Mulakan

Titik pangsi dan tahap

Fractal Model (TTrades)Fractal Model - Higher Timeframe Analysis with TTFM Labeling A higher timeframe candle visualization tool enhanced with TTFM (The Fractal Model) labeling system for pivot-based price action analysis, made popular by Youtuber TTrades What This Script Does: This indicator displays higher timeframe candles on your current chart and identifies key pivot formations using the TTFM labeling system. It helps traders understand market structure and potential reversal points through systematic pivot analysis. Key Features: Higher Timeframe Visualization : Shows HTF candles without switching timeframes TTFM Labeling System : Identifies pivot components with C2, C3, and C4 labels T-Spot Detection : Marks areas where price is likely to form wicks based on pivot logic Sweep Confirmation : Detects when price sweeps previous levels but closes opposite Fair Value Gap Detection : Identifies imbalance zones between candle ranges Alert System : Sends alerts when T-spot formations are confirmed using pivot logic Silver T-Spot Alerts : Special alerts during specific market hours How TTFM Labeling Works: The TTFM system labels pivot formations based on their structure: C2 : The candle that "sticks out" - the initial move that creates the pivot C3 / C4 : The distribution candle that continues the reversal (standard pivots) Alert System: The indicator provides alerts when: T-spot formations are created and confirmed Price sweeps tspot levels with proper confirmation (This signal tries to alert you when a potential wick has formed in the tspot location Silver T-spot patterns occur during specific market hours T-spot sweep confirmations are triggered Practical Usage: Add the indicator to your chart Watch for T-spot formations (highlighted zones) Look for C2, C3, C4 labels to understand pivot structure Use sweep confirmations for entry timing Set up alerts for T-spot confirmations and sweeps Technical Implementation: Logarithmic Midpoint Calculation: The T-spot levels are calculated using logarithmic midpoint analysis: Log Values : log_high = ln(high), log_low = ln(low), log_open = ln(open), log_close = ln(close) Wick Analysis : upper_wick = log_high - max(log_open, log_close), lower_wick = min(log_open, log_close) - log_low Body Size : body_size = |log_close - log_open| Midpoint Logic : If max(upper_wick, lower_wick) > body_size, use wick-based midpoint; otherwise use (log_high + log_low)/2 Final Level : T-spot level = exp(log_mid_level) T-Spot Formation Conditions: Standard Bearish : last_closed.h > prev_closed.h AND last_closed.c < prev_closed.h Standard Bullish : last_closed.l < prev_closed.l AND last_closed.c > prev_closed.l Expansive Bearish : prev_closed.h > prev_prev_closed.h AND last_closed.c < max(prev_closed.o, prev_closed.c) Expansive Bullish : prev_closed.l < prev_prev_closed.l AND last_closed.c > min(prev_closed.o, prev_closed.c) Pro-trend Bearish : last_closed.h > mid_level AND last_closed.h < prev_closed.o AND last_closed.c < prev_closed.l Pro-trend Bullish : last_closed.l < mid_level AND last_closed.l > prev_closed.o AND last_closed.c > prev_closed.h Sweep Confirmation Logic: Pivot Detection : Uses ta.pivothigh(high, 1, 2) and ta.pivotlow(low, 1, 2) Touch Detection : Price must touch T-spot level (high > level OR open > level) AND close opposite Confirmation Requirements : Pivot must form before touch, close must break beyond pivot level Alert Trigger : Sweep confirmed when all conditions are met Silver T-Spot Conditions: Special T-spots during specific market hours (4th-5th candle of day or 4th candle after 1PM ET) with additional confirmation requirements. HTF Auto-Detection: Automatically selects appropriate higher timeframes: 1m→15m, 3m→30m, 5m→1h, 15m→4h, 30m-1h→1D, 4h-8h→1W, 1D→1M. Based on HTF Candles by Fadi, enhanced with T-spot detection, sweep logic, TTFM labeling system, and comprehensive alert functionality. Note: This tool is for educational purposes and should be used in conjunction with proper risk management and market analysis.
