Mulakan

Cari dalam skrip untuk "entry"

Waddah Attar Explosion and WaveTrend Oscillator combinedWaddah Attar Explosion by LazyBear and WaveTrend Oscillator by Krypt. All credits goes to LazyBear and Krypt, i have only done some combining with the two indicators, barcolors and BG colors to clarify entrys and exits. Combine with CM_Williams Vix_Fix, Super Guppy R1.0 by JustUncleL and you have a powerful tool. Barcolors to look for Aggressive Buy 1 = Lime Agressive Buy 2 = Aqua Buy = Green Sell 1 = Orange Sell 2 = Red This is my first try, so be nice to me :-)
Penunjuk Pine Script®
oleh gtfalmi
7
NG [Wave Period Oscillator]The WPO is a short-term oscillator that measures the buying and selling period of price cycles over a certain time interval. The leading oscillator indicates a rise in buying period when it moves above the zero line and a rise in selling period when it moves below the zero line. Trading Tactics Center line Crossover: a bullish center line crossover occurs when the WPO line moves above the zero level to turn positive. A bearish center line crossover occurs when the WPO line moves below the zero level to turn negative. When bulls are in control, the price rally begins and the average of the bull’s period T increases to drive the WPO line above the center line. A buy signal is subsequently triggered. When the bulls start to loose power, prices move sideways and the average period decreases. In this case, the WPO line may fl utter near the center line and cause false signals, whipsaws. To avoid the whipsaws occurring on the center line, the following trading tactics are proposed: Uptrend Tactic: During an ideal uptrend, the WPO does not reach the lower boundary -2 and usually rebounds from a higher level than -2. This means that the bulls have taken control earlier. Hence, a zero line crossover generates a buy signal. The WPO crosses the upper boundary at +2 then pulls back again below +2 to generate a sell signal. Sideways Tactic: During sideways, the WPO fluctuates between the lower and upper boundaries -2 and 2. This tactic is also used in an uptrend where corrections are strong enough to drive the WPO line below the lower boundary. Downtrend Tactic: During downtrends, the WPO fails to reach the upper boundary and oscillates between the 0 and -2 levels. The bears enter early indicating an obvious weakness in the market. Therefore, crossing the zero level generates a sell signal. Exit at Weakness: During uptrend reversals and downtrends, the WPO oscillates between the center line and the lower boundary -2. The bears are controlling the market and move in wide cycle periods while the bull’s strength is almost absent. An exit signal is triggered once the WPO crosses -2. When prices decline, the WPO may cross its extreme lower boundary at -2.7. Therefore, a swift exit signal is triggered once the WPO crosses -2. Re-Entry: During uptrend, the WPO crosses down the upper boundary level at +2 to generate a sell signal. Yet, it does not reach the zero line and the oscillator moves back toward the upper boundary. This case is considered as strength while a re-entry signal occurs at the +2 level crossover. The sell signal is generated when the WPO line crosses down the upper boundary.
Penunjuk Pine Script®
oleh NGBaltic
EurUsd Momentum Heiken AshiEURUSD Monthly and Weekly indicator that measures the slope between open and close. ***Works best on Heiken Ashi-as it smooths out the lines. -In essence, it is the same thing as Heiken Ashi but gives a better visual for entry beside "the candle is red so I should sell" -Method For Entry: **Look for a Higher Low to --->buy at indicator >=0 **Look for Lower High to ----->sell at indicator <=0 **Look at Heiken Ashi candle with support and resistance zones **Draw trend-lines such as channels, pennants, etc..
Penunjuk Pine Script®
oleh TheBulltrader
Daily ATR%If You are using a percentage of the Daily Average True Range in determining your stop placement, this quick indicator is for You. excerpt from investopedia.com/articles/trading/06/stopplacement.asp ATR % Stop Method The ATR% stop method can be used by any type of trader because the width of the stop is determined by the percentage of average true range (ATR). ATR is a measure of volatility over a specified period of time. The most common length is 14, which is also a common length for oscillators such as the relative strength index (RSI) and stochastics. A higher ATR indicates a more volatile market, while a lower ATR indicates a less volatile market. By using a certain percentage of ATR, you ensure that your stop is dynamic and changes appropriately with market conditions. For example, for the first four months of 2006, the GBP/USD average daily range was around 110 to 140 pips. A day trader may want to use a 10% ATR stop - meaning that the stop is placed 10% x ATR pips from the entry price.In this instance, the stop would be anywhere from 11 to 14 pips from your entry price. A swing trader might use 50% or 100% of ATR as a stop. In May and June of 2006, daily ATR was anywhere from 150 to 180 pips. As such, the day trader with the 10% stop would have stops from entry of 15 to 18 pips while the swing trader with 50% stops would have stops of 75 to 90 pips from entry.
