before Expire controls how many qualified retests a zone can absorb before it expires. Test Confirmation offers Touch, Penetration, and Close Inside modes. Min Test Penetration Ratio refines how deep price must move into a zone when Penetration mode is selected. Expire On Distal Close Break can invalidate a zone when price closes beyond the distal boundary. Visuals Show Proximal Line and Show Distal Line let users control boundary visibility. Zone Visibility allows All, Balanced Focus, or Smart Focus workflows. Keep Nearest Active Zones Per Side helps preserve immediate context. Highlight Nearest Zones strengthens the most decision-relevant zones. Label Mode, Label Size, Label Right Offset Bars, and Label Spacing ATR control how zone labels are displayed. Light MTF View Enable Light MTF View activates higher-timeframe context. MTF Timeframe selects the higher timeframe. MTF Fill Transparency and MTF Context Bars help keep the overlay subtle. Panel The summary panel can be shown or hidden. Panel Theme, Panel Location, and Panel Font Size allow adaptation to different chart layouts and visual preferences. How to use it Many users will treat this script as a context and reaction map rather than as a standalone entry model. A common workflow is: - identify the nearest active demand and supply zones, - check whether the zone is Fresh or already Tested, - observe whether current price is approaching the proximal boundary or already trading deeper inside the zone, - use the light higher-timeframe layer for context, - then combine the zone information with personal confirmation tools such as structure, momentum, candle behavior, or risk rules. Fresh zones may be more interesting when they align with trend context or with a relevant higher-timeframe area. Tested zones can still matter, but their interpretation should usually be more selective because the zone has already been revisited. Limitations & Transparency This script detects supply and demand zones through a rules-based base and displacement model. It does not claim to identify every meaningful reaction area on a chart, and it does not attempt to label institutional intent, order flow, or smart-money behavior as a certainty. The quality of a zone depends on the selected settings, the volatility profile of the market, and the timeframe being analyzed. A more permissive configuration will naturally surface more zones, while a stricter configuration will produce a cleaner but narrower map. No single setting profile is optimal for every instrument. The higher-timeframe overlay is intentionally lightweight. It is designed to provide context, not to replace full top-down analysis. Likewise, a Fresh or Tested label should not be treated as a guarantee of reaction. It is simply the script's state classification based on the selected confirmation logic. This tool is best understood as a structured charting aid. It helps organize zone detection, lifecycle tracking, and visual prioritization. It does not remove the need for trade selection, confirmation, execution discipline, or risk management. Risk Disclosure This indicator is for chart analysis and educational use only. It does not provide financial advice, investment recommendations, or guaranteed outcomes. Markets can move through supply and demand zones without reacting, can partially react and fail, or can produce false confirmations. Always test settings carefully, evaluate the script in the context of your own process, and use proper risk management before making trading decisions.
Penunjuk Pine Script®
oleh AGProLabs
25
AG Pro Pin Bar Quality Filter [AGPro Series]AG Pro Pin Bar Quality Filter Overview / What it does AG Pro Pin Bar Quality Filter is a price-action overlay built to detect pin bar candles and then separate higher-quality rejection candles from weaker or noisier ones. The script does not treat every long-wick candle as equally meaningful. Instead, it evaluates the internal candle structure first, then applies a compact quality framework around volume, recent momentum, and local support/resistance context. The result is a filtered pin bar workflow designed for traders who want cleaner chart annotation rather than a raw pattern dump. This tool focuses on one specific job: identifying rejection candles with a measurable structure and presenting them with a readable quality label directly on the chart. It is intended to help users inspect potential reaction points, not to replace broader market context or execution rules. The visual design is intentionally simple at the core: pin bar body highlighting, wick emphasis, directional markers, and compact quality labels. This makes the script suitable for traders who want candle-based context without converting the chart into a full market-structure dashboard. Unique Edge The distinctive feature of this script is that it does not stop at pattern detection. A standard pin bar script often marks candles only because they have a long wick. This script goes further by checking whether the wick is large enough relative to the body, whether the body itself is small enough relative to the full candle range, and whether one wick clearly dominates the other. That combination helps reduce ambiguous candles that visually resemble pin bars but do not express clean rejection. After the structural test, the script applies a three-part quality model: - volume confirmation - momentum context - support/resistance proximity This creates a practical quality hierarchy rather than a binary pattern label. In other words, the script is not only asking “Is this a pin bar?” but also “How much contextual support does this pin bar have?” An optional piercing check is also available for users who want stricter validation. This adds another layer of selectivity by requiring the candle body to show stronger positional behavior relative to the prior bar. Methodology The script starts by measuring the current candle: - candle body size - full candle range - upper wick length - lower wick length - dominant wick versus body ratio A raw pin bar candidate requires: - a minimum wick/body ratio - a maximum body percentage of full range - directional wick dominance This helps define whether the candle is a legitimate bullish or bearish rejection structure. Bullish pin logic is based on lower-wick dominance. Bearish pin logic is based on upper-wick dominance. Once a raw pin bar is detected, the script evaluates three contextual filters. 1) Volume filter The current volume can be compared against a moving average of volume. This helps identify candles that form with relatively stronger participation. 2) Momentum confirmation The script can check whether recent candles were moving in the opposite direction of the current pin bar. For example, a bullish pin bar becomes more meaningful when it forms after short-term downward pressure, while a bearish pin bar becomes more meaningful after short-term upward pressure. 3) Support / resistance proximity The script tracks pivot-based reference levels and checks whether the pin bar forms close to a recent local support or resistance area, using an ATR-based distance threshold. Each passed filter contributes to the final quality score. This produces a compact tiered output instead of a single undifferentiated signal stream. Signals & Alerts The script can identify: - bullish pin bars - bearish pin bars - higher-quality pin bars based on the selected minimum score Visual elements may include: - body highlighting on detected pin bars - wick emphasis - directional arrow markers - quality labels with contextual details - an information panel summarizing the active state The quality label can display the signal tier and relevant confirmations such as: - wick/body ratio - volume confirmation - momentum confirmation - support/resistance proximity Alert conditions are available for: - bullish pin bars - bearish pin bars - prime-quality pin bars - any valid pin bar that meets the selected score threshold This allows users to align alerts with their own strictness settings rather than monitoring every possible candle manually. Key Inputs Important user controls include: - minimum wick/body ratio - maximum body percentage of full range - wick dominance threshold - optional piercing requirement - volume filter enable/disable - momentum filter enable/disable - support/resistance filter enable/disable - minimum quality score - label size - panel display - maximum number of displayed signals These settings make the script adaptable across different instruments and chart styles. Users who prefer a broader scan can lower the strictness, while users who want fewer but cleaner signals can raise the thresholds. Limitations & Transparency This script is a rule-based candle-quality filter. It is not a market prediction engine, and it does not attempt to classify broader trend structure, liquidity behavior, or macro regime by itself. A pin bar can still fail even when all filters pass. A visually strong rejection candle is not automatically a durable reversal. Context such as higher-timeframe structure, trend state, volatility regime, session behavior, and instrument-specific character still matters. Support and resistance detection in this script is pivot-based and proximity-based. It is designed as a practical contextual filter, not as a complete structural mapping model. Volume behavior also varies by asset and market type. On some instruments, especially where centralized volume data is limited or interpreted differently, the volume filter should be treated as a supplementary input rather than a universal truth test. The momentum check is intentionally compact and local. It is meant to improve candle context, not to replace broader directional analysis. For these reasons, the script is best used as a chart-reading assistant within a larger process, not as a standalone decision framework. Risk Disclosure This script is provided for technical analysis and chart annotation purposes only. It highlights selected pin bar conditions based on user-defined structural and contextual rules. It does not provide financial advice, investment advice, or guaranteed trade outcomes. Markets can remain irrational, trend continuation can invalidate rejection candles, and false positives can occur in all timeframes and asset classes. Users should validate the script on their own instruments, timeframes, and risk models before relying on it in live conditions. Position sizing, stop placement, execution discipline, and overall trade management remain the responsibility of the user. In summary, AG Pro Pin Bar Quality Filter is designed to help traders study rejection candles with more structure, more selectivity, and cleaner on-chart presentation than a basic pin bar marker, while remaining transparent about what the script does and does not do.
