LogLibrary "Log"
- Log methods that return input value for code readbility and cleaness.
method str(input)
str
Namespace types: series float, simple float, input float, const float
Parameters:
input (float)
method str(input)
str
Namespace types: series int, simple int, input int, const int
Parameters:
input (int)
method str(input)
str
Namespace types: series bool, simple bool, input bool, const bool
Parameters:
input (bool)
method str(input)
str
Namespace types: series string, simple string, input string, const string
Parameters:
input (string)
method str(input)
str
Namespace types: series linefill
Parameters:
input (linefill)
method str(input)
str
Namespace types: series line
Parameters:
input (line)
method str(input)
str
Namespace types: series box
Parameters:
input (box)
method str(input)
str
Namespace types: series label
Parameters:
input (label)
method str(input)
str
Namespace types: chart.point
Parameters:
input (chart.point)
method str(input)
str
Namespace types: array
Parameters:
input (array)
method str(input)
str
Namespace types: array
Parameters:
input (array)
method str(input)
str
Namespace types: array
Parameters:
input (array)
method str(input)
str
Namespace types: array
Parameters:
input (array)
method str(input)
str
Namespace types: array
Parameters:
input (array)
method str(input)
str
Namespace types: array
Parameters:
input (array)
method str(input)
str
Namespace types: array
Parameters:
input (array)
method str(input)
str
Namespace types: array
Parameters:
input (array)
method str(input)
str
Namespace types: array
Parameters:
input (array)
method str(input)
str
Namespace types: matrix
Parameters:
input (matrix)
method str(input)
str
Namespace types: matrix
Parameters:
input (matrix)
method str(input)
str
Namespace types: matrix
Parameters:
input (matrix)
method str(input)
str
Namespace types: matrix
Parameters:
input (matrix)
method str(input)
str
Namespace types: matrix
Parameters:
input (matrix)
method str(input)
str
Namespace types: matrix
Parameters:
input (matrix)
method str(input)
str
Namespace types: matrix
Parameters:
input (matrix)
method str(input)
str
Namespace types: matrix
Parameters:
input (matrix)
method str(input)
Namespace types: matrix
Parameters:
input (matrix)
method info(input, msg)
Logs the input value with the 'info' log level.
Namespace types: chart.point
Parameters:
input (chart.point) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method info(input, msg)
Logs the input value with the 'info' log level.
Namespace types: series float, simple float, input float, const float
Parameters:
input (float) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method info(input, msg)
Logs the input value with the 'info' log level.
Namespace types: series int, simple int, input int, const int
Parameters:
input (int) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method info(input, msg)
Logs the input value with the 'info' log level.
Namespace types: series bool, simple bool, input bool, const bool
Parameters:
input (bool) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method info(input, msg)
Logs the input value with the 'info' log level.
Namespace types: series string, simple string, input string, const string
Parameters:
input (string) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method info(input, msg)
Logs the input value with the 'info' log level.
Namespace types: series linefill
Parameters:
input (linefill) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method info(input, msg)
Logs the input value with the 'info' log level.
Namespace types: series line
Parameters:
input (line) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method info(input, msg)
Logs the input value with the 'info' log level.
Namespace types: series box
Parameters:
input (box) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method info(input, msg)
Logs the input array with the 'info' log level.
Namespace types: series label
Parameters:
input (label) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method info(input, msg)
Logs the input array with the 'info' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method info(input, msg)
Logs the input array with the 'info' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method info(input, msg)
Logs the input array with the 'info' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method info(input, msg)
Logs the input array with the 'info' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method info(input, msg)
Logs the input array with the 'info' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method info(input, msg)
Logs the input array with the 'info' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method info(input, msg)
Logs the input array with the 'info' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method info(input, msg)
Logs the input array with the 'info' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method info(input, msg)
Logs the input matrix with the 'info' log level.
Namespace types: array
Parameters:
input (array) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method info(input, msg)
Logs the input matrix with the 'info' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method info(input, msg)
Logs the input matrix with the 'info' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method info(input, msg)
Logs the input matrix with the 'info' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method info(input, msg)
Logs the input matrix with the 'info' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method info(input, msg)
Logs the input matrix with the 'info' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method info(input, msg)
Logs the input matrix with the 'info' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method info(input, msg)
Logs the input matrix with the 'info' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method info(input, msg)
Logs the input matrix with the 'info' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method info(input, msg)
Namespace types: matrix
Parameters:
input (matrix)
msg (string)
method warn(input, msg)
Logs the input value with the 'warning' log level.
Namespace types: chart.point
Parameters:
input (chart.point) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method warn(input, msg)
Logs the input value with the 'warning' log level.
Namespace types: series float, simple float, input float, const float
Parameters:
input (float) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method warn(input, msg)
Logs the input value with the 'warning' log level.
Namespace types: series int, simple int, input int, const int
Parameters:
input (int) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method warn(input, msg)
Logs the input value with the 'warning' log level.
Namespace types: series bool, simple bool, input bool, const bool
Parameters:
input (bool) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method warn(input, msg)
Logs the input value with the 'warning' log level.
Namespace types: series string, simple string, input string, const string
Parameters:
input (string) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method warn(input, msg)
Logs the input value with the 'warning' log level.
Namespace types: series linefill
Parameters:
input (linefill) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method warn(input, msg)
Logs the input value with the 'warning' log level.
Namespace types: series line
Parameters:
input (line) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method warn(input, msg)
Logs the input value with the 'warning' log level.
Namespace types: series box
Parameters:
input (box) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method warn(input, msg)
Logs the input array with the 'warning' log level.
Namespace types: series label
Parameters:
input (label) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method warn(input, msg)
Logs the input array with the 'warning' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method warn(input, msg)
Logs the input array with the 'warning' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method warn(input, msg)
Logs the input array with the 'warning' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method warn(input, msg)
Logs the input array with the 'warning' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method warn(input, msg)
Logs the input array with the 'warning' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method warn(input, msg)
Logs the input array with the 'warning' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method warn(input, msg)
Logs the input array with the 'warning' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method warn(input, msg)
Logs the input array with the 'warning' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method warn(input, msg)
Logs the input matrix with the 'warning' log level.
Namespace types: array
Parameters:
input (array) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method warn(input, msg)
Logs the input matrix with the 'warning' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method warn(input, msg)
Logs the input matrix with the 'warning' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method warn(input, msg)
Logs the input matrix with the 'warning' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method warn(input, msg)
Logs the input matrix with the 'warning' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method warn(input, msg)
Logs the input matrix with the 'warning' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method warn(input, msg)
Logs the input matrix with the 'warning' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method warn(input, msg)
Logs the input matrix with the 'warning' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method warn(input, msg)
Logs the input matrix with the 'warning' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method warn(input, msg)
Namespace types: matrix
Parameters:
input (matrix)
msg (string)
method error(input, msg)
Logs the input value with the 'error' log level.
Namespace types: chart.point
Parameters:
input (chart.point) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method error(input, msg)
Logs the input value with the 'error' log level.
Namespace types: series float, simple float, input float, const float
Parameters:
input (float) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method error(input, msg)
Logs the input value with the 'error' log level.
Namespace types: series int, simple int, input int, const int
Parameters:
input (int) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method error(input, msg)
Logs the input value with the 'error' log level.
