Mulakan

Cari dalam skrip untuk "donchian"

Speed IndicatorThe indicator showcases the Speed at which the prices change based on the set length. It does not show trend direction simply because Speed is a scalar quantity. It helps to identify when the prices are racing, slowing down, or in a range. The formula used for calculation is Speed = Total Distance Travelled / Time. Time is the period range that can be defined to set the lookback period. The length is calculated by finding the absolute value of the difference between the current and closing prices one period ago. The lengths are added for the defined Time, and the Total Distance Travelled by the price is calculated. The formula of 'current price' - price 'Time' periods ago is not used, which calculates the displacement of the price used in figuring the velocity . The Speed is then calculated using the defined formula. For example, in the last 20 days, a stock price moved a total of 15000 points, then the Speed of the price would be 750 points per day. Therefore the price is expected to be moving around 750 points, either up or down. There is also an application of the Donchian Channels to the calculated Speed. It helps to define a dynamic range of the Speed and easily visualize if the Speed is increasing, decreasing, or being stable. The range showcases a Speedometer , hence easing the interpretation of the Speed. Speed Range can also be customized for the Donchian channel. The contraction of the channels would occur when the Speed has been steady for some time, which would mean the price has not moved out from its range. The importance of the indicator is to identify when the prices have slowed down to enter positions safely, since entering positions during higher speeds would be like jumping onto a fast-moving train. Although, it is up to the user's risk appetite if they wish to enter during low speeds or high speeds. The basic strategy is to enter during slow speeds, hold as speed increases, exit as Speed starts to slow down for its highs. That is the basic idea but can be customized as per the user.
Penunjuk Pine Script®
oleh maksumit
2
Double_based_emaThe indicator shows two EMA. One superior and one inferior. The prices used to generate the EMA are diferent. For the superior EMA the price comes from the superior part of a Donchian Channel with the same period as the EMA. For the inferior EMA the price comes from the inferior part of the same Donchian Chanell. There is a superior limit and a inferior limit to this prices equal a 1/2 ATR with same period. The prices from superior part are those between the center of the channel and superior channel minus 1/2 ATR. The prices from inferior part are those between the center of the channel and inferior channel plus 1/2 ATR. This gives a litlle gain in speed to the EMA lecture and a second point of view as the indicator shows the superior EMA when the price is above the midle and shows the inferior EMA when the price is under the midle of the channel.
Penunjuk Pine Script®
oleh jacobfabris
TrendCalculusThis indicator makes visualising some of the core TrendCalculus algorithm's key information and features both fast and easy for casual analysis. Interpretation: a) The light blue channel is the lagged price channel calculated over the timeframe of your choosing for a period of N values. When the current price breaks out of this channel the previous price major high/low can be identified as a trend reversal. This helps in counting trend "waves" and is a rolling visual version of ideas I developed for counting Elliot Waves. For EW analysis, your mileage may vary depending on the asset inspected, but the chart allows you to clearly count waves on a particular scale of time (period) ignoring noise on other time scales. b) The green/red channel is a support/resistance indicator region that shows the relationship of the current price to the key pivot points on this time scale (period) and these make for good visual indication that the current trend is up (green), or down (red). You may find them helpful for identifying breakouts and placing stops - but this was not their original intention. The pink line is the mid point of closing values in the lagged price channel, and the orange line the mid point of closing values in the current price channel. About TrendCalculus (TC): TC is implemented in several languages including Lua, Scala and Python. The Lua implementation is the reference and has the most advanced functionality and delivers a powerful data processing tool for both multi-scale trend reversal detection, reversal labelling, as well as trend feature production - all useful things helping it to produce training data for machine learning models that detect trend changes in real time. This charting tool includes: (1) two consecutive lagged Donchian channels configured to a common period N, (2) the current price, and (3) the mid price of both Donchian channels. These calculations are all part of the TC codebase, and are brought to life in this charting tool. Motivation: By creating a TC charting tool - the machine learning model is swapped for *your eyes* and *your brain*. Using the same inputs as the machine, you can use this chart to learn to detect trend changes, and understand how time frame (long periods, short periods) affect your view of trend change. If you choose to use it to trade, or make investment decisions, do so at your own risk. This indicator does not deliver financial advice. TrendCalculus is the invention of Andrew Morgan, author of Mastering Spark for Data Science (2017). The original core TrendCalculus (TC) algorithm itself is published as open-source code on github under a GPL licence, and free to use and develop.
