Daily Delta TrendDaily Delta Trend is a useful exponential moving average of the 50 day and 200 day simple moving average. In the first Daily Delta Trend I realized that the simple moving averages were pretty choppy as they were buy then sell over short period of times. So I thought taking an average of another average would smooth my results and give it buy and sell signals more clearly. In chart 1, you can see that it is choppy, and in chart 2 is much smoother.
The way I've been interpreting the chart is to trade it only when the 50-day average (GREEN) Trades with 200-day average (RED). For example, when red and green are both >0 = Buy and both <0 = Sell.
Just from a little of pretesting, I was able to find solid trades from multiple pairs.
DISCLAIMER, I have not actually traded this indicator as I just wrote it for the past few hours, But I thought it was interesting and maybe I might trade it. Feel free to play with it and comment back :P
Cari dalam skrip untuk "情绪指数板块+约200只股票+选股规则"
My5min1. Follow the instructions for entry and exit exactly as above. Don’t second guess, or assume/presume anything.
2. Avoid entering the trade when the price is temporarily above /below 10 day MA, but the price candle hasn’t fully formed yet. Enter the trade only after the price candle closes above/below the 10 day MA.
3. Exit the trade immediately when the price candle closes above/below 10 day MA in the direction opposite to the trade. Don’t remain in the trade wishing it to turn in your favor.
4. Never ever trade in the opposite direction of the market. i.e. don’t buy when the price is below 200 day MA and sell when the price is above 200 day MA.
5. Take profits when limit is reached. Don’t be greedy and keep on increasing the target. Remember- A bird in hand is worth two in the bush.
Strategy CCTBBO v2 | FadiorSecond version of the CCTBBO strategy. CCTBBO is a price oscillator that fluctuate between -200 and 200 according to price volatility. Value 0 represent mean price - 2 * StdDev and value 100 represent mean price + 2 * StdDev.
Signal is generated when oscillator cross over / under it's EMA. Position is closed with trailing stop. Source of the indicator is the highs of the last n bars.
Tips if you want to trade with it :
- use small EMA period to increase number of signals and fasten detection of price reversal.
- If there is too much signals you can try increase EMA or filter noise by playing with the margin. The margin is the minimum value between the oscillator and it's moving average to consider a signal valid.
- define your trailing stop by percentage of the price or by ticks. Default value 0.013 equal 1.3% of the Bitcoin price which is approximatly $5.
- make sure you correctly set the number of digits of your current security
Single Timeframe Moving AverageProvides Moving average of 200 and 50 at the specific timeframe regardless of what interval you're looking at.
Saving the need to change it manually each time you switch the interval.
In this chart, I am looking at 4H interval with EMA of 50/200 of daily timeframe.
Matrix SeriesFor those who are using charts with white backround they should change from the indicator options->style the black color to white.
OB/OS zones are at 200 and -200 and marked with aqua color above below the candles.
www.wisestocktrader.com
and the repost here www.wisestocktrader.com
CM_Enhanced CCI V2Added 0 Line, + - 200 lines
Added a line that hi-lights the outside of the CCI
Updated 8/12/2014 by request for christian.david.75457
Added Ability To Plot 2nd CCI - !!!
Added ability to turn On/Off the +-200 lines.
Added Ability to Turn On/Off Show Area of CCI
Added Ability To Turn On/Off Show The Outer CCI Line
VXN Money Flow IndexThis indicator is based on other open source scripts. It's designed for trading Nasdaq futures (NQ and MNQ). It generates trading signals using the Money Flow Index (MFI), which measures buying and selling pressure based on price and volume. The VXN index (CBOE Nasdaq Volatility Index) filters signals to align with market sentiment.
- MFI Signals: Bullish signals occur when MFI crosses above the 20 level (oversold) and the VXN background is green (bullish sentiment). Bearish signals occur when MFI crosses below the 80 level (overbought) and the VXN background is red (bearish sentiment).
- VXN Filter: The background is green when the VXN 1-period EMA is below the 200-period SMA (bullish), and red when the EMA is above the SMA (bearish).
Usage: Apply this indicator to a Nasdaq futures chart in TradingView. Take long trades on MFI crossovers above 20 when the background is green, and short trades on MFI crossunders below 80 when the background is red. Signals are plotted as triangles on the price chart.
