ICT Setup 04 [TradingFinder] SFP Sweep Liquidity Fake CHoCH/BOS🔵 Introduction
In smart money and ICT based trading, liquidity is never random. Some of the most meaningful market moves begin with a liquidity sweep where price intentionally hunts a previous swing high or swing low to trigger stop loss orders and absorb volume.
This manipulation is often followed by a sharp reversal from a reaction zone, creating ideal conditions for a high probability entry. This indicator is built to detect exactly that. It identifies a valid swing point and defines a reaction zone where price is likely to react.
For short setups, the zone lies between the swing high and the maximum of the candle’s open or close. For long setups, it’s drawn from the swing low to the minimum of the open or close.
When price returns to this zone and forms a qualified confirmation candle typically a doji or a small bodied candle that closes inside the zone while sweeping the liquidity this is a potential sign of reversal.
The candle must show both the sweep and the inability to hold above or below the key level, signaling a fake breakout or failed move. By combining elements of liquidity hunt, reaction zone rejection, and candle based entry confirmation, this tool highlights sniper entry points used by smart money to trap retail traders and reverse the trend. It helps filter out noise and enhances timing, making it ideal for trading in alignment with institutional order flow.
Long Position :
Short Position :
🔵 How to Use
This indicator is designed to highlight precise moments where price sweeps liquidity and reacts within a high probability reversal zone. By identifying clean swing highs and lows and defining a smart reaction zone around them, it filters out weak fakeouts and focuses only on setups with strong institutional footprints.
The tool works best when combined with market structure analysis and is suitable for both scalping and intraday trading. Below is a breakdown of how to interpret the signals for long and short positions based on the visual setups provided.
🟣 Long Setup
In a long setup, the indicator first detects a valid swing low where liquidity has likely accumulated below. A reaction zone is then drawn between the swing low and the minimum of the open or close of the swing candle.
When price returns to this zone, it must sweep the previous low and form a precise confirmation candle, such as a doji or a small bodied candle, that closes inside the zone. This candle must also reject the lower level, showing failure to continue downward.
As shown in the chart, once the liquidity grab is complete and the confirmation candle forms, a clean long signal is issued, indicating a potential bullish reversal backed by smart money behavior.
🟣 Short Setup
In a short setup, the indicator identifies a swing high where buy-side liquidity is resting. It then constructs a reaction zone between the high and the maximum of the open or close of the swing candle. Price must return to this zone, sweep the swing high, and form a bearish confirmation candle inside the zone.
A classic example is a doji or rejection candle that traps breakout buyers and fails to hold above the previous high. In the provided chart, the price aggressively hunts the liquidity above the swing high, but the close within the reaction zone signals exhaustion, prompting a short signal with high reversal probability.
These setups represent moments where price action, liquidity behavior, and candle structure align to offer strong entries. By focusing on clean sweeps and reactive confirmations, the indicator helps traders stay on the side of smart money and avoid common breakout traps.
🔵 Settings
🟣 Logical settings
Swing period : You can set the swing detection period.
Max Swing Back Method : It is in two modes "All" and "Custom". If it is in "All" mode, it will check all swings, and if it is in "Custom" mode, it will check the swings to the extent you determine.
Max Swing Back : You can set the number of swings that will go back for checking.
Maximum Distance Between Swing and Signal :The maximum number of candles allowed between the swing point and the potential signal. The default value is 50, ensuring that only recent and relevant price reactions are considered valid.
🟣 Display settings
Displaying or not displaying swings and setting the color of labels and lines.
🟣 Alert Settings
Alert SFP : Enables alerts for Swing Failure Pattern.
Message Frequency : Determines the frequency of alerts. Options include 'All' (every function call), 'Once Per Bar' (first call within the bar), and 'Once Per Bar Close' (final script execution of the real-time bar). Default is 'Once per Bar'.
Show Alert Time by Time Zone : Configures the time zone for alert messages. Default is 'UTC'.
🔵 Conclusion
This indicator is built for traders who rely on liquidity driven setups and smart money principles. By combining swing structure analysis with precision reaction zones and strict entry confirmation, it isolates the exact moments where price sweeps liquidity and fails to continue. These are high value points where institutional activity often reveals itself, and retail traps unfold.
Unlike generic breakout tools, this script focuses on quality over quantity by requiring both a sweep of a swing high or low and a confirmed rejection candle that closes inside a predefined zone. With customizable swing depth, proximity filters, visual highlights, and alert functions, it offers a complete framework for identifying and acting on fake breakouts with confidence. Whether you trade forex, crypto, or indices, this tool enhances your ability to align with true order flow and take entries where liquidity is most likely to shift.
Analisis Trend
NASDAQ Reaper📈 NASDAQ Reaper – The Ultimate Wall Street Killer
The NASDAQ Reaper is a highly advanced Smart Money Concepts (SMC) + Price Action based indicator, engineered for traders who demand accuracy, precision, and real-time edge in the NASDAQ (NQ) market.
This tool was crafted for serious traders looking to dominate the charts with institutional-grade logic, featuring:
✅ Smart Buy/Sell Zones
✅ Opening Range Breakout (ORB) Detection
✅ Volume Confirmation for Strong Entries
✅ Real-Time Entry & Exit Signals
✅ Trend & Momentum Alignment (Multi-Timeframe Logic)
✅ Trailing TP & SL with Visual Feedback
✅ Backtest Module for Strategy Validation
💡 Designed to filter noise and highlight only high-probability setups, NASDAQ Reaper helps you stay one step ahead of retail traders and ride the moves the smart money makes.