Penunjuk Pine Script®
oleh AGProLabs
2
AG Pro Engulfing Candle Quality [AGPro Series]AG Pro Engulfing Candle Quality Overview / What it does AG Pro Engulfing Candle Quality is a price action overlay designed to detect bullish and bearish engulfing candles and then grade them through a structured quality framework instead of treating every engulfing event as equally important. Rather than marking all engulfing candles with the same visual weight, this script evaluates whether the candle shows characteristics that may make the event more meaningful in context. The goal is to reduce low-value pattern noise and help the user focus on engulfing candles that display stronger internal structure and better surrounding conditions. The script can color qualifying candles, display score labels directly on the chart, add optional background emphasis, and summarize recent signal state through an information panel. This makes it suitable for traders who want a cleaner way to review engulfing behavior without turning the chart into a generic pattern map. In practical use, the script is not intended to predict direction on its own. It is designed as a filtering and chart-reading aid for users who already work with structure, liquidity, support/resistance, trend context, or discretionary execution rules. Unique Edge Many engulfing tools stop at pattern detection. This script takes a different approach by treating engulfing candles as a quality event rather than a binary event. Its core difference is the scoring model. Each qualifying candle is evaluated through a multi-factor framework that can include relative volume behavior, body-to-range efficiency, prior directional context, engulf strength, and optional support/resistance proximity. This creates a 1-10 quality score that helps separate weaker engulfing events from stronger ones. The result is a more selective workflow: - detect the pattern, - evaluate the candle quality, - display only the events that meet the user’s threshold, - and keep the chart focused on higher-interest formations. This makes the script different from simple engulfing markers, basic candlestick libraries, or broad pattern collections. Its purpose is not to label everything. Its purpose is to rank and filter. Methodology The script identifies bullish and bearish engulfing conditions using configurable detection logic. Users can choose a stricter close-based interpretation or a broader wick-based interpretation depending on how selective they want the pattern engine to be. Once an engulfing candle is detected, the script evaluates the event with a weighted quality framework. The conceptual components include: 1. Relative volume The candle is compared against a moving average of volume. A candle that forms with stronger-than-normal participation can receive a higher quality contribution than one forming on ordinary or weak activity. 2. Body efficiency The candle body is evaluated relative to the full range. A larger, more decisive body may indicate stronger commitment than a candle with excessive wick noise and a relatively small real body. 3. Prior directional context The script reviews recent directional pressure over a user-defined lookback window. This helps distinguish engulfing candles that appear after a more meaningful opposing move from those that form in flatter or less informative conditions. 4. Engulf strength The script can incorporate how convincingly the current candle overtakes the prior candle structure, adding another layer beyond simple pattern recognition. 5. Optional support/resistance proximity Users can enable an additional contextual bonus when the engulfing event forms near pivot-derived support or resistance areas. These components are normalized into a score from 1 to 10. The score is then used for chart display, filtering, and alerts. This means the script is not simply asking whether an engulfing candle exists. It is asking whether the engulfing candle appears to have enough internal and contextual quality to deserve attention. Signals & Alerts The script can display: - bullish engulfing events, - bearish engulfing events, - candle coloring for qualified signals, - optional score labels, - optional background highlights, - and a chart panel summarizing recent signal state. Alerts are deterministic and based on confirmed rule conditions inside the script. Users can create alerts for: - bullish engulfing events, - bearish engulfing events, - high-quality bullish engulfing events, - high-quality bearish engulfing events, - or any engulfing event that meets the selected minimum score threshold. As with any chart tool, users should understand that alerts reflect the script’s rules, not an outcome guarantee. An alert means the selected condition has been satisfied according to the methodology. It does not imply that the next market move will be favorable. Key Inputs The script includes several controls so users can adapt the tool to different symbols and timeframes. Important inputs include: - minimum score required for display, - label cooldown to reduce visual clustering, - trend-strength lookback, - strict close-based or broader wick-based engulf logic, - bullish and bearish visibility toggles, - optional support/resistance bonus, - support/resistance pivot length, - ATR-based proximity setting, - scoring weights for volume, body efficiency, trend context, and engulf strength, - volume average threshold, - body/range threshold, - color controls for bullish, bearish, and score states, - label size, - background highlight toggle, - candle-coloring toggle, - score label visibility, - panel visibility, position, font size, and theme, - and minimum score required for alerts. These inputs allow the user to keep the script conservative and selective, or make it more permissive when reviewing more active charts. Limitations & Transparency This script is a rule-based visual analysis tool. It does not know future price action, and it does not confirm trade quality on its own. Several points are important: - An engulfing candle is still a local pattern. It can fail, especially in noisy or low-liquidity environments. - Strong scores do not guarantee continuation or reversal. - The support/resistance context is approximate and derived from pivot logic, not from a universal market map. - Volume behavior can vary across markets and data feeds. - Different timeframes can produce very different signal density and quality distribution. - The script is designed for confirmation and filtering, not for fully automated decision-making. Users should treat the score as a structured quality estimate, not as a promise. In many workflows, the script is most useful when combined with broader context such as market structure, trend bias, higher-timeframe levels, session behavior, or risk management rules. Risk Disclosure This script is provided for chart analysis and educational use. It is not financial advice, not an execution system, and not a guarantee of performance. All trading and investing involve risk. Market conditions can change quickly, and any pattern, score, or alert can fail. Users are responsible for their own analysis, entries, exits, and risk controls. Use the script as a decision-support tool, not as a substitute for judgment.
Penunjuk Pine Script®
oleh AGProLabs
2
AG Pro ORB Quality [AGPro Series]AG Pro Opening Range Breakout Quality OVERVIEW / WHAT IT DOES AG Pro Opening Range Breakout Quality is a session-structure indicator built to evaluate how price behaves around the Opening Range rather than treating every early breakout as equally meaningful. The script defines an Opening Range from a user-selected session window, locks that range when the session window ends, and then tracks whether price breaks above or below that range with constructive follow-through, delayed expansion, weak continuation, retest acceptance, or failure back into the range. Instead of acting like a simple breakout marker, this tool is designed to help organize the sequence that often matters most after the range is formed: range construction, first directional break, follow-through quality, retest behavior, acceptance, and failed continuation. This makes it more useful for traders who want a structured way to study whether the market is truly accepting price outside the Opening Range, or only probing beyond it temporarily. UNIQUE EDGE Most Opening Range tools focus mainly on drawing the range and marking the first break. This script is designed to go one step further by grading the quality of that break and the quality of post-break behavior. Its main edge is not the box itself. Its edge is the attempt to classify whether the move is: clean, good but delayed, weak, accepted after retest, or rejected back into the range. That makes the script conceptually different from a generic breakout overlay and also different from a broad market-structure or break-retest map. This indicator is specifically anchored to the Opening Range and to the behavior that follows that range. METHODOLOGY 1) Opening Range Construction The script builds an Opening Range from the chosen session window and stores: - range high - range low - optional midpoint 2) Break Detection After the range is locked, the script scans for the first qualified directional break within a defined search window. 3) Quality Engine Once a break appears, the script evaluates it using a rules-based scoring framework. The score can incorporate factors such as: - displacement beyond the range - body efficiency versus wick behavior - timing of the break relative to the range lock - optional relative volume context - directional alignment versus a moving average reference - post-break extension quality - retest depth and retest acceptance 4) State Transition Logic The script then maps price behavior into structured states such as: - Building Range - Watching Break - Bull Break Detected - Bear Break Detected - Bull Acceptance - Bear Acceptance - Failed Back In - Range Expired 5) Visual Organization The chart can display the Opening Range, the active acceptance zone, and projected target levels so that the user can visually compare the range location, the active accepted area, and nearby expansion references. SIGNALS & ALERTS The script can generate alerts for: - break events - acceptance events - failure events These alerts are intended to notify the user when a defined state transition occurs under the script's internal rules. They should be treated as workflow events, not as standalone trading instructions. KEY INPUTS Opening Range - Session Label - Opening Range Session - Timezone - Engine Timeframe - Range Extension Bars - Show Midline Quality Engine - Late Break Threshold - Acceptance Confirmation Bars - Break Search Window - Failure Tolerance - Relative Volume Length - Use Volume in Score Projected Targets - Show Targets - T1 / T2 / T3 - Target Multipliers - Target Ray Width - Target Label Style Style - Theme - State Labels - Background Tint - Label Size - Label Mode - Hero OR display - Acceptance Ribbon - Minimal OR Tag - Right-side layout controls Panel - Panel Position - Panel Font Size - Score Meter HOW THIS SCRIPT IS DIFFERENT This script is not meant to be a general-purpose support/resistance map, and it is not meant to be a broad break-retest engine applied to every chart structure. Its scope is narrower by design. The entire logic is centered on the Opening Range and what happens immediately after that range is established. Because of that, the script is more session-specific and more sequence-specific than many broader structure tools. It is also not a plain "Opening Range breakout = signal" overlay. A break can still be weak, late, accepted after retest, or rejected back into the range. That distinction is the core of the script. LIMITATIONS & TRANSPARENCY This is a rules-based interpretation tool, not a predictive model. The score is an internal quality estimate derived from the script's selected factors and thresholds. It should not be treated as an objective market truth. Opening Range behavior can vary significantly by instrument, volatility regime, session participation, and timeframe. A configuration that is useful on one symbol may not behave the same way on another. Projected targets are reference expansions based on the script's range logic. They are not guarantees, forecasts, or required destinations. Retest and acceptance behavior are also dependent on the selected engine timeframe. Lower engine timeframes may capture more detail, while higher ones may smooth some intrabar behavior. Users should review settings carefully and test the script on the instruments and sessions they actually follow. WHAT IT IS NOT This script is not: - a guarantee of breakout continuation - a promise that every accepted break will trend - a substitute for independent risk management - a standalone reason to enter or exit a trade - financial advice RISK DISCLOSURE This indicator is provided for educational and analytical use. All trading involves risk. Markets can reverse quickly, fail to follow through, or invalidate a setup even when a breakout initially looks constructive. Use the script as a structured chart-reading aid, not as a certainty engine. Position sizing, stop placement, execution quality, liquidity conditions, and broader market context remain the user's responsibility. If you use alerts, projected targets, or the quality score in a workflow, they should be interpreted within a broader decision process rather than in isolation.
Penunjuk Pine Script®
oleh AGProLabs
2
Confluence Order Blocks | ProjectSyndicateConfluence Order Blocks automatically identifies and validates high-probability, non-repainting Order Blocks. It filters for structural quality using displacement, normalizes all zone heights for consistency, and embeds a live multi-timeframe confluence engine inside every zone to provide a quantifiable, data-driven edge. 🧠 Live Multi-Timeframe Engine — This is not a single-timeframe tool. Every OB zone displayed on the chart is the result of a live, proximity-based confluence engine scanning three independent higher timeframes (e.g., M15, M30, H1) simultaneously. Each label shows exactly how many timeframes confirmed the zone, its composite strength rating (0-10), the session it formed in, its age, and its exact pip height, giving you an instant structural edge. 🎯 Displacement-Confirmed OBs — The engine doesn't just mark swing points. It validates each OB on the higher timeframes by requiring a powerful move away from the candle — a "displacement" — that is a user-defined multiple of the zone's range. This filters out weak or insignificant zones and focuses only on OBs that have demonstrated true market-moving intent before they are even considered for merging. 🎨 ATR-Normalized Zones — Eliminates visual noise from inconsistent zone sizes. This feature forces every merged OB zone to a uniform, ATR-based height (e.g., 0.75x ATR). This provides a clean, consistent chart and allows for a more objective analysis of price interaction with zones of equal visual weight, preventing massive tower blocks from distorting the chart. 📊 Proximity-Based Merging — Timeframes rarely align perfectly to the pip. The confluence engine uses an intelligent ATR-based proximity tolerance (e.g., 2.0x ATR) to detect when order blocks from different timeframes are clustered in the same price territory. It then mathematically merges them into a single, high-probability "Confluence Zone," ensuring you don't miss valid setups due to minor price discrepancies across timeframes. ✅ Chart-Timeframe Independent — The engine's credibility comes from its architectural stability. Unlike standard MTF indicators that repaint or shift zones depending on the chart you are viewing, this engine runs a completely stateless detection algorithm. The merged zones you see on an M1 chart are mathematically identical to the zones you see on an M5 or M15 chart. 🔧 Fully Customizable — Control every aspect of the engine, including the 3 target timeframes, the Minimum Timeframe Confluence threshold (e.g., require 3 out of 3 TFs), the Proximity Tolerance multiplier, the Minimum Strength Filter, and the colors/visibility of Bullish and Bearish zones. 🔬 Why this algo is unique: Standard Order Block indicators are subjective — often just drawing boxes on the current timeframe's last up/down candle before a swing, with no proof of higher-timeframe alignment. The Confluence OB Engine transforms this subjective tool into an objective, multi-dimensional trading instrument. It doesn't just show you a zone; it proves that the zone is backed by institutional intent across multiple timeframes, merging them into a single, undeniable area of interest on the exact chart you are viewing. 🌐 Apply to Gold (XAUUSD), Indices (US30, NAS100), Forex Majors, and Crypto on M1 or M5 execution timeframes while tracking M15, M30, and H1 structures. The engine is designed for assets that exhibit clear swing structures and respect deep supply/demand dynamics. 🗂️ How to use this? The most critical metric is the Timeframe Confluence Count and the Strength Rating. A zone confirmed by 3 timeframes with a Strength of 8.0+ indicates a massive structural edge. Consider only taking trades from these high-confluence zones that align with the prevailing higher-timeframe trend. The embedded label also shows the exact "pips away" distance, allowing for precise limit order placement. ⚙️ IMPORTANT NOTICE: This indicator is a professional-grade tool designed to identify structural confluence. It should NOT be used as a standalone signal for entering trades blindly. Always use it in conjunction with your own trading strategy, price action analysis, and strict risk management to confirm trade setups.
