Optimist Pulse Wave [RC]
Optimist Pulse Wave
Optimist Pulse Wave is a closed-source oscillator that analyzes market momentum and internal price energy using a structured multi-wave and multi-filter framework. The indicator is intended to help traders assess momentum strength, phase transitions, and potential exhaustion areas across different market conditions.
Data Sources and Technical Components
The script is derived from price OHLC data and internally incorporates commonly known technical elements, including:
Simple Moving Averages (SMA)
Exponential Moving Averages (EMA)
Relative Strength Index (RSI)
Moving Average Convergence Divergence (MACD)
and used proprietary algorithm to make price and volume data to waves
These elements are not used or displayed in their standard standalone form. They are combined, transformed, and normalized to construct a layered momentum model.
Conceptual Framework
Market momentum develops in layers and degrees of strength. Rather than producing a single oscillator output, this indicator decomposes momentum into multiple wave types, and then evaluates each wave through progressive strength filters.
Wave Types
The script models momentum using five wave types, each representing a different time-response of price:
1. Pulse Wave | Short-term momentum and rapid price acceleration
2. Swing Wave | Intermediate momentum capturing swing-level movements
3. Trend Wave | Broader directional momentum reflecting trend persistence
4. Cycle Wave | Dominant rhythm of price over extended periods
5. Epoch Wave | Long-duration structural momentum used to contextualize regime changes or
prolonged conditions
Strength Filters
Each wave type is further evaluated using five internal strength filters, representing increasing levels of momentum confirmation:
Base | Minimal momentum conditions for the wave
Enhanced | Improved momentum quality with reduced noise
Strong | Sustained momentum with higher consistency
Dominant | Momentum aligned across multiple internal measures
Absolute | Extreme or fully developed momentum state
These filters help distinguish weak signals from structurally strong conditions.
Normalization and Zones
All wave and filter outputs are normalized to a fixed 0–100 scale, allowing comparison across symbols and timeframes.
The oscillator is visually divided into:
Green / Lower Zone : (Low Energy / Accumulation) Weak or rebuilding momentum
Middle Zone : Transitional or balanced conditions
Red / Upper Zone : (High Energy / Distribution / Exhaustion)Strong momentum or potential exhaustion
Zone interpretation is context-dependent.
Visual Trade Signals
✔ Green markers → Pulse-based BUY zones (energy expansion from lows)
✔ Red markers → Pulse-based SELL zones (energy exhaustion from highs)
Visual Markers
Visual markers appear when specific wave-and-filter combinations indicate:
Momentum expansion from low-strength conditions
Momentum deterioration after extended strength
Markers are intended as analytical references, not automated trade instructions.
🌍 Works Across All Markets & Timeframes
✔ Index (NIFTY, BANKNIFTY)
✔ Stocks
✔ Forex
✔ Crypto
✔ Scalping, Intraday to Positional
Usage Guidelines
This indicator may assist traders in:
Evaluating trend quality and momentum health
Timing entries during pullbacks
Identifying momentum exhaustion
Avoiding low-energy or sideways conditions
It should be used in conjunction with price action and contextual analysis.
Important Notes
The script uses commonly known technical components in a non-standard, composite structure
No predictive certainty or profitability claims are made
All outputs require user interpretation and confirmation
Settings and Training Videos available in followed folder
drive.google.com
Analisis Gelombang
M15 Impulse FVG EntryM15 Impulse FVG Entry
M15 Impulse FVG Entry is a minimalist price-action tool designed to highlight structured entry contexts using impulse candles, decision zones, and Fair Value Gap (FVG) logic.
⸻
Core Logic
1. M15 Impulse Candle
A strong M15 candle is identified using ATR expansion and body-to-range ratio.
This candle defines a decision zone (High / Low).
2. IN Candle
Only the first candle that forms fully inside the decision zone after the M15 impulse is considered.
This candle acts as the structural reference.
3. OUT Candle
Price must break cleanly outside the zone.
The previous candle must already close outside the zone.
No reversal is allowed through the IN candle extreme.
4. FVG Entry Context
The gap between the IN candle and the OUT candle forms the Fair Value Gap.
A midpoint between IN and OUT can be used as a potential entry reference.
⸻
What This Script Shows
• M15 — Impulse candle marker
• Zone — High / Low of the impulse candle
• IN — First valid candle inside the zone
• OUT — Valid breakout candle
⸻
Design Philosophy
• No BUY / SELL bias
• No alerts, no automation
• No indicator stacking
• Clean and chart-friendly
This script provides market context and structure only .
Risk management and execution rules remain the trader’s responsibility.
WaveTrend MACD Fusion Oscillator [MatrixQuantLabs]WaveTrend MACD Fusion Oscillator is a composite momentum oscillator that combines WaveTrend trend structure with MACD momentum analysis in a unified panel.
It is designed to help traders better align trend strength, wave timing, and signal confirmation through normalization, filtering, and divergence analysis.
Core Concept
Instead of using the original WaveTrend histogram structure, this indicator adopts the standard MACD histogram as its momentum foundation.
This design choice allows for clearer and more reliable differentiation of trend strength, while maintaining consistency across different symbols and timeframes through normalization.
WaveTrend is then applied as a wave timing and signal layer, making the overall structure easier to interpret and more robust in varying market conditions.
Key Features
Normalized MACD for Cross-Market Consistency
• The indicator uses standard MACD parameters (12/26/9) and applies normalization to scale values into a consistent range.
• This helps avoid chart distortion across different symbols and timeframes.
• An optional “Hide Weekly+” mode is provided to prevent higher-timeframe MACD values from compressing the panel scale.
MACD Histogram with Optional MACD Lines
• The MACD histogram visually represents bullish and bearish momentum, with dynamic coloring to reflect momentum expansion or contraction.