🔔 Works best on:
• 5M, 15M, and 30M charts
• London and New York sessions
• Scalping or intraday swing strategy
Whether you're aiming for 50+ tick scalps or sniper entries aligned with trend reversals, this is your secret weapon to level up your trading game.
Ergin Swing V2"Wealth doesn’t come in a hurry. Be patient with yellow, take a break with purple."
Ergin Swing V2 is a minimalistic yet highly effective visual strategy built on a single indicator: EMA14.
✅ Yellow candle → First close above EMA14 = Buy signal
🟣 Purple candle → First close below EMA14 = Sell signal
🔇 No noisy signals in between. Only the first cross is marked.
Ideal for:
Swing traders who prefer clean charts
Trend-followers who avoid indicator overload
Anyone who wants to "see the signal" clearly without alerts popping every bar
➕ Can be extended with RSI, TP/SL logic, or trend filters
Created by Ergin • Powered by Patience • Verified by Candles
CM Volume Projection Indicator with ATRCM Volume Projection Indicator
Description:
Elevate your trading analysis with the CM Volume Projection Indicator, a pioneering tool crafted for Trading View charts. This closed-source indicator redefines volume analysis by delivering dynamic, real-time volume forecasts, offering traders a nuanced understanding of market momentum across diverse timeframes and assets.
Key Features:
Dynamic Volume Projection: Utilizes a proprietary algorithm to generate both original and adjusted volume projections, blending current bar elapsed time with historical averages. This creates a tailored forecast that adapts to market conditions, surpassing the limitations of static volume bars.
Percentage-Based Time Adjustment: Incorporates a customizable time factor based on the percentage of remaining candle duration (default 16.67%), enabling precise scaling across timeframes. This innovative approach minimizes overestimation by adjusting projections dynamically as the candle nears completion.
Volume Change Percentage: Introduces a unique metric by comparing current volume to the proportional volume at the same elapsed time in the previous candle, capturing intrabar momentum shifts that traditional indicators, reliant on full candle data, overlook.
Adaptive Spike Factor: Enhances responsiveness by adjusting projections based on volume spikes relative to a moving average, while stabilizing low-volume periods, ensuring reliability in volatile markets.
Fully Customizable Settings: Offers user-controlled adjustments via the strategy bar—including historical averaging period, minimum adjustment factor, spike threshold, moving average type (SMA or EMA), cap threshold percentage, and scaling factor—allowing tailored application without script access.
Visual Customization: Provides color-coded bars and labels for clear interpretation, with optional debug and elapsed time displays for advanced analysis.
How It Works and Adds Value:
The CM Volume Projection Indicator combines a linear scaling of previous candle volume (proportional to elapsed time) with a dynamic cap based on the remaining time percentage, refined by a squared time factor and volatility adjustments. This synergy creates an original intrabar forecasting model that:
Forecasts in Real-Time: Provides forward-looking projections, aiding anticipation of volume trends within the current candle, adaptable to any timeframe.
Delivers Intrabar Precision: Tracks momentum shifts by comparing elapsed-time volumes, offering a granularity static indicators like OBV or volume bars cannot match.
Adapts Across Timeframes: Uses percentage-based caps to ensure consistency, reducing misleading spikes during volatile periods, a step beyond traditional moving average-based tools.
Empowers Strategy: Integrates current volume, moving averages, and adaptive adjustments into a versatile metric, giving traders a strategic edge in diverse market conditions.
Ideal For:
Day traders and scalpers seeking real-time volume insights across short timeframes.
Swing traders analyzing momentum shifts within candles on various durations.
Technical analysts customizing indicators for diverse assets and market environments.
This indicator enhances market analysis as a valuable additional tool, success depends on your strategy and risk management. Explore its potential by adjusting settings via the strategy bar to suit your trading style and leverage its innovative projections in today’s dynamic markets.
MC TQQQ Alpha v1Plots the difference between the stock 1 / 3 month performance and the NASDAQ:TQQQ 1 / 3 month performance (pre-enabled is the 1 month performance, but you can also enable the 3 month performance).
Hodie Smart Inside BarThe Hodie Smart Inside Bar indicator automatically detects and visually highlights inside bars — candles fully contained within the range of the previous (parent) candle.
How the indicator works:
Inside Bar Identification:
The indicator analyzes each candle and checks if its high is lower than the previous candle’s high, and its low is higher than the previous candle’s low. If this condition is met, the candle is considered an inside bar.
Size Filtering:
To filter out small and insignificant consolidations, the indicator compares the size of the parent candle’s range to the inside bar’s range. Only if the parent candle is significantly larger (2 times or more — adjustable parameter), the inside bar is considered significant.
Zone Drawing:
For each detected inside bar, the indicator draws a rectangular zone bounded by the parent candle’s high and low. This zone automatically extends to the right as new bars appear until the price moves outside the parent candle’s range.
Zone Completion:
Once the price closes above the parent candle’s high or below its low, the zone is considered complete and stops extending.
Visual Aids:
If enabled, the indicator can shade the background of the current inside bar for additional visual emphasis.
