Mulakan

Money Flow Index (MFI)

Triple CCI Strategy MFI Confirmed [Skyrexio]Overview Triple CCI Strategy MFI Confirmed leverages 3 different periods Commodity Channel Index (CCI) indicator in conjunction Money Flow Index (MFI) and Exponential Moving Average (EMA) to obtain the high probability setups. Fast period CCI is used for having the high probability to enter in the direction of short term trend, middle and slow period CCI are used for confirmation, if market now likely in the mid and long-term uptrend. MFI is used to confirm trade with the money inflow/outflow with the high probability. EMA is used as an additional trend filter. Moreover, strategy uses exponential moving average (EMA) to trail the price when it reaches the specific level. More information in "Methodology" and "Justification of Methodology" paragraphs. The strategy opens only long trades. Unique Features Dynamic stop-loss system: Instead of fixed stop-loss level strategy utilizes average true range (ATR) multiplied by user given number subtracted from the position entry price as a dynamic stop loss level. Configurable Trading Periods: Users can tailor the strategy to specific market windows, adapting to different market conditions. Four layers trade filtering system: Strategy utilizes two different period CCI indicators, MFI and EMA indicators to confirm the signals produced by fast period CCI. Trailing take profit level: After reaching the trailing profit activation level scrip activate the trailing of long trade using EMA. More information in methodology. Methodology The strategy opens long trade when the following price met the conditions: Fast period CCI shall crossover the zero-line. Slow and Middle period CCI shall be above zero-lines. Price shall close above the EMA. Crossover is not obligatory MFI shall be above 50 When long trade is executed, strategy set the stop-loss level at the price ATR multiplied by user-given value below the entry price. This level is recalculated on every next candle close, adjusting to the current market volatility. At the same time strategy set up the trailing stop validation level. When the price crosses the level equals entry price plus ATR multiplied by user-given value script starts to trail the price with EMA. If price closes below EMA long trade is closed. When the trailing starts, script prints the label “Trailing Activated”. Strategy settings In the inputs window user can setup the following strategy settings: ATR Stop Loss (by default = 1.75) ATR Trailing Profit Activation Level (by default = 2.25) CCI Fast Length (by default = 14, used for calculation short term period CCI) CCI Middle Length (by default = 25, used for calculation short term period CCI) CCI Slow Length (by default = 50, used for calculation long term period CCI) MFI Length (by default = 14, used for calculation MFI EMA Length (by default = 50, period of EMA, used for trend filtering EMA calculation) Trailing EMA Length (by default = 20) User can choose the optimal parameters during backtesting on certain price chart. Justification of Methodology Before understanding why this particular combination of indicator has been chosen let's briefly explain what is CCI, MFI and EMA. The Commodity Channel Index (CCI) is a momentum-based technical indicator that measures the deviation of a security's price from its average price over a specific period. It helps traders identify overbought or oversold conditions and potential trend reversals. The CCI formula is: CCI = (Typical Price − SMA) / (0.015 × Mean Deviation) Typical Price (TP): This is calculated as the average of the high, low, and closing prices for the period. Simple Moving Average (SMA): This is the average of the Typical Prices over a specific number of periods. Mean Deviation: This is the average of the absolute differences between the Typical Price and the SMA. The result is a value that typically fluctuates between +100 and -100, though it is not bounded and can go higher or lower depending on the price movement. The Money Flow Index (MFI) is a technical indicator that measures the strength of money flowing into and out of a security. It combines price and volume data to assess buying and selling pressure and is often used to identify overbought or oversold conditions. The formula for MFI involves several steps: 1. Calculate the Typical Price (TP): TP = (high + low + close) / 3 2. Calculate the Raw Money Flow (RMF): Raw Money Flow = TP × Volume 3. Determine Positive and Negative Money Flow: If the current TP is greater than the previous TP, it's Positive Money Flow. If the current TP is less than the previous TP, it's Negative Money Flow. 4. Calculate the Money Flow Ratio (MFR): Money Flow Ratio = Sum of Positive Money Flow (over n periods) / Sum of Negative Money Flow (over n periods) 5. Calculate the Money Flow Index (MFI): MFI = 100 − (100 / (1 + Money Flow Ratio)) MFI above 80 can be considered as overbought, below 20 - oversold. The Exponential Moving Average (EMA) is a type of moving average that places greater weight and significance on the most recent data points. It is widely used in technical analysis to smooth price data and identify trends more quickly than the Simple Moving Average (SMA). ​Formula: 1. Calculate the multiplier Multiplier = 2 / (n + 1) , Where n is the number of periods. 