Penunjuk Pine Script®
oleh ProjectSyndicate
1
Bastion Level Sentinel [JOAT]Bastion Level Sentinel Introduction The Bastion Level Sentinel is an open-source dynamic support and resistance overlay that derives price levels from EMA rounding, then builds conviction scores through touch-based strength analysis with optional volume confirmation. Rather than drawing static horizontal lines at arbitrary prices, BLS rounds an EMA to a configurable price increment (e.g., 500, 1000) to identify the institutional-grade price rails that the market naturally gravitates toward. Each time price interacts with a rail, the indicator counts and classifies the touch — validated (with above-average volume) or unconfirmed (low volume) — and uses these counts to build a conviction score that drives the visual intensity of the level through color gradients. Most support/resistance indicators either use fixed pivot points that become stale, or they require manual drawing. BLS automates the process by anchoring levels to a moving EMA foundation, resetting touch counts when levels shift, and providing a complete lifecycle view of each level — from nascent (newly formed) through seasoned to ancient. The conviction engine ensures that levels with more validated touches appear visually stronger, giving traders an immediate sense of which levels carry the most institutional weight. Core Engine: Level Derivation The level calculation is straightforward but effective: float emaVal = ta.ema(close, emaLen) float topLvl = roundVal * math.ceil(emaVal / roundVal) float botLvl = roundVal * math.floor(emaVal / roundVal) The EMA provides a smoothed price anchor. Rounding up to the nearest increment gives the ceiling rail (resistance), and rounding down gives the floor rail (support). The grid increment is fully configurable — use 500 for crypto, 50 for stocks, 10 for forex — allowing the indicator to adapt to any instrument's natural price structure. A stability check ensures that levels are only considered active when they remain unchanged from the previous bar. This prevents false touch counts during level transitions. Conviction Engine (Touch-Based Strength Scoring) The conviction engine is the heart of BLS. Every time price enters a rail's proximity zone (defined by a configurable tolerance fraction of the level gap), a touch is registered. Touches are edge-triggered — only the first bar of each interaction counts, preventing a single extended visit from inflating the score. When volume confirmation is enabled, touches are classified into two categories: Validated Touches: Price interacts with the rail while short-term volume exceeds the configurable threshold (default 1.2x average). These carry 70% weight in the conviction score. Unconfirmed Touches: Price interacts with the rail on below-average volume. These carry 30% weight — they still count, but with reduced conviction. The conviction score scales from 0% to 100% based on the number of touches relative to the saturation threshold (default 5 touches for 100%). When levels shift (the EMA moves enough to change the rounded level), all touch counts reset to zero, and the lifecycle begins fresh. Level Lifecycle and Maturity Each rail tracks its age in bars since the last level shift: NASCENT: Fewer than 50 bars old — newly formed level, conviction still building SEASONED: 50-200 bars old — established level with meaningful touch history ANCIENT: Over 200 bars old — long-standing level that has persisted through extended price action Ancient levels with high conviction scores represent the strongest support/resistance zones — they have been tested repeatedly over a long period and have held. Visual Architecture Primary Rails: Ceiling and floor levels plotted with conviction-driven color gradients. Low conviction = neutral purple, high conviction = vivid red (resistance) or green (support). The color intensity directly communicates level strength. Proximity Halos: Tolerance zone boundaries around each rail, filled with transparency that scales with conviction. Stronger levels have more visible halos. Equator Line: The midpoint between ceiling and floor — a natural equilibrium reference. Tertiary Gridlines: 25% and 75% sub-levels between the rails, providing additional structure within the grid. Proximity Aura: Subtle background tint when price enters a rail's tolerance zone — immediate visual alert that price is near a significant level. Grid Tint Candles: Candles colored by their position within the grid — red tones near the ceiling, green tones near the floor, purple at the equator. Signal Architecture BLS generates five distinct signal types, all confirmed-bar and edge-triggered: RAIL LOCK (Validated Touch): Price interacts with a rail on confirmed volume. The label includes the running touch count. These are the highest-confidence interaction signals. ECHO (Unconfirmed Touch): Price interacts with a rail but volume is below the confirmation threshold. The interaction is noted but flagged as lower confidence. BREACH: Price closes beyond a rail — a potential breakout (ceiling) or breakdown (floor). These are edge-triggered crossover/crossunder signals. APPROACH: Price enters a rail's proximity zone for the first time — an early warning that an interaction is imminent. Conviction Pulse: Periodic labels on the rails (every 20 bars) showing the current conviction percentage, providing at-a-glance strength information without cluttering the chart. // Edge-triggered touch detection bool topTouchEdge = topTouch and not topTouch bool botTouchEdge = botTouch and not botTouch Command Panel (Dashboard) An 11-row monospace dashboard displays: CEILING: Current resistance rail price C CONV: Ceiling conviction — validated/total touches with percentage (e.g., "3v/4t (85%)") FLOOR: Current support rail price F CONV: Floor conviction — validated/total touches with percentage EQUATOR: Midpoint price between ceiling and floor NEAREST: Which rail price is closest to, with distance as a percentage GRID POS: Price position classification (Ceiling Zone, Upper Grid, Equator, Lower Grid, Floor Zone) MATURITY: Lifecycle stage of each rail (Nascent, Seasoned, Ancient) LOCKED: Whether each rail is currently stable (unchanged from previous bar) FLUX: Current volume confirmation ratio — values above the threshold indicate "hot" volume Input Parameters Fortress Grid: Lattice Anchor: EMA period for level derivation (default 21) Grid Increment: Price rounding value (default 500) — adjust for your instrument Proximity Radius: Fraction of level gap used as tolerance zone (default 0.15) Tertiary Gridlines: Toggle 25%/75% sub-levels Conviction Engine: Conviction Saturation: Touches needed for 100% conviction (default 5) Flux Validation: Require above-average volume for validated touches (default on) Flux Threshold: Volume ratio required for validation (default 1.2x) Optics Layer: Individual toggles for: Primary Rails, Proximity Halos, Equator Line, Command Panel, Proximity Aura, Breach Flash, Conviction Pulse, Approach Beacon, Grid Tint Candles How to Use This Indicator Adjust the Grid Increment to match your instrument — 500 or 1000 for BTC, 50 or 100 for stocks, 10 or 25 for forex pairs. The goal is to identify the round-number levels that institutional orders cluster around. Pay attention to conviction scores — rails with 80%+ conviction and SEASONED or ANCIENT maturity are the strongest levels. Expect significant reactions when price approaches them. RAIL LOCK signals with high touch counts indicate levels that have been tested and held multiple times. These are prime candidates for bounce trades. BREACH signals mark potential breakouts. A breach of a high-conviction rail is more significant than a breach of a low-conviction one. Use APPROACH signals as early warnings to prepare for potential level interactions. They give you time to assess the setup before the actual touch occurs. The Grid Position metric in the dashboard tells you where price sits within the current structure — useful for bias determination and risk assessment. Limitations EMA-derived levels are inherently lagging — they reflect where the market has been, not where it is going. Levels shift when the EMA moves enough to change the rounded value. The rounding approach works best on instruments with natural round-number psychology (crypto, indices, large-cap stocks). It may be less effective on instruments without clear round-number clustering. Touch counts reset when levels shift, which means conviction history is lost during transitions. This is by design (stale counts on new levels would be misleading) but means newly formed levels always start at zero conviction. Volume confirmation depends on reliable volume data. Instruments with inconsistent volume reporting may produce unreliable validation classifications. The indicator identifies levels and measures their strength but does not predict whether price will bounce or break through. That decision requires additional context. Originality Statement This indicator is original in its conviction-based level strength scoring approach. While EMA-derived support/resistance and touch counting are known concepts individually, BLS is justified because: The conviction engine differentiates between volume-validated and unconfirmed touches, weighting them differently to produce a more meaningful strength score than simple touch counting. Level lifecycle tracking (Nascent/Seasoned/Ancient) provides temporal context that static level indicators lack. Conviction-driven color gradients using color.from_gradient create an immediate visual hierarchy where stronger levels are visually more prominent. The proximity halo system with conviction-scaled transparency provides zone-based level visualization rather than single-line levels. Edge-triggered touch detection with stability checks prevents false counts during level transitions and extended visits. The comprehensive dashboard presents level prices, conviction breakdowns, maturity, grid position, and volume state simultaneously. Five distinct signal types (Rail Lock, Echo, Breach, Approach, Conviction Pulse) provide a complete interaction vocabulary for level-based analysis. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. Support and resistance levels describe historical price interaction zones but do not guarantee future reactions. Levels can and do break. Always use proper risk management and conduct your own analysis before making trading decisions. The author is not responsible for any losses incurred from using this tool. -Made with passion by officialjackofalltrades
Penunjuk Pine Script®
oleh officialjackofalltrades
