AI Signal by QuantSignalsAI Signal by QuantSignals delivers cutting-edge AI-powered trading signals, designed to help traders spot opportunities without traditional technical analysis. Powered by QuantSignals’ advanced AI algorithms, this indicator provides simple buy and sell signals for stocks, forex, crypto, and more. Customize signal frequency to match your trading style and explore AI-driven insights at www.quantsignals.xyz
Key Features:
- AI-generated buy/sell signals
- No complex TA, perfect for all traders
- Customizable signal frequency
- Powered by QuantSignals’ AI technology
Join thousands of traders using AI to enhance their strategies. Visit www.quantsignals.xyz for premium signals and insights!
#AI #TradingSignals #QuantSignals #Crypto #Forex #Stocks
Options
Dhokiya's Research Analyst-Chetan DhokiyaDescription of "Dhokiya's Research Analyst - Chetan Dhokiya"
Overview: The "Dhokiya's Research Analyst" script is designed for traders who want to identify key price levels based on the first 5-minute candle of the trading day. This script operates within the Indian stock market's trading hours, specifically from 9:15 AM to 3:25 PM. It calculates and visualizes upper and lower price levels derived from the closing price of the first 5-minute candle, providing traders with potential support and resistance levels for the day.
Key Features:
Market Timing: The script is programmed to recognize the market's opening and closing times, ensuring that it only operates during active trading hours.
First 5-Minute Candle Identification: The script identifies the first 5-minute candle of the trading day, which is crucial for setting the day's initial price levels.
Dynamic Level Calculation: It calculates two key levels based on the closing price of the first 5-minute candle:
Upper Level: Set at 0.09% above the closing price of the first candle.
Lower Level: Set at 0.09% below the closing price of the first candle.
Visual Representation: The script draws horizontal lines on the chart to represent the upper and lower levels, allowing traders to easily visualize these critical price points. The upper level is indicated with a green line, while the lower level is shown with a red line.
Line Extension: The lines are dynamically extended throughout the trading day until the market closes at 3:25 PM, providing continuous reference points for traders.
How to Use:
Setup: Add the script to your trading platform during the market hours. Ensure that you are viewing a 5-minute chart for optimal results.
Trading Strategy: Use the upper and lower levels as potential entry and exit points. Traders may consider buying above the upper level and selling below the lower level, depending on market conditions and additional analysis.
Risk Management: Always incorporate risk management strategies when trading around these levels, as price action can be volatile.
Underlying Concepts:
The script leverages the concept of the first candle's price action to establish a framework for the day's trading. The rationale is that the initial price movement can set the tone for the rest of the trading day.
By calculating levels slightly above and below the first candle's close, the script aims to capture potential breakout and reversal points, which are critical for day trading strategies.
Conclusion: "Dhokiya's Research Analyst" is a valuable tool for traders looking to enhance their intraday trading strategies. By focusing on the first 5-minute candle and establishing key price levels, this script provides a structured approach to navigating the market's daily fluctuations. Traders are encouraged to combine these levels with other technical analysis tools and indicators for a comprehensive trading strategy.
0.09 Version Strategy Indicator by Dhokiya's Research Analyst
Mobile - 7575065656
Website - dhokiyas.com/
Email - care@dhokiyas.com
Support & Resitance [Dakon]Support & Resistance
The Support & Resistance indicator is designed to help traders identify key support and resistance levels in their trades, using pivot points and support/resistance zones. This indicator assists in finding important price levels that can act as critical areas for decision-making in trading.
Key Features:
Support and Resistance: The indicator draws key support and resistance levels on the chart, helping you easily identify important price zones.
Support/Resistance Zones: It provides the ability to draw support and resistance zones around the key levels, with adjustable width based on a percentage of the highest/lowest range in a given period.
Sensitivity Adjustment: The sensitivity of support and resistance levels can be customized to fit your trading strategy.
Line Style Options: Choose from different line styles such as Solid, Dotted, or Dashed for visual preference.
Auto Expand: Option to enable the expansion of support and resistance levels, allowing them to remain visible on the chart even as time progresses.
High and Low Zones: Display support and resistance zones around the high/low price levels in a specified period.
Settings:
Up Color: Choose the color for support levels.
