Mulakan

Cari dalam skrip untuk "bear"

Average Sentiment OscillatorDescription of this indicator from its author: Average Sentiment Oscillator Momentum oscillator of averaged bull/bear percentages. We suggest using it as a relatively accurate way to gauge the sentiment of a given period of candles, as a trend filter or for entry/exit signals. It’s a combination of two algorithms, both essentially the same but applied in a different way. The first one analyzes the bullish/bearishness of each bar using OHLC prices then averages all percentages in the period group of bars (eg. 10) to give the final % value. The second one treats the period group of bars as one bar and then determines the sentiment percentage with the OHLC points of the group. The first one is noisy but more accurate in respect to intra-bar sentiment, whereas the second gives a smoother result and adds more weight to the range of price movement. They can be used separately as Mode 1 and Mode 2 in the indicator settings, or combined as Mode 0. Original indicator idea from Benjamin Joshua Nash, converted from MT4 version Usage: The blue line is Bulls %, red line is Bears %. As they are both percentages of 100, they mirror each other. The higher line is the dominating sentiment. The lines crossing the 50% centreline mark the shift of power between bulls and bears, and this often provides a good entry or exit signal, i.e. if the blue line closes above 50% on the last bar, Buy or exit Sell, if the red line closes above 50% on the last bar, Sell or exit Buy. These entries are better when average volume is high. It's also possible to see the relative strength of the swings/trend, i.e. a blue peak is higher than the preceding red one. A clear divergence can be seen in the picture as the second bullish peak registers as a lower strength on the oscillator but moved higher on the price chart. By setting up levels at the 70% and 30% mark the oscillator can also be used for trading overbought/oversold levels similar to a Stochastic or RSI. As is the rule with most indicators, a smaller period gives more leading signals and a larger period gives less false signals.
Penunjuk Pine Script®
oleh KivancOzbilgic
49
Bar Balance [LucF]Bar Balance extracts the number of up, down and neutral intrabars contained in each chart bar, revealing information on the strength of price movement. It can display stacked columns representing raw up/down/neutral intrabar counts, or an up/down balance line which can be calculated and visualized in many different ways. WARNING: This is an analysis tool that works on historical bars only. It does not show any realtime information, and thus cannot be used to issue alerts or for automated trading. When realtime bars elapse, the indicator will require a browser refresh, a change to its Inputs or to the chart's timeframe/symbol to recalculate and display information on those elapsed bars. Once a trader understands this, the indicator can be used advantageously to make discretionary trading decisions. Traders used to work with my  Delta Volume Columns Pro  will feel right at home in this indicator's Inputs . It has lots of options, allowing it to be used in many different ways. If you value the bar balance information this indicator mines, I hope you will find the time required to master the use of Bar Balance well worth the investment. █  OVERVIEW The indicator has two modes: Columns and Line . Columns • In Columns mode you can display stacked Up/Down/Neutral columns. • The "Up" section represents the count of intrabars where `close > open`, "Down" where `close < open` and "Neutral" where `close = open`. • The Up section always appears above the centerline, the Down section below. The Neutral section overlaps the centerline, split halfway above and below it.  The Up and Down sections start where the Neutral section ends, when there is one. • The Up and Down sections can be colored independently using 7 different methods. • The signal line plotted in Line mode can also be displayed in Columns mode. Line • Displays a single balance line using a zero centerline. • A variable number of independent methods can be used to calculate the line (6), determine its color (5), and color the fill (5).  You can thus evaluate the state of 3 different components with this single line. • A "Divergence Levels" feature will use the line to automatically draw expanding levels on divergence events. Features available in both modes • The color of all components can be selected from 15 base colors, with 16 gradient levels used for each base color in the indicator's gradients. • A zero line can show a 6-state aggregate value of the three main volume balance modes. • The background can be colored using any of 5 different methods. • Chart bars can be colored using 5 different methods. • Divergence and large neutral count ratio events can be shown in either Columns or Line mode, calculated in one of 4 different methods. • Markers on 6 different conditions can be displayed. █  CONCEPTS Intrabar inspection Intrabar inspection means the indicator looks at lower timeframe bars ( intrabars ) making up a given chart bar to gather its information. If your chart is on a 1-hour timeframe and the intrabar resolution determined by the indicator is 5 minutes, then 12 intrabars will be analyzed for each chart bar and the count of up/down/neutral intrabars among those will be tallied. Bar Balances and calculation methods The indicator uses a variety of methods to evaluate bar balance and to derive other calculations from them: 1. Balance on Bar : Uses the relative importance of instant Up and Down counts on the bar. 2. Balance Averages : Uses the difference between the EMAs of Up and Down counts. 3. Balance Momentum : Starts by calculating, separately for both Up and Down counts, the difference between the same EMAs used in Balance Averages and an SMA of double the period used for the EMAs. These differences are then aggregated and finally, a bounded momentum of that aggregate is calculated using RSI. 4. Markers Bias : It sums the bull/bear occurrences of the four previous markers over a user-defined period (the default is 14). 5. Combined Balances : This is the aggregate of the instant bull/bear bias of the three main bar balances. 6. Dual Up/Down Averages : This is a display mode showing the EMA calculated for each of the Up and Down counts. Interpretation of neutral intrabars What do neutral intrabars mean? When price does not change during a bar, it can be because there is simply no interest in the market, or because of a perfect balance between buyers and sellers. The latter being more improbable, Bar Balance assumes that neutral bars reveal a lack of interest, which entails uncertainty. That is the reason why the option is provided to interpret ratios of neutral intrabars greater than 50% as divergences. It is also the rationale behind the option to dampen signal lines on the inverse ratio of neutral intrabars, so that zero intrabars do not affect the signal, and progressively larger proportions of neutral intrabars will reduce the signal's amplitude, as the balance calcs using the up/down counts lose significance. The impact of the dampening will vary with markets. Weaker markets such as cryptos will often contain greater numbers of neutral intrabars, so dampening the Line in that sector will have a greater impact than in more liquid markets. █  FEATURES 1 — Columns • While the size of the Up/Down columns always represents their respective importance on the bar, their coloring mode is independent. The default setup uses a standard coloring mode where the Up/Down columns over/under the zero line are always in the bull/bear color with a higher intensity for the winning side. Six other coloring modes allow you to pack more information in the columns. When choosing to color the top columns using a bull/bear gradient on Balance Averages, for example, you will end up with bull/bear colored tops. In order for the color of the bottom columns to continue to show the instant bar balance, you can then choose the "Up/Down Ratio on Bar — Dual Solid Colors" coloring mode to make those bars the color of the winning side for that bar. • Line mode shows only the line, but Columns mode allows displaying the line along with it. If the scale of the line is different than that of the scale of the columns, the line will often appear flat. Traders may find even a flat line useful as its bull/bear colors will be easily distinguishable. 2 — Line • The default setup for Line mode uses a calculation on "Balance Momentum", with a fill on the longer-term "Balance Averages" and a line color based on the "Markers Bias". With the background set on "Line vs Divergence Levels" and the zero line on the hard-coded "Combined Bar Balances", you have access to five distinct sources of information at a glance, to which you can add divergences, divergences levels and chart bar coloring. This provides powerful potential in displaying bar balance information. • When no columns are displayed, Line mode can show the full scale of whichever line you choose to calculate because the columns' scale no longer interferes with the line's scale. • Note that when "Balance on Bar" is selected, the Neutral count is also displayed as a ratio of the balance line. This is the only instance where the Neutral count is displayed in Line mode. • The "Dual Up/Down Averages" is an exception as it displays two lines: one average for the Up counts and another for the Down counts. This mode will be most useful when Columns are also displayed, as it provides a reference for the top and bottom columns. 3 — Zero Line The zero line can be colored using two methods, both based on the Combined Balances, i.e., the aggregate of the instant bull/bear bias of the three main bar balances. • In "Six-state Dual Color Gradient" mode, a dot appears on every bar. Its color reflects the bull/bear state of the Combined Balances, and the dot's brightness reflects the tally of balance biases. • In "Dual Solid Colors (All Bull/All Bear Only)" a dot only appears when all three balances are either bullish or bearish. The resulting pattern is identical to that of Marker 1. 4 — Divergences • Divergences are displayed as a small circle at the top of the scale. Four different types of divergence events can be detected. Divergences occur whenever the bull/bear bias of the method used diverges with the bar's price direction. • An option allows you to include in divergence events instances where the count of neutral intrabars exceeds 50% of the total intrabar count. • The divergence levels are dynamic levels that automatically build from the line's values on divergence events. On consecutive divergences, the levels will expand, creating a channel. This implementation of the divergence levels corresponds to my view that divergences indicate anomalies, hesitations, points of uncertainty if you will. It excludes any association of a pre-determined bullish/bearish bias to divergences. Accordingly, the levels merely take note of divergence events and mark those points in time with levels. Traders then have a reference point from which they can evaluate further movement. The bull/bear/neutral colors used to plot the levels are also congruent with this view in that they are determined by price's position relative to the levels, which is how I think divergences can be put to the most effective use. 5 — Background • The background can show a bull/bear gradient on four different calculations. You can adjust its brightness to make its visual importance proportional to how you use it in your analysis. 6 — Chart bars • Chart bars can be colored using five different methods. • You have the option of emptying the body of bars where volume does not increase, as does my TLD indicator, the idea behind this being that movement on bars where volume does not increase is less relevant. 7 — Intrabar Resolution You can choose between three modes. Two of them are automatic and one is manual:   a) Fast, Longer history, Auto-Steps (~12 intrabars) : Optimized for speed and deeper history. Uses an average minimum of 12 intrabars.   b) More Precise, Shorter History Auto-Steps (~24 intrabars) : Uses finer intrabar resolution. It is slower and provides less history. Uses an average minimum of 24 intrabars.   c) Fixed : Uses the fixed resolution of your choice. Auto-Steps calculations vary for 24/7 and conventional markets in order to achieve the proper target of minimum intrabars. You can choose to view the intrabar resolution currently used to calculate delta volume. It is the default. The proper selection of the intrabar resolution is important. It must achieve maximal granularity to produce precise results while not unduly slowing down calculations, or worse, causing runtime errors. 8 — Markers Six markers are available: 1. Combined Balances Agreement : All three Bar Balances are either bullish or bearish. 2. Up or Down % Agrees With Bar : An up marker will appear when the percentage of up intrabars in an up chart bar is greater than the specified percentage. Conditions mirror to down bars. 3. Divergence confirmations By Price : One of the four types of balance calculations can be used to detect divergences with price. Confirmations occur when the bar following the divergence confirms the balance bias. Note that the divergence events used here do not include neutral intrabar events. 