2. EMA Calculation EMA = (Current Price) × Multiplier + (Previous EMA) × (1 − Multiplier) This strategy leverages Fast period CCI, which shall break the zero line to the upside to say that probability of short term trend change to the upside increased. This zero line crossover shall be confirmed by the Middle and Slow periods CCI Indicators. At the moment of breakout these two CCIs shall be above 0, indicating that there is a high probability that price is in middle and long term uptrend. This approach increases chances to have a long trade setup in the direction of mid-term and long-term trends when the short-term trend starts to reverse to the upside. Additionally strategy uses MFI to have a greater probability that fast CCI breakout is confirmed by this indicator. We consider the values of MFI above 50 as a higher probability that trend change from downtrend to the uptrend is real. Script opens long trades only if MFI is above 50. As you already know from the MFI description, it incorporates volume in its calculation, therefore we have another one confirmation factor. Finally, strategy uses EMA an additional trend filter. It allows to open long trades only if price close above EMA (by default 50 period). It increases the probability of taking long trades only in the direction of the trend. ATR is used to adjust the strategy risk management to the current market volatility. If volatility is low, we don’t need the large stop loss to understand the there is a high probability that we made a mistake opening the trade. User can setup the settings ATR Stop Loss and ATR Trailing Profit Activation Level to realize his own risk to reward preferences, but the unique feature of a strategy is that after reaching trailing profit activation level strategy is trying to follow the trend until it is likely to be finished instead of using fixed risk management settings. It allows sometimes to be involved in the large movements. It’s also important to make a note, that script uses another one EMA (by default = 20 period) as a trailing profit level. Backtest Results Operating window: Date range of backtests is 2022.04.01 - 2024.11.25. It is chosen to let the strategy to close all opened positions. Commission and Slippage: Includes a standard Binance commission of 0.1% and accounts for possible slippage over 5 ticks. Initial capital: 10000 USDT Percent of capital used in every trade: 50% Maximum Single Position Loss: -4.13% Maximum Single Profit: +19.66% Net Profit: +5421.21 USDT (+54.21%) Total Trades: 108 (44.44% win rate) Profit Factor: 2.006 Maximum Accumulated Loss: 777.40 USDT (-7.77%) Average Profit per Trade: 50.20 USDT (+0.85%) Average Trade Duration: 44 hours These results are obtained with realistic parameters representing trading conditions observed at major exchanges such as Binance and with realistic trading portfolio usage parameters. How to Use Add the script to favorites for easy access. Apply to the desired timeframe and chart (optimal performance observed on 2h BTC/USDT). Configure settings using the dropdown choice list in the built-in menu. Set up alerts to automate strategy positions through web hook with the text: {{strategy.order.alert_message}} Disclaimer: Educational and informational tool reflecting Skyrex commitment to informed trading. Past performance does not guarantee future results. Test strategies in a simulated environment before live implementation
Strategi Pine Script®
oleh Skyrexio
MFI Strategy with Oversold Zone Exit and AveragingThis strategy is based on the Money Flow Index (MFI) and aims to enter a long position when the MFI exits an oversold zone, with specific rules for limit orders, stop-loss, and take-profit settings. Here's a detailed breakdown: Key Components 1. **Money Flow Index (MFI)**: The strategy uses the MFI, a volume-weighted indicator, to gauge whether the market is in an oversold condition (default threshold of MFI < 20). Once the MFI rises above the oversold threshold, it signals a potential buying opportunity. 2. **Limit Order for Long Entry**: Instead of entering immediately after the oversold condition is cleared, the strategy places a limit order at a price slightly below the current price (by a user-defined percentage). This helps achieve a better entry price. 3. **Stop-Loss and Take-Profit**: - **Stop-Loss**: A stop-loss is set to protect against significant losses, calculated as a percentage below the entry price. - **Take-Profit**: A take-profit target is set as a percentage above the entry price to lock in gains. 4. **Order Cancellation**: If the limit order isn’t filled within a specific number of bars (default is 5 bars), it’s automatically canceled to avoid being filled at a potentially suboptimal price as market conditions change. Strategy Workflow 1. **Identify Oversold Zone**: The strategy checks if the MFI falls below a defined oversold level (default is 20). Once this condition is met, the flag `inOversoldZone` is set to `true`. 2. **Wait for Exit from Oversold Zone**: When the MFI rises back above the oversold level, it’s considered a signal that the market is potentially recovering, and the strategy prepares to enter a position. 3. **Place Limit Order**: Upon exiting the oversold zone, the strategy places a limit order for a long position at a price below the current price, defined by the `Long Entry Percentage` parameter. 