Mulakan

Cari dalam skrip untuk "supertrend"

Supertrend GoldSignalThis indicator is a combination of two atr with numbers 1.6 and 0.8 The signals that are displayed on the chart are the points where both atr signaled at the same time (if distance = 0). -The atr1 check box is only for displaying atr signals with the number 1.6. You can choose the atr1 number in the slow multiplier section. -The atr2 check box is only for displaying atr signals with a number of 0.8. You can select the number of atr2 in the fast multiplier section. -Note: If the atr1 and atr2 checkboxes are off, only simultaneous signals will be displayed on the chart (that is, points where atr1 and atr2 signaled at the same time). -In the distance section, you can specify the distance between the atr1 and atr2 signals, if it is zero, it means that the atr1 and atr2 signals must be given on the same candle. For example, if the value of distance is 5, it means that atr1 and atr2 signals can have a distance of 5 candles. -The filter check box is for filtering signals using boxes 9, 26 and 52 in Ichimoku. At the points where we have signals, boxes of 9 candles, 26 candles and 52 candles are drawn, and for long signals, the bottom of the boxes must be equal, and for short signals, the top of the boxes must be equal,Signals that do not meet this condition are removed.
Penunjuk Pine Script®
oleh goldsignall
7
SuperTrend VolatilityThis indicator is actually composition of 3 indicator to one common one it based on super trend , OBV and volatility % range obv act as our source for the super trend to make it more sensitive you can control it as a regular super trend + the addition of volatility % range (volatility factor) so 1 is volatility range , can be from 0.1 to 5 depend on your liking. i set it here in this example of btc 4 hour chart to be 0.5 which is 1/2 of the volatility % range since it fitted better this particular asset . for stock i prefer 1 as my factor this indicator as i normally do have alert and signal inside. the aim of this indicator is to maximize trend on one hand and other to keep sensitivity high one of the problem with regular super trend that as we keep the we increase the trend to be longer it lose sensitivity . by this method that i show here i try to minimize that bad effect and make it both sensitive and more responsive. this is one of the reason i use a modified version of OBV as a source to it . for each asset that you use try to find the best fit so this model can work properly here apple with factor=1 as range on daily it better half of volatility range NIO gold 4 hour gold 1 hour
Penunjuk Pine Script®
oleh RafaelZioni
23
SuperTrend PZThis is more sensitive super trend you can control by the same way as you control any regular super trend also there is a special factor that you can use , from 0 to 20 to see if the fit become better I noramly give my code for free but since I do not like stupid folks to make as their own so i just give it as full functional one with signal and alerts but not as open source this can be use on any time frame and on any stuff that you wish let me know what you think
Penunjuk Pine Script®
oleh RafaelZioni
19
SuperTrend Ajeet v1.2This is my version of super trend Here I have used fibo to identify pullback candles Good signals are those which are preceded by a pullback green pullback for buy and a red pullback for sell For a further stronger signal look if there is a double arrow So normally I trade with a signal which has a double arrow and preceded by a pullback As you all know that timeframe to be used is 3 mins I personally use amibroker so here I have just tried to mirror that code in pine script - Ajeet Singh
Penunjuk Pine Script®
oleh STtraderr
43
OptionHawk1. What makes the script original? • Unique concept: It integrates a Keltner based custom supertrend with a multi-EMA energy visualization, ATR based multi target management, and on chart options (CALL/PUT) trade signals—creating a toolkit not found in typical public scripts. • Innovative use: Instead of off the shelf indicators, it reinvents them: • Keltner bands used as dynamic Supertrend triggers. • Fifteen EMAs layered for “energy” zones (bullish/bearish heatmaps). • ATR dynamically scales multi-TP levels and stop loss. These are creatively fused into a unified signal and automation engine. ________________________________________ 2. What value does it provide to traders? • Clear entries & exits: Labels for entry price/time, five TP levels, and SL structure eliminate guesswork. • Visualization & automation: Real-time bar coloring and energy overlays allow quick momentum reads. • Targeted to common pain points: Many traders struggle with manual TP/SL and entry timing—this automates that process. • Ready for real use: Just plug into intraday (e.g., 5 min) or swing setups; no manual calculations. Signals are actionable out of the box. ________________________________________ 3. Why invite only (worth paying)? • Proprietary fusion: Public indicators like Supertrend or EMA are common—but your layered use, ATR based scaling, and label logic are exclusive. • Auto-generated options format: Unique labeling for CALL/PUT, with graphical on chart signals, isn’t offered freely elsewhere. • Time-saver & edge-provider: Saves traders hours of configuration and enhances consistency—worth the