4. Balance Transitions : Bull/bear transitions of the selected balance. 5. Markers Bias Transitions : Bull/bear transitions of the Markers Bias. 6. Divergence Confirmations By Line : Marks points where the line first breaches a divergence level. Markers appear when the condition is detected, without delay. Since nothing is plotted in realtime, markers do not appear on the realtime bar. 9 — Settings • Two modes can be selected to dampen the line on the ratio of neutral intrabars. • A distinct weight can be attributed to the count of the latter half of intrabars, on the assumption that later intrabars may be more important in determining the outcome of chart bars. • Allows control over the periods of the different moving averages used in calculations. • The default periods used for the various calculations define the following hierarchy from slow to fast:   Balance Averages: 50,   Balance Momentum: 20,   Dual Up/Down Averages: 20,   Marker Bias: 10. █  LIMITATIONS • This script uses a special characteristic of the `security()` function allowing the inspection of intrabars—which is not officially supported by TradingView. • The method used does not work on the realtime bar—only on historical bars. • The indicator only works on some chart resolutions: 3, 5, 10, 15 and 30 minutes, 1, 2, 4, 6, and 12 hours, 1 day, 1 week and 1 month. The script’s code can be modified to run on other resolutions, but chart resolutions must be divisible by the lower resolution used for intrabars and the stepping mechanism could require adaptation. • When using the "Line vs Divergence Levels — Dual Color Gradient" color mode to fill the line, background or chart bars, keep in mind that a line calculation mode must be defined for it to work, as it determines gradients on the movement of the line relative to divergence levels. If the line is hidden, it will not work. • When the difference between the chart’s resolution and the intrabar resolution is too great, runtime errors will occur. The Auto-Steps selection mechanisms should avoid this. • Alerts do not work reliably when `security()` is used at intrabar resolutions. Accordingly, no alerts are configured in the indicator. • The color model used in the indicator provides for fancy visuals that come at a price; when you change values in Inputs , it can take 20 seconds for the changes to materialize. Luckily, once your color setup is complete, the color model does not have a large performance impact, as in normal operation the `security()` calls will become the most important factor in determining response time. Also, once in a while a runtime error will occur when you change inputs. Just making another change will usually bring the indicator back up. █  RAMBLINGS Is this thing useful? I'll let you decide. Bar Balance acts somewhat like an X-Ray on bars. The intrabars it analyzes are no secret; one can simply change the chart's resolution to see the same intrabars the indicator uses. What the indicator brings to traders is the precise count of up/down/neutral intrabars and, more importantly, the calculations it derives from them to present the information in a way that can make it easier to use in trading decisions. How reliable is Bar Balance information? By the same token that an up bar does not guarantee that more up bars will follow, future price movements cannot be inferred from the mere count of up/down/neutral intrabars. Price movement during any chart bar for which, let's say, 12 intrabars are analyzed, could be due to only one of those intrabars. One can thus easily see how only relying on bar balance information could be very misleading. The rationale behind Bar Balance is that when the information mined for multiple chart bars is aggregated, it can provide insight into the history behind chart bars, and thus some bias as to the strength of movements. An up chart bar where 11/12 intrabars are also up is assumed to be stronger than the same up bar where only 2/12 intrabars are up. This logic is not bulletproof, and sometimes Bar Balance will stray. Also, keep in mind that balance lines do not represent price momentum as RSI would. Bar Balance calculations have no idea where price is. Their perspective, like that of any historian, is very limited, constrained that it is to the narrow universe of up/down/neutral intrabar counts. You will thus see instances where price is moving up while Balance Momentum, for example, is moving down. When Bar Balance performs as intended, this indicates that the rally is weakening, which does necessarily imply that price will reverse. Occasionally, price will merrily continue to advance on weakening strength. Divergences Most of the divergence detection methods used here rely on a difference between the bias of a calculation involving a multi-bar average and a given bar's price direction. When using "Bar Balance on Bar" however, only the bar's balance and price movement are used. This is the default mode. As usual, divergences are points of interest because they reveal imbalances, which may or may not become turning points. I do not share the overwhelming enthusiasm traders have for the purported ability of bullish/bearish divergences to indicate imminent reversals. Superfluity In "The Bed of Procrustes", Nassim Nicholas Taleb writes: To bankrupt a fool, give him information . Bar Balance can display lots of information. While learning to use a new indicator inevitably requires an adaptation period where we put it through its paces and try out all its options, once you have become used to Bar Balance and decide to adopt it, rigorously eliminate the components you don't use and configure the remaining ones so their visual prominence reflects their relative importance in your analysis. I tried to provide flexible options for traders to control this indicator's visuals for that exact reason—not for window dressing. █  NOTES For traders • To avoid misleading traders who don't read script descriptions, the indicator shows nothing in the realtime bar. • The Data Window shows key values for the indicator. • All gradients used in this indicator determine their brightness intensities using advances/declines in the signal—not their relative position in a fixed scale. • Note that because of the way gradients are optimized internally, changing their brightness will sometimes require bringing down the value a few steps before you see an impact. • Because this indicator does not use volume, it will work on all markets. For coders • For those interested in gradients, this script uses an advanced version of the Advance/Decline gradient function from the PineCoders Color Gradient (16 colors) Framework . It allows more precise control over the range, steps and min/max values of the gradients. • I use the PineCoders Coding Conventions for Pine to write my scripts. • I used functions modified from the PineCoders MTF Selection Framework for the selection of timeframes. █  THANKS TO: — alexgrover who helped me think through the dampening method used to attenuate signal lines on high ratios of neutral intrabars. — A guy called Kuan who commented on a Backtest Rookies presentation of their Volume Profile indicator . The technique I use to inspect intrabars is derived from Kuan's code. — theheirophant , my partner in the exploration of the sometimes weird abysses of `security()`’s behavior at intrabar resolutions. — midtownsk8rguy , my brilliant companion in mining the depths of Pine graphics. He is also the co-author of the PineCoders Color Gradient Frameworks .
Penunjuk Pine Script®
oleh LucF
29
[BoTo] ATH/2 OverlayThan this indicator is useful? Can help you to understand this indicator who main in the market now. Bulls or bears. How it works All-Time-High ('ATH') - the highest point in price that a cryptocurrency has been in history. Step 1: The 'ATH' line is drawn Step 2: 'ATH/2' line is drawn. Step 3: If the price became more than 'ATH' it means the market bulls have taken, and the price it will be more probable to increase. And vice versa. If the price became less than 'ATH/2' it means that the market was taken by bears, and the price it will be more probable to fall. Step 4: If it is the bull market, then the green background is drawn. And vice versa. If it is the bear market, then the red background is drawn. If the market has changed, then the background will be gray color. Only one candle. How to use it It is possible to use any timeframes, and any symbol. It is possible to use chart type only the japanese candles, the line or bars. Don't use Kagi, Renko or Haiken Ashi! The background can be not shown. You can make 1 or 2 lines. If you have chosen only 1 line, then in the bull market you will see only 'ATH/2' line. And vice versa. In the bear market you will see only the 'ATH' line. You need just to turn on this indicator once to understand what to wait in this market, big falling or big rockets for. And to switch off it that he didn't prevent to analyze. It is the good help for long-term investments (the position can be longer than 1 year) For an example 'Ethereum' 'Ripple' We tried for you. We want to receive your like for good work.
Penunjuk Pine Script®
oleh BoTo
1
Bill Williams Divergent BarsBill William Bull/Bear divergent bars See: Book, Trading Chaos by Bill Williams Coded by polyclick A bullish (green) divergent bar, signals a trend switch from bear -> bull -> The current bar has a lower low than the previous bar, but closes in the upper half of the candle. -> This means the bulls are pushing from below and are trying to take over, potentially resulting in a trend switch to bullish. -> We also check if this bar is below the three alligator lines to avoid false positives. A bearish (red) divergent bar, signals a trend switch from bull -> bear -> The current bar has a higher high than the previous bar, but closes in the lower half of the candle. -> This means the bears are pushing the price down and are taking over, potentially resulting in a trend switch to bearish. -> We also check if this bar is above the three alligator lines to avoid false positives. Best used in combination with the Bill Williams Alligator indicator.
Penunjuk Pine Script®
oleh polyclick
13
Ichimoku Kinko Hyo: Basic StrategyIchimoku Kinko Hyo: Basic Strategy Entry/Exit orders are placed when three basic signals are triggered. Ichimoku Signals: 1) Tenkan-Sen/Kijun-Sen Cross Bullish: Tenkan-Sen is above the Kijun-Sen. Bearish: Tenkan-Sen is below the Kijun-Sen. 2) Chikou-Span Cross Bullish: Chikou-Span is above the close of 26 bars ago. Bearish: Chikou-Span is below the close of 26 bars ago. 3) Price versus Kumo Cloud Bullish: Close is above the Kumo Cloud. Bearish: Close is below the Kumo Cloud. Notes: 1) Long-only or short-only direction is feasible by checkbox. Stop and reverse strategy is taken by default. 2) Built-in Ichimoku indicator is strictly wrong because of counting one extra bar for all Ichimoku components. Including the current bar like moving average is correct way in Japan. This problem is fixed in my script.
Strategi Pine Script®
oleh Mizuki32
25
Aroon ADX/DIUnified trend-strength (ADX/DI) + trend-age (Aroon) with centered scaling, gated signals, regime tints, and a compact readout. What is different about this script: - Purpose-built mashup of ADX/DI tells trend strength and side, while Aroon Oscillator tracks trend emergence/aging. Combining them into a scaled chart creates a way to separate “strong-but-late” trends from “newly-emerging” ones. - Unified scale: Centering the maps into a common +/- 100 range so all lines are directly comparable at a glance (no units mismatch or fumbling with scales). - Signal quality gating: DI cross signals can be gated by minimum ADX so crosses in chop are filtered out. - Regime context: Background tints show low-strength chop, developing, and strong regimes using your ADX thresholds. - Operator-focused UI: Clean fills, color-blind palette, and a two-column table summarizing DI+, DI−, ADX, Aroon, and a plain-English Bias/Trend status. How it works: - DI+/DI−/ADX: Wilder’s DI is smoothed; DX → ADX via SMA smoothing. - Aroon Oscillator: highlights new highs/lows frequency to infer trend - Centering: Maps DI/ADX from 5-95 and ±100, with your Midpoint controlling where “0” sits in raw mode. - Signals: - Bullish/Bearish DI crosses, optionally allowed only when ADX ≥ Min. - ADX crosses of your Low/High thresholds. - Aroon crosses of 0, +80, −80 (fresh trend thresholds). - Display aids: Optional fill between DI+/DI−; thin guides for thresholds; single-pane table summary. How to use: - For this to be useful, centering should stay on, modify ADX Low/High and monitor DI crosses with ADX. - Interpretations: Bias: DI+ above DI− = bull; below = bear. Strength level: ADX < Low = chop, Low–High = developing, > High = strong. Freshness: Aroon > +80 or crossing up 0 suggests new or continued bull push; < −80 or crossing down 0 suggests new or continued bear push. - Alerts: Use built-ins for DI crosses, ADX regime changes, and Aroon thresholds.