Penunjuk Pine Script®
oleh netixen
1
Recovery StrategyDescription: The Recovery Strategy is a long-only trading system designed to capitalize on significant price drops from recent highs. It enters a position when the price falls 10% or more from the highest high over a 6-month lookback period and adds positions on further 2% drops, up to a maximum of 5 positions. Each trade is held for 6 months before exiting, regardless of profit or loss. The strategy uses margin to amplify position sizes, with a default leverage of 5:1 (20% margin requirement). All key parameters are customizable via inputs, allowing flexibility for different assets and timeframes. Visual markers indicate recent highs for reference. How It Works: Entry: Buys when the closing price drops 10% or more from the recent high (highest high in the lookback period, default 126 bars ~6 months). If already in a position, additional buys occur on further 2% drops (e.g., 12%, 14%, 16%, 18%), up to 5 positions (pyramiding). Exit: Each trade exits after its own holding period (default 126 bars ~6 months), regardless of profit or loss. No stop loss or take-profit is used. Margin: Uses leverage to control larger positions (default 20% margin, 5:1 leverage). The order size is a percentage of equity (default 100%), adjustable via inputs. Visualization: Displays blue markers (without text) at new recent highs to highlight reference levels. Inputs: Lookback Period for High Peak (bars): Number of bars to look back for the recent high (default: 126, ~6 months on daily charts). Initial Drop Percentage to Buy (%): Percentage drop from recent high to trigger the first buy (default: 10.0%). Additional Drop Percentage to Buy (%): Further drop percentage to add positions (default: 2.0%). Holding Period (bars): Number of bars to hold each position before selling (default: 126, ~6 months). Order Size (% of Equity): Percentage of equity used per trade (default: 100%). Margin for Long Positions (%): Percentage of position value covered by equity (default: 20%, equivalent to 5:1 leverage). Usage: Timeframe: Designed for daily charts (126 bars ~6 months). Adjust Lookback Period and Holding Period for other timeframes (e.g., 1008 hours for hourly charts, assuming 8 trading hours/day). Assets: Suitable for stocks, ETFs, or other assets with significant price volatility. Test thoroughly on your chosen asset. Settings: Customize inputs in the strategy settings to match your risk tolerance and market conditions. For example, lower Margin for Long Positions (e.g., to 10% for 10:1 leverage) to increase position sizes, but beware of higher risk. Backtesting: Use TradingView’s Strategy Tester to evaluate performance. Check the “List of Trades” for skipped trades due to insufficient equity or margin requirements. Risks and Considerations: No Stop Loss: The strategy holds trades for the full 6 months without a stop loss, exposing it to significant drawdowns in prolonged downtrends. Margin Risk: Leverage (default 5:1) amplifies both profits and losses. Ensure sufficient equity to cover margin requirements to avoid skipped trades or simulated margin calls. Pyramiding: Up to 5 positions can be open simultaneously, increasing exposure. Adjust pyramiding in the code if fewer positions are desired (e.g., change to pyramiding=3). Market Conditions: Performance depends on price drops and recoveries. Test on historical data to assess effectiveness in your market. Broker Emulator: TradingView’s paper trading simulates margin but does not execute real margin trading. Results may differ in live trading due to broker-specific margin rules. How to Use: Add the strategy to your chart in TradingView. Adjust input parameters in the settings panel to suit your asset, timeframe, and risk preferences. Run a backtest in the Strategy Tester to evaluate performance. Monitor open positions and margin levels in the Trading Panel to manage risk. For live trading, consult your broker’s margin requirements and leverage policies, as TradingView’s simulation may not match real-world conditions. Disclaimer: This strategy is for educational purposes only and does not constitute financial advice. Trading involves significant risk, especially with leverage and no stop loss. Always backtest thoroughly and consult a financial advisor before using any strategy in live trading.
Strategi Pine Script®
oleh tanmaychess
Deadband Hysteresis Supertrend [BackQuant]Deadband Hysteresis Supertrend A two-stage trend tool that first filters price with a deadband baseline, then runs a Supertrend around that baseline with optional flip hysteresis and ATR-based adverse exits. What this is A hybrid of two ideas: Deadband Hysteresis Baseline that only advances when price pulls far enough from the baseline to matter. This suppresses micro noise and gives you a stable centerline. Supertrend bands wrapped around that baseline instead of raw price. Flips are further gated by an extra margin so side changes are more deliberate. The goal is fewer whipsaws in chop and clearer regime identification during trends. How it works (high level) Deadband step — compute a per-bar “deadband” size from one of four modes: ATR, Percent of price, Ticks, or Points. If price deviates from the baseline by more than this amount, move the baseline forward by a fraction of the excess. If not, hold the line. Centered Supertrend — build upper and lower bands around the baseline using ATR and a user factor. Track the usual trailing logic that tightens a band while price moves in its favor. Flip hysteresis — require price to exceed the active band by an extra flip offset × ATR before switching sides. This adds stickiness at the boundary. Adverse exit — once a side is taken, trigger an exit if price moves against the entry by K × ATR . If you would like to check out the filter by itself: What it plots DBHF baseline (optional) as a smooth centerline. DBHF Supertrend as the active trailing band. Candle coloring by trend side for quick read. Signal markers 𝕃 and 𝕊 at flips plus ✖ on adverse exits. Inputs that matter Price Source — series being filtered. Close is typical. HL2 or HLC3 can be steadier. Deadband mode — ATR, Percent, Ticks, or Points. This defines the “it’s big enough to matter” zone. ATR Length / Mult (DBHF) — only used when mode = ATR. Larger values widen the do-nothing zone. Percent / Ticks / Points — alternatives to ATR; pick what fits your market’s convention. Enter Mult — scales the deadband you must clear before the baseline moves. Increase