Mulakan

Priceaction

Swing Pivots - Market Structure High Low [zazenio]What is Market Structure? Market structure is simply the pattern of highs and lows that price creates as it moves. When you look at any chart, you'll notice price doesn't move in a straight line — it swings up, pulls back, swings up again (in an uptrend), or the opposite in a downtrend. These swing points — the peaks and valleys — are what traders call pivots. Identifying them correctly is the foundation of understanding where a market has been and where it might go next. What This Indicator Does Swing Pivots automatically marks these peaks and valleys on your chart so you don't have to draw them manually. It works on any market — stocks, crypto, forex, futures, indices — and on any timeframe. How Pivots Are Detected This indicator confirms pivots based on price structure, not a fixed bar count. Here's how it works: A swing high is confirmed when price breaks below the previous swing low. At that moment, we know the high was real — price tried to go higher, failed, and reversed. The market "proved" that level was a genuine turning point. A swing low is confirmed when price breaks above the previous swing high. The same logic applies — price tried to go lower, failed, and reversed direction. This creates a natural alternation: high, low, high, low. Each pivot is validated by the market's actual behavior, not by waiting for an arbitrary number of bars to pass. Why This Matters Most pivot indicators use a "lookback" method — they wait for a certain number of bars (say, 5 or 10) on each side of a candle before confirming it as a pivot. This creates a fixed delay. By the time the pivot appears on your chart, price has already moved on. This indicator doesn't wait. It confirms pivots the moment price structure proves them. The result is pivots that align with how traders actually read charts — based on breaks of structure, not arbitrary countdowns. Settings Swing Width: Controls how sensitive the detection is. Higher numbers show only major swings; lower numbers capture smaller moves within the structure. Style/Size/Colors: Customize how the pivot markers look on your chart. Use Cases See the "skeleton" of price action at a glance Identify potential support and resistance levels Understand if the market is trending or ranging Build a foundation for more advanced concepts like Break of Structure (BOS) and Change of Character (CHoCH) ⸻ Disclaimer: This script is provided for educational and informational purposes only. It is not financial advice and does not constitute a recommendation to buy or sell any financial instrument. Always do your own research and trade at your own risk.
Penunjuk Pine Script®
oleh zazenio
3
Fair Value Gap Signals [Kodexius]Fair Value Gap Signals is an advanced market structure tool that automatically detects and tracks Fair Value Gaps (FVGs), evaluates the quality of each gap, and highlights high value reaction zones with visual metrics and signal markers. The script is designed for traders who focus on liquidity concepts, order flow and mean reversion. It goes beyond basic FVG plotting by continuously monitoring how price interacts with each gap and by quantifying three key aspects of each zone: -Entry velocity inside the gap -Volume absorption during tests -Structural integrity and depth of penetration The result is a dynamic, information rich visualization of which gaps are being respected, which are being absorbed, and where potential reversals or continuations are most likely to occur. All visual elements are configurable, including the maximum number of visible gaps per direction, mitigation method (close or wick) and an ATR based filter to ignore insignificant gaps in low volatility environments. 🔹 Features 🔸 Automated Fair Value Gap Detection The script detects both bullish and bearish FVGs based on classic three candle logic: Bullish FVG: current low is strictly above the high from two bars ago Bearish FVG: current high is strictly below the low from two bars ago 🔸 ATR Based Gap Filter To avoid clutter and low quality signals, the script can ignore very small gaps using an ATR based filter. 🔸Per Gap State Machine and Lifecycle Each gap is tracked with an internal status: Fresh: gap has just formed and has not been tested Testing: price is currently trading inside the gap Tested: gap was tested and left, waiting for a potential new test Rejected: price entered the gap and then rejected away from it Filled: gap is considered fully mitigated and no longer active This state machine allows the script to distinguish between simple touches, multiple tests and meaningful reversals, and to trigger different alerts accordingly. 🔸 Visual Ranking of Gaps by Metrics For each active gap, three additional horizontal rank bars are drawn on top of the gap area: Rank 1 (Vel): maximum entry velocity inside the gap Rank 2 (Vol): relative test volume compared to average volume Rank 3 (Dpt): remaining safety of the gap based on maximum penetration depth These rank bars extend horizontally from the creation bar, and their length is a visual score between 0 and 1, scaled to the age of the gap. Longer bars represent stronger or more favorable conditions. 🔸Signals and Rejection Markers When a gap shows signs of rejection (price enters the gap and then closes away from it with sufficient activity), the script can print a signal label at the reaction point. These markers summarize the internal metrics of the gap using a tooltip: -Velocity percentage -Volume percentage -Safety score -Number of tests 🔸 Flexible Mitigation Logic (Close or Wick) You can choose how mitigation is defined via the Mitigation Method input: Close: the gap is considered filled only when the closing price crosses the gap boundary Wick: a full fill is detected as soon as any wick crosses the gap boundary 🔸 Alert Conditions -New FVG formed -Price entering a gap (testing) -Gap fully filled and invalidated -Rejection signal generated 🔹Calculations This section summarizes the main calculations used under the hood. Only the core logic is covered. 1. ATR Filter and Gap Size The script uses a configurable ATR length to filter out small gaps. First the ATR is computed: float atrVal = ta.atr(atrLength) Gap size for both directions is then measured: float gapSizeBull = low - high float gapSizeBear = low - high If useAtrFilter is enabled, gaps smaller than atrVal are ignored. This ties the minimum gap size to the current volatility regime. 2. Fair Value Gap Detection The basic FVG conditions use a three bar structure: bool fvgBull = low > high bool fvgBear = high < low For bullish gaps the script stores: -top as low of the current bar -bottom as high For bearish gaps: -top as high of the current bar -bottom as low This defines the price range that is considered the imbalance area. 3. Depth and Safety Score Depth measures how far price has penetrated into the gap since its creation. For each bar, the script computes a currentDepth and updates the maximum depth: float currentDepth = 0.0 if g.isBullish if l < g.top currentDepth := g.top - l else if h > g.bottom currentDepth := h - g.bottom if currentDepth > g.maxDepth g.maxDepth := currentDepth The safety score expresses how much of the gap remains intact: float depthRatio = g.maxDepth / gapSize float safetyScore = math.max(0.0, 1.0 - depthRatio) safetyScore near 1: gap is mostly untouched safetyScore near 0: gap is mostly or fully filled 4. Velocity Metric Velocity captures how aggressively price moves inside the gap. It is based on the body to range ratio of each bar that trades within the gap and rewards bars that move in the same direction as the gap: float barRange = h - l float bodyRatio = math.abs(close - open) / barRange float directionBonus = 0.0 if g.isBullish and close > open directionBonus := 0.2 else if not g.isBullish and close < open directionBonus := 0.2 float currentVelocity = math.min(bodyRatio + directionBonus, 1.0) The gap keeps track of the strongest observed value: if currentVelocity > g.maxVelocity g.maxVelocity := currentVelocity This maximum is later used as velScore when building the velocity rank bar. 5. Volume Accumulation and Volume Score While price is trading inside a gap, the script accumulates the traded volume: if isInside g.testVolume += volume It also keeps track of the number of tests and the volume at the start of the first test: if g.status == "Fresh" g.status := "Testing" g.testCount := 1 g.testStartVolume := volume An average volume is computed using a 20 period SMA: float volAvg = ta.sma(volume, 20) The expected volume is approximated as: float expectedVol = volAvg * math.max(1, (bar_index - g.index) / 2) The volume score is then: float volScore = math.min(g.testVolume / expectedVol, 1.0) This produces a normalized 0 to 1 metric that shows whether the gap has attracted more or less volume than expected over its lifetime. 6. Rank Bar Scaling All three scores are projected visually along the time axis as horizontal bars. The script uses the age of the gap in bars as the maximum width: float maxWidth = math.max(bar_index - g.index, 1) Then each metric is mapped to a bar length: int len1 = int(math.max(1, maxWidth * velScore)) g.rankBox1.set_right(g.index + len1) int len2 = int(math.max(1, maxWidth * volScore)) g.rankBox2.set_right(g.index + len2) int len3 = int(math.max(1, maxWidth * safetyScore)) g.rankBox3.set_right(g.index + len3) This creates an intuitive visual representation where stronger metrics produce longer rank bars, making it easy to quickly compare the relative quality of multiple FVGs on the chart.