Namespace types: series bool, simple bool, input bool, const bool
Parameters:
input (bool) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method error(input, msg)
Logs the input value with the 'error' log level.
Namespace types: series string, simple string, input string, const string
Parameters:
input (string) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method error(input, msg)
Logs the input value with the 'error' log level.
Namespace types: series linefill
Parameters:
input (linefill) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method error(input, msg)
Logs the input value with the 'error' log level.
Namespace types: series line
Parameters:
input (line) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method error(input, msg)
Logs the input value with the 'error' log level.
Namespace types: series box
Parameters:
input (box) : The input value to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input value.
method error(input, msg)
Logs the input array with the 'error' log level.
Namespace types: series label
Parameters:
input (label) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method error(input, msg)
Logs the input array with the 'error' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method error(input, msg)
Logs the input array with the 'error' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method error(input, msg)
Logs the input array with the 'error' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method error(input, msg)
Logs the input array with the 'error' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method error(input, msg)
Logs the input array with the 'error' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method error(input, msg)
Logs the input array with the 'error' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method error(input, msg)
Logs the input array with the 'error' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method error(input, msg)
Logs the input array with the 'error' log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input array.
method error(input, msg)
Logs the input matrix with the 'error' log level.
Namespace types: array
Parameters:
input (array) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method error(input, msg)
Logs the input matrix with the 'error' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method error(input, msg)
Logs the input matrix with the 'error' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method error(input, msg)
Logs the input matrix with the 'error' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method error(input, msg)
Logs the input matrix with the 'error' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method error(input, msg)
Logs the input matrix with the 'error' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method error(input, msg)
Logs the input matrix with the 'error' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method error(input, msg)
Logs the input matrix with the 'error' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method error(input, msg)
Logs the input matrix with the 'error' log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
Returns: The input matrix.
method error(input, msg)
Namespace types: matrix
Parameters:
input (matrix)
msg (string)
method log(input, msg, level)
Logs the input value with the specified log level.
Namespace types: chart.point
Parameters:
input (chart.point) : The input value to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input value.
method log(input, msg, level)
Logs the input value with the specified log level.
Namespace types: series float, simple float, input float, const float
Parameters:
input (float) : The input value to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input value.
method log(input, msg, level)
Logs the input value with the specified log level.
Namespace types: series int, simple int, input int, const int
Parameters:
input (int) : The input value to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input value.
method log(input, msg, level)
Logs the input value with the specified log level.
Namespace types: series bool, simple bool, input bool, const bool
Parameters:
input (bool) : The input value to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input value.
method log(input, msg, level)
Logs the input value with the specified log level.
Namespace types: series string, simple string, input string, const string
Parameters:
input (string) : The input value to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input value.
method log(input, msg, level)
Logs the input value with the specified log level.
Namespace types: series linefill
Parameters:
input (linefill) : The input value to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input value.
method log(input, msg, level)
Logs the input value with the specified log level.
Namespace types: series line
Parameters:
input (line) : The input value to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input value.
method log(input, msg, level)
Logs the input value with the specified log level.
Namespace types: series box
Parameters:
input (box) : The input value to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input value.
method log(input, msg, level)
Logs the input array with the specified log level.
Namespace types: series label
Parameters:
input (label) : The input array to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input array.
method log(input, msg, level)
Logs the input array with the specified log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input array.
method log(input, msg, level)
Logs the input array with the specified log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input array.
method log(input, msg, level)
Logs the input array with the specified log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input array.
method log(input, msg, level)
Logs the input array with the specified log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input array.
method log(input, msg, level)
Logs the input array with the specified log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input array.
method log(input, msg, level)
Logs the input array with the specified log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input array.
method log(input, msg, level)
Logs the input array with the specified log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input array.
method log(input, msg, level)
Logs the input array with the specified log level.
Namespace types: array
Parameters:
input (array) : The input array to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input array.
method log(input, msg, level)
Logs the input matrix with the specified log level.
Namespace types: array
Parameters:
input (array) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input matrix.
method log(input, msg, level)
Logs the input matrix with the specified log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input matrix.
method log(input, msg, level)
Logs the input matrix with the specified log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input matrix.
method log(input, msg, level)
Logs the input matrix with the specified log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input matrix.
method log(input, msg, level)
Logs the input matrix with the specified log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input matrix.
method log(input, msg, level)
Logs the input matrix with the specified log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input matrix.
method log(input, msg, level)
Logs the input matrix with the specified log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input matrix.
method log(input, msg, level)
Logs the input matrix with the specified log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input matrix.
method log(input, msg, level)
Logs the input matrix with the specified log level.
Namespace types: matrix
Parameters:
input (matrix) : The input matrix to log.
msg (string) : The message to log. Default is an empty string.
level (int) : The log level (1 - info, 2 - warning, 3 - error). Default is 1.
Returns: The input matrix.
method log(input, msg, level)
Namespace types: matrix
Parameters:
input (matrix)
msg (string)
level (int)
Frizlabz
HolidayLibrary "Holiday"
- Full Control over Holidays and Daylight Savings Time (DLS)
The Holiday Library is an essential tool for traders and analysts who engage in backtesting and live trading . This comprehensive library enables the incorporation of crucial calendar elements - specifically Daylight Savings Time (DLS) adjustments and public holidays - into trading strategies and backtesting environments.
Key Features:
- DLS Adjustments: The library takes into account the shifts in time due to Daylight Savings. This feature is particularly vital for backtesting strategies, as DLS can impact trading hours, which in turn affects the volatility and liquidity in the market. Accurate DLS adjustments ensure that backtesting scenarios are as close to real-life conditions as possible.
- Comprehensive Holiday Metadata: The library includes a rich set of holiday metadata, allowing for the detailed scheduling of trading activities around public holidays. This feature is crucial for avoiding skewed results in backtesting, where holiday trading sessions might differ significantly in terms of volume and price movement.
- Customizable Holiday Schedules: Users can add or remove specific holidays, tailoring the library to fit various regional market schedules or specific trading requirements.
- Visualization Aids: The library supports on-chart labels, making it visually intuitive to identify holidays and DLS shifts directly on trading charts.
Use Cases:
1. Strategy Development: When developing trading strategies, it’s important to account for non-trading days and altered trading hours due to holidays and DLS. This library enables a realistic and accurate representation of these factors.
2. Risk Management: Trading around holidays can be riskier due to thinner liquidity and greater volatility. By integrating holiday data, traders can better manage their risk exposure.
3. Backtesting Accuracy: For backtesting to be effective, it must simulate the actual market conditions as closely as possible. Incorporating holidays and DLS adjustments contributes to more reliable and realistic backtesting results.
4. Global Trading: For traders active in multiple global markets, this library provides an easy way to handle different holiday schedules and DLS shifts across regions.
The Holiday Library is a versatile tool that enhances the precision and realism of trading simulations and strategy development . Its integration into the trading workflow is straightforward and beneficial for both novice and experienced traders.
EasterAlgo(_year)
Calculates the date of Easter Sunday for a given year using the Anonymous Gregorian algorithm.
`Gauss Algorithm for Easter Sunday` was developed by the mathematician Carl Friedrich Gauss
This algorithm is based on the cycles of the moon and the fact that Easter always falls on the first Sunday after the first ecclesiastical full moon that occurs on or after March 21.
While it's not considered to be 100% accurate due to rare exceptions, it does give the correct date in most cases.