• MACD and Signal lines can be optionally displayed when deeper analysis is required.
Divergence Detection (Regular & Hidden)
Built-in divergence detection supports both MACD lines and histogram-based divergences, with selectable modes:
• Regular Divergence for potential reversals
• Hidden Divergence for trend continuation
Pivot-based confirmation and range filters help reduce noise and false signals.
WaveTrend Oscillator with Cross Strength Classification
• The WaveTrend module consists of a main trend line and a signal line, highlighting wave structure and momentum shifts.
• Golden crosses and death crosses are classified into multiple strength levels, allowing users to distinguish minor signals from more significant ones.
• The closer a counter-directional cross occurs to the overbought or oversold zones, the stronger the potential reversal signal.
• Optional Laguerre smoothing can be enabled to reduce noise and improve signal stability.
MACD-Based Signal Filtering
WaveTrend cross signals can be filtered using MACD conditions:
• Histogram Filter: Bullish crosses only when the MACD histogram is bullish, bearish crosses only when bearish
• Zero-Line Filter: Bullish crosses only above the MACD zero line, bearish crosses only below
These filters help align wave signals with the broader momentum context and reduce counter-trend noise.
Parameter Notes
Normalization Period
• Adjust this value if the indicator appears compressed or if different symbols show inconsistent scaling.
Pivot Right
• Higher values provide stronger confirmation with more delay; lower values are more sensitive and respond faster.
Laguerre Smoothing (Gamma)
• Lower values offer stronger smoothing and stability; higher values provide faster but noisier responses.
Usage Notes
• Use WaveTrend crosses to identify wave timing and momentum shifts.
• Use MACD (histogram and zero line) to assess trend direction and momentum strength.
• Divergence signals should be treated as early warnings, not standalone trade triggers.
• Best results are achieved when combined with trend analysis, price structure, or higher-timeframe context.
Disclaimer
This indicator is intended for educational and analytical purposes only and does not constitute financial advice. Always apply proper risk management and confirm signals with additional analysis.
Mongoose Capital: Oil Regime + Geo Risk IntegrationMongoose Capital — Oil Regime + Geo Risk Integration
Overview
Oil Regime + Geo Risk Integration is a macro-aware regime classification framework designed to contextualize crude oil price action through curve structure, volatility state, demand pressure, trend alignment, and macro tightness.
Rather than forecasting price, this indicator answers a more important question for energy traders:
“What type of oil market are we currently trading in?”
The output is a clear regime state with an execution playbook, allowing traders to adapt tactics to conditions instead of forcing the same strategy across incompatible environments.
What This Indicator Does
This script classifies the oil market into distinct regimes by evaluating:
Curve structure (tight vs loose)
Volatility state (expanding vs suppressed)
Demand strength
Trend direction
Macro tightness or ease
Geopolitical / risk sensitivity layer
Each bar resolves into a single regime, paired with:
A readable regime label
A background state
A recommended execution posture
Regime Framework (Conceptual)
The regime engine resolves into one of the following high-level environments:
Risk-Off / Defensive
Weak demand
Loose curve
Downtrend
Macro stress present
→ Favor defense, mean reversion, or standing aside
Volatility Expansion / Event Risk
Elevated volatility
Tightening structure
→ Favor tactical trades, reduced size, wider stops
Trend Expansion / Supply-Driven
Strong demand
Tight curve
Trend confirmation
→ Favor continuation, breakouts, directional exposure
Neutral / Transitional
Mixed signals
Low alignment
→ Patience required, confirmation preferred
Alignment Confidence
The indicator also computes an alignment score, reflecting how many core components agree:
Curve
Volatility
Demand
Macro state
Higher alignment implies greater regime confidence. Lower alignment signals transition risk and elevated false moves.
How to Use
Apply the indicator to WTI / CL or related oil instruments.
Identify the current regime label and background state.
Adjust execution behavior accordingly:
Strategy selection
Position sizing
Holding period
Risk tolerance
This tool is most effective when paired with:
Structure-based trading
Order flow tools
Execution overlays (such as the WTI Execution Overlay)
What This Indicator Is
A market context engine
A regime classification system
A macro-aware execution guide
What This Indicator Is Not
Not a buy/sell signal
Not predictive
Not a standalone trading system
Intended Audience
Energy and futures traders
Macro-focused discretionary traders
Traders who adapt strategy based on regime rather than fixed rules
This script assumes the user already understands basic market structure and risk management.
Credits
Developed by Mongoose Labs, the research arm of Mongoose Capital, focused on:
Regime-based market structure
Macro-integrated execution logic
Institutional-style trading frameworks
Provided strictly for educational and analytical use.
Disclaimer
This indicator does not constitute financial advice. Trading futures and leveraged instruments involves substantial risk. Past regime explanations do not guarantee future outcomes. Use at your own discretion.
Internal note (not for publishing):
This pairs perfectly with:
WTI Execution Overlay
Oil Volatility Compression Monitor
Energy Macro Dashboard
LUCEO StructureTitle: LUCEO Structure Scanner (PA & ICT/SMC All-in-One)
The LUCEO Structure Scanner is an all-in-one toolkit designed for Price Action and ICT/SMC traders. It helps you instantly visualize the Market Structure and Liquidity flow without cluttering your chart. Whether you are a scalper or a swing trader, this indicator simplifies the analysis of price movements, allowing you to focus on high-probability setups.
Automated Market Structure Mapping:
Automatically identifies Swing Highs and Lows labels (HH, HL, LH, LL) based on the Zigzag algorithm.
Detects and marks BOS (Break of Structure) for trend continuation and CHoCH (Change of Character) for trend reversals.
Liquidity Sweep Detection:
Identifies "Sweeps" (Stop Hunts/Wick Grabs) where price breaks a swing point but closes back within the range.