Penunjuk Pine Script®
oleh mindyourbuisness
MACD, RSI & Stoch + Divergences (RU)WARNING: This script is fully localized in Russian and is supported by the Russian-speaking community. All tooltips, settings, and descriptions are provided in Russian for maximum usability by Russian-speaking users. This script combines MACD, RSI, and Stochastic oscillators with automatic detection and visualization of regular and hidden divergences. It highlights potential reversal and trend continuation points, draws divergence lines and labels, and provides flexible settings for trend analysis and oscillator calculation. The script also includes advanced session timing and daily change visualization for intraday trading. Данный скрипт объединяет индикаторы MACD, RSI и Стохастик, а также автоматически определяет и визуализирует обычные и скрытые дивергенции. Он выделяет потенциальные точки разворота и продолжения тренда, строит линии и метки дивергенций, а также предоставляет гибкие настройки для анализа тренда и расчёта осцилляторов. Скрипт дополнительно отображает временные торговые сессии и динамику дневных изменений для удобства внутридневной торговли. Все параметры снабжены подробными русскоязычными подсказками (тултипами), что делает работу с инструментом максимально понятной и удобной для русскоязычных пользователей.
Penunjuk Pine Script®
oleh vslvnvch
Measured Move Volume XIndicator Description The "Measured Move Volume X" indicator, developed for TradingView using Pine Script version 6, projects potential price targets based on the measured move concept, where the magnitude of a prior price leg (Leg A) is used to forecast a subsequent move. It overlays translucent boxes on the chart to visualize bullish (green) or bearish (red) price projections, extending them to the right for a user-specified number of bars. The indicator integrates volume analysis (relative to a simple moving average), RSI for momentum, and VWAP for price-volume weighting, combining these into a confidence score to filter entry signals, displayed as triangles on breakouts. Horizontal key level lines (large, medium, small) are drawn at significant price points derived from the measured moves, with customizable thresholds, colors, and styles. Exhaustion hints, shown as orange labels near box extremes, indicate potential reversal points. Anomalous candles, marked with diamond shapes, are identified based on volume spikes and body-to-range ratios. Optional higher timeframe candle coloring enhances context. The indicator is fully customizable through input groups for lookback periods, transparency, and signal weights, making it adaptable to various assets and timeframes. Adjustment Tips for Optimization To optimize the "Measured Move Volume X" indicator for specific assets or timeframes, adjust the following input parameters: Leg A Lookback (default: 14 bars): Increase to 20-30 for volatile markets (e.g., cryptocurrencies) to capture larger price swings; decrease to 5-10 for intraday charts (e.g., stocks) for faster signals. Extend Box to the Right (default: 30 bars): Extend to 50+ for daily or weekly charts to project further targets; shorten to 10-20 for lower timeframes to reduce clutter. Volume SMA Length (default: 20) and Relative Volume Threshold (default: 1.5): Lower the threshold to 1.2-1.3 for low-volume assets (e.g., commodities) to detect subtler spikes; raise to 2.0+ for high-volume equities to filter noise. Match SMA length to RSI length for consistency. RSI Parameters (default: length 14, overbought 70, oversold 30): Set overbought to 80 and oversold to 20 in trending markets to reduce premature exit signals; shorten length to 7-10 for scalping. Key Level Thresholds (default: large 10%, medium 5%, small 5%): Increase thresholds (e.g., large to 15%) for volatile assets to focus on significant moves; disable medium or small lines to declutter charts. Confidence Score Weights (default: volume 0.5, VWAP 0.3, RSI 0.2): Increase volume weight (e.g., 0.7) for volume-driven markets like futures; emphasize RSI (e.g., 0.4) for momentum-focused strategies. Anomaly Detection (default: volume multiplier 1.5, small body ratio 0.2, large body ratio 0.75): Adjust the volume multiplier higher for stricter anomaly detection in noisy markets; fine-tune