subscription cost over piecing together mash ups. ________________________________________ 4. How does it work? • Signal backbone: Custom supertrend uses Keltner bands crossing with close for direction, filtered by trend direction EMAs. • Multi time logic: Trend defined by crossover of price over dynamic SMA thresholds built from ATR. • Energy bar-colors/EMAs: 15 fast EMAs color-coded green/red to instantly show momentum. • Entry logic: “Bull” when close crosses above supertrend; “Bear” when crosses below. • Risk management: SL set at previous bar; up to 5 ATR scaled targets (or percentage based). • Options formatted alerts: CALL/PUT labels with ₹¬currency values, embedded timestamp, SL/TP all printed on the chart. ________________________________________ 5. How should traders use it? • Best markets & timeframes: Ideal for intraday / low timeframe (1 15m) setups and 1 hour swing trades in equities, indices, options. • Conditions: Works best in trending or volatility driven sessions—visible via Keltner bands and EMA energy alignment. • Recommended combo: Use alongside volume filters or broader cycles; when supertrend & energy EMAs align, validation is stronger. ________________________________________ 6. Proof of effectiveness? • On chart visuals: Entry/exit labels, confirmed labels, TP and SL markers make past hits obvious. • Real trade examples: Highlighted both bull & bear setups with full profit realization or SL hits. • Performance is paint tested: Easy to showcase historic signals across multiple tickers. • Data-backed: Users can export chart data to calculate win rate and avg return per trade. ________________________________________ Summary Pitch: OptionHawk offers a holistic, execution-ready trading tool: 1. Proprietary blend of Keltner-supertrend and layered EMAs—beyond standard scripts. 2. Automates entries, multi-tier targets, SL, and options-format labels. 3. Visual energy overlays for quick momentum readings. 4. Use-tested in intraday and swing markets. 5. Installs on chart and works immediately—no setup complexity. It's not a public indicator package; it's a self-contained, plug and play trade catalyst—worth subscribing for active traders seeking clarity, speed, and structure in their decision-making. 6. While OptionHawk is designed for clarity and structure, no script can predict the market. Always use with discretion and proper risk management. --------------------------------------------------------------------------------------------------------------------- OptionHawk: A Comprehensive Trend-Following & Volatility-Adaptive Trading System The "OptionHawk" script is a sophisticated trading tool designed to provide clear, actionable signals for options trading by combining multiple technical indicators and custom logic. It aims to offer a holistic view of market conditions, identifying trend direction, momentum, and potential entry/exit points with dynamic stop-loss and take-profit levels. ________________________________________ 1. Why These Specific Indicators and Code Elements? The "OptionHawk" script is a strategic fusion of the Supertrend indicator (modified with Keltner Channels), a multi-EMA "Energy" ribbon, dynamic trend lines (based on SMA and ATR), a 100-period Trend Filter EMA, and comprehensive trade management logic (SL/TP). My reason and motivation for this mashup stem from a desire to create a robust system that accounts for various market aspects often overlooked by individual indicators: • Supertrend with Keltner Channels: The standard Supertrend is effective for trend identification but can sometimes generate whipsaws in volatile or ranging markets. By integrating Keltner Channels into the Supertrend calculation, the volatility measure becomes more adaptive, using the (high - low) range within the Keltner Channel for its ATR-like component. This aims to create a more responsive yet less prone-to-false-signals Supertrend. • Multi-EMA "Energy" Ribbon: This visually striking element, composed of 15 EMAs, provides a quick glance at short-to-medium term momentum and potential support/resistance zones. When these EMAs are stacked and moving in one direction, it indicates strong "energy" behind the trend, reinforcing the signals from other indicators. • Dynamic Trend Lines (SMA + ATR): These lines offer a visual representation of support and resistance that adapts to market volatility. Unlike static trend lines, their ATR-based offset ensures they remain relevant across different market conditions and asset classes, providing context for price action relative to the underlying trend. • 100-Period Trend Filter EMA: A longer-period EMA acts as a higher-timeframe trend filter. This is crucial for confirming the direction identified by the faster-acting Supertrend, helping to avoid trades against the prevailing broader trend. • Comprehensive Trade Management Logic: The script integrates automated calculation and display of stop-loss (SL) and multiple take-profit (TP) levels, along with trade confirmation and "TP Hit" labels. This is critical for practical trading, providing immediate, calculated risk-reward parameters that individual indicators typically don't offer. This combination is driven by the need for a multi-faceted approach to trading that goes beyond simple signal generation to include trend confirmation, volatility adaptation, and