Crucial for avoiding fake-outs and finding reversal entries.
FVG (Fair Value Gaps):
Visualizes bullish and bearish Imbalances (FVG) boxes.
Useful for identifying potential support/resistance zones or price magnets.
Zigzag Deviation (%): Adjust this value to filter market noise.
0.1% - 0.5%: Recommended for Scalping (1m - 5m).
0.5% - 1.5%: Recommended for Intraday (15m - 1H).
> 2.0%: Recommended for Swing Trading (4H+).
Candle Filter: Enable to only count swings that align with candle color logic for stricter structure mapping.
This tool is for educational and analytical purposes only. Always manage your risk.
LUCEO Structure Scanner (PA & ICT/SMC All-in-One)
LUCEO Structure Scanner는 트레이딩의 본질인 '시장 구조(Market Structure)'와 '유동성(Liquidity)' 흐름을 직관적으로 파악할 수 있도록 설계된 올인원 지표입니다. 복잡한 보조지표 없이 가격의 움직임(Price Action) 그 자체에 집중하는 트레이더를 위해 개발되었습니다. 스캘핑부터 스윙 트레이딩까지 모든 타임프레임에서 시장의 맥락을 읽는 데 도움을 줍니다.
시장 구조 자동 식별 (Market Structure):
Zigzag 알고리즘을 기반으로 HH, HL, LH, LL을 자동으로 라벨링합니다.
추세 지속(BOS)과 추세 전환(CHoCH) 구간을 자동으로 표시하여 현재 시장의 방향성을 명확히 보여줍니다.
정교한 스윕 감지 (Liquidity Sweep):
단순한 돌파가 아닌, 꼬리로 고점/저점 유동성만 가져가고 종가는 회귀하는 Sweep(휩소/스탑 헌팅) 패턴을 감지합니다.
함정 카드(Fake-out)를 피하고 진입 타점을 잡는 데 유용합니다.
FVG (Fair Value Gap):
시장 불균형이 발생한 구간(Imbalance)을 박스로 시각화합니다.
지지/저항 테스트 구간으로 활용할 수 있습니다.
Zigzag 임계값 (%)
1분~5분봉 스캘핑: 0.1% ~ 0.5% 추천
15분~1시간봉 데이: 0.5% ~ 1.5% 추천
4시간봉 이상 스윙: 2.0% 이상 추천
타임프레임과 종목의 변동성에 맞춰 수치를 조정하면 노이즈를 효과적으로 제거할 수 있습니다.
Trend Rider mybullandbearOverview
Rite Trend Rider is a trend-following overlay indicator designed specifically for option sellers. It combines trend strength filtering with a dynamic trailing line to generate non-repainting signals for selling calls (bearish trend) or puts (bullish trend) in strong trending conditions.
The indicator plots a colored trend line (green for uptrend, red for downtrend) and displays clear entry labels only when trend strength is confirmed.
Key Features
Dynamic trend line that trails price action
ADX-based filtering for strong trends only
Built-in cooldown to avoid frequent signals in choppy markets
Visual labels: "Sell Put" (blue upward label) for bullish trend entries, "Sell Call" (red downward label) for bearish trend entries
Customizable inputs for fine-tuning
How to Use
Add the indicator to any chart (works best on intraday to daily timeframes for indices/stocks with options).
Wait for a "Sell Put" label → Indicates strong bullish trend: Consider selling out-of-the-money Put options (theta decay strategy).
Wait for a "Sell Call" label → Indicates strong bearish trend: Consider selling out-of-the-money Call options (theta decay strategy).
Signals appear only in confirmed strong trends and respect a cooldown period (default 5 bars) to reduce noise.
The trend line color confirms overall direction: Green = Bullish bias, Red = Bearish bias.
Inputs
Multiplier: Adjusts sensitivity of the trailing calculation (default: 1.0).
Common Period: Base period for calculations (default: 14).
ADX Threshold: Minimum trend strength required for signals (default: 25).
Signal Cooldown (bars): Minimum bars between signals (default: 5).
Show Entry Signals?: Toggle labels on/off.
Change calculation (no volume data)?: Alternative mode if volume/MFI is unavailable.
Note
This is for educational purposes only and not financial advice. Always manage risk, use appropriate position sizing, and combine with your own analysis. Best used in trending markets; avoid during low-volatility/range-bound periods.
EMA 4EMA Ribbon — Base + 4×HTF Overlays is a classic 8-line EMA ribbon with advanced multi-timeframe overlays. It plots the ribbon on the current chart timeframe and can additionally overlay up to four higher-timeframe (HTF) EMA ribbons at the same time—perfect for reading HTF structure while trading on a lower timeframe.
Key Features
Base EMA Ribbon (Current TF):
Standard 8-EMA ribbon using customizable periods (MA-1…MA-8) and a “Drop first N candles” option (legacy v3 behavior).
4× HTF Ribbon Overlays:
Enable up to four separate HTF ribbons, each with:
a dedicated ON/OFF toggle
selectable timeframe
optional Smooth mode (updates inside the HTF candle)
Offset Toggle for Base Ribbon (Comparison Mode):
Move the base ribbon vertically to compare structure without hiding price.
Offset modes: Percent (%) or ATR-based
Useful for visual separation, testing alignment, and quick “context vs. execution” comparisons.
Notes
Smooth mode can repaint inside the HTF candle (because it uses lookahead to appear “continuous”). Turn it off if you want only confirmed HTF values.
Context Pro SuiteContext Pro Suite
**VWAP • EMA Cloud • Session High/Low (NY / London / Asia)
The Context Pro Suite is a *decision-making overlay*, not a signal spam indicator.