Penunjuk Pine Script®
oleh minkymorgan
7
supertrendHere is an extensive library on different variations of supertrend. Library "supertrend" supertrend : Library dedicated to different variations of supertrend supertrend_atr(length, multiplier, atrMaType, source, highSource, lowSource, waitForClose, delayed) supertrend_atr: Simple supertrend based on atr but also takes into consideration of custom MA Type, sources Parameters: length : : ATR Length multiplier : : ATR Multiplier atrMaType : : Moving Average type for ATR calculation. This can be sma, ema, hma, rma, wma, vwma, swma source : : Default is close. Can Chose custom source highSource : : Default is high. Can also use close price for both high and low source lowSource : : Default is low. Can also use close price for both high and low source waitForClose : : Considers source for direction change crossover if checked. Else, uses highSource and lowSource. delayed : : if set to true lags supertrend atr stop based on target levels. Returns: dir : Supertrend direction supertrend : BuyStop if direction is 1 else SellStop supertrend_bands(bandType, maType, length, multiplier, source, highSource, lowSource, waitForClose, useTrueRange, useAlternateSource, alternateSource, sticky) supertrend_bands: Simple supertrend based on atr but also takes into consideration of custom MA Type, sources Parameters: bandType : : Type of band used - can be bb, kc or dc maType : : Moving Average type for Bands. This can be sma, ema, hma, rma, wma, vwma, swma length : : Band Length multiplier : : Std deviation or ATR multiplier for Bollinger Bands and Keltner Channel source : : Default is close. Can Chose custom source highSource : : Default is high. Can also use close price for both high and low source lowSource : : Default is low. Can also use close price for both high and low source waitForClose : : Considers source for direction change crossover if checked. Else, uses highSource and lowSource. useTrueRange : : Used for Keltner channel. If set to false, then high-low is used as range instead of true range useAlternateSource : - Custom source is used for Donchian Chanbel only if useAlternateSource is set to true alternateSource : - Custom source for Donchian channel sticky : : if set to true borders change only when price is beyond borders. Returns: dir : Supertrend direction supertrend : BuyStop if direction is 1 else SellStop supertrend_zigzag(length, history, useAlternateSource, alternateSource, source, highSource, lowSource, waitForClose, atrlength, multiplier, atrMaType) supertrend_zigzag: Zigzag pivot based supertrend Parameters: length : : Zigzag Length history : : number of historical pivots to consider useAlternateSource : - Custom source is used for Zigzag only if useAlternateSource is set to true alternateSource : - Custom source for Zigzag source : : Default is close. Can Chose custom source highSource : : Default is high. Can also use close price for both high and low source lowSource : : Default is low. Can also use close price for both high and low source waitForClose : : Considers source for direction change crossover if checked. Else, uses highSource and lowSource. atrlength : : ATR Length multiplier : : ATR Multiplier atrMaType : : Moving Average type for ATR calculation. This can be sma, ema, hma, rma, wma, vwma, swma Returns: dir : Supertrend direction supertrend : BuyStop if direction is 1 else SellStop
Perpustakaan Pine Script®
oleh Trendoscope
5
[Mehrok]-Relative Strength IndexI have attempted to modify existing RSI Model and add some more features to it. Below are the features. DC High Line - Basis Donchian Channel concept i have added high line. Period can be selected in indicator options. Usage: Let's say i am tracking 90 day High period of RSI which will be shown with orange line on chart. If this orange line is breached it means RSI has made new high. Basis position of RSI we can determine if need to be in trade or exit. DC Low Line - Basis Donchian Channel concept i have added low line. Period can be selected in indicator options. Usage: Let's say i am tracking 90 day Low period of RSI which will be shown with aqua line on chart. If this aqua line is breached it means RSI has made new low. Basis position of RSI we can determine if we can enter the trade or not. DC MID Line - DC High + DC LOW / 2 gives a mid line which act as important resistance or support level. Buy and Sell Zone: I have added two dotted lines which clearly indicate 55 and 45 levels in RSI. Above 55 is considered as sell zone and below 45 as buy zone. You can change the settings basis your need. Mid Line: Indicator also show mid line at RSI 50 level which makes easier to understand if RSI is above mid line or below. It improves visualization of the indicator.
Penunjuk Pine Script®
oleh MrGaggi
1
[kai]MAYou can display various types of moving averages up to 5 lines. The following moving averages are available sma, vwma, ema, rma, wma, hma, ssma, jma, dema, tema, trima, t3, tma, lsma, kama, mama, frma, vwap, donchian The following moving averages are the original moving averages evma, rvma, wvma, terima, twrima 最大５本までの様々な種類の移動平均線を表示できます 以下の移動平均線が使用可能です sma, vwma, ema, rma, wma, hma, ssma, jma, dema, tema, trima, t3, tma, lsma, kama, mama, frma, vwap, donchian 以下の移動平均線はオリジナル移動平均線です evma, rvma, wvma, terima, twrima
Penunjuk Pine Script®
oleh xinolia
Bollinger Bands Trending Reverse StrategyWelcome to yet another script. This script was a lot easier since I was stuck for so long on the Donchian Channels one and learned so much from that one that I could use in this one. This code should be a lot cleaner compared to the Donchian Channels, but we'll leave that up to the pro's. This strategy has two entry signals, long = when price hits lower band, while above EMA, previous candle was bearish and current candle is bullish. Short = when price hits upper band, while below EMA, previous candle was bullish and current candle is bearish. Take profits are the opposite side's band(lower band for long signals, upper band for short signals). This means our take profit price will change per bar. Our stop loss doesn't change, it's the difference between entry price and the take profit target divided by the input risk reward.