to filter more noise. Response — fraction of the excess applied to baseline movement. Higher responds faster; lower is smoother. Supertrend ATR Period & Factor — traditional band size controls; higher factor widens and flips less often. Flip Offset ATR — extra ATR buffer required to flip. Useful in choppy regimes. Adverse Stop K·ATR — per-trade danger brake that forces an exit if price moves K×ATR against entry. UI — toggle baseline, supertrend, signals, and bar painting; choose long and short colors. How to read it Green regime — candles painted long and the Supertrend running below price. Pullbacks toward the baseline that fail to breach the opposite band often resume higher. Red regime — candles painted short and the Supertrend running above price. Rallies that cannot reclaim the band may roll over. Frequent side swaps — reduce sensitivity by increasing Enter Mult, using ATR mode, raising the Supertrend factor, or adding Flip Offset ATR. Use cases Bias filter — allow entries only in the direction of the current side. Use your preferred triggers inside that bias. Trailing logic — treat the active band as a dynamic stop. If the side flips or an adverse K·ATR exit prints, reduce or close exposure. Regime map — on higher timeframes, the combination baseline + band produces a clean up vs down template for allocation decisions. Tuning guidance Fast markets — ATR deadband, modest Enter Mult (0.8–1.2), response 0.2–0.35, Supertrend factor 1.7–2.2, small Flip Offset (0.2–0.5 ATR). Choppy ranges — widen deadband or raise Enter Mult, lower response, and add more Flip Offset so flips require stronger evidence. Slow trends — longer ATR periods and higher Supertrend factor to keep you on side longer; use a conservative adverse K. Included alerts DBHF ST Long — side flips to long. DBHF ST Short — side flips to short. Adverse Exit Long / Short — K·ATR stop triggers against the current side. Strengths Deadbanded baseline reduces micro whipsaws before Supertrend logic even begins. Flip hysteresis adds a second layer of confirmation at the boundary. Optional adverse ATR stop provides a uniform risk cut across assets and regimes. Clear visuals and minimal parameters to adjust for symbol behavior. Putting it together Think of this tool as two decisions layered into one view. The deadband baseline answers “does this move even count,” then the Supertrend wrapped around that baseline answers “if it counts, which side should I be on and where do I flip.” When both parts agree you tend to stay on the correct side of a trend for longer, and when they disagree you get an early warning that conditions are changing. When the baseline bends and price cannot reclaim the opposite band , momentum is usually continuing. Pullbacks into the baseline that stall before the far band often resolve in trend. When the baseline flattens and the bands compress , expect indecision. Use the Flip Offset ATR to avoid reacting to the first feint. Wait for a clean band breach with follow through. When an adverse K·ATR exit prints while the side has not flipped , treat it as a risk event rather than a full regime change. Many users cut size, re-enter only if the side reasserts, and let the next flip confirm a new trend. Final thoughts Deadband Hysteresis Supertrend is best read as a regime lens. The baseline defines your tolerance for noise, the bands define your trailing structure, and the flip offset plus adverse ATR stop define how forgiving or strict you want to be at the boundary. On strong trends it helps you hold through shallow shakeouts. In choppy conditions it encourages patience until price does something meaningful. Start with settings that reflect the cadence of your market, observe how often flips occur, then nudge the deadband and flip offset until the tool spends most of its time describing the move you care about rather than the noise in between.
Penunjuk Pine Script®
oleh BackQuant
2
News Volatility Bracketing StrategyThis is a news-volatility bracketing strategy. Five seconds before a scheduled release, the strategy brackets price with a buy-stop above and a sell-stop below (OCO), then converts the untouched side into nothing while the filled side runs with a 1:1 TP/SL set the same distance from entry. Distances are configurable in USD or %, so it scales to the instrument and can run on 1-second data (or higher TF with bar-magnifier). The edge it’s trying to capture is the immediate, one-directional burst and liquidity vacuum that often follows market-moving news—entering on momentum rather than predicting direction. Primary risks are slippage/spread widening and whipsaws right after the print, which can trigger an entry then snap back to the stop.
Strategi Pine Script®
oleh mashinator347
P/B Ratio (Per Share) vs Median + Bollinger Band- 📝 This indicator highlights potential buying opportunities by analyzing the Price-to-Book (P/B) ratio in relation to Bollinger Bands and its historical median. - 🎯 The goal is to provide a visually intuitive signal for value-oriented entries, especially when valuation compression aligns with historical context. - 💡 Vertical green shading is applied when the P/B ratio drops below the lower Bollinger Band, which is calculated directly from the P/B ratio itself — not price. This condition often signals the ticker may be oversold. - 🟢 Lighter green appears when the ratio is below the lower band but above the median, suggesting a possible shorter-term entry with slightly more risk. - 🟢 Darker green appears when the ratio is both below the lower band and below the median, pointing to a potentially stronger, longer-term value entry. - ⚠️ This logic was tested using 1 and 2-day time frames. It may not be as helpful in longer time frames, as the financial data TradingView pulls in begins in Q4 2017. - ⚠️ Note: This script relies on financial data availability through TradingView. It may not function properly with certain tickers — especially ETFs, IPOs, or thinly tracked assets — where P/S ratio data is missing or incomplete. - ⚠️ This indicator will not guarantee successful results. Use in conjunction with other indicators and do your due diligence. - 🤖 This script was iteratively refined with the help of AI to ensure clean logic, minimalist design, and actionable signal clarity. - 📢 Idea is based on the script "Historical PE ratio vs median" by haribotagada - 💬 Questions, feedback, or suggestions? Drop a comment — I’d love to hear how you’re using it or what you'd like to see changed.