VXN VWAP & TWAPThis indicator is based on other open source scripts. It's designed for trading Nasdaq futures (NQ and MNQ). It provides directional guidance by combining the VXN index (CBOE Nasdaq Volatility Index) with VWAP and TWAP.
- VXN: Helps assess market volatility and sentiment for Nasdaq futures. A 1-period EMA and 200-period SMA of VXN are used to determine bullish (EMA < SMA) or bearish (EMA > SMA) conditions, visualized via background color.
- VWAP: Calculates the volume-weighted average price, serving as a dynamic support/resistance level. Its direction (rising or falling) indicates bullish or bearish momentum.
- TWAP: Calculates the time-weighted average price over a user-defined anchor period, useful for identifying average price trends over time.
Usage: Traders should align their trades with the direction of VWAP and TWAP (green for bullish, red for bearish) and use the VXN EMA vs. SMA crossover to confirm market sentiment (green background for bullish, red for bearish).
Price vs SMAThis indicator displays the current price in percentage terms, indicating whether it is above or below a selected simple moving average (SMA). It’s designed to be clean and minimal, with the option to display a brief sentence on the chart for added clarity.
The script calculates the distance between the current price and a chosen simple moving average (SMA) and expresses that distance as a percentage. By default, it uses the 200-period SMA, but you can adjust the length to any value, such as 50 or 100, depending on your trading style. A positive percentage means price is trading above the SMA, while a negative percentage means it is below.
The percentage difference is rounded to whole numbers and can be displayed directly in the chart legend if the “Indicator values” box is checked in the TradingView settings. This keeps the chart clean while still providing at-a-glance information about the price relative to your selected moving average.
For extra clarity, the script also includes an option to display a short sentence on the chart itself. This sentence will read “Price is x% above SMA” in green when price is above the SMA, or “Price is x% below SMA” in red when price is below. This visual cue makes it easy to interpret the relationship between price and the moving average without adding clutter.
MACD + RSI/MA Signals with 200 EMA (Overlay)How It’s Built
MACD Line = EMA(12) – EMA(26)
→ Short-term vs. medium-term momentum.
Signal Line = EMA(9) of MACD Line
→ Smooths things out.
Histogram = MACD Line – Signal Line
→ Visual "energy gauge" showing momentum strength.
What It Actually Tells You
Crossover Signals
MACD Line crosses above Signal Line → Bullish shift (momentum turning up).
MACD Line crosses below Signal Line → Bearish shift (momentum turning down).
⚠️ But: crossovers lag price. On their own, they’re late.
Zero Line Relevance
Above Zero → Trend bias is bullish (short-term EMA > long-term EMA).
Below Zero → Trend bias is bearish.
Crosses through zero often align with bigger trend changes.
Histogram Use
Expanding histogram = momentum strengthening.
Shrinking histogram = momentum weakening (trend may be stalling).
Flips from positive to negative (or vice versa) often precede crossovers.
Divergences
Price makes a new high, but MACD doesn’t → momentum is fading → possible reversal.
Same idea for lows.
Where Traders Go Wrong
Using it alone. It’s a confirmation tool, not an entry machine.
Misreading every crossover as a trade. Many are just noise, especially on low timeframes.
Forgetting market context — MACD works best in trending markets, not chop.
Best Way to Use It
With trend structure + support/resistance:
→ E.g., you’re eyeing a BTC bounce long. If MACD histogram turns from negative to positive while price defends support, that’s confirmation, not a blind buy.
For momentum timing:
→ Ride trends longer if histogram stays strong. Scale out when it weakens.
Divergence spotting:
→ Early heads-up that a reversal is brewing.
Untouched ExtremesWhat it is
Untouched Extremes plots horizontal levels at green-candle highs and red-candle lows. Each level is considered “untouched” (clean liquidity) until price revisits it; on the first valid touch the line auto-deletes, keeping only live targets on your chart.
How it works (logic)
Bar close event
If close > open, the script draws a line at that bar’s high and extends it to the right.
If close < open, it draws a line at that bar’s low and extends it to the right.
(Optional) Perfect/almost-dojis can be classified as green or red via settings.
Touch & removal
A green-high line is removed when any later bar’s high ≥ level (optionally within a tick tolerance).
A red-low line is removed when any later bar’s low ≤ level (optionally within a tick tolerance).