It’s designed to help traders clearly see **value, trend, and liquidity levels** across **New York, London, and Asia sessions** — all in one clean, customizable tool.
Built for **NQ, ES, Gold, and FX pairs**, with a focus on **5–15-minute execution charts**.
---
## 🔹 What This Indicator Shows
### ✅ VWAP + ATR Bands
* Session VWAP (fair value)
* ATR-based extension bands (1x / 2x)
* Helps identify **overextension, mean reversion zones, and trend pullbacks**
### ✅ EMA 9 / 21 Cloud
* Visual trend and momentum filter
* Custom colors + opacity
* Identifies **trend continuation vs chop**
### ✅ Session High / Low Levels
* **New York RTH**
* **London**
* **Asia (midnight-safe)**
* Optional previous session highs/lows
* Adjustable line styles, widths, colors, and extensions
### ✅ Anchored VWAP (Optional)
* Reset by:
* Daily
* NY session start
* London session start
* Asia session start
* Useful for tracking **session-specific value shifts**
---
## 🔹 How Traders Use It
This indicator is meant to answer:
* *Are we trading at value or extension?*
* *Is the market trending or rotating?*
* *Where is liquidity likely sitting right now?*
Common use cases:
* Trend pullbacks into VWAP or EMA cloud
* Reversal setups at session highs/lows
* Session breakout + retest confirmation
* Overnight context for London and Asia sessions
---
## 🔹 Customization & Flexibility
Every component can be toggled and styled:
* Colors, widths, line styles
* Cloud up/down colors + opacity
* Session visibility and extensions
* VWAP band multipliers and ATR length
Members can adapt it to **their own style**, market, and timeframe.
The system visually blocks entries when the signal candle is too large relative to ATR, helping traders avoid statistically unfavorable risk-to-reward scenarios.
🔑 Key Notes:
The ❌ is an ENTRY filter only
It does not signal exits or reversals
It does not invalidate trend or structure
It simply prevents late participation
If a valid entry already occurred, the ❌ should be ignored and trade management continues as planned.
This is intended to improve discipline, consistency, and execution quality, especially during high-volatility environments.
Disclaimer:
As always, this indicator is a context and decision-support tool, not financial advice. Users should apply proper risk management and confirm signals with their own trading plan.
Smart Signals [Vdubus]Smart Signals
Concept & Philosophy
Smart Signals is a "Regime-Filtered" oscillator designed to solve the biggest problem with standard indicators: Counter-trend noise.
Most oscillators (like Stochastic or RSI) are "dumb" to market context—they will signal "Sell" continuously during a strong uptrend simply because the price is high. Smart Signals fixes this by first determining the Market Regime (Bullish or Bearish) and then strictly filtering out any signal that contradicts that trend.
It creates a "Tiered" trading system that separates standard trend-following entries from high-probability "Sniper" entries (Hidden Divergence), all presented in a clean, color-blind-friendly visual interface.
Core Functions
1. The "Sheriff" (Trend Filter)
At the heart of the indicator is a heavy, modified Hull Moving Average (HMA 200) that acts as the trend baseline.
Bullish Regime: When the baseline is sloping UP, the indicator enters "Buy Only" mode. All Sell signals are mathematically deleted.
Bearish Regime: When the baseline is sloping DOWN, the indicator enters "Sell Only" mode. All Buy signals are mathematically deleted.
The Math: It uses a custom difference-weighted formula (wmaHalf = Length / 1) to create a stable, chop-resistant trend anchor.
2. Dual-Signal Engine
The indicator scans for two distinct types of entries simultaneously:
♦ Standard Signals (Blue/Red Diamonds):
Logic: A classic Stochastic pullback (Cross 20/80) aligned with the trend.
Use Case: These are frequent "Bread and Butter" trend entries. They are excellent for scaling into a position or adding to a winner as the trend continues.
Location: Plotted at the top (Sell) and bottom (Buy) edges of the panel.
+ Sniper Signals (Gold Crosses):
Logic: Hidden Divergence. The script detects when Price holds structure (Higher Low) while Momentum resets (Lower Low). This is a "Slingshot" setup.
Use Case: These are rare, high-conviction entries. They often mark the end of a complex correction and the resumption of the main trend.
Location: Plotted on the Zero Line to indicate structural strength.
3. Smart Momentum Histogram
The histogram visualizes the "Energy" of the move (MACD 21, 34, 7), but with a twist. It is color-coded to the signal priority:
Gold Bars: A Sniper (Divergence) setup is active.
Solid Blue/Red Bars: A Standard Signal is active.
Faded Blue/Red Bars: The trend is active, but momentum is resetting (waiting mode).
Gray Bars: Counter-trend noise (Ignore).
How to Trade It
Check the "Road": Look at the general color of the histogram columns.
Blue Columns: Look for Longs.
Red Columns: Look for Shorts.
The "Sniper" Entry: Wait for a Gold Cross (+) on the zero line. This is your primary signal to enter a trade with normal risk.
The "Pyramid" Entry: If the trend continues and you see Blue/Red Diamonds (♦) appear at the edges, these are safe places to add to your position.
The Exit: Since this is a trend-following tool, exit when the histogram color flips (e.g., from Blue to Red/Gray), or use your own support/resistance targets.
Alerts Configuration
The indicator comes with a full suite of alerts for automation:
Gold Buy / Gold Sell: Notifies you only for the high-probability Hidden Divergence setups.
Standard Buy / Standard Sell: Notifies you for every trend pullback.
ANY BUY / ANY SELL: A combo alert that triggers on either signal type (useful for simplifying your alert limits).
Accessibility
Color Blind Friendly: The default palette uses High-Contrast Blue (#2962FF) and Soft Red (#FF5252) instead of standard Green/Red, ensuring visibility for all users.