It's important to note that Gauss's formula has been found to be inaccurate for some 21st-century years in the Gregorian calendar. Specifically, the next suggested failure years are 2038, 2051.
This function can be used for Good Friday (Friday before Easter), Easter Sunday, and Easter Monday (following Monday).
en.wikipedia.org
Parameters:
_year (int) : `int` - The year for which to calculate the date of Easter Sunday. This should be a four-digit year (YYYY).
Returns: tuple - The month (1-12) and day (1-31) of Easter Sunday for the given year.
easterInit()
Inits the date of Easter Sunday and Good Friday for a given year.
Returns: tuple - The month (1-12) and day (1-31) of Easter Sunday and Good Friday for the given year.
isLeapYear(_year)
Determine if a year is a leap year.
Parameters:
_year (int) : `int` - 4 digit year to check => YYYY
Returns: `bool` - true if input year is a leap year
method timezoneHelper(utc)
Helper function to convert UTC time.
Namespace types: series int, simple int, input int, const int
Parameters:
utc (int) : `int` - UTC time shift in hours.
Returns: `string`- UTC time string with shift applied.
weekofmonth()
Function to find the week of the month of a given Unix Time.
Returns: number - The week of the month of the specified UTC time.
dayLightSavingsAdjustedUTC(utc, adjustForDLS)
dayLightSavingsAdjustedUTC
Parameters:
utc (int) : `int` - The normal UTC timestamp to be used for reference.
adjustForDLS (bool) : `bool` - Flag indicating whether to adjust for daylight savings time (DLS).
Returns: `int` - The adjusted UTC timestamp for the given normal UTC timestamp.
getDayOfYear(monthOfYear, dayOfMonth, weekOfMonth, dayOfWeek, lastOccurrenceInMonth, holiday)
Function gets the day of the year of a given holiday (1-366)
Parameters:
monthOfYear (int)
dayOfMonth (int)
weekOfMonth (int)
dayOfWeek (int)
lastOccurrenceInMonth (bool)
holiday (string)
Returns: `int` - The day of the year of the holiday 1-366.
method buildMap(holidayMap, holiday, monthOfYear, weekOfMonth, dayOfWeek, dayOfMonth, lastOccurrenceInMonth, closingTime)
Function to build the `holidaysMap`.
Namespace types: map
Parameters:
holidayMap (map) : `map` - The map of holidays.
holiday (string) : `string` - The name of the holiday.
monthOfYear (int) : `int` - The month of the year of the holiday.
weekOfMonth (int) : `int` - The week of the month of the holiday.
dayOfWeek (int) : `int` - The day of the week of the holiday.
dayOfMonth (int) : `int` - The day of the month of the holiday.
lastOccurrenceInMonth (bool) : `bool` - Flag indicating whether the holiday is the last occurrence of the day in the month.
closingTime (int) : `int` - The closing time of the holiday.
Returns: `map` - The updated map of holidays
holidayInit(addHolidaysArray, removeHolidaysArray, defaultHolidays)
Initializes a HolidayStorage object with predefined US holidays.
Parameters:
addHolidaysArray (array) : `array` - The array of additional holidays to be added.
removeHolidaysArray (array) : `array` - The array of holidays to be removed.
defaultHolidays (bool) : `bool` - Flag indicating whether to include the default holidays.
Returns: `map` - The map of holidays.
Holidays(utc, addHolidaysArray, removeHolidaysArray, adjustForDLS, displayLabel, defaultHolidays)
Main function to build the holidays object, this is the only function from this library that should be needed. \
all functionality should be available through this function. \
With the exception of initializing a `HolidayMetaData` object to add a holiday or early close. \
\
**Default Holidays:** \
`DLS begin`, `DLS end`, `New Year's Day`, `MLK Jr. Day`, \
`Washington Day`, `Memorial Day`, `Independence Day`, `Labor Day`, \
`Columbus Day`, `Veterans Day`, `Thanksgiving Day`, `Christmas Day` \
\
**Example**
```
HolidayMetaData valentinesDay = HolidayMetaData.new(holiday="Valentine's Day", monthOfYear=2, dayOfMonth=14)
HolidayMetaData stPatricksDay = HolidayMetaData.new(holiday="St. Patrick's Day", monthOfYear=3, dayOfMonth=17)
HolidayMetaData addHolidaysArray = array.from(valentinesDay, stPatricksDay)
string removeHolidaysArray = array.from("DLS begin", "DLS end")
܂Holidays = Holidays(
܂ utc=-6,
܂ addHolidaysArray=addHolidaysArray,
܂ removeHolidaysArray=removeHolidaysArray,
܂ adjustForDLS=true,
܂ displayLabel=true,
܂ defaultHolidays=true,
܂ )
plot(Holidays.newHoliday ? open : na, title="newHoliday", color=color.red, linewidth=4, style=plot.style_circles)
```
Parameters:
utc (int) : `int` - The UTC time shift in hours
addHolidaysArray (array) : `array` - The array of additional holidays to be added
removeHolidaysArray (array) : `array` - The array of holidays to be removed
adjustForDLS (bool) : `bool` - Flag indicating whether to adjust for daylight savings time (DLS)
displayLabel (bool) : `bool` - Flag indicating whether to display a label on the chart
defaultHolidays (bool) : `bool` - Flag indicating whether to include the default holidays
Returns: `HolidayObject` - The holidays object | Holidays = (holidaysMap: map, newHoliday: bool, holiday: string, dayString: string)
HolidayMetaData
HolidayMetaData
Fields:
holiday (series string) : `string` - The name of the holiday.
dayOfYear (series int) : `int` - The day of the year of the holiday.
monthOfYear (series int) : `int` - The month of the year of the holiday.
dayOfMonth (series int) : `int` - The day of the month of the holiday.
weekOfMonth (series int) : `int` - The week of the month of the holiday.
dayOfWeek (series int) : `int` - The day of the week of the holiday.
lastOccurrenceInMonth (series bool)
closingTime (series int) : `int` - The closing time of the holiday.
utc (series int) : `int` - The UTC time shift in hours.
HolidayObject
HolidayObject
Fields:
holidaysMap (map) : `map` - The map of holidays.
newHoliday (series bool) : `bool` - Flag indicating whether today is a new holiday.
activeHoliday (series bool) : `bool` - Flag indicating whether today is an active holiday.
holiday (series string) : `string` - The name of the holiday.
dayString (series string) : `string` - The day of the week of the holiday.
.print()
You don't need to initialize anything..
After you import the library you can use .print() as easy as that..!