AG Pro Volume Profile Acceptance Ladder [AGPro Series]AG Pro Volume Profile Acceptance Ladder Overview / What it does AG Pro Volume Profile Acceptance Ladder is a volume-structure indicator designed to monitor whether price is building acceptance, holding acceptance, or losing acceptance inside a rolling volume-defined band. Instead of treating volume profile as a static reference snapshot, this script tracks acceptance as a progressive process. The goal is not to predict where price must go next, but to help the user read whether the market is spending enough time and participation inside a value zone to justify calling that area accepted. The script builds a rolling profile window, estimates the active acceptance band, and then classifies current behavior into states such as Probe, Build, Accept, Shift Watch, Shift Confirmed, and Fail. This creates a ladder-style framework for reading when the market is stabilizing within one value region and when that acceptance may be migrating toward another region. In practice, that makes it useful for users who want a structured way to distinguish temporary interaction from more durable volume-based acceptance. A key design goal of this script is to separate acceptance progression from simple attraction-to-level logic. Some tools are built around whether price is pulled back toward a reference such as a POC or another central level. This script focuses on a different question: is the market actually building and holding acceptance inside a rolling value zone, and is that acceptance stable enough to be treated as an active auction area rather than a temporary touch. Because of that framing, the indicator is best read as a market-structure context tool. It maps an evolving acceptance zone, estimates a directional ladder bias, and provides state transitions that can be used to organize chart reading, scenario planning, or alert workflows. It is not an execution engine, not a broker-grade order book product, and not a substitute for independent trade management. Unique Edge The distinguishing feature of this script is that it treats acceptance as a staged process rather than a single level event. The output is not limited to a profile center or a value-area drawing. Instead, the script evaluates how price behaves relative to a rolling volume-defined band and converts that behavior into a progression model. That matters because a market can interact with a value area in very different ways. It can briefly probe it, begin building around it, hold it in a more stable manner, shift acceptance upward or downward, or fail to maintain acceptance altogether. By organizing those conditions into a ladder of states, the script attempts to make the auction process easier to read in real time. This also makes the indicator materially different from a standard POC-centered interpretation. The emphasis here is not on magnetic pull toward one volume reference. The emphasis is on whether acceptance is forming, strengthening, or migrating. In that sense, the script is better understood as an acceptance progression map than as a simple volume anchor display. Methodology The script uses a rolling lookback window and distributes bar-based volume across a defined number of bins in order to approximate a local volume profile. From that rolling profile it derives the active central reference, the current acceptance band, and the relative participation of that band within the profile window. Using those profile components, the script calculates several internal measures. These include how often price remains inside the band over a recent hold window, how often price re-enters the band after leaving it, how stable the band center is relative to recent values, and whether the active center appears to be migrating in a meaningful way. These measures are then blended into an aggregate acceptance score and a ladder bias. The state engine uses those components to classify behavior into the following progression states: - Reject - Probe - Build - Accept - Shift Watch - Shift Confirmed - Fail These states should not be read as guarantees of continuation or reversal. They are condition labels describing how the script currently interprets interaction with the active acceptance band. Signals & Alerts The script includes deterministic state-based alerts so users can build workflows around changes in acceptance conditions. Available alert events: - Acceptance Building - Acceptance Confirmed - Upward Ladder Migration Confirmed - Downward Ladder Migration Confirmed - Acceptance Failed - Acceptance Lost These alerts are designed to reflect state transitions inside the indicator logic. They do not imply expected profitability, win rate, or directional certainty. Key Inputs - Profile Window: Defines the rolling lookback used for the local profile estimate. - Bin Count: Controls the profile resolution. - Value Area %: Defines how much of the rolling profile volume is used to construct the active acceptance band. - Migration Sensitivity: Controls how easily the script classifies center shifts as migration activity. - Probe Band Multiplier: Expands the outer interaction zone around the active acceptance band. - Hold Lookback: Defines the window used for hold and re-entry style calculations. - Theme / Panel Location / Panel Font Size / Label Font Size: Presentation controls for chart readability. - Show Previous Acceptance Band / Show State Markers / Forward Extension Bars: Visual controls for context and labeling. Limitations & Transparency This script does not use exchange-native tick-by-tick volume profile data. It uses a bar-based approximation built from the information available to Pine Script on the chart. As a result, the acceptance band and profile structure shown by the indicator should be interpreted as a model of local volume distribution, not as a perfect reconstruction of exchange-level auction detail. The ladder states are also model outputs, not objective market facts. Small changes in lookback, resolution, or volatility regime can influence how the script classifies the same area. Users should therefore treat the states as structured analytical context rather than as standalone instructions. The indicator is also not intended to replace broader market analysis. Trend structure, liquidity conditions, volatility regime, higher-timeframe context, and instrument-specific behavior can all affect how useful an acceptance reading is in practice. Risk Disclosure This script is for chart analysis and educational use only. It does not provide financial advice, investment advice, or trade recommendations. All markets involve risk, and no indicator can guarantee outcome, timing, or future performance. Users should apply independent judgment, test settings carefully, and use risk management appropriate to their own methodology. What this script is not - It is not a promise of continuation or reversal. - It is not a broker-grade volume profile engine. - It is not a substitute for execution planning or risk control. - It is not a claim that acceptance automatically leads to trend persistence.
Penunjuk Pine Script®
oleh AGProLabs
1
AG Pro Pivot Cluster Survival Map [AGPro Series]AG Pro Pivot Cluster Survival Map Overview / What it does AG Pro Pivot Cluster Survival Map is an overlay tool that evaluates the durability of nearby pivot clusters rather than focusing on a single pivot reaction. The script groups Daily, Weekly, and Monthly Classic Pivot levels when they compress into the same price neighborhood, then measures how well that cluster has held up under repeated interaction. The goal is not to label every pivot touch as strong or weak. The goal is to show whether a pivot-derived zone has continued to absorb pressure, remain structurally relevant, or lose stability over time. This makes the script suitable for users who want to monitor confluence-based pivot structure instead of isolated one-bar reactions. The visual model is intentionally compact. The script highlights the nearest upper cluster and the nearest lower cluster, assigns a survival score to each side, and displays a pressure readout for the dominant active zone. The result is a map of pivot-cluster durability, not a generic support/resistance overlay and not a simple reaction detector. Unique Edge The distinguishing feature of this script is its focus on pivot-cluster survival. Many pivot tools concentrate on one level at a time. Many reaction tools classify the immediate response after a touch, reclaim, or rejection. This script approaches the problem differently. It asks whether multiple pivot levels from different higher timeframes are compressing into the same zone, and whether that zone is still surviving repeated market interaction. That difference matters. This script does not score a single bounce. It does not try to predict a reversal from one isolated pivot event. It evaluates whether a pivot cluster remains durable after tests, inside-zone pressure, breaches, and time spent without structural failure. Within the AG Pro catalog, this script is materially different from AG Pro Pivot Points Reaction Map. Pivot Points Reaction Map is centered on reaction quality at pivot levels. Pivot Cluster Survival Map is centered on cluster durability, confluence density, and survival under pressure. In other words, one evaluates the response; the other evaluates the staying power of the pivot cluster itself. It is also different from broader level-survival or support/resistance tools because the source engine here is explicitly pivot-derived. The script is built around Daily, Weekly, and Monthly Classic Pivot families, then transformed into a confluence-survival framework. Methodology The current version uses Classic Pivot calculations from higher timeframes. 1. Daily, Weekly, and Monthly pivot levels are collected. 2. Nearby pivot levels are grouped into clusters when they fall within the active cluster width. 3. The script selects the nearest upper cluster and the nearest lower cluster relative to current price. 4. Each selected cluster is evaluated with a survival model. The survival model is based on factors such as: - cluster density - higher-timeframe participation - repeated tests - rejection behavior - inside-zone pressure - breach frequency - time since structural failure A higher survival score suggests that the cluster has remained more durable under recent interaction. A higher pressure reading suggests that the cluster is experiencing more structural stress. The chart display is intentionally selective. Instead of plotting every pivot line independently, the script concentrates on the nearest relevant clusters and presents them as zones with a backbone line and state label. This is designed to keep the structure readable. States / Signals The script uses state-based interpretation rather than directional promises. Typical state classifications include: - Stable - Strengthening - Balanced - Under Stress - Fragile - Failed These states are derived from the relationship between survival and pressure. They are meant to describe the condition of the cluster, not to issue a guaranteed trading outcome. The panel summarizes: - nearest upper cluster - nearest lower cluster - dominant survival side - cluster pressure - pivot mix currently included in the model The script can also generate alert conditions for: - cluster strengthening - cluster failure - cluster reclaim behavior These alerts are deterministic conditions derived from the script logic. They are informational and should be interpreted within a broader market workflow. Key Inputs Pivot Formula This version is intentionally limited to Classic Pivots in order to keep the clustering and scoring model consistent. Include Daily / Weekly / Monthly These settings control which higher-timeframe pivot families are included in the cluster engine. Cluster ATR Width Controls how aggressively nearby pivot levels are merged into the same cluster using ATR-based spacing. Cluster Percent Width Adds a percentage-based width floor so clusters remain practical across different price scales. Minimum Levels Per Cluster Controls how many pivot levels are required before a true cluster is recognized. Survival Lookback Defines the observation window used for the durability calculations. Visual Controls The script includes settings for cluster visibility, labels, backbone lines, panel location, and font sizes. Limitations & Transparency This script is a structural reading tool. It is not a prediction engine. A high survival score does not guarantee that price will reverse, hold, or trend from that area. A low survival score does not guarantee immediate failure. The values should be read as condition metrics for pivot-derived zones. Because the script groups pivot levels into clusters, output can vary depending on volatility, symbol characteristics, and timeframe context. On some symbols, one side may show a stronger cluster than the other. On some charts, one side may temporarily rely on a weaker fallback anchor when cluster density is limited. This script does not attempt to replace market structure analysis, higher-timeframe context, liquidity analysis, or risk management. It is intended to organize pivot confluence into a readable survival framework. What this script is not: - not a buy/sell signal engine - not a guarantee of support or resistance - not a standalone trade system - not a future-price prediction model Risk Disclosure This script is for chart analysis and decision support only. It does not provide financial, investment, or trading advice. Markets can move unpredictably, and no indicator can eliminate risk. Users should evaluate signals, states, and cluster conditions together with their own process, timeframe alignment, and risk controls before making any decision.