essential risk management. ________________________________________ 2. What Problem or Need Does This Mashup Solve? This mashup addresses several critical gaps that existing individual indicators often fail to fill: • Reliable Trend Identification in Volatile Markets: While Supertrend is good, it can be late or whipsaw. Integrating Keltner Channels helps it adapt to changing volatility, providing more reliable trend signals. • Confirmation of Signals: A common pitfall of relying on a single indicator is false signals. "OptionHawk" uses the multi-EMA "Energy" ribbon and the 100-period EMA to confirm the trend identified by the Keltner-Supertrend, reducing false entries. • Dynamic Support/Resistance & Trend Context: Static support and resistance levels can quickly become irrelevant. The dynamic SMA + ATR trend lines provide continually adjusting zones that reflect the current market's true support and resistance, giving traders a better understanding of price action within the trend. • Integrated Risk and Reward Management: Most indicators just give entry signals. This script goes a significant step further by automatically calculating and displaying clear stop-loss and up to five take-profit levels (either ATR-based or percentage-based). This is a vital component for structured trading, allowing traders to pre-define their risk and reward for each trade. • Visual Clarity and Actionable Information: Instead of requiring traders to layer multiple indicators manually, "OptionHawk" integrates them into a single, cohesive display with intuitive bar coloring, shape plots, and informative labels. This reduces cognitive load and presents actionable information directly on the chart. In essence, "OptionHawk" provides a more comprehensive, adaptive, and actionable trading framework than relying on isolated indicators. ________________________________________ 3. How Do the Components Work Together? The various components of "OptionHawk" interact in a synergistic and often sequential manner to generate signals and manage trades: • Keltner-Supertrend as the Primary Signal Generator: The supertrend function, enhanced by keltner_channel, is the core of the system. It identifies potential trend reversals and continuation signals (bullish/bearish crosses of the supertrendLine). The sensitivity and factor inputs directly influence how closely the Supertrend follows price and its responsiveness to volatility. • Multi-EMA "Energy" Ribbon for Momentum and Confirmation: The 15 EMAs (from ema1 to ema15) are plotted to provide a visual representation of short-term momentum. When the price is above these EMAs and they are spread out and pointing upwards, it suggests strong bullish "energy." Conversely, when price is below them and they are pointing downwards, it indicates bearish "energy." This ribbon serves as a simultaneous visual confirmation for the Supertrend signals; a buy signal from Supertrend is stronger if the EMA ribbon is also indicating upward momentum. • Dynamic Trend Lines for Context and Confirmation: The sma_high and sma_low lines, incorporating ATR, act as dynamic support and resistance. The trend variable, determined by price crossing these lines, provides an overarching directional bias. This component works conditionally with the Supertrend; a bullish Supertrend signal is more potent if the price is also above the sma_high (indicating an uptrend). • 100-Period Trend Filter EMA for Macro Trend Confirmation: The ema100 acts as a macro trend filter. Supertrend signals are typically considered valid if they align with the direction of the ema100. For example, a "BUY" signal from the Keltner-Supertrend is ideally taken only if the price is also above the ema100, signifying that the smaller trend aligns with the larger trend. This is a conditional filter. • Trade Confirmation and SL/TP Logic (Sequential and Conditional): • Once a bull or bear signal is generated by the Keltner-Supertrend, the tradeSignalCall or tradeSignalPut is set to true. • A confirmation step then occurs for a "BUY" signal, the script checks if the close of the next bar is higher than the entry bar's close. For a "SELL" signal, it checks if the close of the next bar is lower. This is a sequential confirmation step aimed at filtering out weak signals. • Upon a confirmed signal, the stop-loss (SL) is immediately set based on the previous bar's low (for calls) or high (for puts). • Multiple take-profit (TP) levels are calculated and stored in arrays. These can be based on a fixed percentage or dynamic ATR multiples, based on user input. • The TP HIT logic continuously monitors price action simultaneously against these pre-defined target levels, displaying labels when a target is reached. The SL HIT logic similarly monitors for a stop-loss breach. In summary, the Supertrend generates the initial signal, which is then confirmed by the dynamic trend lines and the 100-period EMA, and visually reinforced by the EMA "Energy" ribbon. The trade management logic then takes over, calculating and displaying vital risk-reward parameters. ________________________________________ 4. What is the Purpose of the Mashup Beyond Simply Merging Code? The purpose of "OptionHawk" extends far beyond merely combining different indicator codes; it's about creating a structured and informed decision-making process for