Down Color: Choose the color for resistance levels.
SR On/Off: Enable or disable support and resistance level plotting.
Zones On/Off: Toggle the support/resistance zone display.
Expand SR: Enable or disable the expansion of support and resistance levels.
S/R Sensitivity: Adjust the sensitivity of support and resistance levels.
Line Style: Select from Solid, Dotted, or Dashed line styles.
Line Width: Adjust the line width for support and resistance levels.
Zone Width: Adjust the width of the support and resistance zones.
How to Use:
This indicator can be used on any time frame and is easy to incorporate into your trading strategy to identify potential entry and exit points.
To optimize the indicator, adjust the sensitivity settings to align with your trading style.
The Support & Resistance indicator is a useful tool for traders looking to accurately pinpoint support and resistance levels, improving trading performance by leveraging critical price zones.
Uday Samant Scalping SetupThis Is scalping setup use for Bank nifty options buying...
Price always moves around VWAP, Fractal give us potential reversal signal.
In this setup take entry next to fractal and Target at VWAP or 20 EMA which ever next to fractal.
Time Zone UTC-3This indicator highlights specific time zones on your chart based on the UTC-3 time zone — ideal for traders located in South America (such as Argentina, Brazil, Paraguay, etc.). It supports two fully customizable trading sessions, each with its own color, making it easy to visually track key market hours or your preferred trading times.
✅ Works with any symbol or market
✅ 24-hour time format supported
✅ Separate colors for each session
✅ Especially designed for traders in UTC-3
Use it to visually organize your trading day, mark session openings, or improve time-based strategies.
Binance Leveraged Liquidations ApproximationBinance Leveraged Liquidations Approximation (BLLA)
The Binance Leveraged Liquidations Approximation (BLLA) indicator is a tool designed to estimate liquidation levels for leveraged trading on Binance. It calculates the approximate prices at which liquidations could occur for long and short positions, based on the entry price and leverage levels selected by the user.
Key Features:
Liquidation Level Calculation:
Estimates liquidation prices for multiple leverage levels (e.g., 20x, 10x, 5x, etc.).
Supports both long and short positions.
Customization:
Allows the user to manually input the entry price or automatically calculate it as the midpoint between the low and high of a defined period.
Leverage levels are configurable, enabling the indicator to adapt to different trading strategies.
Clear Visualization:
Displays liquidation levels directly on the chart, with labels indicating the corresponding leverage.
Uses distinct colors for long positions (yellow) and short positions (blue).
Recommended Use:
Risk Management: Helps identify liquidation levels to adjust stop-loss orders and manage risk in leveraged trading.
Market Analysis: Provides a quick overview of key levels where significant price movements might occur due to mass liquidations.
Settings:
Entry Price: Enter manually or leave at 0.0 to calculate automatically.
Leverage: Configure desired leverage levels (e.g., 20x, 10x, 5x, etc.).
Transparency and Display: Adjust the transparency of the lines and the number of bars displayed.
Quick Instructions:
Add the indicator to your chart.
Enter the entry price or leave it at 0.0 to calculate automatically.
Configure leverage levels according to your strategy.
Observe liquidation levels on the chart and use them to manage your risk.
Note:
This indicator is an approximation and does not guarantee absolute accuracy of liquidation levels, as these may vary depending on market conditions and exchange policies.
vidya only apply on option chartapply on option chart for 5 min with white line sl and target line upward and trail
📋 Creative Trade Checklist ✅🆕 Trader Checklist Added to Chart! ✅
Discover Your Discipline Edge 🎯
Hey traders! I’ve just added a brand new Creative Trade Checklist at the top right corner of your chart to help you stay consistent and avoid emotional mistakes.
🧩 How it works:
Open the indicator settings
Under “Checklist”, toggle boxes like:
🟢 CALL Now
🔴 PUT Now
Structure confirmed (EMA/VWAP)
Pullback entry?
I feel neutral ✅
Took partials / Logged trade
Once selected, it automatically updates your chart with "X" so you can visually check off your process before and after each trade.
📍 Why it helps:
✔️ Reinforces discipline
✔️ Keeps emotions in check
✔️ Ensures trade quality
✔️ Helps you build a repeatable plan
🔧 You can turn the checklist on/off in settings and choose where it appears (top right, top left, etc).