Penunjuk Pine Script®
oleh traceockinga
P/E Ratio vs Median + Bollinger Band- 📝 This indicator highlights potential buying opportunities by analyzing the Price-to-Earnings (P/E) ratio in relation to Bollinger Bands and its historical median. - 🎯 The goal is to provide a visually intuitive signal for value-oriented entries, especially when valuation compression aligns with historical context. - 💡 Vertical green shading is applied when the P/E ratio drops below the lower Bollinger Band, which is calculated directly from the P/E ratio itself — not price. This condition often signals the ticker may be oversold. - 🟢 Lighter green appears when the ratio is below the lower band but above the median, suggesting a possible shorter-term entry with slightly more risk. - 🟢 Darker green appears when the ratio is both below the lower band and below the median, pointing to a potentially stronger, longer-term value entry. - ⚠️ This logic was tested using 1 and 2-day time frames. It may not be as helpful in longer time frames, as the financial data TradingView pulls in begins in Q4 2017. - ⚠️ Note: This script relies on financial data availability through TradingView. It may not function properly with certain tickers — especially ETFs, IPOs, or thinly tracked assets — where P/S ratio data is missing or incomplete. - ⚠️ This indicator will not guarantee successful results. Use in conjunction with other indicators and do your due diligence. - 🤖 This script was iteratively refined with the help of AI to ensure clean logic, minimalist design, and actionable signal clarity. - 📢 Idea is based on the script "Historical PE ratio vs median" by haribotagada - 💬 Questions, feedback, or suggestions? Drop a comment — I’d love to hear how you’re using it or what you'd like to see changed.
Penunjuk Pine Script®
oleh traceockinga
P/S Ratio vs Median + Bollinger Band- 📝 This indicator highlights potential buying opportunities by analyzing the Price-to-Sales (P/S) ratio in relation to Bollinger Bands and its historical median. - 🎯 The goal is to provide a visually intuitive signal for value-oriented entries, especially when valuation compression aligns with historical context. - 💡 Vertical green shading is applied when the P/S ratio drops below the lower Bollinger Band, which is calculated directly from the P/S ratio itself — not price. This condition often signals the ticker may be oversold. - 🟢 Lighter green appears when the ratio is below the lower band but above the median, suggesting a possible shorter-term entry with slightly more risk. - 🟢 Darker green appears when the ratio is both below the lower band and below the median, pointing to a potentially stronger, longer-term value entry. - ⚠️ This logic was tested using 1 and 2-day time frames. It may not be as helpful in longer time frames, as the financial data TradingView pulls in begins in Q4 2017. - ⚠️ Note: This script relies on financial data availability through TradingView. It may not function properly with certain tickers — especially ETFs, IPOs, or thinly tracked assets — where P/S ratio data is missing or incomplete. - ⚠️ This indicator will not guarantee successful results. Use in conjunction with other indicators and do your due diligence. - 🤖 This script was iteratively refined with the help of AI to ensure clean logic, minimalist design, and actionable signal clarity. - 📢 Idea is based on the script "Historical PE ratio vs median" by @haribotagada - 💬 Questions, feedback, or suggestions? Drop a comment — I’d love to hear how you’re using it or what you'd like to see changed.
Penunjuk Pine Script®
oleh traceockinga
Trend Strength Confidence Gauge LiteMost traders don’t fail from bad charts — they fail from bad timing. Jumping in too early, bailing too soon, or freezing when the move finally comes. The Trend Strength Confidence Meter strips away the noise and highlights the three factors that matter most: Trend → The confirmed direction of the market Confidence → Concise tool clarity providing quick entries Strength → Strength Score shows the underlying battle between buyers and sellers How to Use It: Watch the Moving Average Ribbon (Hull MA) for a flip: green = uptrend, red = downtrend. Act only when ribbon color matches the Confidence thumbs-up. Confirm with Strength 3+ before entry. When trend, confidence, and strength align, you reduce risk and step in at tighter entry points — giving clarity for entries and conviction to hold through stronger moves. Advanced Indicators Made Simple — Provided by The AI Trading Desk
Penunjuk Pine Script®
oleh TheAITradingDesk
1
Bullish 1st Breakaway FVG Stop Loss This indicator provides a defined 3-tier stop loss placement when you want to trade the 1st Bullish Breakaway FVG strategy. The Bullish Breakaway Dual Session FVG indicator is an independent indicator that track all bullish breakaway candles, however this one only tracks the very 1st breakaway candle with a stop loss visual cue. Introduction of Bullish Breakaway Consolidated FVG: Inspired by the FVG Concept: This indicator is built on the Fair Value Gap (FVG) concept, with a focus on Consolidated FVG. Unlike traditional FVGs, this version only works within a defined session (e.g., ETH 18:00–17:00 or RTH 09:30–16:00). Bullish consolidated FVG & Bullish breakaway candle Begins when a new intraday low is printed. After that, the indicator searches for the 1st bullish breakaway candle, which must have its low above the high of the intraday low candle. Any candles in between are part of the consolidated FVG zone. Once the 1st breakaway forms, the indicator will shades the candle’s range (high to low). Session Reset: Occurs at session close. Choose your own session: use 930 to 1615 for RTH, 1800 to 1615 for ETH. (New York Time Zone) Repaint Behavior: If a new intraday (or intra-session) low forms, earlier breakaway patterns are wiped, and the system restarts from the new low. Product Optimization: This indicator is designed for CME future product with New York time zone. If you want to trade other products, please adjust your own time session. Entry: Long after the 1st Bullish Breakaway Candle in your active session. However, best position of long is executed by your own trading skill and edge. Stop Loss: ξ ξ: This is the 1st stop loss, it is 1 equal size of the breakaway candle below the low. ξξ: This is the 2nd stop loss, it is 2 equal sizes of the breakaway candle below the low. L: This is the 3rd stop loss, it is the intraday session low. Stop loss calculation: Assuming you enter at the high of the breakaway candle, the SL number is shown as the high minus the stop loss placement. Last Mention: If you don't see anything in the indicator, adjust your session to an active session only, and use Tradingview replay function. This indicator is a live indicator with repainting mechanism.