Strategi Pine Script®
oleh conflixx95493
2
Efficient Work [LucF]█  OVERVIEW Efficient Work measures the ratio of price movement from close to close ( resulting work ) over the distance traveled to the high and low before settling down at the close ( total work ). The closer the two values are, the more Efficient Work approaches its maximum value of +1 for an up move or -1 for a down move. When price does not change, Efficient Work is zero. Higher values of Efficient Work indicate more efficient price travel between the close of two successive bars, which I interpret to be more significant, regardless of the move's amplitude. Because it measures the direction and strength of price changes rather than their amplitude, Efficient Work may be thought of as a sentiment indicator. █  CONCEPTS This oscillator's design stems from a few key concepts. Relative Levels Other than the centerline, relative rather than absolute levels are used to identify levels of interest. Accordingly, no fixed levels correspond to overbought/oversold conditions. Relative levels of interest are identified using:  • A Donchian channel (historical highs/lows).  • The oscillator's position relative to higher timeframe values.  • Oscillator levels following points in time where a divergence is identified. Higher timeframes Two progressively higher timeframes are used to calculate larger-context values for the oscillator. The rationale underlying the use of timeframes higher than the chart's is that, while they change less frequently than the values calculated at the chart's resolution, they are more meaningful because more work (trader activity) is required to calculate them. Combining the immediacy of values calculated at the chart's resolution to higher timeframe values achieves a compromise between responsiveness and reliability. Divergences as points of interest rather than directional clues A very simple interpretation of what constitutes a divergence is used. A divergence is defined as a discrepancy between any bar's direction and the direction of the signal line on that same bar. No attempt is made to attribute a directional bias to divergences when they occur. Instead, the oscillator's level is saved and subsequent movement of the oscillator relative to the saved level is what determines the bullish/bearish state of the oscillator. Conservative coloring scheme Several additive coloring conditions allow the bull/bear coloring of the oscillator's main line to be restricted to specific areas meeting all the selected conditions. The concept is built on the premise that most of the time, an oscillator's value should be viewed as mere noise, and that somewhat like price, it only occasionally conveys actionable information. █  FEATURES Plots  • Three lines can be plotted. They are named Main line , Line 2 and Line 3 . You decide which calculation to use for each line:    • The oscillator's value at the chart's resolution.    • The oscillator's value at a medium timeframe higher than the chart's resolution.    • The oscillator's value at the highest timeframe.    • An aggregate line calculated using a weighed average of the three previous lines (see the Aggregate Weights section of Inputs to configure the weights).  • The coloring conditions, divergence levels and the Hi/Lo channel always apply to the Main line, whichever calculation you decide to use for it.  • The color of lines 2 and 3 are fixed but can be set in the "Colors" section of Inputs.  • You can change the thickness of each line.  • When the aggregate line is displayed, higher timeframe values are only used in its calculation when they become available in the chart's history,   otherwise the aggregate line would appear much later on the chart. To indicate when each higher timeframe value becomes available,   a small label appears near the centerline.  • Divergences can be shown as small dots on the centerline.  • Divergence levels can be shown. The level and fill are determined by the oscillator's position relative to the last saved divergence level.  • Bull/bear markers can be displayed. They occur whenever a new bull/bear state is determined by the "Main Line Coloring Conditions".  • The Hi/Lo (Donchian) channel can be displayed, and its period defined.  • The background can display the state of any one of 11 different conditions.  • The resolutions used for the higher timeframes can be displayed to the right of the last bar's value.  • Four key values are always displayed in the Data Window (fourth icon down to the right of your chart):   oscillator values for the chart, medium and highest timeframes, and the oscillator's instant value before it is averaged. Main Line Coloring Conditions  • Nine different conditions can be selected to determine the bull/bear coloring of the main line. All conditions set to "ON" must be met to determine the bull/bear state.  • A volatility state can also be used to filter the conditions.  • When the coloring conditions and the filter do not allow for a bull/bear state to be determined, the neutral color is used. Signal  • Seven different averages can be used to calculate the average of the oscillator's value.  • The average's period can be set. A period of one will show the instant value of the oscillator,   provided you don't use linear regression or the Hull MA as they do not work with a period of one.  • An external signal can be used as the oscillator's instant value. If an already averaged external value is used, set the period to one in this indicator.  • For the cases where an external signal is used, a centerline value can be set. Higher Timeframes  • The two higher timeframes are named Medium timeframe and Highest timeframe . They can be determined using one of three methods:   • Auto-steps: the higher timeframes are determined using the chart's resolution. If the chart uses a seconds resolution, for example,    the medium and highest resolutions will be 15 and 60 minutes.   • Multiples: the timeframes are calculated using a multiple of the chart's resolution, which you can set.   • Fixed: the set timeframes do not change with the chart's resolution. Repainting  • Repainting can be controlled separately for the chart's value and the higher timeframe values.  • The default is a repainting chart value and non-repainting higher timeframe values. The Aggregate line will thus repaint by default,   as it uses the chart's value along with the higher timeframes values. Aggregate Weights  • The weight of each component of the Aggregate line can be set.  • The default is equal weights for the three components, meaning that the chart's value accounts for one third of the weight in the Aggregate. High Volatility  • This provides control over the volatility filter used in the Main line's coloring conditions and the background display.  • Volatility is determined to be high when the short-term ATR is greater than the long-term ATR. Colors  • You can define your own colors for all of the oscillator's plots.  • The default colors will perform well on both white and black chart backgrounds. Alerts  • An alert can be defined for the script. The alert will trigger whenever a bull/bear marker appears in the indicator's display.   The particular combination of coloring conditions and the display of bull/bear markers when you create the alert will thus determine when the alert triggers.   Once the alerts are created, subsequent changes to the conditions controlling the display of markers will not affect the existing alert(s).  • You can create multiple alerts from this script, each triggering on different conditions. Backtesting & Trading Engine Signal Line  • An invisible plot named "BTE Signal" is provided. It can be used as an entry signal when connected to the PineCoders Backtesting & Trading Engine as an external input.   It will generate an entry whenever a marker is displayed. █  NOTES • I do not know for sure if the calculations in Efficient Work are original. I apologize if they are not. • Because this version of Efficient Work only has access to OHLC information, it cannot measure the total distance traveled through all of a bar's ticks, but the indicator nonetheless behaves in a manner consistent with the intentions underlying its design. For Pine coders This code was written using the following standards:  • The PineCoders Coding Conventions for Pine .  • A modified version of the PineCoders MTF Oscillator Framework and MTF Selection Framework .
Penunjuk Pine Script®
oleh LucF
17
MTF Oscillator Framework [PineCoders]This framework allows Pine coders to quickly build a complete multi-timeframe oscillator from any calculation producing values around a centerline, whether the values are bounded or not. Insert your calculation in the script and you have a ready-to-publish MTF Oscillator offering a plethora of presentation options and features. █  HOW TO USE THE FRAMEWORK 1 — Insert your calculation in the `f_signal()` function at the top of the "Helper Functions" section of the script. 2 — Change the script's name in the `study()` declaration statement and the `alertcondition()` text in the last part of the "Plots" section. 3 — Adapt the default value used to initialize the CENTERLINE constant in the script's "Constants" section. 4 — If you want to publish the script, copy/paste the following description in your new publication's description and replace the "OVERVIEW" section with a description of your calculations. 5 — Voilà! ═════════════════════════════════════════════════════════════════════════ █  OVERVIEW This oscillator calculates a directional value of True Range. When a bar is up, the positive value of True Range is used. A negative value is used when the bar is down. When there is no movement during the bar, a zero value is generated, even if True Range is different than zero. Because the unit of measure of True Range is price, the oscillator is unbounded (it does not have fixed upper/lower bounds). True Range can be used as a metric for volatility, but by using a signed value, this oscillator will show the directional bias of progressively increasing/decreasing volatility, which can make it more useful than an always positive value of True Range. The True Range calculation appeared for the first time in J. Welles Wilder's New Concepts in Technical Trading Systems book published in 1978. Wilder's objective was to provide a reliable measure of the effective movement—or range—between two bars, to measure volatility. True Range is also the building block used to calculate ATR (Average True Range), which calculates the average of True Range values over a given period using the `rma` averaging method—the same used in the calculation of another of Wilder's remarkable creations: RSI. █  CONCEPTS This oscillator's design stems from a few key concepts. Relative Levels Other than the centerline, relative rather than absolute levels are used to identify levels of interest. Accordingly, no fixed levels correspond to overbought/oversold conditions. Relative levels of interest are identified using:  • A Donchian channel (historical highs/lows).  • The oscillator's position relative to higher timeframe values.  • Oscillator levels following points in time where a divergence is identified. Higher timeframes Two progressively higher timeframes are used to calculate larger-context values for the oscillator. The rationale underlying the use of timeframes higher than the chart's is that, while they change less frequently than the values calculated at the chart's resolution, they are more meaningful because more work (trader activity) is required to calculate them. Combining the immediacy of values calculated at the chart's resolution to higher timeframe values achieves a compromise between responsiveness and reliability. Divergences as points of interest rather than directional clues A very simple interpretation of what constitutes a divergence is used. A divergence is defined as a discrepancy between any bar's direction and the direction of the signal line on that same bar. No attempt is made to attribute a directional bias to divergences when they occur. Instead, the oscillator's level is saved and subsequent movement of the oscillator relative to the saved level is what determines the bullish/bearish state of the oscillator. Conservative coloring scheme Several additive coloring conditions allow the bull/bear coloring of the oscillator's main line to be restricted to specific areas meeting all the selected conditions. The concept is built on the premise that most of the time, an oscillator's value should be viewed as mere noise, and that somewhat like price, it only occasionally conveys actionable information. █  FEATURES Plots  • Three lines can be plotted. They are named Main line , Line 2 and Line 3 . You decide which calculation to use for each line:    • The oscillator's value at the chart's resolution.    • The oscillator's value at a medium timeframe higher than the chart's resolution.    • The oscillator's value at the highest timeframe.    • An aggregate line calculated using a weighed average of the three previous lines (see the Aggregate Weights section of Inputs to configure the weights).  • The coloring conditions, divergence levels and the Hi/Lo channel always apply to the Main line, whichever calculation you decide to use for it.  • The color of lines 2 and 3 are fixed but can be set in the "Colors" section of Inputs.  • You can change the thickness of each line.  • When the aggregate line is displayed, higher timeframe values are only used in its calculation when they become available in the chart's history,   otherwise the aggregate line would appear much later on the chart. To indicate when each higher timeframe value becomes available,   a small label appears near the centerline.  • Divergences can be shown as small dots on the centerline.  • Divergence levels can be shown. The level and fill are determined by the oscillator's position relative to the last saved divergence level.  • Bull/bear markers can be displayed. They occur whenever a new bull/bear state is determined by the "Main Line Coloring Conditions".  • The Hi/Lo (Donchian) channel can be displayed, and its period defined.  • The background can display the state of any one of 11 different conditions.  • The resolutions used for the higher timeframes can be displayed to the right of the last bar's value.  • Four key values are always displayed in the Data Window (fourth icon down to the right of your chart):   oscillator values for the chart, medium and highest timeframes, and the oscillator's instant value before it is averaged. Main Line Coloring Conditions  • Nine different conditions can be selected to determine the bull/bear coloring of the main line. All conditions set to "ON" must be met to determine the bull/bear state.  • A volatility state can also be used to filter the conditions.  • When the coloring conditions and the filter do not allow for a bull/bear state to be determined, the neutral color is used. Signal  • Seven different averages can be used to calculate the average of the oscillator's value.  • The average's period can be set. A period of one will show the instant value of the oscillator,   provided you don't use linear regression or the Hull MA as they do not work with a period of one.  • An external signal can be used as the oscillator's instant value. If an already averaged external value is used, set the period to one in this indicator.  • For the cases where an external signal is used, a centerline value can be set. Higher Timeframes  • The two higher timeframes are named Medium timeframe and Highest timeframe . They can be determined using one of three methods:   • Auto-steps: the higher timeframes are determined using the chart's resolution. If the chart uses a seconds resolution, for example,    the medium and highest resolutions will be 15 and 60 minutes.   • Multiples: the timeframes are calculated using a multiple of the chart's resolution, which you can set.   • Fixed: the set timeframes do not change with the chart's resolution. Repainting  • Repainting can be controlled separately for the chart's value and the higher timeframe values.  • The default is a repainting chart value and non-repainting higher timeframe values. The Aggregate line will thus repaint by default,   as it uses the chart's value along with the higher timeframes values. Aggregate Weights  • The weight of each component of the Aggregate line can be set.  • The default is equal weights for the three components, meaning that the chart's value accounts for one third of the weight in the Aggregate. High Volatility  • This provides control over the volatility filter used in the Main line's coloring conditions and the background display.  • Volatility is determined to be high when the short-term ATR is greater than the long-term ATR. Colors  • You can define your own colors for all of the oscillator's plots.  • The default colors will perform well on both white and black chart backgrounds. Alerts  • An alert can be defined for the script. The alert will trigger whenever a bull/bear marker appears in the indicator's display.   The particular combination of coloring conditions and the display of bull/bear markers when you create the alert will thus determine when the alert triggers.   Once the alerts are created, subsequent changes to the conditions controlling the display of markers will not affect the existing alert(s).  • You can create multiple alerts from this script, each triggering on different conditions. Backtesting & Trading Engine Signal Line  • An invisible plot named "BTE Signal" is provided. It can be used as an entry signal when connected to the PineCoders Backtesting & Trading Engine as an external input.   It will generate an entry whenever a marker is displayed. Look first. Then leap.
Penunjuk Pine Script®
oleh PineCoders
17
Wilder's Volatility Trailing Stop Strategy with various MA'sFor Educational Purposes. Results can differ on different markets and can fail at any time. Profit is not guaranteed. This only works in a few markets and in certain situations. Changing the settings can give better or worse results for other markets. This strategy is based on Wilder's Volatility System. It is an ATR trailing stop that is used for long term trends. This strategy focuses on the trailing stop alone and goes long and short only when it goes above or below the trailing line. It is similar to Donchian channels except it does not include the certain period channel breakout, only the trailing signal. This is only the trailing stop and an attempt to show how well it works standalone as Wilder described. In his book, Wilder recommends a multiplier of 2.8-3.1 and an ATR lookback of 7 periods along with a running moving average or otherwise known as Wilder's moving average. The calculation and programming part for the trailing stop varies everywhere. I opted to keep it as simple and accurate as I could think of and interpret from the book. The variations to these types of indicators are numerous unfortunately, but Wilder seems to be the original author of ATR and this ATR-based trailing stop. In his book he says to use the significant closing price or highest/lowest closing price for the calculation part but I also included the option of choosing the highest high and lowest low, and the option to choose various moving averages in case anyone wants to experiment. Comparing this and Donchian channels, it seems that a 2.5 multiplier is somewhat similar to the middle band of DCs and a 3.0 multiplier is somewhat similar to a double length middle band of DCs. It's hard to say which is the better trailing stop for a long term strategy. It's hard to beat the simplicity of DCs but maybe some might find a need for more inputs in a trailing stop or maybe an ATR based one like Wilder's can work better depending on what setting or strategy it's used in.