Zero Clutter: No text labels or confusing lines. Just clear, distinct shapes (Diamonds and Crosses) at fixed locations.
Chainbey Ai - Liquidity Zones (Pivot Sweeps) - Chain Style📌 Indicator Description
Chainbey Ai – Liquidity Zones (Pivot Sweeps) – Chain Style
This indicator automatically identifies and visualizes liquidity zones on the chart based on confirmed swing highs and lows, helping traders spot areas where stop-loss clusters, institutional interest, and liquidity grabs are likely to occur.
Unlike simple pivot markers, this script draws true liquidity zones (price areas, not single lines) and tracks when price sweeps those zones — a common behavior before strong reversals or continuations.
The indicator is designed to stay stable when switching pairs or timeframes, using time-anchored zones for reliable positioning across all markets.
🔍 Key Features
Buy-Side Liquidity Zones
Marked above swing highs (potential stop-loss pools)
Sell-Side Liquidity Zones
Marked below swing lows
Liquidity Sweep Detection
Highlights when price grabs liquidity using wick or close
Zone Strength Filters
ATR-based swing size filtering
Optional volume confirmation
Cooldown logic to reduce clutter
Time-Anchored Zones
Zones remain aligned when switching symbols or timeframes
Highly Customizable
Control pivot strength, zone size, filters, and visibility
Works on All Markets
Crypto, Forex, Indices, Commodities, Stocks
🧠 How to Use
Trend Continuation
Look for price to sweep liquidity and continue in trend direction
Reversal Setup
Liquidity sweep + rejection can signal potential reversals
Confluence Tool
Combine with trend, RSI, MACD, structure, or volume analysis
Risk Management
Liquidity zones can act as logical SL/TP reference areas
⚠️ This is a market structure & liquidity tool, not a buy/sell signal generator.
Always use confirmation before entering trades.
⚙️ Recommended Settings (BTC 30m)
Pivot Length: 9–12
Min Swing Size (ATR): 1.5 – 2.5
Cooldown Bars: 30 – 50
Max Active Zones: 15 – 20
Volume Filter: Optional (1.2 – 1.4x)
Evil's Two Legged IndicatorA pullback strategy indicator designed for scalping. This attempts to Identify classic 2-leg pullback patterns and filters out signals during choppy market conditions for better signals.
How It Works:
The indicator detects when price forms two pullback legs (swing lows in an uptrend or swing highs in a downtrend) near key support/resistance zones, then signals when reversal confirmation occurs. Equal-level pullbacks (double bottoms/tops) are marked as stronger signals.
Features:
Channel Options: Donchian (default), Linear Regression, or ATR Bands
Configurable EMA: For trend confirmation (default 21)
Adjustable Leg Detection: Swing lookback period for different timeframes
Equal Level Detection: Highlights stronger setups where both legs terminate at similar prices
Three Chop Filters (can be combined):
ADX Filter — suppresses signals when ADX is below threshold (default 25)
EMA Slope Filter — suppresses signals when EMA is flat
Chop Index Filter — suppresses signals when Chop Index indicates ranging conditions
Signal Types:
Standard signals: 2-leg pullback detected with trend confirmation
Strong signals (highlighted): 2-leg pullback with equal highs/lows — higher probability setup
Recommended Use:
Best suited for scalping on 1-5 minute chart. Designed for 1.5:1 risk/reward setups.
Settings Guide:
Increase "Swing Lookback" for fewer, higher-quality signals
Adjust "Equal Level Threshold" to fine-tune what counts as a double bottom/top
Enable/disable chop filters based on your market and timeframe
Use "Show Strong Signals Only" to filter for highest conviction setups
&BAMM&
This indicator shows a break of the peak and a pullback if the trend was upward and the path changed to downward, along with an indication of the targets, and the opposite in a downward trend.
mehja,atops and bottoms
This indicator shows a break of the peak and a pullback if the trend was upward and the path changed to downward, along with an indication of the targets, and the opposite in a downward trend.
NHadou-solo# NHadou-solo — Candle-based Wave Structure Indicator
NHadou-solo is a wave-structure visualization indicator that draws swing lines based on
candle-by-candle price behavior. Unlike typical ZigZag-style indicators that rely on a fixed
percentage threshold to determine swing points, NHadou-solo uses a unique algorithm that
evaluates the relationship between consecutive candles to identify trend continuation and
reversal.
This approach produces wave structures that differ from ZigZag logic and provides a more
granular view of how price swings evolve in real time.
---
## ■ Core Logic (Conceptual Overview)
### ● Unique Algorithm (Different from ZigZag)
- Instead of using percentage-based price deviation, the indicator directly compares the
highs and lows of consecutive candles to determine swing direction.
### ● Candle-by-Candle Reversal Detection
- During an up wave: the wave continues until a candle prints a lower low than the previous low.
- During a down wave: the wave continues until a candle prints a higher high than the previous high.
### ● Handling Inside Bars (Harami)
- When price forms an inside bar, the direction is not confirmed.
- The indicator waits for a breakout before drawing the next segment, reducing noise.
### ● Provisional (Unconfirmed) Wave Lines
- When a potential reversal or a break of a key high/low occurs, a provisional line is drawn.
- This helps visualize possible turning points before they are fully confirmed.
---
## ■ How to Use
- The wave lines represent the current swing direction and potential reversal zones.
- Provisional lines indicate early signs of momentum change.
- Useful for identifying trend continuation, reversals, and swing structure in both trending
and ranging markets.
---
## ■ Notes
- This indicator is provided for educational purposes only and does not constitute financial advice.