body-to-range ratios based on asset-specific candle patterns. Use TradingView’s replay feature to test adjustments on historical data, ensuring settings suit the chosen market and timeframe. Tips for Using the Indicator Interpreting Signals: Green upward triangles indicate bullish breakout entries when price exceeds the prior high with a confidence score ≥40; red downward triangles signal bearish breakouts. Use these to identify potential entry points aligned with the projected box targets. Box Projections: Bullish boxes project upward targets (top of box) equal to the prior leg’s height added to the breakout price; bearish boxes project downward. Monitor price action near box edges for target completion or reversal. Exhaustion Hints: Orange labels near box tops (bullish) or bottoms (bearish) suggest potential exhaustion when price deviates within the set percentage (default: 5%) and RSI or volume conditions are met. Use these as cues to watch for reversals. Key Level Lines: Large, medium, and small lines mark significant price levels from box tops/bottoms. Use these as potential support/resistance zones, especially when drawn with high volume (colored differently). Anomaly Candles: Orange diamonds highlight candles with unusual volume/body characteristics, indicating potential reversals or pauses. Combine with box levels for context. Higher Timeframe Coloring: Enable to color bars based on higher timeframe candle closures (e.g., 1, 2, 5, or 15 minutes) for added trend context. Customization: Toggle "Only Show Bullish Moves" to focus on bullish setups. Adjust transparency and line styles for visual clarity. Test settings to balance signal frequency and chart readability. Inputs: Organized into groups (e.g., "Measured Move Settings") using input.int, input.float, input.color, and input.bool for user customization, with tooltips for clarity. Calculations: Computes relative volume (ta.sma(volume, volLookback)), VWAP (ta.vwap(hlc3)), RSI (ta.rsi(close, rsiLength)), and prior leg extremes (ta.highest/lowest) using prior bar data ( ) to prevent repainting. Boxes and Lines: Creates boxes (box.new) for bullish/bearish projections and lines (line.new) for key levels. The f_addLine function manages line arrays (array.new_line), capping at maxLinesCount to avoid clutter. Confidence Score: Combines volume, VWAP distance, and RSI into a weighted score (confScore), filtering entries (≥40). Rounded for display. Exhaustion Hints: Functions like f_plotBullExitHint assess price deviation, RSI, and volume decrease, using label.new for dynamic orange labels. Entry Signals and Plots: plotshape displays triangles for breakouts; plot and hline show VWAP and RSI levels; request.security handles higher timeframe coloring. Anomaly Detection: Identifies candles with small-body high-volume or large-body average-volume patterns via ratios, plotted as diamonds.
Penunjuk Pine Script®
oleh kwsatterfield1
2
RSI HIGHs and LOWs MarkerThis indicator marks significant RSI (14) pivot points directly on the price chart. Red markers above candles highlight confirmed RSI highs where the RSI value exceeded 75 (overbought zone). Green markers below candles highlight confirmed RSI lows where the RSI value dropped below 25 (oversold zone). These signals help traders quickly identify potential reversal zones and overextended market conditions without having to monitor the RSI window separately.
Penunjuk Pine Script®
oleh jurleitv
VPT-style Close-to-Close Indicator📈Cumulative momentum (close-to-close × rel. volume) | MA & Donchian optional | ⚡ Alerts Key Features: - Tracks cumulative price momentum using close-to-close changes weighted by relative volume. - Optional smoothed line (SMA/EMA) to identify trend direction. - Optional Donchian channels to detect potential breakouts and breakdowns. - Includes alerts for: - Moving average crosses (bullish/bearish) - Local maxima/minima in cumulative momentum - Donchian upper/lower channel breakouts - Customizable inputs: smoothing length, channel lengths, scaling factor, and visibility toggles. - Visual cues: line colors indicate momentum direction (green = up, red = down). - Use Case: Quickly spot momentum shifts, trend direction, and breakout opportunities with clear alerts and visual cues.
