Mulakan

VOLUMEBREAKOUT

Volume Heat Map by Green SquadThe Volume Heat Map measures relative participation intensity by normalizing current volume against its moving average. Instead of displaying raw volume, the indicator evaluates how active the market is relative to its recent baseline, allowing volume to adapt across timeframes, instruments, and changing volatility regimes. Core Logic At its foundation: Relative Volume = Volume / SMA(Volume, Length) 1.0 → Above-average participation < 1.0 → Below-average participation This relative ratio is classified into participation regimes: Cold → Weak activity Normal → Baseline conditions Warm → Expanding interest Hot → Strong engagement Very Hot → Aggressive order flow This transforms volume from a raw histogram into a structured participation state model. Bullish vs Bearish Classification Relative volume is paired with candle direction: Green spectrum → Bullish participation expansion Red spectrum → Bearish participation expansion This allows instant assessment of: Who is initiating pressure Whether momentum is supported by liquidity Whether a move is commitment-driven or thin The indicator does not measure delta, but it approximates initiative bias through price acceptance within the bar. Volume-Weighted Breakouts Breakouts are only highlighted when: Price exceeds a defined structural range Relative volume exceeds a minimum threshold This filters low-liquidity fakeouts and emphasizes breakouts supported by real participation. The logic reflects a fundamental auction principle: Structural expansion requires participation to sustain. Practical Application This indicator is diagnostic, not predictive. It is best used to: Confirm breakout strength Validate continuation setups Filter weak signals Detect early participation expansion before volatility expansion Volume expansion often precedes structural shifts. This tool isolates that transition in real time. Stay tuner for more trading tools.
Penunjuk Pine Script®
oleh Green_Squad
Volume Conviction Index v1.0Volume Conviction Index (VCI) v1.0 This indicator helps answer a simple question: Does this price move have real strength behind it, or is the volume too weak to trust??? It measures "conviction" through how many participants are in the marketplace by looking at volume in a smart, reliable way: - Spots unusual volume surges (buying or selling pressure) that stand out from normal (median line plotted) levels. - visually helps with discretionary calls and allows the median avg of participation not just volume to be 'seen' - Blends recent volume changes with how volume compares to its typical range. How to read the chart (super straightforward): - Teal columns above the zero line: Strong buying conviction — volume supporting the up move (good sign for breakouts or holds). - Orange columns below zero: Strong selling conviction — heavy participation on the downside (watch for reversals or weakness on rallies). - Flat/small bars near zero: Low conviction — price might be moving on fumes (often leads to fakeouts or quick fades). - Optional white dashed line (the "median conviction"): A smoothed version over the last few bars. If it crosses zero or diverges from price, it can signal shifting momentum. index works the same for both bears and bulls. teal bars in the positive are above participation or conviction in both bearish and bullish participation. also allows identifying exhaustion in both bearish and bullish scenarios. works well equally on lower TFs and higher TFs Why use it: It uses robust statistics (rolling median volume + Median Absolute Deviation for a "z-like" score) instead of plain averages — much better at handling noisy or outlier-heavy markets like crypto, forex, or stocks during news events. Then it adds a weighted mix of short-term volume acceleration and relative volume for better context. Great for: - Beginners: Start with defaults — the colors and zero line make it easy to see at a glance. - Day/swing traders: Filter entries/exits with real participation (e.g., teal spike on support bounce = higher odds). - Anyone learning volume: Shows clearly when moves have "muscle" vs. when they're suspect. Quick usage tips: - Best on 5m to 4h charts with good volume data. - Combine with price action, levels, or your favorite tools — use VCI to confirm conviction. - Toggle the median line in settings if your timeframe is noisy. Defaults work well across most assets — adjust "Volume Window" for longer/shorter lookback, or "Recent Weight" to emphasize sudden changes more/less. I personally like using it on 1min / 5min / 30min charts. Has a microscope / high-rez feel about it when I'm on quicker TFs. Open-source under © RU55IANROUL3TT3 — feel free to study, fork, or build on it! Feedback welcomed — what markets/timeframes does it help you with?
Penunjuk Pine Script®
oleh RU55IANROUL3TT3
Clusters Volume Profile [LuxAlgo]The Clusters Volume Profile indicator utilizes K-Means clustering to categorize historical price action into distinct groups and generates individual volume profiles for each detected cluster. This tool provides a unique perspective on volume distribution by isolating price behaviors based on proximity rather than strictly chronological order. 🔶 USAGE The indicator identifies "clusters" of price activity within a user-defined lookback period. Each cluster is assigned a unique color and its own horizontal volume profile, allowing traders to see where liquidity is most concentrated within specific price regimes. 🔹 Identifying Institutional Zones Traders can use the Point of Control (POC) of high-volume clusters to identify significant institutional interest. Because the K-Means algorithm groups price action by density rather than time, a cluster's POC often represents a "fair value" level where significant exchange occurred. These dashed POC lines frequently act as robust support or resistance levels when price returns to them in the future. 🔹 Market Regime Detection By observing the vertical distribution and overlap of clusters, traders can identify market phases. Overlapping clusters with high volume often indicate accumulation or distribution phases (sideways markets), whereas distinct, vertically separated clusters with lower volume gaps between them suggest a trending environment. A shift from multiple overlapping clusters to a new, isolated cluster can signal a breakout or the start of a new trend. 🔹 Precision Entry & Exits Cluster boundaries and POC lines provide concrete levels for trade management. An entry can be sought when price retests a high-volume cluster POC, while stops can be placed outside the total price range of that specific cluster (the area covered by its volume profile). Conversely, targets can be set at the POC of the next major cluster above or below current price action. 🔹 Volume Conviction The tool provides specific volume metrics that allow traders to gauge conviction. By comparing the "Total" volume label of one cluster against another, a trader can determine which price regime had more participation. A breakout into a price zone with a high-volume cluster suggests stronger conviction and a higher probability of the level holding compared to a zone with low total volume. 🔶 DETAILS The script employs a K-Means clustering algorithm. This process involves: Initializing "centroids" across the price range of the lookback period. Iteratively assigning each price bar to the nearest centroid based on the HLC2 (median) price. Recalculating centroids based on the volume-weighted average price of the assigned bars. Finalizing assignments after the specified number of iterations to ensure stable clusters. By separating price action into these clusters, the tool helps identify high-interest zones that might be obscured by a single, traditional Volume Profile. 🔶 SETTINGS 🔹 Clustering Settings Lookback Period: Determines the number of recent bars used for the clustering analysis. Number of Clusters: Sets how many distinct price groups the algorithm should attempt to find (2 to 10). K-Means Iterations: Controls the number of times the algorithm refines the cluster centers. Higher values can lead to more stable results. 🔹 Volume Profile Settings Rows per Cluster VP: Defines the vertical resolution (number of bins) for each individual cluster's profile. Max VP Width (Bars): Sets the maximum horizontal length of the volume profile histograms. VP Offset: Adjusts the horizontal spacing between the current bar and the start of the volume profiles. Highlight Price Dots: Toggles the visibility of the colored dots on the price action to identify cluster assignments. Dot Size: Adjusts the size of the cluster assignment dots on the chart, ranging from tiny to huge.
Penunjuk Pine Script®
oleh LuxAlgo
11
Blockcircle Price Gaps (PG)I got tired of price gap indicators that dump every zone on the chart and leave you to figure out which ones actually matter. I have tried every single one imaginable. Therefore, I built this one to score each gap automatically based on how close it is, how it formed, and whether it aligns with the trend. Instead of cryptic numbers, it just tells you: Strong, Moderate, or Weak, plus how far away it is. You see what matters, skip what doesn't. Hopefully, you find it helpful! If you have other ideas to improve it even further, please let me know, and I can integrate them. WHAT MAKES IT ORIGINAL AND DIFFERENT Standard gap indicators display every detected imbalance with identical visual treatment, leaving traders to manually assess which zones matter. This creates cluttered charts and analysis paralysis. This BLOCKCIRCLE PRICE GAPS (PG) indicator solves that problem with a Relevance Engine that automatically scores each gap from 0 to 100 and translates scores into plain language: Strong, Moderate, or Weak. Each zone displays its strength rating and distance from the current price, so you instantly know which gaps deserve attention and how far the price must travel to reach them. The scoring combines four factors that research shows correlate with zone effectiveness: Proximity: Gaps closer to the current price score higher because nearby zones influence immediate price action more than distant ones. Formation Volume: Gaps created during above-average volume suggest institutional activity rather than random price movement. Impulse Strength: Gaps formed by strong moves (measured against ATR) indicate genuine supply/demand imbalance rather than noise. Trend Alignment: Support gaps in uptrends and resistance gaps in downtrends receive bonus points for trading with momentum. Visual intensity reflects strength automatically. Strong zones appear darker and more prominent. Weak zones fade into the background. You see what matters without decoding numbers. HOW IT WORKS Price Gaps form when aggressive buying or selling creates an imbalance, leaving unfilled space between candles. These zones often act as support (bullish gaps below price) or resistance (bearish gaps above price) when the price returns to them. Detection uses the standard three-candle method: a bullish gap exists when the current low exceeds the high from two bars prior. A bearish gap exists when the current high falls below the low from two bars prior. What makes this implementation different is continuous relevance tracking . Each bar, every gap receives an updated score based on current conditions . As the price moves away, the proximity scores decrease. As gaps age, time decay gradually reduces their overall relevance. When capacity limits are reached, the lowest-scoring gap is removed first, ensuring your chart always shows the most actionable zones. Labels show practical information: Strength rating (Strong, Moderate, or Weak) Zone type (Support or Resistance) Distance from current price with direction (+12% means above, -8% means below) FEATURES Relevance scoring with automatic strength classification Plain-language labels showing strength and distance Color intensity that reflects zone importance Retest detection when price returns to unfilled gaps Proximity filtering to hide distant zones Age filtering to remove stale gaps Size filtering for minimum and maximum gap thresholds Relevance-based capacity management Information panel with zone counts and trend context Multiple label style options HOW THE COMPONENTS WORK TOGETHER The system operates as a filtering pipeline: Size filters remove gaps that are too small (market noise) or too large (extreme events unlikely to fill). The Relevance Engine scores qualifying gaps based on proximity, volume, impulse, and trend. Gaps below the minimum score threshold are hidden. Proximity and age filters remove distant or stale gaps. When at capacity, the lowest-scoring gap is removed to make room for new detections. This layered approach ensures only the most relevant gaps appear on your chart. CONFIGURABLE SETTINGS Display Settings control how many zones appear and how they are displayed. Label Style lets you choose what information displays: Strength plus Distance (default), Strength Only, Distance Only, Score Only, or None. Relevance Engine settings include the master toggle and minimum score threshold. The Scoring Weights section allows advanced users to adjust how much each factor contributes. Filters control size thresholds, maximum distance from price, and maximum age in bars. Retest Alerts notify you when the price returns to an unfilled gap with three sensitivity options. Zone Behavior controls whether filled gaps are removed and what counts as a filled gap. HOW TO USE The default settings work well for most timeframes and markets. Strong zones (shown in brighter colors with yellow text) have multiple factors aligned and deserve the most attention. Moderate zones are worth watching. Weak zones provide context but may not produce reliable reactions. For active trading, focus on Strong and Moderate zones within 10% of the current price. These are the most likely to influence near-term price action. For swing trading, expand the Maximum Distance setting to see zones further from the price that may become relevant as trends develop. When the Retest alert fires, the price is returning to an unfilled gap. Evaluate the zone strength, look for price reaction at the zone boundary, and consider whether the move aligns with the broader trend before trading. The information panel shows: Support: Count of bullish gaps (potential buying zones) Resistance: Count of bearish gaps (potential selling zones) Unfilled: Zones not yet touched by price Avg Strength: Overall quality of visible zones Trend: Current direction based on EMA alignment LIMITATIONS Relevance scoring is probabilistic, not predictive. A Strong gap is more likely to produce a reaction based on historical patterns, but any zone can fail. The trend component uses EMA crossovers (20/50/200), which may lag in choppy markets. Distance calculations update each bar. During volatile moves, labels may briefly show different values as price swings. DEFAULTS These are the defaults, but you would adjust and calibrate it to a specific asset, as needed: Maximum Zones: 12 Label Style: Strength + Distance Minimum Score: 20 Maximum Distance: 25% Maximum Age: 300 bars If you have any questions at all, please ask away!
