Mulakan

Cari dalam skrip untuk "a股开盘前15分钟交易规则"

ADX +- DiThis Adx +-Di is just a complete version of what the ADX is supposed to signal. So you have: 15 (contraction), 20 (threshold), 30 (expansion), 40 (resistance) levels. Below 20 the price is not trending Above 30 the price is trending Below 15 price has been in contraction for too long Between 20 and 30 price is in a "transition zone". I finally added a "Resistance" level (40), which has to be adapted to best represent the historical levels where price usually encounters resistance, and where the price can be declared "overtrending", which means a return to lower levels is likely to happen. I've chosen mild colors, and set the Adx Color to White, because I use black background, you can easily change that. Enjoy -Maurice
Penunjuk Pine Script®
oleh MauriceEverthin
GoTiT|Simple Auto Fib v1.0Simple Auto Fib! Notes: 1. Always set the trend manually! Don't rely on the auto trend detection. 2. The first parameter Length sets the number of candles back (left) to search for highs and lows from the current candle. 3. The High Offset parameter sets the number of candles back (left) to ignore/skip before searching for highs. 4. The Low Offset parameter sets the number of candles back (left) to ignore/skip before searching for lows. 5. The offset parameters change the behavior of the Length parameter. Example 1: Length = 100 High Offset = 0 Low Offset = 0 This is the default behavior, and the search for highs and lows occurs on the last 100 candles. Example 2: Length = 50 High Offset = 20 (Ignore the last 20 candles, and search for highs starting at candle 21 to 71 (or 50 candles back) Low Offset = 15 (Ignore the last 15 candles, and search for lows starting at candle 16 to 66 (or 50 candles back) In example 2, search starts on candle 21 for highs, and candle 16 for lows and extends 50 candles further back from there. 6. The Trend Detection parameter sets the number of candles back (left) to use in the trend calculations. Larger values give better "marco trend" detection. Smaller values give better "micro trend" detection. See note #1. 7. The white fib line is fib0. Assuming you correctly set the trend manually (or the trend is auto detected correctly), in a downtrend fib0 should be bellow the red fib line, and in an uptrend fib0 should be above the red fib line.
Penunjuk Pine Script®
oleh gotit
Fractal Resonance BarLazyBear's WaveTrend port has been praised for highlighting trend reversals with precision and punctuality (minimal lag). But strong "3rd Wave" trends can "embed" or saturate any oscillator flashing several premature crosses while stuck overbought/oversold. This happens when the trend stretches over a longer timescale than the oscillator's averaging window or filter time constant. Our solution: monitor many timescales. With Fractal Resonance Bar's rich color codings, strong wavefronts form across timescales and jump out like an approaching line of thunderclouds! Fractal Resonance Bar color-codes the status of eight underlying stochastic oscillators, with each row averaging over twice the time of the row above. Fractal Resonance Bar shifts its timescales along with your choice of main chart timescale: 1 minute chart: 1 minute through 128 minute (~2 hour) oscillators. 15 minute chart: 15 minute through 1920 minute (~32 hour) oscillators. 1 hour chart: 1 hour through 128 hour (~2 week) oscillators. Daily chart: 1 day through 128 day (~4 month) oscillators. The color map is configured as follows: Hot Pink: Extreme Overbought (> 100%) rolled over to sell, but oscillators probably embedded with more upside (revert to Dark Green) possible after a pause. Deep Red: Overbought (> 75%) crossover ripe for selling (validated when red spreads to timescales below). Brown: Minor (< 75%) crossover sell from which could bounce back green or start a plunge toward gray/black. Gray/Black: Mature (< -75%) sells turning full black in a plunge before the dawn. Lime Green: Extreme Oversold (< -100%) and bouncing, though may yet bottom even lower. Green: Oversold (< -75%) crossover ripe for buy. Green spreading to all timescales below will validate bottom is in. Dark Green/Teal: Mature buy in overbought (> 75%) range, waiting for sell crossover to Hot Pink for a pause or correction. White Stripes are Impulsive Trend Warning Fractal Resonance Bar warns of oscillator embedding by showing white stripes when it detects strong, early surges in the timescale rows below.The white stripes usually accompany Hot Pink warning it's too early to go short, or Lime Green warning it's too early to go long. Heeding these warnings will probably miss the exact top or bottom, but you're less likely to get overrun in a momentum move. Usually the market gives us a second opportunity to short very close to the top or buy very close to the bottom after the warning white stripes have subsided. NOTE: Recently rolled over Futures contracts may not have enough history for all oscillator calculations, in which case no bar colors will appear. Tweakable Attributes The default Channel Length, Stochastic Ratio Length and Lag Length work reasonably well on all timescales in our experience. Minor tweaks don't hurt but this may just overfit to a particular chart history. We don't recommend changing the 75% Overbought and 100% Extreme Overbought default levels as these are ideal numbers relative to the underlying oscillator statistic calculations. But these settings can shift the color transition levels. Embedded attribute controls the sensitivity/conservativeness of the white strip embedding detectors. Closer to 75 increases the warning sensitivity while closer to 100 decreases the aggressiveness of blocking white stripes. Embed Separation also affects the white stripe sensitivity. Row width increases each row's thickness to fill the available screen height you've afforded the bar.
Penunjuk Pine Script®
oleh pythagoras
12
extended session - Regular Opening-Range- JayyOpening Range and some other scripts updated to plot correctly (see comments below.) There are three variations of the fibonacci expansion beyond the opening range and retracements within the opening range of the US Market session - I have not put in the script for the other markets yet. The three scripts have different uses and strengths: The extended session script (with the script here below) will plot the opening range whether you are using the extended session or the regular session. (that is to say whether "ext" in the lower right hand corner is highlighted or not.). While in the extended session the opening range has some plotting issues with periods like 13 minutes or any period that is not divisible into 330 mins with a round number outcome (eg 330/60 =5.5. Therefore an hour long opening range has problems in the extended session. The pre session script is only for the premarket. You can select any opening range period you like. I have set the opening range to be the full premarket session. If you select a different session you will have to unselect "pre open to 9:30 EST for Opening Range?" in the format section. The script defaults to 15 minutes in the "period Of Pre Opening Range?". To go back to the 4 am to 9:30 pre opening range select "pre open to 9:30 EST for Opening Range?" there is no automatic 330 minute selection. The past days offset script only works in 5 min or 15 minute period. It will show the opening range from up to 20 days past over the current days price action. Use this for the regular session only. 0 shows the current day's opening range. Use the positive integers for number of days back ie 1, 2, 3 etc not -1, -2, -3 etc. The script is preprogrammed to use the current day (0). Scripts updated to plot correctly: One thing they all have in common is a way of they deal with a somewhat random problem that shifts the plots 4 hours in one direction or the other ie the plot started at 9:30 EST or 1:30PM EST. This issue started to occur approximately June 22, 2015 and impacts any script that tried to use "session" times to manage a plot in my scripts. The issue now seems to have been resolved during this past week. Just in case the problem reoccurs I have added a "Switch session plot?" to each script. If the plot looks funny check or uncheck the "Switch session plot?" and see the difference. Of course if a new issue crops up it will likely require a different fix. I have updated all of the scripts shown on this chart. If you are using a script of mine that suffers from the compiler issue then you will find an update on this chart. You can get any and all of the scripts by clicking on the small sideways wishbone on the left middle of the chart. You will see a dialogue box. Then click "make it mine". This will import all of the scripts to your computer and you can play around with them all to decide what you want and what you don't want. This is the easiest way to get all of the scripts in one fell swoop. It is also the easiest way for me to make all of the scripts available. I do not have all of the plots visible since it is too messy and one of the scripts (pre OR) is only for the regular session. To view the scripts click on the blue eye to the right of the script title to show it on this script. If you can only use the regular session. The scripts will all (with the exception of the pre OR) work fine. If for any reason this script seems flakey refresh the page r try a slightly different period. I have noticed that sometimes randomly the script loves to return to the 5 min OR. This is a very new issue transient issue. As always if you see an issue please let me know. Cheers Jayy
Penunjuk Pine Script®
oleh jayy
1
BB 100 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 25 with Barcolors".
Penunjuk Pine Script®
oleh rmwaddelljr
BB 25 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 100 with Barcolors".
Penunjuk Pine Script®
oleh rmwaddelljr
1
KK_Intraday MAsHey guys, today I was browsing through intraday Charts looking at some moving averages. Basically what I wanted to see was whether the currency pair was trading below or above the moving average of the day/week/month. For a better understanding: The daily MA on a 15 minute Forex Chart would be the 96 MA. I encountered the problem that i always had to change the settings for my MAs when changing the Time Interval, so I coded this here up. It is pretty simple but maybe somebody else has the same problem and can put it to use. The script has some settings as listed below: Choice which MAs to plot, (Daily, Weekly, Monthly) Choice which type of MA to use (Simple, Exponential, Weighted) Neccesary Settings for the correct calculation (e.g. Number of trading hours per day). These settings depend on the instrument you are using and should always be checked before using this script. There are a few things to Note when using this script: This script works for intraday charts only. The monthly MA doesn't work on any Time Interval smaller than 15 minutes. Can't do anything about it unfortunately. This is my first published Script, use it with caution and let me know what you think about it!
Penunjuk Pine Script®
oleh Kurbelklaus
2
Opening Range Breakout with 2 Profit Targets.Opening Range Breakout with 2 Profit Targets. Updated Indicator now works on all Symbols with Many Different Session Options. ***Known PineScript Issue…While the Opening Range is being Formed the lines only adjust for that individual bar. Just reset Indicator after Opening Range Completes. ***All Times are Based on New York Time Session Options Forex U.S. Banks Open (8:00), Gold U.S. Open (8:20), Oil U.S. Open (9:00), U.S. Cash Session - Stocks (9:30), NY Forex Open (17:00) , Europe Open (02:00), or if you choose Setting 0 the Session Runs from 00:00 to 00:00 (Midnight to Midnight). ***Ability to use 60 minute Opening Range, 30 minute, 15 minute, and many other options. ***However you can manually change the times in the Inputs Tab to adjust for any session you prefer. This is useful for Day Light Savings Adjustments. Also the default times work if your charts are set to EST Time. If you use A different time zone in your settings you need to Adjust the times in the inputs tab. Initially Opening Range High and Low plot as Yellow Lines. If Price Goes Above Opening Range then Line Turns Green. If Price Goes Below Opening Range Line Turns Red. By default the First Profit Target is 1/2 the Width of the Opening Range and the 2nd Profit Target is 1 Times the Opening Range. However these are Adjustable in the Inputs Tab. By Default the Opening Range Length is 1 Hour. However, you can Change the Opening Range Length to 15 min, 30 min, 2 hours etc. in the Inputs Tab. Plots a 1 Above or Below Candle when 1st Profit Target is Achieved, and a 2 when 2nd Profit Target is Achieved.