This tool is made for serious traders who want consistency. Let me know what else you’d like added!
Happy scalping!
—Phil Vo 🧭
Put/Call Ratio SPYThe label you see on the last daily candle shows you the simulated value of the Put/Call Ratio (PCR).
What does this label tell you?
If it says 🔴 EXTREME FEAR → The simulated value of the PCR is above 1.2 (more puts than calls → bearish expectations).
If it says 🟢 EUPHORIA → The PCR is below 0.8 (more calls than puts → bullish expectations).
If it says 🟡 NEUTRAL ZONE → The PCR is between 0.8 and 1.2.
RS Screener Pro: 15M & 1D + Signal + VolumeCombines relative strength (RS) from 15-minute and 1-day timeframes with volume spike detection to highlight high-momentum setups. Displays a live signal table (Bullish, Bearish, Neutral) and flags relative volume spikes (RVOL > 1.5×). Great for directional traders, scalpers, and options momentum plays.
How to Use:
• ✅ Use when RS on both timeframes align to confirm directional momentum.
• 🔔 Watch for volume spikes (purple 🔼) to detect unusual activity.
• 📊 Check the signal table for real-time trend bias and relative volume readout.
• Best used on a 15-minute chart.
📝 Expandable NotesA clean and easy-to-use notes dashboard that lets you add up to 10 personal reminders and color-code them for better organization.
CCI Divergence Indicatorthis is the cci indicator. we add some more options for it and now you can see the divergence on it and set alert for that . you can set the options for chandelles and timeframes.
Unusual Whale - Unusual Options Volume Data ScreenerHow to Use:
Custom Expiration Date: Use the calendar/date picker to select the expiration date. The chosen date is automatically converted to the "YYMMDD" format.
Custom Base Strike: Enter a round strike value from the options chain (for example, "270"). This value serves as the starting point (at-the-money) for the scan.
Strike Increment: Select the increment (e.g., 0.50, 1.00, 2.5, 5, or 10) to determine how the scan moves outward from the custom base strike.
Options per Side (Max 20): Choose the number of valid option strikes to scan on each side. The script scans downward (for calls) and upward (for puts) from the custom base strike.
Base Symbol: The base symbol is always taken from the chart (using syminfo.ticker); no manual entry is needed.
Scanning & Aggregation: The script automatically constructs option symbols using the base symbol, custom expiration date, option type (C or P), and the formatted strike. It retrieves volume data for these options and aggregates the cumulative volume for calls and puts separately.
Plotting: Cumulative call volume is plotted in green, and cumulative put volume is plotted in red—only if the required number of valid options is found.
Benefits of Scanning Options Volume for Unusual Activity:
Offers a comprehensive view of volume across multiple strikes, making unusual or extreme volume patterns easier to detect.
Helps gauge market sentiment by comparing aggregated call and put volumes, which may signal shifts in investor behavior.
Aggregating volume from several strike levels provides smoother, more reliable data than using a single strike, enhancing your analytical insights.
What to Do If Combinations Don't Yield Results:
Verify Your Inputs: Ensure that the Custom Base Symbol, Expiration Date, and Custom Base Strike are entered correctly and correspond to an active options chain.
Adjust Strike Increment: If the options aren’t loading as expected, try selecting a different strike increment that more closely matches the spacing in your options chain.
Reduce Options per Side: Lower the number of Options per Side (e.g., from 20 to a lower value) if the scan fails to find enough valid strikes.
Review Your Options Chain: Confirm that the contracts for the specified expiration and strike range exist and are available in your data feed.
Check Data Subscription: Make sure your TradingView plan includes access to the options data required for the selected symbols.
Cumulative Call Volume is Green, Put Volume is Red
Horizontal Line at LevelsDraw 2 line for buy & Sell depends upon market movements , it help to enter the line
Gann Percentage of High & Low Prices for Options - Keanu_RiTzThis Indicator is based on the text from Chapter 4 "Percentage of High & Low Prices" page number "30" from the book "WD Gann 45 years in Wall Street".
This Indicator is to be used on Intraday Timeframes and only on Options Charts (CALL & PUT) and not on any other chart.