Penunjuk Pine Script®
oleh DeLeBlanc
2
Golden Cross Strategy & BacktesterGolden Cross Strategy & Backtester 📈🚀 Overview This script provides a complete backtesting environment for the classic Golden Cross trend-following strategy. It is designed to be simple, visual, and easy to use. 💪 The strategy operates on the following logic: 🔼 Long Entry: A "Buy" signal is generated when the short-term moving average (Short MA) crosses above the long-term moving average (Long MA). 🔽 Exit: The position is closed when the short-term moving average crosses back below the long-term moving average (a "Death Cross"). The background of the chart will be shaded green 🎨 during periods when the strategy is holding an active position. How to Use for Backtesting 🔬 This is a strategy script, which means its main purpose is to test the historical performance of this trading idea. Add this script to your chart. Open the "Strategy Tester" panel at the bottom of your chart. In the "Overview" and "Performance" tabs, you can see detailed results 📊, such as the Net Profit and Max Drawdown, to evaluate the strategy's effectiveness. Customization ⚙️ You can easily customize the strategy's parameters without editing the code. Click the Settings/Gear icon (⚙️) next to the script's name on your chart. In the "Inputs" tab, you can change: 📏 Short MA Length: The period for the fast-moving average (default is 50). 📏 Long MA Length: The period for the slow-moving average (default is 200). In the "Properties" tab, you can change: 💰 Initial Capital: The starting balance for the backtest. Feel free to test different settings to find what works best for your preferred asset and timeframe! Happy testing! 🎉
Strategi Pine Script®
oleh acdw12
Open Range Breakout Strategy With Multi TakeProfitHello everyone, For a while, I’ve been wanting to develop new scripts, but I couldn’t decide what to create. Eventually, I came up with the idea of coding traditional and well-known trading strategies—while adding modern features such as multi–take profit options. For the first strategy in this series, I chose the Open Range Strategy . For those unfamiliar with it, the Open Range Strategy is a trading approach where you define a specific time period at the beginning of a trading session—such as the first 15 minutes, 30 minutes, or 1 hour—and mark the highest and lowest prices within that range. These levels then act as reference points for potential breakouts: if the price breaks above the range, it may signal a long entry; if it breaks below, it may indicate a short entry. This method is popular among day traders for capturing early momentum in the market. Since this strategy is generally used as an intraday strategy , I added a Trade Session feature. This allows you to define the exact time window during which trades can be opened. Once the session ends, all positions are automatically closed, ensuring trades remain within your chosen intraday period. Even though it’s a relatively simple concept, I’ve come across many different variations of it. That’s why I created a highly customizable project. Under the Session Settings, you can select the time window you want to define as your range. Whether it’s the first 15-minute candle or the entire first hour, the choice is entirely yours. For stop-loss placement, there are two different options: Middle of the Range – The stop loss is placed at the midpoint between the high and low of the defined range, offering a balanced buffer for both bullish and bearish setups. Top/Bottom of the Range – The stop loss is placed just beyond the range’s high for short trades or just below the range’s low for long trades, providing a more conservative risk approach. I’ve always been a big fan of the multi take-profit feature, so I added two different take-profit targets to this project. Take profits are calculated based on a Risk-to-Reward Ratio, which you can adjust in the settings. You can also set different position sizes for each target, allowing you to scale out of trades in a way that suits your strategy. The result is a flexible, user-friendly strategy script that brings together a classic approach with modern risk management tools—ready to be tailored to your trading style
Strategi Pine Script®
oleh Milvetti
SMI Base-Trigger Bullish Re-acceleration (Higher High)Description What it does This indicator highlights a two-step bullish pattern using Stochastic Momentum Index (SMI) plus an ATR distance filter: 1. Base (orange) – Marks a momentum “reset.” A base prints when SMI %K crosses up through %D while %K is below the Base level (default -70). The base stores the base price and starts a waiting window. 2. Trigger (green) – Confirms momentum and price strength. A trigger prints only if, before the timeout window ends: • SMI %K crosses up through %D again, • %K is above the Trigger level (default -60), • Close > Base Price, and • Price has advanced at least Min ATR multiple (default 1.0× the 14-period ATR) above the base price. A dashed green line connects the base to the trigger. Why it’s useful It seeks a bullish divergence / reacceleration: momentum recovers from deeply negative territory, then price reclaims and exceeds the base by a volatility-aware margin. This helps filter out weak “oversold bounces.” Signals • Base ▲ (orange): Potential setup begins. • Trigger ▲ (green): Confirmation—momentum and price agree. Inputs (key ones) • %K Length / EMA Smoothing / %D Length: SMI construction. • Base when %K < (default -70): depth required for a valid reset. • Trigger when %K > (default -60): strength required on confirmation. • Base timeout (days) (default 100): maximum look-ahead window. • ATR Length (default 14) and Min ATR multiple (default 1.0): price must exceed the base by this ATR-scaled distance. How traders use it (example rules) • Entry: On the Trigger. • Risk: A common approach is a stop somewhere between the base price and a multiple of ATR below trigger; or use your system’s volatility stop. • Exits: Your choice—trend MA cross, fixed R multiple, or structure-based levels. Notes & tips • Works best on liquid symbols and mid-to-higher timeframes (reduce noise). • Increase Min ATR multiple to demand stronger price confirmation; tighten or widen Base/Trigger levels to fit your market. • This script plots signals only; convert to a strategy to backtest entries/exits.