options trading. The key strategic insights and functionalities added by combining these elements are: • Enhanced Signal Reliability and Reduced Noise: By requiring multiple indicators to align (e.g., Keltner-Supertrend signal confirmed by EMA trend filter and dynamic trend lines), the script aims to filter out false signals and whipsaws that commonly plague individual indicators. This leads to higher-probability trade setups. • Adaptive Risk Management: The integration of ATR into both the Supertrend calculation and the dynamic stop-loss/take-profit levels makes the entire system adaptive to current market volatility. This means stop-losses and targets are not static but expand or contract with the market's price swings, promoting more realistic risk management. • Clear Trade Entry and Exit Framework: The script provides a complete trading plan with each signal: a clear entry point, a precise stop-loss, and multiple cascading take-profit levels. This holistic approach empowers traders to manage their trades effectively from initiation to conclusion, rather than just identifying a potential entry. • Visual Confirmation of Market Strength: The "Energy" ribbon and dynamic trend lines provide an immediate visual understanding of the market's momentum and underlying trend strength, helping traders gauge conviction behind a signal. • Improved Backtesting and Analysis: By combining these elements into one script, traders can more easily backtest a comprehensive strategy rather than trying to manually combine signals from multiple overlaying indicators, leading to more accurate strategy analysis. • Suitability for Options Trading: Options contracts are highly sensitive to price movement and volatility. This script's focus on confirmed trend identification, dynamic volatility adaptation, and precise risk management makes it particularly well-suited for the nuanced demands of options trading, where timing and defined risk are paramount. ________________________________________ 5. What New Functionality or Insight Does Your Script Offer? "OptionHawk" offers several new functionalities and insights that significantly enhance decision-making, improve accuracy, and provide clearer signals and better timing for traders: • "Smart" Supertrend: By basing the Supertrend's volatility component on the Keltner Channel's range instead of a simple ATR, the Supertrend becomes more sensitive to price action within its typical bounds while still adapting to broader market volatility. This can lead to earlier and more relevant trend change signals. • Multi-Confirmation System: The script doesn't just provide a signal; it layers multiple confirmations (Keltner-Supertrend, multi-EMA "Energy" coloration, dynamic trend lines, and the 100-period EMA). This multi-layered validation significantly improves the accuracy of signals by reducing the likelihood of false positives. • Automated and Dynamic Risk-Reward Display: This is a major functionality enhancement. The automatic calculation and clear display of stop-loss and five distinct take-profit levels (based on either ATR or percentage) directly on the chart, along with "TP HIT" and "SL HIT" labels, streamline the trading process. Traders no longer need to manually calculate these crucial levels, leading to enhanced decision-making and better risk management. • Visual Trend "Energy" and Momentum: The vibrant coloring of the multi-EMA ribbon based on price relative to the EMA provides an intuitive and immediate visual cue for market momentum and "energy." This offers an insight into the strength of the current move, which isn't available from single EMA plots. • Post-Signal Confirmation: The "Confirmation" label appearing on the bar after a signal, if the price continues in the signaled direction, adds an extra layer of real-time validation. This helps to improve signal timing by waiting for initial follow-through. • Streamlined Options Trading Planning: For options traders, having clear entry prices, stop-losses, and multiple target levels directly annotated on the chart is invaluable. It helps in quickly assessing potential premium movements and managing positions effectively. In essence, "OptionHawk" transitions from a collection of indicators to a semi-automated trading assistant, providing a comprehensive, visually rich, and dynamically adaptive framework for making more informed and disciplined trading decisions. ---------------------------------------------------------------------------------------------------------------- Performance & Claims 1. What is the claimed performance of the script or strategy? Answer: The script does not claim any specific performance metrics (e.g., win rate, profit factor, percentage gains). It's an indicator designed to identify potential buy/sell signals and target/stop-loss levels. The labels it generates ("BUY CALL," "BUY PUT," "TP HIT," "SL HIT") are informational based on its internal logic, not a representation of actual trading outcomes. 2. Is there any proof or backtesting to support this claim? Answer: No, the provided code does not include any backtesting functionality or historical performance proof. As an indicator, it simply overlays visual signals on the chart. To obtain backtesting results, the logic would need to be implemented as a Pine Script strategy with entry/exit rules and commission/slippage considerations. 