Penunjuk Pine Script®
oleh AGProLabs
1
AG Pro Support Resistance Reaction Map [AGPro Series]AG Pro Support Resistance Reaction Map Overview / What it does This indicator maps horizontal support and resistance zones from confirmed price structure, then evaluates how price reacts when it returns to those zones. Instead of treating every level touch as equally important, the script focuses on whether the interaction looks constructive, weak, or potentially broken. The core objective is to make structural reactions easier to read on-chart. Confirmed pivot highs and lows are converted into zones, nearby levels are merged, older levels can expire, and the chart prioritizes the most relevant active zones on each side of price. When price re-enters a zone, the script grades the reaction and can display labels such as Clean Hold, Sharp Reject, Soft Bounce, or Break Confirmed. This publication is designed as an indicator, not as an execution engine. It does not place trades, predict future returns, or guarantee that a level will hold. Its purpose is to help traders organize structural context and evaluate reaction quality in a more systematic way. Unique Edge Support and resistance is a classic concept, so the difference here is not the concept itself but the workflow built around it. This script is not a generic auto-drawing tool that tries to plot every possible line. It is a reaction map. The emphasis is on how price behaves inside a structural zone, not on covering the chart with as many levels as possible. The script differs from tools that are primarily centered on pivot formulas, breakout-retest grading, moving-average reclaim logic, or channel structure. Here, the focus is horizontal structural memory and the quality of the live interaction with that memory. In practice, that means the script is trying to answer questions such as: - Is this support still reacting constructively? - Is this resistance rejecting cleanly or absorbing pressure? - Is the latest touch just noise, or is it a more meaningful retest? - Which nearby intact levels still deserve attention right now? Another important distinction is the panel logic. The compact panel does not attempt to summarize all historical levels. It highlights the nearest intact support below price and the nearest intact resistance above price, along with their state, raw versus qualified touch count, and the latest recorded reaction. Methodology 1) Structural level detection Confirmed pivot highs and lows are used to create horizontal support and resistance zones. The script waits for confirmation rather than guessing unfinished pivots. 2) Zone construction Each level is converted into a zone using an ATR-based width. This keeps the plotted area adaptable instead of forcing the same fixed width on all markets and all volatility environments. 3) Merge logic Nearby levels of the same type can be merged when they fall within the selected merge distance. This helps reduce duplication and keeps the map cleaner. 4) Age and visibility control Older levels can expire, broken levels can be hidden or faded, and the script visually prioritizes the nearest intact zones. This is intended to improve readability rather than preserve every historical level forever. 5) Reaction scoring When price newly enters a live zone, the script evaluates the interaction using factors such as penetration depth, close location inside or outside the zone, candle body bias, impulse, and whether the touch is the first qualified retest. The result is translated into a reaction label and a quality score. 6) Touch accounting The script tracks both Raw and Qualified touches. Raw touches represent zone entries. Qualified touches are stricter and require a fresh entry plus cooldown spacing, which helps avoid counting clustered bars as repeated independent retests. Signals & Alerts The script can generate labels and alerts around the most important structural interactions. Main reaction labels: - Clean Hold - Sharp Reject - Soft Bounce - Break Confirmed - Failure Risk Main alert conditions: - Bullish Level Reaction - Bearish Level Reaction - Level Break Confirmed These labels and alerts are descriptive, not predictive. They summarize the current structural interaction detected by the script. They are not trade instructions and should not be interpreted as a promise of continuation or reversal. Key Inputs Levels - Pivot Strength - Maximum Active Levels - Zone Width (ATR Multiplier) - Merge Distance (ATR Multiplier) - Level Expiry (bars) Reaction Engine - Retest Cooldown (bars) - First-Touch Bonus - Keep Broken Levels Visible Visuals - Show Reaction Labels - Show Compact Panel - Visible Zones Per Side - Emphasize Nearest Levels - Show Soft Bounce Labels - Minimum Label Score - Minimum Bars Between Side Labels - Label Stagger (bars) - Broken Level Fade - Base Zone Opacity - Label Offset (ATR) - Label Size - Panel Text Size Panel - Panel Location - Panel Theme (Dark / Light) Limitations & Transparency - Pivot-based levels are confirmed after the selected pivot strength completes, so the script is intentionally reactive rather than anticipatory. - Zone width is ATR-based, which means the visual footprint of levels will change with volatility. - Raw and Qualified touch counts are intentionally different. Qualified touches are filtered by entry logic and cooldown, so they will usually be lower than raw counts. - The compact panel is selective. It shows the nearest intact support and the nearest intact resistance, not a full inventory of every level on the chart. - Visibility controls are designed to keep the chart readable. As a result, some valid but lower-priority levels may be de-emphasized or hidden from the main view. - Support and resistance remains interpretive by nature. No horizontal level works in isolation across all symbols, timeframes, or market regimes. Risk Disclosure This indicator is a chart-analysis tool. It is not a broker, a signal service, or an automated trading system. It does not provide investment advice and it does not guarantee that any level will hold, reject, or break in a particular way. All markets involve risk. Price can invalidate a structural zone quickly, especially during news events, regime shifts, or low-liquidity conditions. Use the script as one part of a broader decision process that includes market context, liquidity conditions, timeframe alignment, and risk management.
Penunjuk Pine Script®
oleh AGProLabs
3
Studio: Market Structure (SMS)📊 Studio Market Structure (SMS) Studio Market Structure (SMS) is a price-action based market structure indicator designed to visually map swing highs, swing lows, and key structural levels for intraday trading, scalping, and trend analysis. ⭐ Purpose The indicator helps traders understand: Market structure shifts Trend continuation vs reversal Support & resistance formation Liquidity zones created by swings Clean decision areas for entries and exits Instead of relying on lagging indicators, SMS focuses purely on price structure, which institutions and professional traders follow. 🔎 What the Indicator Shows ✅ SH (Swing High) Levels Identifies important resistance zones where selling pressure previously appeared. ✅ SL (Swing Low) Levels Highlights support areas formed by market reactions. ✅ Structure Mapping Higher Highs (HH) Higher Lows (HL) Lower Highs (LH) Lower Lows (LL) These levels extend forward to act as future reaction zones. ⚡ Key Advantages Designed for 1- minute to intraday trading Removes chart noise Helps avoid fake breakouts Improves scalping timing Works across Index, Stocks, and Options Ideal for traders combining: Price Action Breakout Trading Intraday Scalping Structure-based Strategies 🧠 How To Use Bullish Bias Price holding above recent Swing Low Break above Swing High → continuation setup Bearish Bias Price failing below Swing High Breakdown of Swing Low → downside continuation Best used with: Volume confirmation VWAP / Trend filters Session timing filters 🎯 Recommended Timeframes 1m — Scalping 3m / 5m — Intraday 15m — Structure confirmation ⚠️ Notes This indicator provides structural guidance, not financial advice. Always use proper risk management. 👨‍💻 Developer Inder Singh 🌐 indersingh.com
Penunjuk Pine Script®
oleh studioAlgo
12
Resistance & Support Dynamic PRO [ChartWhizzperer]Resistance & Support Dynamic PRO | Algorithmic Zones by ChartWhizzperer The revolution in chart hygiene. Most support and resistance indicators share a massive flaw: they turn your chart into an unreadable mess of endless lines and boxes within hours. They possess no memory, no filters, and crucially – no logic for self-cleaning. As a system architect, I developed the Resistance/Support Dynamic™ PRO to solve this problem mathematically. This open-source indicator does not merely draw zones. It evaluates them, ages them, and purges them when they become obsolete. CORE FEATURES (Why this indicator is different): Smart Mitigation Protocol (Purge Logic): Once a zone has been breached or chopped by the market too many times, it loses its institutional relevance. The algorithm detects these structural breaks (strikes) and permanently purges the dead zone from the chart. No more ghosting. Alpha Decay Engine: Nothing lasts forever – especially not in trading. Zones fade over time (transparency scales mathematically with the zone's age). Current hotspots are highly visible, whilst older levels smoothly fade into the background. Volume Validation: Not every pivot point represents genuine Smart Money. If this filter is active, an S/R zone is only drawn if the origin candle exhibits above-average volume (SMA-verified). ATR-Based Sizing & Overlap Guard: The thickness of the zones dynamically adapts to market volatility (ATR). Furthermore, the overlap guard prevents new zones from being drawn over existing ones, preventing visual clutter. Examine the source code: This is not spaghetti code. It is highly efficient, object-oriented Pine Script (v6) featuring clean array management and User-Defined Types (UDTs). THE BITTER TRUTH OF TRADING (And the next logical step) This indicator provides you with the ultimate map. It shows you with clinical precision exactly where Smart Money has left liquidity. However, a map does not pull the trigger. Ask me for more! Disclaimer Signals and alerts are provided for informational purposes only and do not constitute financial advice or a recommendation to buy or sell. Trading involves substantial risk and may result in the total loss of capital. Execution via third-party tools may differ from alerts. Past performance is not indicative of future results.