Hope this helps
* use a unique ID for each .print() call
let me know if you run into any bugs
by trying to make it as user friendly as possible i had to do
some not ideal things so there's a chance it could present some bugs with
a lot of labels present on the chart
and if you use label.all to parse and manipulate the labels on the chart..
most likely it will cause an issue but not a lot of people use this so
I don't think that will be a problem.
thanks,
FFriZz | frizlabz
Library "print"
Single function to print any type to console
method str(inp)
`method` convert all types to string
```
(overload)
*.str(any inp) => string
```
Namespace types: series string, simple string, input string, const string
Parameters:
inp (string) : `any` - desc | Required
Returns: `string` formatted string
method str(inp)
Namespace types: series int, simple int, input int, const int
Parameters:
inp (int)
method str(inp)
Namespace types: series float, simple float, input float, const float
Parameters:
inp (float)
method str(inp)
Namespace types: series bool, simple bool, input bool, const bool
Parameters:
inp (bool)
method str(inp)
Namespace types: series linefill
Parameters:
inp (linefill)
method str(inp)
Namespace types: series line
Parameters:
inp (line)
method str(inp)
Namespace types: series box
Parameters:
inp (box)
method str(inp)
Namespace types: series label
Parameters:
inp (label)
method str(inp)
Namespace types: matrix
Parameters:
inp (matrix)
method str(inp)
Namespace types: matrix
Parameters:
inp (matrix)
method str(inp)
Namespace types: matrix
Parameters:
inp (matrix)
method str(inp)
Namespace types: matrix
Parameters:
inp (matrix)
method str(inp)
Namespace types: matrix
Parameters:
inp (matrix)
method str(inp)
Namespace types: matrix
Parameters:
inp (matrix)
method str(inp)
Namespace types: matrix
Parameters:
inp (matrix)
method str(inp)
Namespace types: matrix
Parameters:
inp (matrix)
method str(inp)
Namespace types: linefill
Parameters:
inp (linefill )
method str(inp)
Namespace types: line
Parameters:
inp (line )
method str(inp)
Namespace types: box
Parameters:
inp (box )
method str(inp)
Namespace types: label
Parameters:
inp (label )
method str(inp)
Namespace types: string
Parameters:
inp (string )
method str(inp)
Namespace types: int
Parameters:
inp (int )
method str(inp)
Namespace types: float
Parameters:
inp (float )
method str(inp)
Namespace types: bool
Parameters:
inp (bool )
method arrayShorten(str)
arrayShorten
Namespace types: series string, simple string, input string, const string
Parameters:
str (string) : `string` - the string to shorten | Required
Returns: `string` - a shortened version of the input string if it is an array with more than 7 elements, otherwise the original string
method matrixShorten(str)
matrixShorten
Namespace types: series string, simple string, input string, const string
Parameters:
str (string) : `string` - the string to shorten | Required
Returns: `string` - the shortened matrix string if the input is a matrix, otherwise returns the input string as is
method print(x, ID)
print all types to theh same console with just this `method/function`
```
(overload)
*.print(any x, string ID, bool shorten=true?) => console
"param 'shorten' - only for arrays and matrixs" | true
```
Namespace types: series string, simple string, input string, const string
Parameters:
x (string) : - `any` input to convert
ID (string) : - `string` unique id for label on console `MUST BE UNIQUE`
Returns: adds the `ID` and the `inp` to the console on the chart
method print(x, ID)
Namespace types: series float, simple float, input float, const float
Parameters:
x (float)
ID (string)
method print(x, ID)
Namespace types: series int, simple int, input int, const int
Parameters:
x (int)
ID (string)
method print(x, ID)
Namespace types: series box
Parameters:
x (box)
ID (string)
method print(x, ID)
Namespace types: series bool, simple bool, input bool, const bool
Parameters:
x (bool)
ID (string)
method print(x, ID)
Namespace types: series label
Parameters:
x (label)
ID (string)
method print(x, ID)
Namespace types: series line
Parameters:
x (line)
ID (string)
method print(x, ID)
Namespace types: series linefill
Parameters:
x (linefill)
ID (string)
method print(x, ID, shorten)
Namespace types: string
Parameters:
x (string )
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: float
Parameters:
x (float )
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: int
Parameters:
x (int )
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: box
Parameters:
x (box )
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: bool
Parameters:
x (bool )
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: label
Parameters:
x (label )
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: line
Parameters:
x (line )
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: linefill
Parameters:
x (linefill )
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: matrix
Parameters:
x (matrix)
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: matrix
Parameters:
x (matrix)
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: matrix
Parameters:
x (matrix)
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: matrix
Parameters:
x (matrix)
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: matrix
Parameters:
x (matrix)
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: matrix
Parameters:
x (matrix)
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: matrix
Parameters:
x (matrix)
ID (string)
shorten (bool)
method print(x, ID, shorten)
Namespace types: matrix
Parameters:
x (matrix)
ID (string)
shorten (bool)
ObjectHelpersLibrary "ObjectHelpers"
Line | Box | Label | Linefill -- Maker, Setter, Getter Library
TODO: add table functionality
set(object)
set all params for `line`, `box`, `label`, `linefill` objects with 1 function
***
## Overloaded
***
```
method set(line Line, int x1=na, float y1=na, int x2=na, float y2=na,string xloc=na,string extend=na,color color=na,string style=na,int width=na,bool update=na) => line
```
### Params
- **Line** `line` - line object | `required`
- **x1** `int` - value to set x1
- **y1** `float` - value to set y1
- **x2** `int` - value to set x2
- **y2** `float` - value to set y2
- **xloc** `int` - value to set xloc
- **yloc** `int` - value to set yloc
- **extend** `string` - value to set extend
- **color** `color` - value to set color
- **style** `string` - value to set style
- **width** `int` - value to set width
- **update** `bool` - value to set update
***
```
method set(box Box,int left=na,float top=na,int right=na, float bottom=na,color bgcolor=na,color border_color=na,string border_style=na,int border_width=na,string extend=na,string txt=na,color text_color=na,string text_font_family=na,string text_halign=na,string text_valign=na,string text_wrap=na,bool update=false) => box
```
### Params
- **Box** `box` - box object
- **left** `int` - value to set left
- **top** `float` - value to set top
- **right** `int` - value to set right
- **bottom** `float` - value to set bottom
- **bgcolor** `color` - value to set bgcolor
- **border_color** `color` - value to set border_color
- **border_style** `string` - value to set border_style
- **border_width** `int` - value to set border_width
- **extend** `string` - value to set extend
- **txt** `string` - value to set _text
- **text_color** `color` - value to set text_color
- **text_font_family** `string` - value to set text_font_family
- **text_halign** `string` - value to set text_halign
- **text_valign** `string` - value to set text_valign
- **text_wrap** `string` - value to set text_wrap
- **update** `bool` - value to set update
***
```
method set(label Label,int x=na,float y=na, string txt=na,string xloc=na,color color=na,color textcolor=na,string size=na,string style=na,string textalign=na,string tooltip=na,string text_font_family=na,bool update=false) => label
```
### Paramas
- **Label** `label` - label object
- **x** `int` - value to set x
- **y** `float` - value to set y
- **txt** `string` - value to set text add`"+++"` to the _text striing to have the current label text concatenated to the location of the "+++")
- **textcolor** `color` - value to set textcolor
- **size** `string` - value to set size
- **style** `string` - value to set style (use "flip" ,as the style to have label flip to top or bottom of bar depending on if open > close and vice versa)
- **text_font_family** `string` - value to set text_font_family
- **textalign** `string` - value to set textalign
- **tooltip** `string` - value to set tooltip
- **update** `bool` - update label to next bar
***
```
method set(linefill Linefill=na,line line1=na,line line2=na,color color=na) => linefill
```
### Params
- **linefill** `linefill` - linefill object
- **line1** `line` - line object
- **line2** `line` - line object
- **color** `color` - color
Parameters:
object (obj)
Returns: `line`, `box`, `label`, `linefill`
method set(Line, x1, y1, x2, y2, xloc, extend, color, style, width, update)
set the location params of a line with 1 function auto detects time or bar_index for xloc param
Namespace types: series line
Parameters:
Line (line) : `line` - line object | `required`