Penunjuk Pine Script®
oleh blockcircle
Luminous Volume Flow [Pineify]Luminous Volume Flow The Luminous Volume Flow is a specialized volume-based momentum oscillator designed to uncover the underlying buying and selling pressure within the market. Unlike traditional volume indicators that simply aggregate volume based on the close relative to the open, LVF analyzes intrabar dynamics—specifically the relationship between the close price and the high/low wicks—to estimate the dominance of buyers or sellers. By smoothing this raw volume delta and applying a signal line, the LVF provides a clear visual representation of volume flow, helping traders identify trend strength, potential reversals, and momentum shifts with high-definition "luminous" visuals. Key Features Intrabar Pressure Analysis : Calculates buying and selling pressure based on wick dynamics and price polarity to provide a more granular view of market sentiment. Multi-Type Smoothing : Offers selectable Moving Average types (SMA, EMA, RMA) for the main Flow Line to adapt to different market volatilities. Luminous Visuals : Utilizes dynamic color gradients that brighten as momentum expands and darken as it contracts, offering immediate visual feedback on trend intensity. Sentiment Cloud : Fills the area between the Flow and Signal lines to clearly visualize the prevailing bullish or bearish sentiment. High-Contrast Signals : Optional high-contrast signal markers for clear crossover identification. How It Works The LVF operates on a multi-stage calculation process: Pressure Calculation : The script compares the lower wick (Close - Low) against the upper wick (High - Close). If the lower wick is longer, it suggests buying pressure (rejection of lower prices), and volume is assigned to Buy Pressure . If the upper wick is longer, it suggests selling pressure (rejection of higher prices), and volume is assigned to Sell Pressure . If equal, the Close > Open polarity is used as a tie-breaker. Raw Delta : The difference between Buy and Sell Pressure is calculated to determine the net volume flow for the bar. Flow Line : The Raw Delta is smoothed using a user-selected Moving Average (SMA, EMA, or RMA) over the Flow Length period. This creates the main oscillator line. Signal Line : An EMA of the Flow Line is calculated to generate the Signal Line, similar to the MACD mechanic. Histogram : The difference between the Flow Line and Signal Line determines the Histogram, which drives the "Luminous" color gradient logic. Trading Ideas and Insights Trend Confirmation : When the Flow Line is above the Signal Line and the Cloud is green, the bullish trend is supported by volume. Conversely, a red cloud indicates bearish volume dominance. Momentum Crossovers : The triangle shapes indicate crossovers between the Flow and Signal lines. A triangle up (Green) suggests a potential bullish entry or invalidation of a short bias. A triangle down (Red) suggests a bearish turn. Expansion vs. Contraction : Pay attention to the brightness of the histogram columns. Bright colors indicate expanding momentum (a strong move), while darker, fading colors suggest the move is losing steam, potentially preceding a consolidation or reversal. How multiple components work together This script combines the logic of Volume Delta analysis with Signal Line Crossover mechanics (popularized by MACD). By applying trend-following smoothing to raw volume data, we transform erratic volume spikes into a coherent flow. The "Luminous" visual layer is added to make the data interpretation intuitive—removing the need to mentally calculate the rate of change based on histogram height alone. Unique Aspects Adaptive Gradient Coloring : The histogram doesn't just show positive/negative values; it visually communicates the *acceleration* of the move via color intensity based on standard deviation. Wick-Based Volume Attribution : Instead of a binary close-to-open comparison, LVF respects the price action within the candle (the wicks), acknowledging that a long lower wick on a red candle can actually represent significant buying interest. How to Use Add the indicator to your chart. Adjust the Flow Length to match your trading timeframe (lower for scalping, higher for swing trading). Select your preferred Smoothing Type (EMA is default and recommended for responsiveness). Use the "Sentiment Cloud" filter: Look for long signals only when the cloud is green, and short signals when the cloud is red. Monitor the Luminous Histogram for signs of exhaustion (colors fading) to manage exits. Customization Flow Length : Period for the main smoothing (Default: 14). Signal Length : Period for the signal line (Default: 9). Smoothing Type : Choose between SMA, EMA, or RMA. Colors : Fully customizable colors for Bullish/Bearish phases and signals. Chart Bars : Option to color the main chart candles based on the Flow direction. Conclusion The Luminous Volume Flow is a robust tool for traders who want to go beyond price action and understand the volume dynamics driving the market. By visualizing the flow of buying and selling pressure with advanced smoothing and reactive visuals, it provides a clearer picture of market sentiment than standard volume bars.
Penunjuk Pine Script®
oleh Pineify
High Volume Footprint BreakoutThe High Volume Footprint Breakout indicator brings institutional-grade Order Flow analysis to your standard TradingView charts. By looking inside the candles using intrabar data, this tool identifies specific price levels where massive, aggressive buying or selling volume has occurred. Unlike standard Volume Profiles which show volume over a long period, this indicator isolates specific moments of high-intensity participation. It draws extended support and resistance lines from these "High Volume Nodes," helping you identify where institutions have stepped in and where trapped traders might exist. Why Use This Indicator? Standard candlestick charts show you where price went, but they hide how it got there. A candle might look normal, but inside that candle, there could be a massive battle between buyers and sellers at a specific price level. Reveal Hidden Liquidity : Find the exact price levels that defended a move. Filter the Noise : Instead of showing every volume node, this script only highlights Breakout Levels —areas where the single-price volume exceeded a historical maximum (e.g., the highest volume node in the last 20 bars). No External Tools Needed : Replicates the logic of professional Footprint/Order Flow software using native TradingView data. How It Works (The Logic) This script uses a strict algorithm to reconstruct a virtual "Footprint" of the market: Intrabar Analysis : It accesses lower timeframe data (e.g., 1-minute data inside a Daily bar) to analyze price action at a granular level. Volume Categorization : It separates volume into Buy Volume (Aggressive Buyers) and Sell Volume (Aggressive Sellers) based on price movement logic. Volume Distribution : To ensure accuracy, it distributes the volume of intrabar candles across their High-Low range, preventing artificial volume spikes on single ticks. Breakout Detection : It compares the highest volume node of the current bar against the highest nodes of the previous X bars. If the current volume is a new local record, a line is drawn. How to Trade This Indicator 1. The Standard Rejection (Trend Continuation) Green Lines (Aggressive Buyers) : These levels represent areas where buyers stepped in with massive force. In an uptrend, expect price to bounce off these lines. Treat them as Support. Red Lines (Aggressive Sellers) : These levels represent areas where sellers unloaded heavy positions. In a downtrend, expect price to reject these lines. Treat them as Resistance. 2. The "Flip" Setup (Trapped Traders) This is an advanced Order Flow concept. When the market disrespects a high-volume level, it creates "Trapped Traders." Red Line Acting as Support : If price breaks above a Red (Sell) line and holds, the aggressive sellers at that level are now trapped underwater. When price returns to this line, these sellers often buy to close their positions at breakeven, fueling a bounce. Green Line Acting as Resistance : If price breaks below a Green (Buy) line, the aggressive buyers are trapped. When price rallies back to this line, they often sell to exit, creating resistance. Settings & Configuration Auto-Select Intrabar Timeframe : Enabled (Recommended) : Automatically selects the best resolution (1-min for Intraday/Daily, 60-min for Weekly/Monthly) to match the "Volume Data Source" standards. Disabled : Allows you to manually force a specific intrabar resolution. Breakout Lookback Period : Determines how significant a volume spike must be to trigger a line. (Default: 20). Higher values = fewer, stronger lines. Max Visible Lines : Limits the number of lines on the chart to keep your workspace clean. Label Offset : Adjusts how far to the right the text labels appear, allowing you to position them perfectly for your screen setup. Who Should Use This? Order Flow Traders : Who want footprint-style logic without complex grid charts. Price Action Traders : Who want objective, data-driven Support & Resistance levels rather than subjective drawings. Scalpers & Day Traders : Who need to see where the "heavy hands" are transacting in real-time. Disclaimer & Limitations Intrabar vs. Tick Data : This script uses TradingView's intrabar data to approximate the footprint. While highly accurate, it may differ slightly from tick-perfect software. Volume Data Required : This indicator requires the asset to provide real volume data. It works best on Futures, Crypto, and Stocks. It may not work on FOREX pairs that do not provide tick volume. Does it Repaint? Short Answer: No , it does not repaint on closed bars. Once a candle closes and a line is drawn, that line is permanent and will not move or disappear. Long Answer (The Nuances): There are two specific scenarios you need to be aware of regarding how TradingView handles data: 1. The "Forming Bar" (Wait for Close) Behavior : While the current candle is still moving (open), the indicator is calculating the volume in real-time. If a massive volume spike happens right now, a line might appear. If the volume of previous bars suddenly looks smaller by comparison, the condition might change. Solution : Like almost all indicators, you must wait for the bar to close to confirm the signal. Once the bar closes, the calculation is locked and the line is fixed forever. 2. Historical Data Limits (The "Disappearing History" Issue) Behavior : This script relies on request.security_lower_tf (e.g., fetching 1-minute data inside a Daily bar). TradingView does not store infinite 1-minute data for every asset. They usually store a few thousand bars of lower timeframe history (more if you have a Premium account). The Issue : If you scroll back 5 years on a Daily chart, the script will try to fetch the 1-minute data for a day in 2019. If TradingView has deleted that old 1-minute data to save space, the script will receive "empty" data. Result : You might see lines on the recent chart (last few months/year), but if you scroll back too far, the lines will stop appearing because the underlying data doesn't exist anymore. Is this Repainting? Technically, no. It's a Data Availability limitation. But it means that what you see on a chart from 5 years ago might look different than what you saw when you were trading it live 5 years ago. Disclaimer For Educational and Informational Purposes Only This indicator is provided for educational and informational purposes only and DOES NOT constitute financial, investment, or trading advice. The "High Volume Footprint Breakout" tool is based on historical data analysis and algorithmic interpretation of market volume; it does not predict future market movements with certainty. Risk Warning Trading in financial markets (Stocks, Crypto, Futures, Forex, etc.) involves a high degree of risk and may not be suitable for all investors. You could lose some or all of your initial investment. Past performance of any trading system or methodology is not necessarily indicative of future results. No Liability The author of this script assumes no responsibility or liability for any errors or omissions in the content of this indicator, or for any trading losses or damages incurred as a result of using this tool. Users are solely responsible for their own trading decisions and should always use proper risk management. By using this script, you acknowledge and agree to these terms.