Penunjuk Pine Script®
oleh ChartWhizzperer
19
AG Pro Pivot Points Reaction Map [AGPro Series]AG Pro Pivot Points Reaction Map Overview / What it does AG Pro Pivot Points Reaction Map is an overlay indicator designed to analyze how price behaves around classical pivot levels rather than only plotting those levels as static horizontal references. The script builds Daily or Weekly pivot structures from prior period OHLC data and then tracks the currently active pivot in order to highlight nearby price interaction, reaction quality, and short-term context. Instead of treating every pivot line equally at all times, the script uses an active-pivot framework. This allows the chart to stay focused on the level that is currently most relevant to price while still keeping broader pivot structure visible in the background. The goal is to help traders evaluate whether price is reacting constructively, rejecting, reclaiming, compressing, or losing a key pivot area. The visual design is intentionally split into two layers. The first layer is the classical pivot structure itself, including PP, R1, S1, and optional extended levels such as R2 and S2. The second layer is the reaction map built around the active pivot. This layer adds an ATR-based reaction zone, state detection, filtered event labeling, active context tags, and an information panel so the chart can communicate more than a simple “price above” or “price below” condition. This indicator is intended for chart analysis, workflow support, and structured market reading. It does not attempt to predict future prices, and it should not be interpreted as a standalone trade execution system. It is best used as a contextual overlay that helps organize price behavior around widely followed pivot references. Unique Edge The core distinction of this script is that it is not just another pivot plotting tool. Classical pivot indicators usually stop at drawing levels. This script continues one step further by evaluating reaction behavior around the currently active level. Its main differentiator is the active reaction framework. The script identifies a current pivot focus, builds a dynamic reaction zone around that level, and then classifies price interaction into states such as reclaim, loss, holding behavior, rejection behavior, and compression near pivot. This moves the indicator away from passive level display and toward structured price-context mapping. A second differentiator is the sticky active pivot logic. Instead of shifting focus too aggressively whenever price becomes marginally closer to a different level, the script attempts to keep chart attention anchored to the current active pivot until conditions justify a transition. This improves visual continuity and makes the chart easier to read during multi-bar interaction. A third differentiator is signal hygiene. Reaction labels can be filtered through cooldown logic, score thresholds, and event selection rules so that the chart remains readable. Major events can be emphasized while weaker or more repetitive reactions remain in the background. This helps preserve interpretability instead of overwhelming the screen with every minor touch. Finally, the script combines chart-side cues with a compact state panel. The panel reports the active pivot, pivot price, current distance, live state, last score, and directional bias. This allows users to scan the present context without losing the full visual relationship on the chart. Methodology The pivot engine uses prior Daily or Weekly OHLC values to construct standard pivot levels. These levels form the structural base of the indicator. Depending on settings, the script can display the central pivot point together with first and second resistance/support layers. From that structure, the script evaluates which pivot is currently most relevant to price and assigns that level as the active pivot. A sticky selection process is then used so the active focus does not rotate too easily on minor fluctuations. This helps the script behave more like a context map and less like a constantly flickering nearest-line tracker. Around the active pivot, the script builds a reaction zone using ATR. This means the mapped zone adapts to the instrument’s recent volatility rather than using a fixed absolute distance. A wider volatility environment naturally leads to a wider interaction zone, while a calmer environment keeps the zone tighter. Inside that zone, the script studies price behavior using a combination of position relative to the pivot, candle body structure, wick emphasis, and short-term displacement from the level. It also computes a reaction score designed to quantify how constructive or decisive the interaction appears under the script’s logic. Stronger reclaim or rejection characteristics can therefore stand out from weaker, noisier touches. The result is a layered read of market structure: - classical pivot references define the environment, - the active pivot identifies current relevance, - the ATR-based zone frames the interaction area, - event logic classifies notable reactions, - the panel summarizes the current state. Signals & Alerts The script can identify and label several reaction types around the active pivot. Depending on settings and score thresholds, these may include reclaim events, pivot loss events, reaction holding behavior, and reaction rejection behavior. In addition to chart labeling, the script includes alert conditions for major workflow events. These are designed to notify the user when price is showing a notable interaction around the active pivot. Available alert categories include bullish reaction confirmation, bearish reaction confirmation, pivot loss confirmation, compression near pivot, and active pivot changes. Because this is a contextual indicator rather than a complete strategy, alerts should be interpreted as informational events. They are intended to help users monitor evolving price behavior around important pivot areas, not to replace independent analysis, execution rules, or risk management. Key Inputs Pivot Anchor Selects whether the pivot structure is built from Daily or Weekly source data. Show R2 / S2 Allows the extended pivot structure to remain visible for users who want broader context beyond PP, R1, and S1. Base Pivot Line Width / Active Pivot Line Width Controls the visual hierarchy between background pivot references and the currently active pivot. Reaction Zone (ATR Multiplier) Defines the width of the active reaction zone relative to recent volatility. Wick Emphasis Adjusts how strongly wick behavior contributes to reaction interpretation. Signal Cooldown (Bars) Prevents labels and events from clustering too tightly during noisy price interaction. Show Reaction Labels / Label Mode / Minimum Label Score Controls which reaction labels appear on the chart and how selective the script should be. Focus Mode Adjusts how aggressively non-active pivot lines fade into the background. Reaction Label Size Changes the chart label size for reaction events and edge tags. Show Event Markers / Show Active Pivot Halo / Show Right Edge Active Tag Controls optional visual layers that can make the active structure easier to follow. Passive Context Tags Adds simplified right-edge tags for passive pivot references so faded background levels remain interpretable. Show Info Panel / Panel Position / Panel Theme / Panel Font Size Configures the summary panel to match user preference and chart layout. Limitations & Transparency This script is based on classical pivot concepts and volatility-adjusted reaction mapping. It does not know future price direction, and it does not forecast whether any pivot will hold or fail before price interacts with that area. Reaction labels and scores are formula-driven representations of the script’s internal logic. They are not objective truth statements about market intent, and they should not be interpreted as guaranteed support, guaranteed resistance, or guaranteed continuation/reversal behavior. Like all level-based overlays, the script can produce different impressions depending on the selected timeframe, instrument volatility, and chart conditions. Fast-moving instruments, low-liquidity environments, and sudden news-driven candles may reduce the practical value of any fixed structural framework, including pivots. The active pivot model is intentionally selective. That improves chart focus, but it also means the script emphasizes one current pivot context over other simultaneously visible levels. Users who want a broader or more aggressive level-tracking style may prefer different settings than the default configuration. The indicator is also not a backtesting engine and does not provide complete entry, exit, stop, or position sizing logic. It should therefore be used as one analytical component within a broader decision process. Risk Disclosure This indicator is for analytical and educational use only. It does not provide investment advice, trading advice, or financial advice. Markets involve risk. Price can move through pivot levels without respecting them, reaction quality can deteriorate quickly, and conditions that appear constructive on one bar can fail on the next. No indicator can remove uncertainty from live markets. Users should evaluate this script together with their own market framework, timeframe selection, execution process, and risk controls. Decisions involving capital should never rely on a single indicator, label, panel reading, or alert event in isolation.
Penunjuk Pine Script®
oleh AGProLabs
3
AG Pro Ichimoku Cloud Equilibrium Map [AGPro Series]AG Pro Ichimoku Cloud Equilibrium Map Overview / What it does AG Pro Ichimoku Cloud Equilibrium Map is an Ichimoku-based overlay designed to map balance, displacement, and return-to-balance behavior around a dynamic equilibrium core. Instead of using Ichimoku primarily as a traditional bullish/bearish checklist, this script reorganizes the framework around one structural question: where is price trading relative to its current equilibrium, and is that position balanced, expanding, overstretched, or reclaiming balance? The script blends Kijun-Sen with the cloud midpoint to build an equilibrium core, then expands that core into an adaptive equilibrium band using ATR and cloud thickness. From there, it classifies how price is behaving around that band and displays the result through chart states, optional labels, and a compact information panel. This script is intended as a chart analysis tool. It is built to help users read structure more efficiently, especially when standard Ichimoku layouts feel visually dense or interpretation-heavy. Unique Edge The main difference is that this script does not treat Ichimoku as a simple trend confirmation overlay. It converts the Ichimoku framework into an equilibrium map. Rather than focusing only on whether price is above or below the cloud, this script asks: - Is price still near structural balance? - Is price moving away from equilibrium in a controlled way? - Has the move become stretched? - Is price returning back into equilibrium after displacement? That makes it different from a standard Ichimoku presentation, where the raw components are visible but the user must do most of the structural interpretation manually. It is also different from other AG Pro scripts built around breakout quality, oscillator pressure, compression behavior, or reversion frameworks. This tool is specifically centered on equilibrium, extension, and reclaim behavior using an Ichimoku-derived structure model. Methodology The script uses the following structure: 1. Kijun-Sen Kijun-Sen is used as one of the main balance anchors. 2. Cloud midpoint The midpoint between Span A and Span B is used as a second structural reference. 3. Equilibrium core The script combines Kijun-Sen and the cloud midpoint into a dynamic equilibrium core. 4. Equilibrium band An adaptive band is built around the equilibrium core using ATR and cloud thickness. This allows the model to respond differently in quieter and more volatile conditions. 5. Stretch zones Beyond the equilibrium band, the script defines stretch areas that help distinguish normal directional expansion from more extended displacement. 6. Reclaim logic When price moves back into the equilibrium region after being outside it, the script can classify that transition as a reclaim state. This methodology is designed to make Ichimoku structure more explicit without removing the original context of the cloud framework. States / Signals & Alerts The script classifies chart behavior into the following states: Balanced Price is trading inside the equilibrium band. Bullish Expansion Price is trading above the equilibrium band with supportive directional structure. Bearish Expansion Price is trading below the equilibrium band with supportive directional structure. Overstretched Bullish Price is extended above the stretch threshold. Overstretched Bearish Price is extended below the stretch threshold. Bullish Reclaim Price has returned into the equilibrium region after trading below it. Bearish Reclaim Price has returned into the equilibrium region after trading above it. Available alert conditions: - Bullish Expansion - Bearish Expansion - Overstretched Bullish - Overstretched Bearish - Bullish Reclaim - Bearish Reclaim These states and alerts are descriptive tools for chart analysis. They are not a complete trade plan and should be interpreted in context. Key Inputs Ichimoku settings Users can adjust Tenkan length, Kijun length, Senkou Span B length, and displacement. Equilibrium engine settings Users can control ATR length, equilibrium band sensitivity, cloud-thickness contribution, stretch sensitivity, and chop lookback. Visual settings Users can control cloud visibility, Kijun visibility, equilibrium band visibility, stretch zones, state labels, label density, and panel appearance. These inputs allow the script to be tuned for different symbols, volatility conditions, and chart preferences. Limitations & Transparency This script is an indicator, not a strategy. It does not place trades, manage positions, calculate performance, or guarantee outcomes. The Equilibrium Score is an internal structure summary built from distance, alignment, cloud thickness, Tenkan/Kijun spread, reclaim contribution, and chop penalty. It is not a probability model, not a forecast, and not a standalone decision engine. Overstretched conditions do not automatically imply reversal. Reclaim conditions do not automatically imply continuation. Expansion conditions do not automatically imply strength will persist. As with any chart tool, interpretation depends on market regime, timeframe, volatility, and the user’s broader workflow. In noisy environments, state changes can occur more frequently. The script includes filters to reduce clutter, but no indicator removes uncertainty completely. Risk Disclosure This script is provided for research and chart analysis only. It is not financial advice. Users should evaluate any signal, state change, or alert within their own process, risk framework, and market context before making decisions.
Penunjuk Pine Script®
oleh AGProLabs
2
[KTY] Auto Support & Resistance Auto Support & Resistance Automatically detects and displays key support and resistance levels based on pivot highs and lows. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔑 Key Features ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ✅ Auto S/R Detection Scans recent price action using pivot analysis and plots up to 5 resistance and 5 support levels automatically. Resistance (Red): Price zones where selling pressure tends to increase Support (Green): Price zones where buying pressure tends to increase Levels are calculated from wick-based pivot highs and lows, capturing the most structurally significant price reactions. Price values are displayed to the right of each level for quick reference. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📖 How to Use ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1️⃣ Bounce near support → higher chance of upward move 2️⃣ Rejection near resistance → higher chance of downward move 3️⃣ Break and retest → check for S/R flip (role reversal) 🔄 S/R Flip - Broken support may act as new resistance - Broken resistance may act as new support - Watch for price reaction at previous levels after breakout ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔧 Settings ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Show Support & Resistance: Toggle visibility on/off Resistance Color: Customize resistance line color (default: red) Support Color: Customize support line color (default: teal) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alerts ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Resistance Touch: Triggers when price reaches the nearest resistance level Support Touch: Triggers when price reaches the nearest support level Touch detection uses a 0.1% tolerance zone to account for near-misses and wicks. Setup: ALT + A → Select 【Auto Support & Resistance】→ Create alert ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠️ Disclaimer ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ This indicator is an analysis tool, not a trade signal service. Based on historical pivot data — does not guarantee future price reactions. Strong trends may break through S/R levels easily. All trading decisions and associated risks are solely your responsibility.