----------
NHadou-solo は、ローソク足ごとの価格構造をもとに波動線を描画する、独自ロジックの波動可視化インジケータです。
一般的な ZigZag 系インジケータは、一定の価格変動率 を基準に転換点を描画しますが、
NHadou-solo はローソク足の前後関係を直接比較して波動転換を判定するため、
ZigZag とは異なるアルゴリズムで波動構造を抽出します。
---
## ■ ロジック概要（概念レベル）
### ● ZigZag とは異なる独自アルゴリズム
- 価格変動率ではなく、ローソク足の高値・安値の更新状況を直接比較して判定します。
### ● ローソク足ごとの転換点判定
- 上昇中：安値が前回安値を下回るまで上昇波を継続
- 下降中：高値が前回高値を上回るまで下降波を継続
### ● 含み足・はらみ足の処理
- 方向が確定するまで波を描画せず、ノイズを抑えた波動構造を形成します。
### ● 未確定足（仮線）
- 反転の可能性がある場面や主要高値・安値のブレイク時には仮線を描画し、
波動の“候補”を視覚的に把握できるようにしています。
---
## ■ 使い方
- 波動線は現在の方向性と転換候補を視覚化します。
- 仮線は「反転の可能性」を示すため、確定波との違いを見ながら判断します。
- トレンドの継続・転換、押し目・戻り目の把握に活用できます。
---
## ■ 注意事項
- 本インジケータは教育目的で提供されており、特定の売買を推奨するものではありません。
deKoder | Structural Flow [SF]deKoder | SF | Structural Flow - Swing/Pivot Structure Charting
Strips away the noise of standard candlestick charts and reveals the true underlying swing structure through clean, connected pivot lines.
Beneath the storm of wicks / Silent structure whispers truth
Extreme Noise Reduction
Replaces cluttered price action with a minimalist pivot based line chart. The user-defined Window length lets you control sensitivity: shorter for more detail on lower timeframes, longer for cleaner structure on higher timeframes.
Accurate Swing Detection
Only stronger pivots are accepted. Weaker same side pivots are ignored, preserving the true extreme highs and lows without distortion.
Real Time Extension
The final incomplete leg dynamically follows the current close until the next confirmed pivot forms.
Optional Directional Colouring
Enable Directional Colouring to automatically colour confirmed legs with the user defined bull and bear colours on upward and downward swings.
Adjustable Background Candles
Candles with adjustable transparency may be displayed on the chart. Adjust the visibility setting to find the perfect balance between full raw candle data and clean structure
Practical Uses
Instantly reveals classic chart patterns — head & shoulders, double tops/bottoms, triangles, flags with unmistakable clarity
Becomes simple to spot Wyckoff springs, upthrusts, and phase transitions inside trading ranges
Provides a clean foundation for manual Elliott Wave counting . Clear swing structure makes labeling impulses and corrections much easier
Makes trend changes and potential reversals stand out without second-guessing every wick
Excellent for higher-timeframe structural analysis — the longer window setting produces exceptionally clean swing views
Ideal for creating clean educational screenshots and annotated posts - the chart speaks for itself
Reduces emotional noise by shifting focus from every candle to meaningful swing structure
Well suited for swing and price action traders, Wyckoff and Elliott Wave analysis, and anyone who prefers calm, uncluttered charts over constant visual chaos.
Clean charts. Clear sight.
☠ FR33FA11 | deKoder ☠
Released January 2025 | Open Source
If this open-source script (or any of its free companions) has saved you time or helped you read the market better, a coffee or a few sats helps to keep the Pine coming ❤️
Solana: 2N8HWPAHSC7Z8SLyneMrZp234UAP9HCtQX7wNXw7LKQC
Ethereum: 0xE770D254DC579d1db7bA2fe74376b7009527356B
Bitcoin: bc1qd8j3awht5yrjtnvt5dagxldzhaesc83sftype3
Polygon: 0xE770D254DC579d1db7bA2fe74376b7009527356B
Hype: 0xE770D254DC579d1db7bA2fe74376b7009527356B
abderrahman Swing Signals This private indicator combines swing signals, overlays, trend tracing, and reversal zones.
It is an invite-only script and accessible only to authorized users.
LiveFinTech Indicator🚀 LiveFinTech Indicator – Precision Trend Trading System
Welcome to the LiveFinTech Indicator an institutional grade trading suite designed for precision trend identification and advanced risk management. Whether you are scalping Gold (XAUUSD), trading Indices (NIFTY/BANKNIFTY) Forex or Crypto this tool provides a clear, data driven edge.
💎 Key Professional Features:
✅ Non-Repainting Core
Signals are confirmed only after the candle closes. Once a +Smart Buy or +Smart Sell appears, it is fixed on the chart forever. No lagging, no disappearing signals.
✅ Multi Timeframe Trend Dashboard
Monitor the trend direction across all major timeframes (1m, 5m, 15m, 1H, 1D) simultaneously. Stay on the right side of the market without switching tabs.
✅ Dynamic Position Tracking Table
A built-in professional table at the bottom right that tracks your most recent trades, showing:
Entry Price
Closed Price (Target Hit Price)
Live Trade Status (Active, TP1 Hit, TP2 Hit, ALL TP Hits or SL Hit)
✅ Advanced Risk Management (Independent Targets)
Set your Stop Loss and Take Profit targets (TP1, TP2, TP3) using independent multipliers. Adjusting your Stop Loss won't affect your Profit targets, allowing for complete strategy customization.
✅ Institutional Visuals
Features a custom Trend Ribbon and Background Cloud logic to filter out market noise and identify high-probability entries.
✅ Smart Alert System
Get instant notifications on your mobile app or email for:
Confirmed Entry Signals
Target (TP) Reach notifications
Stop Loss (SL) triggers
📈 How to Use:
Timeframes: Optimized for 1-minute, 5-minute and 15-minute charts for intraday trading.
Alerts: Set alerts using the "Any alert() function call" condition for real-time updates.