Penunjuk Pine Script®
oleh abgthecoder
1
SNIPER Trend Continuation V1TC SNIPER (Trend Continuation) ### When to Use - Market is **OUT OF BALANCE** (trending, momentum) - Clear **displacement** away from prior value - **New York session** (AVOID London open fakeouts!) - Strong directional moves with follow-through ### The Setup Sequence ``` 1. IMPULSE DETECTED └── Strong directional move (2× ATR+) └── Multiple momentum bars └── Price above/below fast EMA 2. LVN ZONE IDENTIFIED └── 23.6% - 61.8% Fibonacci retracement └── Low volume pullback area 3. PRICE PULLS BACK TO LVN └── Retraces into the zone └── Volume decreases (exhaustion) 4. AGGRESSION CONFIRMATION └── Entry candle in trend direction └── Volume spikes (1.3×+ average) └── Fat body, minimal adverse wick └── EMA alignment confirms trend 5. ENTRY → TARGET: PREV POC ```
Penunjuk Pine Script®
oleh alexandrodisla
SNIPER Mean Reversion V1MR SNIPER (Mean Reversion) ### When to Use - Market is **IN BALANCE** (ranging, consolidating) - Price **breaks out but FAILS** to hold - **London session** or compressed summer conditions - Failed breakouts returning to value ### The Setup Sequence ``` 1. BALANCE DETECTED └── Price rotating around POC 2. BREAKOUT ATTEMPT └── Price pushes beyond Value Area 3. FAILURE + RECLAIM ← KEY MOMENT └── Price comes BACK inside balance └── DO NOT trade first move back! 4. PULLBACK INTO LVN └── Wait for pullback after reclaim 5. AGGRESSION CONFIRMATION └── Entry candle shows buy/sell pressure └── Volume elevated (1.2×+ average) └── Fat body (60%+ of range) 6. ENTRY → TARGET: POC ``` ### Signal Labels - **MR↑** = Mean Reversion Long (failed breakdown) - **MR↓** = Mean Reversion Short (failed breakout) - **S/A/B** = Signal quality tier ### Risk Management - **Stop**: Below recent low (long) / Above recent high (short) - **Target**: POC (center of value) - **Risk**: 0.25-0.5% per trade
Penunjuk Pine Script®
oleh alexandrodisla
MorphWave Bands [JOAT]MorphWave Bands - Adaptive Volatility Envelope System MorphWave Bands create a dynamic price envelope that automatically adjusts its width based on current market conditions. Unlike static Bollinger Bands, this indicator blends ATR and standard deviation with an efficiency ratio to expand during trending conditions and contract during consolidation. What This Indicator Does Plots adaptive upper and lower bands around a customizable moving average basis Automatically adjusts band width using a blend of ATR and standard deviation Detects volatility squeezes when bands contract to historical lows Highlights breakouts when price moves beyond the bands Provides squeeze alerts for anticipating volatility expansion Adaptive Mechanism The bands adapt through a multi-step process: // Blend ATR and Standard Deviation blendedVol = useAtrBlend ? (atrVal * 0.6 + stdVal * 0.4) : stdVal // Normalize volatility to its historical range volNorm = (blendedVol - volLow) / (volHigh - volLow) // Create adaptive multiplier adaptMult = baseMult * (0.5 + volNorm * adaptSens) This creates bands that respond to market regime changes while maintaining stability. Squeeze Detection A squeeze is identified when band width drops below a specified percentile of its historical range: Background highlighting indicates active squeeze conditions Low percentile readings suggest compressed volatility Squeeze exits often precede directional moves Inputs Overview Band Length — Period for basis calculation (default: 20) Base Multiplier — Starting band width multiplier (default: 2.0) MA Type — Choose from SMA, EMA, WMA, VWMA, or HMA Adaptation Lookback — Historical period for normalization (default: 50) Adaptation Sensitivity — How much bands respond to volatility changes Squeeze Threshold — Percentile below which squeeze is detected Dashboard Information Current trend direction relative to basis and bands Band width percentage Squeeze status (Active or None) Efficiency ratio Current adaptive multiplier value How to Use It Look for squeeze conditions as potential precursors to breakouts Use band touches as dynamic support/resistance references Monitor breakout signals when price closes beyond bands Combine with momentum indicators for directional confirmation Alerts Upper/Lower Breakout — Price exceeds band boundaries Squeeze Entry/Exit — Volatility compression begins or ends Basis Crosses — Price crosses the center line This indicator is provided for educational purposes. It does not constitute financial advice. — Made with passion by officialjackofalltrades
Penunjuk Pine Script®
oleh officialjackofalltrades
Kinetic EMA & Volume with State EngineKinetic EMA & Volume with State Engine (EMVOL) 1. Introduction & Concept The EMVOL indicator converts a dense family of EMA signals and volume flows into a compact “state engine”. Instead of looking at individual EMA lines or simple crossovers, the script treats each EMA as part of a kinetic vector field and classifies the market into interpretable states: - Trend direction and strength (from a grid of prime‑period EMAs). - Volume regime (expansion, contraction, climax, dry‑up). - Order‑flow bias via delta (buy versus sell volume). - A combined scenario label that summarises how these three layers interact. The goal is educational: to help traders see that moving averages and volume become more meaningful when observed as a structure, not as isolated lines. EMVOL is therefore designed as a real‑time teaching tool, not as an automatic signal generator. 2. Volume Settings Group: “Volume Settings” A. Calculation Method - Geometry (Source File) – Default mode. Buy and sell volume are estimated from each candle’s geometry: the close is compared to the high/low range and the bar’s total volume is split proportionally between buyers and sellers. This approximation works on any TradingView plan and does not require lower‑timeframe data. - Intrabar (Precise) – Reconstructs buy/sell volume using a lower timeframe via requestUpAndDownVolume(). The script asks TradingView for historical intrabar data (e.g., 15‑second bars) and builds buy/sell volume and delta from that stream. This mode can produce a more accurate view of order flow, but coverage is limited by your account’s history limits and the symbol’s available lower‑timeframe data. B. Intrabar Resolution (If Precise) - Intrabar Resolution (If Precise) – Selected only when the calculation method is “Intrabar (Precise)”. It defines which lower timeframe (for example 15S, 30S, 1m) is used to compute up/down volume. Smaller intrabar timeframes may give smoother and more granular deltas, but require more historical depth from the platform. When “Intrabar (Precise)” is active, the dashboard’s extended section shows the resolution and the number of bars for which precise volume has been successfully retrieved, in the format: - Mode: Intrabar (15S) – where N is the count of bars with valid high‑resolution volume data. In Geometry mode this counter simply reflects the processed bars in the current session. 3. Kinetic Vector Settings Group: “Kinetic Vector” A. Vector Window - Vector Window – Controls the temporal smoothing applied to the aggregated vectors (trend, volume, delta, etc.). Internally, each bar’s vector value is averaged with a simple moving window of this length. - Shorter windows make the state engine more reactive and sensitive to local swings. - Longer windows make the states more stable and better suited to higher‑timeframe structure. B. Max Prime Period - Max Prime Period – Sets the largest prime number used in the EMA grid. The engine builds a family of EMAs on prime lengths (2, 3, 5, 7, …) up to this limit and converts their slopes into angles. - A higher limit increases the number of long‑horizon EMAs in the grid and makes the vectors sensitive to broader structure. - A lower limit focuses the analysis on short- and medium‑term behaviour. C. Price Source - Price Source – The price series from which the kinetic EMA grid is built (e.g., Close, HLC3, OHLC4). Changing the source modifies the context that the state engine is reading but does not change the core logic. 4. State Engine Settings Group: “State Engine Settings” These inputs define how the continuous vectors are translated into discrete states. A. Trend Thresholds - Strong Trend Threshold – Value above which the trend vector is treated as “extreme bullish” and below which it is “extreme bearish”. - Weak Trend Threshold – Inner boundary between neutral and directional conditions. Roughly: - |trend| < weak → Neutral trend state. - weak < |trend| ≤ strong → Bullish/Bearish. - |trend| > strong → Extreme Bullish/Extreme Bearish. B. Volume Thresholds - Volume Climax Threshold – Upper bound at which volume is considered “climax” (unusually expanded participation). - Volume Expansion Threshold – Boundary for normal expansion versus contraction. Conceptually: - Volume above “expansion” indicates increasing activity. - Volume near or above “climax” marks extreme participation. - Negative values below the symmetric thresholds map to contraction and extreme dry‑up (liquidity vacuum) states. C. Delta Thresholds - Strong Delta Threshold – Cut‑off for extreme buying or selling dominance in delta. - Weak Delta Threshold – Threshold for mild buy/sell bias versus neutral order flow. Combined with the sign of the delta vector, these thresholds classify order flow as: - Extreme Buy, Buy‑Dominant, Neutral, Sell‑Dominant, Extreme Sell. D. State Hysteresis Bars - State Hysteresis Bars – Minimum number of bars for which a new state must persist before the engine commits to the change. This prevents the dashboard from flickering during fast spikes and emphasises persistent market behaviour. - Smaller values switch states quickly; larger values demand more confirmation. 5. Visual Interface Group: “Visual Interface” A. Ribbon Base Color - Ribbon Base Color – Base hue for the multi‑layer EMA ribbon drawn around price. The script plots a dense grid of hidden EMAs and fills the gaps between them to form a semi‑transparent band. Narrow, overlapping bands hint at compression; wider separation hints at dispersion across EMA horizons. B. Show Dashboard - Show Dashboard – Toggles the on‑chart table which summarises the current state engine output. Disable this if you only want to keep the EMA ribbon and volume‑based structure on the price chart. C. Color Theme - Color Theme – Switch between a dark and light style for the dashboard background and text colours so that the table matches your chart theme. D. Table Position - Table Position – Places the dashboard at any corner or edge of the chart (Top / Middle / Bottom × Left / Centre / Right). E. Table Size - Table Size – Changes the dashboard’s text size (Tiny, Small, Normal, Large). Use a larger size on high‑resolution screens or when streaming. F. Show Extended Info - Show Extended Info – Adds diagnostic rows under the main state summary: - Mode / Primes / Vector – Shows the current calculation mode (Geometry / Intrabar), the selected intrabar resolution and coverage in bars ( ), how many prime periods are active, and the vector window. - Values – Displays the current aggregated vectors: - P: price vector - V: volume vector - B: buy‑volume vector - S: sell‑volume vector - D: delta vector Values are bounded between ‑1 and +1. - Volume Stats – Prints the last bar’s raw buy volume, sell volume and delta as formatted numbers. - Footer – A final row with the symbol and current time: #SYMBOL | HH:MM. These extended rows are meant for inspecting how the engine is behaving under the hood while you scroll the chart and compare different assets or timeframes. 6. Language Settings Group: “Language Settings” - Select Language – Switches the entire dashboard between English and Turkish. The underlying calculations and scenario logic are identical; only the labels, titles and comments in the table are translated. 