A label with the text "IB" appears above the inside bar candle on the chart for easier identification.
Alerts:
Supports alerts when a new inside bar forms.
Alerts help traders notice important signals promptly.
To activate, create an alert on the indicator with the condition “New Inside Bar”.
Benefits of the Indicator:
Inside bars often signal consolidation and potential liquidity accumulation, which may be followed by a strong impulsive breakout. This indicator helps traders quickly identify consolidation zones and prepare for possible price moves.
Hodie Smart Inside BarThe Hodie Smart Inside Bar indicator automatically detects and visually highlights inside bars — candles fully contained within the range of the previous (parent) candle.
How the indicator works:
Inside Bar Identification:
The indicator analyzes each candle and checks if its high is lower than the previous candle’s high, and its low is higher than the previous candle’s low. If this condition is met, the candle is considered an inside bar.
Size Filtering:
To filter out small and insignificant consolidations, the indicator compares the size of the parent candle’s range to the inside bar’s range. Only if the parent candle is significantly larger (2 times or more — adjustable parameter), the inside bar is considered significant.
Zone Drawing:
For each detected inside bar, the indicator draws a rectangular zone bounded by the parent candle’s high and low. This zone automatically extends to the right as new bars appear until the price moves outside the parent candle’s range.
Zone Completion:
Once the price closes above the parent candle’s high or below its low, the zone is considered complete and stops extending.
Visual Aids:
If enabled, the indicator can shade the background of the current inside bar for additional visual emphasis.
A label with the text "IB" appears above the inside bar candle on the chart for easier identification.
Alerts:
Supports alerts when a new inside bar forms.
Alerts help traders notice important signals promptly.
To activate, create an alert on the indicator with the condition “New Inside Bar”.
Benefits of the Indicator:
Inside bars often signal consolidation and potential liquidity accumulation, which may be followed by a strong impulsive breakout. This indicator helps traders quickly identify consolidation zones and prepare for possible price moves.
Confirmed Candlestick Pattern DetectorConfirmed Candlestick Pattern Detector, such as Evening Star, Morning Star etc.
Supply & Demand (OTC)Supply & Demand - Advanced Zone Detection
Overview
This indicator is a sophisticated tool designed to automatically identify and draw high-probability supply and demand zones on your chart. It analyzes pure price action to find key areas where institutional buying and selling pressure has previously occurred, providing you with a clear map of potential market turning points.
Unlike basic supply and demand indicators, this script is built with a proprietary engine that intelligently defines zone boundaries and filters for the most relevant price action patterns. It's designed to be a clean, professional, and highly customizable tool for traders who use supply and demand as a core part of their strategy.
Features
Advanced Zone Detection: Automatically finds and draws supply and demand zones based on significant price imbalances.
Reversal & Continuation Patterns: Identifies all four major price action patterns: Rally-Base-Drop (RBD), Drop-Base-Rally (DBR), Rally-Base-Rally (RBR), and Drop-Base-Drop (DBD).
"Level on Level" (LoL) Analysis: Automatically detects and labels zones that are stacked closely together, highlighting areas of potentially high liquidity and significance.
Wider vs. Preferred Zones: Choose between two zone definition modes. "Wider" mode draws the zone based on the full range of the consolidation, while "Preferred" mode refines the entry line based on key price action within the base, offering more precision.
Smart Zone Display: Intelligently displays only the most relevant zones closest to the current price, keeping your chart clean and focused. Supply zones above the current price and demand zones below are automatically prioritized and displayed based on your settings.
Customizable Zone Interaction: Control how zones react after being tested. Zones can change color on a first touch and be automatically deleted after a significant violation, which you can define by a percentage.
Customizable Visuals & Alerts: Fully customize the colors of all zones and candles. Enable or disable alerts for new zone creation and zone touches to stay on top of market movements.
How to Use
Identify Zones: The indicator will automatically plot supply zones (red) above the price and demand zones (green) below the price. These are potential areas to look for trade entries.
Assess Zone Strength: The strongest zones are typically "fresh" (untouched) and are formed by a strong, explosive move away from a tight consolidation (a small number of base candles).
Use Labels for Context: The floating labels (RBD, DBR, RBR (LoL), etc.) provide immediate context about the price action structure that formed each zone. "LoL" indicates a "Level on Level" zone, which may be of higher importance.
Wait for Confirmation: For the highest probability setups, wait for the price to return to a zone and show signs of rejection (e.g., reversal candlestick patterns) before considering an entry.
Settings Overview
Zone Definition: Control the core logic, such as including continuation patterns, setting the max number of base candles, and choosing between Wider and Preferred zone types.
Zone Display & Limits: Toggle limits on or off, and specify the maximum number of supply and demand zones to show on the chart.
Zone Interaction: Define how zones react to being tested, including the percentage required to delete a zone.
Colors & Style: Fully customize the appearance of zones, labels, and price candles.
Alerts: Enable or disable alerts for key events.
Disclaimer
This indicator is a tool for market analysis and should not be considered financial advice or a signal provider. Always use proper risk management and conduct your own analysis before making any trading decisions. Past performance is not indicative of future results.
PINO EMA Rhythm Pack📌 PINO EMA Rhythm Pack
This indicator provides a multi-layered visual framework for analyzing the **rhythm and structure** of price movements using a customizable combination of EMAs and SMA. It is designed to simplify the interpretation of momentum shifts, pullbacks, and structural alignment across different time frames.