Strategi Pine Script®
oleh SparkyFlary
Noro's RiskDonchian StrategyThe strategy uses Donchian price channel . The channel is shown in blue lines. All other lines use Donchian channel too. The red line is the center line between the channel lines. The lime line is a few percent further away. The percentage is set by the user in the strategy settings. Lines Blue line - to open position using market stop order Lime line - take-profit (limit order) Red line - stop-loss (market stop order, trailing-stop) For - BTC /USD, XBT/USD, ETH/USD (need USD) - timeframe: 1h or 4h
Strategi Pine Script®
oleh ROBO_Trading
2
Percentile Trend Channel [DW]This is an experimental study designed to identify the trend of price action over a specified period using percentiles. First, the 50th percentile is calculated over the sampling period using the nearest rank method. I've found that this calculation is useful as a proxy for moving averages and other filters of that class. Next, the channel levels are calculated. In this study, there are three channel methods to choose from: -Percentile Donchian, which calculates Donchian Channels using the 100th and 0th percentile ranks -Percentile Keltner, which calculates the 50th percentile true range multiplied by a specified amount, then adds it to and subtracts it from the 50th percentile -Percentile Bollinger, which calculates 50th percentile standard deviation multiplied by a specified amount, then adds it to and subtracts it from the 50th percentile I also included a squeeze box option within this script, which is derived from my original Squeeze Box tool. This option detects squeezes in the specified channel's range by a specific percentage, and plots the channel values where the squeeze begins. The box also has a range multiplier, which can be used to expand or contract its range. Custom bar colors are included. The color scheme is based on the perceived trend over the specified sampling period.
Penunjuk Pine Script®
oleh DonovanWall
4
Breakout Scalper (Session)This is a twist on my on my Breakout Scalper strategy that limits trading to a user-configurable session Find the original "Continuous" version of the scalper here: The breakout scalper is based on "slow" and "fast" donchian periods. In this version, the "slow" donchian is in fact the Day's high/low. This important difference means that we will always be entering our trades at the day's high or low, so you are exposed to the price making new highs/lows but not to oscillations within the day's range. Furthermore, the scalper is modified to only enter trades after the start of the user-configured session. Any open trades are closed at the end of the user-configured session. The default session is set to 10:00 AM to 3:30 PM because that's when I like to trade.
Strategi Pine Script®
oleh ParCorn
3
BB After CloseThis is just an idea I am toying with. Enforce patience by triggering after the previous candle close. This way you enter on a confirmation. I like the way this pairs with a donchian channel, and also I just like donchian channels How I would trade this, say for a long dip buy: 1. Do not trade the first candle of the day. Close any open positions at the end of the day. 2. Generally speaking, Green/Yellow are bullish signals and Red/Orange are bearish signals 3. The diamond is the signal, and the square is the confirmation of the signal. So generally go with the square as your signal. 4. The cross (which looks like a plus sign) is the "happy" profit stop and the xcross (which is an 'x' sign) is the less happy loss stop. These stop symbols may show up frequently in strong trends - in these situations, use them as a sign of trend as well.