Penunjuk Pine Script®
oleh sirpipthegreat
Advanced RSI — Mark 4 RSI was introduced by J. Welles Wilder Jr. in 1978 in New Concepts in Technical Trading Systems. It measures the velocity of gains vs. losses on a bounded 0–100 scale and popularized the 14-period lookback with 70/30 guide rails for overbought/oversold. Over time, traders added variations (different lengths, thresholds, smoothing, adaptive levels), but the core idea stayed the same: momentum turns often precede price turns. and i initially started to make minor adjustments for personal use like changing the default to 17 , and using Tradingviews official RSI which comes with a MA embedded. but it was not enough. especially the visuals. so, for this public release Mark 4 i enhanced RSI by incorporating : 1. Dual-Length Fusion Two RSI periods (default 17 + 21) blended then lightly smoothed (TEMA by default) → steadier line without dulling turns. 2. Adaptive OB/OS (ATR-aware) for fewer whipsaws. 3. OB/OS alt solution: Brief yellow segments appear only at local extremes (default: >72 tops, <32 bottoms) to emphasize exhaustion without repainting the whole line. 4. Signals you can actually see Triangle markers for: Bullish: RSI crossing up through adaptive OS (and still <40 at the cross). Bearish: RSI crossing down through adaptive OB (and still >60 at the cross). “Strong Bull/Bear” background nudges appear when momentum is pushing beyond the bands. Optional Divergence Tags and Tiny diamonds to flag potential bullish/bearish divergences (look-back based). Info Table (can be hidden) my Fav feature i included 5 colorways with modern themes.(pls check under INPUTS) and i made all that to make the indicator visualization look awesome on high end displays. Credits & acknowledgment Inspired by the original RSI by J. Welles Wilder Jr. (1978). Built to be modern, focused, and comfortable for long sessions—especially on dark/OLED displays. THIS INDICATOR IS MORE THAN ENOUGH BUT I DO HAVE PRIVATE INDICATORS WITH DIFFERENT LOGIC FUNCTIONS. I'm open for feedback/collaboration. drsamc.
Penunjuk Pine Script®
oleh Drsamc
Volume Rotor Clock [hapharmonic]🕰️ Volume Rotor Clock The Volume Rotor Clock is an indicator that separates buy and sell volume, compiling these volumes over a recent number of bars or a specified past period, as defined by the user. This helps to reveal accumulation (buying) or distribution (selling) behavior, showing which side has superior volume. With its unique and beautiful display, the Volume Rotor Clock is more than just a timepiece; it's a dynamic dashboard that visualizes the buying and selling pressure of your favorite symbols, all wrapped in an elegant and fully customizable interface. Instead of just tracking price, this indicator focuses on the engine behind the movement: volume. It helps you instantly identify which assets are under accumulation (buying) and which are under distribution (selling). --- 🎨 20 Pre-configured Templates --- 🧐 Interpreting the Clock Display The interface is designed to give you multiple layers of information at a glance. Let's break down what each part represents. 1. The Main Clock Hands (Current Chart Symbol) The clock hands—hour, minute, and second—are dedicated to the symbol on your current active chart . Minute Hand: Displays the base currency of the current symbol (e.g., USDT, USD) at its tip. Hour Hand: Displays the percentage of the winning volume side (buy vs. sell) at its tip. Color Gauge: The color of the text characters at the tip of both the hour and minute hands acts as your primary volume gauge for the current symbol. If buy volume is dominant , the text will be green . If sell volume is dominant , the text will be red . Tooltip: Hovering your mouse over the text at the tip of the hour or minute or other spherical elements hand will reveal a detailed tooltip with the precise Buy Volume, Sell Volume, Total Volume, Buy %, and Sell % for the current chart's symbol. 2. The Volume Scanner: Bulls & Bears (Symbols Inside the Clock) 🐂🐻 The circular symbols scattered inside the clock face are your multi-symbol volume scanner. They represent the assets you've selected in the indicator's settings. Green Circles (Bulls - Upper Half): These represent symbols from your list where the total buy volume is greater than the total sell volume over the defined "Lookback" period. They are considered to be under bullish accumulation. The size of the circle and its text grows larger as the buy percentage becomes more dominant. The percentage shown within the circle represents the buy volume's share of the total volume, calculated over the 'Lookback (Bars)' you've set. Red Circles (Bears - Lower Half): These represent symbols where the total sell volume is greater than the total buy volume. They are considered to be under bearish distribution or selling pressure. The size of the circle indicates the dominance of the sell-side volume. The percentage shown within the circle represents the sell volume's share of the total volume, calculated over the 'Lookback (Bars)' you've set. 3. The Bullish Watchlist (Symbols Above the Clock) ⭐ The symbols arranged neatly along the top edge of the clock are the "best of the bulls." They are symbols that are not only bullish but have also passed an additional, powerful strength filter. What it Means: A symbol appears here when it shows signs of sustained, high-volume buying interest . It's a way to filter out noise and focus on assets with potentially significant accumulation phases. The Filter Logic: For a bullish symbol (where total buy volume > total sell volume) to be promoted to the watchlist, its trading volume must meet specific criteria based on this formula: ta.barssince(not(volume > ta.sma(volume, X))) >= Y In plain English, this means: The indicator checks how many consecutive bars the `volume` has been greater than its `X`-bar Simple Moving Average (`ta.sma(volume, X)`). If this count is greater than or equal to `Y` bars, the condition is met. (You can configure `X` (Volume MA Length) and `Y` (Consecutive Days Above MA) in the settings.) Why it's Useful: This filter is powerful because it looks for consistency . A single spike in volume can be an anomaly. However, when an asset's volume remains consistently above its recent average for several consecutive days, it strongly suggests that larger players or a significant portion of the market are actively accumulating the asset. This sustained interest can often precede a significant upward price trend. --- ⚙️ Indicator Settings Explained The Volume Rotor Clock is highly customizable. Here’s a detailed walkthrough of every setting available in the "Inputs" tab. 🎨 Color Scheme This group allows you to control the entire aesthetic of the clock. Template: Choose from a wide variety of professionally designed color themes. Use Template: A simple checkbox to switch between using a pre-designed theme and creating your own. `Checked`: You can select a theme from the dropdown menu, which offers 20 unique templates like "Cyberpunk Neon" or "Forest Green". All custom color settings below will be disabled (grayed out and unclickable). `Unchecked`: The template dropdown is disabled, and you gain full control over every color element in the sections below. 🖌️ Custom Appearance & Colors These settings are only active when "Use Template" is unchecked. Flame Head / Tail: Sets the start and end colors for the dynamic flame effect that traces the clock's border, representing the second hand. Numbers / Main Numbers: Customize the color of the regular hour numbers (1, 2, 4, 5...) and the main cardinal numbers (3, 6, 9, 12). Sunburst Colors (1-6): Controls the six colors used in the gradient background for the "sunburst" effect inside the clock face. Hands & Digital: Fine-tune the colors for the Hour/Minute Hand, Second Hand, central Pivot point, and the digital time display. Chain Color / Width: Customize the appearance of the two chains holding the clock. 📡 Volume Scanner Control the behavior of the multi-symbol scanner. Show Scanner Labels: A master switch to show or hide all the bull/bear symbol circles inside the clock. Lookback (Bars): A crucial setting that defines the calculation period for buy/sell volume for all scanned symbols. The calculation is a sum over the specified number of recent bars. `0`: Calculates using the current bar only . `7`: Calculates the sum of volume over the last 8 bars (the current bar + 7 historical bars). Symbols List: Here you can enable/disable up to 20 slots and input the ticker for each symbol you want to scan (e.g., BINANCE:BTCUSDT , NASDAQ:AAPL ). ⭐ Bullish Watchlist Filter Configure the criteria for the elite watchlist symbols displayed above the clock. Enable Watchlist: A master switch to turn the entire watchlist feature on or off. Volume MA Length: Sets the lookback period `(X)` for the Simple Moving Average of volume used in the filter. Consecutive Days Above MA: Sets the minimum number of consecutive days `(Y)` that volume must close above its MA to qualify. Symbols Per Row: Determines the maximum number of watchlist symbols that can fit in a single row before a new row is created above it. Background / Text Color: When not using a template, you can set custom colors for the watchlist symbols' background and text. 📏 Position & Size Adjust the clock's placement and dimensions on your chart. Clock Timezone: Sets the timezone for the digital and analog time display. You can use standard formats like "America/New_York" or enter "Exchange" to sync with the chart's timezone. Radius (Bars): Controls the overall size of the clock. The radius is measured in terms of the number of bars on the x-axis. X Offset (Bars): Moves the entire clock horizontally. Positive values shift it to the right; negative values shift it to the left. Y Offset (Price %): Moves the entire clock vertically as a percentage of your screen's price pane. Positive values move it up; negative values move it down.
Penunjuk Pine Script®
oleh hapharmonic
21
Buy/Sell Alert Strong Signals [TCMaster]This indicator combines Smoothed Moving Averages (SMMA), Stochastic Oscillator, and popular candlestick patterns (Engulfing, 3 Line Strike) to highlight potential trend reversal zones. Main features: 4 SMMA lines (21, 50, 100, 200) for short-, medium-, and long-term trend analysis. Trend Fill: Background shading when EMA(2) and SMMA(200) are aligned, visually confirming trend direction. Stochastic Filter: Filters signals based on overbought/oversold conditions to help reduce noise. Candlestick pattern recognition: Bullish/Bearish Engulfing Bullish/Bearish 3 Line Strike Alerts for each pattern when Stochastic conditions are met. ⚠️ Note: This is a technical analysis tool. It does not guarantee accuracy and is not financial advice. Always combine with other analysis methods and practice proper risk management. 🛠 How to Use: 1. SMMA Settings 21 SMMA & 50 SMMA: Short- and medium-term trend tracking. 100 SMMA: Optional mid/long-term filter (toggle on/off). 200 SMMA: Major trend direction reference. 2. Trend Fill EMA(2) > SMMA(200): Background shaded green (uptrend bias). EMA(2) < SMMA(200): Background shaded red (downtrend bias). Can be enabled/disabled in settings. 3. Stochastic Filter K Length, D Smoothing, Smooth K: Adjust sensitivity. Overbought & Oversold: Default 80 / 20 thresholds. Buy signals only valid if Stochastic is oversold. Sell signals only valid if Stochastic is overbought. 4. Candlestick Patterns 3 Line Strike: Bullish: Three consecutive bullish candles followed by one bearish candle closing below the previous, with potential reversal. Bearish: Three consecutive bearish candles followed by one bullish candle closing above the previous, with potential reversal. Engulfing: Bullish: Green candle fully engulfs the prior red candle body. Bearish: Red candle fully engulfs the prior green candle body. 5. Alerts Alerts available for each pattern when Stochastic conditions are met. Example: "Bullish Engulfing + Stochastic confirm". 📌 Important Notes Do not use this indicator as the sole basis for trading decisions. Test on a demo account before applying to live trades. Combine with multi-timeframe analysis, volume, and proper position sizing.
