Mulakan

Cari dalam skrip untuk "Open Close Cross"

Open Close Cross Strategy R5 revised by JustUncleLThis revision is an open Public release, with just some minor changes. It is a revision of the Strategy "Open Close Cross Strategy R2" originally published by @JayRogers. *** USE AT YOUR OWN RISK *** JayRogers : "There are drawing/painting issues in pinescript when working across resolutions/timeframes that I simply cannot fix here.. I will not be putting any further effort into developing this until such a time when workarounds become available." NOTE: Re-painting has not been observed with the default set up, nor with Alternate resolution multiplier up to 5. Description: Strategy based around Open-Close Moving Average Crossovers optionally from a higher time frame. Setup: I have generally found that setting the strategy resolution to 3-5x that of the chart you are viewing tends to yield the best results, regardless of which MA option you may choose (if any) BUT can cause a lot of false positives - be aware of this. JustUncleL: using one of the Smoothed MA helps reduce false positives. Don't aim for perfection. Just aim to get a reasonably snug fit with the O-C band, with good runs of green and red. JustUncleL: using SMMA (8 to 10) gives a good fit. Option to either use basic open and close series data, or pick your poison with a wide array of MA types. Optional Stop Loss and Target Profit for damage mitigation if desired (can be toggled on/off) Positions get taken automatically following a crossover - which is why it's better to set the resolution of the script greater than that of your chart, so that the trades get taken sooner rather than later. If you make use of the stops/target profit, be sure to take your time tweaking the values. Cutting it too fine will cost you profits but keep you safer, while letting them loose could lead to more draw down than you can handle. Revsion R5 Changes by JustUncleL Corrected cross over calculations, sometimes gave false signals. Corrected Alternate Time calculation to allow for Daily,Weekly and Monthly charts. Open Public release. Revision R4 By JustUncleL Change the way the Alternate resolution in selected, use a Multiplier of the base Time Frame instead, this makes it easy to switch between base time frames. Added TMA and SSMA moving average options. But DEMA is still giving the best results. Using "calc_on_every_tick=false" ensures results between back testing and real time are similar. Added Option to Disable the coloring of the bars. Updated default settings. R3 Changes by JustUncleL: Returned a simplified version of the open/close channel, it shows strength of current trend. Added Target Profit Option. Added option to reduce the number of historical bars, overcomes the too many trades limit error. Simplified the strategy code. Removed Trailing Stop option, not required and in my option does not work well in Trading View, it also gives false and unrealistic performance results in back testing. R2 Changes by @JayRogers: Simplified and cleaned up plotting, now just shows a Moving Average derived from the average of open/close. Tried very hard to alleviate painting issues caused by referencing alternate resolution.
Strategi Pine Script®
oleh JustUncleL
267
Open Close Cross Alert R6 by JustUncleLThis revision of this indicator is an Open Public release. The indicator alert based on JayRogers "Open Close Cross Strategy R2" and is used in conjunction with the revised "Open Close Cross Strategy R5". Description: This indicator alert created for TradingView alarm sub-system (via the alertcondition() function, which currently does not work in a "Strategy" script). Also this indicator plots the Difference Factor between the Close and Open Moving Averages, this gives a good indication of strength of move. Also included in this release is optional Divergence finder with variable width channel.
Penunjuk Pine Script®
oleh JustUncleL
83
Open Close Cross Strategy R6.1 revised by yourmattieOriginal version: Open Close Cross Strategy R5 revised by JustUncle. Change: script changed to a study script with custom alerts. This revision is an open Public release, with just some minor changes. It is a revision of the Strategy "Open Close Cross Strategy R2" originally published by @JayRogers. Revised by JustUncleL Description : Strategy based around Open-Close Moving Average Crossovers optionally from a higher time frame. Read more about the indicator original script Klik here ##USE AT YOUR OWN RISK## Use this as overlayer on the original strategy to set custom alerts. Info: with this study script no buy/sell arrows show up op the chart. Does some know a solution for this issue: Issue: sometimes it gives a false signal because even when you set "one per bar close" the custom set alert might come halfway the bar....and it might be a false signal when the bar is closed Does somone know a fix for this? I tried with barstate.iscomfirmed but it didn't work for me. Ps. I'm not a developer...just changed the scipt by watching a youtube tutorial.