Penunjuk Pine Script®
oleh UnknownUnicorn113699460
Smart Divergence Engine Overlay [ChartNation]SMART DIVERGENCE ENGINE OVERLAY — CANDLE-ANCHORED RSI DIVERGENCE VISUALIZATION ═══════════════════════════════════════════ TECHNICAL OVERVIEW ═══════════════════════════════════════════ Smart Divergence Engine Overlay renders pivot-confirmed RSI divergences directly on the price chart with candle-anchored lines and labels. This companion overlay shares the identical detection logic as the panel version but visualizes signals at their exact price levels rather than in oscillator space. The overlay implements repainting-proof divergence detection through pivot-locked RSI evaluation at historical bars (rsi ), ensuring all lines and labels remain stable as new bars form. Visual elements anchor to xloc.bar_index coordinates, maintaining precise positioning across zoom levels and timeframe changes. ═══════════════════════════════════════════ CORE ARCHITECTURE ═══════════════════════════════════════════ PIVOT-LOCKED DETECTION SYSTEM The overlay evaluates RSI at confirmed pivot bars, not at the current bar: Technical implementation: Price pivots detected via ta.pivotlow() / ta.pivothigh() with configurable Left/Right parameters RSI value captured at the pivot bar: rsi (historical bar offset) Divergence comparison performed between stored pivot values (lowRsiPrev vs lowRsiCurr) State management via var floats prevents recalculation across bars Result: Once a divergence line prints, it never moves or disappears. Historical stability is guaranteed because RSI evaluation occurs at a locked bar index (bar_index - pivotR), not at the moving present. Bullish divergence logic: if not na(lowPricePrev) and lowPriceCurr < lowPricePrev and lowRsiCurr > lowRsiPrev → Price made lower low, RSI made higher low → Divergence confirmed at lowIdxCurr (pivot bar index) Bearish divergence logic: if not na(highPricePrev) and highPriceCurr > highPricePrev and highRsiCurr < highRsiPrev → Price made higher high, RSI made lower high → Divergence confirmed at highIdxCurr (pivot bar index) RSI ENGINE The overlay uses the same RSI calculation as the panel version to ensure signal synchronization: Base calculation: ta.rsi(src, 14) — standard RSI momentum window Smoothing layer: ta.rma(rsiRaw, 2) — reduces high-frequency noise Volatility bands: 34-period SMA basis with 1.618 standard deviation multiplier Purpose: Bands define adaptive overbought/oversold context (not plotted on overlay) The volatility framework exists in the calculation layer to maintain logic parity with the panel version, ensuring divergences trigger at identical bars across both implementations. CANDLE-ANCHORED RENDERING All visual elements use xloc.bar_index positioning: Line rendering: line.new(x1=lowIdxPrev, y1=lowPricePrev, x2=lowIdxCurr, y2=lowPriceCurr, xloc=xloc.bar_index, color=bullCol, width=lineW) This anchors lines to specific bar indices and price levels, not to time coordinates. Result: Lines maintain exact positioning when zooming, panning, or switching timeframes. Label rendering: label.new(x=lowIdxCurr, y=lowPriceCurr, text="BUY", xloc=xloc.bar_index, style=label.style_label_up) Labels attach to the second pivot's bar index and price level, scaling naturally with chart transformations. ═══════════════════════════════════════════ VISUAL IMPLEMENTATION ═══════════════════════════════════════════ DIVERGENCE LINES Bullish divergence: Connects two price swing lows with upward-sloping line Color: Configurable (default lime green) Width: 1-6 pixels (configurable) Endpoint 1: Previous swing low (lowPricePrev at lowIdxPrev) Endpoint 2: Current swing low (lowPriceCurr at lowIdxCurr) Requirement: Current price lower than previous, current RSI higher than previous Bearish divergence: Connects two price swing highs with downward-sloping line Color: Configurable (default red) Width: 1-6 pixels (configurable) Endpoint 1: Previous swing high (highPricePrev at highIdxPrev) Endpoint 2: Current swing high (highPriceCurr at highIdxCurr) Requirement: Current price higher than previous, current RSI lower than previous Lines extend between pivot bars only (extend.none), never projecting into future. DIVERGENCE LABELS Optional BUY/SELL markers render at the second pivot: BUY label (bullish divergence): Position: Below current swing low (label.style_label_up) Text: "BUY" Color: Matches bullish line color Size: Normal (size.normal) SELL label (bearish divergence): Position: Above current swing high (label.style_label_down) Text: "SELL" Color: Matches bearish line color Size: Normal (size.normal) Labels can be toggled independently of lines via showLabels input. ═══════════════════════════════════════════ CONFIGURATION PARAMETERS ═══════════════════════════════════════════ RSI CALCULATION SETTINGS: Price Source: close (configurable to any price field) RSI Length: 14 (standard momentum window) Volatility Band Length: 34 (SMA period for RSI basis) Band Multiplier: 1.618 (standard deviation expansion) Note: Bands calculate internally but don't plot (logic parity with panel) DIVERGENCE DETECTION SETTINGS: Pivot Left: 10 bars (left-side swing confirmation) Pivot Right: 10 bars (right-side swing confirmation) Overbought Level: 68 (reference, does not affect logic) Oversold Level: 32 (reference, does not affect logic) Pivot parameters control strictness: Higher values = fewer, more significant divergences (requires wider swings) Lower values = more frequent divergences (detects smaller swings) VISUAL SETTINGS: Show Divergence Lines: true/false toggle Show BUY/SELL Labels: true/false toggle (independent of lines) Line Width: 1-6 pixels Bull Color: Configurable (default lime green) Bear Color: Configurable (default red) ═══════════════════════════════════════════ ALERT SYSTEM ═══════════════════════════════════════════ Two alert conditions trigger at identical timing as visual signals: "Bullish Divergence (Overlay)" Triggers when: Bullish divergence confirms at second pivot Timing: Fires AFTER Pivot Right bars complete (delayed but stable) Message: "TDI: Bullish divergence" Reliability: Never repaints (confirmation locked at rsi ) "Bearish Divergence (Overlay)" Triggers when: Bearish divergence confirms at second pivot Timing: Fires AFTER Pivot Right bars complete (delayed but stable) Message: "TDI: Bearish divergence" Reliability: Never repaints (confirmation locked at rsi ) Alert configuration: Set once on any chart/timeframe Fires only when divergence condition evaluates true Synchronized with visual rendering (alert = line + label appear) ═══════════════════════════════════════════ TRADING IMPLEMENTATION ═══════════════════════════════════════════ VISUAL ANALYSIS WORKFLOW The overlay provides direct price-level context for divergence signals: Bullish divergence interpretation: Identify two connected swing lows with upward-sloping line Lower price low indicates selling pressure weakening Higher RSI low indicates momentum refusing to confirm price weakness BUY label marks the second swing low (divergence confirmation point) Bearish divergence interpretation: Identify two connected swing highs with downward-sloping line Higher price high indicates buying pressure weakening Lower RSI high indicates momentum refusing to confirm price strength SELL label marks the second swing high (divergence confirmation point) CONFLUENCE WITH PRICE STRUCTURE Overlay enables direct correlation with chart elements: Support/Resistance alignment: Bullish divergence at major support level = higher probability reversal Bearish divergence at major resistance level = higher probability reversal Divergence in middle of range = lower conviction signal Volume confirmation: Divergence with decreasing volume = confirms momentum exhaustion Divergence with increasing volume = mixed signal, proceed with caution Multi-timeframe context: Higher timeframe trend alignment increases signal reliability Counter-trend divergences (against HTF trend) require additional confirmation ENTRY/EXIT FRAMEWORK The overlay marks divergence confirmation points, not entry triggers: Entry consideration process: Divergence line appears → structure-confirmed momentum divergence detected Wait for price confirmation (engulfing candle, break of structure, rejection wick) Validate with additional confluence (volume, support/resistance, HTF trend) Enter with predefined stop below/above divergence pivot Size position according to distance to invalidation level Exit planning: Initial target: Previous swing high (bullish) / swing low (bearish) Trail stop: Move to breakeven after initial profit target Invalidation: Close below divergence low (bullish) / above divergence high (bearish) ═══════════════════════════════════════════ PANEL VS OVERLAY USAGE ═══════════════════════════════════════════ IDENTICAL DETECTION LOGIC Both versions implement the same pivot-locked RSI evaluation: Same RSI calculation (14-length with 2-period RMA smoothing) Same volatility band framework (34-SMA + 1.618σ) Same pivot confirmation (10 Left + 10 Right) Same divergence comparison (rsi at locked bar indices) Result: Divergences trigger at identical bars across both implementations. RENDERING DIFFERENCES Panel version (overlay=false): Renders in separate pane below price chart Displays RSI line, volatility bands, 50-line midline Divergence lines drawn in oscillator space (RSI value coordinates) Optional Shark Fin exhaustion visualization Labels positioned relative to RSI levels Overlay version (overlay=true): Renders directly on price chart No RSI line or bands visible (calculate internally for logic only) Divergence lines drawn in price space (actual price coordinates) No Shark Fin visualization (price chart remains clean) Labels positioned at actual swing high/low prices COMPLEMENTARY WORKFLOW Recommended usage pattern: Panel version: Monitor RSI regime (above/below 50), band interactions, Shark Fin exhaustion Overlay version: Identify exact divergence price levels, correlate with support/resistance Combined analysis: Use panel for momentum context, overlay for entry/exit precision Alternative workflow (overlay only): If RSI analysis not required, overlay version provides clean divergence detection Pair with external RSI indicator if separate momentum visualization needed Focuses chart space on price action and divergence markers only ═══════════════════════════════════════════ TECHNICAL SPECIFICATIONS ═══════════════════════════════════════════ RESOURCE ALLOCATION: max_lines_count: 500 (divergence connector lines) max_labels_count: 500 (BUY/SELL markers) Suitable for most chart configurations and timeframes RENDERING STABILITY: xloc.bar_index positioning ensures visual stability across zoom/pan operations Historical divergences never move once printed Lines and labels scale proportionally with chart transformations TIMEFRAME COMPATIBILITY: Functions on any timeframe (1m to 1M) Pivot detection adapts to bar spacing automatically Lower timeframes generate more frequent signals (smaller swings) Higher timeframes generate fewer signals (larger swings) SYMBOL COMPATIBILITY: Works on all asset classes (stocks, forex, crypto, futures, indices) No