Penunjuk Pine Script®
oleh ChrisMoody
91
Indicator: Trend Trigger FactorIntroduced by M.H.Pee, Trend Trigger Factor is designed to keep the trader trading with the trend. System rules according to the developer: * If the 15-day TTF is above 100 (indicating an uptrend), you will want to be in long positions. * If the 15-day TTF is below -100, you will want to be short. * If it is between -100 and 100, you should remain with the current position. More info: Original Article by Mr.Pee: drive.google.com
Penunjuk Pine Script®
oleh LazyBear
15
Liquidity Sweep ReversalOverview The Liquidity Sweep Reversal indicator is a sophisticated intraday trading tool designed to identify high-probability reversal opportunities after liquidity sweeps occur at key market levels. Based on Smart Money Concepts (SMC) and Institutional Order Flow analysis, this indicator helps traders catch market reversals when stop-loss clusters are hunted. Key Features 🎯 Multi-Level Liquidity Analysis Previous Day High/Low (PDH/PDL) detection Previous Week High/Low (PWH/PWL) tracking Session highs/lows for Asian, London, and New York markets Real-time level validation and usage tracking ⚡ Advanced Signal Generation CISD (Change In State of Delivery) detection algorithm Engulfing pattern recognition at key levels Liquidity sweep confirmation system Directional bias filtering to avoid false signals ⏰ Kill Zone Integration Pre-configured optimal trading windows Asian Kill Zone (20:00-00:00 EST) London Kill Zone (02:00-05:00 EST) New York AM/PM Kill Zones (08:30-11:00 & 13:30-16:00 EST) Optional kill zone-only trading mode 🛠 Customization Options Multiple timezone support (NY, London, Tokyo, Shanghai, UTC) Flexible HTF (Higher Time Frame) selection Adjustable signal sensitivity Visual customization for all levels and signals Hide historical signals option for cleaner charts How It Works The indicator continuously monitors price action around key liquidity levels When price sweeps liquidity (stop-loss hunting), it marks potential reversal zones Confirmation signals are generated through CISD or engulfing patterns Trade signals appear as arrows with color-coded candles for easy identification Best Suited For Intraday traders focusing on 1m to 15m timeframes Smart Money Concepts (SMC) practitioners Scalpers looking for high-probability reversal entries Traders who understand liquidity and market structure Usage Tips Works best on liquid forex pairs and major indices Combine with volume analysis for stronger confirmation Use proper risk management - not all signals will be winners Monitor higher timeframe bias for better accuracy ============================================== 日内流动性掠夺反向开单指标 指标简介 这是一款基于Smart Money概念（SMC）开发的高级日内交易指标，专门用于识别市场在关键价格水平扫除流动性后的反转机会。通过分析机构订单流和流动性分布，帮助交易者精准捕捉止损扫单后的市场反转点。 核心功能 多维度流动性分析 前日高低点（PDH/PDL）自动标记 前周高低点（PWH/PWL）动态跟踪 亚洲、伦敦、纽约三大交易时段高低点识别 关键位使用状态实时监控，避免重复信号 智能信号系统 CISD（Change In State of Delivery）算法检测 关键位吞没形态识别 流动性扫除确认机制 方向过滤系统，大幅降低虚假信号 黄金交易时段 内置Kill Zone时间窗口 支持亚洲、伦敦、纽约AM/PM四个黄金时段 可选择仅在Kill Zone内交易 时区智能切换，全球交易者适用 个性化设置 支持多时区切换（纽约/伦敦/东京/上海/UTC） HTF周期自动适配或手动选择 信号灵敏度可调 所有图表元素均可自定义样式 历史信号隐藏功能，保持图表整洁 适用人群 日内短线交易者（1分钟-15分钟） SMC交易体系践行者 追求高胜率反转入场的投机者 理解流动性和市场结构的专业交易者 使用建议 推荐用于主流加密货币、外汇对和股指期货 配合成交量分析效果更佳 严格止损，理性对待每个信号 关注更高时间框架的趋势方向 风险提示： 任何技术指标都不能保证100%准确，请结合自己的交易系统和风险管理使用。
Penunjuk Pine Script®
oleh fantuan6
Market Pulse Dip RadarThis indicator is designed to help traders spot meaningful dips in price and then evaluate whether those dips are worth trading or not. It doesn’t just mark a dip; it also helps with risk management, trade planning, and filtering out weak signals. Here’s how it works: First, it looks at the recent high price and checks how much the market has dropped from that high. If the drop is larger than the minimum percentage you set, it marks it as a potential dip. Next, it checks the trend structure by using two moving averages (a fast one and a slow one). If the fast average is below the slow average, it means the market is in a weaker structure, and that dip is considered more valid. On top of that, you can enable a multi-timeframe filter. For example, if you are trading on the 15-minute chart, you can ask the indicator to confirm that the 1-hour trend is also supportive before showing you a dip. This helps avoid trading against the bigger trend. Risk management is built in. The indicator automatically suggests a stop-loss by combining volatility (ATR) and recent swing lows. It then draws three profit target levels (1x risk, 2x risk, and 3x risk). This makes it easier to plan where to exit if the trade works. A key part of this tool is the confidence score. Each dip signal is rated from 0 to 100. The score depends on how deep the dip is, how far apart the moving averages are, how healthy volatility is, and whether the higher timeframe supports the trade. The score is then labeled as High, Medium, Low, or Wait. This helps traders focus only on the stronger setups. On the chart, dip signals are marked with a diamond shape under the bars. The color of the diamond tells you if it’s high, medium, or low quality. When a signal appears, the indicator also plots horizontal lines for the entry, stop, and targets. To make it easier to read, there is also a dashboard box that shows the current score, quality, dip percentage, and suggested stop-loss. This means you don’t have to calculate or check different things yourself – everything is visible in one place. Finally, it comes with alerts. You can set alerts for when a dip signal happens, or when it’s medium or high confidence. This way, you don’t need to stare at charts all day; TradingView can notify you. So in short, this tool: • Finds dips based on your rules. • Filters them using structure, volatility, and higher timeframe trend. • Suggests stop-loss and profit targets. • Rates each dip with a confidence score. • Shows all this info in a clean dashboard and alerts you when it happens. 👉 Do you want me to now explain how a trader would actually use it in practice (step by step, from signal to trade)?
Penunjuk Pine Script®
oleh SupertradeOfficial
Smart Multi-Confirm Reversal DetectorHow the Smart Multi-Confirm Reversal Detector Works The indicator works by analyzing candlestick patterns, trend, and technical confirmations and then scoring each bar to determine the strength of a potential reversal. Here’s the step-by-step logic: Step 1: Analyze Candlestick Patterns For each new candle, the indicator checks if any of the selected patterns occur: Wick Reversal (Long Lower Wick): Looks for candles with a small body and a long lower shadow. Indicates buying pressure (potential bullish reversal). Inverted Wick (Long Upper Wick): Looks for candles with a small body and a long upper shadow. Indicates selling pressure (potential bearish reversal). Body Engulf: The current candle completely “engulfs” the previous candle. Signals a strong change in momentum. Tweezer Patterns: Two consecutive candles with almost identical highs or lows. Suggests a potential reversal zone. 3-Bar Pattern: Three consecutive bullish or bearish candles in a row. Shows strong momentum continuation or exhaustion, used to confirm reversal. Each pattern can be turned on/off by the user. If a pattern is detected, it contributes points to the overall signal score. Step 2: Confirm Trend Direction The indicator checks EMA trend alignment: Fast EMA vs Slow EMA: Fast EMA above Slow EMA → bullish trend. Fast EMA below Slow EMA → bearish trend. Optional Higher Timeframe EMA (HTF) Alignment: Checks if the trend on a higher timeframe matches the current trend. Adds extra weight to the signal if alignment is true. This ensures the signal goes in the direction of the prevailing trend, reducing false signals. Step 3: Check Technical Confirmations Optional filters increase reliability: ADX (Average Directional Index): Measures the strength of the current trend. Only strong trends contribute to the score. RSI (Relative Strength Index): Bullish confirmation: RSI is oversold. Bearish confirmation: RSI is overbought. Volume Spike: Compares current volume to the average volume. High volume validates the signal’s momentum. Body Momentum: Compares current candle’s body size to its average. Larger than average body indicates stronger momentum. Each of these confirmations can be enabled/disabled and has a weight in the scoring system. Step 4: Calculate Score Each pattern and confirmation has a user-defined weight (0–100). The indicator sums the active weights that pass conditions and normalizes to 100. Example: Wick Reversal detected → 30 points Trend EMA confirmed → 15 points ADX confirmed → 10 points Score = 55/100 → may or may not trigger a signal depending on threshold. Score Threshold: Only bars above the user-defined threshold are considered a confirmed signal. Bars above a lower “label threshold” still show a label, even if not strong enough for alerts. Step 5: Visualize Signals Bullish Signals: Green triangle below the candle. Bearish Signals: Red triangle above the candle. Labels: Show the type of pattern and the score. Purpose: Quickly identify potential reversals and assess their strength visually. Step 6: Optional Alerts Fixed alert messages can be enabled for confirmed bullish or bearish signals. Alerts do not recommend trades; they just notify you of pattern confirmations. Complies with TradingView’s policy for safe alert use. Step 7: Weighted Decision The final decision is not binary. Instead, the indicator combines multiple signals into a score, so stronger signals are more reliable. This reduces false positives and gives traders a professional, multi-confirmation approach to detect potential reversals.
Penunjuk Pine Script®
oleh tradingbauhaus
Moon Scalper v3 + VSAMoon Scalper v3 is a high-precision scalping indicator optimized for the 15-minute chart. It delivers clean buy/sell signals with TP1 (1:1 risk-reward) exits using layered confirmations: • **Volatility Bands** — SMA + multiplier detect expansion zones • **EMA Filter (200)** — ensures trades align with trend • **RSI Range Filter** — avoids extreme overbought/oversold traps (buy: 52–62, sell: 38–48) • **Volume Spike Filter** — filters for institutional activity (vol > 1.4×SMA) • **VSA Confirmation** — requires wide-spread, high-volume bars with reclaim (volume × 1.4, spread × 1.5, reclaim 50%) **Usage Notes:** Best used on 15m timeframe for liquid pairs (e.g., BTCUSDT, ETHUSDT). Signals appear as “BUY” / “SELL” labels on chart. Defaults yield high TP1 hit rate; use only during active sessions (e.g., London/NY) for best accuracy. **Disclaimer:** This indicator is for educational purposes only. Past performance is not a guarantee of future results. Always backtest before live trading and manage risk responsibly.