7. Dashboard Structure & Reading Guide The table summarises the current situation in a few rows: 1. System Header – Shows the script name and the active calculation method (“Geometry” or “Intrabar”). 2. Scenario Title – High‑level description of the current combined scenario (e.g., “Trending Buy Confirmed”, “Sideways Balanced”, “Bull Trap”, “Blow‑Off Top”). The background colour is derived from the scenario family (trending, compression, exhaustion, anomaly, etc.). 3. Bias / Trend Line – States the dominant trend bias derived from the trend vector (Extreme Bullish, Bullish, Neutral, Bearish, Extreme Bearish). 4. Signal / Consideration Line – A short sentence giving qualitative guidance about the current state (for example: continuation risk, exhaustion risk, trap‑like behaviour, or compression). This is deliberately phrased as a consideration, not as a direct trading signal. 5. Trend / Volume / Delta Rows – Three separate rows explain, in plain language, how the trend, volume regime and delta are classified at this bar. 6. Extended Info (optional) – Mode / primes / vector settings, current vector values, and last‑bar volume statistics, as described above. Together, these rows are meant to be read as a narrative of what price, volume and order‑flow are doing, not as mechanical instructions. 8. State Taxonomy The state engine organizes market behaviour in three stages. 8.1 Trend States (from the Price Vector) - Extreme Bullish Trend – The prime‑grid price vector is strongly upward; most EMAs are aligned to the upside. - Bullish Trend – Upward bias is present, but less extreme. - Neutral Trend – EMAs are mixed or flat; price is effectively sideways relative to the grid. - Bearish Trend – Downward bias, with the EMA grid sloping down. - Extreme Bearish Trend – Strong downside alignment across the grid. 8.2 Volume Regime States (from the Volume Vector) - Volume Climax (Buy‑Side) – Strong positive volume vector; participation is unusually high in the current direction. - Volume Expansion – Activity above normal but below the climax threshold. - Neutral Volume – No major expansion or contraction versus recent history. - Volume Contraction – Activity is drying up compared with the past. - Extreme Dry‑Up / Liquidity Vacuum – Very low participation; the market is thin and prone to slippage. 8.3 Delta Behaviour States (from the Delta Vector) - Extreme Buy Delta – Buying pressure dominates strongly. - Buy‑Dominant Delta – Buy volume exceeds sell volume, but not at an extreme. - Neutral Delta – Buy and sell flows are roughly balanced. - Sell‑Dominant Delta – Selling pressure dominates. - Extreme Sell Delta – Aggressive, one‑sided selling. 8.4 Combined Scenario State s EMVOL uses the three base states above to generate a single scenario label. These scenarios are designed to be read as context, not as entry or exit signals. Trending Scenarios 1. Trending Buy Confirmed - Bullish or extreme bullish trend, supported by expanding or climax volume and buy‑side delta. - Educational idea: a healthy uptrend where both participation and order flow agree with the direction. 2. Trending Buy – Weak Volume - Bullish trend, but volume is neutral, contracting or in dry‑up while delta is still buy‑side. - Educational idea: price is advancing, yet participation is thinning; trend continuation becomes more fragile. 3. Trending Sell Confirmed - Bearish or extreme bearish trend, with expanding or climax volume and sell‑side delta. - Educational idea: strong downtrend with both volume and order‑flow confirmation. 4. Trending Sell – Weak Volume - Bearish trend, but volume is neutral, contracting or very low while delta remains sell‑side. - Educational idea: downside continues but with limited participation; vulnerable to short‑covering. Sideways / Range Scenarios 5. Sideways Balanced - Neutral trend, neutral delta, neutral volume. - Classic range environment; low directional edge, suitable for observation and context rather than trend trading. 6. Sideways with Buy Pressure - Neutral trend, but buy‑side delta is dominant or extreme. - Range with latent accumulation: price may still appear sideways, but buyers are quietly more active. 7. Sideways with Sell Pressure - Neutral trend with dominant or extreme sell‑side delta. - Distribution‑like environment where price chops while sellers are gradually more aggressive. Exhaustion & Volume Extremes 8. Exhaustion – Buy Risk - Extreme bullish trend, volume climax and strong buy‑side delta. - Educational idea: very strong up‑move where both participation and delta are already stretched; risk of exhaustion or blow‑off. 9. Exhaustion – Sell Risk - Extreme bearish trend, volume dry‑up and strong sell‑side delta. - Suggests one‑sided selling into increasingly thin liquidity. 10. Volume Climax (Buy) - Neutral trend, neutral delta, but volume at climax levels. - Often associated with a “big event” bar where participation spikes without a clear directional commitment. 11. Volume Climax (Sell / Dry‑Up) - Neutral trend and neutral delta, while the volume vector indicates an extreme dry‑up. - Highlights a stand‑still episode: very limited interest from both sides, increasing the sensitivity to future impulses. Divergences 12. Divergence – Bullish Context - Bullish or extreme bullish trend, but delta has faded back to neutral. - Price trend continues while order‑flow conviction softens; can precede pauses or complex corrections. 13. Divergence – Bearish Context - Bearish or extreme bearish trend with a neutral delta. - Downtrend persists, but selling pressure no longer dominates as clearly. Consolidation & Compression 14. Consolidation - Default state when no specific pattern dominates and the market is broadly balanced. - Educational use: treat this as a “no strong edge” label; focus on structure rather than direction. 15. Breakout Imminent - Neutral trend with contracting volume. - Compression phase where energy is building up; often precedes transitions into trending or shock scenarios. Traps & Hidden Divergences 16. Bull Trap - Bullish trend, with neutral or contracting volume and sell‑side delta. - Price appears strong, but order‑flow shifts against it; often seen near fake breakouts or failing rallies. 17. Bear Trap - Bearish trend, neutral or contracting volume, but buy‑side delta. - Downtrend “looks” intact, while buyers become more aggressive underneath the surface. 18. Hidden Bullish Divergence - Bullish trend, contracting volume, but strong buy‑side delta. - Educational idea: price dips or slows while aggressive buyers step in, often inside an ongoing uptrend. 19. Hidden Bearish Divergence - Bearish trend, volume expansion and strong sell‑side delta. - Reinforced downside pressure even if price is temporarily retracing. Reversal & Transition Patterns 20. Reversal to Bearish - Neutral trend, volume climax and strong sell‑side delta. - Suggests that heavy selling appears at the top of a move, turning a previously neutral or rising context into potential downside. 21. Reversal to Bullish - Neutral trend, extreme volume dry‑up and strong buy‑side delta. - Often associated with selling exhaustion where buyers start to take control. 22. Indecision Spike - Neutral trend with extreme volume (climax or dry‑up) but neutral delta. - Crowd participation changes sharply while order‑flow remains undecided; treat as an informational spike rather than a direction. Extended Compression & Acceleration 23. Coiling Phase - Neutral trend, contracting volume, and delta that is neutral or only mildly one‑sided. - Extended compression where price, volume and delta all contract into a tightly coiled range, often preceding a strong move. 24. Bullish Acceleration - Bullish trend with volume expansion and strong buy‑side delta. - Uptrend not only continues but gains kinetic strength; educationally, this illustrates how trend, volume and delta align in the strongest phases of a move. 25. Bearish Acceleration - Bearish trend with volume expansion and strong sell‑side delta. - Mirror image of Bullish Acceleration on the downside. Trend Exhaustion & Climax Reversal 26. Bull Exhaustion - Bullish or extreme bullish trend, with contraction or dry‑up in volume and buy‑side or neutral delta. - The move has already travelled far; participation fades while price is still elevated. 27. Bear Exhaustion - Bearish or extreme bearish trend, with volume climax or contraction and sell‑side or neutral delta. - Down‑move may be approaching a point where additional selling pressure has diminishing impact. 28. Blow‑Off Top - Extreme bullish trend, volume climax and extreme buy delta all at once. - Classic blow‑off behaviour: price, volume and order‑flow are simultaneously stretched in the same direction. 29. Selling Climax Reversal - Extreme bearish trend with extreme volume dry‑up and extreme sell‑side delta. - Marks a very aggressive capitulation phase that can precede major rebounds. Advanced VSA / Anomaly Scenarios 30. Absorption - Typically neutral trend with expanding or climax volume and extreme delta (either buy or sell). - Educational focus: large participants are aggressively absorbing liquidity from the opposite side, while price remains relatively contained. 31. Distribution - Scenario where volume remains elevated while directional conviction weakens and the trend slows. - Represents potential “selling into strength” or “buying into weakness”, depending on the active side. 32. Liquidity Vacuum - Combination of thin liquidity (extreme dry‑up) with a directional trend or strong delta. - Highlights environments where even small orders can move price disproportionately. 33. Anomaly / Shock Event - Triggered when the vector z‑scores detect rare combinations of price, volume and delta behaviour that deviate from their own historical distribution. - Intended as a warning label for unusual events rather than a specific tradeable pattern. 9. Educational Usage Notes - EMVOL does not produce mechanical “buy” or “sell” commands. Instead, it classes each bar into an interpretable state so that traders can study how trends, volume and order‑flow interact over time. - A common exercise is to overlay your usual EMA crossovers, support/resistance or price patterns and observe which EMVOL scenarios appear around entries, exits, traps and climaxes. - Because the vectors are normalized (bounded between ‑1 and +1) and then discretized, the same conceptual states can be compared across different symbols and timeframes. 10. Disclaimer & Educational Purpose This indicator is provided strictly as an educational and analytical tool. Its purpose is to help visualise how price, volume and order‑flow interact; it is not designed to function as a stand‑alone trading system. Please note: 1. No Automated Strategy – The script does not implement a complete trading strategy. Scenario labels and dashboard messages are descriptive and should not be followed as unconditional entry or exit signals. 2. No Financial Advice – All information produced by this indicator is general market analysis. It must not be interpreted as investment, financial or trading advice, or as a recommendation to buy or sell any instrument. 3. Risk Warning – Trading and investing involve substantial risk, including the risk of loss. Always perform your own analysis, use appropriate position sizing and risk management, and consult a qualified professional if needed. You are solely responsible for any decisions made using this tool. 4. Data Precision & Platform Limits – The “Intrabar (Precise)” mode depends on the availability of high‑resolution historical data at the chosen intrabar timeframe. If your TradingView plan or the symbol’s history does not provide sufficient depth, this mode may only partially cover the visible chart. In such cases, consider switching to “Geometry (Source File)” for a fully populated view.