4. **Monitor Limit Order**: A counter (`barsSinceEntryOrder`) starts counting the bars since the limit order was placed. If the order isn’t filled within the specified number of bars, it’s canceled automatically. 5. **Set Stop-Loss and Take-Profit**: Once the order is filled, a stop-loss and take-profit are set based on user-defined percentages relative to the entry price. 6. **Exit Strategy**: The trade will close automatically when either the stop-loss or take-profit level is hit. Advantages - **Risk Management**: With configurable stop-loss and take-profit, the strategy ensures losses are limited while capturing profits at pre-defined levels. - **Controlled Entry**: The use of a limit order below the current price helps secure a better entry point, enhancing risk-reward. - **Oversold Exit Trigger**: Using the exit from an oversold zone as an entry condition can help catch reversals. Disadvantages - **Missed Entries**: If the limit order isn’t filled due to insufficient downward movement after the oversold signal, potential opportunities may be missed. - **Dependency on MFI Sensitivity**: As the MFI is sensitive to both price and volume, its fluctuations might not always accurately represent oversold conditions. Overall Purpose The strategy is suited for traders who want to capture potential reversals after oversold conditions in the market, with a focus on precise entries, risk management, and an automated exit plan.
Strategi Pine Script®
oleh traderhub
Customizable Non-Repainting HTF MACD MFI Scalper Bot Strategy v2Customizable Non-Repainting HTF MACD MFI Scalper Bot Strategy v2 This script was originally shared by Wunderbit as a free open source script for the community to work with. This is my second published iteration of this idea. WHAT THIS SCRIPT DOES: It is intended for use on an algorithmic bot trading platform but can be used for scalping and manual trading. This strategy is based on the trend-following momentum indicator . It includes the Money Flow index as an additional point for entry. This is a new and improved version geared for lower timeframes (15-5 minutes), but can be run on larger ones as well. I am testing it live as my high frequency trader. HOW IT DOES IT: It uses a combination of MACD and MFI indicators to create entry signals. Parameters for each indicator have been surfaced for user configurability. Take profits are now trailing profits, and the stop loss is now fixed. Why? I found that the trailing stop loss with ATR in the previous version yields very good results for back tests but becomes very difficult to deploy live due to transaction fees. As you can see the average trade is a higher profit percentage than the previous version. HOW IS MY VERSION ORIGINAL: Now instead of using ATR stop loss, we have a fixed stop loss - counter intuitively to what some may believe this performs better in live trading scenarios since it gives the strategy room to move. I noticed that the ATR trailing stop was stopping out too fast and was eating away balance due to transaction fees. The take profit on the other hand is now a trailing profit with a customizable deviation. This ensures that you can have a minimum profit you want to take in order to exit. I have depracated the old ATR trailing stop as it became too confusing to have those as different options. I kept the old version for others that want to experiment with it. The source code still requires some cleanup, but its fully functional. I added in a way to show RSI values and ATR values with a checkbox so that you can use the new an improved ATR Filter (and grab the right RSI values for the RSI filter). This will help to filter out times of very low volatility where we are unlikely to find a profitable trade. Use the "Show Data" checkbox to see what the values are on the indicator pane, then use those values to gauge what you want to filter out. Both versions Delayed Signals : The script has been refactored to use a time frame drop down. The higher time frame can be run on a faster chart (recommended on one minute chart for fastest signal confirmation and relay to algotrading platform.) Repainting Issues : All indicators have been recoded to use the security function that checks to see if the current calculation is in realtime, if it is, then it uses the previous bar for calculation. If you are still experiencing repainting issues based on intended (or non intended use), please provide a report with screenshot and explanation so I can try to address. Filtering : I have added to additional filters an ABOVE EMA Filter and a BELOW RSI Filter (both can be turned on and off) Customizable Long and Close Messages : This allows someone to use the script for algorithmic trading without having to alter code. It also means you can use one indicator for all of your different alterts required for your bots. HOW TO USE IT: It is intended to be used in the 5-30 minute time frames, but you might be able to get a good configuration for higher time frames. I welcome feedback from other users on what they have found. Find a pair with high volatility (example KUCOIN:ETH3LUSDT ) - I have found it works particularly well with 3L and 3S tokens for crypto. although it the limitation is that confrigurations I have found to work