x1 (int) : `int` - value to set x1
y1 (float) : `float` - value to set y1
x2 (int) : `int` - value to set x2
y2 (float) : `float` - value to set y2
xloc (string) : `int` - value to set xloc
extend (string) : `string` - value to set extend
color (color) : `color` - value to set color
style (string) : `string` - value to set style
width (int) : `int` - value to set width
update (bool) : `bool` - value to set update
Returns: `line`
method set(Box, left, top, right, bottom, bgcolor, border_color, border_style, border_width, extend, txt, text_color, text_font_family, text_halign, text_valign, text_wrap, update)
set the location params of a box with 1 function
Namespace types: series box
Parameters:
Box (box) : `box` - box object | `required`
left (int) : `int` - value to set left
top (float) : `float` - value to set top
right (int) : `int` - value to set right
bottom (float) : `float` - value to set bottom
bgcolor (color) : `color` - value to set bgcolor
border_color (color) : `color` - value to set border_color
border_style (string) : `string` - value to set border_style
border_width (int) : `int` - value to set border_width
extend (string) : `string` - value to set extend
txt (string) : `string` - value to set _text
text_color (color) : `color` - value to set text_color
text_font_family (string) : `string` - value to set text_font_family
text_halign (string) : `string` - value to set text_halign
text_valign (string) : `string` - value to set text_valign
text_wrap (string) : `string` - value to set text_wrap
update (bool) : `bool` - value to set update
Returns: `box`
method set(Label, x, y, txt, xloc, color, textcolor, size, style, textalign, tooltip, text_font_family, update)
set the location params of a label with 1 function auto detects time or bar_index for xloc param
Namespace types: series label
Parameters:
Label (label) : `label` | `required`
x (int) : `int` - value to set x
y (float) : `float` - value to set y
txt (string) : `string` - value to set text add`"+++"` to the _text striing to have the current label text concatenated to the location of the "+++")
xloc (string)
color (color)
textcolor (color) : `color` - value to set textcolor
size (string) : `string` - value to set size
style (string) : `string` - value to set style (use "flip" ,as the style to have label flip to top or bottom of bar depending on if open > close and vice versa)
textalign (string) : `string` - value to set textalign
tooltip (string) : `string` - value to set tooltip
text_font_family (string) : `string` - value to set text_font_family
update (bool) : `bool` - update label to next bar
Returns: `label`
method set(Linefill, line1, line2, color)
change the 1 or 2 of the lines in a linefill object
Namespace types: series linefill
Parameters:
Linefill (linefill)
line1 (line) : `line` - line object
line2 (line) : `line` - line object
color (color) : `color` - color
Returns: `linefill`
get(object)
get all of the location variables for `line`, `box`, `label` objects or the line objects from a `linefill`
***
## Overloaded
***
```
method get(line Line) =>
```
### Params
- **Line** `line` - line object | `required`
***
```
method get(box Box) =>
```
### Params
- **Box** `box` - box object | `required`
***
```
method get(label Label) =>
```
### Paramas
- **Label** `label` - label object | `required`
***
```
method get(linefill Linefill) =>
```
### Params
- **Linefill** `linefill` - linefill object | `required`
Parameters:
object (obj)
Returns: ` `
method get(Line)
Gets the location paramaters of a Line
Namespace types: series line
Parameters:
Line (line) : `line` - line object
Returns:
method get(Box)
Gets the location paramaters of a Box
Namespace types: series box
Parameters:
Box (box) : `box` - box object
Returns:
method get(Label)
Gets the `x`, `y`, `text` of a Label
Namespace types: series label
Parameters:
Label (label) : `label` - label object
Returns:
method get(Linefill)
Gets `line 1`, `line 2` from a Linefill
Namespace types: series linefill
Parameters:
Linefill (linefill) : `linefill` - linefill object
Returns:
method set_x(Line, x1, x2)
set the `x1`, `x2` of a line
***
### Params
- **Line** `line` - line object | `required`
- **x1** `int` - value to set x1 | `required`
- **x2** `int` - value to set x2 | `required`
Namespace types: series line
Parameters:
Line (line) : `line` - line object
x1 (int) : `int` - value to set x1
x2 (int) : `int` - value to set x2
Returns: `line`
method set_y(Line, y1, y2)
set `y1`, `y2` of a line
***
### Params
- **Line** `line` - line object | `required`
- **y1** `float` - value to set y1 | `required`
- **y2** `float` - value to set y2 | `required`
Namespace types: series line
Parameters:
Line (line) : `line` - line object
y1 (float) : `float` - value to set y1
y2 (float) : `float` - value to set y2
Returns: `line`
method Line(x1, y1, x2, y2, extend, color, style, width)
Similar to `line.new()` but can detect time or bar_index for xloc param and has defaults for all params but `x1`, `y1`, `x2`, `y2`
***
### Params
- **x1** `int` - value to set
- **y1** `float` - value to set
- **x2** `int` - value to set
- **y2** `float` - value to set
- **extend** `string` - extend value to set line
- **color** `color` - color to set line
- **style** `string` - style to set line
- **width** `int` - width to set line
Namespace types: series int, simple int, input int, const int
Parameters:
x1 (int) : `int` - value to set
y1 (float) : `float` - value to set
x2 (int) : `int` - value to set
y2 (float) : `float` - value to set
extend (string) : `string` - extend value to set line
color (color) : `color` - color to set line
style (string) : `string` - style to set line
width (int) : `int` - width to set line
Returns: `line`
method Box(left, top, right, bottom, extend, border_color, bgcolor, text_color, border_width, border_style, txt, text_halign, text_valign, text_size, text_wrap)
similar to box.new() with the but can detect xloc param and has defaults for everything but location params
***
### Params
- **left** `int` - value to set
- **top** `float` - value to set
- **right** `int` - value to set
- **bottom** `float` - value to set
- **extend** `string` - extend value to set box
- **border_color** `color` - color to set border
- **bgcolor** `color` - color to set background
- **text_color** `color` - color to set text
- **border_width** `int` - width to set border
- **border_style** `string` - style to set border
- **txt** `string` - text to set
- **text_halign** `string` - horizontal alignment to set text
- **text_valign** `string` - vertical alignment to set text
- **text_size** `string` - size to set text
- **text_wrap** `string` - wrap to set text
Namespace types: series int, simple int, input int, const int
Parameters:
left (int) : `int` - value to set
top (float) : `float` - value to set
right (int) : `int` - value to set
bottom (float) : `float` - value to set
extend (string) : `string` - extend value to set box
border_color (color) : `color` - color to set border
bgcolor (color) : `color` - color to set background
text_color (color) : `color` - color to set text
border_width (int) : `int` - width to set border
border_style (string) : `string` - style to set border
txt (string) : `string` - text to set
text_halign (string) : `string` - horizontal alignment to set text
text_valign (string) : `string` - vertical alignment to set text
text_size (string) : `string` - size to set text
text_wrap (string) : `string` - wrap to set text
Returns: `box`
method Label(txt, x, y, yloc, color, textcolor, style, size, textalign, text_font_family, tooltip)
Similar to label.new() but can detect time or bar_index for xloc param and has defaults for all params but x, y, txt, tooltip
***
### Params
- **txt** `string` - string to set
- **x** `int` - value to set
- **y** `float` - value to set
- **yloc** `string` - y location to set
- **color** `color` - label color to set
- **textcolor** `color` - text color to set
- **style** `string` - style to set
- **size** `string` - size to set
- **textalign** `string` - text alignment to set
- **text_font_family** `string` - font family to set
- **tooltip** `string` - tooltip to set
Namespace types: series string, simple string, input string, const string
Parameters:
txt (string) : `string` - string to set
x (int) : `int` - value to set
y (float) : `float` - value to set
yloc (string) : `string` - y location to set
color (color) : `color` - label color to set
textcolor (color) : `color` - text color to set
style (string) : `string` - style to set
size (string) : `string` - size to set
textalign (string) : `string` - text alignment to set
text_font_family (string) : `string` - font family to set
tooltip (string) : `string` - tooltip to set
Returns: `label`
obj
Fields:
obj (series__string)
Bitwise, Encode, DecodeLibrary "Bitwise, Encode, Decode"
Bitwise, Encode, Decode, and more Library
docs()
Hover-Over Documentation for inside Text Editor
bAnd(a, b)
Returns the bitwise AND of two integers
Parameters:
a : `int` - The first integer
b : `int` - The second integer
Returns: `int` - The bitwise AND of the two integers
bOr(a, b)
Performs a bitwise OR operation on two integers.