symbol-specific logic or calculations Universal RSI-based divergence detection PERFORMANCE CHARACTERISTICS: Lightweight calculation overhead (RSI + pivot detection + state management) Visual rendering occurs only on divergence confirmation (not every bar) No continuous repainting or historical recalculation ═══════════════════════════════════════════ USE CASE SCENARIOS ═══════════════════════════════════════════ SCENARIO 1: Support/Resistance Divergence Setup: Price tests major support level twice, second test makes lower low Signal: Bullish divergence line appears, RSI makes higher low at support Interpretation: Momentum refusing to confirm price weakness at critical level Action: Consider long entry on next bullish candle above divergence low SCENARIO 2: Trend Exhaustion Setup: Strong uptrend, price makes new high but momentum slowing Signal: Bearish divergence line appears, RSI makes lower high Interpretation: Buying pressure weakening despite higher price high Action: Consider profit-taking on longs, watch for reversal confirmation SCENARIO 3: Range-Bound Reversal Setup: Price oscillating in horizontal range, tests lower boundary Signal: Bullish divergence at range support Interpretation: Oversold bounce opportunity within defined range Action: Long entry targeting range midpoint or upper boundary SCENARIO 4: Failed Breakout Setup: Price breaks resistance but momentum doesn't confirm Signal: Bearish divergence forms immediately after breakout Interpretation: Breakout lacks momentum conviction, likely false breakout Action: Consider fade setup (short) with stop above divergence high ═══════════════════════════════════════════ LIMITATIONS & CONSIDERATIONS ═══════════════════════════════════════════ SIGNAL TIMING: Divergences print AFTER Pivot Right bars complete. This delay is intentional: Ensures structure confirmation (full swing formation) Prevents real-time repaint issues Trades confirmation reliability for signal speed Users requiring instant signals should use real-time divergence detectors (with repaint risk). Users requiring reliable, stable signals should accept the confirmation delay. LINE CLUTTER: On lower timeframes with sensitive pivot settings: High signal frequency may create visual clutter Solution: Increase Pivot Left/Right values to filter smaller swings Alternative: Use panel version for primary analysis, overlay for key divergences only FALSE SIGNALS: Divergences indicate momentum divergence, not guaranteed reversals: Strong trends can maintain divergent conditions for extended periods Divergence in isolation is a warning sign, not a trade trigger Requires confluence with price action, volume, structure for high-probability setups VOLATILITY BAND CONTEXT: Bands calculate internally but don't visualize on overlay: Users lose visual context of RSI overbought/oversold zones Solution: Use panel version alongside overlay for complete RSI regime awareness Alternative: Add separate RSI indicator to chart for band visualization ═══════════════════════════════════════════ Smart Divergence Engine Overlay provides candle-anchored, repainting-proof RSI divergence visualization directly on price charts. Lines and labels render at exact pivot price levels using xloc.bar_index positioning, maintaining stability across all chart transformations. Divergence detection uses pivot-locked RSI evaluation (rsi ) to ensure historical signals never move or disappear. The overlay shares identical detection logic with the panel version but renders in price space rather than oscillator space, enabling direct correlation with support/resistance levels and price structure. All visual elements trigger only after full pivot confirmation (Pivot Left + Pivot Right bars), trading signal speed for absolute reliability.
Penunjuk Pine Script®
oleh chartnation
Green to Red Money RailsWhat this indicator does Green to Red Money Rails (G2R Rails) is a price-action tool that draws dynamic “rails” from recent swing lows and highs. It tracks how support and resistance are shifting so you can see where trend pressure is building or weakening. Core logic (high level) Detects pivot lows and stores the last three (L1, L2, L3). Builds green support “fans”: inner dotted rails L1→L2 and L2→L3, plus a main solid base rail L1→L3. Detects pivot highs and, when the last high is lower than the previous one, draws a red resistance rail from H2→H3. Optional labels mark the most recent swing low (“L”) and swing high (“H”). How to use it Use the green rails as dynamic support zones for trend-following, pullback entries, or stop placement. Use the red rail as a visual ceiling in downtrends: breaks above it can signal the end of a sell-off; rejections at it confirm sellers still in control. Works best on liquid markets and swing-trading timeframes (for example, 1h–1D). Always combine with your own risk management and higher-timeframe context. This script does not auto-generate signals or manage risk for you; it is a visual framework for reading structure and building your own trading plans.
Penunjuk Pine Script®
oleh FlyingOceanTiger
1
Price Action Strategy v2.0 [Ista]💎 Overview Price Action Strategy v2.0 is a comprehensive, all-in-one institutional trading toolkit designed for visual traders who demand precision. Unlike standard indicators, this tool focuses on the narrative of price by combining advanced Market Structure, Institutional Order Flow, and Predictive Analytics into a single, non-cluttered interface. The core philosophy of this script is "Clean Precision". It filters out noise and presents only the most critical decision-making data via smart chart overlays and a state-of-the-art Analytic Dashboard. 🚀 Key Features 1. 🏛️ Institutional Order Blocks (Origin Scan Engine) This is not a standard pivot-based OB indicator. We utilize a proprietary "Origin Scan" algorithm that: Detects the exact origin candle responsible for a structural break (BOS). Filters out weak blocks, keeping only the most significant institutional footprints. Smart Management: Limits active blocks to the 3 most recent per side (Support/Resistance) to keep charts clean. Ghost Mode: When an Order Block is broken, it doesn't just disappear; it turns into a faint "Ghost" level, allowing you to see historical reactions without visual clutter. 2. 🔮 Echo Forecast (Predictive Path) A powerful forecasting engine based on Pattern Similarity: Scans historical price action (Evaluation Window) to find patterns mathematically similar to the current market state. Projects the most likely future path (Forecast Window) directly onto the chart. Uses a cumulative calculation method to smooth out noise and provide a realistic trajectory. Visual Coding: The forecast line thickens and changes color based on the Confidence Score (Correlation %). High confidence patterns (>80%) are highlighted in deep green. 3. 📊 ISTA Command Center (Analytic Dashboard) A professional, compact, and right-aligned dashboard that acts as your trading HUD. It monitors 8 vital market vitals in real-time: Market Structure: Real-time Swing trend direction. HTF Trend: Higher Timeframe bias (Price Action based). Momentum: Current & HTF RSI status (Overbought/Oversold). MACD: Signal crossover status. Smart Money Flow (MFI): Detects institutional accumulation/distribution. Volatility (ATR%): Current market volatility percentage. Forecast Confidence: The statistical reliability of the current Echo Forecast. 4. 📉 Dynamic EMAs Includes three key moving averages (20, 200, 1440) with dynamic transparency logic. They fade into the background when not interacting with price, ensuring they are there when you need them but invisible when you don't. 🛠️ How to Use Identify Trend: Look at the Dashboard. If Structure and HTF Trend align (e.g., both Bullish), look for longs. Wait for Pullback: Wait for price to return to a Bullish Order Block. Confirm: Check the Forecast line. Does it suggest a bounce? Check MFI and RSI on the dashboard for oversold conditions. Execute: Use the Order Block edges for precise entry and invalidation points. ⚙️ Settings Swing Length: Adjust sensitivity of the structure (Default: 10). Evaluation Window: How far back the Echo Forecast looks for patterns (Default: 300). Dashboard: Fully customizable position and size. Developed by Soheil_kheiri | Ista Web Analytics
Penunjuk Pine Script®
oleh soheilkheiri
2
(QUANTLABS) Fractal God Mode: 25-Timeframe Scanner The indicator aggregates data into three distinct metric columns: 1. STRUCT (Market Structure) This analyzes price action relative to Fractal Pivots (Highs and Lows) to determine market direction. HH (Breakout): Price has closed above the previous Pivot High. (Bullish Structure) LL (Breakdown): Price has closed below the previous Pivot Low. (Bearish Structure) TRAPPED: Price is trading between the last Pivot High and Low. This indicates a ranging market where trend trades should be avoided. 2. VELOCITY (Thrust) This measures the specific strength of the current candle on that timeframe. The Math: It calculates the ratio of the body (Close - Open) relative to the total candle range (High - Low). The Signal: High positive numbers (Green) indicate buyers are closing near highs. High negative numbers (Red) indicate sellers are dominating the range. 3. QUALITY (Efficiency Ratio) This acts as a "Noise Filter." It determines if the trend is moving in a straight line or whipping back and forth. The Math: It divides the Net Price Movement (Distance from 5 bars ago) by the Total Path Traveled (Sum of the ranges of the last 5 bars). PRISTINE (Values > 0.6): The market is moving efficiently in one direction. CHOPPY (Values < 0.4): The market is volatile and non-directional (High Noise). 1. The Matrix (Dashboard) Located in the bottom right, this table gives you an instant read on Short-Term (3m-9m), Medium-Term (10m-45m), and Long-Term (1H-Daily) trends. 2. Coherence Flow At the bottom of the table, the script sums up the structural score of all 25 timeframes. COHERENT BULL: When the Short, Medium, and Long terms align green. COHERENT BEAR: When the Short, Medium, and Long terms align red. 3. God Mode (Global S/R) The indicator can plot Support and Resistance levels from higher timeframes onto your current chart. For example, while trading the 5m chart, you can see the 4H and Daily pivot levels plotted automatically as dotted lines, ensuring you never trade blindly into a higher-timeframe wall. Trend Following: Wait for the "Coherent Bull/Bear" signal at the bottom of the dashboard. This confirms that momentum is aligned from the 3m chart up to the Daily. Scalping: Focus on the Quality column. Only take trades when the Quality is "CLEAN" or "PRISTINE." Avoid entries when the dashboard warns of "High Noise" (Choppy). Risk Management: If the dashboard shows "TRAPPED" on the Long Term (1H+), reduce position size or wait for a breakout. Pivot Lookback: Adjusts the sensitivity of the Fractal Structure (Default: 5). Show Fractal DNA Matrix: Toggles the dashboard table. Show ALL Timeframe S/R: Enables "God Mode" to see supports/resistances from all 25 timeframes (Heavy visual processing, use carefully).