Penunjuk Pine Script®
oleh TCMaster
Volume Stack EmojisVolume Stack visualizes market bias and momentum for each candle using intuitive emojis in a dedicated bottom pane, keeping your main price chart clean and focused. The indicator analyzes where price closes within each bar’s range to estimate bullish or bearish pressure and highlights key momentum shifts. Features: Bullish and Bearish States: 🟩 Green square: Normal bullish candle 🟥 Red square: Normal bearish candle Strong Bullish/Bearish: 🟢 Green circle: Strong bullish (close near high) 🔴 Red circle: Strong bearish (close near low) Critical Transitions: ✅ Green checkmark: Bearish → strong bullish (momentum reversal up) ❌ Red cross: Bullish → strong bearish (momentum reversal down) Easy Visual Scanning: Emojis plotted in the indicator’s own pane for rapid pattern recognition and clean workflow. No overlays: Keeps all symbols off the main price pane. How it works: For each candle, the indicator calculates the percentage distance of the close price within the high/low range, then classifies and marks: Normal bullish/bearish: Basic directional bias Strong signals: Close is at least 75% toward the high (bullish) or low (bearish) Transitions: Detects when the market suddenly flips from bullish to strong bearish (❌), or bearish to strong bullish (✅), pinpointing possible inflection points. This indicator is ideal for traders who want a simple, non-intrusive visualization of intrabar momentum and key reversals—making trend reading and market sentiment effortless.
Penunjuk Pine Script®
oleh EMBurlington
Multi SMA + Golden/Death + Heatmap + BB**Multi SMA (50/100/200) + Golden/Death + Candle Heatmap + BB** A practical trend toolkit that blends classic 50/100/200 SMAs with clear crossover labels, special 🚀 Golden / 💀 Death Cross markers, and a readable candle heatmap based on a dynamic regression midline and volatility bands. Optional Bollinger Bands are included for context. * See trend direction at a glance with SMAs. * Get minimal, de-cluttered labels on important crosses (50↔100, 50↔200, 100↔200). * Highlight big regime shifts with special Golden/Death tags. * Read momentum and volatility with the candle heatmap. * Add Bollinger Bands if you want classic mean-reversion context. Designed to be lightweight, non-repainting on confirmed bars, and flexible across timeframes. # What This Indicator Does (plain English) * **Tracks trend** using **SMA 50/100/200** and lets you optionally compute each SMA on a higher or different timeframe (HTF-safe, no lookahead). * **Prints labels** when SMAs cross each other (up or down). You can force signals only after bar close to avoid repaint. * **Marks Golden/Death Crosses** (50 over/under 200) with special labels so major regime changes stand out. * **Colors candles** with a **heatmap** built from a regression midline and volatility bands—greenish above, reddish below, with a smooth gradient. * **Optionally shows Bollinger Bands** (basis SMA + stdev bands) and fills the area between them. * **Includes alert conditions** for Golden and Death Cross so you can automate notifications. --- # Settings — Simple Explanations ## Source * **Source**: Price source used to calculate SMAs and Bollinger basis. Default: `close`. ## SMA 50 * **Show 50**: Turn the SMA(50) line on/off. * **Length 50**: How many bars to average. Lower = faster but noisier. * **Color 50** / **Width 50**: Visual style. * **Timeframe 50**: Optional alternate timeframe for SMA(50). Leave empty to use the chart timeframe. ## SMA 100 * **Show 100**: Turn the SMA(100) line on/off. * **Length 100**: Bars used for the mid-term trend. * **Color 100** / **Width 100**: Visual style. * **Timeframe 100**: Optional alternate timeframe for SMA(100). ## SMA 200 * **Show 200**: Turn the SMA(200) line on/off. * **Length 200**: Bars used for the long-term trend. * **Color 200** / **Width 200**: Visual style. * **Timeframe 200**: Optional alternate timeframe for SMA(200). ## Signals (crossover labels) * **Show crossover signals**: Prints triangle labels on SMA crosses (50↔100, 50↔200, 100↔200). * **Wait for bar close (confirmed)**: If ON, signals only appear after the candle closes (reduces repaint). * **Min bars between same-pair signals**: Minimum spacing to avoid duplicate labels from the same SMA pair too often. * **Trend filter (buy: 50>100>200, sell: 50<100<200)**: Only show bullish labels when SMAs are stacked bullish (50 above 100 above 200), and only show bearish labels when stacked bearish. ### Label Offset * **Offset mode**: Choose how to push labels away from price: * **Percent**: Offset is a % of price. * **ATR x**: Offset is ATR(14) × multiplier. * **Percent of price (%)**: Used when mode = Percent. * **ATR multiplier (for ‘ATR x’)**: Used when mode = ATR x. ### Label Colors * **Bull color** / **Bear color**: Background of triangle labels. * **Bull label text color** / **Bear label text color**: Text color inside the triangles. ## Golden / Death Cross * **Show 🚀 Golden Cross (50↑200)**: Show a special “Golden” label when SMA50 crosses above SMA200. * **Golden label color** / **Golden text color**: Styling for Golden label. * **Show 💀 Death Cross (50↓200)**: Show a special “Death” label when SMA50 crosses below SMA200. * **Death label color** / **Death text color**: Styling for Death label. ## Candle Heatmap * **Enable heatmap candle colors**: Turns the heatmap on/off. * **Length**: Lookback for the regression midline and volatility measure. * **Deviation Multiplier**: Band width around the midline (bigger = wider). * **Volatility basis**: * **RMA Range** (smoothed high-low range) * **Stdev** (standard deviation of close) * **Upper/Middle/Lower color**: Gradient colors for the heatmap. * **Heatmap transparency (0..100)**: 0 = solid, 100 = invisible. * **Force override base candles**: Repaint base candles so heatmap stays visible even if your chart has custom coloring. ## Bollinger Bands (optional) * **Show Bollinger Bands**: Toggle the overlay on/off. * **Length**: Basis SMA length. * **StdDev Multiplier**: Distance of bands from the basis in standard deviations. * **Basis color** / **Band color**: Line colors for basis and bands. * **Bands fill transparency**: Opacity of the fill between upper/lower bands. --- # Features & How It Works ## 1) HTF-Safe SMAs Each SMA can be calculated on the chart timeframe or a higher/different timeframe you choose. The script pulls HTF values **without lookahead** (non-repainting on confirmed bars). ## 2) Crossover Labels (Three Pairs) * **50↔100**, **50↔200**, **100↔200**: * **Triangle Up** label when the first SMA crosses **above** the second. * **Triangle Down** label when it crosses **below**. * Optional **Trend Filter** ensures only signals aligned with the overall stack (50>100>200 for bullish, 50<100<200 for bearish). * **Debounce** spacing avoids repeated labels for the same pair too close together. ## 3) Golden / Death Cross Highlights * **🚀 Golden Cross**: SMA50 crosses **above** SMA200 (often a longer-term bullish regime shift). * **💀 Death Cross**: SMA50 crosses **below** SMA200 (often a longer-term bearish regime shift). * Separate styling so they stand out from regular cross labels. ## 4) Candle Heatmap * Builds a **regression midline** with **volatility bands**; colors candles by their position inside that channel. * Smooth gradient: lower side → reddish, mid → yellowish, upper side → greenish. * Helps you see momentum and “where price sits” relative to a dynamic channel. ## 5) Bollinger Bands (Optional) * Classic **basis SMA** ± **StdDev** bands. * Light visual context for mean-reversion and volatility expansion. ## 6) Alerts * **Golden Cross**: `🚀 GOLDEN CROSS: SMA 50 crossed ABOVE SMA 200` * **Death Cross**: `💀 DEATH CROSS: SMA 50 crossed BELOW SMA 200` Add these to your alerts to get notified automatically. --- # Tips & Notes * For fewer false positives, keep **“Wait for bar close”** ON, especially on lower timeframes. * Use the **Trend Filter** to align signals with the broader stack and cut noise. * For HTF context, set **Timeframe 50/100/200** to higher frames (e.g., H1/H4/D) while you trade on a lower frame. * Heatmap “Length” and “Deviation Multiplier” control smoothness and channel width—tune for your asset’s volatility.
Penunjuk Pine Script®
oleh a_jabbaroff
On-Chain Signals [LuxAlgo]The On-Chain Signals indicator uses fundamental blockchain metrics to provide traders with an objective technical view of their favorite cryptocurrencies. It uses IntoTheBlock datasets integrated within TradingView to generate four key signals: Net Network Growth, In the Money, Concentration, and Large Transactions. Together, these four signals provide traders with an overall directional bias of the market. All of the data can be visualized as a gauge, table, historical plot, or average. 🔶 USAGE The main goal of this tool is to provide an overall directional bias based on four blockchain signals, each with three possible biases: bearish, neutral, or bullish. The thresholds for each signal bias can be adjusted on the settings panel. These signals are based on IntoTheBlock's On-Chain Signals. Net network growth: Change in the total number of addresses over the last seven periods; i.e., how many new addresses are being created. In the Money: Change in the seven-period moving average of the total supply in the money. This shows how many addresses are profitable. Concentration: Change in the aggregate addresses of whales and investors from the previous period. These are addresses holding at least 0.1% of the supply. This shows how many addresses are in the hands of a few. Large Transactions: Changes in the number of transactions over $100,000. This metric tracks convergence or divergence from the 21- and 30-day EMAs and indicates the momentum of large transactions. All of these signals together form the blockchain's overall directional bias. Bearish: The number of bearish individual signals is greater than the number of bullish individual signals. Neutral: The number of bearish individual signals is equal to the number of bullish individual signals. Bullish: The number of bullish individual signals is greater than the number of bearish individual signals. If the overall directional bias is bullish, we can expect the price of the observed cryptocurrency to increase. If the bias is bearish, we can expect the price to decrease. If the signal is neutral, the price may be more likely to stay the same. Traders should be aware of two things. First, the signals provide optimal results when the chart is set to the daily timeframe. Second, the tool uses IntoTheBlock data, which is available on TradingView. Therefore, some cryptocurrencies may not be available. 🔹 Display Mode Traders have three different display modes at their disposal. These modes can be easily selected from the settings panel. The gauge is set by default. 🔹 Gauge The gauge will appear in the center of the visible space. Traders can adjust its size using the Scale parameter in the Settings panel. They can also give it a curved effect. The number of bars displayed directly affects the gauge's resolution: More bars result in better resolution. The chart above shows the effect that different scale configurations have on the gauge. 🔹 Historical Data The chart above shows the historical data for each of the four signals. Traders can use this mode to adjust the thresholds for each signal on the settings panel to fit the behavior of each cryptocurrency. They can also analyze how each metric impacts price behavior over time. 🔹 Average This display mode provides an easy way to see the overall bias of past prices in order to analyze price behavior in relation to the underlying blockchain's directional bias. The average is calculated by taking the values of the overall bias as -1 for bearish, 0 for neutral, and +1 for bullish, and then applying a triangular moving average over 20 periods by default. Simple and exponential moving averages are available, and traders can select the period length from the settings panel. 🔶 DETAILS The four signals are based on IntoTheBlock's On-Chain Signals. We gather the data, manipulate it, and build the signals depending on each threshold. Net network growth float netNetworkGrowthData = customData('_TOTALADDRESSES') float netNetworkGrowth = 100*(netNetworkGrowthData /netNetworkGrowthData - 1) In the Money float inTheMoneyData = customData('_INOUTMONEYIN') float averageBalance = customData('_AVGBALANCE') float inTheMoneyBalance = inTheMoneyData*averageBalance float sma = ta.sma(inTheMoneyBalance,7) float inTheMoney = ta.roc(sma,1) Concentration float whalesData = customData('_WHALESPERCENTAGE') float inverstorsData = customData('_INVESTORSPERCENTAGE') float bigHands = whalesData+inverstorsData float concentration = ta.change(bigHands )*100 Large Transactions float largeTransacionsData = customData('_LARGETXCOUNT') float largeTX21 = ta.ema(largeTransacionsData,21) float largeTX30 = ta.ema(largeTransacionsData,30) float largeTransacions = ((largeTX21 - largeTX30)/largeTX30)*100 🔶 SETTINGS Display mode: Select between gauge, historical data and average. Average: Select a smoothing method and length period. 🔹 Thresholds Net Network Growth : Bullish and bearish thresholds for this signal. In The Money : Bullish and bearish thresholds for this signal. Concentration : Bullish and bearish thresholds for this signal. Transactions : Bullish and bearish thresholds for this signal. 🔹 Dashboard Dashboard : Enable/disable dashboard display Position : Select dashboard location Size : Select dashboard size 🔹 Gauge Scale : Select the size of the gauge Curved : Enable/disable curved mode Select Gauge colors for bearish, neutral and bullish bias 🔹 Style Net Network Growth : Enable/disable historical plot and choose color In The Money : Enable/disable historical plot and choose color Concentration : Enable/disable historical plot and choose color Large Transacions : Enable/disable historical plot and choose color
Penunjuk Pine Script®
oleh LuxAlgo
8
First candle of ≥4 same‑colour candlesClassifies each candle as bullish or bearish. A candle is considered bullish when the closing price is above the opening price, and bearish when the closing price is below the opening price investopedia.com ; traditional charts depict bullish candles in green or white and bearish candles in red or black investopedia.com . Counts consecutive candles of the same colour. Whenever a green candle appears, it increments a “bull run” counter; the counter resets to zero on a red candle. Likewise, it maintains a “bear run” counter that increments on red candles and resets on green candles. Detects long runs of momentum. If a run of green candles reaches four or more bars, the indicator marks the very first candle of that sequence with a small green triangle below the bar. Similarly, if a run of red candles reaches four or more bars, it marks the first candle of that bearish run with a red triangle above the bar. Only the initial bar of each qualifying run is highlighted, even if the run later extends to five, six, or more candles.