Penunjuk Pine Script®
oleh yourmattie
35
Open Close Cross Strategy NoRepaint Version by JustUncleLThis is a Non Repaint version of my ever popular "Open Close Cross Strategy R5 revised by JustUncleL". After many comments/PMs on repainting issues of the original script, I decided to create this Non Repaint version for those that require non-repainting signals. Backtesting performance will not be as good as the repaint version, but some script maybe still useful as there are many options that can be adjusted.
Strategi Pine Script®
oleh JustUncleL
54
OCC Strategy Optimized (MA 5 + Delayed TSL)# OCC Strategy Optimized (MA 5 + Delayed TSL) - User Guide ## Introduction The **OCC Strategy Optimized** is an enhanced version of the classic **Open Close Cross (OCC)** strategy. This strategy is designed for high-precision trend following, utilizing the crossover logic of Open and Close moving averages to identify market shifts. This optimized version incorporates advanced risk management, multi-timeframe analysis, and a variety of moving average types to provide a robust trading solution for modern markets. > > **Special Thanks:** This strategy is based on the original work of **JustUncleL**, a renowned Pine Script developer. You can find their work and profile on TradingView here: (in.tradingview.com). --- ## Key Features ### 1. Optimized Core Logic - **MA Period (Default: 5):** The strategy is tuned with a shorter MA length to reduce lag and capture trends earlier. - **Crossing Logic:** Signals are generated when the Moving Average of the **Close** crosses the Moving Average of the **Open**. ### 2. Multi-Timeframe (MTF) Analysis - **Alternate Resolution:** Use a higher timeframe (Resolution Multiplier) to filter out noise. By default, it uses $3 \times$ your current chart timeframe to confirm the trend. - **Non-Repainting:** Includes an optional delay offset to ensure signals are confirmed and do not disappear (repaint) after the bar closes. ### 3. Advanced Risk Management This script features a hierarchical exit system to protect your capital and lock in profits: - **Fixed Stop Loss (Initial):** Protects against sudden market reversals immediately after entry. - **Delayed Trailing Stop Loss (TSL):** - **Activation Delay:** The TSL only activates after the trade reaches a specific profit threshold (e.g., 1%). This prevents being stopped out too early in the trade's development. - **Ratchet Trail:** Once activated, the stop loss "ratchets" up/down, never moving backward, ensuring you lock in profits as the trend continues. - **Take Profit (TP):** A fixed percentage target to exit the trade at a pre-defined profit level. ### 4. Versatility - **12 MA Types:** Choose from SMA, EMA, DEMA, TEMA, WMA, VWMA, SMMA, HullMA, LSMA, ALMA, SSMA, and TMA. - **Trade Direction:** Toggle between Long-only, Short-only, or Both. - **Visuals:** Optional bar coloring to visualize the trend directly on the candlesticks. --- ## User Input Guide ### Core Settings - **Use Alternate Resolution?:** Enable this to use the MTF logic. - **Multiplier for Alternate Resolution:** How many charts higher the "filter" timeframe should be. - **MA Type:** Select your preferred moving average smoothing method. - **MA Period:** The length of the Open/Close averages. - **Delay Open/Close MA:** Use `1` or higher to force non-repainting behavior. ### Risk Management Settings - **Use Trailing Stop Loss?:** Enables the TSL system. - **Trailing Stop %:** The distance the stop follows behind the price (Optimized Default: 1.5%). - **TSL Activation % (Delay):** The profit % required before the TSL starts moving. (Optimized Default: 2.0% to ensure 0.5% profit is locked immediately). - **Initial Fixed Stop Loss %:** Your hard stop if the trade immediately goes against you. - **Take Profit %:** Your ultimate profit target for the trade. --- ## How to Trade with This Strategy 1. **Identify the Trend:** Look for the Moving Average lines (Close vs Open) to cross. 2. **Wait for Confirmation:** If using MTF, ensure the higher timeframe also shows a trend change. 3. **Manage the Trade:** Let the TSL work. With the default **2.0% Activation** and **1.5% Trail**, the strategy will automatically lock in **0.5% profit** the moment the threshold is hit, then follow the price higher. 4. **Position Sizing:** Adjust the `Properties` tab in the script settings to match your desired capital allocation (Default is 10% of equity). --- ## Recommended Settings 1. Trialing < Activation 2. Check ranging ## Credits Original Strategy by: **JustUncleL** Optimized and Enhanced by: **Antigravity AI**
Strategi Pine Script®
oleh trade_crush
5