Parameters:
a : `int` - The first integer.
b : `int` - The second integer.
Returns: `int` - The result of the bitwise OR operation.
bXor(a, b)
Performs a bitwise Xor operation on two integers.
Parameters:
a : `int` - The first integer.
b : `int` - The second integer.
Returns: `int` - The result of the bitwise Xor operation.
bNot(n)
Performs a bitwise NOT operation on an integer.
Parameters:
n : `int` - The integer to perform the bitwise NOT operation on.
Returns: `int` - The result of the bitwise NOT operation.
bShiftLeft(n, step)
Performs a bitwise left shift operation on an integer.
Parameters:
n : `int` - The integer to perform the bitwise left shift operation on.
step : `int` - The number of positions to shift the bits to the left.
Returns: `int` - The result of the bitwise left shift operation.
bShiftRight(n, step)
Performs a bitwise right shift operation on an integer.
Parameters:
n : `int` - The integer to perform the bitwise right shift operation on.
step : `int` - The number of bits to shift by.
Returns: `int` - The result of the bitwise right shift operation.
bRotateLeft(n, step)
Performs a bitwise right shift operation on an integer.
Parameters:
n : `int` - The int to perform the bitwise Left rotation on the bits.
step : `int` - The number of bits to shift by.
Returns: `int`- The result of the bitwise right shift operation.
bRotateRight(n, step)
Performs a bitwise right shift operation on an integer.
Parameters:
n : `int` - The int to perform the bitwise Right rotation on the bits.
step : `int` - The number of bits to shift by.
Returns: `int` - The result of the bitwise right shift operation.
bSetCheck(n, pos)
Checks if the bit at the given position is set to 1.
Parameters:
n : `int` - The integer to check.
pos : `int` - The position of the bit to check.
Returns: `bool` - True if the bit is set to 1, False otherwise.
bClear(n, pos)
Clears a particular bit of an integer (changes from 1 to 0) passes if bit at pos is 0.
Parameters:
n : `int` - The integer to clear a bit from.
pos : `int` - The zero-based index of the bit to clear.
Returns: `int` - The result of clearing the specified bit.
bFlip0s(n)
Flips all 0 bits in the number to 1.
Parameters:
n : `int` - The integer to flip the bits of.
Returns: `int` - The result of flipping all 0 bits in the number.
bFlip1s(n)
Flips all 1 bits in the number to 0.
Parameters:
n : `int` - The integer to flip the bits of.
Returns: `int` - The result of flipping all 1 bits in the number.
bFlipAll(n)
Flips all bits in the number.
Parameters:
n : `int` - The integer to flip the bits of.
Returns: `int` - The result of flipping all bits in the number.
bSet(n, pos, newBit)
Changes the value of the bit at the given position.
Parameters:
n : `int` - The integer to modify.
pos : `int` - The position of the bit to change.
newBit : `int` - na = flips bit at pos reguardless 1 or 0 | The new value of the bit (0 or 1).
Returns: `int` - The modified integer.
changeDigit(n, pos, newDigit)
Changes the value of the digit at the given position.
Parameters:
n : `int` - The integer to modify.
pos : `int` - The position of the digit to change.
newDigit : `int` - The new value of the digit (0-9).
Returns: `int` - The modified integer.
bSwap(n, i, j)
Switch the position of 2 bits of an int
Parameters:
n : `int` - int to manipulate
i : `int` - bit pos to switch with j
j : `int` - bit pos to switch with i
Returns: `int` - new int with bits switched
bPalindrome(n)
Checks to see if the binary form is a Palindrome (reads the same left to right and vice versa)
Parameters:
n : `int` - int to check
Returns: `bool` - result of check
bEven(n)
Checks if n is Even
Parameters:
n : `int` - The integer to check.
Returns: `bool` - result.
bOdd(n)
checks if n is Even if not even Odd
Parameters:
n : `int` - The integer to check.
Returns: `bool` - result.
bPowerOfTwo(n)
Checks if n is a Power of 2.
Parameters:
n : `int` - number to check.
Returns: `bool` - result.
bCount(n, to_count)
Counts the number of bits that are equal to 1 in an integer.
Parameters:
n : `int` - The integer to count the bits in.
to_count `string` - the bits to count
Returns: `int` - The number of bits that are equal to 1 in n.
GCD(a, b)
Finds the greatest common divisor (GCD) of two numbers.
Parameters:
a : `int` - The first number.
b : `int` - The second number.
Returns: `int` - The GCD of a and b.
LCM(a, b)
Finds the least common multiple (LCM) of two integers.
Parameters:
a : `int` - The first integer.
b : `int` - The second integer.
Returns: `int` - The LCM of a and b.
aLCM(nums)
Finds the LCM of an array of integers.
Parameters:
nums : `int ` - The list of integers.
Returns: `int` - The LCM of the integers in nums.
adjustedLCM(nums, LCM)
adjust an array of integers to Least Common Multiple (LCM)
Parameters:
nums : `int ` - The first integer
LCM : `int` - The second integer
Returns: `int ` - array of ints with LCM
charAt(str, pos)
gets a Char at a given position.
Parameters:
str : `string` - string to pull char from.
pos : `int` - pos to get char from string (left to right index).
Returns: `string` - char from pos of string or "" if pos is not within index range
decimalToBinary(num)
Converts a decimal number to binary
Parameters:
num : `int` - The decimal number to convert to binary
Returns: `string` - The binary representation of the decimal number
decimalToBinary(num, to_binary_int)
Converts a decimal number to binary
Parameters:
num : `int` - The decimal number to convert to binary
to_binary_int : `bool` - bool to convert to int or to string (true for int, false for string)
Returns: `string` - The binary representation of the decimal number
binaryToDecimal(binary)
Converts a binary number to decimal
Parameters:
binary : `string` - The binary number to convert to decimal
Returns: `int` - The decimal representation of the binary number
decimal_len(n)
way of finding decimal length using arithmetic
Parameters:
n `float` - floating decimal point to get length of.