Penunjuk Pine Script®
oleh suresh789
Canuck Trading Traders Strategy [Candle Entropy Edition]Canuck Trading Traders Strategy: A Unique Entropy-Based Day Trading System for Volatile Stocks Overview The Canuck Trading Traders Strategy is a custom, entropy-driven day trading system designed for high-volatility stocks like TSLA on short timeframes (e.g., 15m). At its core is CETP-Plus, a proprietary blended indicator that measures "order from chaos" in candle patterns using Shannon entropy, while embedding mathematical principles from EMA (recent weighting), RSI (momentum bias), ATR (volatility scaling), and ADX (trend strength) into a single score. This unique approach avoids layering multiple indicators, reducing complexity while improving timing for early trend detection and balanced long/short trades. CETP-Plus calculates a score from weighted candle ratios (body, upper/lower wicks) binned into a 3D histogram for entropy (low entropy = strong pattern). The score is adjusted with momentum, volatility, and trend multipliers for robust signals. Entries occur when the score exceeds thresholds (positive for longs, negative for shorts), with exits on reversals or stops. The strategy is automatic—no manual bias needed—and optimized for margin accounts with equal long/short treatment. Backtested on TSLA 15m (Jan 2015–Aug 2025), it targets +50,000% net profit (beating +1,478% buy-hold by 34x) with ~25,000 trades, 85-90% win rate, and <10% drawdown (with costs). Results vary by timeframe/period—test with your data and add slippage/commission for realism. Disclaimer: Past performance isn't indicative of future results; consult a financial advisor. Key Features CETP-Plus Indicator: Blends entropy with momentum/vol/trend for a single score, capturing bottoms/squeezes and trends without external tools. Automatic Balance: Positive scores trigger longs in bull trends, negative scores trigger shorts in bear trends—no user input for direction. Customizable Math: Tune weights and scales to adapt for different stocks (e.g., lower thresholds for NVDA's smoother trends). Risk Controls: Stop-loss, trailing stops, and score strength filter to minimize drawdowns in volatile markets like TSLA. Exit Debugging: Plots exit reasons ("Stop Loss", "Trail Stop", "CETP Exit") for analysis. Input Settings and Purposes All inputs are grouped in TradingView's Inputs tab for ease. Defaults are optimized for TSLA 15m day trading; adjust for other intervals or tickers (e.g., increase window for 1h, lower thresholds for NVDA). CETP-Plus Settings CETP Window (default: 5, min: 3, max: 20): Lookback bars for entropy/momentum. Short values (3-5) for fast sensitivity on short frames; longer (8-10) for stability on hourly+. CETP Bins per Dimension (default: 3, min: 3, max: 10): Histogram granularity for entropy. Low (3) for speed/simple patterns; high (5+) for detail in complex markets. Long Threshold (default: 0.15, min: 0.1, max: 0.8, step: 0.05): CETP score for long entries. Lower (0.1) for more longs in mild bull trends; higher (0.2) to filter noise. Short Threshold (default: -0.05, min: -0.8, max: -0.1, step: 0.05): CETP score for short entries. Less negative (-0.05) for more shorts in mild bear trends; more negative (-0.2) for strong signals. CETP Momentum Weight (default: 0.8, min: 0.1, max: 1.0, step: 0.1): Emphasizes momentum in score. High (0.9) for aggressive in fast moves; low (0.5) for entropy focus. Momentum Scale (default: 1.6, min: 0.1, max: 2.0, step: 0.1): Amplifies momentum. High (2.0) for short intervals; low (1.0) for stability. Body Ratio Weight (default: 1.2, min: 0.0, max: 2.0, step: 0.1): Weights candle body in entropy (trend focus). High (1.5) for strong trends; low (0.8) for wick emphasis. Upper Wick Ratio Weight (default: 0.8, min: 0.0, max: 2.0, step: 0.1): Weights upper wick (reversal noise). Low (0.5) to reduce false ups. Lower Wick Ratio Weight (default: 0.8, min: 0.0, max: 2.0, step=0.1): Weights lower wick. Low (0.5) to reduce false downs. Trade Settings Confirmation Bars (default: 0, min: 0, max: 5): Bars for sustained CETP signals. 0 for immediate entries (more trades); 1-2 for reliability (fewer but stronger). Min CETP Score Strength (default: 0.04, min: 0.0, max: 0.5, step: 0.05): Min absolute score for entry. Low (0.04) for more trades; high (0.15) for quality. Risk Management Stop Loss (%) (default: 0.5, min: 0.1, max: 5.0, step: 0.1): % from entry for stop. Tight (0.4) for quick exits; wide (0.8) for trends. ATR Multiplier (default: 1.5, min: 0.5, max: 3.0, step: 0.1): Scales ATR for stops/trails. Low (1.0) for tight; high (2.0) for room. Trailing ATR Mult (default: 3.5, min: 0.5, max: 5.0, step: 0.1): ATR mult for trails. High (4.0) for longer holds; low (2.0) for profits. Trail Start Offset (%) (default: 1.0, min: 0.5, max: 2.0, step: 0.1): % profit before trailing. Low (0.8) for early lock-in; high (1.5) for bigger moves. These settings enable customization for intervals/tickers while CETP-Plus handles automatic balancing. Risk Disclosure Trading involves significant risk and may result in losses exceeding your initial capital. The Canuck Trading Trader Strategy is provided for educational and informational purposes only. Users are responsible for their own trading decisions and should conduct thorough testing before using in live markets. The strategy’s high trade frequency requires reliable execution infrastructure to minimize slippage and latency.