Penunjuk Pine Script®
oleh CustomQuantLabs
Hash Pivot DetectorHash Pivot Detector Professional Support & Resistance Detection with Multi-Timeframe Zone Analysis Developed by Hash Capital Research, the Hash Pivot Detector is a sophisticated indicator designed for identifying key support and resistance levels using pivot-based detection with institutional-grade zone analysis. Key Features Zone-Based Detection Unlike traditional single-line S/R indicators, Hash Pivot Detector uses configurable zones around pivot levels to represent realistic institutional order areas. Adjustable zone width accommodates different asset volatilities. Multi-Timeframe Analysis Displays higher timeframe support/resistance levels alongside current timeframe pivots, providing crucial context for institutional positioning and stronger price barriers. Clean Visual Design Features Hash Capital's signature fluorescent color scheme (pink resistance, cyan support) optimized for dark charts with high contrast and instant visual recognition. Semi-transparent zones keep your chart clean and readable. How It Works The indicator uses pivot high/low detection with configurable left and right bar parameters. When a pivot is confirmed, it plots: Primary support/resistance lines at pivot levels Semi-transparent zones representing realistic order areas Higher timeframe S/R levels as crosses for additional context Recommended Settings For Swing Trading: Pivot Bars: 10-20 left/right Zone Width: 0.5-1.0% HTF: Daily (on 1H-4H charts) For Intraday Trading: Pivot Bars: 5-10 left/right Zone Width: 0.3-0.5% HTF: 1H or 4H (on 5min-15min charts) Asset-Specific Zone Width: Forex/Crypto: 0.3-0.5% Stocks: 0.5-1.0% Volatile Assets: 1.0-2.0% What Makes It Different ✓ Zone-based approach (more realistic than lines) ✓ Multi-timeframe confluence detection ✓ Minimal visual clutter with maximum information ✓ Professional institutional aesthetic ✓ Comprehensive tooltips for easy optimization ✓ No repainting - all pivots are confirmed Best Used For Identifying high-probability entry/exit zones Setting stop-loss and take-profit levels Recognizing breakout/breakdown areas Multi-timeframe confluence analysis Swing trading and position trading Intraday scalping with adjusted parameters Notes Works on all timeframes and markets Fully customizable colors and parameters All settings include detailed optimization guidance Clean code, efficient performance No alerts or notifications (visual analysis only)
Penunjuk Pine Script®
oleh Hash_Capital
1
Flow Dynamics Pro [ChartNation]Flow Dynamics Pro - Institutional Order Flow Zones Detect high-probability institutional rejection zones with advanced volume analysis and confluence scoring. Flow Dynamics Pro identifies institutional order flow zones where smart money enters and defends positions. Unlike traditional order blocks or supply/demand indicators, this tool combines multiple confirmation factors into a single confluence score, helping you focus on the highest-quality setups. 🎯 KEY FEATURES Institutional Zone Detection Volume spike analysis (customizable threshold) Rejection wick detection (upper/lower wick ratios) Market structure validation (swing high/low alignment) Multi-factor confluence scoring (0-100 scale) Visual Volume Distribution Bull/bear volume split displayed inside each zone See the exact buying vs selling pressure at institutional levels Percentage breakdowns for quick analysis Toggle on/off based on preference Smart Zone Management Automatic zone invalidation when broken with volume Zone test tracking (shows how many times zones held) Visual strengthening (borders thicken after successful tests) Overlap prevention (maintains minimum spacing between zones) Maximum zone limit (keeps chart clean) Confluence Scoring System Zones are scored 0-100 based on: Volume Strength (30 points) - How significant was the volume spike Market Structure (25 points) - Alignment with swing points Zone Quality (25 points) - Wick ratio and pressure imbalance Size Quality (20 points) - Optimal zone size relative to ATR Zones are categorized as: ⚡ PREMIUM (80+) - Highest quality setups 🔥 STRONG (60-79) - Solid institutional zones ✓ MODERATE (40-59) - Valid but lower confluence Timeframe Adaptive Automatically adjusts detection sensitivity based on timeframe: On 1H and lower: Stricter requirements (reduces noise) On 4H and higher: Standard sensitivity (catches major zones) Works on all timeframes from 1-minute to Monthly Multi-Timeframe Context Display higher timeframe zones for broader market context Customizable HTF timeframe selection Dashed visualization to distinguish from current timeframe zones Comprehensive Alerts Premium zone created (score 80+) Price entering zone Price exiting zone Zone tested successfully Zone invalidated ⚙️ SETTINGS OVERVIEW Detection Settings Volume Spike Threshold (default: 1.2x) Minimum Wick Ratio (default: 0.3) Structure Validation toggle Detection Lookback period Invalidation Settings Require volume for invalidation (toggle) Invalidation volume threshold (default: 1.2x) Customizable to match your trading style Display Settings Maximum zones to display (default: 8) Show/hide labels Show/hide volume data Volume distribution toggle Label size adjustment (Small/Normal/Large) Minimum zone spacing % (prevents overlaps) Minimum confluence score filter (default: 55) Visual Customization Bullish zone color and opacity Bearish zone color and opacity Border colors Multi-timeframe zone colors 📊 HOW TO USE For Swing Traders (4H, Daily) Focus on PREMIUM zones (score 80+) Look for zones with multiple successful tests Enter on retests with confirmation Use HTF zones for broader context For Intraday Traders (1H, 15m) Use higher confluence minimum (60-65) Increase zone spacing to reduce clutter Focus on zones with clear volume distribution Combine with price action for entries Zone Test Interpretation Tested 0x: Fresh zone, untested Tested 1-2x: Gaining strength Tested 3+x: Highly defended level (thicker borders) Volume Distribution Guide 80%+ on one side: Strong directional bias 60-70% dominance: Moderate bias 50-50 split: Contested area, use caution 🔧 BEST PRACTICES Combine with trend: Trade zones in direction of higher timeframe trend Wait for confirmation: Don't enter blindly at zone touch Respect invalidation: When zones break with volume, they're done Use confluence scores: Prioritize scores 70+ for highest win rate Manage spacing: Adjust spacing % if chart feels cluttered Check timeframe: Lower timeframes may need stricter settings 🎓 UNDERSTANDING THE INDICATOR What are Institutional Zones? Areas where large players (institutions, market makers, smart money) have entered positions and actively defend them. These show up as: High volume rejection wicks Multiple tests that hold Clear buying/selling pressure imbalance Why Confluence Scoring? Not all zones are equal. The 0-100 scoring system helps you quickly identify which zones have the most confirmation factors aligned, saving time and improving trade selection. Why Zone Spacing Matters Too many overlapping zones create analysis paralysis. The spacing filter ensures you see only distinct, meaningful levels. 📈 TECHNICAL DETAILS Indicator Type: Overlay Max Boxes: 500 Max Labels: 500 Pine Script Version: 6 Real-time Updates: Yes Alerts: 5 types available Repainting: Zones finalize on bar close 🚀 GET STARTED Add indicator to chart Adjust confluence minimum (55-65 recommended) Set volume threshold for your instrument (1.2-1.5) Customize colors to match your theme Enable alerts for your preferred signals Trade with proper risk management 💡 TIPS Start with default settings and adjust based on results Higher timeframes = more reliable zones Premium zones (80+) have best risk/reward Tested zones (3+) show strong institutional defense Use zone invalidation as stop-loss reference Flow Dynamics Pro is part of the ChartNation indicator suite - delivering institutional-grade tools for serious traders.