3. Are there any unrealistic or exaggerated performance expectations being made? Answer: The script itself does not make any performance expectations. It avoids quantitative claims. However, if this script were presented to users with implied promises of profit based solely on the visual signals, that would be unrealistic. 4. Have you clearly stated the limitations of the performance data (e.g., “based on backtesting only”)? Answer: There is no statement of performance data or its limitations because the script doesn't generate performance data. 5. Do you include a disclaimer that past results do not guarantee future performance? Answer: No, the script does not include any disclaimers about past or future performance. This is typically found in accompanying documentation or marketing materials for a trading system, not within the indicator's code itself. ________________________________________ Evidence & Transparency 6. How are your performance results measured (e.g., profit factor, win rate, Sharpe ratio)? Answer: Performance results are not measured by this script. It's an indicator. 7. Are these results reproducible by others using the same script and settings? Answer: The visual signals and calculated levels (Supertrend line, EMAs, target/SL levels) generated by the script are reproducible on TradingView when applied to the same instrument, timeframe, and with the same input settings. However, the actual trading results (profit/loss) are not generated or reproducible by this indicator. 8. Do you include enough data (charts, equity curves, trade logs) to support your claims? Answer: No, the script does not include or generate equity curves or trade logs. It provides visual labels on the chart, which can be seen as a form of "data" to support the signal generation, but not the performance claims (as none are made by the code). ________________________________________ Future Expectations 9. Are you making any predictions about future market performance? Answer: No, the script does not make any explicit predictions about future market performance. Its signals are based on historical price action and indicator calculations. 10. Have you stated clearly that the future is fundamentally uncertain? Answer: No, the script does not contain any statements about the uncertainty of the future. 11. Are forward-looking statements presented with caution and appropriate language? Answer: The script does not contain any forward-looking statements beyond the visual signals it generates based on real-time data. ________________________________________ Risk & Disclosure 12. Have you disclosed the risks associated with using your script or strategy? Answer: No, the script does not include any risk disclosures. This is typically found in external documentation. 13. Do you explain that trading involves potential loss as well as gain? Answer: No, the script does not contain any explanation about the potential for loss in trading. ________________________________________ Honesty & Integrity 14. Have you avoided hype words like “guaranteed,” “foolproof,” or “no losses”? Answer: Yes, the script itself avoids these hype words. The language used within the code is technical and describes the indicator's logic. 15. Is your language grounded and realistic rather than promotional? Answer: Yes, the language within the provided Pine Script code is grounded and realistic as it pertains to the technical implementation of an indicator. 16. Are you leaving out any important details that might mislead users (e.g., selective performance snapshots)? Answer: From the perspective of the code itself, no, it's not "leaving out" performance details because it's not designed to generate them. However, if this indicator were to be presented as a "strategy" that implies profitability without accompanying disclaimers, backtesting results, and risk disclosures, then that external presentation could be misleading. The script focuses on signal generation and visual representation. ⚠️ Disclaimer: This indicator is for informational and educational purposes only. It does not guarantee any future results or performance. All trading involves risk. Please assess your own risk tolerance and consult a licensed financial advisor if needed. Past performance does not indicate future returns.
Penunjuk Pine Script®
oleh ShubhamWaddalwar
D-BoT Alpha Volume SpikeHello traders, Let me explain the code and provide an example of how to trade using this indicator. The code you provided is a Pine Script indicator that combines multiple technical indicators, such as Supertrend, ADX, RSI, and MFI, to generate buy and sell signals. Here's a breakdown of the code: User Settings: The user can adjust parameters like overbought_limit, oversold_limit, volume_multiplier, volume_ma_length, volume_spike_multiple, lookback_period, and use_extremities_confirmation according to their preference. Calculate Supertrend: The Supertrend indicator is calculated using three different ATR lengths (supertrend_atr_period1, supertrend_atr_period2, supertrend_atr_period3) and corresponding factors (supertrend_factor1, supertrend_factor2, supertrend_factor3). The supertrend_value1, supertrend_value2, and supertrend_value3 represent the Supertrend values, while trend_direction1, trend_direction2, and trend_direction3 indicate the