Penunjuk Pine Script®
oleh ParCorn
1
CM_Enhanced_Ichimoku Cloud-V5.2New version of the improved Ichimoku cloud Original by Chris Moody, great work. This indicator is a colorized Ichimoku with colors that you can change for any component. Not many changes between 5.1 and 5.2, I fixed some labels and the crossing detection, as well as the default colors. There's not much more left we can do without radically changing the original Ichimoku. We could implement full-multiframe but you can already do that by adding several times this indicator and changing the periods. Displayed components: Kijun-Sen: middle of the highest/lowest prices during the last 26 periods Tenkan-Sen: middle of the highest/lowest prices during the last 9 periods Senkou Span A (SSA) : average of Kijun and Tenkan, projected 26 periods ahead Senkou Span B (SSB): middle of the highest/lowest prices during the last 52 periods, and projected 26 periods ahead Chikou Span: the closing price projected 26 periods behind. Kumo: the cloud itself, the area between SSA/SSB. The script also provides indication of the crossings between Tenkan and Kijun, some trading strategies are based upon that. There is also a separate Kijun with its own period for those you'd like to have this information at another timeframe. I removed the third Kijun that was in version 5.1, I don't think it was widely used and made the configuration screen too crowded. If you really need this, take a look at Donchian indicators, the Kijun is basically a Donchian on 26 periods. Chris Moody Version (v5):
Penunjuk Pine Script®
oleh albert.callisto
11
Swing DistanceHello fellas, This simple indicator helps to visualize the distance between swings. It consists of two lines, the highest and the lowest line, which show the highest and lowest value of the set lookback, respectively. Additionally, it plots labels with the distance (in %) between the highest and the lowest line when there is a change in either the highest or the lowest value. Use Case: This tool helps you get a feel for which trades you might want to take and which timeframe you might want to use. Side Note: This indicator is not intended to be used as a signal emitter or filter! Best regards, simwai
Penunjuk Pine Script®
oleh simwai
RedK EVEREX - Effort Versus Results ExplorerRedK EVEREX is an experimental indicator that explores "Volume Price Analysis" basic concepts and Wyckoff law "Effort versus Result" - by inspecting the relative volume (effort) and the associated (relative) price action (result) for each bar - showing the analysis as an easy to read "stacked bands" visual. From that analysis, we calculate a "Relative Rate of Flow" - an easy to use +100/-100 oscilator that can be used to trigger a signal when a bullish or bearish mode is detected for a certain user-selected length of bars. Basic Concepts of VPA ------------------------------- (The topics of VPA & Wyckoff Effort vs Results law are too comprehensive to cover here - So here's just a very basic summary - please review these topics in detail in various sources available here in TradingView or on the web) * Volume Price Analysis (VPA) is the examination of the number of shares or contracts of a security that have been traded in a given period, and the associated price movement. By analyzing trends in volume in conjunction with price movements, traders can determine the significance of changes in price and what may unfold in the near future. * Oftentimes, high volumes of trading can infer a lot about investors’ outlook on a market or security. A significant price increase along with a significant volume increase, for example, could be a credible sign of a continued bullish trend or a bullish reversal. Adversely, a significant price decrease with a significant volume increase can point to a continued bearish trend or a bearish trend reversal. * Incorporating volume into a trading decision can help an investor to have a more balanced view of all the broad market factors that could be influencing a security’s price, which helps an investor to make a more informed decision. * Wyckoff's law "Effort versus results" dictates that large effort is expected to be accompanied with big results - which means that we should expect to see a big price move (result) associated with a large relative volume (effort) for a certain trading period (bar). * The way traders use this concept in chart analysis is to mainly look for imbalances or invalidation. for example, when we observe a large relative volume that is associated with very limited price change - that should trigger an early flag/warning sign that the current price trend is facing challenges and may be an early sign of "reversal" - this applies in both bearish and bullish conditions. on the other hand, when price starts to trend in a certain direction and that's associated with increasing volume, that can act as kind of validation, or a confirmation that the market supports that move. How does EVEREX work --------------------------------- * EVEREX inspects each bar and calculates a relative value for volume (effort) and "strength of price movement" (result) compared to a specified lookback period. The results are then visualized as stacked bands - the lower band represents the relative volume, the upper band represents the relative price strength - with clear color coding for easier analysis. * The scale of the band is initially set to 100 (each band can occupy up to 50) - and that can be changed in the settings to 200 or 400 - mainly to allow a "zoom in" on the bands. * Reading the resulting stacked bands makes it easier to see "balanced" volume/price action (where both bands are either equally strong, or equally weak), or when there's imbalance between volume and price (for example, a compression bar will show with high volume band and very small/tiny price action band) - another favorite pattern in VPA is the "Ease of Move", which will show as a relatively small volume band associated with a large "price action band" (either bullish or bearish) .. and so on. * a bit of a techie piece: why the use of a custom "Normalize()" function to calculate "relative" values in EVEREX? When we evaluate a certain value against an average (for example, volume) we need a mechanism to deal with "super high" values that largely exceed that average - I also needed a mechanism that mimics how a trader looks at a volume bar and decides that this volume value is super low, low, average, above average, high or super high -- the issue with using a stoch() function, which is the usual technique for comparing a data point against a lookback average, is that this function will produce a "zero" for low values, and cause a large distortion of the next few "ratios" when super large values occur in the data series - i researched