---
🔹 **Purpose & Use**
Use this tool to interpret short-term market rhythm (EMA 10/20/50), detect transitions through mid-term anchors (EMA 21), and align with long-term directional flow (EMA 200, SMA 200), all within one clean overlay.
---
🔹 **Key Features**
- Default view focuses on short-term rhythm:
• EMA 10 / EMA 20 / EMA 50
- Optional anchors and long-term guides:
• EMA 21 / EMA 200 / SMA 200
- Clean line colors and varied thickness for quick visual parsing
- Fully toggleable components to suit your trading framework
- No alerts, no signals — just visual context
---
🔹 **Note**
This open-source script was built for educational purposes and practical chart use. It brings together widely-used moving average concepts into one flexible overlay, aiming to support **structured discretionary analysis** and improve visual clarity.
This open-source script was built for educational purposes and practical chart use.
Asymmetric Fractal (Safe Version) Asymmetric Fractal .
The number of past and future bottles can be set separately. Easy to use for determining trends.
Golden Pocket Syndicate [GPS]🔍 Golden Pocket Syndicate
The Golden Pocket Syndicate is a precision tool built for identifying high-probability reaction zones around dynamic golden pocket levels. Unlike generic fib overlays or EMA mashups, GPS uses a multi-timeframe approach to highlight key inflection zones based on institutional price behavior.
🧠 Core Logic:
• Golden Pocket Zones for Daily, Weekly, Monthly, Previous Periods & Yearly levels
• Volume-aware trend confirmation using WaveTrend + EMA alignment
• Clean Reversal Diamonds mark strong pivots with volume confluence
• Trend Strength Bubbles (white for bullish, purple for bearish) show when trend + momentum + volume align
• Visuals scale by proximity to price, minimizing noise and maximizing clarity
⚙️ How to Use:
• Use Golden Pocket zones to anticipate pullbacks, reversals, or continuation setups
• Look for Diamond signals near GP levels as potential pivot triggers
• Confirm with volume and EMA/WaveTrend alignment
• Use bubbles as secondary confirmation—not every bubble is a trade, but every major move confirms via bubble first
🆕 What Makes It Unique:
GPS isn’t a mashup of standard scripts—it filters only the most relevant price zones and prints actionable signals sparingly. It avoids overfitting by weighting volume trends and clean trend structure, giving it utility in scalping, swing, and intraday positioning.
🚫 Not Included:
• No repainting
• No built-in TradingView signals
• No automated alerts for every crossover—GPS only highlights high-probability moves.
Fractal Adaptive Moving Average (FRAMA)Core Concept
Unlike traditional moving averages that use fixed smoothing factors, FRAMA adapts its responsiveness based on how "fractal" or chaotic the price movement is:
In trending markets (low fractal dimension), it becomes more responsive
In choppy/sideways markets (high fractal dimension), it becomes smoother
How It Works
1. Fractal Dimension Calculation:
Splits the lookback period into two halves
Calculates price ranges for each half and the total period
Uses logarithmic ratios to determine the fractal dimension (bounded between 1.0 and 2.0)
2. Dynamic Alpha Calculation:
Converts fractal dimension to a smoothing factor (alpha)
Higher fractal dimension = lower alpha = smoother average
Lower fractal dimension = higher alpha = more responsive average
3. Adaptive Smoothing:
Applies the calculated alpha to create the moving average
FRAMA = alpha × current_price + (1 - alpha) × previous_FRAMA
Key Parameters
Length (16): Lookback period for calculations
Fast Constant (4.0): Maximum responsiveness limit
Slow Constant (300.0): Minimum responsiveness limit
Visual Features
Line Color: Green when rising, red when falling
Background: Light green above FRAMA (bullish), light red below (bearish)
Information Table: Shows current FRAMA value, price, trend direction, and efficiency ratio
Close Price: Plotted as a semi-transparent white line for comparison
Trading Applications
FRAMA is particularly useful for:
Trend Following: More responsive in strong trends, less noisy in consolidations
Support/Resistance: Acts as dynamic support in uptrends, resistance in downtrends
Market Regime Detection: The efficiency ratio helps identify trending vs. ranging markets
Entry/Exit Signals: Crossovers and price position relative to FRAMA
The indicator automatically balances between being fast enough to catch trends early while being smooth enough to avoid false signals in choppy markets.
In this FRAMA script, fractal refers to measuring the complexity or "roughness" of price movements over time, not the self-similar geometric patterns we typically think of.
What the Script Measures
The script calculates a fractal dimension that quantifies how chaotic or smooth the price action is:
Low fractal dimension (closer to 1.0): Price moves in a relatively straight, trending manner
High fractal dimension (closer to 2.0): Price moves in a jagged, choppy, sideways manner.
The Logic
If the market is trending smoothly:
The sum of the two half-period ranges will be close to the total range
This gives a fractal dimension closer to 1.0
The indicator becomes more responsive (faster)
If the market is choppy/sideways:
The sum of the two half-period ranges will be much larger than the total range
This gives a fractal dimension closer to 2.0
The indicator becomes less responsive (smoother)
Practical Example
Imagine a 16-period lookback:
Trending market: Price goes from 100 → 116 steadily
Choppy market: Price bounces 100→108→102→114→106→116
The choppy market has a higher fractal dimension because there's more "path length" relative to the actual distance traveled.