trend direction (negative for downtrend, positive for uptrend). Candle calculations: The high and low values are checked to identify bullish and bearish candles based on specific conditions. Volume Spikes: Volume spikes are detected by comparing the current volume with a median volume over a specified lookback period. If the volume exceeds a certain multiple of the median volume and the DI+ value is greater than the DI- value, an "up" signal is generated. Similarly, if the DI- value is greater than the DI+ value, a "down" signal is generated. Additional Filters (RSI and MFI): Relative Strength Index (RSI) and Money Flow Index (MFI) are used as additional filters. The RSI and MFI parameters can be adjusted according to the user's preference. The signals generated by the volume spikes are filtered based on RSI and MFI conditions. Plotting: The indicator plots shapes (triangles) to represent buy and sell signals. The Supertrend lines are plotted using different colors and transparency levels based on the distance from the current price. The "bodyMiddle" plot is used for filling the area between the Supertrend lines. Example Trade Scenario: Let's consider an example trade scenario using this indicator: When the indicator generates an "up" signal (trendBuy = true), indicating a potential bullish trend, and all the confirmation conditions (RSI, MFI, Supertrend) are met, you can consider opening a long position. Conversely, when the indicator generates a "down" signal (trendSell = true), indicating a potential bearish trend, and all the confirmation conditions are met, you can consider opening a short position. Remember, this is just an example, and it's crucial to perform thorough analysis and consider other factors before making trading decisions. It's recommended to backtest the strategy, assess risk management, and apply appropriate position sizing techniques. Please note that the code provided is a simplified version, and there might be additional factors and considerations specific to your trading strategy that are not included in this code. *******"I have also reviewed the following indicators, and the volume calculation approaches of my friends have been very helpful in creating this indicator: "Volume Spikes " © tradeforopp and "Volume Spikes & Growing Volume Signals With Alerts & Scanner" © FriendOfTheTrend."*******
Penunjuk Pine Script®
oleh Genesis-Trader
4
Trend Following Bundle [ActiveQuants]The Trend Following Bundle indicator is a comprehensive toolkit designed to equip traders with a suite of essential technical analysis tools focused on identifying , confirming , and capitalizing on market trends . By bundling popular indicators like Moving Averages , MACD , Supertrend , ADX , ATR , OBV , and the Choppiness Index into a single script, it streamlines chart analysis and enhances strategy development. This bundle operates on the principle that combining signals from multiple, complementary indicators provides a more robust view of market trends than relying on a single tool. It integrates: Trend Direction: Moving Averages, Supertrend. Momentum: MACD. Trend Strength: ADX. Volume Pressure: On Balance Volume (OBV). Volatility: Average True Range (ATR). Market Condition Filter: Choppiness Index (Trend vs. Range). By allowing users to selectively enable, customize, and view these indicators (potentially across different timeframes), the bundle facilitates nuanced and layered trend analysis. █ KEY FEATURES All-in-One Convenience: Access multiple core trend-following indicators within a single TradingView script slot. Modular Design: Easily toggle each individual indicator (MAs, MACD, Supertrend, etc.) On or Off via the settings menu to customize your chart view. Extensive Customization: Fine-tune parameters (lengths, sources, MA types, colors, etc.) for every included indicator to match your trading style and the specific asset. Multi-Timeframe (MTF) Capability: Configure each indicator component to analyze data from a different timeframe than the chart's, allowing for higher-level trend context. Integrated Alerts: Pre-built alert conditions for key events like Moving Average crossovers , MACD signals , Supertrend flips , and Choppiness Index threshold crosses . Easily set up alerts through TradingView's alert system. When configuring your alerts in TradingView, pay close attention to the trigger option: - Setting it to " Only Once " will trigger the alert the first time the condition is met, which might happen during an unclosed bar (intra-bar). This alert instance will then cease. - Setting it to " Once Per Bar Close " will trigger the alert only after a bar closes if the condition was met on that finalized bar. This ensures signals are based on confirmed data and allows the alert to potentially trigger again on subsequent closing bars if the condition persists or reoccurs. Use this option for signals based on confirmed, closed-bar data. MA Smoothing & Bands (Optional): Apply secondary smoothing or Bollinger Bands directly to the Fast and Slow Moving Averages for advanced analysis. █ USER INPUTS Fast MA: On/Off: Enables/Disables the Fast Moving Average plot and related smoothing/bands. Type: Selects the primary calculation type (SMA, EMA, SMMA (RMA), WMA, VWMA). Default: EMA. Source: Input data for the MA calculation (e.g., close, open, hl2). Default: close. Length: Lookback period for the primary MA calculation. Default: 9. Color: Sets the color of the primary Fast MA line. Default: Yellow. Line Width: Sets the thickness of the primary Fast MA line. Default: 2. Smoothing Type: Selects secondary smoothing type applied to the primary MA (e.g., None, SMA, EMA) or adds Bollinger Bands (SMA + Bollinger Bands). Default: None. Smoothing Length: Lookback period for the secondary smoothing MA or the basis MA for Bollinger Bands. Relevant only if Smoothing Type is not " None ". Default: 10. BB StdDev: Standard deviation multiplier for Bollinger Bands. Relevant only if Smoothing Type is " SMA + Bollinger Bands ". Default: 2.0. Timeframe: Sets a specific timeframe for the MA calculation. Default: Chart. Wait TF Close: If a timeframe is set, waits for that timeframe's bar to close before plotting, preventing repainting. Default: true. Slow MA: On/Off: Enables/Disables the Slow Moving Average plot and related smoothing/bands. Type: Selects the primary calculation type (SMA, EMA, SMMA (RMA), WMA, VWMA). Default: EMA. Source: Input data for the MA calculation (e.g., close, open, hl2). Default: close. Length: Lookback period for the primary MA calculation. Default: 9. Color: Sets the color of the primary Slow MA line. Default: Yellow. Line Width: Sets the thickness of the primary Slow MA line. Default: 2. Smoothing Type: Selects secondary smoothing type applied to the primary MA (e.g., None, SMA, EMA) or adds Bollinger Bands (SMA + Bollinger Bands). Default: None. Smoothing Length: Lookback period for the secondary smoothing MA or the basis MA for Bollinger Bands. Relevant only if Smoothing Type is not " None ". Default: 10. BB StdDev: Standard deviation multiplier for Bollinger Bands. Relevant only if Smoothing Type is " SMA + Bollinger Bands ". Default: 2.0. Timeframe: Sets a specific timeframe for the MA calculation. Default: Chart. Wait TF Close: If a timeframe is set, waits for that timeframe's bar to close before plotting, preventing repainting. Default: true. MACD: On/Off: Enables/Disables the MACD plots (MACD line, Signal line, Histogram). Fast Length: Lookback period for the fast MA in MACD calculation. Default: 12. Slow Length: Lookback period for the slow MA in MACD calculation. Default: 26. Source: Input data for the MACD MAs. Default: close. Signal Smoothing: Lookback period for the Signal Line MA. Default: 9. Oscillator MA Type: Calculation type for Fast and Slow MAs (SMA, EMA). Default: EMA. Signal Line MA Type: Calculation type for Signal Line MA (SMA, EMA). Default: EMA. MACD Color: Color of the MACD line. Default: #2962FF. MACD Signal Color: Color of the Signal line. Default: #FF6D00. Timeframe: Sets a specific timeframe for the MACD calculation. Default: Chart. Wait TF Close: If a timeframe is set, waits for that timeframe's bar to close. Default: true. On Balance Volume (OBV): On/Off: Enables/Disables the OBV plot and its related MAs/Bands. Type (MA Smoothing): Selects MA type for smoothing OBV (None, SMA, EMA, etc.) or SMA + Bollinger Bands. Default: None. Length (MA Smoothing): Lookback period for the OBV smoothing MA. Default: 14. BB StdDev: Standard deviation multiplier for Bollinger Bands if selected. Default: 2.0. Color: Color of the main OBV line. Default: #2962FF. Timeframe: Sets a specific timeframe for the OBV calculation. Default: Chart. Wait TF Close: If a timeframe is set, waits for that timeframe's bar to close. Default: true. ADX: On/Off: Enables/Disables the ADX plot. ADX Smoothing: Lookback period for the ADX smoothing component. Default: 14. DI Length: Lookback period for the Directional Movement (+DI/-DI) calculation. Default: 14. Color: Color of the ADX line. Default: Red. Timeframe: Sets a specific timeframe for the ADX calculation. Default: Chart. Wait TF Close: If a timeframe is set, waits for that timeframe's bar to close. Default: true. ATR: On/Off: Enables/Disables the ATR plot. Length: Lookback period for the ATR calculation. Default: 14. Smoothing: Selects the calculation type for ATR (SMMA (RMA), SMA, EMA, WMA). Default: SMMA (RMA). Color: Color of the ATR line. Default: #B71C1C. Timeframe: Sets a specific timeframe for the ATR calculation. Default: Chart. Wait TF Close: If a timeframe is set, waits for that timeframe's bar to close. Default: true. Supertrend: On/Off: Enables/Disables the Supertrend plot and background fill. ATR Length: Lookback period for the ATR calculation within Supertrend. Default: 10. Factor: Multiplier for the ATR value used to calculate the Supertrend bands. Default: 3.0. Up Trend Color: Color for the Supertrend line and background during an uptrend. Default: Green. Down Trend Color: Color for the Supertrend line and background during a downtrend. Default: Red. Timeframe: Sets a specific timeframe for the Supertrend calculation. Default: Chart. Wait TF Close: If a timeframe is set, waits for that timeframe's bar to close. Default: true. Choppiness Index: On/Off: Enables/Disables the Choppiness Index plot and bands. Length: Lookback period for the Choppiness Index calculation. Default: 14. Offset: Shifts the plot left or right. Default: 0. Color: Color of the Choppiness Index line. Default: #2962FF. Timeframe: Sets a specific timeframe for the CI calculation. Default: Chart. Wait TF Close: If a timeframe is set, waits for that timeframe's bar to