You can delay deletion by N bars to make the touch visible before the line disappears.
Housekeeping
Maximum active lines per side and line styling are user-configurable.
Why it’s useful
Untouched highs/lows often coincide with resting liquidity and incomplete price probes. Tracking them helps:
Define targets and magnets price may seek.
Frame mean-reversion rotations after a failed push.
Keep the chart clean: only levels that have not been traded are displayed.
How to use it (trading idea)
Confirmation rule: Treat the line as a level/zone. Price can pierce it; wait for a clear reversal candle pattern (e.g., pin bar, engulfing, strong momentum shift) at or immediately after the touch.
Directional play:
If a bullish reversal pattern forms at/around a red-low line, the working assumption is that price will move toward the first untouched upper line (nearest green-high line above). Many traders use that as the primary target.
Conversely, if a bearish reversal pattern forms at/around a green-high line, expect rotation toward the first untouched lower line.
Risk management: Stops typically go just beyond the level or beyond the pattern’s wick. Consider a fixed R:R (e.g., 1:2) and partials at intermediate levels.
Settings
Doji handling: Choose how to classify close ≈ open bars (Green / Red / Ignore). A small equality margin (ticks) helps with rounding on some symbols.
Touch tolerance (ticks): Counts near-misses as touches if desired.
Deletion delay (bars): Wait N bars after creation before a line becomes eligible for deletion.
Max lines per side / width / colors: Keep the view readable.
Tips
Works on any symbol/timeframe; lower TFs produce more levels—adjust Max lines accordingly.
Combining with a trend filter (e.g., EMA-200), ATR distance, or volume clues can improve selectivity.
If spreads or wicks are noisy, increase tolerance slightly and/or use deletion delay to visualize touches.
Note: This tool provides structure and potential targets, not signals by itself. Always require your reversal pattern as confirmation and manage risk appropriately.
FijuThis indicator is designed to identify buy opportunities and then assist in trade management.
It relies on several technical filters:
Long-term trend: price above the 200-period moving average.
Momentum: bullish MACD (MACD line > signal line) and optionally positive.
Relative strength: RSI above 30, with detection of overbought conditions and weakness through the RSI moving average.
Timing: additional validation using candle color and proximity of the price to the SMA200 (limited deviation).
The indicator highlights different states using background colors and a label on the last candle:
🟢 Buy: potential buy signal.
🔵 Hold: keep the position.
🟠 Warning: caution, RSI is overbought or losing strength.
🔴 Sell: conditions invalidated, exit recommended.
👉 This is not an automated system but a decision-support tool. It only works for long entries and must be combined with a proper trade management methodology (money management, stop-loss, take-profit, trend following, etc.).
S&R ZonesThis indicator automatically detects swing highs and swing lows on the chart using a 3-bar swing structure. Once a swing point is confirmed, it evaluates the price movement and body size of subsequent candles. If the movement meets a volume-based range condition (2.5× the average body size of the last 5 candles), the indicator creates a zone around that swing.
Swing High Zones: Drawn from the highest price of the swing cluster down to its midpoint.
Swing Low Zones: Drawn from the lowest price of the swing cluster up to its midpoint.
These zones act as dynamic support and resistance levels and remain on the chart until they are either:
Broken (price closes beyond the zone), or
Expired (more than 200 bars old).
Zones are color-coded for clarity:
🔴 Red shaded areas = Swing High resistance zones.
🟢 Green shaded areas = Swing Low support zones.
This makes the indicator useful for identifying high-probability reversal areas, liquidity zones, and supply/demand imbalances that persist until invalidated.
Moving Average Adaptive RSI [BackQuant]Moving Average Adaptive RSI
What this is
A momentum oscillator that reshapes classic RSI into a zero-centered column plot and makes it adaptive. It builds RSI from two parts:
• A sensitivity window that scans several recent bars to capture the strongest up and down impulses.
• A selectable moving average that smooths those impulses before computing RSI.
The output ranges roughly from −100 to +100 with 0 as the midline, with optional extra smoothing and built-in divergence detection.
How it works
Impulse extraction
• For each bar the script inspects the last rsi_sen bars and collects upward and downward price changes versus the current price.
• It keeps the maximum upward change and maximum downward change from that window, emphasizing true bursts over single-bar noise.