Returns: `int` - number of decimal places
int_len(n)
way of finding number length using arithmetic
Parameters:
n : `int`- value to find length of number
Returns: `int` - lenth of nunber i.e. 23 == 2
float_decimal_to_whole(n)
Converts a float decimal number to an integer `0.365 to 365`.
Parameters:
n : `string` - The decimal number represented as a string.
Returns: `int` - The integer obtained by removing the decimal point and leading zeroes from s.
fractional_part(x)
Returns the fractional part of a float.
Parameters:
x : `float` - The float to get the fractional part of.
Returns: `float` - The fractional part of the float.
form_decimal(a, b, zero_fix)
helper to form 2 ints into 1 float seperated by the decimal
Parameters:
a : `int` - a int
b : `int` - b int
zero_fix : `bool` - fix for trailing zeros being truncated when converting to float
Returns: ` ` - float = float decimal of ints | string = string version of b for future use to ref length
bEncode(n1, n2)
Encodes two numbers into one using bit OR. (fastest)
Parameters:
n1 : `int` - The first number to Encodes.
n2 : `int` - The second number to Encodes.
Returns: `int` - The result of combining the two numbers using bit OR.
bDecode(n)
Decodes an integer created by the bCombine function.(fastest)
Parameters:
n : `int` - The integer to decode.
Returns: ` ` - A tuple containing the two decoded components of the integer.
Encode(a, b)
Encodes by seperating ints into left and right of decimal float
Parameters:
a : `int` - a int
b : `int` - b int
Returns: `float` - new float of encoded ints one on left of decimal point one on right
Decode(encoded)
Decodes float of 2 ints seperated by decimal point
Parameters:
encoded : `float` - the encoded float value
Returns: ` ` - tuple of the 2 ints from encoded float
encode_heavy(a, b)
Encodes by combining numbers and tracking size in the
decimal of a floating number (slowest)
Parameters:
a : `int` - a int
b : `int` - b int
Returns: `float` - new decimal of encoded ints
decode_heavy(encoded)
Decodes encoded float that tracks size of ints in float decimal
Parameters:
encoded : `float` - encoded float
Returns: ` ` - tuple of decoded ints
decimal of float (slowest)
Parameters:
encoded : `float` - the encoded float value
Returns: ` ` - tuple of the 2 ints from encoded float
Bitwise, Encode, Decode Docs
In the documentation you may notice the word decimal
not used as normal this is because when referring to
binary a decimal number is a number that
can be represented with base 10 numbers 0-9
(the wiki below explains better)
A rule of thumb for the two integers being
encoded it to keep both numbers
less than 65535 this is because anything lower uses 16 bits or less
this will maintain 100% accuracy when decoding
although it is possible to do numbers up to 2147483645 with
this library doesnt seem useful enough
to explain or demonstrate.
The functions provided work within this 32-bit range,
where the highest number is all 1s and
the lowest number is all 0s. These functions were created
to overcome the lack of built-in bitwise functions in Pinescript.
By combining two integers into a single number,
the code can access both values i.e when
indexing only one array index
for a matrices row/column, thus improving execution time.
This technique can be applied to various coding
scenarios to enhance performance.
Bitwise functions are a way to use integers in binary form
that can be used to speed up several different processes
most languages have operators to perform these function such as
`<<, >>, &, ^, |, ~`
en.wikipedia.org
UnispacesLibrary "Unispaces"
Easier than looking up unicode spaces
spaces(sequence, string1, string2)
UNISPACES
Parameters:
sequence : (int) required | 123 = 3 spaces / 3 different sizes (one space per number can find spaces in hover over)
string1 : (str) optional | default = ""
string2 : (str) optional | default = ""
Returns: `string - concatenated string surrounding unispaces`
space(space, string1, string2)
UNISPACE
Parameters:
space : (int) optional | default = 0 | 0-15 (can find spaces in hover over)
string1 : (str) optional | default = ""
string2 : (str) optional | default = ""
Returns: `string - concatenated string surrounding a unispace `
Sub-Super Script and Roman numerals LibraryLibrary "Sub_Super_Script_and_RomanNumerals_Library"
Library to transform numbers into Roman numerals / Super-Sub script / check if value is alpha or number
isnumber(input)
check to see if value is a number
Parameters:
input : (string/float/int) value to check
Returns: (na) if value is NOT a number and input (string/float/int) if value is a number
isalpha(input)
check a string if it is alpha(doesnt contain numbers)
Parameters:
input
Returns: (string) if string input does NOT contain numbers, return (na) if input string contains numbers
super(num)
convert a string's numbers from normal print to super-script
Parameters:
num : (string/int/float) input value to transform
Returns: string of input with numbers converted to super-script
sub(num)
convert a string's numbers from normal print to sub-script
Parameters:
num : (string/int/float) input value to transform
Returns: string of input with numbers converted to sub-script
roman(num, trunc)
convert a string of numbers, float, or int
Parameters:
num : (string) input number to transform
trunc : (bool | false) true to truncate float value, false to show roman numerals with decimals (XX.VI)
Returns: string of roman numerals representing the input (num)
FrizLabz_Time_Utility_MethodsLibrary "FrizLabz_Time_Utility_Methods"
Some time to index and index to time helper methods made them for another library thought I would try to make
them as methods
UTC_helper(utc)
UTC helper function this adds the + to the positive utc times, add "UTC" to the string
and can be used in the timezone arg of for format_time()
Parameters:
utc : (int) | +/- utc offset
Returns: string | string to be added to the timezone paramater for utc timezone usage
bar_time(bar_amount)
from a time to index
Parameters:
bar_amount : (int) | default - 1)
Returns: int bar_time
time_to_index(_time)
from time to bar_index
Parameters:
_time : (int)
Returns: int time_to_index | bar_index that corresponds to time provided
time_to_bars_back(_time)
from a time quanity to bar quanity for use with .