The following is the text from that page :-
One of the greatest discoveries I ever made was how to figure the percentage of high and low prices on the averages and individual stocks.
The percentages of extreme high and low levels indicate future resistance levels.
There is a relation between every low price to some future high price and a percentage of the low price indicates what levels to expect the next high price.
At this price you can sell out long stocks and sell short with a limited risk.
The extreme high price or any minor tops are related to future bottoms er low levels.
The percentage of the high price tells where to expect low prices in the future and gives you resistance levels where you can buy with a limited risk.
The most important resistance level is 50% of any high or low price.
Second in importance is 100% on the lowest selling price on the averages or individual stocks.
You must also use 200%, 300%, 400%, 500%, 600% or more, depending upon the price and the Time Periods from High and Low.
Third in importance is 25% of the Lowest price or the Highest price.
Fourth in importance is 121/2% of the extreme Low or extreme High price.
Fifth in importance is 61/4% of the Highest price, but this is only to be used when the averages or individual stocks are selling at very high levels.
Sixth in importance is 33 1/3 and 66 2/3%. These percentages should be calculated and watched for resistance next after 25% and after 50%.
You should always have percentage tables made up on the Industrial Averages and on the individual stocks you trade in in order to know where these important resistance levels are located.
Description :
It plots the Intraday % levels from the highest high and lowest low of that day.
The calculation of these levels is based on the text from Chapter 4 "Percentage of High & Low Prices" page number "30" from the book "WD Gann 45 years in Wall Street".
I developed this indicator to see if those percentages work on Options prices or not,
and from my observation I found that it works wonderfully in Options as well.
These % levels work like magic and act as great Dynamic Support and Resistance levels.
Don't trust my words blindly and see for yourself.
This indicator is for educational and research purpose only.
It does not provide any BUY/SELL signals.
Daily OHLC from 8:00 UTCDisplays Daily Open, High, and Low price levels, resetting at 8:00 AM UTC each day. Ideal for intraday trading reference points.
Double RSI OscillatorThe Double RSI Oscillator
Hello Gs,
I came back from the dead and tried to see what a little tweak to RSI could do, and I think it is quite interesting and might be worth checking out.
Warning:
This indicator has lots of false signals unfortunatly
How does the DRSI Oscillator work?
Very simple, the DRSI oscillator at the very base is just 2 RSIs that should smooth each other out, making a smoother trend signal generation for trend analysis. One RSI is set to have lower values, by considering the lowest point of the price, and one RSI is set to have higher values using pretty much the same thing. The trend changes from positive to negative if RSI with higher values crosses negative treshhold, and from negative to positive if RSI with lower value crosses positive treshhold. On top of this I added some additional settings to smooth or speed it further, if these were a good idea, I guess only time will tell :D.
Settings
Here is a guide of what setting changes what and how it might be suitable for you:
RSI Optimism length: length of the RSI with higher values (higher values will be better for longer term, lower for medium term)
RSI Pesimism length: length of the RSI with lower values (higher values will be better for longer term, lower for medium term)
Positive treshhold: The value RSI pesimism needs to pass in order to change trends (in case of using RSI avg. the value the average needs to pass), making this higher can give you faster signals, but expect more false ones
Negative treshholds: The value RSI optimism needs to pass in order to change trends (in case of using RSI avg. the value the average needs to pass), lowering this can give you faster signals, but expect more false ones
Smoothing type: Select the type of smoothing (or none) to smooth your signals as you want, this one you need to play around with.
Smoothing length: The length of your smoothing method (if none is selected it wont change anything)
Use RSI average instead: self-explanatory, go figure
Above/Below Mean Trend: Changes the way trend logic works
Why consider using this indicator?
The DRSI Oscillator is a tool that has huge flexibility (due to tons of settings that base RSI doesnt, like trend treshholds), and is smoother allowing traders and investors to get high quality or high speed signals, allowing great entries and exits
Option Contract Size CalculatorOption Contract Size Calculator
This indicator helps you to figure out the ideal number of contracts for your trade and its only used for options day trading.
The indicator needs to fill the input section in order to give you the information table that includes Contract size .