Penunjuk Pine Script®
oleh nstatephysics
Chartlense Dashboard (Data, Trend & Levels)Chartlense Dashboard (Data, Trend & Levels) Overview This dashboard is designed to solve two common problems for traders: chart clutter and the manual drawing of support and resistance levels . It consolidates critical data from multiple indicators into a clean table overlay and automatically plots the most relevant S&R levels based on recent price action. The primary goal is to provide a clear, at-a-glance overview of the market's structure and data. It offers both a vertical and horizontal layout to fit any trader's workspace. Key Concepts & Calculations Explained This indicator is more than a simple collection of values; it synthesizes data to provide unique insights. Here’s a conceptual look at how its core components work: Automatic Support & Resistance (Pivot-Based): The dashed support (green) and resistance (red) lines are not manually drawn. They are dynamically calculated based on the most recent confirmed pivot highs and pivot lows . A pivot is a foundational concept in technical analysis that identifies potential turning points in price action. How it works: A pivot high is a candle whose `high` is higher than a specific number of candles to its left and right (the "Pivot Lookback" is set to 5 by default in the settings). A pivot low is the inverse. By automatically identifying these confirmed structural points, the script visualizes the most relevant levels of potential supply and demand on the chart. Relative Volume (RVOL): This value in the table is not the standard volume. It measures the current bar's volume against its recent average (specifically, `current volume / 10-period simple moving average of volume`). Interpretation: A reading above 2.0 (indicated by green text) suggests that the current volume is more than double the recent average. This technique is used to identify significant volume spikes, which can add conviction to breakouts or signal potential market climaxes. Consolidated Data for Context: Other values displayed in the table, such as the EMAs (9, 20, 200) , Bollinger Bands (20, 2) , RSI (14) , MACD (12, 26, 9) , and VWAP (on intraday charts), use their standard industry calculations. They are included to provide a complete contextual picture without needing to load each indicator separately, saving valuable chart space. How to Use This in Your Trading This dashboard is designed as a tool for confluence and context , not as a standalone signal generator. Here are some ways to integrate it into your analysis workflow: As a Trend Filter: Before considering a trade, quickly glance at the EMAs and the MACD values in the table. A price above the key EMAs and a positive MACD can serve as a quick confirmation that you are aligned with the dominant trend. To Validate Breakouts: When the price is approaching a key Resistance level (red pivot line), watch the RVOL value . A reading above 2.0 on the breakout candle adds significant confirmation that the move is backed by strong interest. The same logic applies to breakdowns below a support level. To Spot Potential Reversals: Confluence is key. For example, if the price is testing a Support level (green pivot line) AND the RSI in the table is approaching oversold levels (e.g., near 30), it can signal a higher probability reversal setup. About This Indicator This indicator was developed by the team at ChartLense to help traders declutter their charts and focus on the data that matters. We believe in making complex analysis more accessible and organized. We hope this free tool is a valuable addition to your trading process.