Penunjuk Pine Script®
oleh vandrob2005
Divergence Indicator with Multi-Length Pivot DetectionThis Pine Script, titled “Divergence Indicator with Multi-Length Pivot Detection”, tool that detects both regular and hidden divergences between price action and an oscillator (defaulting to close, but configurable). It features multi-length pivot logic, angle-based validation, no-cross filtering, and OB/OS region filtering, making it a robust and precise divergence engine. Below is a detailed breakdown: ⸻ 🔧 Inputs and Configuration     •    osc_src: Oscillator source (e.g. close, RSI, MACD).     •    show_hidden: Toggles detection of hidden divergences.     •    min_*_angle settings: Control the minimum angle thresholds (in degrees) for confirming valid divergences (ensures momentum is strong enough).     •    validate_no_cross: Ensures oscillator and price slopes don’t “cross” the actual values (i.e. filters out invalid or messy trends).     •    oversold_level, overbought_level: Used when use_ob_os_filter is enabled to require oscillator to be in OS/OB zones for regular divergence.     •    min_div_length: Minimum distance in bars between previous and current pivot points. ⸻ 🔁 Internal Engine Mechanics 1. Pivot Detection Engine (Phase 1: Historical Memory)     •    For all combinations of left1 and right1 in the range :     •    Records all valid pivot lows and pivot highs.     •    Stores their:     •    bar index     •    price value     •    oscillator value This forms a “memory buffer” of past pivots that future price pivots are compared against. 2. Current Pivot Detection (Phase 2: Scanning)     •    Loops through larger pivot configurations (left2 ∈ , right2 = 1) to detect new current pivots.     •    For each new pivot, it compares against the historical pivots from phase 1. ⸻ 📐 Slope and Angle Calculation For each matching pivot pair (historical vs current):     •    Price and Oscillator Slopes are calculated via linear regression, producing:     •    price_angle     •    osc_angle     •    These are converted using math.atan() and math.todegrees() to get proper angular direction and intensity of trend. ⸻ 🧠 Divergence Logic ✅ Bullish Divergence     •    Regular Bullish: Price makes a lower low, oscillator makes a higher low.     •    Hidden Bullish: Price makes a higher low, oscillator makes a lower low.     •    Conditions:     •    Must meet minimum angle thresholds.     •    Optional: Must be in oversold region (osc_src < oversold_level).     •    If validate_no_cross is enabled, linearly interpolated slope must not be violated. ✅ Bearish Divergence     •    Regular Bearish: Price makes a higher high, oscillator makes a lower high.     •    Hidden Bearish: Price makes a lower high, oscillator makes a higher high.     •    Conditions mirror the bullish case (with polarity reversed). ⸻ 🖍️ Visualization     •    Draws colored lines between pivots for visual clarity:     •    Green: Regular Bullish     •    Lime: Hidden Bullish     •    Red: Regular Bearish     •    Maroon: Hidden Bearish     •    Uses plotshape() to mark divergence bars:     •    Triangle-up for bullish     •    Triangle-down for bearish The lines and shapes help quickly identify divergence zones with strong momentum structure. ⸻ 🧪 Filtering Enhancements     •    No Cross Slope Filter: Checks that oscillator and price values stay above/below their respective slope lines throughout the interval.     •    OB/OS Filter: Restricts divergence signals to occur only in oversold/overbought conditions for regular divergences.     •    Signal Thinning: Keeps line count to 100 using array.shift() and line.delete(). ⸻ 🧬 Design Philosophy     •    Built to mimic institutional-grade divergence detection, avoiding common false positives.     •    Uses adaptive pivots, rigorous angle validation, and noise filtering.
Penunjuk Pine Script®
oleh Cmo22
3
Smart RSI Divergence PRO | Auto Lines + Alerts📌 Purpose This indicator automatically detects Regular and Hidden RSI Divergences between price action and the RSI oscillator. It plots divergence lines directly on the chart, labels signals, and includes alerts for automated monitoring. 🧠 How It Works 1. RSI Calculation RSI is calculated using the selected Source (default: Close) and RSI Length (default: 14). 2. Divergence Detection via Fractals Swing points on both price and RSI are detected using fractal logic (5-bar patterns). Regular Divergence: Bearish: Price forms a higher high, RSI forms a lower high. Bullish: Price forms a lower low, RSI forms a higher low. Hidden Divergence: Bearish: Price forms a lower high, RSI forms a higher high. Bullish: Price forms a higher low, RSI forms a lower low. 3. Auto Drawing Lines Lines are drawn automatically between divergence points: Red = Regular Bearish Green = Regular Bullish Orange = Hidden Bearish Blue = Hidden Bullish Line width and transparency are adjustable. 4. Labels and Alerts Labels mark divergence points with up/down arrows. Alerts trigger for each divergence type. 📈 How to Use Use Regular Divergences to anticipate trend reversals. Use Hidden Divergences to confirm trend continuation. Combine with support/resistance, trendlines, or volume for higher probability setups. Recommended Timeframes: Works on all timeframes; more reliable on 1h, 4h, and Daily. Markets: Forex, Crypto, Stocks. ⚙️ Inputs Source (Close, HL2, etc.) RSI Length Toggle Regular / Hidden Divergence visibility Toggle Lines / Labels Line Width & Line Transparency ⚠️ Disclaimer This script is for educational purposes only. It does not constitute financial advice. Always test thoroughly before using in live trading.
Penunjuk Pine Script®
oleh artemka3091
The Visualized Trader (Fractal Timeframe)The **The Visualized Trader (Fractal Timeframe)** indicator for TradingView is a tool designed to help traders identify strong bullish or bearish trends by analyzing multiple technical indicators across two timeframes: the current chart timeframe and a user-selected higher timeframe. It visually displays trend alignment through arrows on the chart and a condition table in the top-right corner, making it easy to see when conditions align for potential trade opportunities. ### Key Features 1. **Multi-Indicator Analysis**: Combines five technical conditions to confirm trend direction: - **Trend**: Based on the slope of the 50-period Simple Moving Average (SMA). Upward slope indicates bullish, downward indicates bearish. - **Stochastic (Stoch)**: Uses Stochastic Oscillator (5, 3, 2) to measure momentum. Rising values suggest bullish momentum, falling values suggest bearish. - **Momentum (Mom)**: Derived from the MACD fast line (5, 20, 30). Rising MACD line indicates bullish momentum, falling indicates bearish. - **Dad**: Uses the MACD signal line. Rising signal line is bullish, falling is bearish. - **Price Change (PC)**: Compares the current close to the previous close. Higher close is bullish, lower is bearish. 2. **Dual Timeframe Comparison**: - Calculates the same five conditions on both the current timeframe and a user-selected higher timeframe (e.g., daily). - Helps traders see if the trend on the higher timeframe aligns with the current chart, providing context for stronger trade decisions. 3. **Visual Signals**: - **Arrows on Chart**: - **Current Timeframe**: Blue upward arrows below bars for bullish alignment, red downward arrows above bars for bearish alignment. - **Higher Timeframe**: Green upward triangles below bars for bullish alignment, orange downward triangles above bars for bearish alignment. - Arrows appear only when all five conditions align (all bullish or all bearish), indicating strong trend potential. 4. **Condition Table**: - Displays a table in the top-right corner with two rows: - **Top Row**: Current timeframe conditions (Trend, Stoch, Mom, Dad, PC). - **Bottom Row**: Higher timeframe conditions (labeled with "HTF"). - Each cell is color-coded: green for bullish, red for bearish. - The table can be toggled on/off via input settings. 5. **User Input**: - **Show Condition Boxes**: Toggle the table display (default: on). - **Comparison Timeframe**: Choose the higher timeframe (e.g., "D" for daily, default setting). ### How It Works - The indicator evaluates the five conditions on both timeframes. - When all conditions are bullish (or bearish) on a given timeframe, it plots an arrow/triangle to signal a strong trend. - The condition table provides a quick visual summary, allowing traders to compare the current and higher timeframe trends at a glance. ### Use Case - **Purpose**: Helps traders confirm strong trend entries by ensuring multiple indicators align across two timeframes. - **Example**: If you're trading on a 1-hour chart and see blue arrows with all green cells in the current timeframe row, plus green cells in the higher timeframe (e.g., daily) row, it suggests a strong bullish trend supported by both timeframes. - **Benefit**: Reduces noise by focusing on aligned signals, helping traders avoid weak or conflicting setups. ### Settings - Access the indicator settings in TradingView to: - Enable/disable the condition table. - Select a higher timeframe (e.g., 4H, D, W) for comparison. ### Notes - Best used in trending markets; may produce fewer signals in choppy conditions. - Combine with other analysis (e.g., support/resistance) for better decision-making. - The higher timeframe signals (triangles) provide context, so prioritize trades where both timeframes align. This indicator simplifies complex trend analysis into clear visual cues, making it ideal for traders seeking confirmation of strong momentum moves.