Penunjuk Pine Script®
oleh ata_sabanci
2
Volume Threshold Levels - Crypto LidyaVolume Threshold Levels – Crypto Lidya Understanding volume behavior is one of the most effective ways to detect trend changes, manipulation candles, aggressive entries, and institutional activity. Volume Threshold Levels (VTL) not only displays raw volume but also calculates dynamic volume thresholds (2x – 3x – 4x) based on the moving average, allowing you to identify statistically meaningful volume anomalies with precision. 📌 1. Volume Columns The indicator plots each bar’s volume using traditional column-style visualization. Green: Bullish candle Red: Bearish candle Gray: Neutral candle This helps traders clearly understand the relationship between price and volume. 📌 2. Average Volume Area VTL offers two types of moving averages for volume: SMA (Simple Moving Average) EMA (Exponential Moving Average) The average volume is drawn as a soft yellow area across the chart. This area acts as the baseline for normal volume levels. 📌 3. Dynamic Threshold Lines (2x / 3x / 4x) The script calculates and displays multipliers of the average volume: 2x Average 3x Average 4x Average These levels appear as bright yellow lines. They are extremely useful for identifying breakouts, traps, and aggressive institutional entries. 📌 4. Volume Spike Detection (Alerts) VTL identifies upward crossovers where volume breaks above key levels: 1x Volume Signal 2x Volume Signal 3x Volume Signal 4x Volume Signal These can be used directly as TradingView alerts. This allows you to automate detection of high-impact volume spikes. 📌 5. Use Cases The indicator performs exceptionally well in: Breakout confirmation Liquidity sweep analysis Detecting manipulation candles Combining with OB, FVG, or other SMC structures Scalping and low-timeframe aggressive volume interpretation Algorithmic filters for volume-based strategies 📌 6. Summary VTL delivers: ✔ Dynamic average volume baseline ✔ Clear 2x–3x–4x volume thresholds ✔ Accurate detection of upside volume explosions ✔ A strong tool for traders who rely on volume confirmation Completely open-source and ready to be extended.
Penunjuk Pine Script®
oleh CryptoLidyaPro
1
Volume essential parameters overlayVolume EPO – Essential Volume Parameters Overlay 1. Motivation and design philosophy Volume EPO is designed as a conceptual overlay rather than a self contained trading system. The main idea behind this script is to take complex, foundational market concepts out of heavy, menu driven strategies and express them as lightweight, independent layers that sit on top of any chart or indicator. In many TradingView scripts, a single strategy tries to handle everything at once: signal logic, risk settings, visual cues, multi timeframe controls, and conceptual explanations. This usually leads to long input menus, performance issues, and difficult maintenance. The architectural approach behind Volume EPO is the opposite: keep the core strategy lean, and move the explanation and measurement of key concepts into dedicated overlays. In this framework, Volume EPO is the base layer for the concept of volume. It does not decide anything about entries or exits. Instead, it exposes and clarifies how different definitions of volume behave candle by candle. Other layers or strategies can then build on top of this understanding. 2. What Volume EPO does Volume EPO focuses on four essential volume parameters for each bar: - Buy volume - Sell volume - Total volume - Delta volume (the difference between buy and sell volume) The script presents these parameters in a compact heads up display (HUD) table that can be positioned anywhere on the chart. It is designed to be visually minimal, language aware, and usable on top of any other indicator or price action without cluttering the view. The indicator does not output signals, alerts, arrows, or strategy entries. It is a descriptive and educational tool that shows how volume is distributed, not a prescriptive tool that tells the trader what to do. 3. Two definitions of volume A central theme of this script is that there is more than one way to define and interpret “volume” inside a single candle. Volume EPO implements and clearly separates two different approaches: - A geometric, candle based approximation that uses only OHLC and volume of the current bar. - An intrabar, data driven definition that uses lower timeframe up and down volume when it is available. The user can switch between these modes via the calculation method input. The mode is prominently shown inside the on chart table so that the context is always explicit. 3.1 Geometry mode (Source File, approximate) In Geometry mode, Volume EPO works only with the current bar’s OHLC values and total volume. No lower timeframe data is required. The candle’s range is defined as high minus low. If the range is positive, the position of the close inside that range is used as a simple model for how volume might have been distributed between buyers and sellers: - The closer the close is to the high, the more of the total volume is attributed to the buying side. - The closer the close is to the low, the more of the total volume is attributed to the selling side. - In a rare case where the bar has no price range (for example a flat or doji bar), total volume is split evenly between buy and sell volume. From this model, the script derives: - Buy volume (approximated) - Sell volume (approximated) - Total volume (as reported by the bar) - Delta volume as the difference between buy and sell volume This approach is intentionally labeled as “Geometry (Approx)” in the HUD. It is a theoretical reconstruction based solely on the candle’s geometry and total volume, and it is always available on any market or timeframe that provides OHLCV data. 3.2 Intrabar mode (Precise) In Intrabar mode, Volume EPO uses the TradingView built in library for up and down volume on a user selected lower timeframe. Instead of inferring volume from the shape of the candle, it reads the underlying lower timeframe data when that data is accessible. The script requests up and down volume from a lower timeframe such as 15 seconds, using the official TA library functions. The results are then interpreted as follows: - Buy volume is taken as the absolute value of the up volume. - Sell volume is taken as the absolute value of the down volume. - Total volume is the sum of buy and sell volume. - Delta volume is provided directly by the library as the difference between up and down volume. If valid lower timeframe data exists for a bar, the bar is counted as covered by Intrabar data. If not, that bar is marked as invalid for this precise calculation and is excluded from the covered count. This mode is labeled “Precise” in the HUD, together with the selected lower timeframe, because it is anchored in actual intrabar data rather than in a geometric model. It provides a closer view of how buying and selling pressure unfolded inside the bar, at the cost of requiring more data and being dependent on the availability of that data. 4. Coverage, lookback, and what the numbers mean The top part of the HUD reports not only which volume definition is active, but also an additional line that describes the effective coverage of the data. In Intrabar (Precise) mode, the script displays: - “Scanned: N Bars” Here, N counts how many bars since the indicator was loaded have successfully received valid lower timeframe delta data. It is a measure of how much of the visible history has been truly covered by intrabar information, not a lookback window in the sense of a rolling calculation. In Geometry mode, the script displays: - “Lookback: L Bars” In this extracted layer, the lookback value L is purely descriptive. It does not change how the current bar’s volume is computed, and it is not used in any iterative or statistical calculation inside this script. It is meant as a conceptual label, for example to keep the volume layer consistent with a broader framework where lookback length is a structural parameter. Summarizing these two fields: - Scanned tells you how many bars have been processed using real intrabar data. - Lookback is a descriptive parameter in Geometry mode in this specific overlay, not a direct driver of the computations. 5. The HUD layout on the chart The on chart table is intentionally compact and structured to be read quickly: - Header: a title identifying the overlay as Volume EPO. - Mode line: explicitly states whether the script is in Precise or Geometry mode, and for Precise mode also shows the lower timeframe used. - Coverage line: - In Precise mode, it shows “Scanned: N Bars”. - In Geometry mode, it shows “Lookback: L Bars”. - Volume block: - A line for buy and sell volume, marked with clear directional symbols. - A line for total volume and the absolute delta, accompanied by the sign of the delta. - Numeric formatting uses human friendly suffixes (for example K, M, B) to keep the display readable. - Footer: the current symbol and a time stamp, adjusted by a user selectable timezone offset so that the HUD can be aligned with the trader’s local time reference. The table can be positioned anywhere on the chart and resized via inputs, and it supports multiple color themes and languages in order to integrate cleanly into different chart layouts. 6. How to use Volume EPO in practice Volume EPO is meant to be read together with price action and other tools, not in isolation. Typical uses include: - Studying how often a strong directional candle is actually supported by dominant buy or sell volume. - Comparing the behavior of delta volume between Geometry and Intrabar definitions. - Building a personal intuition for how intrabar data refines or contradicts the simple candle based approximation. - Feeding these insights into separate, lean strategy scripts that do not need to carry the full explanatory logic of volume inside them. Because it is an overlay layer, Volume EPO can be stacked with other custom indicators without adding new signals or complexity to their logic. It simply adds a clear and consistent view of volume behavior on top of whatever the trader is already watching. 7. Educational and non signalling nature Finally, it is important to stress that Volume EPO is not a trading system, not a signal generator, and not financial advice. The script does not tell the user when to enter or exit. It only reports how different definitions of volume describe the current bar. Deciding whether to trade, how to trade, and which risk parameters to use remains entirely with the user and with their own strategy. Volume EPO provides context and clarity around the concept of volume so that those decisions can be informed by a better understanding of how buying and selling pressure is structured inside each candle. Note: Even on lower timeframes, every reconstruction of volume remains an approximation, except at the true single tick level. However, the closer the chosen lower timeframe is to a one tick stream, the more accurately it can reflect the underlying order flow and balance between buying and selling pressure.