typically have low R/R ratio, but very high win rate and profit factor. Ideally set one minute chart for bots, but you can use other charts for manual trading. The signal will be delayed by one bar but I have found configurations that still test well. Select a time frame in configuration for your indicator calculations. Select the strategy config for time frame (resolution). I like to use 5 and 15 minutes for scalping scenarios, but I am interested in hearing back from other community memebers. Optimize your indicator without filters : customize your settings for MACD and MFI that are profitable with your chart and selected time frame calculation. Try different Take Profits (try about 2-5%) and stop loss (try about 5-8%). See if your back test is profitable and continue to optimize. Use the Trend, RSI, ATR Filter to further refine your signals for entry. You will get less entries but you can increase your win ratio. You can use the open and close messages for a platform integration, but I choose to set mine up on the destination platform and let the platform close it. With certain platforms you cannot be sure what your entry point actually was compared to Trading View due to slippage and timing, so I let the platform decide when it is actually profitable. Limitations: this works rather well for short term, and does some good forward testing but back testing large data sets is a problem when switching from very small time frame to large time frame. For instance, finding a configuration that works on a one minute chart but then changing to a 1 hour chart means you lose some of your intra bar calclulations. There are some new features in pine script which might be able to address, this, but I have not had a chance to work on that issue.
Strategi Pine Script®
oleh MauricioZuniga
14
Customizable Non-Repainting HTF MACD MFI Scalper Bot StrategyThis script was originally shared by Wunderbit as a free open source script for the community to work with. WHAT THIS SCRIPT DOES: It is intended for use on an algorithmic bot trading platform but can be used for scalping and manual trading. This strategy is based on the trend-following momentum indicator . It includes the Money Flow index as an additional point for entry. HOW IT DOES IT: It uses a combination of MACD and MFI indicators to create entry signals. Parameters for each indicator have been surfaced for user configurability. Take profits are fixed, but stop loss uses ATR configuration to minimize losses and close profitably. HOW IS MY VERSION ORIGINAL: I started trying to deploy this script myself in my algorithmic trading but ran into some issues which I have tried to address in this version. Delayed Signals : The script has been refactored to use a time frame drop down. The higher time frame can be run on a faster chart (recommended on one minute chart for fastest signal confirmation and relay to algotrading platform.) Repainting Issues : All indicators have been recoded to use the security function that checks to see if the current calculation is in realtime, if it is, then it uses the previous bar for calculation. If you are still experiencing repainting issues based on intended (or non intended use), please provide a report with screenshot and explanation so I can try to address. Filtering : I have added to additional filters an ABOVE EMA Filter and a BELOW RSI Filter (both can be turned on and off) Customizable Long and Close Messages : This allows someone to use the script for algorithmic trading without having to alter code. It also means you can use one indicator for all of your different alterts required for your bots. HOW TO USE IT: It is intended to be used in the 5-30 minute time frames, but you might be able to get a good configuration for higher time frames. I welcome feedback from other users on what they have found. Find a pair with high volatility (example KUCOIN:ETH3LUSDT ) - I have found it works particularly well with 3L and 3S tokens for crypto. although it the limitation is that confrigurations I have found to work typically have low R/R ratio, but very high win rate and profit factor. Ideally set one minute chart for bots, but you can use other charts for manual trading. The signal will be delayed by one bar but I have found configurations that still test well. Select a time frame in configuration for your indicator calculations. Select the strategy config for time frame. I like to use 5 and 15 minutes for scalping scenarios, but I am interested in hearing back from other community memebers. Optimize your indicator without filters (trendFilter and RSI Filter) Use the TrendFilter and RSI Filter to further refine your signals for entry. You will get less entries but you can increase your win ratio. I will add screenshots and possibly a video provided that it passes community standards. Limitations: this works rather well for short term, and does some good forward testing but back testing large data sets is a problem when switching from very small time frame to large time frame. For instance, finding a configuration that works on a one minute chart but then changing to a 1 hour chart means you lose some of your intra bar calclulations. There are some new features in pine script which might be able to address, this, but I have not had a chance to work on that issue.