Penunjuk Pine Script®
oleh chartnation
Volumetric Inverse Fair Value Gap (IFVG) [Kodexius]The Volumetric Inverse Fair Value Gap (IFVG) indicator detects and visualizes inverse fair value gaps (IFVGs) zones where previous inefficiencies in price (fair value gaps) are later invalidated or “inverted.” Unlike traditional FVG indicators, this tool integrates volume-based analysis to quantify the bullish, bearish, and overall strength of each inversion. It visually represents these metrics within a dynamically updating box on the chart, giving traders deeper insight into market reactions when liquidity imbalances are filled and reversed. Features Inverse fair value gap detection The script identifies bullish and bearish fair value gaps, stores them as pending zones, and turns them into inverse fair value gaps when price trades back through the gap in the opposite direction. Each valid inversion becomes an active IFVG zone on the chart. Sensitivity control with ATR filter and strict mode A minimum gap size based on ATR is used to filter out small and noisy gaps. Strict mode can be enabled so that any wick contact between the relevant candles prevents the gap from being accepted as a fair value gap. This lets you decide how clean and selective the zones should be. Show Last N Boxes control The indicator can keep only the most recent N IFVG zones visible. Older zones are removed from the chart once the number of active objects exceeds the user setting. This prevents clutter on higher timeframes or long histories and keeps attention on the most relevant recent zones. Ghost box for the original gap When the ghost option is enabled, the script draws a faint box that marks the original fair value gap from which the inverse zone came. This makes it easy to see where the initial imbalance appeared and how price later inverted that area. Volumetric bull, bear and strength metrics For each IFVG, the script estimates how much of the bar volume is associated with buying and how much with selling, then computes bull percentage, bear percentage and a strength score that uses a percentile rank of volume. These values are stored with the IFVG object and drive the visualization inside the zone. Three band visual layout inside each IFVG Each active IFVG is drawn as a container with three horizontal sections. The top band represents the bull percentage, the middle band the bear percentage and the bottom band the strength metric. The width of each bar reflects its respective value so you can read the structure of the zone at a glance. Customizable colors and label text Colors for bull, bear, strength, the empty background area, the ghost box and label text can be adjusted in the inputs. This allows you to match the indicator to different chart themes or highlight specific aspects such as strength or direction. Automatic invalidation and cleanup When price clearly closes beyond the IFVG in a way that breaks the logic of that zone, the script marks it as inactive and deletes all boxes and labels linked to it. Only valid and active IFVGs remain on the chart, which keeps the display clean and focused. Calculations 1. Detecting Fair Value Gaps (FVGs) A fair value gap is identified when price action leaves an imbalance between candle wicks. Depending on the mode: Bullish FVG: When low > high Bearish FVG: When high < low Optionally, the strict mode ensures wicks do not touch. The gap’s significance is filtered using the ATR multiplier input to exclude minor noise. Once detected, FVGs are stored as pending zones until inverted by opposite movement (price crossing through). bool bull_cond = strict_mode ? (low > high ) : (close > high ) bool bear_cond = strict_mode ? (high < low ) : (close < low ) float gap_size = 0.0 if bull_cond and close > open gap_size := low - high if bear_cond and close < open gap_size := low - high 2. Creating IFVGs (Inversions) When price later moves through a previous FVG in the opposite direction, an Inverse FVG (IFVG) is created. For example: A previous bearish FVG becomes bullish IFVG if price moves upward through it. A previous bullish FVG becomes bearish IFVG if price moves downward through it. The IFVG is initialized with structural boundaries (top, bottom) and timestamp metadata to anchor visualization. if not p.is_bull_gap and close > p.top inverted := true to_bull := true if p.is_bull_gap and close < p.btm inverted := true to_bull := false 3. Volume Metrics (Bull, Bear, Strength) Each IFVG calculates buy and sell volumes from the current bar’s price spread and total volume. Bull % = proportion of upward (buy) volume Bear % = proportion of downward (sell) volume Strength % = normalized percentile rank of total volume These are obtained through a custom function that estimates directional volume contribution: calc_metrics(float o, float h, float l, float c, float v) => float rng = h - l float buy_v = 0.0 if rng == 0 buy_v := v * 0.5 else if c >= o buy_v := v * ((math.abs(c - o) + (math.min(o, c) - l)) / rng) else buy_v := v * ((h - math.max(o, c)) / rng) float sell_v = v - buy_v float total = buy_v + sell_v float p_bull = total > 0 ? buy_v / total : 0 float p_bear = total > 0 ? sell_v / total : 0 float p_str = ta.percentrank(v, 100) / 100.0
Penunjuk Pine Script®
oleh UnknownUnicorn113699460
9
SMC Statistical Liquidity Walls [PhenLabs]📊 SMC Statistical Liquidity Walls Version: PineScript™ v6 📌 Description The SMC Statistical Liquidity Walls indicator is designed to visualize market volatility and potential reversal zones using advanced statistical modeling. Unlike traditional Bollinger Bands that use simple lines, this script utilizes an “Inverted Sigmoid” opacity function to create a “fog of war” effect. This visualizes the density of liquidity: the further price moves from the equilibrium (mean), the “harder” the liquidity wall becomes. This tool solves the problem of over-trading in low-probability areas. By automatically mapping “Premium” (Resistance) and “Discount” (Support) zones based on Standard Deviation (SD), traders can instantly see when price is overextended. The result is a clean, intuitive overlay that helps you identify high-probability mean reversion setups without cluttering your chart with manual drawings. 🚀 Points of Innovation Inverted Sigmoid Logic: A custom mathematical function maps Standard Deviation to opacity, creating a realistic “wall” density effect rather than linear gradients. Dynamic “Solidity”: The indicator is transparent at the center (Equilibrium) and becomes visually solid at the edges, mimicking physical resistance. Separated Directional Bias: distinct Red (Premium) and Green (Discount) coding helps SMC traders instantly recognize expensive vs. cheap pricing. Smart “Safe” Deviation: Includes fallback logic to handle calculation errors if deviation hits zero, ensuring the indicator never crashes during data gaps. 🔧 Core Components Basis Calculation: Uses a Simple Moving Average (SMA) to determine the market’s equilibrium point. Standard Deviation Zones: Calculates 1SD, 2SD, and 3SD levels to define the statistical extremes of price action. Sigmoid Alpha Calculation: Converts the SD distance into a transparency value (0-100) to drive the visual gradient. 🔥 Key Features Automated Premium/Discount Zones: Red zones indicate overbought (Premium) areas; Green zones indicate oversold (Discount) areas. Customizable Density: Users can adjust the “Steepness” and “Midpoint” of the sigmoid curve to control how fast the walls become solid. Integrated Alerts: Built-in alert conditions trigger when price hits the “Solid” wall (2SD or higher), perfect for automated trading or notifications. Visual Clarity: The center of the chart remains clear (high transparency) to keep focus on price action where it matters most. 🎨 Visualization Equilibrium Line: A gray line representing the mean price. Gradient Fills: The space between bands fills with color that increases in opacity as it moves outward. Premium Wall: Upper zones fade from transparent red to solid red. Discount Wall: Lower zones fade from transparent green to solid green. 📖 Usage Guidelines Range Period: Default 20. Controls the lookback period for the SMA and Standard Deviation calculation. Source: Default Close. The price data used for calculations. Center Transparency: Default 100 (Clear). Controls how transparent the middle of the chart is. Edge Transparency: Default 45 (Solid). Controls the opacity of the outermost liquidity wall. Wall Steepness: Default 2.5. Adjusts how aggressively the gradient transitions from clear to solid. Wall Start Point: Default 1.5 SD. The deviation level where the gradient shift begins to accelerate. ✅ Best Use Cases Mean Reversion Trading: Enter trades when price hits the solid 2SD or 3SD wall and shows rejection wicks. Take Profit Targets: Use the Equilibrium (Gray Line) as a logical first target for reversal trades. Trend Filtering: Do not initiate new long positions when price is deep inside the Red (Premium) wall. ⚠️ Limitations Lagging Nature: As a statistical tool based on Moving Averages, the walls react to past price data and may lag during sudden volatility spikes. Trending Markets: In strong parabolic trends, price can “ride” the bands for extended periods; mean reversion should be used with caution in these conditions. 💡 What Makes This Unique Physics-Based Visualization: We treat liquidity as a physical barrier that gets denser the deeper you push, rather than just a static line on a chart. 🔬 How It Works Step 1: The script calculates the mean (SMA) and the Standard Deviation (SD) of the source price. Step 2: It defines three zones above and below the mean (1SD, 2SD, 3SD). Step 3: The custom `get_inverted_sigmoid` function calculates an Alpha (transparency) value based on the SD distance. Step 4: Plot fills are colored dynamically, creating a seamless gradient that hardens at the extremes to visualize the “Liquidity Wall.” 💡 Note For best results, combine this indicator with Price Action confirmation (such as pin bars or engulfing candles) when price touches the solid walls.
Penunjuk Pine Script®
oleh PhenLabs
ZynIQ Order Block Master Pro v2 - (Pro Plus Pack)Overview ZynIQ Order Block Master Pro v2 identifies areas where price showed strong displacement and left behind significant zones of interest. It highlights potential reaction areas, continuation blocks and mitigation zones based on structural behaviour and directional flow. Key Features • Automatic detection of bullish and bearish order block zones • Optional refinement filters for higher-quality zones • Displacement-aware logic to reduce weak signals • Optional mitigation markers when price revisits a zone • Configurable sensitivity for different markets and timeframes • Clean labels and minimal chart clutter • Complements structure, liquidity and FVG tools Use Cases • Highlighting key reaction areas based on previous strong moves • Tracking potential continuation or reversal zones • Combining order blocks with BOS/CHOCH and liquidity mapping • Building confluence with breakout or volume tools Notes This tool provides contextual price zones based on displacement and structural movement. It is not a standalone trading system. Use with your own confirmation and risk management.