🔒 Access & Security:
This is a Private Invite-Only script. The core logic is protected and obfuscated to ensure the highest level of intellectual property security.
For Access: Please contact us with your TradingView username.
Disclaimer: LiveFinTech Indicator is for educational and informational purposes only. Trading involves risk. Past performance does not guarantee future results. Please trade responsibly.
Price Action Strategy Screener 1&5 Min [TradingFinder]🔵 Introduction
Price action is the study of how price moves, reacts, and leaves information behind through structure, swings, and liquidity behavior. Instead of relying on indicator signals or mathematical outputs, price action focuses on reading market intent directly from price movement, especially around key swing highs and lows where liquidity is often targeted. Understanding repeated reactions, failed continuations, and stop hunts is essential for identifying high quality trading opportunities.
In this price action strategy, signals are not generated from a single breakout or liquidity grab. Price must sweep a swing level multiple times, form a new structural reference, and return again to hunt liquidity. This repeated sweep and reaction process filters out random volatility and highlights deliberate market behavior. When this sequence occurs near the upper band or lower band of a price band, the signal gains additional context by aligning with premium and discount zones.
Correlation plays a critical role in validating price action signals. Symbol pairs are first selected based on historically high correlation on the daily timeframe so that divergence becomes meaningful. When correlation weakens on the execution timeframe, situations emerge where one asset continues to make higher highs or lower lows while the correlated asset fails to confirm and remains near a key swing level. This correlation breakdown exposes inter market divergence and relative strength or weakness, reinforcing the price action narrative.
An RSI component is provided only as an optional confirmation tool. It does not participate in signal generation and does not influence the strategy logic. Traders may use RSI to evaluate momentum exhaustion divergence or overbought and oversold conditions, or ignore it entirely. The foundation of this approach remains price action driven, built on liquidity sweeps, structural interaction, correlation dynamics, and contextual price band positioning rather than indicator dependency.
⚠️ Note: This product works only on the 1m and 5m timeframes. Please switch your chart to one of these timeframes to use the indicator properly.
🔵 How to Use
A central pillar of this methodology is the emphasis on historically high correlation as a prerequisite for meaningful analysis. Correlation is not treated as a signal by itself, but as a contextual foundation that gives weight to divergence and disagreement. When two markets have demonstrated strong alignment over time, especially on higher timeframes such as the daily chart, any deviation from that relationship becomes informative. The strategy assumes that without prior correlation, divergence has little analytical value and may simply reflect unrelated market behavior.
By filtering symbol pairs based on strong long term correlation, the tool focuses only on situations where market alignment is expected. When that alignment weakens on the execution timeframe, price behavior gains additional significance. One symbol may continue to expand, break structure, or print new extremes, while the correlated symbol stalls, compresses, or fails to confirm. This breakdown highlights emerging relative strength or weakness and often precedes rotation, rebalancing, or corrective price action rather than clean continuation.
The practical application of this concept relies on selecting logically related markets. Examples include precious metals such as OANDA:XAUUSD and OANDA:XAGUSD , closely linked equity indices like CAPITALCOM:US100 and CAPITALCOM:US500 , highly correlated currency pairs within the same economic group such as OANDA:EURUSD and OANDA:GBPUSD , or crypto assets like COINBASE:BTCUSD and COINBASE:ETHUSD that often move in tandem. By anchoring analysis to these correlated pairs, the strategy avoids random comparisons and instead isolates moments where market disagreement reflects a genuine shift in participation, intent, or liquidity distribution.
🟣 Buy Setup
Buy scenarios are evaluated when price is positioned near the lower band and begins to show signs of downside fatigue. The market should demonstrate repeated probing below a reference low without sustained follow through, indicating sell side absorption. After several failed attempts to push lower, price often compresses, forms a reaction base, and starts to defend that area.
Confirmation comes from relative performance between correlated markets. While the primary symbol holds its ground, the secondary symbol may begin to stabilize or recover, showing that downside pressure is no longer synchronized. This decoupling suggests that bearish participation is weakening. Buy setups gain higher quality when price starts to rotate upward from the lower band while downside extensions continue to fail.
🟣 Sell Setup
Sell scenarios develop when price trades near the upper band and shows signs of upside exhaustion. Multiple extensions above a reference high followed by weak continuation often signal buy side consumption. Price may repeatedly spike higher but struggle to maintain acceptance, leaving behind rejection and compression near the same zone.
Cross market behavior plays a key role in validation. When one correlated asset continues to advance while the primary symbol fails to sustain new highs, the imbalance becomes visible. This lack of confirmation reflects diminishing demand and distribution rather than healthy expansion. Sell setups become higher probability when price stalls near the upper band, fails to hold premium levels, and correlated markets no longer move in alignment.
🔵 Setting
Signal Source Pair : This option defines which pair’s signals are displayed on the chart. The script calculates signals for six different symbol pairs simultaneously, but only one pair can be visualized on the chart at a time. By selecting Pair 1 through Pair 6, the user chooses which pair’s signal output is shown on the active symbol. For example, if Pair 4 is selected, only signals generated by Pair 4 will appear on the chart.
Table on Chart : This setting enables or disables the on chart screener table. When enabled, the table displays signal status, correlation information, and symbol data directly on the chart. When disabled, the chart remains clean with no table overlay.
Number of Symbols : This option controls how many symbol pairs are displayed in the screener table. Users can choose between four or six pairs depending on screen size and personal preference.
Table Size: This setting adjusts the visual scale of the screener table. Smaller sizes are suitable for minimal layouts, while larger sizes improve readability when monitoring multiple pairs simultaneously.
Table Mode : This setting offers two layout styles for the signal table.
Basic mode displays symbols in a single vertical column, using more vertical space and providing straightforward readability.