Strategi Pine Script®
oleh MauricioZuniga
11
3 Indicator Strategy (StochRSI, MFI & EMA) With Safety OrdersThis strategy uses Stochastic RSI, Money Flow Index and EMA with settings for lower time-frames. It also features safety orders based on 3 different take profit and stop loss methods. Recommended Indicator Settings for lower time-frames; Stoch RSI: 1,1,100,100 MFI: 30 EMA: 100 Take Profit/Stop Loss Settings: There are 3 TP/SL types available; - Pips -> based on minticks - Base Value -> manually entering a value for the actual profit/loss. - Opposite Signal -> e.g. if the current open order is long, strategy waits for the next short signal.
Strategi Pine Script®
oleh ggekko21
1
MFI Simple StrategyHere I've made a simple strategy based off a simple moving average of an MFI length. Back tested on a BYBIT:BTCUSDT 30m chart. Conditions: ---When the price is above the golden SMA of 200 bars--- - Buy: when MFI is moving up - Sell: when MFI is moving down - Stop: golden SMA of 200 bars If you would like alerts: 1.) Add the strategy to your chart, 2.) Go to "Create Alert", 3.) Select "MFI Simple Strategy" in your alert creator, 4.) Select whatever notifications settings or message settings, 5.) Finally, click "Create" and you're good to go. Disclaimer: Please do your own research before making any decisions financially. Past results do not guarantee future results.
Strategi Pine Script®
oleh OztheWoz
[VJ]Thor for MFIThis is a simple intraday strategy for working on Stocks or commodities . You can modify the start time and end time based on your timezones. Session value should be from market start to the time you want to square-off Important: The end time should be at least 2 minutes before the intraday square-off time set by your broker Comment below if you get good returns Strategy: Indicators used : Moving average (MA) is a widely used technical indicator that smooths out price trends by filtering out the “noise” from random short-term price fluctuations. Here moving averages are used to identify trend direction and to determine support and resistance levels. Overbought and oversold regions are also taken into consideration The Money Flow Index ( MFI ) is a momentum indicator that measures the flow of money into and out of a security over a specified period of time. It is related to the Relative Strength Index ( RSI ) but incorporates volume , whereas the RSI only considers price. The MFI is calculated by accumulating positive and negative Money Flow values (see Money Flow ), then creating a Money Ratio. The Money Ratio is then normalized into the MFI oscillator form. Using the combination of Overbought and Oversold values and varying MFI and using the MA filter to ensure the direction , we can buy/sell when conditions are met Buying with MFI 1. MFI drops below 20 and enters inside oversold zone. 2. MFI bounces back above 20. 3. MFI pulls back but remains above 20. 4. A MFI break out above its previous high is a good buy signal. Selling with MFI 1. MFI rises above 80 and enters inside overbought zone. 2. MFI drops back below 80. 3. MFI rises slightly but remains below 80. 4. MFI drops lower than its previous low is a signal to short sell or profit booking Usage & Best setting : Choose a good volatile stock and a time frame - 5m. MFI factor : 3 Moving Average : 80 Overbought & Oversold - can be varied as per user There is stop loss and take profit that can be used to optimise your trade The template also includes daily square off based on your time.
Strategi Pine Script®
oleh vikris
1
Money Flow Index 5 min Strategy1 - Apply the 3 period Money Flow Index indicator to the 5 minute chart, using 0 and 100 as our oversold and overbought boundaries 2 - Wait for the MFI to reach overbought levels, that indicates the presence of "big sharks" in the market. Price needs to hold up the first two MFI overbought occurrences of the day to be considered as a bullish entry signal.* 3 - We buy when the MFI = 100 and the next candle is a bullish candle with short wicks. 4 - We place our Stop Loss below the low of the trading day and we Take Profit during the first 60 minutes after taking the trade. The logic above can be used in a mirrored fashion to take short entries, this is a custom parameter that can be modified from the strategy Inputs panel. * I'm using a SMA filter to avoid buying when the price is declining. Time frame was better at 15 min according to my test.