Strategi Pine Script®
oleh ctoincanada
2
Contrarian Investor📌 Indicator Overview Name:Contrarian investor Purpose: Identify oversold or overbought conditions for simple reversal trades. Key Features: Uses the 200-period moving average (200MA) to determine the market trend. Uses RSI to detect oversold and overbought levels. Includes a signal interval filter to prevent excessive signals. 📌 Signal Conditions BUY (Reversal Buy) Price is below the 200MA RSI is below the oversold threshold (default: 30) When both conditions are met, a "BUY" label is plotted below the bar. SELL (Reversal Sell) Price is above the 200MA RSI is above the overbought threshold (default: 70) When both conditions are met, a "SELL" label is plotted above the bar. 📌 Parameters MA Length: Default 200 (used for trend detection) RSI Length: Default 14 RSI Oversold: Default 30 (trigger for BUY signals) RSI Overbought: Default 70 (trigger for SELL signals) Signal Interval (bars): Default 10 (prevents duplicate signals) 📌 How to Use Use the 200MA to confirm the trend direction. Wait for RSI to reach extreme levels (oversold or overbought). When a "BUY" or "SELL" label appears, consider a potential entry. For better accuracy, combine with support/resistance or price action confirmation. 📌 Notes This indicator is designed as a supplementary tool, not a standalone entry system. Adjust the signal interval based on your trading style (e.g., shorter for scalping, longer for swing trading). In strong trending markets, reversal signals may fail frequently, so additional confluence is recommended. You need to adjust the settings depending on the market conditions. This indicator is not intended for use during strong trending markets, such as after major economic news releases. It is best suited for range-bound markets and scalping within a few-dollar price range. 📌 インジケーターの概要 名前：Contrarian investor 目的：過剰に売られた/買われたタイミングでの逆張りシグナルを簡単に確認 特徴： 200MAを基準にトレンド方向を判定 RSIで売られすぎ・買われすぎを検出 過剰なシグナルを防ぐための「シグナル間隔制限」付き 📌 シグナルの条件 BUY（逆張り買い） 現在の価格が 200MAより下 RSIが 設定値（初期値30）以下 この条件で「BUY」ラベルがチャート下に表示されます。 SELL（逆張り売り） 現在の価格が 200MAより上 RSIが 設定値（初期値70）以上 この条件で「SELL」ラベルがチャート上に表示されます。 📌 パラメータ設定 MA期間：デフォルト200（200MAで長期トレンドを判定） RSI期間：デフォルト14 RSI売られすぎ：デフォルト30（BUYの発生条件） RSI買われすぎ：デフォルト70（SELLの発生条件） シグナル間隔（バー）：デフォルト10（重複シグナル防止） 📌 使い方 200MAでトレンド方向を確認 RSIが極端な水準に達したら逆張りシグナル発生 「BUY」または「SELL」のラベルが出たら検討 他のテクニカル（サポレジ・プライスアクション）と組み合わせると精度向上 📌 注意点 単独でのエントリー判断には使わず、補助的に活用するのが推奨 シグナル間隔は調整可能（例：スキャルピングなら短め、スイングなら長め） トレンドが強い相場では逆張りシグナルが連続して外れる可能性あり 相場環境によって設定を変える必要がある 指標発表後など強いトレンドが出る時ではなくレンジ相場で数ドル幅のスキャルピングをするのに向いている。
Penunjuk Pine Script®
oleh hrak22
Key Session LevelsKey Session Levels - Indicator Guide Created by: MecarderoAurum Why This Indicator Exists: An Overview The "Key Session Levels" indicator is a comprehensive tool for day traders that automatically plots the most critical price levels from the current premarket and the previous two full trading days. These levels are watched by countless traders and often act as significant areas of support and resistance. This indicator provides a clear, objective map of these key zones, helping traders anticipate potential turning points, identify areas of confluence, and make more informed trading decisions without having to manually draw and manage these lines every day. Features & How to Use Them This indicator plots several types of important historical levels on your chart. Each one is fully customizable. 1. Premarket Levels (PMH / PML) What they are: The highest (PMH) and lowest (PML) prices reached during the current day's premarket session (04:00 - 09:30 ET). Why they matter: The premarket high and low are the first significant levels established for the trading day. They often act as initial support or resistance once the market opens. How to use them: In the settings under "Premarket Levels," you can toggle the visibility of the PMH and PML, and customize their color, line style, and width. 2. Prior Day Levels (PDH / PDL / PDM / PDP) What they are: The key price points from the previous full trading day. PDH: Prior Day High PDL: Prior Day Low PDM: Prior Day Midpoint (the exact middle of the PDH and PDL) PDP: Prior Day Pivot (a classic pivot point calculation) Why they matter: These are often the most important levels for the current trading day. The market frequently tests the previous day's high and low. How to use them: Under the "Prior Day" settings, you can enable or disable each of these four levels and customize their appearance. 3. 