Antigravity OCC Strategy (MA 5 + Delayed TSL)# OCC Strategy Optimized (MA 5 + Delayed TSL) - User Guide ## Introduction The **OCC Strategy Optimized** is an enhanced version of the classic **Open Close Cross (OCC)** strategy. This strategy is designed for high-precision trend following, utilizing the crossover logic of Open and Close moving averages to identify market shifts. This optimized version incorporates advanced risk management, multi-timeframe analysis, and a variety of moving average types to provide a robust trading solution for modern markets. > > **Special Thanks:** This strategy is based on the original work of **JustUncleL**, a renowned Pine Script developer. You can find their work and profile on TradingView here: (in.tradingview.com). --- ## Key Features ### 1. Optimized Core Logic - **MA Period (Default: 5):** The strategy is tuned with a shorter MA length to reduce lag and capture trends earlier. - **Crossing Logic:** Signals are generated when the Moving Average of the **Close** crosses the Moving Average of the **Open**. ### 2. Multi-Timeframe (MTF) Analysis - **Alternate Resolution:** Use a higher timeframe (Resolution Multiplier) to filter out noise. By default, it uses $3 \times$ your current chart timeframe to confirm the trend. - **Non-Repainting:** Includes an optional delay offset to ensure signals are confirmed and do not disappear (repaint) after the bar closes. ### 3. Advanced Risk Management This script features a hierarchical exit system to protect your capital and lock in profits: - **Fixed Stop Loss (Initial):** Protects against sudden market reversals immediately after entry. - **Delayed Trailing Stop Loss (TSL):** - **Activation Delay:** The TSL only activates after the trade reaches a specific profit threshold (e.g., 1%). This prevents being stopped out too early in the trade's development. - **Ratchet Trail:** Once activated, the stop loss "ratchets" up/down, never moving backward, ensuring you lock in profits as the trend continues. - **Take Profit (TP):** A fixed percentage target to exit the trade at a pre-defined profit level. ### 4. Versatility - **12 MA Types:** Choose from SMA, EMA, DEMA, TEMA, WMA, VWMA, SMMA, HullMA, LSMA, ALMA, SSMA, and TMA. - **Trade Direction:** Toggle between Long-only, Short-only, or Both. - **Visuals:** Optional bar coloring to visualize the trend directly on the candlesticks. --- ## User Input Guide ### Core Settings - **Use Alternate Resolution?:** Enable this to use the MTF logic. - **Multiplier for Alternate Resolution:** How many charts higher the "filter" timeframe should be. - **MA Type:** Select your preferred moving average smoothing method. - **MA Period:** The length of the Open/Close averages. - **Delay Open/Close MA:** Use `1` or higher to force non-repainting behavior. ### Risk Management Settings - **Use Trailing Stop Loss?:** Enables the TSL system. - **Trailing Stop %:** The distance the stop follows behind the price. - **TSL Activation % (Delay):** The profit % required before the TSL starts moving. - **Initial Fixed Stop Loss %:** Your hard stop if the trade immediately goes against you. - **Take Profit %:** Your ultimate profit target for the trade. --- ## How to Trade with This Strategy 1. **Identify the Trend:** Look for the Moving Average lines (Close vs Open) to cross. 2. **Wait for Confirmation:** If using MTF, ensure the higher timeframe also shows a trend change. 3. **Manage the Trade:** Let the TSL work. Once the trade hits the activation threshold, the TSL will take over, protecting your runner. 4. **Position Sizing:** Adjust the `Properties` tab in the script settings to match your desired capital allocation (Default is 10% of equity). --- ## Credits Original Strategy by: **JustUncleL** Optimized and Enhanced by: **Antigravity AI**
Strategi Pine Script®
oleh trade_crush
13
Customizable OCC Non Repainting Scalper Bot v7.0bThis strategy is intended to be used on an automated trading platform and should be run on a one minute chart for fastest confirmations and signal relay to crypto automation platform. The strategy has been modded to only go long at this time to focus on profitability for one direction. The open long and close long text fields allow you to use your own webhook message for this purpose. I have spent quite a bit of time and I figured I would put it out to the community to share the work and also get some feedback. Ok, so let me say that I have done absolutely everything I can to make the strategy not repaint while still maintaining it's profitability. It has been a challenge so I am publishing this to the community to help test this. What I have observed: the strategy will not repaint in real time. That is, if you have the chart open and keep it open, the signals are the same as the ones that are sent out by the strategy. In certain