Why This Matters
The fractal dimension becomes the adaptive mechanism that automatically adjusts the moving average's sensitivity based on current market conditions - making it faster in trends and smoother in consolidations.
what is efficiency that is shown in tables
The efficiency shown in the table measures how "efficient" or smooth the FRAMA line is compared to the actual price movement.
What It Means
Efficiency = FRAMA Movement ÷ Price Movement
Values close to 0: FRAMA is very smooth/stable while price is moving significantly
Values close to 1: FRAMA is moving almost as much as the price
Values > 1: FRAMA is moving more than the raw price (rare, usually in very short periods)
Practical Interpretation
Low Efficiency (0.1 - 0.3):
FRAMA is doing a good job of smoothing out noise
Market is likely choppy/sideways
The adaptive mechanism is working - keeping the average stable during consolidation
High Efficiency (0.7 - 1.0):
FRAMA is closely following price movements
Market is likely trending strongly
The adaptive mechanism is making the average more responsive
Medium Efficiency (0.3 - 0.7):
Balanced market conditions
FRAMA is providing moderate smoothing
Trading Context
This efficiency ratio helps you understand:
Market regime: Is this a trending or ranging market?
Signal quality: Low efficiency periods might produce fewer but higher-quality signals
Adaptive performance: How well the FRAMA is adapting to current conditions
For example, if you see efficiency at 0.15, it means the FRAMA moved only 15% as much as the price did in the last bar, indicating it's successfully filtering out noise in a choppy market. If efficiency is 0.85, the FRAMA is closely tracking price, suggesting a trending environment where you want the average to be responsive.
Fast_VwapThis is a Pine Script indicator that calculates and displays Volume Weighted Average Price (VWAP) with several advanced features, including multiple anchoring methods, deviation bands, and optional machine learning enhancements.
Core Components
1. VWAP Calculation
The indicator calculates VWAP using the standard formula:
text
VWAP = Σ(Price × Volume) / Σ(Volume)
Where price can be customized (default is HLC3 - the average of high, low, and close).
2. Anchoring Methods
The indicator offers four ways to reset/start the VWAP calculation:
Session: Resets at the start of each new trading day (most common)
Lowest Low: Resets when a new 10-bar low occurs
Highest High: Resets when a new 10-bar high occurs
Fixed Length: Resets after a specified number of bars (default 20)
3. Deviation Bands
The indicator can show standard deviation bands around the VWAP:
Upper band = VWAP + (Standard Deviation × Multiplier)
Lower band = VWAP - (Standard Deviation × Multiplier)
4. Machine Learning Enhancements
Two optional ML methods can be applied to smooth the VWAP:
Simple Average: Uses an EMA (Exponential Moving Average) of the VWAP
KNN (K-Nearest Neighbors): A simplified implementation that looks at recent values to adjust the current VWAP
How It Works
Inputs: The user can configure all parameters including price source, anchoring method, band settings, and ML options.
Anchoring: The script first determines when to reset the VWAP calculation based on the selected anchoring method.
VWAP Calculation: Using the anchoring points, it calculates the cumulative price×volume and total volume to compute the VWAP and standard deviation bands.
ML Processing: If enabled, the raw VWAP value is smoothed using either a simple EMA or a KNN algorithm that looks at the most similar recent values.
Visualization: The final VWAP line is plotted along with optional deviation bands and colored fills between the bands and VWAP line.
Use Cases
Intraday Trading: When anchored to session, helps identify fair value during the trading day
Swing Trading: When using fixed length or high/low anchoring, can identify support/resistance
Trend Confirmation: Deviation bands help identify overbought/oversold conditions relative to volume-weighted price
The combination of traditional VWAP with machine learning smoothing makes this a unique tool that can potentially reduce noise while maintaining the volume-weighted price information that makes VWAP valuable.
A deviation band is a statistical tool that creates upper and lower boundaries around a central line (in this case, the VWAP) based on how much prices typically vary from that average.
How It Works
Standard Deviation Calculation
The indicator calculates how much prices deviate from the VWAP:
Measures the "spread" or volatility of prices around the VWAP
Uses the mathematical formula for standard deviation
Creates bands at a specific distance from the VWAP line
What Deviation Bands Tell You
Statistical Significance
~68% of price action typically stays within 1 standard deviation
~95% stays within 2 standard deviations
When price touches the bands, it's statistically "unusual"
Trading Signals
Price hits upper band: Potentially overbought, consider selling
Price hits lower band: Potentially oversold, consider buying
Price stays within bands: Normal price action
Price breaks outside bands: Strong momentum move
Dynamic Adjustment
High volatility periods: Bands automatically widen
Low volatility periods: Bands automatically narrow
Volume changes: Affects both VWAP and band calculations
Orange Line (Default)
What it is: The main VWAP line with machine learning enhancement
Purpose: This is the core signal line - the Volume Weighted Average Price that's been processed through your selected ML method (Simple Average, KNN, or None)
Blue Line (Default)
What it is: Upper deviation band
Purpose: Shows potential resistance level - when price reaches this band, it may indicate overbought conditions
Red Line (Default)
What it is: Lower deviation band
Purpose: Shows potential support level - when price reaches this band, it may indicate oversold conditions
DTC_SVVolume is the footprint of smart money.