The input section consists of two sections. The first section requires user entry of the delta of the options contract from the broker chain and the stop loss size on the chart.
The second section allows you to enter your account balance and risk per trade
(2% recommended) .
There is also the option for where you wish to display your table like bottom right , bottom left or top right, top left.
special thanks to @Mohamedawke for the open source script this code is based off
Market Sessions & LevelsOverview
This Pine Script indicator identifies key trading levels and market sessions, making it easier for traders to analyze price movements. It highlights the previous day's high and low, tracks premarket price action, and marks the first 5-minute high and low after the market opens.
Features
✅ Identifies Market Sessions:
Pre-Market Session (4:30 AM - 9:30 AM EST)
Regular Market Session (9:30 AM - 4:00 PM EST)
✅ Tracks Key Levels:
Previous Day’s High & Low
Premarket High & Low
First 5-Minute High & Low after market open
✅ Visual Cues for Easy Analysis:
Plots horizontal lines for each level with distinct colors
Displays labels for key price levels on the chart
How It Helps Traders
📊 Pre-Market Preparation: Helps traders spot key resistance/support levels before the market opens.
🚀 Momentum Trading: The first 5-minute high/low can act as breakout or reversal zones.
📉 Historical Price Context: Uses the previous day's high/low to gauge market sentiment.
Customization
The script can be easily modified to adjust session timings, colors, or additional levels based on your trading strategy.
💡 How to Use:
Apply the script to a 1-minute or 5-minute chart for the most accurate premarket and first 5-minute tracking.
Look for price reactions at the plotted levels to determine potential trade setups.
Ryna 3 EMA Multi-Timeframe Indicator**EMA Multi-Timeframe Strategy (Pine Script v6)**
This TradingView indicator is designed to assist traders using a **multi-timeframe trend-following strategy** based on Exponential Moving Averages (EMAs).
**Core Functionality**
- **Trend Identification:**
Uses a configurable **EMA (e.g., EMA 50)** on a **higher timeframe** (e.g., H1, D1, W1) to determine the market bias:
- If price is **above** the trend EMA → **Long bias**
- If price is **below** the trend EMA → **Short bias**
- **Entry Signals:**
Uses two EMAs (fast & slow, e.g., EMA 8 & EMA 21) on either:
- The **current chart timeframe**, or
- A **separately selected timeframe** (e.g., entry on M15, trend on H1)
→ Signals are generated based on **EMA crossovers**:
- **Bullish crossover** (fast crosses above slow) → Long signal
- **Bearish crossover** (fast crosses below slow) → Short signal
- Only when aligned with the higher-timeframe trend
- **Visual Output:**
- Optional display of entry EMAs when sourced from the trend timeframe
- Always displays the trend EMA
- Entry signals shown with triangle markers on the chart
- **Info Panel (Top Center):**
- Shows selected timeframes and EMA settings
- Indicates current trend bias (LONG / SHORT / NEUTRAL)
- Notes if entry EMAs are hidden due to settings
- **Alerts:**
- Optional alerts for long and short entry signals based on EMA crossovers
#### **User Inputs**
- **Trend Timeframe & EMA Length**
- **Entry Timeframe & EMA Fast/Slow Lengths**
- **Option to show/hide entry EMAs when using the trend timeframe**
- **Option to show/hide Infobox on Chart**
Elliott Wave Identification By Akash Patel
This script is designed to visually highlight areas on the chart where there are consecutive bullish (green) or bearish (red) candles. It also identifies sequences of three consecutive candles of the same type (bullish or bearish) and highlights those areas with adjustable box opacity. Here's a breakdown of the functionality:
---
### Key Features:
1. **Bullish & Bearish Candle Identification:**
- **Bullish Candle:** When the closing price is higher than the opening price (`close > open`).
- **Bearish Candle:** When the closing price is lower than the opening price (`close < open`).
2. **Consecutive Candle Counter:**
- The script counts consecutive bullish and bearish candles, which resets when the direction changes (from bullish to bearish or vice versa).
- The script tracks these counts using the `bullishCount` and `bearishCount` variables, which are incremented based on whether the current candle is bullish or bearish.
3. **Highlighting Candle Areas:**
- If there are **3 or more consecutive bullish candles**, the script will highlight the background in a green color with 90% transparency (adjustable).