Penunjuk Pine Script®
oleh Thebitcoin37
J12Matic Builder by galgoomA flexible Renko/tick strategy that lets you choose between two entry engines (Multi-Source 3-way or QBand+Moneyball), with a unified trailing/TP exit engine, NY-time trading windows with auto-flatten, daily profit/loss and trade-count limits (HALT mode), and clean webhook routing using {{strategy.order.alert_message}}. Highlights Two entry engines Multi-Source (3): up to three long/short sources with Single / Dual / Triple logic and optional lookback. QBand + Moneyball: Gate → Trigger workflow with timing windows, OR/AND trigger modes, per-window caps, optional same-bar fire. Unified exit engine: Trailing by Bricks or Ticks, plus optional static TP/SL. Session control (NY time): Evening / Overnight / NY Session windows; auto-flatten at end of any enabled window. Day controls: Profit/Loss (USD) and Trade-count limits. When hit, strategy HALTS new entries, shows an on-chart label/background. Alert routing designed for webhooks: Every order sets alert_message= so you can run alerts with: Condition: this strategy Notify on: Order fills only Message: {{strategy.order.alert_message}} Default JSONs or Custom payloads: If a Custom field is blank, a sensible default JSON is sent. Fill a field to override. How to set up alerts (the 15-second version) Create a TradingView alert with this strategy as Condition. Notify on: Order fills only. Message: {{strategy.order.alert_message}} (exactly). If you want your own payloads, paste them into Inputs → 08) Custom Alert Payloads. Leave blank → the strategy sends a default JSON. Fill in → your text is sent as-is. Note: Anything you type into the alert dialog’s Message box is ignored except the {{strategy.order.alert_message}} token, which forwards the payload supplied by the strategy at order time. Publishing notes / best practices Renko users: Make sure “Renko Brick Size” in Inputs matches your chart’s brick size exactly. Ticks vs Bricks: Exit distances switch instantly when you toggle Exit Units. Same-bar flips: If enabled, a new opposite signal will first close the open trade (with its exit payload), then enter the new side. HALT mode: When day profit/loss limit or trade-count limit triggers, new entries are blocked for the rest of the session day. You’ll see a label and a soft background tint. Session end flatten: Auto-closes positions at window ends; these exits use the “End of Session Window Exit” payload. Bar magnifier: Strategy is configured for on-close execution; you can enable Bar Magnifier in Properties if needed. Default JSONs (used when a Custom field is empty) Open: {"event":"open","side":"long|short","symbol":""} Close: {"event":"close","side":"long|short|flat","reason":"tp|sl|flip|session|limit_profit|limit_loss","symbol":""} You can paste any text/JSON into the Custom fields; it will be forwarded as-is when that event occurs. Input sections — user guide 01) Entries & Signals Entry Logic: Choose Multi-Source (3) or QBand + Moneyball (pick one). Enable Long/Short Signals: Master on/off switches for entering long/short. Flip on opposite signal: If enabled, a new opposite signal will close the current position first, then open the other side. Signal Logic (Multi-Source): Single: any 1 of the 3 sources > 0 Dual: Source1 AND Source2 > 0 Triple (default): 1 AND 2 AND 3 > 0 Long/Short Signal Sources 1–3: Provide up to three series (often indicators). A positive value (> 0) is treated as a “pulse”. Use Lookback: Keeps a source “true” for N bars after it pulses (helps catch late triggers). Long/Short Lookback (bars): How many bars to remember that pulse. 01b) QBands + Moneyball (Gate -> Trigger) Allow same-bar Gate->Trigger: If ON, a trigger can fire on the same bar as the gate pulse. Trigger must fire within N bars after Gate: Size of the gate window (in bars). Max signals per window (0 = unlimited): Cap the number of entries allowed while a gate window is open. Buy/Sell Source 1 – Gate: Gate pulse sources that open the buy/sell window (often a regime/zone, e.g., QBands bull/bear). Trigger Pulse Mode (Buy/Sell): How to detect a trigger pulse from the trigger sources (Change / Appear / Rise>0 / Fall<0). Trigger A/B sources + Extend Bars: Primary/secondary triggers plus optional extension to persist their pulse for N bars. Trigger Mode: Pick S2 only, S3 only, S2 OR S3, or S2 AND S3. AND mode remembers both pulses inside the window before firing. 02) Exit Units (Trailing/TP) Exit Units: Choose Bricks (Renko) or Ticks. All distances below switch accordingly. 03) Tick-based Trailing / Stops (active when Exit Units = Ticks) Initial SL (ticks): Starting stop distance from entry. Start Trailing After (ticks): Start trailing once price moves this far in your favor. Trailing Distance (ticks): Offset of the trailing stop from peak/trough once trailing begins. Take Profit (ticks): Optional static TP distance. Stop Loss (ticks): Optional static SL distance (overrides trailing if enabled). 04) Brick-based Trailing / Stops (active when Exit Units = Bricks) Renko Brick Size: Must match your chart’s brick size. Initial SL / Start Trailing After / Trailing Distance (bricks): Same definitions as tick mode, measured in bricks. Take Profit / Stop Loss (bricks): Optional static distances. 05) TP / SL Switch Enable Static Take Profit: If ON, closes the trade at the fixed TP distance. Enable Static Stop Loss (Overrides Trailing): If ON, trailing is disabled and a fixed SL is used. 06) Trading Windows (NY time) Use Trading Windows: Master toggle for all windows. Evening / Overnight / NY Session: Define each session in NY time. Flatten at End of : Auto-close any open position when a window ends (sends the Session Exit payload). 07) Day Controls & Limits Enable Profit Limits / Profit Limit (Dollars): When daily net PnL ≥ limit → auto-flatten and HALT. Enable Loss Limits / Loss Limit (Dollars): When daily net PnL ≤ −limit → auto-flatten and HALT. Enable Trade Count Limits / Number of Trades Allowed: After N entries, HALT new entries (does not auto-flatten). On-chart HUD: A label and soft background tint appear when HALTED; a compact status table shows Day PnL, trade count, and mode. 08) Custom Alert Payloads (used as strategy.order.alert_message) Long/Short Entry: Payload sent on entries (if blank, a default open JSON is sent). Regular Long/Short Exit: Payload sent on closes from SL/TP/flip (if blank, a default close JSON is sent). End of Session Window Exit: Payload sent when any enabled window ends and positions are flattened. Profit/Loss/Trade Limit Close: Payload sent when daily profit/loss limit causes auto-flatten. Tip: Any tokens you include here are forwarded “as is”. If your downstream expects variables, do the substitution on the receiver side. Known limitations No bracket orders from Pine: This strategy doesn’t create OCO/attached brackets on the broker; it simulates exits with strategy logic and forwards your payloads for external automation. alert_message is per order only: Alerts fire on order events. General status pings aren’t sent unless you wire a separate indicator/alert. Renko specifics: Backtests on synthetic Renko can differ from live execution. Always forward-test on your instrument and settings. Quick checklist before you publish ✅ Brick size in Inputs matches your Renko chart ✅ Exit Units set to Bricks or Ticks as you intend ✅ Day limits/Windows toggled as you want ✅ Custom payloads filled (or leave blank to use defaults) ✅ Your alert uses Order fills only + {{strategy.order.alert_message}}
Strategi Pine Script®
oleh galgoom
HSM KILLZONE//@version=5 indicator('HSM KILLZONE', 'HSM KILLZONE', overlay=true, max_bars_back=500, explicit_plot_zorder=true) import boitoki/AwesomeColor/4 as ac import boitoki/Utilities/3 as util /////////////// // Groups /////////////// g0 = 'GENERAL' g1_01 = '♯1 SESSION' g1_02 = '♯2 SESSION' g1_03 = '♯3 SESSION' g1_04 = '♯4 SESSION' g4 = 'BOX' g6 = 'LABELS' g5 = 'OPENING RANGE' g7 = 'FIBONACCI LEVELS' g8 = 'OPTIONS' g11 = 'CANDLE' g10 = 'Alerts visualized' /////////////// // Defined /////////////// max_bars = 500 option_yes = 'Yes' option_no = '× No' option_extend1 = 'Yes' option_hide = '× Hide' option_border_style1 = '────' option_border_style2 = '- - - - - -' option_border_style3 = '•••••••••' option_chart_x = '× No' option_chart_1 = 'Bar color' option_chart_2 = 'Candles' fmt_price = '{0,number,#.#####}' fmt_pips = '{0,number,#.#}' icon_separator = ' • ' color_none = color.new(color.black, 100) color_text = color.new(color.white, 0) /////////////// // Functions /////////////// f_get_time_by_bar(bar_count) => timeframe.multiplier * bar_count * 60 * 1000 f_border_style (_style) => switch _style option_border_style1 => line.style_solid option_border_style2 => line.style_dashed option_border_style3 => line.style_dotted => _style f_get_period (_session, _start, _lookback) => result = math.max(_start, 1) for i = result to _lookback if na(_session ) and _session result := i+1 break result f_get_label_position (_y, _side) => switch _y 'top' => _side == 'outside' ? label.style_label_lower_left : label.style_label_upper_left 'bottom' => _side == 'outside' ? label.style_label_upper_left : label.style_label_lower_left f_get_started (_session) => na(_session ) and _session f_get_ended (_session) => na(_session) and _session f_message_limit_bars (_v) => '⚠️ This box\'s right position exceeds 500 bars(' + str.tostring(_v) + '). This box is not displayed correctly.' f_set_line_x1 (_line, _x) => if (line.get_x1(_line) != _x) line.set_x1(_line, _x) f_set_line_x2 (_line, _x) => if (line.get_x2(_line) != _x) line.set_x2(_line, _x) f_set_box_right (_box, _x) => if box.get_right(_box) != _x box.set_right(_box, _x) /////////////// // Inputs /////////////// // Timezone i_tz = input.string('GMT-4', title='Timezone', options= , tooltip='e.g. \'America/New_York\', \'Asia/Tokyo\', \'GMT-4\', \'GMT+9\'...', group=g0) i_history_period = input.int(10, 'History', minval=0, group=g0) i_show = i_history_period > 0 i_lookback = 12 * 60 // Sessions i_show_sess1 = input.bool(true, 'Session 1  ', group=g1_01, inline='session1_1') and i_show i_sess1_label = input.string('New York AM', '', group=g1_01, inline='session1_1') i_sess1_color = input.color(#0a0a0a, '', group=g1_01, inline='session1_1') i_sess1_barcolor1 = input.color(#0a0a0a, '•', group=g1_01, inline='session1_1') i_sess1_barcolor2 = input.color(#0a0a0a, '', group=g1_01, inline='session1_1') i_sess1 = input.session('0700-1100', 'Time', group=g1_01) i_sess1_extend = input.string(option_no, 'Extend', options= , group=g1_01) i_sess1_fib = input.string(option_no, 'Fibonacci levels', group=g1_01, options= ) != option_no i_sess1_op = input.string(option_no, 'Opening range', group=g1_01, options= ) != option_no and i_show i_sess1_chart = input.string(option_chart_x, 'Bar', options= , group=g1_01) i_sess1_barcolor = i_sess1_chart == option_chart_1 i_sess1_plotcandle = i_sess1_chart == option_chart_2 i_show_sess2 = input.bool(true, 'Session 2  ', group=g1_02, inline='session2_1') and i_show i_sess2_label = input.string('New York PM', '', group=g1_02, inline='session2_1') i_sess2_color = input.color(#0a0a0a, '', group=g1_02, inline='session2_1') i_sess2_barcolor1 = input.color(#0a0a0a, '•', group=g1_02, inline='session2_1') i_sess2_barcolor2 = input.color(#0a0a0a, '', group=g1_02, inline='session2_1') i_sess2 = input.session('1300-1600', 'Time', group=g1_02) i_sess2_extend = input.string(option_no, 'Extend', options= , group=g1_02) i_sess2_fib = input.string(option_no, 'Fibonacci levels', group=g1_02, options= ) != option_no i_sess2_op = input.string(option_no, 'Opening range', group=g1_02, options= ) != option_no and i_show i_sess2_chart = input.string(option_chart_x, 'Bar', options= , group=g1_02) i_sess2_barcolor = i_sess2_chart == option_chart_1 i_sess2_plotcandle = i_sess2_chart == option_chart_2 i_show_sess3 = input.bool(true, 'Session 3  ', group=g1_03, inline='session3_1') and i_show i_sess3_label = input.string('Asian Sesh', '', group=g1_03, inline='session3_1') i_sess3_color = input.color(#0a0a0a, '', group=g1_03, inline='session3_1') i_sess3_barcolor1 = input.color(#0a0a0a, '•', group=g1_03, inline='session3_1') i_sess3_barcolor2 = input.color(#0a0a0a, '', group=g1_03, inline='session3_1') i_sess3 = input.session('2000-0000', 'Time', group=g1_03) i_sess3_extend = input.string(option_no, 'Extend', options= , group=g1_03) i_sess3_fib = input.string(option_no, 'Fibonacci levels', group=g1_03, options= ) != option_no i_sess3_op = input.string(option_no, 'Opening range', group=g1_03, options= ) != option_no and i_show i_sess3_chart = input.string(option_chart_x, 'Bar', options= , group=g1_03) i_sess3_barcolor = i_sess3_chart == option_chart_1 i_sess3_plotcandle = i_sess3_chart == option_chart_2 i_show_sess4 = input.bool(true, 'Session 4  ', group=g1_04, inline='session4_1') and i_show i_sess4_label = input.string('London', '', group=g1_04, inline='session4_1') i_sess4_color = input.color(#0a0a0a, '', group=g1_04, inline='session4_1') i_sess4_barcolor1 = input.color(#0a0a0a, '•', group=g1_04, inline='session4_1') i_sess4_barcolor2 = input.color(#0a0a0a, '', group=g1_04, inline='session4_1') i_sess4 = input.session('0200-0500', 'Time', group=g1_04) i_sess4_extend = input.string(option_no, 'Extend', options= , group=g1_04) i_sess4_fib = input.string(option_no, 'Fibonacci levels', group=g1_04, options= ) != option_no i_sess4_op = input.string(option_no, 'Opening range', group=g1_04, options= ) != option_no and i_show i_sess4_chart = input.string(option_chart_x, 'Bar', options= , group=g1_04) i_sess4_barcolor = i_sess4_chart == option_chart_1 i_sess4_plotcandle = i_sess4_chart == option_chart_2 // Show & Styles i_sess_box_style = input.string('Box', 'Style', options= , group=g4) i_sess_border_style = f_border_style(input.string(option_border_style2, 'Line style', options= , group=g4)) i_sess_border_width = input.int(1, 'Thickness', minval=0, group=g4) i_sess_bgopacity = input.int(94, 'Transp', minval=0, maxval=100, step=1, group=g4, tooltip='Setting the 100 is no background color') // Candle option_candle_body = 'OC' option_candle_wick = 'OHLC' i_candle = input.string(option_hide, 'Display', options= , group=g11) i_candle_border_width = input.int(2, 'Thickness', minval=0, group=g11) i_show_candle = (i_candle != option_hide) and (i_candle_border_width > 0) i_show_candle_wick = i_candle == option_candle_wick option_candle_color1 = 'Session\'s' option_candle_color2 = 'Red • Green' i_candle_color = input.string(option_candle_color2, 'Color ', options= , group=g11, inline='candle_color') i_candle_color_g = input.color(#A6E22E, '', group=g11, inline='candle_color') i_candle_color_r = input.color(#F92672, '', group=g11, inline='candle_color') // Labels i_label_show = input.bool(true, 'Labels', inline='label_show', group=g6) and i_show i_label_size = str.lower(input.string('Small', '', options= , inline='label_show', group=g6)) i_label_position_y = str.lower(input.string('Top', '', options= , inline='label_show', group=g6)) i_label_position_s = str.lower(input.string('Outside', '', options= , inline='label_show', group=g6)) i_label_position = f_get_label_position(i_label_position_y, i_label_position_s) i_label_format_name = input.bool(true, 'Name', inline='label_format', group=g6) i_label_format_day = input.bool(false, 'Day', inline='label_format', group=g6) i_label_format_price = input.bool(false, 'Price', inline='label_format', group=g6) i_label_format_pips = input.bool(false, 'Pips', inline='label_format', group=g6) // Fibonacci levels i_f_linestyle = f_border_style(input.string(option_border_style1, title="Style", options= , group=g7)) i_f_linewidth = input.int(1, title="Thickness", minval=1, group=g7) // Opening range i_o_minutes = input.int(15, title='Periods (minutes)', minval=1, step=1, group=g5) i_o_minutes := math.max(i_o_minutes, timeframe.multiplier + 1) i_o_transp = input.int(88, title='Transp', minval=0, maxval=100, step=1, group=g5) // Alerts i_alert1_show = input.bool(false, 'Alerts - Sessions stard/end', group=g10) i_alert2_show = input.bool(false, 'Alerts - Opening range breakouts', group=g10) i_alert3_show = input.bool(false, 'Alerts - Price crossed session\'s High/Low after session closed', group=g10) // ------------------------ // Drawing labels // ------------------------ f_render_label (_show, _session, _is_started, _color, _top, _bottom, _text, _labels) => var label my_label = na var int start_time = na v_position_y = (i_label_position_y == 'top') ? _top : _bottom v_label = array.new_string() v_chg = _top - _bottom if _is_started start_time := time if i_label_format_name and not na(_text) array.push(v_label, _text) if i_label_format_day array.push(v_label, util.get_day(dayofweek(start_time, i_tz))) if i_label_format_price array.push(v_label, str.format(fmt_price, v_chg)) if i_label_format_pips array.push(v_label, str.format(fmt_pips, util.toPips(v_chg)) + ' pips') if _show if _is_started my_label := label.new(bar_index, v_position_y, array.join(v_label, icon_separator), textcolor=_color, color=color_none, size=i_label_size, style=i_label_position) array.push(_labels, my_label) util.clear_labels(_labels, i_history_period) else if _session label.set_y(my_label, v_position_y) label.set_text(my_label, array.join(v_label, icon_separator)) // ------------------------ // Drawing Fibonacci levels // ------------------------ f_render_fibonacci (_show, _session, _is_started, _x1, _x2, _color, _top, _bottom, _level, _width, _style, _is_extend, _lines) => var line my_line = na if _show y = (_top - _bottom) * _level + _bottom if _is_started my_line := line.new(_x1, y, _x2, y, width=_width, color=color.new(_color, 30), style=_style) array.push(_lines, my_line) if _is_extend line.set_extend(my_line, extend.right) else if _session line.set_y1(my_line, y) line.set_y2(my_line, y) f_set_line_x2(my_line, _x2) // ------------------------ // Drawing Opening range // ------------------------ f_render_oprange (_show, _session, _is_started, _x1, _x2, _color, _max, _is_extend, _boxes) => var int start_time = na var box my_box = na top = ta.highest(high, _max) bottom = ta.lowest(low, _max) is_crossover = ta.crossover(close, box.get_top(my_box)) is_crossunder = ta.crossunder(close, box.get_bottom(my_box)) if _show if _is_started util.clear_boxes(_boxes, math.max(0, i_history_period - 1)) start_time := time my_box := na else if _session time_op = start_time + (i_o_minutes * 60 * 1000) time_op_delay = time_op - f_get_time_by_bar(1) if time <= time_op and time > time_op_delay my_box := box.new(_x1, top, _x2, bottom, border_width=0, bgcolor=color.new(_color, i_o_transp)) array.push(_boxes, my_box) if _is_extend box.set_extend(my_box, extend.right) my_box else f_set_box_right(my_box, _x2) if is_crossover alert('Price crossed over the opening range', alert.freq_once_per_bar) if i_alert2_show label.new(bar_index, box.get_top(my_box), "×", color=color.blue, textcolor=ac.tradingview('blue'), style=label.style_none, size=size.large) if is_crossunder alert('Price crossed under the opening range', alert.freq_once_per_bar) if i_alert2_show label.new(bar_index, box.get_bottom(my_box), "×", color=color.red, textcolor=ac.tradingview('red'), style=label.style_none, size=size.large) my_box // ------------------------ // Drawing candle // ------------------------ f_render_candle (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _open, _x1, _x2, _boxes, _lines) => var box body = na var line wick1 = na var line wick2 = na border_width = i_candle_border_width cx = math.round(math.avg(_x2, _x1)) - math.round(border_width / 2) body_color = i_candle_color == option_candle_color2 ? close > _open ? i_candle_color_g : i_candle_color_r : _color if _show if _is_started body := box.new(_x1, _top, _x2, _bottom, body_color, border_width, line.style_solid, bgcolor=color.new(color.black, 