cases, when I reload the chart- the signals might be off from what was sent. In some ways, that is repainting, but it is repainting based on losing the real time data and recalculating from a different set of bars- since I am running it on a one minute chart then the start becomes different when you refresh. To address repainting while keeping the strategy calculating as quickly as possibly I have altered the logic in the following ways: I have made an assumption which might not work for everyone- at the first tick of the next bar, you can almost safefly assume in crypto that if you are looking at the previous bar for information, the open of the current bar was the close of the previous bar. This for the most part holds true in crypto with good liquidity. If you are trading a pair that jumps around due to low volume- this might not be the strategy to use. I might publish a different version with a different logic. I have altered the security repaint to use isbarconfirmed, so at the very end of the bar (as soon as the bar is confirmed), we recalculate to the higher time frames. So as soon as the data is available, it is at that point that we can then safely calculate higher time frames. This is unique and experimental, but seems to do well at creating good signals for entry. I have employed my own intervals by utilizing the resolution as an integer (used by the previous authors)- but in this case, I use the interval to take a snapshot of the higher time frame. With open close cross, the different moving averages can cause the repainting as they change to show the exact point of the cross. The interval feature I created minimizes this by utilizing the previous bar info until the interval is closed and then we recalculate the variants. You can use the interval offset feature to denote which minute is the one that starts and ends the interval. So for instance, Trading View uses minue 1 and minute 31 for 30 minute intervals. If you offset your 30 minute interval would start on minute 16 and do its calculations based on the last 30 minutes, As with most of my scripts, I have started using filters and a "show data" feature that will give you the ability to see the values of indicators that you cannot plot in the overlay. This allows you to figure out how to filter losing trades or market conditions. I have also added a trailing stop and created a fixed stop loss as seems to perform better than the original occ strategy. The original one seemed to repaint enough that it would close too quickly and not give the posiition enough time to become profitable. In certain cases where there was a large move, it would perform well, but for the most part the trades would not close profitably even though the backtest said that it did - probably due to the delay in execution and pinescript not having a confirmation on what the actual position price was. This is still in beta mode, so please forward test first and use at your own risk. If you spot repaint issues, please send me a message and try to explain the situation.
Strategi Pine Script®
oleh MauricioZuniga
23
RSI MTF by PeterOThis is my take on reaching Higher TimeFrame charts, what is usually helpful when determining the trend. On the example of RSI. So imagine you want to check RSI from higher timeframe. 15x higher for example. There are 3 ways to do it. 1. security(tickerid,"15",rsi(close,14)) DON'T!!! I strongly advise against this method. Security() function is buggy in PineScript, leads to so-called "repainting" issues. Repainting is caused by creating leak from future data and leads to abnormally fantastic strategy backtest results like the one in Open Close Cross Strategy. Theoretically speaking if security() used correctly - with Pine version3 and barmerge.lookahead_off - you should encounter no repainting, but I could swear I saw scripts repaint even with security() implemented properly. Even assuming security() implemented correctly will not repaint - it will create delay in your script. I'm using "15" multiplier in my example, and this means, I have to wait for 15 candles to close to produce indicators value. If a strong move happens in the meantime, I'm blind, because I have to wait anyway. So for your own security, stay away from security() at all times. 2. rsi(close,14*15) This will produce RSI plot with no delay, but a very flattened one. RSI will move between 45 and 45, never even reaching 30 or 70 levels. So pretty useless. 3. Dig-in-the-formula way. Doing a bit more math produces RSI line, which is not delayed, not repainting and moving in full 0-100 RSI range. Actually - looking almost identical to the one from the higher timeframe. Which was the goal of this script.
Penunjuk Pine Script®
oleh Peter_O
16