Penunjuk Pine Script®
oleh TSA_TimeSpaceAlgorithm
Fibonacci Sequence Moving Average [BackQuant]Fibonacci Sequence Moving Average with Adaptive Oscillator 1. Overview The Fibonacci Sequence Moving Average indicator is a two‑part trading framework that combines a custom moving average built from the famous Fibonacci number set with a fully featured oscillator, normalisation engine and divergence suite. The moving average half delivers an adaptive trend line that respects natural market rhythms, while the oscillator half translates that trend information into a bounded momentum stream that is easy to read, easy to compare across assets and rich in confluence signals. Everything from weighting logic to colour palettes can be customised, so the tool comfortably fits scalpers zooming into one‑minute candles as well as position traders running multi‑month trend following campaigns. 2. Core Calculation Fibonacci periods – The default length array is 5, 8, 13, 21, 34. A single multiplier input lets you scale the whole family up or down without breaking the golden‑ratio spacing. For example a multiplier of 3 yields 15, 24, 39, 63, 102. Component averages – Each period is passed through Simple Moving Average logic to produce five baseline curves (ma1 through ma5). Weighting methods – You decide how those five values are blended: • Equal weighting treats every curve the same. • Linear weighting applies factors 1‑to‑5 so the slowest curve counts five times as much as the fastest. • Exponential weighting doubles each step for a fast‑reacting yet still smooth line. • Fibonacci weighting multiplies each curve by its own period value, honouring the spirit of ratio mathematics. Smoothing engine – The blended average is then smoothed a second time with your choice of SMA, EMA, DEMA, TEMA, RMA, WMA or HMA. A short smoothing length keeps the result lively, while longer lengths create institution‑grade glide paths that act like dynamic support and resistance. 3. Oscillator Construction Once the smoothed Fib MA is in place, the script generates a raw oscillator value in one of three flavours: • Distance – Percentage distance between price and the average. Great for mean‑reversion. • Momentum – Percentage change of the average itself. Ideal for trend acceleration studies. • Relative – Distance divided by Average True Range for volatility‑aware scaling. That raw series is pushed through a look‑back normaliser that rescales every reading into a fixed −100 to +100 window. The normalisation window defaults to 100 bars but can be tightened for fast markets or expanded to capture long regimes. 4. Visual Layer The oscillator line is gradient‑coloured from deep red through sky blue into bright green, so you can spot subtle momentum shifts with peripheral vision alone. There are four horizontal guide lines: Extreme Bear at −50, Bear Threshold at −20, Bull Threshold at +20 and Extreme Bull at +50. Soft fills above and below the thresholds reinforce the zones without cluttering the chart. The smoothed Fib MA can be plotted directly on price for immediate trend context, and each of the five component averages can be revealed for educational or research purposes. Optional bar‑painting mirrors oscillator polarity, tinting candles green when momentum is bullish and red when momentum is bearish. 5. Divergence Detection The script automatically looks for four classes of divergences between price pivots and oscillator pivots: Regular Bullish, signalling a possible bottom when price prints a lower low but the oscillator prints a higher low. Hidden Bullish, often a trend‑continuation cue when price makes a higher low while the oscillator slips to a lower low. Regular Bearish, marking potential tops when price carves a higher high yet the oscillator steps down. Hidden Bearish, hinting at ongoing downside when price posts a lower high while the oscillator pushes to a higher high. Each event is tagged with an ℝ or ℍ label at the oscillator pivot, colour‑coded for clarity. Look‑back distances for left and right pivots are fully adjustable so you can fine‑tune sensitivity. 6. Alerts Five ready‑to‑use alert conditions are included: • Bullish when the oscillator crosses above +20. • Bearish when it crosses below −20. • Extreme Bullish when it pops above +50. • Extreme Bearish when it dives below −50. • Zero Cross for momentum inflection. Attach any of these to TradingView notifications and stay updated without staring at charts. 7. Practical Applications Swing trading trend filter – Plot the smoothed Fib MA on daily candles and only trade in its direction. Enter on oscillator retracements to the 0 line. Intraday reversal scouting – On short‑term charts let Distance mode highlight overshoots beyond ±40, then fade those moves back to mean. Volatility breakout timing – Use Relative mode during earnings season or crypto news cycles to spot momentum surges that adjust for changing ATR. Divergence confirmation – Layer the oscillator beneath price structure to validate double bottoms, double tops and head‑and‑shoulders patterns. 8. Input Summary • Source, Fibonacci multiplier, weighting method, smoothing length and type • Oscillator calculation mode and normalisation look‑back • Divergence look‑back settings and signal length • Show or hide options for every visual element • Full colour and line width customisation 9. Best Practices Avoid using tiny multipliers on illiquid assets where the shortest Fibonacci window may drop under three bars. In strong trends reduce divergence sensitivity or you may see false counter‑trend flags. For portfolio scanning set oscillator to Momentum mode, hide thresholds and colour bars only, which turns the indicator into a heat‑map that quickly highlights leaders and laggards. 10. Final Notes The Fibonacci Sequence Moving Average indicator seeks to fuse the mathematical elegance of the golden ratio with modern signal‑processing techniques. It is not a standalone trading system, rather a multi‑purpose information layer that shines when combined with market structure, volume analysis and disciplined risk management. Always test parameters on historical data, be mindful of slippage and remember that past performance is never a guarantee of future results. Trade wisely and enjoy the harmony of Fibonacci mathematics in your technical toolkit.
Penunjuk Pine Script®
oleh BackQuant
MACD Trend StatusOverview: The Dynamic MACD Trend Status indicator is a sophisticated yet easy-to-interpret tool designed to provide instant, color-coded insights into the current MACD momentum and trend strength directly on your chart. Unlike traditional MACD indicators that clutter your main price panel, this indicator distills complex MACD calculations into a single, prominent text label, ideal for quick confirmations and fast-paced trading. It features two distinct logic modes, allowing you to customize its sensitivity and confirmation level, making it adaptable to various market conditions and trading styles. Key Features & How It Works: Two Selectable Logic Modes: This indicator offers a unique dropdown setting (Logic Selection) to switch between two powerful MACD interpretation algorithms: a) Option 3 (Robust) - (Default) This is the most stringent and reliable mode, designed to filter out market noise and highlight only strong, accelerating trends. It declares a "Bullish" or "Bearish" status when ALL of the following conditions are met: Bullish: MACD Line is above Signal Line AND MACD Histogram is positive AND MACD Histogram is increasing (momentum is accelerating) AND both MACD Line and Signal Line are above the Zero Line (confirming an overall uptrend). Bearish: MACD Line is below Signal Line AND MACD Histogram is negative AND MACD Histogram is decreasing (momentum is accelerating) AND both MACD Line and Signal Line are below the Zero Line (confirming an overall downtrend). Neutral: If none of the above strong conditions are met, indicating sideways movement, weakening momentum, or a transition phase. b) Option 4 (Simplified + Enhanced) This mode offers a more responsive signal while still providing a clear distinction for exceptionally strong moves. It determines status based on: "MACD Bullish +" (Super Bullish): If all the rigorous conditions of "Option 3 (Robust) - Bullish" are met. This provides an immediate visual cue of extreme bullish strength within the simpler logic. "MACD Bearish +" (Super Bearish): If all the rigorous conditions of "Option 3 (Robust) - Bearish" are met. This highlights exceptional bearish strength. "MACD Bullish": MACD Line is above Signal Line AND MACD Histogram is positive (basic bullish momentum). "MACD Bearish": MACD Line is below Signal Line AND MACD Histogram is negative (basic bearish momentum). "MACD Neutral": If none of the above conditions are met. Instant Color-Coded Status: The indicator provides clear visual feedback through dynamic text colors: Green: "MACD Bullish" (Standard Bullish) Red: "MACD Bearish" (Standard Bearish) Gray: "MACD Neutral" (Choppy/Unclear) Blue: "MACD Bullish +" (Enhanced Strong Bullish - when using Option 4) Fuchsia/Purple: "MACD Bearish +" (Enhanced Strong Bearish - when using Option 4) (Note: Colors for "+" signals are customizable in the code if you wish) Unobtrusive Display: The status is displayed in a transparent, discreet table positioned at the middle-right of your main chart panel. This avoids cluttering the top corners or the indicator sub-panel, keeping your price action clear. Ideal Use Cases: Quick Confirmation: Rapidly confirm your trade ideas with a glance at the MACD's underlying momentum. Scalping & Day Trading: The instant visual feedback is invaluable for fast-paced short-term strategies. Momentum Filtering: Use it to filter trades, ensuring you're entering when MACD momentum is in your favor. Complementary Tool: Designed to work hand-in-hand with your primary analysis (price action, support/resistance, other indicators). It's not intended as a standalone signal but as a powerful re-confirmation tool. Customization Options: MACD Settings: Adjust Fast Length, Slow Length, and Signal Length. Logic Selection: Toggle between "Option 3 (Robust)" and "Option 4 (Simplified)" for different sensitivities. Show Status Text: Toggle the visibility of the status text On/Off. Text Size: Choose from "tiny", "small", "normal", "large", "huge" for optimal visibility. Important Disclaimer: This indicator is a technical analysis tool and should be used as part of a comprehensive trading strategy. It is not financial advice. Trading in financial markets involves substantial risk, and you could lose money. Always perform your own research and risk management.
Penunjuk Pine Script®
oleh tessyjoppan
Market Pulse ProMarket Pulse Pro (Pulse‑X) — User Guide Market Pulse Pro, also known as Pulse‑X, is an advanced momentum indicator that combines SMI, Stochastic RSI, and a smoothed signal line to identify zones of buying and selling strength in the market. It is designed to assess the balance of power between bulls and bears with clear visualizations. How It Works The indicator calculates three main components: SMI (Stochastic Momentum Index) – measures price position relative to its recent range. Stochastic RSI – captures overbought/oversold extremes of the RSI. Smoothed Signal Line – based on closing price, smoothed using various methods (such as HMA, EMA, etc.). Each component is normalized to create two final values: Bull Herd (Buying Strength) – green line. Bear Winter (Selling Strength) – red line. Interpretation Bull Herd (high green values): Bulls dominate the market. May indicate the start or continuation of an uptrend. Bear Winter (high red values): Bears dominate. May indicate reversal or continuation of a downtrend. Convergence around 50%: Market is balanced. Signals are weaker or indecisive. Tip: Combine with price action analysis or support/resistance levels to confirm entries. Customizable Settings You can adjust: SMI Period, Smooth K, and D – control the sensitivity of the SMI. RSI Period – sets the RSI calculation window. Signal Period – period for the price-based signal line. Smoothing Methods – choose between HMA, EMA, WMA, JMA, SMMA, etc. Line Width – thickness of the plotted lines. Note: The JMA (Jurik Moving Average) used in this script is not the original proprietary version. It is a custom public version, based on open-source code shared by the TradingView community. The original JMA is copyrighted and owned by Jurik Research. How to Use It in Practice Buy Entries When the green Bull Herd line crosses above 60 and the red Bear Winter line falls below 40. Entry is more reliable if the green line is rising steadily. Sell Entries When the red Bear Winter line crosses above 60 and the green Bull Herd line falls. Signals are stronger when there is a clear crossover and divergence between the two lines. Avoid trading near the neutral zone (~50%), where the market shows indecision. Additional Tips Combine with volume analysis or reversal candlestick patterns for higher accuracy. Test different smoothing methods: HMA is more responsive, SMMA is smoother and slower.