This indicator helps you track it with surgical precision. DTC_SV is a powerful, all-in-one volume intelligence tool built for traders who rely on volume expansion, institutional candle footprints, and relative strength logic.
Inspired by the Traders Reality framework, this script detects and color-codes vector candles (high-volume momentum candles), provides real-time stats in a clean dashboard, and offers bar-by-bar context for smart money involvement.
🧠 Core Features
📊 Smart Vector Candle Detection
Automatically highlights candles with 1.5x or 2x relative volume.
Dynamic color coding (Green, Red, Blue, Purple) to indicate type and strength.
🟦 Live Volume Histogram with MA
Volume bars show strength and weakness with clarity.
20-period volume moving average line included for trend context.
💬 Volume Labels on Bars
Real-time labels on each vector candle showing absolute volume and % above average.
Helps you see the punch behind every candle.
📈 Advanced Dashboard Panel (Top/Bottom Corner)
Stay data-aware without clutter. The live table shows:
✅ RVOL % – Relative Volume of the current bar.
📈 Daily Trend – Based on position vs 10 & 20 EMA (from daily timeframe).
🔍 Distance to Daily EMA 10/20 – % deviation from mean.
♻️ Avg Recovery of Last 5 Vectors – A key signal for mean reversion plays.
📊 Session RVOL – How current volume stacks up within today’s session.
🧮 Avg Volume of Last 10 Vector Candles – Measures momentum strength.
🔁 Today vs Previous Day Total Volume – Real-time market participation pulse.
🚀 Use Cases
Identify true institutional candles during fake retail moves.
Measure when liquidity is being injected, not just price pushing.
Gauge whether current moves are sustainable or manipulated.
Time your entries using volume spikes + price action confluence.
Track vector candle recovery zones and exhaustion potential.
RSI Trend Flip by julzALGORSI Trend Flip by julzALGO is a smart trend-following tool that combines RSI-based logic with a clean SuperTrend-style overlay and real-time multi-timeframe confirmation.
🔹 Core Logic:
The script uses the Relative Strength Index (RSI) to identify market regime shifts.
Trend flips up when RSI crosses above 70 → bullish.
Trend flips down when RSI crosses below 50 → bearish.
An adaptive trailing line (based on ATR) follows the new trend direction.
🔹 Visual Features:
Color-coded RSI SuperTrend line on the price chart (Green = Uptrend, Red = Downtrend).
Buy/Sell signal markers on breakout events (RSI cross 70/50).
Background shading to highlight active trend regime.
🔹 RSI Trend Table (Multi-Timeframe Confirmation):
Displays RSI trend status across:
15min, 1h, 4h, and 1D timeframes.
Table includes:
📈 RSI value
🔼🔽⚫ directional signal (Up / Down / Neutral)
Updates every 10 bars and helps validate trend across broader market structure.
🧠 Ideal For:
Traders looking for a clean RSI-only trend tool.
Swing traders and scalpers who want multi-timeframe RSI confirmation.
Anyone who wants a lightweight, non-repainting trend indicator with real-time table logic.
multi_tf_trendHere is a powerful trend indicator that uses data from 3 different time frames to analyze trend direction and direction switches. You can change the timeframes with the drop down menu. The index adds up all the bull signals and subtracts bear signals. The index can help gauge a trend's longevity and strength. For example, Index of +2 is strongly bullish while an Index of -2 is strongly bearish.
DTC FX+DTC FX+ is a clean, theme-optimized session indicator for Forex traders. It features price-anchored session boxes, max/min lines, a live session status table with open/close countdowns, and a fully customizable watermark. Supports both monotone and colorful layouts, and is optimized for both dark and light TradingView themes. All session and timer logic is timezone-accurate and robust for global markets.
Major Features & Customizations:
Session Boxes:
Draws New York, London, and Tokyo session boxes, anchored to price.
In dark mode, boxes are nearly white; in light mode, boxes are light grey for maximum clarity.
Session code (NY, LDN, TKY) is centered inside each box, with text color auto-adjusting for theme (white in dark, black in light).
Session Max/Min Lines:
Dotted, thick, and dark grey for clear visibility on all themes.
Session Status Table:
Shows session status (ONLINE/OFFLINE), time until open, and time until close for each session.
Table and header text are always white in dark mode, black in light mode.
Table background and borders are theme-optimized for maximum readability.
Theme & Layout Support:
Fully optimized for both dark/black and light/white TradingView chart themes.
Toggle between monotone (grey) and colorful layouts.
Colorful layout uses distinct, vibrant colors for each session (blue, orange, magenta).
Watermark:
Customizable watermark with options for position, size, signature, separator, and color.
Default settings: watermark enabled, blue color, large size, signature "❤", separator "~", position bottom-center, show timeframe enabled, show prefix disabled.
Other Improvements:
All text and UI elements are theme-aware for maximum contrast and clarity.
All session and timer logic is timezone-accurate and handles sessions that cross midnight.
Opening Range Breakout (15 mins Range)Take the guesswork out of your trading with the Opening Range Breakout Pro script. This tool automatically marks the high and low of the first 15 minutes of the NYSE session, then highlights the first candle to break out above or below this range—removing ambiguity from your trade entries.