Penunjuk Pine Script®
oleh ChartLense
Premium ORB + ICT [GC Trading Systems] v1📘 Premium ORB + ICT – Documentation The Ultimate DOL Tool is a complete liquidity-based trading framework. It maps out key market levels where liquidity pools often form and provides structured entry models to help traders align with institutional order flow. 🔑 Features - Opening Range Breakout (ORB) – Plots the high/low of the selected opening range. - Session Levels – Automatically marks Asia, London, Previous Day, and Overnight highs/lows. - Fair Value Gaps (FVGs) – Highlights imbalances that occur above or outside of the ORB. - Higher-Timeframe FVGs (HTF FVGs) – Displays imbalances from higher timeframes for added context. Three Entry Models: - Reversal Model – iFVG above/below ORB (longs below ORB & shorts above ORB) - FVG Trend Model – FVG rebalances above/below ORB (longs above ORB & shorts below ORB) - iFVG Trend Model – iFVGs above/below ORB (longs above ORB & shorts below ORB) 📖 Key Concepts Opening Range Breakout (ORB) The Opening Range is the high and low of a defined initial period (e.g., the first 15/30/60 minutes of a session). - Acts as the first liquidity pool of the day. - Breakouts or reversals from these levels often set the tone for intraday moves. Fair Value Gaps (FVGs) A Fair Value Gap forms when price moves so quickly that a “gap” is left between three candles: - Candle 1 wick does not overlap with Candle 3 wick. - This creates an imbalance, showing inefficient price delivery. - Price may later return to this zone to “rebalance” before continuing. Higher-Timeframe FVGs (HTF FVGs) - Same principle as FVGs but drawn from higher timeframes (e.g., 1H, 4H, Daily). - Provides a bigger-picture view of liquidity and imbalance zones. - Acts as strong confluence for entries, targets, or areas of reaction. ⚙️ How to Use - Enable desired tools in the indicator settings (ORB, sessions, FVGs, HTF FVGs). - Monitor ORB and session levels for liquidity draws. - Use FVGs and HTF FVGs for context and confluence. - Scan entry models for valid setups. - Always pair setups with proper risk management. - Entry models are just possible entry ideas, don't use them as signals. beware of choppy price action. ⚠️ Disclaimer: This tool is for educational purposes only and does not guarantee profits. Trade responsibly.
Penunjuk Pine Script®
oleh yardcow
SP2L Pour Samadi Indicator [TradingFinder] Spike 2 Legs PA🔵 Introduction The SP2L (Spike–2Leg) strategy, designed by Mohammad Ali Poursamadi, an international Iranian trader, is a simple yet powerful price action setup developed to identify precise entry points following sharp market movements. A Spike refers to a sudden and rapid move in the market, usually triggered by a heavy flow of orders in one direction. This sharp movement creates an Imbalance between buyers and sellers. Since the market does not have time to trade evenly during such moves, it generates Inefficiency on the chart. The direct result of a spike is usually the formation of a Fair Value Gap (FVG) — a space between candles indicating that trades were not distributed fairly. In simple terms, the spike is the cause, while Imbalance, Inefficiency, and FVG are its consequences. 🟣 How is a Spike formed? Big Movement : A spike begins with a sharp and powerful move caused by heavy order flow in one direction. Imbalance : This move disrupts the balance between buyers and sellers. Inefficiency : Due to the speed of the move, the market fails to trade efficiently, leaving inefficiency on the chart. Fair Value Gap (FVG) : The final outcome is a price gap between candles, highlighting unfair distribution of trades. In SP2L, entries occur right after a spike. The entry logic is based on the structure of each candle’s Higher Lows (HLs) or Lower Highs (LHs). When a spike occurs and candles consecutively form higher lows or lower highs : In bullish conditions, each previous low becomes a potential Buy Entry. In bearish conditions, each previous high becomes a potential Sell Entry. 🔵 How to Use In the SP2L strategy, entries occur directly within the ongoing strong movement (the spike). A spike forms when heavy order flow pushes the market strongly in one direction, creating several large candles in sequence. This disrupts balance and leaves patterns such as Imbalance and FVG on the chart. During such moves, the market does not necessarily retrace; instead, it continues strongly in the direction of the spike. The key principle in SP2L is that candles begin forming Higher Lows (HLs) in a bullish spike or Lower Highs (LHs) in a bearish spike. Each HL or LH acts as a potential entry level, but the actual entry only triggers once price returns to retest that level. This allows the trader to enter within a powerful wave while keeping stop-losses clear and risk controlled. 