100)) wick1 := i_show_candle_wick ? line.new(cx, _top, cx, _top, color=_color, width=border_width, style=line.style_solid) : na wick2 := i_show_candle_wick ? line.new(cx, _bottom, cx, _bottom, color=_color, width=border_width, style=line.style_solid) : na array.push(_boxes, body) array.push(_lines, wick1) array.push(_lines, wick2) util.clear_boxes(_boxes, i_history_period) util.clear_lines(_lines, i_history_period * 2) else if _session top = math.max(_open, close) bottom = math.min(_open, close) box.set_top(body, top) box.set_bottom(body, bottom) box.set_right(body, _x2) box.set_border_color(body, body_color) line.set_y1(wick1, _top) line.set_y2(wick1, top) f_set_line_x1(wick1, cx) f_set_line_x2(wick1, cx) line.set_color(wick1, body_color) line.set_y1(wick2, _bottom) line.set_y2(wick2, bottom) f_set_line_x1(wick2, cx) f_set_line_x2(wick2, cx) line.set_color(wick2, body_color) else if _is_ended box.set_right(body, bar_index) // ------------------------ // Rendering limit message // ------------------------ f_render_limitmessage (_show, _session, _is_started, _is_ended, _x, _y, _rightbars) => var label my_note = na if _show if _is_started if _rightbars > max_bars my_note := label.new(_x, _y, f_message_limit_bars(_rightbars), style=label.style_label_upper_left, color=color.yellow, textalign=text.align_left, yloc=yloc.price) else if _session if _rightbars > max_bars label.set_y(my_note, _y) label.set_text(my_note, f_message_limit_bars(_rightbars)) else label.delete(my_note) else if _is_ended label.delete(my_note) true // Rendering session // f_render_sessionrange (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _lines) => var line above_line = na var line below_line = na if _show if _is_started above_line := line.new(_x1, _top, _x2, _top, width=i_sess_border_width, style=i_sess_border_style, color=_color) below_line := line.new(_x1, _bottom, _x2, _bottom, width=i_sess_border_width, style=i_sess_border_style, color=_color) linefill.new(above_line, below_line, color.new(_color, i_sess_bgopacity)) array.push(_lines, above_line) array.push(_lines, below_line) util.clear_lines(_lines, i_history_period * 2) if _is_extend line.set_extend(above_line, extend.right) line.set_extend(below_line, extend.right) else if _session line.set_y1(above_line, _top) line.set_y2(above_line, _top) line.set_x2(above_line, _x2) line.set_y1(below_line, _bottom) line.set_y2(below_line, _bottom) line.set_x2(below_line, _x2) true else if _is_ended true true // ------------------------ // Rendering session box // ------------------------ f_render_session (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _boxes) => var box my_box = na if _show if _is_started my_box := box.new(_x1, _top, _x2, _bottom, _color, i_sess_border_width, i_sess_border_style, bgcolor=color.new(_color, i_sess_bgopacity)) array.push(_boxes, my_box) util.clear_boxes(_boxes, i_history_period) if _is_extend box.set_extend(my_box, extend.right) else if _session box.set_top(my_box, _top) box.set_bottom(my_box, _bottom) f_set_box_right(my_box, _x2) else if _is_ended box.set_right(my_box, bar_index) my_box // ------------------------ // Drawing market // ------------------------ f_render_main (_show, _session, _is_started, _is_ended, _color, _top, _bottom) => var box my_box = na var label my_note = na var x1 = 0 var x2 = 0 var session_open = 0.0 var session_high = 0.0 var session_low = 0.0 x0_1 = ta.valuewhen(na(_session ) and _session, bar_index, 1) x0_2 = ta.valuewhen(na(_session) and _session , bar_index, 0) x0_d = math.abs(x0_2 - x0_1) limit_bars = max_bars rightbars = x0_d if _show if _is_started x1 := bar_index x2 := bar_index + (math.min(x0_d, limit_bars)) session_open := open session_high := _top session_low := _bottom else if _session true_x2 = x1 + x0_d rightbars := true_x2 - bar_index limit_bars := bar_index + max_bars x2 := math.min(true_x2, limit_bars) session_high := _top session_low := _bottom else if _is_ended session_open := na // ------------------------ // Drawing // ------------------------ draw (_show, _session, _color, _label, _extend, _show_fib, _show_op, _lookback, _boxes_session, _lines_session, _boxes_candle_body, _lines_candle_wick, _boxes_op, _lines_fib, _labels) => max = f_get_period(_session, 1, _lookback) top = ta.highest(high, max) bottom = ta.lowest(low, max) is_started = f_get_started(_session) is_ended = f_get_ended(_session) is_extend = _extend != option_no = f_render_main(_show, _session, is_started, is_ended, _color, top, bottom) if i_sess_box_style == 'Box' f_render_session(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _boxes_session) if i_sess_box_style == 'Sandwich' f_render_sessionrange(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _lines_session) if i_show_candle f_render_candle(_show, _session, is_started, is_ended, _color, top, bottom, _open, x1, x2, _boxes_candle_body, _lines_candle_wick) if i_label_show f_render_label(_show, _session, is_started, _color, top, bottom, _label, _labels) if _show_op f_render_oprange(_show, _session, is_started, x1, x2, _color, max, is_extend, _boxes_op) if _show_fib f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.500, 2, line.style_solid, is_extend, _lines_fib) f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.628, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib) f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.382, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib) util.clear_lines(_lines_fib, i_history_period * 3) f_render_limitmessage(_show, _session, is_started, is_ended, x1, bottom, _rightbars) /////////////////// // Calculating /////////////////// string tz = (i_tz == option_no or i_tz == '') ? na : i_tz int sess1 = time(timeframe.period, i_sess1, tz) int sess2 = time(timeframe.period, i_sess2, tz) int sess3 = time(timeframe.period, i_sess3, tz) int sess4 = time(timeframe.period, i_sess4, tz) /////////////////// // Plotting /////////////////// var sess1_box = array.new() var sess2_box = array.new() var sess3_box = array.new() var sess4_box = array.new() var sess1_line = array.new() var sess2_line = array.new() var sess3_line = array.new() var sess4_line = array.new() var sess1_op = array.new() var sess2_op = array.new() var sess3_op = array.new() var sess4_op = array.new() var sess1_fib = array.new() var sess2_fib = array.new() var sess3_fib = array.new() var sess4_fib = array.new() var sess1_candle_body = array.new() var sess2_candle_body = array.new() var sess3_candle_body = array.new() var sess4_candle_body = array.new() var sess1_candle_wick = array.new() var sess2_candle_wick = array.new() var sess3_candle_wick = array.new() var sess4_candle_wick = array.new() var sess1_labels = array.new() var sess2_labels = array.new() var sess3_labels = array.new() var sess4_labels = array.new() = draw(i_show_sess1, sess1, i_sess1_color, i_sess1_label, i_sess1_extend, i_sess1_fib, i_sess1_op, i_lookback, sess1_box, sess1_line, sess1_candle_body, sess1_candle_wick, sess1_op, sess1_fib, sess1_labels) = draw(i_show_sess2, sess2, i_sess2_color, i_sess2_label, i_sess2_extend, i_sess2_fib, i_sess2_op, i_lookback, sess2_box, sess2_line, sess2_candle_body, sess2_candle_wick, sess2_op, sess2_fib, sess2_labels) = draw(i_show_sess3, sess3, i_sess3_color, i_sess3_label, i_sess3_extend, i_sess3_fib, i_sess3_op, i_lookback, sess3_box, sess3_line, sess3_candle_body, sess3_candle_wick, sess3_op, sess3_fib, sess3_labels) = draw(i_show_sess4, sess4, i_sess4_color, i_sess4_label, i_sess4_extend, i_sess4_fib, i_sess4_op, i_lookback, sess4_box, sess4_line, sess4_candle_body, sess4_candle_wick, sess4_op, sess4_fib, sess4_labels) is_positive_bar = close > open color c_barcolor = na color c_plotcandle = na c_sess1_barcolor = (is_sess1) ? (is_positive_bar ? i_sess1_barcolor1 : i_sess1_barcolor2) : na c_sess2_barcolor = (is_sess2) ? (is_positive_bar ? i_sess2_barcolor1 : i_sess2_barcolor2) : na c_sess3_barcolor = (is_sess3) ? (is_positive_bar ? i_sess3_barcolor1 : i_sess3_barcolor2) : na c_sess4_barcolor = (is_sess4) ? (is_positive_bar ? i_sess4_barcolor1 : i_sess4_barcolor2) : na if (i_sess1_chart != option_chart_x) and is_sess1 c_barcolor := i_sess1_barcolor ? c_sess1_barcolor : na c_plotcandle := i_sess1_plotcandle ? c_sess1_barcolor : na if (i_sess2_chart != option_chart_x) and is_sess2 c_barcolor := i_sess2_barcolor ? c_sess2_barcolor : na c_plotcandle := i_sess2_plotcandle ? c_sess2_barcolor : na if (i_sess3_chart != option_chart_x) and is_sess3 c_barcolor := i_sess3_barcolor ? c_sess3_barcolor : na c_plotcandle := i_sess3_plotcandle ? c_sess3_barcolor : na if (i_sess4_chart != option_chart_x) and is_sess4 c_barcolor := i_sess4_barcolor ? c_sess4_barcolor : na c_plotcandle := i_sess4_plotcandle ? c_sess4_barcolor : na barcolor(c_barcolor) plotcandle(open, high, low, close, color=is_positive_bar ? color_none : c_plotcandle, bordercolor=c_plotcandle, wickcolor=c_plotcandle) //////////////////// // Alerts //////////////////// // Session alerts sess1_started = is_sess1 and not is_sess1 , sess1_ended = not is_sess1 and is_sess1 sess2_started = is_sess2 and not is_sess2 , sess2_ended = not is_sess2 and is_sess2 sess3_started = is_sess3 and not is_sess3 , sess3_ended = not is_sess3 and is_sess3 sess4_started = is_sess4 and not is_sess4 , sess4_ended = not is_sess4 and is_sess4 alertcondition(sess1_started, 'Session #1 started') alertcondition(sess1_ended, 'Session #1 ended') alertcondition(sess2_started, 'Session #2 started') alertcondition(sess2_ended, 'Session #2 ended') alertcondition(sess3_started, 'Session #3 started') alertcondition(sess3_ended, 'Session #3 ended') alertcondition(sess4_started, 'Session #4 started') alertcondition(sess4_ended, 'Session #4 ended') alertcondition((not is_sess1) and ta.crossover(close, sess1_high), 'Session #1 High crossed (after session closed)') alertcondition((not is_sess1) and ta.crossunder(close, sess1_low), 