Penunjuk Pine Script®
oleh Canhoto-Medium
1
(Mustang Algo) Stochastic RSI + Triple EMAStochastic RSI + Triple EMA (StochTEMA) Overview The Stochastic RSI + Triple EMA indicator combines the Stochastic RSI oscillator with a Triple Exponential Moving Average (TEMA) overlay to generate clear buy and sell signals on the price chart. By measuring RSI overbought/oversold conditions and confirming trend direction with TEMA, this tool helps traders identify high-probability entries and exits while filtering out noise in choppy markets. Key Features Stochastic RSI Calculation Computes a standard RSI over a user-defined period (default 50). Applies a Stochastic oscillator to the RSI values over a second user-defined period (default 50). Smooths the %K line by taking an SMA over a third input (default 3), and %D is an SMA of %K over another input (default 3). Defines oversold when both %K and %D are below 20, and overbought when both are above 80. Triple EMA (TEMA) Calculates three successive EMAs on the closing price with the same length (default 9). Combines them using TEMA = 3×(EMA1 – EMA2) + EMA3, producing a fast-reacting trend line. Bullish trend is identified when price > TEMA and TEMA is rising; bearish trend when price < TEMA and TEMA is falling; neutral/flat when TEMA change is minimal. Signal Logic Strong Buy: Previous bar’s Stoch RSI was oversold (both %K and %D < 20), %K crosses above %D, and TEMA is in a bullish trend. Medium Buy: %K crosses above %D (without requiring oversold), TEMA is bullish, and previous %K < 50. Weak Buy: Previous bar’s %K and %D were oversold, %K crosses above %D, TEMA is flat or bullish (not bearish). Strong Sell: Previous bar’s Stoch RSI was overbought (both %K and %D > 80), %K crosses below %D, and TEMA is bearish. Medium Sell: %K crosses below %D (without requiring overbought), TEMA is bearish, and previous %K > 50. Weak Sell: Previous bar’s %K and %D were overbought, %K crosses below %D, TEMA is flat or bearish (not bullish). Visual Elements on Chart TEMA Line: Plotted in cyan (#00BCD4) with a medium-thick line for clear trend visualization. Buy/Sell Markers: BUY STRONG: Lime label below the candle BUY MEDIUM: Green triangle below the candle BUY WEAK: Semi-transparent green circle below the candle SELL STRONG: Red label above the candle SELL MEDIUM: Orange triangle above the candle SELL WEAK: Semi-transparent orange circle above the candle Candle & Background Coloring: When a strong buy or sell signal occurs, the candle body is tinted (semi-transparent lime/red) and the chart background briefly flashes light green (buy) or light red (sell). Dynamic Support/Resistance: On a strong buy signal, a green dot is plotted under that bar’s low as a temporary support marker. On a strong sell signal, a red dot is plotted above that bar’s high as a temporary resistance marker. Alerts Strong Buy Alert: Triggered when Stoch RSI is oversold, %K crosses above %D, and TEMA is bullish. Strong Sell Alert: Triggered when Stoch RSI is overbought, %K crosses below %D, and TEMA is bearish. General Buy Alert: Triggered on any bullish crossover (%K > %D) when TEMA is not bearish. General Sell Alert: Triggered on any bearish crossover (%K < %D) when TEMA is not bullish. Inputs Stochastic RSI Settings (group “Stochastic RSI”): K (smoothK): Period length for smoothing the %K line (default 3, minimum 1) D (smoothD): Period length for smoothing the %D line (default 3, minimum 1) RSI Length (lengthRSI): Number of bars used for the RSI calculation (default 50, minimum 1) Stochastic Length (lengthStoch): Number of bars for the Stochastic oscillator applied to RSI (default 50, minimum 1) RSI Source (src): Price source for the RSI (default = close) TEMA Settings (group “Triple EMA”): TEMA Length (lengthTEMA): Number of bars used for each of the three EMAs (default 9, minimum 1) How to Use Add the Script Copy and paste the indicator code into TradingView’s Pine Editor (version 6). Save the script and add it to your chart as “Stochastic RSI + Triple EMA (StochTEMA).” Adjust Inputs Choose shorter lengths for lower timeframes (e.g., intraday scalping) and longer lengths for higher timeframes (e.g., swing trading). Fine-tune the Stochastic RSI parameters (K, D, RSI Length, Stochastic Length) to suit the volatility of the instrument. Modify TEMA Length if you prefer a faster or slower moving average response. Interpret Signals Primary Entries/Exits: Focus on “BUY STRONG” and “SELL STRONG” signals, as they require both oversold/overbought conditions and a confirming TEMA trend. Confirmation Signals: Use “BUY MEDIUM”/“BUY WEAK” to confirm or add to an existing position when the market is trending. Similarly, “SELL MEDIUM”/“SELL WEAK” can be used to scale out or confirm bearish momentum. Support/Resistance Dots: These help identify recent swing lows (green dots) and swing highs (red dots) that were tagged by strong signals—useful to place stop-loss or profit-target orders. Set Alerts Open the Alerts menu (bell icon) in TradingView, choose this script, and select the desired alert condition (e.g., “BUY Signal Strong”). Configure notifications (popup, email, webhook) according to your trading workflow. Notes & Best Practices Filtering False Signals: By combining Stoch RSI crossovers with TEMA trend confirmation, most false breakouts during choppy price action are filtered out. Timeframe Selection: This indicator works on all timeframes, but shorter timeframes may generate frequent signals—consider higher-timeframe confirmation when trading lower timeframes. Risk Management: Always use proper position sizing and stop-loss placement. An “oversold” or “overbought” reading can remain extended for some time in strong trends. Backtesting/Optimization: Before live trading, backtest different parameter combinations on historical data to find the optimal balance between sensitivity and reliability for your chosen instrument. No Guarantee of Profits: As with any technical indicator, past performance does not guarantee future results. Use in conjunction with other forms of analysis (volume, price patterns, fundamentals). Author: Your Name or Username Version: 1.0 (Pine Script v6) Published: June 2025 Feel free to customize input values and visual preferences. If you find bugs or have suggestions for improvements, open an issue or leave a comment below. Trade responsibly!
Penunjuk Pine Script®
oleh MustangAlgo
Canuck Trading Projection IndicatorCanuck Trading Projection Indicator Overview The Canuck Trading Projection Indicator is a powerful PineScript v6 tool designed for TradingView to project potential bullish and bearish price trajectories based on historical price and volume movements. It provides traders with actionable insights by estimating future price targets and assigning confidence levels to each outlook, helping to identify probable market directions across any timeframe. Ideal for both short-term and long-term traders, this indicator combines momentum analysis, RSI filtering, support/resistance detection, and time-weighted trend analysis to deliver robust projections. Features Bullish and Bearish Projections: Forecasts price targets for upward (bullish) and downward (bearish) movements over a user-defined projection period (default 20 bars). Confidence Levels: Assigns percentage confidence scores to each outlook, reflecting the likelihood of the projected price based on historical trends, volatility, and volume. RSI Filter: Incorporates a 14-period Relative Strength Index (RSI) to validate trends, requiring RSI > 50 for bullish and RSI < 50 for bearish signals. Support/Resistance Detection: Adjusts confidence levels when projections are near key swing highs/lows (within 2% of average price), boosting confidence by 5% for alignments. Time-Based Weighting: Prioritizes recent price movements in trend analysis, giving more weight to newer bars for improved relevance. Customizable Inputs: Allows users to tailor lookback period, projection bars, RSI period, confidence threshold, colors, and label positioning. Forced Label Spacing: Prevents overlap of bullish and bearish text labels, even for tight projections, using fixed vertical slots when price differences are small (<2% of average price). Timeframe Flexibility: Works seamlessly across all TradingView timeframes (e.g., 30-minute, hourly, daily, weekly, monthly), adapting projections to the chart’s resolution. Clean Visualization: Displays projections as green (bullish) and red (bearish) dashed lines, with non-overlapping text labels at the projection endpoints showing price targets and confidence levels. How It Works The indicator analyzes historical price and volume data over a user-defined lookback period (default 50 bars) to calculate: Momentum: Combines price changes and volume to assess trend strength, using a weighted moving average (WMA) for directional bias. Trend Analysis: Counts bullish (price up, volume above average, RSI > 50) and bearish (price down, volume above average, RSI < 50) trends, weighting recent bars more heavily. Projections: Bullish Slope: Positive or flat when momentum is upward, scaled by price change and momentum intensity. Bearish Slope: Negative or flat when momentum is downward, amplified by bearish confidence for stronger projections. Projects prices forward by 20 bars (default) using current close plus slope times projection bars. Confidence Levels: Base confidence derived from the proportion of bullish/bearish trends, with a 5% minimum to avoid zero confidence. Adjusted by volatility (lower volatility increases confidence), volume trends, and proximity to support/resistance levels. Visualization: Draws projection lines from the current close to the 20-bar future target. Places text labels at line endpoints, showing price targets and confidence percentages, with forced spacing for readability. Input Parameters Lookback Period (default: 50): Number of bars for historical analysis (minimum 10). Projection Bars (default: 20): Number of bars to project forward (minimum 5). Confidence Threshold (default: 0.6): Minimum confidence for strong trend indication (0.1 to 1.0). Bullish Projection Line Color (default: Green): Color for bullish projection line and label. Bearish Projection Line Color (default: Red): Color for bearish projection line and label. RSI Period (default: 14): Period for RSI momentum filter (minimum 5). Label Vertical Offset (%) (default: 1.0): Base offset for labels as a percentage of price range (0.1% to 5.0%). Minimum Label Spacing (%) (default: 2.0): Minimum vertical spacing between labels for tight projections (0.5% to 10.0%). Usage Instructions Add to Chart: Copy the script into TradingView’s Pine Editor, save, and add the indicator to your chart. Select Timeframe: Apply to any timeframe (e.g., 30-minute, hourly, daily, weekly, monthly) to match your trading strategy. Interpret Outputs: Green Line/Label: Bullish price target and confidence (e.g., "Bullish: 414.37, Confidence: 35%"). Red Line/Label: Bearish price target and confidence (e.g., "Bearish: 279.08, Confidence: 41.3%"). Higher confidence indicates a stronger likelihood of the projected outcome. Adjust Inputs: Modify Lookback Period to focus on shorter/longer historical trends (e.g., 20 for short-term, 100 for long-term). Change Projection Bars to adjust forecast horizon (e.g., 10 for shorter, 50 for longer). Tweak RSI Period or Confidence Threshold for sensitivity to momentum or trend strength. Customize Colors for visual preference. Increase Minimum Label Spacing if labels overlap in volatile markets. Combine with Analysis: Use alongside other indicators (e.g., moving averages, Bollinger Bands) or fundamental analysis to confirm signals, as projections are probabilistic. Example: TSLA Across Timeframes Using live TSLA data (close ~346.46 USD, May 31, 2025), the indicator produces: 30-Minute: Bullish 341.93 (13.3%), Bearish 327.96 (86.7%) – Strong bearish sentiment due to intraday volatility. 1-Hour: Bullish 342.00 (33.9%), Bearish 327.50 (62.3%) – Bearish but less intense, reflecting hourly swings. 4-Hour: Bullish 345.52 (73.4%), Bearish 344.44 (19.0%) – Flat outlook, indicating consolidation. Daily: Bullish 391.26 (68.8%), Bearish 302.22 (31.2%) – Bullish bias from recent uptrend, bearish tempered by longer lookback. Weekly: Bullish 414.37 (35.0%), Bearish 279.08 (41.3%) – Wide range, reflecting annual volatility. Monthly: Bullish 396.70 (54.9%), Bearish 296.93 (10.2%) – Long-term bullish optimism. These results align with market dynamics: short-term intervals capture volatility, while longer intervals smooth trends, providing balanced outlooks. Notes Accuracy: Projections are estimates based on historical data and should be used with other analysis tools. Confidence levels indicate likelihood, not certainty. Timeframe Sensitivity: Short-term intervals (e.g., 30-minute) show larger price swings and higher confidence due to volatility, while longer intervals (e.g., monthly) are more stable. Customization: Adjust inputs to match your trading style (e.g., shorter lookback for day trading, longer for swing trading). Performance: Tested on volatile stocks like TSLA, NVIDIA, and others, ensuring robust performance across markets. Limitations: May produce conservative bearish projections in strong uptrends due to momentum weighting. Adjust lookback or projection_bars for sensitivity. Feedback If you encounter issues (e.g., label overlap, projection mismatches), please share your timeframe, settings, or a screenshot. Suggestions for enhancements (e.g., additional filters, visual tweaks) are welcome! Disclaimer The Canuck Trading Projection Indicator is provided for educational and informational purposes only. It is not financial advice. Trading involves significant risks, and past performance is not indicative of future results. Always perform your own due diligence and consult a qualified financial advisor before making trading decisions.