The opening range is one of the most powerful concepts in day trading. By identifying the price range set during the market’s first minutes, you gain a clear framework for your trades. When price breaks out above the range, it often signals a strong bullish move; a break below signals bearish momentum. This script visually marks these moments, so you can react quickly and confidently.
Why use Opening Range Breakout Pro?
• Defined Entry and Exit Points: The script gives you clear, objective breakout levels—no more guessing when to enter a trade.
• Removes Emotional Trading: With visual cues for breakouts, you can follow a systematic approach and avoid hesitation or FOMO.
• Backtested, Time-Tested Strategy: The opening range breakout has been used by professional traders for decades to capture early trends and maximize profit potential.
• High Reward Potential: By capitalizing on the volatility and momentum of the opening session, traders often catch the best moves of the day.
• Easy to Use: Just add to your chart—no configuration needed. The script works on any NYSE stock, on a 5-minute chart.
How it works:
• Draws the opening 15-minute high and low as orange lines.
• Labels the range prices for quick reference.
• Marks the first candle to close above the range with an orange ▲, and the first to close below with an orange ▼.
Take control of your trading day, remove uncertainty, and trade with confidence—just like the pros.
🕵️ Spy StepRange Hybrid v2.0NOW THATS I WANT! OH yaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaa
Aqua MTF Trend Oscillator——————————————————————————————————————————————————————————
The Aqua Multi-Timeframe (MTF) Trend Oscillator is a comprehensive momentum and trend analysis tool designed to synthesize
complex market dynamics into a single, intuitive oscillator. It moves beyond single-timeframe analysis by aggregating
trend information from up to five distinct, user-configurable sources—spanning different timeframes, symbols, and
moving average types.
--- CORE CONCEPT ---
The strength and direction of a trend are rarely uniform across all market perspectives. This indicator's core
principle is to quantify and weigh the trend's character from multiple angles simultaneously. By blending these
perspectives, it generates a composite score that reflects the overall "consensus" of trend momentum, providing
a more robust view than any single moving average could offer alone.
--- METHODOLOGY ---
The indicator's power lies in its sophisticated, multi-step normalization process for each analysis slot:
1. **MA Calculation:** A standard moving average (e.g., EMA, SMA) is calculated for the specified source, symbol, and timeframe.
2. **Volatility-Normalized Distance:** It first measures the deviation of price from its moving average in terms
of Average True Range (ATR) units. This volatility-normalization step is crucial for comparing trend strength
across different timeframes or instruments, as it measures distance in a context-aware manner.
3. **Magnitude Squashing:** This ATR-based distance is then passed through a hyperbolic tangent (`tanh`) squashing
function. This elegantly transforms the potentially unbounded measurement into a standardized score oscillating
between -1 (maximum bearish magnitude) and +1 (maximum bullish magnitude). This prevents extreme outliers in one
timeframe from disproportionately skewing the final result.
4. **Weighted Aggregation:** Each of these normalized (-1 to +1) scores is then combined based on a user-defined
weight. The weighted average of all enabled slots produces the final composite score.
5. **Final Scaling & Smoothing:** The composite score is scaled to oscillate between -100 and +100. An optional
final smoothing pass can be applied to this master line to reduce noise and clarify the overall trend.
All higher-timeframe calculations are performed correctly within their native context to ensure the indicator is
non-repainting and provides a stable, reliable output on the chart.
--- KEY FEATURES ---
• **Five Independent Analysis Slots:** Fully customize up to five sources, each with its own symbol, timeframe, MA type, period, and weight.
• **Advanced Normalization:** Utilizes ATR and the hyperbolic tangent function for robust, comparable trend magnitude scores.
• **Correct MTF Calculation:** Employs best practices for non-repainting data requests, ensuring historical and real-time results are consistent.
• **Weighted Composite Score:** Assign importance to different timeframes to tailor the oscillator to your specific analytical needs.
• **Optional Master Smoothing:** Apply a final MA to the composite score line for enhanced clarity and signal filtering.
• **Clear Visualization:** A simple, color-coded oscillator line shows the final trend score, while individual component trends can also be plotted.
--- HOW TO INTERPRET ---
• **Zero Line Cross:** A cross above 0 indicates that the weighted balance of trend components has shifted to bullish. A cross below 0 signals a shift to bearish.
• **Oscillator Magnitude:** Values approaching +100 suggest a strong, broad-based uptrend consensus. Values nearing -100 indicate a strong downtrend consensus.
• **Slope:** The slope of the oscillator line indicates the accelerating or decelerating nature of the aggregate trend momentum.
• **Divergence:** As with any oscillator, watch for divergences between price action and the oscillator, which can signal a potential exhaustion of the prevailing trend.
Author: Aquaritek
——————————————————————————————————————————————————————————
Beep Boop Enhanced - ENEXSLBeep Boop Enhanced - ENEXSL
A MACD-based momentum oscillator with trend filtering that displays signal strength in oscillating bands. Uses EMA trend confirmation to distinguish between strong and weak signals. Strong signals require complete price action alignment with the 50-period EMA trend, while weak signals indicate momentum without full trend confirmation. Includes overlay signal lines on the main chart for real-time trade signal visualization.