Penunjuk Pine Script®
oleh ata_sabanci
4
Volume Surge AlertVolume is often the fuel behind meaningful price moves. The Volume Surge Alert indicator highlights bars where volume explodes above its recent average, helping you spot accumulation, distribution, and breakout attempts before the price fully reacts. Calculates a configurable simple moving average of volume to establish “normal” activity. Flags bars where the current volume exceeds the SMA by a user-defined multiple (default 2×). Colors the column and background on surge bars for quick visual confirmation. Provides an alert condition so you can receive notifications the moment activity spikes. Use it on any timeframe or market to monitor for unusual participation, confirm breakouts, or filter entries. Adjust the SMA length and surge multiple to match your market’s typical liquidity profile.
Penunjuk Pine Script®
oleh marktan93
POC Volume Bar (Highest Volume in Range)What the highlighted POC bar means 🔶 1. Institutional interest A POC often identifies where big money stepped in. 🔶 2. Support or resistance pivot Large volume often signals: • A reversal • A breakout • Or the beginning of a trend 🔶 3. Liquidity magnet Price tends to revisit high-volume bars. They act like magnets. 🔶 4. Trend confirmation or exhaustion High volume on: • Green candle → bullish participation • Red candle → distribution / aggressive selling
Penunjuk Pine Script®
oleh greatbrownball
VolumeAnlaysis### Volume Analysis (VA) Indicator **Overview** The Volume Analysis (VA) indicator is a dynamic overlay tool designed for traders seeking to identify high-volume breakouts, retests, and multi-timeframe volume-driven price cycles. By combining volume spikes with price action and support/resistance boxes, it highlights potential trend continuations, reversals, and cycle shifts. Ideal for intraday and swing trading on stocks, forex, or crypto, it uses a Fibonacci-inspired 1.618 multiplier to detect significant volume surges, then maps them to visual boxes and key levels for actionable insights. This indicator draws from volume profile concepts but focuses on **breakout confirmation** and **cycle momentum**, helping you spot when "smart money" volume aligns with price extremes. It's particularly useful in volatile markets where volume precedes price moves. **How It Works** 1. **Volume Break Detection**: - Identifies a "Volume Break" when the current bar's volume exceeds 1.618x the highest volume from the prior 5 bars. This signals unusual activity, often preceding breakouts. - A "Volume Retest" triggers exactly 3 bars after a break if volume has been falling steadily over those 3 bars—indicating a pullback for re-accumulation/distribution. 2. **Visual Annotations**: - **Labels**: Green/red/yellow labels mark Volume Breaks and Retests, positioned above/below the bar based on candle direction for clarity. - **Demand/Supply Boxes**: - Blue semi-transparent boxes form around Retest bars, extending rightward to act as dynamic support/resistance. - Green (bullish) or red (bearish) boxes draw from Volume Breaks, based on the original candle's open/close, highlighting potential zones for continuation. - Limited to 5 boxes max to avoid chart clutter; older boxes fade as new ones form. 3. **Box Interaction Signals**: - When price enters a box: - **Reversal Hints**: Maroon (bearish rejection) or lime (bullish rejection) labels on closes against the trend with opening price momentum. - **Breakout Arrows**: Up/down arrows on crossovers/crossunders of box tops/bottoms from Retest boxes. - Scans all active boxes for interactions, prioritizing recent volume events. 4. **Multi-Timeframe Volume Cycles**: - Aggregates the "Volume Break Max" level (a proxy for key price extremes tied to volume spikes) across timeframes: 1min, 5min, 10min, 30min, and 65min (using `request.security`). - Computes **MaxVolBreak** (highest extreme) and **MinVolBreak** (lowest extreme) for trend-following levels. - Tracks **Percent Volume Greater/Less Than Close**: Sums volumes from TFs where price is below/above these levels, creating a momentum ratio. - **CrossClose**: Plots the prior close where this ratio crosses (gray line), signaling cycle shifts—bullish below MinVolBreak, bearish above MaxVolBreak. - **Fills**: Red fill above CrossClose/MaxVolBreak (bearish cycle); green below CrossClose/MinVolBreak (bullish cycle). 5. **Plots**: - Black lines for MaxVolBreak (⏫) and MinVolBreak (⏬). - Gray 🔄 for CrossClose. - Colors dynamically adjust (green/red) based on close relative to levels. **Key Features** - **Trend vs. Reversal Modes**: Toggle alerts for trend-following breaks (crosses of Max/MinVolBreak) or reversal signals (crosses of CrossClose). - **Multi-TF Fusion**: Optionally include the chart's native timeframe in Max/Min calculations for finer tuning. - **Box Management**: Auto-prunes to 5 boxes; focuses on retest/break alignments for "inside bar" logic. - **Momentum Filters**: Uses rising/falling opens and crossovers for label precision, reducing noise. - **Customizable**: Simple inputs for alert visibility and timeframe inclusion. **Settings** | Input | Default | Description | |-------|---------|-------------| | Show Volume Reversal Breaks | False | Enables alerts/labels for CrossClose crosses (cycle reversals). | | Show Trend Following Breaks | True | Enables alerts for Max/MinVolBreak crosses (trend signals). | | Use Current Time | False | Includes chart's native TF in multi-TF Max/Min calculations. | **Alerts** - **Reversal Alerts** (if enabled): "Volume Reverse Bullish/Bearish Break of " on close crosses of CrossClose. - **Trend Alerts** (if enabled): "Trend Volume Bullish/Bearish Signal" on close crosses of Max/MinVolBreak; plus notes if prior low/high aligns with levels. - All alerts include ticker and level value for easy scanning. Use `alert.freq_once_per_bar` to avoid spam. **Trading Ideas** - **Bullish Entry**: Green box formation + price holding MinVolBreak + upward arrow on retest box. Target next resistance. - **Bearish Entry**: Red box + close above MaxVolBreak + red fill activation. Stop below recent low. - **Cycle Trading**: Watch CrossClose crosses for regime shifts—fade extremes in overextended cycles. - **Best Timeframes**: 5-30min for intraday; combine with daily for swings. Works best on liquid assets with reliable volume data. **Limitations & Notes** - Relies on accurate volume data (e.g., stocks/forex); less effective on low-volume or synthetic instruments. - Boxes extend rightward but don't auto-delete—monitor for clutter on long histories (max_bars_back=500). - Some logic (e.g., exact 3-bar retest) is rigid; backtest for your market. - Open-source under MPL 2.0—fork and tweak as needed! For questions or enhancements, drop a comment below. Happy trading! 🚀
Penunjuk Pine Script®
oleh TPolehn
ICT HTF Volume Candles (Based on HTF Candles by Fadi)# ICT HTF Volume Candles - Multi-Timeframe Volume Analysis ## Overview This indicator provides multi-timeframe volume visualization designed to complement price action analysis. It displays volume data from up to 6 higher timeframes simultaneously in a separate panel, allowing traders to identify volume spikes, divergences, and institutional activity without switching between timeframes. **Original Concept Credits:** This indicator builds upon the HTF Candles framework by Fadi, adapting it specifically for volume analysis with enhanced features including gap-filling for extended hours, multiple scaling methods, and advanced synchronization. ## What Makes This Script Original ### Key Innovations: 1. **Three Volume Scaling Methods:** - **Per-HTF Auto Scale:** Each timeframe scales independently for detailed comparison - **Global Auto Scale:** All timeframes use unified scale for relative volume comparison - **Manual Scale:** User-defined maximum for consistent analysis across sessions 2. **Bullish/Bearish Volume Differentiation:** - Volume bars colored based on price movement (close vs open) - Separate styling for bullish (green) and bearish (red) volume periods - Helps identify whether volume supports price direction 3. **Advanced Time Synchronization:** - Custom daily candle open times (Midnight, 8:30 AM, 9:30 AM ET) - Timezone-aware calculations for New York trading hours - Real-time countdown timers for each timeframe - **Gap-filling technology** for continuous display during extended hours and weekends 4. **Flexible Display Options:** - Configurable spacing and positioning - Label placement (top, bottom, or both) - Day-of-week or time interval labels on candles - Works reliably in backtesting and live trading ## How It Works ### Volume Calculation The indicator uses `request.security()` with optimized parameters to fetch volume data from higher timeframes: - **Volume Open/High/Low/Close (OHLC):** Tracks volume changes within each HTF candle - **Color Logic:** Compares HTF close vs open prices to determine bullish/bearish classification - **Alignment:** All volume bars share a common baseline for easy visual comparison - **Gap Handling:** Uses `gaps=barmerge.gaps_off` to maintain continuity during non-trading hours ### Technical Implementation ``` 1. Monitors HTF timeframe changes using request.security() with lookahead 2. Creates new VolumeCandle object when HTF bar opens 3. Updates current candle's volume H/L/C on each chart bar 4. Applies selected scaling method to normalize display height 5. Repositions all candles and labels on each bar update 6. Fills gaps automatically during extended hours for consistent display ``` ### Scaling Methods Explained **Method 1 - Auto Scale per HTF:** Each timeframe displays volume relative to its own maximum. Best for identifying patterns within each individual timeframe. **Method 2 - Global Auto Scale:** All timeframes share the same scale based on the highest volume across all HTFs. Best for comparing relative volume strength between timeframes. **Method 3 - Manual Scale:** User sets maximum volume value. Best for maintaining consistent scale across different trading sessions or instruments. ## How to Use This Indicator ### Setup 1. Add indicator to your chart (it appears in a separate panel below price) 2. Configure up to 6 higher timeframes (default: 5m, 15m, 1H, 4H, 1D, 1W) 3. Set number of candles to display for each timeframe 4. Choose volume scaling method based on your analysis needs 5. Enable "Fix gaps in non-trading hours" for extended hours trading (enabled by default) ### Interpretation **Volume Spikes:** - Sudden increase in volume height indicates institutional activity or strong conviction - Compare volume between timeframes to identify where the real money is moving - Look for volume spikes that appear across multiple timeframes simultaneously **Bullish vs Bearish Volume:** - **Green volume bars:** Price closed higher (buying pressure) - **Red volume bars:** Price closed lower (selling pressure) - High green volume during uptrend = confirmation of strength - High red volume during downtrend = confirmation of weakness - High volume opposite to trend = potential reversal warning **Multi-Timeframe Context:** - **5m/15m:** Scalping and day trading activity - **1H/4H:** Swing trading and intraday institutional flows - **Daily/Weekly:** Major position building and long-term trends **Divergences:** - Price making new highs but volume declining = weakening trend - Volume increasing while price consolidates = potential breakout brewing - Price breaks level but volume doesn't confirm = likely false breakout ### Practical Examples **Example 1 - Institutional Confirmation:** Price breaks above resistance. Check volume across timeframes: - 5m shows spike = retail interest - 15m + 1H + 4H all show spikes = institutional confirmation - **Trade confidence: HIGH** **Example 2 - False Breakout Detection:** Price breaks resistance with: - High volume on 5m only - Normal/low volume on 1H and 4H - **Interpretation:** Likely retail trap, institutions not participating - **Action:** Wait for pullback or avoid **Example 3 - Accumulation Phase:** Price ranges sideways but: - Daily volume gradually increasing - Weekly volume above average - **Interpretation:** Smart money accumulating - **Action:** Prepare for breakout in direction of volume **Example 4 - Volume Divergence:** Price makes new high: - Current high has lower volume than previous high across all timeframes - **Interpretation:** Weakening momentum - **Action:** Consider profit-taking or reversal trade ## Configuration Parameters ### Timeframe Settings - **HTF 1-6:** Select timeframes (must