Parameters:
_time : (int)
Returns: int bars_back | yeilds the amount of bars from current bar to reach _time provided
bars_back_to_time(bars_back)
from bars_back to time
Parameters:
bars_back
Returns: int | using same logic as this will return the
time of the bar = to the bar that corresponds to bars_back
index_time(index)
bar_index to UNIX time
Parameters:
index : (int)
Returns: int time | time in unix that corrresponds to the bar_index
to_utc(time_or_index, timezone, format)
method to use with a time or bar_index variable that will detect if it is an index or unix time
and convert it to a printable string
Parameters:
time_or_index : (int) required) | time in unix or bar_index
timezone : (int) required) | utc offset to be appled to output
format : (string) | default - "yyyy-MM-dd'T'HH:mm:ssZ") | the format for the time, provided string is
default one from str.format_time()
Returns: string | time formatted string
GET(line)
Gets the location paramaters of a Line
Parameters:
line : (line)
Returns: tuple
GET(box)
Gets the location paramaters of a Box
Parameters:
box : (box)
Returns: tuple
GET(label)
Gets the location paramaters and text of a Label
Parameters:
label : (label)
Returns: tuple
GET(linefill)
Gets line 1 and 2 from a Linefill
Parameters:
linefill : (linefill)
Returns: tuple
Format(line, timezone)
converts Unix time in time or index params to formatted time
and returns a tuple of the params as string with the time/index params formatted
Parameters:
line : (line) | required
timezone : (int) | default - na
Returns: tuple
Line(x1, y1, x2, y2, extend, color, style, width)
similar to line.new() with the exception
of not needing to include y2 for a flat line, y1 defaults to close,
and it doesnt require xloc.bar_time or xloc.bar_index, if no x1
Parameters:
x1 : (int) default - time
y1 : (float) default - close
x2 : (int) default - last_bar_time/last_bar_index | not required for line that ends on current bar
y2 : (float) default - y1 | not required for flat line
extend : (string) default - extend.none | extend.left, extend.right, extend.both
color : (color) default - chart.fg_color
style : (string) default - line.style_solid | line.style_dotted, line.style_dashed,
line.style_arrow_both, line.style_arrow_left, line.style_arrow_right
width
Returns: line
Box(left, top, right, bottom, extend, border_color, bgcolor, text_color, border_width, border_style, txt, text_halign, text_valign, text_size, text_wrap)
similar to box.new() but only requires top and bottom to create box,
auto detects if it is bar_index or time used in the (left) arg. xloc.bar_time and xloc.bar_index are not used
args are ordered by purpose | position -> colors -> styling -> text options
Parameters:
left : (int) default - time
top : (float) required
right : (int) default - last_bar_time/last_bar_index | will default to current bar index or time
depending on (left) arg
bottom : (float) required
extend : (string) default - extend.none | extend.left, extend.right, extend.both
border_color : (color) default - chart.fg_color
bgcolor : (color) default - color.new(chart.fg_color,75)
text_color : (color) default - chart.bg_color
border_width : (int) default - 1
border_style : (string) default - line.style_solid | line.style_dotted, line.style_dashed,
txt : (string) default - ''
text_halign : (string) default - text.align_center | text.align_left, text.align_right
text_valign : (string) default - text.align_center | text.align_top, text.align_bottom
text_size : (string) default - size.normal | size.tiny, size.small, size.large, size.huge
text_wrap : (string) default - text.wrap_auto | text.wrap_none
Returns: box
Label(x, y, txt, yloc, color, textcolor, style, size, textalign, text_font_family, tooltip)
similar to label.new() but only requires no args to create label,
auto detects if it is bar_index or time used in the (x) arg. xloc.bar_time and xloc.bar_index are not used
args are ordered by purpose | position -> colors -> styling -> text options
Parameters:
x : (int) default - time
y : (float) default - high or low | depending on bar direction
txt : (string) default - ''
yloc : (string) default - yloc.price | yloc.price, yloc.abovebar, yloc.belowbar
color : (color) default - chart.fg_color
textcolor : (color) default - chart.bg_color
style : (string) default - label.style_label_down | label.style_none
label.style_xcross,label.style_cross,label.style_triangleup,label.style_triangledown
label.style_flag, label.style_circle, label.style_arrowup, label.style_arrowdown,
label.style_label_up, label.style_label_down, label.style_label_left, label.style_label_right,
label.style_label_lower_left, label.style_label_lower_right, label.style_label_upper_left,
label.style_label_upper_right, label.style_label_center, label.style_square,
label.style_diamond
size : (string) default - size.normal | size.tiny, size.small, size.large, size.huge
textalign : (string) default - text.align_center | text.align_left, text.align_right
text_font_family : (string) default - font.family_default | font.family_monospace
tooltip : (string) default - na
Returns: label
FrizBugLibrary "FrizBug"
Debug Tools | Pinescript Debugging Tool Kit
All in one Debugger - the benefit of wrapper functions to simply wrap variables or outputs and have the code still execute the same. Perfect for Debugging on Pine
str(inp)
Overloaded tostring like Function for all type+including Object Variables will also do arrays and matricies of all Types
Parameters:
inp : All types
Returns: string
print_label(str, x_offset, y, barstate, style, color, textcolor, text_align, size)
Label Helper Function - only needs the Str input to work
Parameters:
str :
x_offset : offset from last bar + or -
y : price of label
barstate : barstate built in variable
style : label style settin7
color : color setting
textcolor : textcolor
text_align : text align setting
size : text_sise
Returns: label
init()
initializes the database arrays
Returns: tuple | 2 matrix (1 matrix is varip(live) the other is reagular var (Bar))
update(log, live, live_console, log_console, live_lbl, log_lbl)
Put at the very end of your code / This updates all of the consoles
Parameters:
log : This matrix is the one used for Bar updates
live : This matrix is the one used for Real Time updates
live_console : on_offs for the consoles and lbls - call in the update function
log_console : on_offs for the consoles and lbls - call in the update function
live_lbl : on_offs for the consoles and lbls - call in the update function
log_lbl : on_offs for the consoles and lbls - call in the update function
Returns: void
log(log, inp, str_label, off, rows, index_cols, bars_back)
Function Will push to the Console offset to the right of Current bar, This is the main Console - it has 2 Feeds left and right (changeable)"
Parameters:
log : Matrix - Log or Live
inp : All types
str_label : (optional) This input will label it on the feed
off : Useful for when you don't want to remove the function"
rows : when printing or logging a matrix this will shorten the output will show last # of rows"
index_cols : When printing or logging a array or matrix this will shorten the array or the columns of a matrix by the #"
bars_back : Adjustment for Bars Back - Default is 1 (0 for barstate.islast)"
Returns: inp - all types (The log and print functions can be used as wrapper functions see usage below for examples)
Print(log, str_label, off, bars_back)
Function can be used to send information to a label style Console, Can be used as a wrapper function, Similar to str.format use with str()
Parameters:
log :
str_label : (optional) Can be used to label Data sent to the Console
off : Useful for when you don't want to remove the function
bars_back : Adjustment for Bars Back - Default is 1 (0 for barstate.islast)
Returns: string
print(inp, str_label, off, bars_back)
This Function can be used to send information to a label style Console, Can be used as a wrapper function, Overload print function
Parameters:
inp : All types
str_label : string (optional) Can be used to label Data sent to the Console
off : Useful for when you don't want to remove the function
bars_back : Adjustment for Bars Back - Default is 1 (0 for barstate.islast)
Returns: inp - all types (The log and print functions can be used as wrapper functions see usage below for examples)
Credits:
@kaigouthro - for the font library
@RicardoSantos - for the concept I used to make this
Thanks!
Use cases at the bottom
BoxLine_LibLibrary "BoxLine_Lib"
personal Library for line and box built in functions
lineXY(x)
get x1,y1,x2,y2 in a tuple
Parameters:
x : TODO: line
Returns: tuple of x1,y1,x2,y2
line(x)
Create line with only the y1 value(when line == na) or all
when line != na set x1,y1,x2,y2 individually just 1 or all
- use just the line value to set the x2 to current bar or time will set to time
- will auto pick xloc.bar_index or xloc.bar_time if not used
Parameters:
x : (line line,int x1,float y1,int x2,float y2,
string xloc,string extend,color color,string style,int width)
Returns: Line
boxXY(x)
get left,top,right,bottom in a tuple
Parameters:
x : box
Returns: tuple of left,top,right,bottom
box(x)
Create line with only the top,bottom value(when line == na) or all
when box != na set left,top,right,bottom individually just 1 or all
- use just the box value to set the right to current bar or time will set to time
- if right is above a number that a bar_index wouldnt be
Parameters:
x : box box,int left,float top,int right,
float bottom,color border_color, int border_width,
string border_style,string extend,string xloc,
color bgcolor,string text,string text_size, color text_color,
string text_halign,string text_valign,string text_wrap)
Returns: TODO: Box