Penunjuk Pine Script®
oleh Kim-Thank_You
2
Hash Auto Fibonacci## Overview Hash Auto Fibonacci eliminates the most time-consuming part of Fibonacci trading — drawing the levels yourself. Drop it on any chart and it automatically detects the most recent significant swing high and swing low, then instantly draws a complete Fibonacci retracement web anchored to those pivots. No manual drawing, no subjectivity, no missed setups. Built for active traders who use Fibonacci as a core part of their strategy, this tool is engineered to keep up with fast-moving markets through a volatility-adaptive detection engine, a highlighted Golden Pocket zone, a built-in stop-loss reference, and optional multi-timeframe confirmation. ## Key Features **Automatic Swing Detection** The indicator uses a pivot-based algorithm to identify swing highs and lows in real time. A pink dot marks the swing high and a green dot marks the swing low on the chart — always showing only the current active pair, never cluttering your screen with historical markers. **Dynamic Lookback Engine** Rather than using a fixed lookback period, Hash Auto Fibonacci automatically adjusts its sensitivity based on current market volatility. During high-volatility conditions (fast trending moves, breakouts), the lookback shortens to detect swings quickly. During low-volatility conditions (consolidation, ranging markets), it lengthens to filter out noise and identify only meaningful pivots. This is calculated using the ratio of a 50-period ATR to a 10-period ATR, scaled by a user-adjustable multiplier. You can also switch to a fixed manual lookback at any time. **Fibonacci Retracement Levels** The following retracement levels are drawn automatically: - 0 (swing high anchor) - 0.236 - 0.382 - 0.5 - 0.618 - 0.65 - 0.786 - 1.0 (swing low anchor) Optional extension levels (1.272, 1.618, 2.618) can be enabled for targets beyond the swing low. **The Golden Pocket Zone** The 0.618–0.65 confluence zone is highlighted as a gradient-filled amber band directly on the chart. This region — known as the Golden Pocket — is widely regarded as the highest-probability reversal zone within any Fibonacci retracement. The zone enforces an ATR-based minimum thickness so it remains visible even on assets with small absolute price ranges. **ATR Stop-Loss Reference** A dashed red line is automatically drawn below the swing low (bullish setup) or above the swing high (bearish setup) at a distance of 2× ATR-10. This gives a data-driven starting point for your stop-loss placement without requiring a separate indicator. **Multi-Timeframe Confirmation** When the current chart's swing pivot aligns within 0.5% of a confirmed pivot on a higher timeframe (default: 4H), the entire Fibonacci web is visually upgraded — lines become bolder, a confirmation badge appears, and an alert can be triggered. MTF-confirmed webs represent structurally significant levels that multiple timeframes agree on, which historically carry more weight as support and resistance. **Direction Detection** The indicator automatically determines whether the current setup is bullish (retracing upward from a low) or bearish (retracing downward from a high) by comparing which pivot — the high or the low — was confirmed most recently. You can override this manually if needed. **Info Dashboard** A clean navy dashboard in the corner of your chart displays: - Current swing high and swing low prices - 0.5 and 0.618 Fibonacci levels - Golden Pocket price range - Suggested ATR-based stop-loss price - Active lookback period (and whether it's dynamic or manual) --- ## How To Use **Basic setup** Add the indicator to any chart. It works on all timeframes and all assets — crypto, stocks, forex, futures. The Fibonacci web draws automatically. The Golden Pocket zone is the primary area to watch for price reactions. **Reading the chart** - Price pulling back into the Golden Pocket (0.618–0.65 zone) in a bullish setup is the classic high-probability long entry zone - Price rejecting from the Golden Pocket in a bearish setup is a potential short entry or profit-taking zone - The 0.5 level acts as the midpoint — a close above (bullish) or below (bearish) confirms continuation of the retracement - The 0.786 level is deep — a sweep past this level often signals the retracement is becoming a full reversal **Using the stop-loss line** The dashed red SL line is a reference, not a guaranteed stop placement. Use it as a starting point and adjust to your own risk tolerance. On volatile assets, consider placing your stop slightly beyond it to avoid wicks triggering your exit prematurely. **Multi-timeframe confirmation** When the ◆ MTF badge appears, the swing that anchors the current web also exists on the higher timeframe. These setups tend to produce cleaner reactions at Fibonacci levels because they represent areas where both short-term and institutional timeframe participants are watching the same price zone. **Alerts** Five alert conditions are available: - New swing high detected - New swing low detected - MTF confirmation active - Price entering the Golden Pocket - Price at the 0.382 level - Price at the 0.786 level Set these in the Alerts panel to get notified without watching the chart constantly. --- ## Settings Reference **Swing Detection** | Setting | Default | Description | |---|---|---| | Dynamic lookback | On | Automatically adjusts pivot sensitivity based on volatility | | Manual lookback | 10 | Fixed lookback used when dynamic mode is off | | Dynamic multiplier | 9 | Controls the average lookback length in dynamic mode | | Direction mode | Auto | Auto, Bullish, or Bearish override | | Show swing markers | On | Displays pivot dots on the chart | **Multi-Timeframe Confirmation** | Setting | Default | Description | |---|---|---| | MTF confirmation | On | Enables higher timeframe pivot alignment check | | HTF timeframe | 240 (4H) | The timeframe used for confirmation pivots | **Fibonacci Levels** | Setting | Default | Description | |---|---|---| | Retracement levels | On | Draws the standard 0–1 retracement web | | Extension levels | Off | Adds 1.272, 1.618, 2.618 extension targets | | Ratio labels | On | Shows ratio numbers next to each level | | Golden Pocket zone | On | Highlights the 0.618–0.65 zone | | ATR stop-loss line | On | Draws the 2× ATR stop reference | **Info Table** | Setting | Default | Description | |---|---|---| | Show info table | On | Displays the dashboard | | Position | Top Right | Corner placement of the dashboard | --- ## Notes - This indicator is an overlay — it draws directly on the price chart - Works on all timeframes, all markets, and all asset classes available on TradingView - The dynamic lookback is calibrated on BTC/USDT 1H data and performs well across most liquid crypto and equity instruments - Past Fibonacci levels do not guarantee future price reactions — use this tool as part of a broader trading system, not as a standalone signal - This indicator does not repaint. Swing pivots are confirmed before being drawn and are not subject to change after confirmation --- ## By Hash Capital Research
Penunjuk Pine Script®
oleh Hash_Capital
S/R Breakout Strategy LONG ONLY S/R Breakout Strategy is a long-only trend-following strategy that enters positions when price breaks above a confirmed resistance level. It features independent take-profit management per trade, a built-in cooldown mechanism, and a multi-timeframe SMA filter to ensure trades align with the broader market trend. This strategy is designed for traders who prefer systematic breakout entries with strict risk controls and the ability to manage multiple positions simultaneously. 🔧 Key Features 1. Support & Resistance Breakout Entry Identifies swing highs and swing lows using configurable left/right bar parameters. Enters a long position when price crosses above a confirmed resistance level. Validates that the channel width between support and resistance does not exceed a user-defined maximum percentage — ensuring entries occur only in reasonably tight ranges. 2. Independent Take Profit Per Trade Each trade has its own dynamically calculated take-profit level based on the entry price. Take profit is set as a percentage above entry, allowing consistent risk-to-reward structure across all positions. 3. Cooldown Mechanism Prevents consecutive entries immediately after a trade is opened. Configurable number of bars to wait before allowing a new entry — useful for avoiding overtrading in volatile conditions. 4. Multi-Timeframe SMA Filter Optionally uses an SMA (Simple Moving Average) on a higher or custom timeframe to filter entries. Ensures trades are taken only when price is above the SMA and beyond a minimum distance percentage — helping avoid trades against the dominant trend. 5. Position Management Limits the maximum number of concurrent open trades to control exposure. Allows pyramiding (multiple entries) with independent exits. 📈 How to Use 1. Add the strategy to your chart. 2. Configure the parameters according to your trading style and market conditions. 3. Enable or disable the SMA filter based on whether you want trend confirmation. 4. Backtest on your preferred symbols and timeframes to validate performance. Recommended use: This strategy works well on 3-4 minutes timeframe cooldown bars must be 50 or above
Strategi Pine Script®
oleh One_punchcoin
Periodic Anchored VWAPPeriodic Anchored VWAP Overview The Periodic Anchored VWAP is a professional volume-weighted average price indicator that anchors VWAP calculations to fixed calendar periods. Unlike traditional anchored VWAP tools that require manual point-and-click anchoring, this indicator automatically resets VWAP calculations at predefined interval boundaries (hourly, daily, weekly, monthly), providing a clean, systematic approach to volume-weighted support and resistance analysis. Key Features 13 Anchor Periods: 1H, 4H, 6H, 12H, 1D, 3D, 1W, 2W, 1M, 2M, 3M, 6M, 12M Smart Timeframe Filtering: Automatically hides VWAPs when chart timeframe equals or exceeds anchor period Individual Period Controls: Toggle each VWAP on/off independently with custom colors Master Toggle: Global show/hide for all VWAP lines Dynamic Labels: Real-time price labels at the right edge of chart Compact Settings: Streamlined input panel with inline color pickers How It Works The Golden Rule VWAP is displayed ONLY when: Chart Timeframe < Anchor Period This ensures VWAP lines always represent meaningful continuous calculations. For example: 1H VWAP appears only on timeframes smaller than 1 hour (e.g., 15min, 5min, 1min) 1D VWAP appears only on timeframes smaller than daily (e.g., 4H, 1H, 15min) 1W VWAP appears only on timeframes smaller than weekly (e.g., daily, 4H, 1H) Anchor Logic Each VWAP resets at its respective period boundary: Intraday Anchors (1H, 4H, 6H, 12H): Reset at the start of each hour/4-hour/6-hour/12-hour period Daily Anchors (1D, 3D): Reset at daily market open Weekly Anchors (1W, 2W): Reset at weekly market open Monthly Anchors (1M, 2M, 3M, 6M, 12M): Reset at month boundaries Input Settings Master Control: VWAP Display Show / Hide Global toggle for all VWAP lines Intraday Anchors (Default: Off): 1H => Teal => Short-term intraday reference 4H => Pink => Medium-term intraday reference 6H => Magenta => Half-day session reference 12H => Cyan => Full session reference Anchor VWAP Periods (Default: On): 1D => Yellow/Green => Daily support/resistance 3D => Purple => Multi-day trend reference 1W => Blue => Weekly pivot levels 2W => Light Blue => Bi-weekly trend 1M => Green => Monthly support/resistance 2M => Dark Green => 2-month horizon 3M => Yellow => Quarterly reference 6M => Orange => Semi-annual trend 12M => Red => Annual benchmark Visual Display VWAP Lines: Colored lines plotted at 2px thickness for clear visibility: Right-Edge Labels: Compact labels showing period and current VWAP value Smart Label Colors: Black or white text automatically based on line color for optimal readability Use Cases Intraday Trading: Use 1H, 4H, 6H, 12H VWAPs on lower timeframes (e.g., 5min, 15min) to identify intraday support/resistance levels Multiple intraday VWAPs reveal stacked liquidity zones Swing Trading: 1D, 3D, 1W, 2W VWAPs help identify trend direction and mean reversion levels Weekly VWAP provides context for daily price action Position Trading: 1M, 3M, 6M, 12M VWAPs offer long-term benchmarks for valuation assessment Multiple monthly VWAPs show multi-year price distribution Multi-Timeframe Analysis: Visualize up to 13 VWAP levels simultaneously Identify confluences where multiple VWAP periods align Observe how price interacts with different anchored levels Important Notes Timeframe Limitations: VWAPs automatically hide when the chart timeframe is equal to or greater than the anchor period (prevents misleading point-to-point lines) Intraday Anchors Disabled by Default: Enable only the periods relevant to your trading style to reduce visual clutter Monthly Anchors: Use 30-day approximation for minute calculations; display logic ensures they only appear on daily or lower timeframes Label Positioning: Labels appear 1-13 bars to the right of the current bar to prevent overlap with price action Performance Efficiently coded with looped label management No repainting — all calculations are historical Compatible with all markets and symbols Version History v.1.0 => Initial release with 13 anchor periods, timeframe validation, and dynamic labels Start using Periodic Anchored VWAP to elevate your volume-weighted analysis across all timeframes!