Penunjuk Pine Script®
oleh ctoincanada
Market Sentiment Index US Top 40 [Pt]▮Overview Market Sentiment Index US Top 40 [Pt} shows how the largest US stocks behave together. You pick one simple measure—High Low breakouts, Above Below moving average, or RSI overbought/oversold—and see how many of your chosen top 10/20/30/40 NYSE or NASDAQ names are bullish, neutral, or bearish. This tool gives you a quick view of broad-market strength or weakness so you can time trades, confirm trends, and spot hidden shifts in market sentiment. ▮Key Features ► Three Simple Modes High Low Index: counts stocks making new highs or lows over your lookback period Above Below MA: flags stocks trading above or below their moving average RSI Sentiment: marks overbought or oversold stocks and plots a small histogram ► Universe Selection Top 10, 20, 30, or 40 symbols from NYSE or NASDAQ Option to weight by market cap or treat all symbols equally ► Timeframe Choice Use your chart’s timeframe or any intraday, daily, weekly, or monthly resolution ► Histogram Smoothing Two optional moving averages on the sentiment bars Markers show when the faster average crosses above or below the slower one ► Ticker Table Optional on-chart table showing each ticker’s state in color Grid or single-row layout with adjustable text size and color settings ▮Inputs ► Mode and Lookback Pick High Low, Above Below MA, or RSI Sentiment Set lookback length (for example 10 bars) If using Above Below MA, choose the moving average type (EMA, SMA, etc.) ► Universe Setup Market: NYSE or NASDAQ Number of symbols: 10, 20, 30, or 40 Weights: on or off Timeframe: blank to match chart or pick any other ► Moving Averages on Histogram Enable fast and slow averages Set their lengths and types Choose colors for averages and markers ► Table Options Show or hide the symbol table Select text size: tiny, small, or normal Choose layout: grid or one-row Pick colors for bullish, neutral, and bearish cells Show or hide exchange prefixes ▮How to Read It ► Sentiment Bars Green means bullish Red means bearish Near zero means neutral ► Zero Line Separates bullish from bearish readings ► High Low Line (High Low mode only) Smooth ratio of highs versus lows over your lookback ► MA Crosses Fast MA above slow MA hints rising breadth Fast MA below slow MA hints falling breadth ► Ticker Table Each cell colored green, gray, or red for bull, neutral, or bear ▮Use Cases ► Confirm Market Trends Early warning when price makes highs but breadth is weak Catch rallies when breadth turns strong while price is flat ► Spot Sector Rotation Switch between NYSE and NASDAQ to see which group leads Watch tech versus industrial breadth to track money flow ► Filter Trade Signals Enter longs only when breadth is bullish Consider shorts when breadth turns negative ► Combine with Other Indicators Use RSI Sentiment with trend tools to spot overextended moves Add volume indicators in High Low mode for breakout confirmation ► Timeframe Analysis Daily for big-picture bias Intraday (15-min) for precise entries and exits
Penunjuk Pine Script®
oleh PtGambler
1
C&B Auto MK5C&B Auto MK5.2ema BullBear Overview The C&B Auto MK5.2ema BullBear is a versatile Pine Script indicator designed to help traders identify bullish and bearish market conditions across various timeframes. It combines Exponential Moving Averages (EMAs), Relative Strength Index (RSI), Average True Range (ATR), and customizable time filters to generate actionable signals. The indicator overlays on the price chart, displaying EMAs, a dynamic cloud, scaled RSI levels, bull/bear signals, and market condition labels, making it suitable for swing trading, day trading, or scalping in trending or volatile markets. What It Does This indicator generates bull and bear signals based on the interaction of two EMAs, filtered by RSI thresholds, ATR-based volatility, a 50/200 EMA trend filter, and user-defined time windows. It adapts to market volatility by adjusting EMA lengths and RSI thresholds. A dynamic cloud highlights trend direction or neutral zones, with candlestick coloring in neutral conditions. Market condition labels (current and historical) provide real-time trend and volatility context, displayed above the chart. How It Works The indicator uses the following components: EMAs: Two EMAs (short and long) are calculated on a user-selected timeframe (1, 5, 15, 30, or 60 minutes). Their crossover or crossunder triggers potential bull/bear signals. EMA lengths adjust based on volatility (e.g., 10/20 for volatile markets, 5/10 for non-volatile). Dynamic Cloud: The area between the EMAs forms a cloud, colored green for bullish trends, red for bearish trends, or a user-defined color (default yellow) for neutral zones (when EMAs are close, determined by an ATR-based threshold). Users can widen the cloud for visibility. RSI Filter: RSI is scaled to price levels and plotted on the chart (optional). Signals are filtered to ensure RSI is within volatility-adjusted bull/bear thresholds and not in overbought/oversold zones. ATR Volatility Filter: An optional filter ensures signals occur during sufficient volatility (ATR(14) > SMA(ATR, 20)). 50/200 EMA Trend Filter: An optional filter restricts bull signals to bullish trends (50 EMA > 200 EMA) and bear signals to bearish trends (50 EMA < 200 EMA). Time Filter: Signals are restricted to a user-defined UTC time window (default 9:00–15:00), aligning with active trading sessions. Market Condition Labels: Labels above the chart display the current trend (Bullish, Bearish, Neutral) and optionally volatility (e.g., “Bullish Volatile”). Up to two historical labels persist for a user-defined number of bars (default 5) to show recent trend changes. Visual Aids: Bull signals appear as green triangles/labels below the bar, bear signals as red triangles/labels above. Candlesticks in neutral zones are colored (default yellow). The indicator ensures compatibility with standard chart types (e.g., candlestick or bar charts) to produce realistic signals, avoiding non-standard types like Heikin Ashi or Renko. How to Use It Add to Chart: Apply the indicator to a candlestick or bar chart on TradingView. Configure Settings: Timeframe: Choose a timeframe (1, 5, 15, 30, or 60 minutes) to match your trading style. Filters: Enable/disable the ATR volatility filter to focus on high-volatility periods. Enable/disable the 50/200 EMA trend filter to align signals with the broader trend. Enable the time filter and set custom UTC hours/minutes (default 9:00–15:00). Cloud Settings: Adjust the cloud width, neutral zone threshold, color, and transparency. EMA Colors: Use default trend-based colors or set custom colors for short/long EMAs. RSI Display: Toggle the scaled RSI and its thresholds, with customizable colors. Signal Settings: Toggle bull/bear labels and set signal colors. Market Condition Labels: Toggle current/historical labels, include/exclude volatility, and adjust decay period. Interpret Signals: Bull Signal: A green triangle or “Bull” label below the bar indicates potential bullish momentum (EMA crossover, RSI above bull threshold, within time window, passing filters). Bear Signal: A red triangle or “Bear” label above the bar indicates potential bearish momentum (EMA crossunder, RSI below bear threshold, within time window, passing filters). Neutral Zone: Yellow candlesticks and cloud (if enabled) suggest a lack of clear trend; consider range-bound strategies or avoid trading. Market Condition Labels: Check labels above the chart for real-time trend (Bullish, Bearish, Neutral) and volatility status to confirm market context. Monitor Context: Use the cloud, RSI, and labels to assess trend strength and volatility before acting on signals. Unique Features Volatility-Adaptive EMAs: Automatically adjusts EMA lengths based on ATR to suit volatile or non-volatile markets, reducing manual configuration. Neutral Zone Detection: Uses an ATR-based threshold to identify low-trend periods, helping traders avoid choppy markets. Scaled RSI Visualization: Plots RSI and thresholds directly on the price chart, simplifying momentum analysis relative to price. Flexible Time Filtering: Supports precise UTC-based trading windows, ideal for day traders targeting specific sessions. Historical Market Labels: Displays recent trend changes (up to two) with a decay period, providing context for market shifts. 50/200 EMA Trend Filter: Aligns signals with the broader market trend, enhancing signal reliability. Notes Use on standard candlestick or bar charts to ensure accurate signals. Test the indicator on a demo account to optimize settings for your market and timeframe. Combine with other analysis (e.g., support/resistance, volume) for better decision-making. The indicator is not a standalone system; use it as part of a broader trading strategy. Limitations Signals may lag in fast-moving markets due to EMA-based calculations. Neutral zone detection may vary in extremely volatile or illiquid markets. Time filters are UTC-based; ensure your platform’s timezone settings align. This indicator is designed for traders seeking a customizable, trend-following tool that adapts to volatility and provides clear visual cues with robust filtering for bullish and bearish market conditions.
Penunjuk Pine Script®
oleh charleyRT