LVN/HVN Auto Detection [PhenLabs]📊 PhenLabs - LVN/HVN Auto Detection
Version: PineScript™ v6
📌 Description
The PhenLabs LVN/HVN Auto Detection indicator is an advanced volume profile analysis tool that automatically identifies Low Volume Nodes (LVN) and High Volume Nodes (HVN) across multiple trading sessions. This sophisticated indicator analyzes volume distribution patterns to pinpoint critical support and resistance levels where price is likely to react, providing traders with high-probability zones for entries, exits, and risk management.
Unlike traditional volume indicators that only show current activity, this tool builds comprehensive volume profiles from historical sessions and intelligently filters the most significant levels. It combines real-time volume analysis with dynamic level detection, offering both visual bubbles for immediate volume activity and persistent horizontal lines that act as ongoing support/resistance references.
🚀 Points of Innovation
Multi-Session Volume Profile Analysis - Automatically calculates and analyzes volume profiles across the last 5 trading sessions
Intelligent Level Separation Logic - Prevents overlapping signals by maintaining minimum separation between LVN and HVN levels
Dynamic Timeframe Adaptation - Automatically adjusts session lengths based on chart timeframe for optimal level detection
Real-Time Activity Bubbles - Shows volume activity strength through different bubble sizes at key levels
Persistent Line Management - Creates horizontal lines that extend until price crosses them, providing ongoing reference points
Dual Threshold System - Independent percentage-based thresholds for both LVN and HVN identification
🔧 Core Components
Volume Profile Engine : Builds 20-row volume profiles for each analyzed session, distributing volume across price levels
Level Identification Algorithm : Uses percentage-based thresholds to classify volume distribution patterns
Separation Logic : Ensures minimum distance between conflicting levels, prioritizing HVN when overlap occurs
Line Management System : Tracks active support/resistance lines and removes them when price crosses through
Volume Activity Monitor : Compares current volume to 13-period moving average for activity classification
🔥 Key Features
Customizable Thresholds : LVN threshold (5-35%, default 20%) and HVN threshold (65-95%, default 80%) for precise level filtering
Volume Activity Multiplier : Adjustable volume threshold (0.5+, default 1.5) for bubble and line creation sensitivity
Flexible Display Modes : Choose between Lines only, Bubbles only, or Both for optimal chart clarity
Smart Level Separation : Minimum separation percentage (0.1-2%, default 0.5%) prevents conflicting signals
Color Customization : Independent color controls for LVN (red) and HVN (blue) elements
Performance Optimization : Processes every 15 bars with maximum 500 active lines for smooth operation
🎨 Visualization
Colored Bubbles : Three sizes (large, medium, small) indicate volume activity strength at key levels
Horizontal Lines : Persistent support/resistance lines with width corresponding to volume activity
Dual Color System : Semi-transparent red for LVN areas, semi-transparent blue for HVN zones
Information Tooltip : Optional table showing usage guidelines and optimization tips
📖 Usage Guidelines
Volume Thresholds
LVN Threshold
○ Default: 20.0%
○ Range: 5.0-35.0%
○ Description: Price levels with volume below this percentage are marked as LVNs. Lower values create fewer, more significant levels. Typical range 15-25% works for most instruments.
HVN Threshold
○ Default: 80.0%
○ Range: 65.0-95.0%
○ Description: Price levels with volume above this percentage are marked as HVNs. Higher values create fewer, stronger levels. Range 75-85% is optimal for most trading.
Display Controls
Volume Threshold
○ Default: 1.5
○ Range: 0.5+
○ Description: Multiplier for volume significance (High=2+threshold, Medium=1+threshold, Low=0+threshold). Higher values require more volume for signals.
✅ Best Use Cases
Swing Trading : Identify key levels for position entries and exits over multiple days
Scalping : Use bubbles for immediate volume activity confirmation at critical levels
Risk Management : Place stops beyond LVN levels where price moves quickly
Breakout Trading : Monitor HVN levels for potential breakout or rejection scenarios
Multi-Timeframe Analysis : Combine with higher timeframe levels for confluence
⚠️ Limitations
Timeframe Sensitivity : Lower timeframes may produce too many levels; higher timeframes recommended for cleaner signals
Volume Data Dependency : Accuracy depends on reliable volume data from your data provider
Historical Analysis : Uses past volume data which may not predict future price behavior
Performance Impact : High number of active lines may affect chart performance on slower devices
💡 What Makes This Unique
Automated Session Analysis : No manual drawing required - automatically analyzes multiple sessions
Intelligent Filtering : Advanced separation logic prevents overlapping and conflicting signals
Adaptive Processing : Adjusts to different timeframes automatically for optimal level detection
Dual Visualization System : Combines persistent lines with real-time activity indicators
🔬 How It Works
1. Volume Profile Construction :
Analyzes the last 5 trading sessions with dynamic session length based on timeframe
Divides each session’s price range into 20 equal levels for volume distribution analysis
2. Level Classification :
Calculates volume percentage at each price level relative to session maximum
Identifies LVN levels below threshold and HVN levels above threshold
3. Signal Generation :
Creates bubbles when volume activity exceeds thresholds at identified levels
Draws horizontal lines that persist until price crosses through them
💡 Note : For optimal results, increase your chart timeframe if you see too many levels. The indicator performs best on 15-minute and higher timeframes where volume patterns are more meaningful and less noisy.