'Session #1 Low crossed (after session closed)') alertcondition((not is_sess2) and ta.crossover(close, sess2_high), 'Session #2 High crossed (after session closed)') alertcondition((not is_sess2) and ta.crossunder(close, sess2_low), 'Session #2 Low crossed (after session closed)') alertcondition((not is_sess3) and ta.crossover(close, sess3_high), 'Session #3 High crossed (after session closed)') alertcondition((not is_sess3) and ta.crossunder(close, sess3_low), 'Session #3 Low crossed (after session closed)') alertcondition((not is_sess4) and ta.crossover(close, sess4_high), 'Session #4 High crossed (after session closed)') alertcondition((not is_sess4) and ta.crossunder(close, sess4_low), 'Session #4 Low crossed (after session closed)') // Alerts visualized if i_alert1_show if i_show_sess1 if sess1_started label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down) if sess1_ended label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down) if i_show_sess2 if sess2_started label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down) if sess2_ended label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down) if i_show_sess3 if sess3_started label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down) if sess3_ended label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down) if i_show_sess4 if sess4_started label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down) if sess4_ended label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down) plot(i_alert3_show ? sess1_high : na, 'sess1_high', style=plot.style_linebr, color=i_sess1_color) plot(i_alert3_show ? sess1_low : na, 'sess1_low' , style=plot.style_linebr, color=i_sess1_color, linewidth=2) plot(i_alert3_show ? sess2_high : na, 'sess2_high', style=plot.style_linebr, color=i_sess2_color) plot(i_alert3_show ? sess2_low : na, 'sess2_low' , style=plot.style_linebr, color=i_sess2_color, linewidth=2) plot(i_alert3_show ? sess3_high : na, 'sess3_high', style=plot.style_linebr, color=i_sess3_color) plot(i_alert3_show ? sess3_low : na, 'sess3_low' , style=plot.style_linebr, color=i_sess3_color, linewidth=2) plot(i_alert3_show ? sess4_high : na, 'sess4_high', style=plot.style_linebr, color=i_sess4_color) plot(i_alert3_show ? sess4_low : na, 'sess4_low' , style=plot.style_linebr, color=i_sess4_color, linewidth=2) plotshape(i_alert3_show and (not is_sess1) and ta.crossover(close, sess1_high) ? sess1_high : na, 'cross sess1_high', color=i_sess1_color, style=shape.triangleup, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess1) and ta.crossunder(close, sess1_low) ? sess1_low : na, 'cross sess1_low', color=i_sess1_color, style=shape.triangledown, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess2) and ta.crossover(close, sess2_high) ? sess2_high : na, 'cross sess2_high', color=i_sess2_color, style=shape.triangleup, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess2) and ta.crossunder(close, sess2_low) ? sess2_low : na, 'cross sess2_low', color=i_sess2_color, style=shape.triangledown, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess3) and ta.crossover(close, sess3_high) ? sess3_high : na, 'cross sess3_high', color=i_sess3_color, style=shape.triangleup, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess3) and ta.crossunder(close, sess3_low) ? sess3_low : na, 'cross sess3_low', color=i_sess3_color, style=shape.triangledown, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess4) and ta.crossover(close, sess4_high) ? sess4_high : na, 'cross sess4_high', color=i_sess4_color, style=shape.triangleup, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess4) and ta.crossunder(close, sess4_low) ? sess4_low : na, 'cross sess4_low', color=i_sess4_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
Penunjuk Pine Script®
oleh FbsouzaBjj
HSM MACROS//@version=5 indicator('HSM MACROS', 'HSM MACROS', overlay=true, max_bars_back=500, explicit_plot_zorder=true) import boitoki/AwesomeColor/4 as ac import boitoki/Utilities/3 as util /////////////// // Groups /////////////// g0 = 'GENERAL' g1_01 = '♯1 SESSION' g1_02 = '♯2 SESSION' g1_03 = '♯3 SESSION' g1_04 = '♯4 SESSION' g4 = 'BOX' g6 = 'LABELS' g5 = 'OPENING RANGE' g7 = 'FIBONACCI LEVELS' g8 = 'OPTIONS' g11 = 'CANDLE' g10 = 'Alerts visualized' /////////////// // Defined /////////////// max_bars = 500 option_yes = 'Yes' option_no = '× No' option_extend1 = 'Yes' option_hide = '× Hide' option_border_style1 = '────' option_border_style2 = '- - - - - -' option_border_style3 = '•••••••••' option_chart_x = '× No' option_chart_1 = 'Bar color' option_chart_2 = 'Candles' fmt_price = '{0,number,#.#####}' fmt_pips = '{0,number,#.#}' icon_separator = ' • ' color_none = color.new(color.black, 100) color_text = color.new(color.white, 0) /////////////// // Functions /////////////// f_get_time_by_bar(bar_count) => timeframe.multiplier * bar_count * 60 * 1000 f_border_style (_style) => switch _style option_border_style1 => line.style_solid option_border_style2 => line.style_dashed option_border_style3 => line.style_dotted => _style f_get_period (_session, _start, _lookback) => result = math.max(_start, 1) for i = result to _lookback if na(_session ) and _session result := i+1 break result f_get_label_position (_y, _side) => switch _y 'top' => _side == 'outside' ? label.style_label_lower_left : label.style_label_upper_left 'bottom' => _side == 'outside' ? label.style_label_upper_left : label.style_label_lower_left f_get_started (_session) => na(_session ) and _session f_get_ended (_session) => na(_session) and _session f_message_limit_bars (_v) => '⚠️ This box\'s right position exceeds 500 bars(' + str.tostring(_v) + '). This box is not displayed correctly.' f_set_line_x1 (_line, _x) => if (line.get_x1(_line) != _x) line.set_x1(_line, _x) f_set_line_x2 (_line, _x) => if (line.get_x2(_line) != _x) line.set_x2(_line, _x) f_set_box_right (_box, _x) => if box.get_right(_box) != _x box.set_right(_box, _x) /////////////// // Inputs /////////////// // Timezone i_tz = input.string('GMT-4', title='Timezone', options= , tooltip='e.g. \'America/New_York\', \'Asia/Tokyo\', \'GMT-4\', \'GMT+9\'...', group=g0) i_history_period = input.int(10, 'History', minval=0, group=g0) i_show = i_history_period > 0 i_lookback = 12 * 60 // Sessions i_show_sess1 = input.bool(true, 'Session 1  ', group=g1_01, inline='session1_1') and i_show i_sess1_label = input.string('MC1', '', group=g1_01, inline='session1_1') i_sess1_color = input.color(#0a0a0a, '', group=g1_01, inline='session1_1') i_sess1_barcolor1 = input.color(#0a0a0a, '•', group=g1_01, inline='session1_1') i_sess1_barcolor2 = input.color(#0a0a0a, '', group=g1_01, inline='session1_1') i_sess1 = input.session('0820-0830', 'Time', group=g1_01) i_sess1_extend = input.string(option_no, 'Extend', options= , group=g1_01) i_sess1_fib = input.string(option_no, 'Fibonacci levels', group=g1_01, options= ) != option_no i_sess1_op = input.string(option_no, 'Opening range', group=g1_01, options= ) != option_no and i_show i_sess1_chart = input.string(option_chart_x, 'Bar', options= , group=g1_01) i_sess1_barcolor = i_sess1_chart == option_chart_1 i_sess1_plotcandle = i_sess1_chart == option_chart_2 i_show_sess2 = input.bool(true, 'Session 2  ', group=g1_02, inline='session2_1') and i_show i_sess2_label = input.string('MC2', '', group=g1_02, inline='session2_1') i_sess2_color = input.color(#0a0a0a, '', group=g1_02, inline='session2_1') i_sess2_barcolor1 = input.color(#0a0a0a, '•', group=g1_02, inline='session2_1') i_sess2_barcolor2 = input.color(#0a0a0a, '', group=g1_02, inline='session2_1') i_sess2 = input.session('0920-0930', 'Time', group=g1_02) i_sess2_extend = input.string(option_no, 'Extend', options= , group=g1_02) i_sess2_fib = input.string(option_no, 'Fibonacci levels', group=g1_02, options= ) != option_no i_sess2_op = input.string(option_no, 'Opening range', group=g1_02, options= ) != option_no and i_show i_sess2_chart = input.string(option_chart_x, 'Bar', options= , group=g1_02) i_sess2_barcolor = i_sess2_chart == option_chart_1 i_sess2_plotcandle = i_sess2_chart == option_chart_2 i_show_sess3 = input.bool(true, 'Session 3  ', group=g1_03, inline='session3_1') and i_show i_sess3_label = input.string('MC3', '', group=g1_03, inline='session3_1') i_sess3_color = input.color(#0a0a0a, '', group=g1_03, inline='session3_1') i_sess3_barcolor1 = input.color(#0a0a0a, '•', group=g1_03, inline='session3_1') i_sess3_barcolor2 = input.color(#0a0a0a, '', group=g1_03, inline='session3_1') i_sess3 = input.session('0950-1010', 'Time', group=g1_03) i_sess3_extend = input.string(option_no, 'Extend', options= , group=g1_03) i_sess3_fib = input.string(option_no, 'Fibonacci levels', group=g1_03, options= ) != option_no i_sess3_op = input.string(option_no, 'Opening range', group=g1_03, options= ) != option_no and i_show i_sess3_chart = input.string(option_chart_x, 'Bar', options= , group=g1_03) i_sess3_barcolor = i_sess3_chart == option_chart_1 i_sess3_plotcandle = i_sess3_chart == option_chart_2 i_show_sess4 = input.bool(true, 'Session 4  ', group=g1_04, inline='session4_1') and i_show i_sess4_label = input.string('MC4', '', group=g1_04, inline='session4_1') i_sess4_color = input.color(#0a0a0a, '', group=g1_04, inline='session4_1') i_sess4_barcolor1 = input.color(#0a0a0a, '•', group=g1_04, inline='session4_1') i_sess4_barcolor2 = input.color(#0a0a0a, '', group=g1_04, inline='session4_1') i_sess4 = input.session('1050-1110', 'Time', group=g1_04) i_sess4_extend = input.string(option_no, 'Extend', options= , group=g1_04) i_sess4_fib = input.string(option_no, 'Fibonacci levels', group=g1_04, options= ) != option_no i_sess4_op = input.string(option_no, 'Opening range', group=g1_04, options= ) != option_no and i_show i_sess4_chart = input.string(option_chart_x, 'Bar', options= , group=g1_04) i_sess4_barcolor = i_sess4_chart == option_chart_1 i_sess4_plotcandle = i_sess4_chart == option_chart_2 // Show & Styles i_sess_box_style = input.string('Box', 'Style', options= , group=g4) i_sess_border_style = f_border_style(input.string(option_border_style2, 'Line style', options= , group=g4)) i_sess_border_width = input.int(1, 'Thickness', minval=0, group=g4) i_sess_bgopacity = input.int(94, 'Transp', minval=0, maxval=100, step=1, group=g4, tooltip='Setting the 100 is no background color') // Candle option_candle_body = 'OC' option_candle_wick = 'OHLC' i_candle = input.string(option_hide, 'Display', options= , group=g11) i_candle_border_width = input.int(2, 'Thickness', minval=0, group=g11) i_show_candle = (i_candle != option_hide) and (i_candle_border_width > 0) i_show_candle_wick = i_candle == option_candle_wick option_candle_color1 = 'Session\'s' option_candle_color2 = 'Red • Green' i_candle_color = input.string(option_candle_color2, 'Color ', options= , group=g11, inline='candle_color') i_candle_color_g = input.color(#A6E22E, '', group=g11, inline='candle_color') i_candle_color_r = input.color(#F92672, '', group=g11, inline='candle_color') // Labels i_label_show = input.bool(true, 'Labels', inline='label_show', group=g6) and i_show i_label_size = str.lower(input.string('Small', '', options= , inline='label_show', group=g6)) i_label_position_y = str.lower(input.string('Top', '', options= , inline='label_show', group=g6)) i_label_position_s = str.lower(input.string('Outside', '', options= , inline='label_show', group=g6)) i_label_position = f_get_label_position(i_label_position_y, i_label_position_s) i_label_format_name = input.bool(true, 'Name', inline='label_format', group=g6) i_label_format_day = input.bool(false, 'Day', inline='label_format', group=g6) i_label_format_price = input.bool(false, 'Price', inline='label_format', group=g6) i_label_format_pips = input.bool(false, 'Pips', inline='label_format', group=g6) // Fibonacci levels i_f_linestyle = f_border_style(input.string(option_border_style1, title="Style", options= , group=g7)) i_f_linewidth = input.int(1, title="Thickness", minval=1, group=g7) // Opening range i_o_minutes = input.int(15, title='Periods (minutes)', minval=1, step=1, group=g5) i_o_minutes := math.max(i_o_minutes, timeframe.multiplier + 1) i_o_transp = input.int(88, title='Transp', minval=0, maxval=100, step=1, group=g5) // Alerts i_alert1_show = input.bool(false, 'Alerts - Sessions stard/end', group=g10) i_alert2_show = input.bool(false, 'Alerts - Opening range breakouts', group=g10) i_alert3_show = input.bool(false, 'Alerts - Price crossed session\'s High/Low after session closed', group=g10) // ------------------------ // Drawing labels // ------------------------ f_render_label (_show, _session, _is_started, _color, _top, _bottom, _text, _labels) => var label my_label = na var int start_time = na v_position_y = (i_label_position_y == 'top') ? _top : _bottom v_label = array.new_string() v_chg = _top - _bottom if _is_started start_time := time if i_label_format_name and not na(_text) array.push(v_label, _text) if i_label_format_day array.push(v_label, util.get_day(dayofweek(start_time, i_tz))) if i_label_format_price array.push(v_label, str.format(fmt_price, v_chg)) if i_label_format_pips array.push(v_label, str.format(fmt_pips, util.toPips(v_chg)) + ' pips') if _show if _is_started my_label := label.new(bar_index, v_position_y, array.join(v_label, icon_separator), textcolor=_color, color=color_none, size=i_label_size, style=i_label_position) array.push(_labels, my_label) util.clear_labels(_labels, i_history_period) else if _session label.set_y(my_label, v_position_y) label.set_text(my_label, array.join(v_label, icon_separator)) // ------------------------ // Drawing Fibonacci levels // ------------------------ f_render_fibonacci (_show, _session, _is_started, _x1, _x2, _color, _top, _bottom, _level, _width, _style, _is_extend, _lines) => var line my_line = na if _show y = (_top - _bottom) * _level + _bottom if _is_started my_line := line.new(_x1, y, _x2, y, width=_width, color=color.new(_color, 30), style=_style) array.push(_lines, my_line) if _is_extend line.set_extend(my_line, extend.right) else if _session line.set_y1(my_line, y) line.set_y2(my_line, y) f_set_line_x2(my_line, _x2) // ------------------------ // Drawing Opening range // ------------------------ f_render_oprange (_show, _session, _is_started, _x1, _x2, _color, _max, _is_extend, _boxes) => var int start_time = na var box my_box = na top = ta.highest(high, _max) bottom = ta.lowest(low, _max) is_crossover = ta.crossover(close, box.get_top(my_box)) is_crossunder = ta.crossunder(close, box.get_bottom(my_box)) if _show if _is_started util.clear_boxes(_boxes, math.max(0, i_history_period - 1)) start_time := time my_box := na else if _session time_op = start_time + (i_o_minutes * 60 * 1000) time_op_delay = time_op - f_get_time_by_bar(1) if time <= time_op and time > time_op_delay my_box := box.new(_x1, top, _x2, bottom, border_width=0, bgcolor=color.new(_color, i_o_transp)) array.push(_boxes, my_box) if _is_extend box.set_extend(my_box, extend.right) my_box else f_set_box_right(my_box, _x2) if is_crossover alert('Price crossed over the opening range', alert.freq_once_per_bar) if i_alert2_show label.new(bar_index, box.get_top(my_box), "×", color=color.blue, textcolor=ac.tradingview('blue'), style=label.style_none, size=size.large) if is_crossunder alert('Price crossed under the opening range', alert.freq_once_per_bar) if i_alert2_show label.new(bar_index, box.get_bottom(my_box), "×", color=color.red, textcolor=ac.tradingview('red'), style=label.style_none, size=size.large) my_box // ------------------------ // Drawing candle // ------------------------ f_render_candle (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _open, _x1, _x2, _boxes, _lines) => var box body = na var line wick1 = na var line wick2 = na border_width = i_candle_border_width cx = math.round(math.avg(_x2, _x1)) - math.round(border_width / 2) body_color = i_candle_color == option_candle_color2 ? close > _open ? i_candle_color_g : i_candle_color_r : _color if _show if _is_started body := box.new(_x1, _top, _x2, _bottom, body_color, border_width, line.style_solid, bgcolor=color.new(color.black, 100)) wick1 := i_show_candle_wick ? line.new(cx, _top, cx, _top, color=_color, width=border_width, style=line.style_solid) : na wick2 := i_show_candle_wick ? line.new(cx, _bottom, cx, _bottom, color=_color, width=border_width, style=line.style_solid) : na array.push(_boxes, body) array.push(_lines, wick1) array.push(_lines, wick2) util.clear_boxes(_boxes, i_history_period) util.clear_lines(_lines, i_history_period * 2) else if _session top = math.max(_open, close) bottom = math.min(_open, close) box.set_top(body, top) box.set_bottom(body, bottom) box.set_right(body, _x2) box.set_border_color(body, body_color) line.set_y1(wick1, _top) line.set_y2(wick1, top) f_set_line_x1(wick1, cx) f_set_line_x2(wick1, cx) line.set_color(wick1, body_color) line.set_y1(wick2, _bottom) line.set_y2(wick2, bottom) f_set_line_x1(wick2, cx) f_set_line_x2(wick2, cx) line.set_color(wick2, body_color) else if _is_ended box.set_right(body, bar_index) // ------------------------ // Rendering limit message // ------------------------ f_render_limitmessage (_show, _session, _is_started, _is_ended, _x, _y, _rightbars) => var label my_note = na if _show if _is_started if _rightbars > max_bars my_note := label.new(_x, _y, f_message_limit_bars(_rightbars), style=label.style_label_upper_left, color=color.yellow, textalign=text.align_left, yloc=yloc.price) else if _session if _rightbars > max_bars label.set_y(my_note, _y) label.set_text(my_note, f_message_limit_bars(_rightbars)) else label.delete(my_note) else if _is_ended label.delete(my_note) true // Rendering session // f_render_sessionrange (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _lines) => var line above_line = na var line below_line = na if _show if _is_started above_line := line.new(_x1, _top, _x2, _top, width=i_sess_border_width, style=i_sess_border_style, color=_color) below_line := line.new(_x1, _bottom, _x2, _bottom, width=i_sess_border_width, style=i_sess_border_style, color=_color) linefill.new(above_line, below_line, color.new(_color, i_sess_bgopacity)) array.push(_lines, above_line) array.push(_lines, below_line) util.clear_lines(_lines, i_history_period * 2) if _is_extend line.set_extend(above_line, extend.right) line.set_extend(below_line, extend.right) else if _session line.set_y1(above_line, _top) line.set_y2(above_line, _top) line.set_x2(above_line, _x2) line.set_y1(below_line, _bottom) line.set_y2(below_line, _bottom) line.set_x2(below_line, _x2) true else if _is_ended true true // ------------------------ // Rendering session box // ------------------------ f_render_session (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _boxes) => var box my_box = na if _show if _is_started my_box := box.new(_x1, _top, _x2, _bottom, _color, i_sess_border_width, i_sess_border_style, bgcolor=color.new(_color, i_sess_bgopacity)) array.push(_boxes, my_box) util.clear_boxes(_boxes, i_history_period) if _is_extend box.set_extend(my_box, extend.right) else if _session box.set_top(my_box, _top) box.set_bottom(my_box, _bottom) f_set_box_right(my_box, _x2) else if _is_ended box.set_right(my_box, bar_index) my_box // ------------------------ // Drawing market // ------------------------ f_render_main (_show, _session, _is_started, _is_ended, _color, _top, _bottom) => var box my_box = na var label my_note = na var x1 = 0 var x2 = 0 var session_open = 0.0 var session_high = 0.0 var session_low = 0.0 x0_1 = ta.valuewhen(na(_session ) and _session, bar_index, 1) x0_2 = ta.valuewhen(na(_session) and _session , bar_index, 0) x0_d = math.abs(x0_2 - x0_1) limit_bars = max_bars rightbars = x0_d if _show if _is_started x1 := bar_index x2 := bar_index + (math.min(x0_d, limit_bars)) session_open := open session_high := _top session_low := _bottom else if _session true_x2 = x1 + x0_d