Penunjuk Pine Script®
oleh ZynIQ
ZynIQ FVG Master Pro v2 - (Pro Pack)Overview ZynIQ FVG Master v2 (Pro) identifies fair value gaps and highlights key imbalance zones within price action. It includes detection for standard and extended FVGs, optional mitigation logic and context filters to help traders understand where inefficiencies may be filled. Key Features • Detection of regular and extended FVGs • Optional mitigation and fill markers • Configurable minimum gap size and sensitivity • Direction-aware colour coding • Optional smart filtering to reduce low-quality gaps • Clean visuals designed for intraday and swing analysis • Can be used alongside structure and liquidity tools for confluence Use Cases • Identifying imbalance zones likely to be revisited • Spotting high-probability mitigation areas • Combining FVGs with BOS/CHOCH or liquidity sweeps • Mapping context for continuation and reversal setups Notes This tool provides FVG and imbalance context. It is not a standalone trading system. Use with your preferred confirmation and risk management.
Penunjuk Pine Script®
oleh ZynIQ
ZynIQ Liquidity Master Pro v2 - (Pro Pack)Overview ZynIQ Liquidity Master v2 (Pro) identifies key liquidity pools and sweep zones using automated swing logic, equal-high/low detection and multi-level liquidity mapping. It provides a clear view of where liquidity may be resting above or below price, helping traders understand potential sweep or mitigation behaviour. Key Features • Automatic detection of EQH/EQL (equal highs/lows) • Mapping of major swing liquidity zones • Optional PDH/PDL (previous day high/low) and weekly levels • Detection of potential liquidity sweep areas • Clean labels for swing points and liquidity clusters • Configurable sensitivity for different markets or timeframes • Lightweight visuals with minimal clutter Use Cases • Identifying major liquidity pools above or below price • Spotting potential sweep conditions before reversals • Anchoring market structure or FVG tools with liquidity context • Understanding where price may target during expansion moves Notes This tool identifies areas of resting liquidity based on swing and equal-high/low logic. It is not a standalone trading system. Use with your preferred confirmation and risk management.
Penunjuk Pine Script®
oleh ZynIQ
ZynIQ Market Structure Master v2 - (Pro Pack)Overview ZynIQ Market Structure Master v2 (Pro) maps structural shifts in price action using automated BOS/CHOCH detection, swing analysis and directional flow. It provides a clear view of when the market transitions between expansion, pullback and reversal phases. Key Features • Automated BOS (Break of Structure) and CHOCH detection • Swing high/low mapping with optional filtering • Directional flow logic for identifying trend vs reversal phases • Optional EQ levels and mitigation markers • Configurable structure sensitivity for different timeframes • Clean labels and minimal clutter for fast interpretation • Suitable for intraday and swing structure analysis Use Cases • Identifying key structural shifts in trend • Spotting early reversal signals via CHOCH • Assessing trend continuation vs distribution/accumulation • Combining structure with liquidity, FVG or breakout tools Notes This tool provides structural context using break-of-structure and swing logic. It is not a trading system by itself. Use alongside your own confirmation and risk management.
Penunjuk Pine Script®
oleh ZynIQ
ZynIQ Premium/Discount Master v2 - (Lite Pack)Overview ZynIQ Premium-Discount Master v2 (Lite) is a simplified tool designed to highlight premium/discount zones relative to short-term market structure. It helps traders see when price is stretched above or below fair value, using volatility-adjusted logic suitable for intraday and swing trading. Key Features • Automated premium/discount classification • Volatility-aware thresholds for mild and strong stretch conditions • Clear visual cues for overbought/oversold environments • Direction-aware structure to complement trend and momentum tools • Clean labels marking stretch transitions • Lightweight visuals suitable for fast charting workflows Use Cases • Identifying premium and discount zones for entries or exits • Assessing when price has deviated significantly from equilibrium • Combining with breakout or VWAP tools for structured confluence • Improving trade timing with stretch-based context Notes This tool provides premium/discount structure and stretch context. It is not a standalone trading system. Use it along with your own confirmation and risk management rules.
Penunjuk Pine Script®
oleh ZynIQ
Gold Fair Value [Alpha Extract]Gold-anchored Bitcoin fair value model is a macro-fundamental valuation indicator that anchors Bitcoin price assessment to gold market dynamics, establishing fair value zones through percentage change influence modelling and adaptive band multipliers. This overlay system provides institutional-grade context for identifying accumulation zones, distribution zones, and fair value equilibrium across all market cycles with minimal chart clutter through sophisticated gradient fill visualization. 🔶 Gold-Anchored Valuation Framework Establishes Bitcoin's theoretical fair value by integrating daily gold price movements into a smoothed asset baseline, applying percentage change calculations over configurable periods to measure gold's momentum influence. The system translates gold's relative strength or weakness into Bitcoin price expectations through adjustable influence multipliers, creating a dynamic fair value line that adapts to shifting macro-fundamental relationships between digital and traditional store-of-value assets. 🔶 Multi-Layer Statistical Band System Implements asymmetric upper and lower band multipliers applied to the fair value baseline, creating five distinct valuation zones: extreme overvaluation, moderate overvaluation, fair value equilibrium, moderate undervaluation, and extreme undervaluation. The asymmetric configuration (default 1.46x upper, 0.74x lower) reflects Bitcoin's historical tendency toward asymmetric volatility patterns with more violent upside moves and grinding downside action, optimizing zone accuracy for actionable trading decisions. 🔶 Gradient Fill Visualization Employs sophisticated transparency-based gradient fills between bands to create visually intuitive valuation heat maps, with darker orange shading indicating proximity to fair value and lighter shading showing extreme deviation zones. The system maintains chart readability by hiding individual band lines while preserving the filled zones, eliminating visual clutter while delivering maximum information density for rapid market assessment without overwhelming the trader with excessive line plots. 🔶 Historical Context & Position Management The lower band zones have historically preceded periods of constructive price behavior including consolidation phases and early-stage recovery rallies, while upper band interactions have preceded distribution and correction events. This historical pattern recognition enables traders to position proactively based on valuation extremes rather than reactively chasing momentum, supporting systematic accumulation during undervaluation periods and graduated profit-taking during overvaluation extremes. All analysis provided by Alpha Extract is for educational and informational purposes only. The information and publications are not meant to be, and do not constitute, financial, investment, trading, or other types of advice or recommendations.