2-Day Prior Levels (PDH2 / PDL2 / etc.) What they are: The same set of key levels (High, Low, Mid, Pivot) from two trading days ago. Why they matter: These levels can still be highly relevant, especially if the market is trading within a multi-day range or returning to test a significant prior level. How to use them: Under the "2-Day Prior" settings, you can customize the visibility and style of these levels. They are styled with more transparency by default to distinguish them from the more recent prior day's levels. 4. General Settings Days of History: This setting allows you to control how many past days of historical lines are kept on your chart. This is excellent for back-testing strategies and seeing how price has reacted to these levels in the past. Label Settings: You can customize the color and size of the on-chart labels (e.g., "PDH," "PML") for better visibility. Sample Strategy: The Key Level Rejection This strategy focuses on using the indicator's levels to identify potential reversals at key areas of support or resistance. Identify a Key Level: Watch as the price approaches a significant level plotted by the indicator, such as the Prior Day High (PDH) or the Premarket Low (PML). Look for Rejection: Do not trade simply because the price touches the level. Wait for a price action signal that confirms the level is holding. This could be a bearish engulfing candle or a shooting star pattern at a resistance level like PDH, or a bullish hammer or morning star pattern at a support level like PML. Entry: Once you see a clear rejection candle, enter a trade in the direction of the rejection. For a bearish rejection at the PDH, you would enter a short position. Stop-Loss: A logical place for a stop-loss is just above the high of the rejection candle (for a short trade) or just below the low of the rejection candle (for a long trade). This defines your risk clearly. Profit Target: Your first profit target could be the next key level plotted by the indicator. For example, if you shorted a rejection at the PDH, your first target might be the Premarket High (PMH) or the day's opening price.
Penunjuk Pine Script®
oleh MercaderoAurum
3
Zone Shift [ChartPrime]⯁ OVERVIEW Zone Shift is a dynamic trend detection tool that uses EMA/HMA-based bands to determine trend shifts and plot key reaction levels. It highlights trend direction through colored candles and marks important retests with visual cues to help traders stay aligned with momentum. ⯁ KEY FEATURES Dynamic EMA-HMA Band: Creates a three-line channel using the average of an EMA and HMA for the midline, and expands it using average candle range to form upper and lower bounds. This band visually adapts to market volatility. float ema = ta.ema(close, length) float hma = ta.hma(close, length-40) float dist = ta.sma(high-low, 200) float mid = math.avg(ema, hma) float top = mid + dist float bot = mid - dist Trend Detection (Band Cross Logic): Detects an uptrend when the Low crosses above the top band. Detects a downtrend when the High crosses below the bottom band. Bars change color to lime for uptrends and blue for downtrends. Trend Initiation Level: At the start of a new trend, the indicator locks in the extreme point (low for uptrend, high for downtrend) and plots a dashed horizontal level, serving as a potential retest zone. Trend Retest Signal: If price crosses back over the Trend Initiation level in the direction of the trend, a diamond label (⯁) is plotted at the retest point — confirming that price is revisiting a key shift level. Visual Band Layout: Midline: Dashed line shows the average of EMA and HMA. Top/Bottom: Solid lines showing dynamic thresholds above/below the midline. These help visualize compression, expansion, and possible breakout zones. Color-Based Candle Plotting: Candles are recolored in real time according to the current trend, allowing instant visual alignment with the market’s directional bias. Noise-Filtered Retests: To avoid repetitive signals, retests are only marked if they occur more than 5 bars after the previous one — filtering out minor fluctuations. ⯁ USAGE Use colored candles to align trades with the dominant trend. Treat dashed trendStart levels as important support/resistance zones. Watch for ⯁ diamond labels as confirmation of retests for continuation or entry. Use band boundaries to assess trend strength and volatility expansion. Combine with your existing setups to validate momentum and zone shifts. ⯁ CONCLUSION Zone Shift helps traders visually capture trend changes and key reaction points with precision. By combining band breakouts with real-time retest signals and trend-colored candles, this tool simplifies the process of reading market structure shifts and identifying high-confluence entry areas.
Penunjuk Pine Script®
oleh ChartPrime
13