- Similarly, if there are **3 or more consecutive bearish candles**, the script will highlight the background in a red color with 90% transparency (adjustable).
4. **Three-Candle Sequence:**
- The script checks if there are three consecutive bullish candles (`threeBullish`) or three consecutive bearish candles (`threeBearish`).
- A box is drawn around these areas to visually highlight the sequence. The boxes extend to the right edge of the chart, and their opacity can be adjusted.
5. **Box Creation:**
- For bullish sequences, a green box is created using the high and low prices of the three candles in the sequence.
- For bearish sequences, a red box is created in the same manner.
- The box size is determined by the highest high and the lowest low of the three consecutive candles.
6. **Box Opacity:**
- You can adjust the opacity of the boxes through the input parameters `Bullish Box Opacity` and `Bearish Box Opacity` (ranging from 0 to 100).
- A higher opacity will make the boxes more solid, while a lower opacity will make them more transparent.
7. **Box Cleanup:**
- The script also includes logic to remove boxes when they are no longer needed, ensuring the chart remains clean without excessive box overlays.
8. **Extending Boxes to the Right:**
- When a bullish or bearish sequence is identified, the boxes are extended to the right edge of the chart for continued visibility.
---
### How It Works:
- **Bullish Area Highlight:** When three or more consecutive bullish candles are detected, the background will turn green to indicate a strong bullish trend.
- **Bearish Area Highlight:** When three or more consecutive bearish candles are detected, the background will turn red to indicate a strong bearish trend.
- **Three Consecutive Candle Box:** A green box will appear around three consecutive bullish candles, and a red box will appear around three consecutive bearish candles. These boxes can be extended to the right edge of the chart, making the sequence visually clear.
---
### Adjustable Parameters:
1. **Bullish Box Opacity:** Set the opacity (transparency) level of the bullish boxes. Ranges from 0 (completely transparent) to 100 (completely opaque).
2. **Bearish Box Opacity:** Set the opacity (transparency) level of the bearish boxes. Ranges from 0 (completely transparent) to 100 (completely opaque).
---
This indicator is useful for identifying strong trends and visually confirming market momentum, especially in situations where you want to spot sequences of bullish or bearish candles over multiple bars. It can be customized to suit different trading styles and chart preferences by adjusting the opacity of the boxes and background highlights.
Trading Capital Management for Option SellingTrading Capital Management for Option Selling
This Pine Script indicator helps manage trading capital allocation for option selling strategies based on price percentile ranking. It provides dynamic allocation recommendations for index options (NIFTY and BANKNIFTY) and individual stock positions.
Key Features:
- Dynamic buying power (BP) allocation based on close price percentile
- Flexible index allocation between NIFTY and BANKNIFTY
- Automated calculation of recommended number of stock positions
- Risk management through position size limits
- Real-time INDIA VIX monitoring
Main Parameters:
1. Window Length: Period for percentile calculation (default: 252 days)
2. Thresholds: Low (30%) and High (70%) percentile thresholds
3. Capital Settings:
- Trading Capital: Total capital available
- Max BP% per Stock: Maximum allocation per stock position
4. Buying Power Range:
- Low Percentile BP%: Base BP usage at low percentile
- High Percentile BP%: Maximum BP usage at high percentile
5. Index Allocation:
- NIFTY/BANKNIFTY split ratio
- Minimum and maximum allocation thresholds
Display:
The indicator shows two tables:
1. Common Metrics:
- Total BP Usage with percentage
- Current INDIA VIX value
- Current Close Price Percentile
2. Capital Allocation:
- Index-wise BP allocation (NIFTY and BANKNIFTY)
- Stock allocation pool
- Recommended number of stock positions with BP per stock
Usage:
This indicator helps traders:
1. Scale positions based on market conditions using price percentile
2. Maintain balanced exposure between indices and stocks
3. Optimize capital utilization while managing risk
4. Adjust position sizing dynamically with market volatility
Covered Call VisualYou enter Covered Call details and this draws the following lines:
Max Profit
Entry Price
Strike Price
Break even
You also enter entry and expiration dates and the lines will plot between those dates with the exception of the entry price.