close. Default: true. █ STRATEGY EXAMPLES The following strategy examples are provided for illustrative and educational purposes only to demonstrate how indicators within this bundle could be combined. They do not constitute financial advice or trading recommendations. Always conduct your own thorough research and backtesting before implementing any trading strategy. Here are a few ways the indicators in this bundle can be combined: 1. MA Crossover with Multi-Factor Confirmation Goal: Enter trends early with confirmation from momentum and trend strength, while filtering out choppy conditions. Setup: Enable Fast MA (e.g., 9 EMA), Slow MA (e.g., 50 EMA), MACD, ADX, and Choppiness Index. Entry (Long): - Price > Slow MA (Establishes broader uptrend context). - Fast MA crosses above Slow MA OR Price crosses above Fast MA. - MACD Histogram > 0 (Confirms bullish momentum). - ADX > 20 or 25 (Indicates sufficient trend strength). - Choppiness Index < 61.8 (Filters out excessively choppy markets). Entry (Short): Reverse logic (except for ADX and Choppiness Index). Management: Consider using the Supertrend or an ATR multiple for stop-loss placement. Image showing a chart with 2:1 long and short trades, highlighting a candle disqualified for a long entry due to ADX below 20. 2. Supertrend Breakout Strategy Goal: Use Supertrend for primary signals and stops, confirming with volume and trend strength. Setup: Enable Supertrend, Slow MA, ADX, and OBV. Entry (Long): - Supertrend line turns green and price closes above it. - Price > Slow MA (Optional filter for alignment with larger trend). - ADX is rising or above 20 (Confirms trending conditions). - OBV is generally rising or breaks a recent resistance level (Confirms volume supporting the move). Entry (Short): Reverse logic (except for ADX and OBV). Management: Initial stop-loss placed just below the green Supertrend line (for longs) or above the red line (for shorts). Trail stop as Supertrend moves. Image showing a chart with a 2:1 long trade, one candle disqualified for a short entry, and another disqualified for a long entry. 3. Trend Continuation Pullbacks Goal: Enter established trends during pullbacks to value areas defined by MAs or Supertrend. Setup: Enable Slow MA, Fast MA (or Supertrend), MACD, and ADX. Entry (Long): - Price is consistently above the Slow MA (Strong uptrend established). - ADX > 25 (Confirms strong trend). - Price pulls back towards the Fast MA or the green Supertrend line. - MACD Histogram was decreasing during the pullback but turns positive again OR MACD line crosses above Signal line near the MA/Supertrend level (Indicates momentum resuming). Entry (Short): Reverse logic (except for ADX) during a confirmed downtrend. Management: Stop-loss below the recent swing low or the Slow MA/Supertrend level. Image showing a chart with 2:1 long and short trades, where price pulls back to the fast MA and the MACD histogram changes color, indicating shifts in momentum during the pullbacks. █ CONCLUSION The Trend Following Bundle offers a powerful and flexible solution for traders focused on trend-based strategies. By consolidating essential indicators into one script with deep customization, multi-timeframe analysis, and built-in alerts, it simplifies the analytical workflow and allows for the development of robust, multi-conditional trading systems. Whether used for confirming entries, identifying trend strength, managing risk, or filtering market conditions, this bundle provides a versatile foundation for technical analysis. █ IMPORTANT NOTES ⚠ Parameter Tuning: Indicator settings (lengths, factors, thresholds) are not one-size-fits-all. Adjust them based on the asset being traded, its typical volatility, and the timeframe you are analyzing for optimal performance. Backtesting is crucial . ⚠ Multi-Timeframe Use: Using the Timeframe input allows for powerful analysis but be mindful of potential lag, especially if Wait TF Close is disabled. Signals based on higher timeframes will update only when that higher timeframe bar closes (if Wait TF Close is enabled). ⚠ Confirmation is Key: While the bundle provides many tools, avoid relying on a single indicator's signal. Use combinations to build confluence and increase the probability of successful trades. ⚠ Chart Clarity: With many indicators available, only enable those relevant to your current strategy to avoid overwhelming your chart. Use the On/Off toggles frequently. ⚠ Confirmed Bars Only: Like most TradingView indicators, signals and plots are finalized on the close of the bar. Be cautious acting on intra-bar signals which may change before the bar closes. █ RISK DISCLAIMER Trading involves substantial risk of loss and is not suitable for every investor. The Trend Following Bundle indicator provides technical analysis tools for educational and informational purposes only; it does not constitute financial advice or a recommendation to buy or sell any asset. Indicator signals identify potential patterns based on historical data but do not guarantee future price movements or profitability. Always conduct your own thorough analysis, use multiple sources of information, and implement robust risk management practices before making any trading decisions. Past performance is not indicative of future results. 📊 Happy trading! 🚀
Penunjuk Pine Script®
oleh ActiveQuants