be higher than chart timeframe) - **Max Display:** Number of candles to show per timeframe (1-50) - **Limit to Next HTFs:** Display only first N enabled timeframes (1-6) ### Styling - **Bull/Bear Colors:** Separate colors for body, border, and wick - **Padding from current candles:** Distance offset from live price action - **Space between candles:** Gap between individual volume bars - **Space between Higher Timeframes:** Gap between different timeframe groups - **Candle Width:** Thickness of volume bars (1-4, multiplied by 2) ### Volume Settings - **Volume Scale Method:** Choose 1, 2, or 3 - 1 = Auto Scale per HTF (each TF independent) - 2 = Global Auto Scale (all TF unified) - 3 = Manual Scale (user-defined max) - **Auto Scale Volume:** Enable/disable automatic scaling - **Manual Scale Max Volume:** Set maximum when using Method 3 ### Label Settings - **HTF Label:** Show/hide timeframe names with color and size options - **Label Positions:** Display at Top, Bottom, or Both - **Label Alignment:** Align centered or Follow Candles - **Remaining Time:** Show countdown timer until next HTF candle - **Interval Value:** Display day-of-week or time on each candle ### Custom Daily Candle - **Enable Custom Daily:** Override default daily candle timing - **Open Time Options:** - **Midnight:** Standard 00:00 ET daily open - **8:30 AM:** Align with economic data releases - **9:30 AM:** Align with NYSE market open - Useful for specific trading strategies or market alignment ### Advanced Settings - **Fix gaps in non-trading hours:** Maintains alignment during extended hours and weekends (recommended: ON) - Prevents visual gaps during forex weekend closures - Ensures consistent display during crypto 24/7 trading - Improves backtesting reliability ## Best Practices 1. **Pair with Price Action:** Use alongside HTF price candles indicator for complete picture 2. **Start Simple:** Enable 2-3 timeframes initially (e.g., 15m, 1H, 4H), add more as needed 3. **Match Settings:** Use same candle width/spacing as companion price indicator for visual alignment 4. **Scale Appropriately:** - Use **Global scale** (Method 2) when comparing timeframes - Use **Per-HTF scale** (Method 1) for pattern analysis within each timeframe - Use **Manual scale** (Method 3) for consistent day-to-day comparison 5. **Watch for Volume Clusters:** High volume appearing simultaneously across multiple HTFs signals significant market events 6. **Confirm Breakouts:** Always check if volume supports the price movement across higher timeframes 7. **Extended Hours:** Keep "Fix gaps" enabled for 24/7 markets (Forex, Crypto) and weekend analysis ## Technical Notes - **Timezone:** All calculations use America/New_York timezone for consistency - **Real-time Updates:** Volume and timers update on each tick during market hours - **Performance:** Optimized with max_bars_back=5000 for extensive historical analysis - **Compatibility:** Works on all instruments with volume data (Stocks, Forex, Crypto, Futures) - **Gap Handling:** Uses `barmerge.gaps_off` to fill data gaps during non-trading periods - **Backtesting:** Uses `lookahead=barmerge.lookahead_on` for stable historical data without repainting - **Data Continuity:** Automatically handles market closures, weekends, and extended hours ## Updates & Improvements **Version 2.0 (Current):** - ✅ Fixed alignment issues during extended hours and weekends - ✅ Eliminated repainting in backtesting - ✅ Added gap-filling technology for continuous display - ✅ Improved data synchronization across all timeframes - ✅ Enhanced NA value handling for data integrity - ✅ Added advanced settings group for user control ## Support For questions, suggestions, or feedback, please comment on the publication or message the author. --- **Disclaimer:** This indicator is for educational and informational purposes only. It does not constitute financial advice. Past performance is not indicative of future results. Always perform your own analysis and implement proper risk management before making trading decisions.
Penunjuk Pine Script®
oleh Pitt4
VOLUME Full [Titans_Invest]VOLUME Full Designed for traders who want to take volume analysis to the next level. This version delivers deeper insight into volume activity, integrating multiple customizable filters to highlight key buying and selling pressure. It's a comprehensive solution for volume-based decision-making. ⯁ WHAT IS THE VOLUME❓ The Volume indicator is a fundamental technical analysis tool that measures the number of shares or contracts traded in a security or market during a given period. It helps traders and investors understand the strength or weakness of a price movement, confirm trends, and predict potential reversals. Volume is typically displayed as a histogram below a price chart, with each bar representing the volume traded during a specific time interval. ⯁ HOW TO USE THE VOLUME❓ The Volume indicator can be used in several ways to enhance trading decisions: • Trend Confirmation: High volume during a price move confirms the strength of that trend, while low volume can indicate a weak or unsustainable trend. • Breakouts: A price breakout from a pattern or range accompanied by high volume is more likely to be valid and sustainable. • Divergence: When the price moves in one direction and volume moves in the opposite direction, it can signal a potential reversal. • Overbought/Oversold Conditions: Extreme volume levels can sometimes indicate that an asset is overbought or oversold, though this is less straightforward than with oscillators like the RSI. ⯁ ENTRY CONDITIONS The conditions below are fully flexible and allow for complete customization of the signal. ______________________________________________________ 🔹 CONDITIONS TO BUY 📈 ______________________________________________________  ▪︎   Signal Validity: The signal will remain valid for X bars .  ▪︎   Signal Sequence: Configurable as AND or OR . 🔹 volume Positive 🔹 volume Negative 🔹 volume > volume 🔹 volume < volume 🔹 volume > volume_MA 🔹 volume > volume_MA * Trigger Signal (close > open) 🔹 volume > volume_MA * Trigger Signal (Keep State P) 🔹 volume > volume_MA * Trigger Signal (close < open) 🔹 volume > volume_MA * Trigger Signal (Keep State N) ______________________________________________________ ______________________________________________________ 🔸 CONDITIONS TO SELL 📉 ______________________________________________________  ▪︎   Signal Validity: The signal will remain valid for X bars .  ▪︎   Signal Sequence: Configurable as AND or OR . 🔸 volume Positive 🔸 volume Negative 🔸 volume > volume 🔸 volume < volume 🔸 volume > volume_MA 🔸 volume > volume_MA * Trigger Signal (close > open) 🔸 volume > volume_MA * Trigger Signal (Keep State P) 🔸 volume > volume_MA * Trigger Signal (close < open) 🔸 volume > volume_MA * Trigger Signal (Keep State N) ______________________________________________________ ______________________________________________________ 🤖 AUTOMATION 🤖 • You can automate the BUY and SELL signals of this indicator. ______________________________________________________ ______________________________________________________ ⯁ UNIQUE FEATURES ______________________________________________________ Signal Validity: The signal will remain valid for X bars Signal Sequence: Configurable as AND/OR Condition Table: BUY/SELL Condition Labels: BUY/SELL Plot Labels in the Graph Above: BUY/SELL Displays Positive & Negative Volume. Automate and Monitor Signals/Alerts: BUY/SELL Signal Validity: The signal will remain valid for X bars Signal Sequence: Configurable as AND/OR Table of Conditions: BUY/SELL Conditions Label: BUY/SELL Plot Labels in the graph above: BUY/SELL Displays Positive & Negative Volume. Automate & Monitor Signals/Alerts: BUY/SELL ______________________________________________________ 📜 SCRIPT : VOLUME Full 🎴 Art by  : @Titans_Invest & @DiFlip 👨‍💻 Dev by : @Titans_Invest & @DiFlip 🎑 Titans Invest — The Wizards Without Gloves 🧤 ✨ Enjoy! ______________________________________________________ o Mission 🗺 • Inspire Traders to manifest Magic in the Market. o Vision 𐓏 • To elevate collective Energy 𐓷𐓏
Penunjuk Pine Script®
oleh Titans_Invest
Trading Activity Index (Zeiierman)█ Overview Trading Activity Index (Zeiierman) is a volume-based market activity meter that transforms dollar-volume into a smooth, normalized “activity index.” It highlights when market participation is unusually low or high with a dynamic color gradient: Light Blue → Low Activity (thin participation, low liquidity conditions) Red/Orange → High Activity (active markets, large trades flowing in) Additional percentile bands (20/40/60/80%) give context, helping you see whether the current activity level is in the bottom quintile, mid-range, or near historical extremes. █ How It Works ⚪ Dollar Volume Transformation Each bar, dollar volume is computed: float dlrVol = close * volume float dlrVolAvg = ta.sma(dlrVol, len_form) Dollar volume = price × volume, smoothed by a configurable SMA window. The result is log-transformed, compressing large outliers for a more stable signal. ⚪ Rolling Percentiles & Ranking The log-dollar-volume series is compared to its rolling history (len_hist bars): float p20 = ta.percentile_linear_interpolation(vscale, len_hist, 20) float p40 = ta.percentile_linear_interpolation(vscale, len_hist, 40) float p60 = ta.percentile_linear_interpolation(vscale, len_hist, 60) float p80 = ta.percentile_linear_interpolation(vscale, len_hist, 80) A normalized rank (0–1) is produced to color the main Trading Activity line. █ How to Use ⚪ Detect High-Impact Sessions Quickly see if today’s session is active or quiet relative to its own history — great for filtering setups that need activity. ⚪ Spot Breakouts & Traps Combine with price action: High activity near breakouts = strong follow-through likely. Low activity breakouts = vulnerable to fake-outs. ⚪ Market Regime Context Percentile bands help you assess whether participation is building up, in the middle of the range, or drying out — valuable for timing mean-reversion trades. Above 80th percentile (red/orange) → Market is highly active, breakout trades and trend strategies are favored. Below 20th percentile (light blue) → Market is quiet; fade moves or wait for expansion. Watch transitions from blue → orange as a signal of growing institutional participation. █ Settings Formation Window (bars) – Number of bars used to average dollar volume before log transform. History Window (bars) – Lookback period for percentile calculations and rank normalization. ----------------- Disclaimer The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
Penunjuk Pine Script®
oleh Zeiierman
8
Volume Stress Level V2Volume Stress Level V2, is designed to provide a nuanced view of "RECENT" trading volume by identifying different levels of volume stress relative to a smoothed average. Key Features: Dynamic Volume Stress Calculation: The indicator calculates volume stress based on a Simple Moving Average (SMA) of volume and its standard deviation. The length of the SMA and the multiplier for the standard deviation are fully customizable, allowing you to adapt the indicator to different market conditions and trading styles. Visual Volume Zones: The script visually categorizes volume into distinct zones: Low Volume Zone: Represented by a white background, indicating periods of lower-than-average trading activity. Normal Volume Zone: Highlighted in blue, signifying typical trading volume. Medium Volume Zone: Displayed in yellow, denoting a moderate increase in volume. High Volume Zone: Shown in orange, indicating significant volume spikes. Spike Volume Zone: Marked in black, representing extreme volume events. Customizable Background: You have the option to enable or disable the colored background fill for these volume zones, providing flexibility in how you visualize the data. Bar Coloring: The volume bars themselves are color-coded according to the identified volume stress level, offering an immediate visual cue on your chart. Adjustable Parameters: VSL Length: Controls the lookback period for the SMA and standard deviation calculations. Multiplier: Adjusts the sensitivity of the standard deviation bands, thereby influencing the width of the volume zones. How to Use: This indicator can be valuable for identifying potential shifts in market sentiment, confirming breakouts, or spotting periods of accumulation and distribution. By observing the transitions between volume zones, traders can gain insights into the conviction behind price movements.