Penunjuk Pine Script®
oleh AlphaExtract
Viprasol Elite Flow Pro - Premium Order Flow & Trend System═══════════════════════════════════════════════════════════════ 🔥 VIPRASOL ELITE FLOW PRO Professional Order Flow & Trend Detection System ═══════════════════════════════════════════════════════════════ 📊 WHAT IS THIS INDICATOR? Viprasol Elite Flow Pro is a comprehensive trading system that combines institutional order flow analysis with adaptive trend detection. Unlike basic indicators, this tool identifies high-probability setups by analyzing where smart money is likely positioning, while filtering signals through multiple confirmation layers. This indicator is designed for traders who want to: ✓ Identify premium (supply) and discount (demand) zones automatically ✓ Detect trend direction with adaptive cloud technology ✓ Spot high-volume rejection points before major moves ✓ Filter low-quality signals with intelligent confirmation logic ✓ Track market strength in real-time via elite dashboard ═══════════════════════════════════════════════════════════════ 🎯 CORE FEATURES ═══════════════════════════════════════════════════════════════ 1️⃣ ELITE TREND ENGINE • Adaptive Moving Average system (Fast/Adaptive/Smooth modes) • Dynamic trend cloud that expands/contracts with volatility • Real-time trend state tracking (Bullish/Bearish/Ranging) • Trend strength meter (0-10 scale) • ATR-based volatility adjustments 2️⃣ ORDER FLOW DETECTION • Automatic Premium Zone (Supply) identification • Automatic Discount Zone (Demand) identification • Smart zone extension - zones remain valid until broken • Zone rejection detection with price action confirmation • Customizable zone strength (5-30 bars lookback) 3️⃣ VOLUME INTELLIGENCE • Volume spike detection (configurable threshold) • Climax bar identification (exhaustion signals) • Volume filter for signal validation • Institutional activity detection 4️⃣ SMART SIGNAL SYSTEM • 3 Signal Modes: Aggressive, Balanced, Conservative • Multi-layer confirmation logic • Automatic profit targets (2:1 risk-reward) • Stop loss suggestions based on ATR • Prevents overtrading with bars-since-signal filter 5️⃣ ELITE DASHBOARD (HUD) • Real-time trend direction and strength • Volume status monitoring • Active zones counter • Market volatility gauge • Current signal status • 4 positioning options, compact mode available 6️⃣ PREMIUM STYLING • 4 Professional color themes (Cyber/Gold/Ocean/Fire) • Adjustable transparency and label sizes • Clean, institutional-grade visuals • Optimized for all chart types ═══════════════════════════════════════════════════════════════ 📖 HOW TO USE THIS INDICATOR ═══════════════════════════════════════════════════════════════ STEP 1: TREND IDENTIFICATION → Green Cloud = Bullish trend - look for LONG opportunities → Red Cloud = Bearish trend - look for SHORT opportunities → Purple Cloud = Ranging - wait for breakout or fade extremes STEP 2: ZONE ANALYSIS → PREMIUM (Red) zones = Potential resistance/supply areas → DISCOUNT (Green) zones = Potential support/demand areas → Price rejecting from zones = high-probability setups STEP 3: SIGNAL CONFIRMATION → Wait for "LONG" or "SHORT" labels to appear → Check dashboard for trend strength (Moderate/Strong preferred) → Confirm volume status is "HIGH" or "CLIMAX" → Entry: Enter when label appears → Stop Loss: Use dotted line (1 ATR away) → Take Profit: Use dashed line (2 ATR away) STEP 4: RISK MANAGEMENT → Never risk more than 1-2% per trade → Use the provided stop loss levels → Trail stops as price moves in your favor → Avoid trading during low volatility periods ═══════════════════════════════════════════════════════════════ ⚙️ RECOMMENDED SETTINGS ═══════════════════════════════════════════════════════════════ FOR SCALPING (1M - 5M): - Trend Type: Fast - Sensitivity: 15 - Signal Mode: Aggressive - Zone Strength: 8 FOR DAY TRADING (15M - 1H): - Trend Type: Adaptive - Sensitivity: 21 (default) - Signal Mode: Balanced - Zone Strength: 12 (default) FOR SWING TRADING (4H - Daily): - Trend Type: Smooth - Sensitivity: 34 - Signal Mode: Conservative - Zone Strength: 20 BEST MARKETS: ✓ Crypto (BTC, ETH, major altcoins) ✓ Forex (Major pairs: EUR/USD, GBP/USD) ✓ Indices (S&P 500, NASDAQ, DAX) ✓ High-liquidity stocks ═══════════════════════════════════════════════════════════════ 🎓 UNDERSTANDING THE METHODOLOGY ═══════════════════════════════════════════════════════════════ This indicator is built on three core concepts: 1. ORDER FLOW THEORY Markets move between premium (expensive) and discount (cheap) zones. Smart money accumulates in discount zones and distributes in premium zones. This indicator identifies these zones automatically. 2. ADAPTIVE TREND FOLLOWING Unlike fixed-period moving averages, the Elite Trend Engine adjusts to current market volatility, providing more accurate trend signals in both trending and ranging conditions. 3. CONFLUENCE-BASED ENTRIES Signals only trigger when multiple conditions align: - Price in correct zone (premium for shorts, discount for longs) - Trend confirmation (cloud color matches direction) - Volume validation (spike or climax present) - Price action strength (strong rejection candles) This multi-layer approach dramatically reduces false signals. ═══════════════════════════════════════════════════════════════ 🔔 ALERT SETUP ═══════════════════════════════════════════════════════════════ This indicator includes 5 alert types: 1. Long Signal → Triggers when buy conditions met 2. Short Signal → Triggers when sell conditions met 3. Volume Climax → Warns of pot
Penunjuk Pine Script®
oleh viprasol
5
Engulfing Detector by RWBTradeLabEngulfing Detector by RWBTradeLab A clean, non-repainting engulfing pattern detector designed for traders who rely on price action and candle confirmation. What this indicator does This script automatically identifies and highlights two types of engulfing patterns on closed candles only: 1. Regular Engulfing (R EG) * Regular Buy EG: A bullish candle fully engulfs the previous bearish candle’s high. * Regular Sell EG: A bearish candle fully engulfs the previous bullish candle’s low. 2. E-Regular Engulfing (ER EG) * Detects “extended” engulfing setups where a strong base candle is followed by 2 or more opposite-color candles and then a confirming engulf close. * Useful for spotting delayed but powerful reversals. Visuals on chart * A rectangle (box) is drawn from the base candle to the confirmation candle. * Optional text labels appear above/below the box (offset adjustable). * Separate color controls for: - Regular Buy / Regular Sell - E-Regular Buy / E-Regular Sell Alerts Built-in alerts trigger only at candle close: * R Buy EG * R Sell EG * ER Buy EG * ER Sell EG Each alert includes price and time in the message. Key settings * Candle Length: Scans last N closed candles (running candle excluded). * On/Off toggles: Enable/disable each engulfing type and labels individually. * Text Offset (%): Controls label distance from the box. Non-repainting confirmation All signals and alerts are calculated using confirmed bars only. No running-bar signals → no repainting. Best use Works on any market and timeframe. For higher reliability, combine with: * Key S/R zones * Trend direction * Volume or structure confirmation Disclaimer: This indicator is a pattern-detection tool, not financial advice. Trading involves risk; always use proper risk management and confirm signals with your own analysis. Creator: RWBTradeLab If you find this useful, please leave a like ⭐ and share your feedback.
Penunjuk Pine Script®
oleh RWBTradeLab
2
QuantMotions - FVG with Volume TrackingFair Value Gap Detector with Dynamic Shrinking & Volume Analysis Overview Advanced Fair Value Gap (FVG) detection indicator with real-time box shrinking and volume delta analysis. Automatically identifies price inefficiencies and tracks institutional volume flow within each gap. What are Fair Value Gaps? Fair Value Gaps occur when price moves so rapidly that a "gap" is left between three consecutive candles, creating an inefficiency where no trading occurred. These gaps often act as support/resistance zones that price tends to revisit. Detection: - Bullish FVG: When low > high (upward price inefficiency) - Bearish FVG: When high < low (downward price inefficiency) Key Features Dynamic Box Shrinking FVG boxes automatically shrink as price enters them: - Bullish FVGs shrink from top as price moves down into the gap - Bearish FVGs shrink from bottom as price moves up into the gap - Provides precise visualization of remaining unfilled gap area Volume Delta Analysis Tracks volume characteristics for the 3-candle FVG formation: - Total Volume: Sum of volume from all three FVG candles - Up/Down Split: Separates buying vs selling pressure - Delta %: Shows directional bias of volume flow - Color Coding: Green/Red when volume confirms direction, Orange when it doesn't Smart Filtering - ATR-based minimum gap size - Filters out insignificant noise gaps - Auto-cleanup - Removes fully filled FVGs automatically - Maximum display limit - Keeps charts clean by limiting visible FVGs Live Statistics Real-time stats table showing: - Active bullish/bearish FVG count - Average volume delta for each direction - Fill progress tracking Settings Min Gap Size (ATR): Minimum gap size as multiple of ATR(14). Default: 0.3 - Lower values (0.1-0.3): More sensitive, shows smaller gaps - Higher values (0.5-1.0): More selective, only significant gaps Max FVGs: Maximum number of FVG boxes to display (5-100) Remove Fully Filled: Automatically remove FVGs when price completely fills them Shrink on Partial Fill: Enable dynamic box shrinking as price enters gaps Show Volume Info: Display volume delta labels at box edges How to Use 1. Confluence Trading: Look for FVGs that align with your support/resistance levels 2. Volume Confirmation: Check volume delta - strong directional volume increases probability 3. Partial Fills: Watch for price reactions at shrinking FVG boundaries 4. Multiple Timeframes: Use on higher timeframes (4H+) for swing trading, lower timeframes for scalping Best Practices - Combine with trend analysis - FVGs in trend direction have higher fill rates - Pay attention to volume delta - gaps with confirming volume are more reliable - Use on liquid markets for accurate volume data - Higher timeframe FVGs typically carry more significance Notes - Works on all timeframes and instruments - Volume data accuracy depends on your data provider - FVGs are not guaranteed support/resistance - use proper risk management - This indicator shows historical inefficiencies, not future predictions Disclaimer: This indicator is for educational purposes only. Past performance does not guarantee future results. Always use proper risk management.