Extended mode arranges symbols in pairs side by side, optimizing screen space with a more compact and efficient layout.
Table Position : This option defines where the screener table is placed on the chart. The table can be positioned in any corner or central area to avoid overlapping with price action or other indicators.
Symbol 1 and Symbol 2 : These options define the two symbols that are evaluated together as a pair. Users should select symbols that have historically shown high correlation so that divergence and correlation breakdowns carry meaningful analytical value.
Signals are generated based on relative strength and weakness, behavioral divergence, and confirmation failure between the two symbols. For each pair, signals are displayed only for the symbol defined as the active output in the screener.
Confirmation Period : This setting controls the initial swing confirmation window. It defines how many bars are required for a swing structure to be considered valid before liquidity sweeps and reactions are evaluated. Higher values tend to produce stronger and more reliable swing structures while reducing signal frequency. Lower values respond faster but may include shorter term or less significant movements. This logic is applied identically across all six pairs, with each pair calculated independently.
RSI Setting : The RSI section is completely optional and is provided only for visual confirmation. It has no influence on signal generation or strategy logic.
Short RSI, Mid RSI, Long RSI : These options allow different RSI lengths to be displayed simultaneously. Short RSI reacts quickly to momentum changes, while Mid and Long RSI provide smoother and broader context. Each RSI length can be enabled or disabled independently.
Show RSI Levels : This option toggles the visibility of RSI reference levels.
Low Potential Zone : Highlights areas where momentum potential is relatively low.
Mid Potential Zone : Marks neutral or transitional momentum environments.
High Potential Zone : Highlights areas with higher momentum potential, often associated with expansion or exhaustion phases.
All RSI zones are purely visual and do not affect signal logic or calculations.
🔵 Conclusion
This price action strategy is built to highlight moments where market behavior shifts from participation to hesitation. By observing repeated tests of key areas, failed continuation, and loss of alignment between related markets, the approach helps traders focus on areas where risk becomes more defined and directional follow through becomes more selective. The combination of band location, multi stage interaction, and cross market confirmation allows users to filter noise and concentrate on scenarios where price is more likely reacting than accelerating.
Rather than offering fixed entries or automated decisions, this framework encourages discretion, contextual reading, and structured execution. It is most effective when used by traders who understand market phases, rotation, and imbalance, and who are willing to wait for price to reveal intent through behavior rather than speed. When applied with patience and proper risk management, the strategy provides a consistent way to evaluate quality over quantity in evolving market conditions.
Skrip berbayar
Trade with TreandThink of this script as a filter and a signal light for trading Gold. It helps you avoid trading in the wrong direction and tells you exactly when the price momentum is shifting.
The Three Main Parts
The Ultimate Trend (The Filter):
This is the big table in the top-right corner.
Bullish (Green): Only look for BUY signals.
Bearish (Red): Only look for SELL signals.
It uses a "300 SMA" (a long-term average) to make sure you aren't "swimming against the tide."
The Entry Signals (The Crossover):
The script watches two lines on your chart (a 20-period and a 10-period).
When they cross, it places a BUY or SELL label on your screen.
The 4 Alerts (The Notifications):
You don't have to stare at the screen all day.
You get a notification for Buy entries, Sell entries, or when the Main Trend flips from Bullish to Bearish (or vice versa).
Simple Rules for Trading
To be successful with this script, follow these four rules:
Rule 1: Check the Table. If it says "Bearish," ignore all "BUY" labels.
Rule 2: Wait for the Label. Only enter a trade when a "BUY" or "SELL" label appears and it matches the trend table.
Rule 3: Protect Your Money. Look at the last 5 candles. Put your Stop Loss just past the highest or lowest point of those candles.
Rule 4: Aim for the Target. Your profit target should be at least double the amount of money you are risking (Risk:Reward 1:2).
How to use the Settings
When you click the Settings icon on the script, you can change:
SMA Filter: Change the "300" if you want the trend to be faster or slower.
Trend Gap: Adjust how far the trailing line stays away from the price.
Swings P1 / P2 / P3Swing detection via ta.pivothigh/ta.pivotlow (len/len), so labels appear after pivot confirmation (len bars). P2 = swing high, P3 = swing low, P1 marks the prior pivot at trend transition (HH/HL → up, LL/LH → down). Optional ATR minimum leg-length filter.
ATR Reversal Wick ZigZag, Swing P2-P3 LabelsThis indicator plots a wick-based ZigZag where swing points are confirmed by a minimum counter-move (ATR multiple) and a minimum number of bars between swings. Confirmed swing highs are labeled P2, swing lows P3. Optional IDs, labels, and a trend-colored ZigZag line.
Wick-based ZigZag (High/Low wicks)
Swing confirmation via ATR reversal threshold + minimum bars between swings
Labels: P2 = confirmed swing high, P3 = confirmed swing low (optional IDs)
Optional ZigZag line colored by simple HH/HL vs LL/LH trend state
Note: potential swings can move until confirmed
Renko Brick Close Alert (Flexible TF)this indicator helps u to apply custom alert on renko chart and is flexible to any timeframe
Cyber Pips Wave & Momentum SuiteCyber Pips Wave & Momentum Suite is an oscillator-based analysis indicator that combines WaveTrend-style momentum with divergence highlighting and additional momentum context.
It includes:
• Oscillator lines with customizable overbought/oversold zones
• Optional cross-based markers for momentum shifts
• Regular and hidden divergence detection (with optional strength filtering)
• Trend and volume confirmation filters to reduce low-quality signals
• Informational momentum labels for context
Notes:
• Outputs can update on the currently forming candle.
• Any display offsets (if enabled) affect visualization only and do not predict future bars.
This script is provided for charting and educational purposes only. It does not provide financial advice or performance guarantees.