Penunjuk Pine Script®
oleh TaylorTAL
Volumetric Compressed MAVCMA (Volumetric Compressed Moving Average) uses the compressor and weighted standard deviation functions originally translated to pinescript by @gorx1 to plot moving averages in order to use for entry confirmation. 🔹 Concepts and Idea: When we do music we always use different kinds of filters (low-pass, high pass, etc) for equalization and filtering itself. That stuff we use in finance as well. What we also always use in music are compressors, there dynamic processors that automatically adjust volume so it will be more consistent. Almost all the cool music you hear is compressed (both individual instruments (especially vocals) and the whole track afterwards), otherwise stuff will be too quite and too weak to flex on it, and also DJing it would be a nightmare. 🔹 Model: I don't wanna explain it all in statistical / DSP way for once. First of all, I think the population of volumes is log-normally distributed, so let's take logs of volumes, now we have a ~ normally distributed data. We take linearly weighted mean, add and subtract linearly weighted standard deviation from it, these would be our thresholds, the borders between different kinds of volumes explained before. The upper threshold is for downward compression, that will not let volume pass it higher. The lower threshold is for upward compression, all the volumes lower than this threshold will be brought up to the threshold's level. Then we apply multipliers to the thresholds in order to adjust em and find the sweet spots. We do it the same way as in sound engineering when we don't aim for overcompression, we adjust the thresholds until they start to touch the signal and all good. Afterwards, we delete all the number 1 and number 3 volume, leaving us exclusively with the clear main component, ready to be processed further. We return the volumes to dem real scale. For more info on Volume Compression it's highly advised to check @gorx1's initial script Volume Compressor 🔹 Settings: MA Type: Moving average type to be used for comparison after calculating the compressed version of volume. This creates the second line after the compression line, so we can consider crossovers for confirmation entries. Upward threshold: Upward threshold where the compression of volume is calculated. Increasing usually causes smoother lines. Downward threshold: Downward threshold where the compression of volume is calculated. Decreasing usually causes smoother lines. Compression Lookback: The Main lookback window of a volume that is used for compression. Increasing this would provide smoother lines but might cause delayed signals. Decreasing means more signals, but might cause whiplash and distorted signals. Comparative Lookback: This is our lookback to be used with our ma type selection. There is no static better or worse lookback value for this indicator. It should be adjusted based on the pair. 🔹 Where to use: This indicator should be used as another confirmation tool for your entry signals in your existing strategy/market following combination. Green dots (crossovers) mean bullish movement is expected, and red dots (crossbounders) mean bearish movement is expected. Automated crossover alerts are available. A reminder is that this kind of indicator should not be used on its own for trading, but rather should be used as a confirmation along with your trend detection and main entry indicators to provide additional confidence. If you want to know under the hood, read the How it works section below. 🔹 How it works: //This is our main compression calculation, which is used for the first line. Compressed_out = compressor(volume, len_window, up_thresh, down_thresh) //This is the secondary ratio calculation that we use for the second line. Comp_ma = ma(ma_type, close * compressed_out, len_ml) / ma(ma_type, compressed_out, len_ml) Vwma = ma(ma_type, close, len_window) We calculate the ratio of the compressed volume and plot it against the base MA. Base MA's length is determined by the Compression Lookback input compared to the Comperative Lookback that is used for the compressed version. This provides us with another possible confirmation indicator that can be used to take advantage of volume ranges.
Penunjuk Pine Script®
oleh serkany88
Volume by Time [LuxAlgo]The Volume by Time indicator collects volume data for every point in time over the day and displays the average volume of the specific dataset collected at each respective bar. The indicator overlays the current volume and the historical average to allow for better comparisons. 🔶 USAGE Throughout the day, the volume of every bar is stored in groups organized by the time when each bar occurred. Over time, the datasets accumulate, and from that, we can simply determine the average value at each specific time of the day. The display is a histogram style, which consists of hollow bars and solid filled columns. -Hollow bars represent the average volume at that time of the day. -Solid columns display the current volume from the current bar. By default, the entire history of data is used, but if desired, the number of days under analysis can be specified to provide a more relevant point of view. A readout of the number of days being analyzed can be seen in the status bar at any time. Note: Due to partial sessions, it is typical to see this value change throughout the day; this is simply due to the fact that not every trading session has the exact same schedule 100% of the time. The analysis type can also be specified; these can be either Average (Default) or Median. Additionally, a Bi-directional can be toggled for a distinct difference between upwards volume and downwards volume. 🔶 SETTINGS Analysis Type: Choose between Average or Median analysis modes. Length (Days): Set the number of days to use for analysis. Set to 0 for full data (Default 0). Bi-Directional Toggle: Toggle between one-sided or two-sided display.
Penunjuk Pine Script®
oleh LuxAlgo
7
Moving Average Volume (20, 50)Shows two moving averages of volume, the 20 and 50 periods. white bars in the background show volume, look for breaks of the target lines to confirm a breakout with volume green shaded regions show how much higher the current volume is compared to historical volume the greener the shade, the higher the multiple is (cap is 10x higher) indicator is to be used with other breakout identifiers, or to help confirm the strength of a move out of an SAR level.
Penunjuk Pine Script®
oleh cota16
VOLUME Simple [Titans_Invest]VOLUME Simple A streamlined volume analysis tool crafted for simplicity and smart signal detection. Although simple in appearance, this indicator brings intelligent volume-based entries through configurable logic. Its design emphasizes clean and effective interpretation of volume signals. ⯁ WHAT IS THE VOLUME INDICATOR❓ The Volume indicator is a fundamental technical analysis tool that measures the number of shares or contracts traded in a security or market during a given period. It helps traders and investors understand the strength or weakness of a price movement, confirm trends, and predict potential reversals. Volume is typically displayed as a histogram below a price chart, with each bar representing the volume traded during a specific time interval. ⯁ HOW TO USE THE VOLUME❓ The Volume indicator can be used in several ways to enhance trading decisions: • Trend Confirmation: High volume during a price move confirms the strength of that trend, while low volume can indicate a weak or unsustainable trend. • Breakouts: A price breakout from a pattern or range accompanied by high volume is more likely to be valid and sustainable. • Divergence: When the price moves in one direction and volume moves in the opposite direction, it can signal a potential reversal. • Overbought/Oversold Conditions: Extreme volume levels can sometimes indicate that an asset is overbought or oversold, though this is less straightforward than with oscillators like the RSI. ⯁ ENTRY CONDITIONS The conditions below are fully flexible and allow for complete customization of the signal. ______________________________________________________ 🔹 CONDITIONS TO BUY 📈 ______________________________________________________  ▪︎   Signal Validity: The signal will remain valid for X bars . 🔹 volume > volume_MA * Trigger Signal (close > open) 🔹 volume > volume_MA * Trigger Signal (Keep State) ______________________________________________________ ______________________________________________________ 🔸 CONDITIONS TO SELL 📉 ______________________________________________________  ▪︎   Signal Validity: The signal will remain valid for X bars . 🔸 volume > volume_MA * Trigger Signal (close > open) 🔸 volume > volume_MA * Trigger Signal (Keep State) ______________________________________________________ ______________________________________________________ 🤖 AUTOMATION 🤖 • You can automate the BUY and SELL signals of this indicator. ______________________________________________________ ______________________________________________________ ⯁ UNIQUE FEATURES ______________________________________________________ Signal Validity: The signal will remain valid for X bars Condition Table: BUY/SELL Condition Labels: BUY/SELL Plot Labels in the Graph Above: BUY/SELL Automate and Monitor Signals/Alerts: BUY/SELL Signal Validity: The signal will remain valid for X bars Table of Conditions: BUY/SELL Conditions Label: BUY/SELL Plot Labels in the graph above: BUY/SELL Automate & Monitor Signals/Alerts: BUY/SELL ______________________________________________________ 📜 SCRIPT : VOLUME Simple 🎴 Art by  : @Titans_Invest & @DiFlip 👨‍💻 Dev by : @Titans_Invest & @DiFlip 🎑 Titans Invest — The Wizards Without Gloves 🧤 ✨ Enjoy! ______________________________________________________ o Mission 🗺 • Inspire Traders to manifest Magic in the Market. o Vision 𐓏 • To elevate collective Energy 𐓷𐓏
Penunjuk Pine Script®
oleh Titans_Invest