Strategi Pine Script®
oleh tweakerID
4
TradePro's Trading Idea Cipher Divergence EMA Pb StrategyHere I present you on of Trade Pro's Trading Idea: Cipher B+ Divergence EMA Pullback Strategy. Optimized the crypto pairBTC/USDT in the 30 minute chart. There is the possibility to switch between short and long positions. You can choose between 2 different take profit/stop loss types: The Lowest Low/ Highest High Stop Loss/ Take Profit and the ATR Take Profit/ Stop Loss. ----------------------------------------------------------------------------------- How does the strategy work? ENTRY Long The price must be above the 200 EMA . The price needs to make a pullback into the 50 EMA . Right after that, the Cipher B indicator must give a buy signal, it must be below the zero line and the Money Flow cloud must be green. Short Contrary to the premise of long positions. EXIT Lowest Low/ Highest High Exit The Lowest Low (long) / highest high (short) serves as the stop loss. The TP is formed on the basis of a factor. (Long for example: *Lowest Low* multiplied by *Profitfactor* = TP). ATR Exit The value of ATR at the time of buying is multiplied by the value entered in "Profit factor ATR" and "Stop factor ATR". As soon as the price reaches this value, it is closed. Important The script must be optimized for each coin or currency pair. However, only the values for the profit factor, the stop loss and Lowest Low / Highest High are relevant. Also, by changing the Chanel Length and the Chanel Average, you can create strong profit changes. The results of the strategy are without commissions and leverage. If you have any questions or feedback, please let me know in the comments. If you need more information about the strategy and want to know exactly how to apply it, check out my profile. There I have created a tutorial for the function of the script.
Strategi Pine Script®
oleh TradingStrategyCheck
29
Growth Producer Applicable to FTX:ETHPERP 15 min Relative volatility index (RVI) that will determine the entry and exit points only when the volatility will start to increase and Money Flow index as an additional point for entry. IMPORTANT • Input Partial take profits in your Bot settings • This is a trend strategy and works better in the trending market • We added the trend identifier using the EMA and SMA interaction • We added Take profit and stop loss levels • We added inputs for the period selection, so you could see how the strategy is performing on a monthly basis. • RVI for the entry conditions • MFI was added for the additional entries. • Partial Take-profits
Strategi Pine Script®
oleh Wunderbit
8
REAL STRATEGY : Dow_Factor_MFI/RSI_DVOG_StrategyI'm actually one of those who think it's more important to extract clues from indicators than strategy, but I wanted to test the data about the probability and dow factor I've shared for a long time. Usually, Bitcoin is used as an eye stain for strategy success, since the graph has increased significantly from the beginning. To prevent this, I used a commission and in the last lines of document I shared Bitmex's Bitcoin and Ethereum 1W test results. I don't think there's a factor to repaint. ( Warn me if u see or observe ) I considered Bitcoin because I found working with liquid parities much more realistic. Ethereum and Bitmex have been featured as a spot and may soon find a place at the CME , so I've evaluated the Ethereum . But since the Ethereum Bitmex was also spot new, I deleted results that were less than 10 closed trades. Since the Dow Theory also looks at the harmony in the indices, just try it in the Cryptocurrency market. Use as indicator in other markets. Support with channels, trend lines with big periods and other supportive indicators. And my personal suggestion : Use this script and indicator TF : 4H and above. Specifications : Commission. ( % 0.125 ) Switchable Methods ( Relative Strength Index / Money Flow Index ) Alarms. (Buy / Sell ) Position closure when horizontal market rates weighs. Progressive gradual buy/sell alarms. Clean code layout that will not cause repaint. (Caution : source = close ) Switchable barcolor option (I / 0 ) *****Test results :***** drive.google.com Summary: It was a realistic test. It has achieved great success in some markets, but as I mentioned earlier, use it only to gain insight into the price movements of cryptos. Use as indicator in other markets. This code is open source under the MIT license. If you have any improvements or corrections to suggest, please send me a pull request via the github repository : github.com Stay tuned ! Noldo.
Strategi Pine Script®
oleh Noldo
4
Gaussian MFI BFThe signals are based on the Gaussian Channel calculated by Donovan Wall. Thanks also to Kiasaki for Rate of Change code. Simply going long and short based on Gaussian channel was not consistent enough so I also included an MFI filter. We only go long if Money Flow Index is greater than the last candle (more money is flowing in than out). The opposite for short. Also employed Rate of Change function (white background) to avoid sideways market. A 2% stop loss seems to be the most balanced for this strategy but can can altered in the settngs. Also included a take-profit function but it seems this is best not implemented for this strategy, at least in the case of XBT/USD. A derivative of The MFI is also plotted on the chart simply to compare the current candle with the last candle visually. Background color: Green = Long Red = Short White = No Trade
Strategi Pine Script®
oleh bennef
1