MA-based averaging
• The up and down impulse series are averaged with your chosen MA over rsi_len bars.
• Supported MA types: SMA, EMA, DEMA, WMA, HMA, SMMA (RMA), TEMA.
Zero-centered RSI transform
• RS = UpMA ÷ DownMA, then mapped to a symmetric scale: 100 − 200 ÷ (1 + RS) .
• Above 0 implies positive momentum bias. Below 0 implies negative momentum bias.
Optional extra smoothing
• A second smoothing pass can be applied to the final oscillator using smoothing_len and smooth_type . Toggle with “Use Extra Smoothing”.
Visual encoding
• The oscillator is drawn as columns around the zero line with a gradient that intensifies toward extremes.
• Static bands mark 80 to 100 and −80 to −100 for extreme conditions.
Key inputs and what they change
• Price Source : input series for momentum.
• Calculation Period (rsi_len) : primary averaging window on up and down components. Higher = smoother, slower.
• Sensitivity (rsi_sen) : how many recent bars are scanned to find max impulses. Higher = more responsive to bursts.
• Calculation Type (ma_type) : MA family that shapes the core behavior. HMA or DEMA is faster, SMA or SMMA is slower.
• Smoothing Type and Length : optional second pass to calm noise on the final output.
• UI toggles : show or hide the oscillator, candle painting, and extreme bands.
Reading the oscillator
• Midline cross up (0) : momentum bias turning positive.
• Midline cross down (0) : momentum bias turning negative.
• Positive territory :
– 0 to 40: constructive but not stretched.
– 40 to 80: strong momentum, continuation more likely.
– Above 80: extreme risk of mean reversion grows.
• Negative territory : mirror the same levels for the downside.
Divergence detection
The script plots four divergence types using pivot highs and lows on both price and the oscillator. Lookbacks are set by lbL and lbR .
• Regular bullish : price lower low, oscillator higher low. Possible downside exhaustion.
• Hidden bullish : price higher low, oscillator lower low. Bias to trend continuation up.
• Regular bearish : price higher high, oscillator lower high. Possible upside exhaustion.
• Hidden bearish : price lower high, oscillator higher high. Bias to trend continuation down.
Labels: ℝ for regular, ℍ for hidden. Green for bullish, red for bearish.
Candle coloring
• Optional bar painting: green when the oscillator is above 0, red when below 0. This is for visual scanning only.
Strengths
• Adaptive sensitivity via a rolling impulse window that responds to genuine bursts.
• Configurable MA core so you can match responsiveness to the instrument.
• Zero-centered scale for simple regime reads with 0 as a clear bias line.
• Built-in regular and hidden divergence mapping.
• Flexible across symbols and timeframes once tuned.
Limitations and cautions
• Trends can remain extended. Treat extremes as context rather than automatic reversal signals.
• Divergence quality depends on pivot lookbacks. Short lookbacks give more signals with more noise. Long lookbacks reduce noise but add lag.
• Double smoothing can delay zero-line transitions. Balance smoothness and timeliness.
Practical usage ideas
• Regime filter : only take long setups from your separate method when the oscillator is above 0, shorts when below 0.
• Pullback confirmation : in uptrends, look for dips that hold above 0 or turn up from 0 to 40. Reverse for downtrends.
• Divergence as a heads-up : wait for a zero-line cross or a price trigger before acting on divergence.
• Sensitivity tuning : start with rsi_sen 2 to 5 on faster timeframes, increase slightly on slower charts.
Alerts
• MA-A RSI Long : oscillator crosses above 0.
• MA-A RSI Short : oscillator crosses below 0.
Use these as bias or timing aids, not standalone trade commands.
Settings quick reference
• Calculation : Price Source, Calculation Type, Calculation Period, Sensitivity.
• Smoothing : Smoothing Type, Smoothing Length, Use Extra Smoothing.
• UI : Show Oscillator, Paint Candles, Show Static High and Low Levels.
• Divergences : Pivot Lookback Left and Right, Div Signal Length, Show Detected Divergences.
Final thoughts
This tool reframes RSI by extracting strong short-term impulses and averaging them with a moving-average model of your choice, then presenting a zero-centered output for clear regime reads. Pair it with your structure, risk and execution process, and tune sensitivity and smoothing to the market you trade.