multiple techniques here and decided to use the custom Normalize() function - and what i found is, as long as we're applying the same formula consistently to the data series, since it's all relative to itself, we can confidently use the result. Please feel free to play around with this part further if you like - the code is commented for those who would like to research this further. * Overall, the hope is to make the bar-by-bar analysis easier and faster for traders who apply VPA concepts in their trading What is RROF? -------------------------- * Once we have the values of relative volume and relative price strength, it's easy from there to combine these values into a moving index that can be used to track overall strength and detect reversals in market direction - if you think about it this a very similar concept to a volume-weighted RSI. I call that index the "Relative Rate of Flow" - or RROF (cause we're not using the direct volume and price values in the calculation, but rather relative values that we calculated with the proprietary "Normalize" function in the script. * You can show RROF as a single or double-period - and you can customize it in terms of smoothing, and signal line - and also utilize the basic alerts to get notified when a change in strength from one side to the other (bullish vs bearish) is detected * In the chart above, you can see how the RROF was able to detect change in market condition from Bearsh to Bullish - then from Bullish to Bearish for TSLA with good accuracy. Other Usage Options in EVEREX ------------------------------------ * I wrote EVEREX with a lot of flexibility and utilization in mind, while focusing on a clean and easy to use visual - EVEREX should work with any time frame and any instrument - in instruments with no volume data, only price data will be used. * You can completely hide the "EVEREX bands" and use EVEREX as a single or dual period strength indicator (by exposing the Bias/Sentiment plot which is hidden by default) - here's how this setup would look like - in this mode, you will basically be using EVEREX the same way you're using a volume-weighted RSI * or you can hide the bias/sentiment, and expose the Bulls & Bears plots (using the indicator's "Style" tab), and trade it like a Bull/Bear Pressure Index like this * you can choose Moving Average type for most plot elements in EVEREX, including how to deal with the Lookback averaging * you can set EVEREX to a different time frame than the chart * did i mention basic alerts in this v1.0 ?? There's room to add more VPA-specific alerts in future version (for example, when Ease-of-Move or Compression bars are detected...etc) - let me know if the comments what you want to see Final Thoughts -------------------- * EVEREX can be used for bar-by-bar VPA analysis - There are so much literature out there about VPA and it's highly recommended that traders read more about what VPA is and how it works - as it adds an interesting (and critical) dimension to technical analysis and will improve decision making * RROF is a "strength indicator" - it does not track price values (levels) or momentum - as you will see when you use it, the price can be moving up, while the RROF signal line starts moving down, reflecting decreasing strength (or otherwise, increasing bear strength) - So if you incorporate EVEREX in your trading you will need to use it alongside other momentum and price value indicators (like MACD, MA's, Trend Channels, Support & Resistance Lines, Fib / Donchian..etc) - to use for trade confirmation
Penunjuk Pine Script®
oleh RedKTrader
260
Ichimoku Clouds Strategy Long and ShortOverview: The Ichimoku Clouds Strategy leverages the Ichimoku Kinko Hyo technique to offer traders a range of innovative features, enhancing market analysis and trading efficiency. This strategy is distinct in its combination of standard methodology and advanced customization, making it suitable for both novice and experienced traders. Unique Features: Enhanced Interpretation: The strategy introduces weak, neutral, and strong bullish/bearish signals, enabling detailed interpretation of the Ichimoku cloud and direct chart plotting. Configurable Trading Periods: Users can tailor the strategy to specific market windows, adapting to different market conditions. Dual Trading Modes: Long and Short modes are available, allowing alignment with market trends. Flexible Risk Management: Offers three styles in each mode, combining fixed risk management with dynamic indicator states for versatile trade management. Indicator Line Plotting: Enables plotting of Ichimoku indicator lines on the chart for visual decision-making support. Methodology: The strategy utilizes the standard Ichimoku Kinko Hyo model, interpreting indicator values with settings adjustable through a user-friendly menu. This approach is enhanced by TradingView's built-in strategy tester for customization and market selection. Risk Management: Our approach to risk management is dynamic and indicator-centric. With data from the last year, we focus on dynamic indicator states interpretations to mitigate manual setting causing human factor biases. Users still have the option to set a fixed stop loss and/or take profit per position using the corresponding parameters in settings, aligning with their risk tolerance. Backtest Results: Operating window: Date range of backtests is 2023.01.01 - 2024.01.04. It is chosen to let the strategy to close all opened positions. Commission and Slippage: Includes a standard Binance commission of 0.1% and accounts for possible slippage over 5 ticks. Maximum Single Position Loss: -6.29% Maximum Single Profit: 22.32% Net Profit: +10 901.95 USDT (+109.02%) Total Trades: 119 (51.26% profitability) Profit Factor: 1.775 Maximum Accumulated Loss: 4 185.37 USDT (-22.87%) Average Profit per Trade: 91.67 USDT (+0.7%) Average Trade Duration: 56 hours These results are obtained with realistic parameters representing trading conditions observed at major exchanges such as Binance and with realistic trading portfolio usage parameters. Backtest is calculated using deep backtest option in TradingView built-in strategy tester How to Use: Add the script to favorites for easy access. Apply to the desired chart and timeframe (optimal performance observed on the 1H chart, ForEx or cryptocurrency top-10 coins with quote asset USDT). Configure settings using the dropdown choice list in the built-in menu. Set up alerts to automate strategy positions through web hook with the text: {{strategy.order.alert_message}} Disclaimer: Educational and informational tool reflecting Skyrex commitment to informed trading. Past performance does not guarantee future results. Test strategies in a simulated environment before live implementation
Strategi Pine Script®
oleh Skyrexio