Penunjuk Pine Script®
oleh BacktestTerminal
AG Pro Price Acceptance Profile [AGPro Series]AG Pro Price Acceptance Profile OVERVIEW AG Pro Price Acceptance Profile is a price-structure tool designed to reveal where the market is spending time, where it is repeatedly returning, and where it is rejecting price efficiently. Instead of using volume distribution, signal arrows, or breakout-style triggers, this script builds an acceptance/rejection map from price-time interaction inside a rolling lookback window. The goal is simple: make it easier to identify where price is being accepted, where it is being rejected, and whether current price is trading inside balance or at its outer edges. This is not a volume profile clone, not a support/resistance line generator, and not a momentum signal script. It focuses on one specific question: Which price areas are currently showing repeated acceptance, and which areas are failing to hold price? That narrow focus is intentional. The script is built as an analytical context tool rather than an entry engine. UNIQUE EDGE The core idea is to measure acceptance through price-time behavior rather than centralized volume data. The profile logic evaluates how often price revisits a zone, how long it tends to remain there, and how efficiently it exits that zone. This creates a structured map of: - Acceptance zones - Rejection zones - The active balance area - The current market state relative to that balance Because the methodology is based on price persistence and revisit behavior, the script can be useful on markets where volume-based profiling is either unavailable, fragmented, or not the preferred analytical lens. METHODOLOGY The script divides the rolling price range into rows and evaluates each row using multiple internal dimensions derived from recent bars: 1) Time at price Measures how frequently the market occupies each row across the selected lookback. 2) Revisit density Tracks how often price returns to a row after leaving it. Repeated revisits can indicate ongoing acceptance or unfinished balancing behavior. 3) Dwell persistence Approximates whether the market tends to spend stable time in an area rather than only touching it briefly. 4) Rejection speed Measures how efficiently price exits an area after interaction. Faster and cleaner exits tend to support rejection classification. 5) Balance mapping Uses the strongest acceptance region to define the current balance area and then classifies the live market location relative to it. The result is a simplified profile-style framework built from price behavior itself. HOW TO READ IT The large balance area highlights the current acceptance region derived from the profile engine. Acceptance zones mark price areas that showed stronger persistence, repeated interaction, and better structural acceptance within the chosen lookback. Rejection zones mark areas where price interacted but failed to remain stable, leading to less durable occupation and faster displacement. The panel is designed to summarize the current profile state: - Acceptance Strength: relative quality of the dominant accepted area - Revisit Density: how actively the market is returning to profiled zones - Balance Width: width of the accepted region relative to the full profiled range - Rejection Speed: how efficiently price is leaving unstable areas - Location: whether current price is inside, above, or below balance In practice, traders can use the script to distinguish between stable trade location and unstable trade location, instead of treating every nearby level as equally important. KEY INPUTS Lookback Controls how much recent history is used to build the profile. Rows Defines profile resolution. Higher values increase granularity but can also make the map more sensitive. Acceptance Threshold / Rejection Threshold Adjust how selective the script is when classifying stronger acceptance and rejection areas. Maximum Acceptance / Rejection Zones Controls chart density and visual focus. Panel and label settings Allow adaptation for different chart layouts and screen sizes. LIMITATIONS AND TRANSPARENCY This script does not predict future price movement. It does not generate guaranteed reversal points. It does not replace execution logic or risk management. Acceptance and rejection are contextual measurements derived from the selected lookback and row resolution. Different settings can produce different maps because the profile is adaptive by design. As with any charting tool based on rolling historical context, zones may evolve when older bars leave the lookback window and new bars enter it. This script is best used as a contextual framework for market location, not as a standalone trade mandate. RISK DISCLOSURE This indicator is for analytical and educational use only. It does not provide financial advice, investment advice, or trading guarantees. All trading decisions remain the responsibility of the user.
Penunjuk Pine Script®
oleh AGProLabs
1
Supply & Demand Zones XLDescription Supply & Demand Zones XL is a non-repainting supply and demand indicator designed to model market structure with a focus on stability, clarity, and quantitative strength evaluation. The script identifies supply and demand zones using pivot-based structure and sizes each zone dynamically using ATR, ensuring consistent scaling across different market conditions. Zones are extended forward in real time and maintained as either active or historical depending on user preference. Each zone is scored using a composite strength model that incorporates volume participation, zone width efficiency, time in market, and touch frequency. The resulting strength rating is normalized to a simple X/10 format and displayed at the end of each zone for immediate readability. A non-repainting mode ensures that zones are only confirmed after pivot completion, preventing forward-looking bias. An optional volume filter allows users to require above-average participation before a zone is formed. The script includes logic to prevent redundant structure by disallowing overlapping zones of the same type while the current zone remains valid. Once a zone is broken, new zones are allowed to form, preserving structural continuity. Zones are considered broken only on confirmed closes beyond their boundaries, not intrabar wicks. Broken zones are downgraded in strength and can be visually differentiated using customizable color controls. Users can independently control coloring for active and historical broken zones, as well as define separate colors for supply, demand, broken supply, and broken demand. Historical zones can be toggled on or off, with optional strength labels, allowing users to balance context versus chart clarity. The result is a structured, state-driven supply and demand model that avoids noise, reduces duplication, and provides a consistent framework for evaluating zone quality and market behavior.
Penunjuk Pine Script®
oleh tgregg75
4
Doji Volume Map (Zeiierman)█ Overview Doji Volume Map (Zeiierman) is a volume reaction scanner that detects doji-like candles appearing with relatively high and rising volume, then converts those events into projected price levels. When a valid signal forms, the script places a bubble on the candle, extends a horizontal reaction level forward, and optionally merges nearby levels into a highlighted zone box. The result is a clean map of potential reaction areas built from high-interest doji events rather than generic swing highs or lows. ⚪ What It Detects The script searches for candles that combine 3 conditions at the same time: Relative high volume: Current volume must exceed the average volume by a user-defined multiplier. Rising volume: Current volume must be greater than the previous bar’s volume. Loose doji structure: The candle body must remain small relative to the total range, while the full range must still be meaningful enough relative to ATR. When those conditions align, the candle is treated as a significant reaction point and plotted as a bubble. From there, the script projects the price level forward and can combine overlapping levels into broader zones. █ How It Works For each bar inside the Lookback Length, the script checks whether the candle qualifies as a valid signal. It measures: Average volume over the selected Volume Average Length Relative volume strength using the Relative Volume Multiplier Whether volume is increasing vs the previous bar Whether the candle body is small enough to be considered doji-like Whether the total range is large enough relative to ATR █ How to Use When a doji-like candle forms with high and rising volume, it signals strong participation but no clear directional control. This means: Heavy trading occurred. Both sides were active. Price failed to move decisively. These areas often become key reaction zones, as the market tends to revisit and respond to where significant transactions took place. ⚪ In Trend In uptrends , signals on pullbacks can act as support/continuation zones In downtrends, signals on bounces can act as resistance/rejection zones Focus on using levels in the direction of the trend, where the dominant side is likely to defend. ⚪ In Ranges Signals near range lows → potential buy/support zones Signals near range highs → potential sell/resistance zones Merged zones are especially useful for identifying rotation areas within the range. ⚪ Key Idea High volume + indecision = high-interest price area These zones often lead to: Reactions Rejections Or continuation after confirmation Use retests and price behavior at these levels to guide entries. █ Settings Lookback Length — how many bars back the script scans for qualifying signals. Volume Average Length — baseline used to measure relative volume. Relative Volume Multiplier — minimum volume expansion required vs average. Max Body % of Range — defines how small the candle body must be to count as doji-like. Min Candle Range as ATR Fraction — filters out candles that are too small to matter. Key effect: Higher Relative Volume Multiplier = fewer but stronger signals Lower Max Body % of Range = stricter doji selection Higher Min Candle Range as ATR Fraction = fewer weak micro-signals Merge Close Levels Into Box — combines nearby projected levels into a single zone. Merge Distance (ATR) — controls how close levels must be to merge. ----------------- Disclaimer The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
Penunjuk Pine Script®
oleh Zeiierman
6