rightbars := true_x2 - bar_index limit_bars := bar_index + max_bars x2 := math.min(true_x2, limit_bars) session_high := _top session_low := _bottom else if _is_ended session_open := na // ------------------------ // Drawing // ------------------------ draw (_show, _session, _color, _label, _extend, _show_fib, _show_op, _lookback, _boxes_session, _lines_session, _boxes_candle_body, _lines_candle_wick, _boxes_op, _lines_fib, _labels) => max = f_get_period(_session, 1, _lookback) top = ta.highest(high, max) bottom = ta.lowest(low, max) is_started = f_get_started(_session) is_ended = f_get_ended(_session) is_extend = _extend != option_no = f_render_main(_show, _session, is_started, is_ended, _color, top, bottom) if i_sess_box_style == 'Box' f_render_session(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _boxes_session) if i_sess_box_style == 'Sandwich' f_render_sessionrange(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _lines_session) if i_show_candle f_render_candle(_show, _session, is_started, is_ended, _color, top, bottom, _open, x1, x2, _boxes_candle_body, _lines_candle_wick) if i_label_show f_render_label(_show, _session, is_started, _color, top, bottom, _label, _labels) if _show_op f_render_oprange(_show, _session, is_started, x1, x2, _color, max, is_extend, _boxes_op) if _show_fib f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.500, 2, line.style_solid, is_extend, _lines_fib) f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.628, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib) f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.382, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib) util.clear_lines(_lines_fib, i_history_period * 3) f_render_limitmessage(_show, _session, is_started, is_ended, x1, bottom, _rightbars) /////////////////// // Calculating /////////////////// string tz = (i_tz == option_no or i_tz == '') ? na : i_tz int sess1 = time(timeframe.period, i_sess1, tz) int sess2 = time(timeframe.period, i_sess2, tz) int sess3 = time(timeframe.period, i_sess3, tz) int sess4 = time(timeframe.period, i_sess4, tz) /////////////////// // Plotting /////////////////// var sess1_box = array.new() var sess2_box = array.new() var sess3_box = array.new() var sess4_box = array.new() var sess1_line = array.new() var sess2_line = array.new() var sess3_line = array.new() var sess4_line = array.new() var sess1_op = array.new() var sess2_op = array.new() var sess3_op = array.new() var sess4_op = array.new() var sess1_fib = array.new() var sess2_fib = array.new() var sess3_fib = array.new() var sess4_fib = array.new() var sess1_candle_body = array.new() var sess2_candle_body = array.new() var sess3_candle_body = array.new() var sess4_candle_body = array.new() var sess1_candle_wick = array.new() var sess2_candle_wick = array.new() var sess3_candle_wick = array.new() var sess4_candle_wick = array.new() var sess1_labels = array.new() var sess2_labels = array.new() var sess3_labels = array.new() var sess4_labels = array.new() = draw(i_show_sess1, sess1, i_sess1_color, i_sess1_label, i_sess1_extend, i_sess1_fib, i_sess1_op, i_lookback, sess1_box, sess1_line, sess1_candle_body, sess1_candle_wick, sess1_op, sess1_fib, sess1_labels) = draw(i_show_sess2, sess2, i_sess2_color, i_sess2_label, i_sess2_extend, i_sess2_fib, i_sess2_op, i_lookback, sess2_box, sess2_line, sess2_candle_body, sess2_candle_wick, sess2_op, sess2_fib, sess2_labels) = draw(i_show_sess3, sess3, i_sess3_color, i_sess3_label, i_sess3_extend, i_sess3_fib, i_sess3_op, i_lookback, sess3_box, sess3_line, sess3_candle_body, sess3_candle_wick, sess3_op, sess3_fib, sess3_labels) = draw(i_show_sess4, sess4, i_sess4_color, i_sess4_label, i_sess4_extend, i_sess4_fib, i_sess4_op, i_lookback, sess4_box, sess4_line, sess4_candle_body, sess4_candle_wick, sess4_op, sess4_fib, sess4_labels) is_positive_bar = close > open color c_barcolor = na color c_plotcandle = na c_sess1_barcolor = (is_sess1) ? (is_positive_bar ? i_sess1_barcolor1 : i_sess1_barcolor2) : na c_sess2_barcolor = (is_sess2) ? (is_positive_bar ? i_sess2_barcolor1 : i_sess2_barcolor2) : na c_sess3_barcolor = (is_sess3) ? (is_positive_bar ? i_sess3_barcolor1 : i_sess3_barcolor2) : na c_sess4_barcolor = (is_sess4) ? (is_positive_bar ? i_sess4_barcolor1 : i_sess4_barcolor2) : na if (i_sess1_chart != option_chart_x) and is_sess1 c_barcolor := i_sess1_barcolor ? c_sess1_barcolor : na c_plotcandle := i_sess1_plotcandle ? c_sess1_barcolor : na if (i_sess2_chart != option_chart_x) and is_sess2 c_barcolor := i_sess2_barcolor ? c_sess2_barcolor : na c_plotcandle := i_sess2_plotcandle ? c_sess2_barcolor : na if (i_sess3_chart != option_chart_x) and is_sess3 c_barcolor := i_sess3_barcolor ? c_sess3_barcolor : na c_plotcandle := i_sess3_plotcandle ? c_sess3_barcolor : na if (i_sess4_chart != option_chart_x) and is_sess4 c_barcolor := i_sess4_barcolor ? c_sess4_barcolor : na c_plotcandle := i_sess4_plotcandle ? c_sess4_barcolor : na barcolor(c_barcolor) plotcandle(open, high, low, close, color=is_positive_bar ? color_none : c_plotcandle, bordercolor=c_plotcandle, wickcolor=c_plotcandle) //////////////////// // Alerts //////////////////// // Session alerts sess1_started = is_sess1 and not is_sess1 , sess1_ended = not is_sess1 and is_sess1 sess2_started = is_sess2 and not is_sess2 , sess2_ended = not is_sess2 and is_sess2 sess3_started = is_sess3 and not is_sess3 , sess3_ended = not is_sess3 and is_sess3 sess4_started = is_sess4 and not is_sess4 , sess4_ended = not is_sess4 and is_sess4 alertcondition(sess1_started, 'Session #1 started') alertcondition(sess1_ended, 'Session #1 ended') alertcondition(sess2_started, 'Session #2 started') alertcondition(sess2_ended, 'Session #2 ended') alertcondition(sess3_started, 'Session #3 started') alertcondition(sess3_ended, 'Session #3 ended') alertcondition(sess4_started, 'Session #4 started') alertcondition(sess4_ended, 'Session #4 ended') alertcondition((not is_sess1) and ta.crossover(close, sess1_high), 'Session #1 High crossed (after session closed)') alertcondition((not is_sess1) and ta.crossunder(close, sess1_low), 'Session #1 Low crossed (after session closed)') alertcondition((not is_sess2) and ta.crossover(close, sess2_high), 'Session #2 High crossed (after session closed)') alertcondition((not is_sess2) and ta.crossunder(close, sess2_low), 'Session #2 Low crossed (after session closed)') alertcondition((not is_sess3) and ta.crossover(close, sess3_high), 'Session #3 High crossed (after session closed)') alertcondition((not is_sess3) and ta.crossunder(close, sess3_low), 'Session #3 Low crossed (after session closed)') alertcondition((not is_sess4) and ta.crossover(close, sess4_high), 'Session #4 High crossed (after session closed)') alertcondition((not is_sess4) and ta.crossunder(close, sess4_low), 'Session #4 Low crossed (after session closed)') // Alerts visualized if i_alert1_show if i_show_sess1 if sess1_started label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down) if sess1_ended label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down) if i_show_sess2 if sess2_started label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down) if sess2_ended label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down) if i_show_sess3 if sess3_started label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down) if sess3_ended label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down) if i_show_sess4 if sess4_started label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down) if sess4_ended label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down) plot(i_alert3_show ? sess1_high : na, 'sess1_high', style=plot.style_linebr, color=i_sess1_color) plot(i_alert3_show ? sess1_low : na, 'sess1_low' , style=plot.style_linebr, color=i_sess1_color, linewidth=2) plot(i_alert3_show ? sess2_high : na, 'sess2_high', style=plot.style_linebr, color=i_sess2_color) plot(i_alert3_show ? sess2_low : na, 'sess2_low' , style=plot.style_linebr, color=i_sess2_color, linewidth=2) plot(i_alert3_show ? sess3_high : na, 'sess3_high', style=plot.style_linebr, color=i_sess3_color) plot(i_alert3_show ? sess3_low : na, 'sess3_low' , style=plot.style_linebr, color=i_sess3_color, linewidth=2) plot(i_alert3_show ? sess4_high : na, 'sess4_high', style=plot.style_linebr, color=i_sess4_color) plot(i_alert3_show ? sess4_low : na, 'sess4_low' , style=plot.style_linebr, color=i_sess4_color, linewidth=2) plotshape(i_alert3_show and (not is_sess1) and ta.crossover(close, sess1_high) ? sess1_high : na, 'cross sess1_high', color=i_sess1_color, style=shape.triangleup, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess1) and ta.crossunder(close, sess1_low) ? sess1_low : na, 'cross sess1_low', color=i_sess1_color, style=shape.triangledown, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess2) and ta.crossover(close, sess2_high) ? sess2_high : na, 'cross sess2_high', color=i_sess2_color, style=shape.triangleup, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess2) and ta.crossunder(close, sess2_low) ? sess2_low : na, 'cross sess2_low', color=i_sess2_color, style=shape.triangledown, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess3) and ta.crossover(close, sess3_high) ? sess3_high : na, 'cross sess3_high', color=i_sess3_color, style=shape.triangleup, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess3) and ta.crossunder(close, sess3_low) ? sess3_low : na, 'cross sess3_low', color=i_sess3_color, style=shape.triangledown, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess4) and ta.crossover(close, sess4_high) ? sess4_high : na, 'cross sess4_high', color=i_sess4_color, style=shape.triangleup, location=location.absolute, size=size.tiny) plotshape(i_alert3_show and (not is_sess4) and ta.crossunder(close, sess4_low) ? sess4_low : na, 'cross sess4_low', color=i_sess4_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
Penunjuk Pine Script®
oleh FbsouzaBjj