Penunjuk Pine Script®
oleh Trading-Programmer
The 'Qualified' POI Scorer [PhenLabs]📊 The “Qualified” POI Scorer (Q-POI) Version: PineScript™ v6 📌 Description The “Qualified” POI Scorer helps intermediate traders overcome "analysis paralysis" by filtering Smart Money Concepts (SMC) structures based on their probability. Instead of flooding your chart with every possible Order Block, this script assigns a proprietary “Quality Score” (0-100) to each zone. It analyzes the strength of the displacement, the presence of imbalances (FVG), and liquidity mechanics to determine which zones are worth your attention. It is designed to clean up your charts and enforce discipline by visually fading out low-quality setups. 🚀 Points of Innovation Dynamic “Glass UI” Transparency that automatically fades weak zones based on their score. Proprietary Scoring Algorithm (0-100) based on three distinct institutional factors. Visual Icon System that prints analytical context (💧— 🚀/🐌—🧱) directly on the chart. Automated Mitigation Tracking that changes the visual state of zones after they are tested. Displacement Velocity calculation using ATR to verify institutional intent. 🔧 Core Components Liquidity Sweep Engine: Detects if a pivot point grabbed liquidity from the previous X bars before reversing. FVG Validator: Checks if the move away from the zone created a valid Fair Value Gap. Momentum Scorer: Calculates the size of the displacement candle relative to the Average True Range (ATR). 🔥 Key Features Quality Filtering: Automatically hides or dims zones that score below 50 (user configurable). State Management: Zones turn grey when mitigated and delete themselves when invalidated. Visual Scorecard: Displays the exact numeric score on the zone for quick decision-making. Time-Decay Logic: Keeps the chart clean by managing the lifespan of old zones. 🎨 Visualization High Score Zones (80-100): Display as bright, semi-solid boxes indicating high probability. Medium Score Zones (50-79): Display as translucent “glass” boxes. Low Score Zones (<50): Display as faint “ghost” boxes or are completely hidden. Rocket Icon (🚀): Indicates high momentum displacement. Snail Icon (🐌): Indicates low momentum displacement. Drop Icon (💧): Indicates the zone swept liquidity. Brick Icon (🧱): Indicates the zone is supported by an FVG. 📖 Usage Guidelines Swing Structure Length (Default: 5): Controls the sensitivity of the pivot detection; lower numbers create more zones, higher numbers find major swing points. ATR Length (Default: 14): Determines the lookback period for calculating relative momentum. Minimum Quality Score (Default: 50): The threshold for which zones are considered “valid” enough to be fully visible. Bullish/Bearish Colors: Fully customizable colors that adapt their own transparency based on the score. Show Weak Zones (Default: False): Toggles the visibility of zones that failed the quality check. ✅ Best Use Cases Filtering noise during high-volatility sessions by focusing only on Score 80+ zones. Confirming trend continuation entries by looking for the Rocket (🚀) momentum icon. Avoiding “stale” zones by ignoring any box that has turned grey (Mitigated). ⚠️ Limitations The indicator is reactive to closed candles and cannot predict news-driven spikes. Scoring is based on technical structure and does not account for fundamental drivers. In extremely choppy markets, the ATR filter may produce lower scores due to lack of displacement. 💡 What Makes This Unique It transforms subjective SMC analysis into an objective, quantifiable score. The visual hierarchy allows traders to assess chart quality in milliseconds without reading data. It integrates three separate SMC concepts (Liquidity, Imbalance, Structure) into a single tool. 🔬 How It Works Step 1: The script identifies a Swing High or Low based on your length input. Step 2: It looks backward to see if that swing swept liquidity, and looks forward to check for an FVG and displacement. Step 3: It calculates a weighted score (30pts for Sweep, 30pts for FVG, 40pts for Momentum). Step 4: It draws the zone with a transparency level designated by the score and appends the relevant icons. 💡 Note: For the best results, use this indicator on the timeframe you execute trades on (e.g., 15m or 1h). Do not use it to find entries on the 1m chart if your analysis is based on the 4h chart.
Penunjuk Pine Script®
oleh PhenLabs
Filter Bar1. Indicator Name Filter Bar 2. One-line Introduction A trend-aware bar coloring system that visualizes market direction and strength through adaptive transparency based on regression scoring. 3. General Overview Filter Bar+ is a minimalist but powerful trend visualization tool that colors chart bars according to market direction and momentum strength. It analyzes the linear regression trend alignment over a specified lookback period and uses a pairwise comparison algorithm to determine whether the market is in a bullish, bearish, or neutral state. The result is a "trend score" that gets normalized to reflect trend intensity (0~1). Bar colors are then dynamically updated using the specified bullish or bearish base colors, where higher intensity results in more opaque (darker) bars, and weaker trends lead to lighter, faded tones. If no strong trend is detected, bars are shown in gray, signaling indecision or neutrality. The strength of this indicator lies in its simplicity—it doesn’t draw lines, waves, or shapes, but overlays insight directly onto the chart through smart color cues. It’s particularly effective as a background filter for price action traders, scalpers, and anyone who prefers clean charts but still wants embedded directional context. 4. Key Advantages 🎨 Adaptive Bar Coloring Bar color opacity increases with trend strength, offering instant visual confirmation without clutter. 📊 Quantified Trend Direction Uses a regression-based scoring system to reliably detect uptrends, downtrends, or sideways markets. ⚖️ Customizable Sensitivity Parameters like lookback period and tolerance percentage give users full control over signal responsiveness. 🧼 Clean Chart Presentation No lines, shapes, or overlays—just color-coded bars that blend into your existing chart setup. 🚀 Lightweight & Fast Minimal computational load ensures it works smoothly even on lower-end devices or multiple chart setups. 🔒 Secure Internal Logic Algorithm is neatly encapsulated and optimized, with no critical logic exposed. 📘 Indicator User Guide 📌 Basic Concept Filter Bar+ evaluates trend direction and strength using a pairwise comparison of linear regression values. The result determines whether the market is bullish, bearish, or neutral, and adjusts bar colors accordingly. It visually amplifies the current market state without drawing any indicators on the chart. ⚙️ Settings Explained Lookback Period: Number of bars used to compare regression values Range Tolerance (%): Minimum score required to label a trend as bullish or bearish Regression Source: Data input used for regression (default: close) Linear Regression Length: Period for generating the base regression line Bull/Bear Base Colors: Choose colors to represent bullish or bearish bars 📈 Buy Timing Example Bars are green (or user-set bullish color) and becoming more vivid Indicates a strengthening bullish trend; helpful when used alongside breakout confirmation or support zones 📉 Sell Timing Example Bars turn red (or your custom bearish color) with increasing opacity Signals growing bearish pressure; acts as confirmation during short setups or breakdowns 🧪 Recommended Use Cases Combine with volume, RSI, or price action setups for direction filtering Ideal for clean chart strategies where visual simplicity is preferred Use as a confirmation layer to reduce noise in sideways markets 🔒 Precautions This is a visual filter, not a signal generator—use alongside other strategies for entries/exits In choppy markets, bars may flicker between colors—adjust sensitivity as needed Works best when you already have a directional thesis and want to validate it visually Always test settings for your asset/timeframe before applying in live trades
Penunjuk Pine Script®
oleh c9indicator
Gann Levels (Auto) by RRR📌 Gann Levels (Auto) — Intraday, Swing & Elliott Wave Precision Tool Gann Levels (Auto) is a high-accuracy price-reaction indicator designed for intraday scalpers, swing traders, and Elliott Wave traders who want clean, auto-updating support and resistance levels without manually drawing anything. The indicator automatically detects the latest swing high & swing low and plots the 8 Gann Octave Levels between them. These levels act as a complete price map—showing equilibrium, structure, trend continuation zones, and reversal points with extreme precision. 🔥 Why This Indicator Stands Out ✔ Fully automatic swing detection Levels update as structure evolves — no manual adjustments. ✔ All Gann Octave levels Plots 1/8 through 8/8 including the critical 4/8 midpoint. ✔ Intraday-optimized Exceptional on 1m, 3m, 5m, and 15m charts. ✔ Ultra-clean support & resistance Levels act as reliable barriers and breakout zones. ⭐ MOST IMPORTANT LEVELS FOR INTRADAY 4/8 – Midpoint (Major Decision Pivot) Strongest Gann level. Controls trend or reversal for the session. Breakout → Trend Day Rejection → Reversal Day 8/8 & 0/8 – Extreme Structure Edges Most likely zones for intraday reversals. Perfect for scalp entries when combined with volume exhaustion. 🎯 How to Trade ELLIOTT WAVE Using Gann Levels This indicator is exceptionally powerful when combined with Elliott Wave Theory. Here is how to use it wave-by-wave: 🔵 Wave 2 → Identify Bottom Using 0/8 or 1/8 Levels Wave 2 typically retraces deep but remains above key structure. Gann confirmation: Price stops at 0/8 or 1/8 zone Rejection wick + low volume breakdown attempt Bullish intent starts forming This gives a perfect Wave 3 entry zone. 🔴 Wave 3 → Breakout Above 4/8 Midpoint Wave 3 is the strongest impulsive wave. The 4/8 level works like a force-field. Wave 3 confirmation: Price breaks and retests 4/8 Strong volume No deep pullbacks after break This is one of the most reliable Elliott + Gann trades. 🟡 Wave 4 → Uses 3/8 or 5/8 as Support/Resistance Wave 4 is corrective and shallow compared to Wave 2. Gann alignment: Wave 4 often consolidates between 3/8 and 5/8 Levels act like range boundaries Avoid trading inside chop; wait for breakout This gives perfect continuation entries for Wave 5. 🟣 Wave 5 → Ends Near 7/8 or 8/8 Extreme Zone Wave 5 usually ends in overbought territory. Gann confirmation: Price hits 7/8 or 8/8 Momentum weakens Divergence builds (RSI/MACD optional) Last push = exhaustion This is where reversals or major pullbacks begin. 💥 BONUS: Corrective Waves (A-B-C) Wave A: Often rejects from 4/8 or 5/8. Wave B: Typically trapped between 3/8–5/8. Wave C: Usually ends around 0/8 (for bullish trend) or 8/8 (for bearish trend). These zones give ultra-high confidence entries. ⚙️ Who This Indicator Is Perfect For Elliott Wave traders Intraday scalpers Swing traders Price action & structure traders Traders who want automatic support-resistance levels Traders who want clean, non-cluttered levels ⚠️ Disclaimer This indicator is for educational purposes only. Trading involves risk. Always use proper risk management.
Penunjuk Pine Script®
oleh RAGSTER123