🟣 Bullish SP2L When a bullish spike occurs, candles consecutively form Higher Lows. Each HL marks a potential entry. The entry is activated when price returns to that HL. Stop-Loss (SL) : Placed below the candle where the spike originated, usually the lowest point before the sharp move. Take-Profit (TP) : Defined based on classic risk-to-reward ratios, commonly TP1 = 1:1 and TP2 = 1:2. Stronger trends may allow extended targets. 🟣 Bearish SP2L When a bearish spike occurs, candles consecutively form Lower Highs. Each LH marks a potential sell entry. The entry is triggered when price returns to retest that LH. Stop-Loss (SL) : Placed above the candle where the bearish spike started, usually the highest point before the sharp drop. Take-Profit (TP) : Similar to bullish setups, typically TP1 = 1:1 and TP2 = 1:2, with extended targets possible if bearish momentum continues. 🔵 Settings 🟣 Spike Filter | Movement Minimum Spike Bars : Defines the minimum number of consecutive candles required for a valid spike. Movement Power : Enables or disables the momentum-based spike filter. Movement Power Level : Sets the strength threshold; higher values filter out weaker moves and only detect strong spikes. 🟣 Spike Filter | Gap Gap Filter : Enables or disables the gap filter. Gap Type : Selects which type of gap should be detected (All Gaps, Significant, Structural, Major). 🟣 Spike Filter | Doji Doji Tolerance : Defines whether doji candles are allowed within a spike. Max Doji Body Ratio : Maximum ratio of body-to-total candle size for classifying a candle as a doji. Max Doji in Spike Ratio : Maximum percentage of doji candles allowed within a spike. 🟣 Trend Detection Trend Detection : Enables or disables the trend detection module using dojis. Max Doji Body Ratio : Maximum body-to-candle ratio used to classify a doji in trend calculations. Candle Lookback : Number of candles used to calculate doji percentage for trend evaluation. Max Doji in Trend Ratio : Maximum percentage of doji candles allowed within the lookback window for the trend to be valid. 🟣 Position Management Stop-Loss Threshold : Enables or disables the stop-loss threshold feature. Stop-Loss Threshold Value : Defines the value of the stop-loss threshold for risk management. Risk-Reward Ratio : Sets the desired risk-to-reward ratio (e.g., 1:1 or 1:2). Include SL Threshold in R:R : Determines whether the stop-loss threshold is included in risk-to-reward calculations. 🟣 Display Settings Display Mode : Chooses between Setup (showing setups) or Signal (showing trade signals). Only Display the Last Position : Displays only the most recent position on the chart when enabled. 🔵 Conclusion The SP2L (Spike–2Leg) strategy, designed by Mohammad Ali Poursamadi, offers a simple yet effective framework for trading strong market flows. Built on the logic of spikes and candle structures (HLs and LHs), it identifies precise entry points directly within the main movement of the market, where risk is clear and reward is logical. With transparent rules, defined stop-loss placement, and flexible risk management, SP2L proves especially effective in volatile markets such as forex, gold, and indices. Its simplicity makes it practical for both beginner traders and seasoned professionals. In summary, SP2L helps traders avoid unnecessary complexity by focusing on spikes and consecutive HL/LH formations to capture accurate, low-risk entries.
Penunjuk Pine Script®
oleh TFlab
OrderBlock / FVG / BoS / Pivots (Multi-Tools) v 1.3Questo indicatore identifica e visualizza diversi pattern di price action utilizzati nel trading Smart Money Concepts (SMC). Ecco cosa fa: Funzionalità Principali -Order Blocks (OB) - Identifica blocchi di ordini istituzionali dove il prezzo potrebbe rimbalzare -Fair Value Gaps (FVG) - Rileva gap di prezzo che potrebbero essere riempiti -Break of Structure (BoS) - Segnala rotture di strutture di mercato importanti -Rejection Blocks (RJB) - Trova zone di rifiuto del prezzo -Premium Premium Discount Discount (PPDD) - Identifica order blocks formati dopo sweep di liquidità Caratteristiche Aggiuntive -Pivot Points - Visualizza massimi e minimi di mercato -High Volume Bars - Evidenzia candele con volume anomalo -Stacked OB+FVG - Segnala quando order block e fair value gap si sovrappongono Personalizzazione L'indicatore offre controlli completi per: -Colori personalizzabili per ogni elemento -Numero massimo di box visualizzabili -Trasparenza e stili dei bordi -Etichette e dimensioni -Opzioni per evidenziare zone "mitigate" (già testate dal prezzo) È uno strumento molto utile per trader che seguono la metodologia "Smart Money" e cercano di identificare dove gli operatori istituzionali potrebbero aver piazzato i loro ordini. //////////////////////////////////////////////////////////////////////////////// This indicator identifies and displays various price action patterns used in Smart Money Concepts (SMC) trading. Here's what it does: Main Features -Order Blocks (OB) - Identifies institutional order blocks where the price could bounce -Fair Value Gaps (FVG) - Detects price gaps that could be filled -Break of Structure (BoS) - Alerts breakouts of important market structures -Rejection Blocks (RJB) - Finds price rejection zones -Premium Premium Discount Discount (PPDD) - Identifies order blocks formed after liquidity sweeps Additional Features -Pivot Points - Displays market highs and lows -High Volume Bars - Highlights candles with abnormal volume -Stacked OB+FVG - Alerts when order blocks and fair value gaps overlap Customization The indicator offers complete controls for: -Customizable colors for each element -Maximum number of displayable boxes -Transparency and border styles -Labels and sizes -Options to highlight "mitigated" zones (already tested by the price) It's a tool Very useful for traders following the "Smart Money Concepts" and trying to identify where institutional traders may have placed their orders.
Penunjuk Pine Script®
oleh jake_theboss
First X Hours – Daily & Weekly (Auto-DST, Midlines & Labels)Description This indicator automatically plots the High, Low, and optional Midline of the first X trading hours for both the Daily and Weekly sessions. It is designed for traders who want to quickly identify early-session ranges and key levels that often act as intraday or intraweek support/resistance zones. ✅ Features: Works for both Daily and Weekly sessions (enable/disable individually). Fully configurable: choose how many hours to include (e.g., 8 hours). Adjustable start time (hour) and automatic DST handling using named timezones (e.g., Europe/London, New York, Sydney). Customizable line colours, thickness, and styles. Optional midline (average of high & low) for range balance levels. Optional labels with price tags for clear visibility. Lines can be extended to the right for forward-projection. 🔎 Use cases: Identify early-session ranges that may define the trading day or week. Track breakouts above/below first-X-hours ranges. Highlight key liquidity levels where price often reacts. Combine with your strategy for confirmation of reversals or continuations. ⚠️ Note: Indicator does not provide trading signals. Best used on intraday timeframes (e.g., 5m–1h) for daily ranges, and H1–H4 for weekly ranges.
Penunjuk Pine Script®
oleh docaguns
SPX ORB to 0DTE Credit Spreads (Signals & Webhooks)This indicator outputs signals and webhooks; it does not execute orders or manage positions. SPX ORB to 0DTE Credit Spreads identifies a 60-minute Opening Range (09:30–10:30 NY) and then, between 10:31–12:00, reacts to the first wick break: • If price wicks above the ORB high first, it prepares a PUT credit spread (fade of the upside break). • If price wicks below the ORB low first, it prepares a CALL credit spread (fade of the downside break). Strikes & visualization • Short/long strikes are derived from ORB high/low plus user-defined offsets and fixed spread width; preview lines are shown until the signal fires. • Day-of-week filters (separate for PUT/CALL). • Thresholds by percent or points to require a minimum ORB size. • ORB rectangle with range (pts/%) and end-of-day WIN/LOSE label (informational). • Optional probability box at the moment of the break (weighted ORB/ATR, ADX, ATR-regime). Alerts & webhooks • alertcondition for PUT/CALL. • When enabled, alert() pushes JSON suitable for either a DO server.js route or SignalStack (Tastytrade). This script itself does not place orders. How to use (quick) 1) Keep your chart on regular RTH minutes. The tool computes the ORB (09:30–10:30) and watches breaks until 12:00. 2) Set spread width ($), strike step, and offsets for short legs. Adjust thresholds (percent/points) and day filters. 3) Turn on alerts/webhooks if you want downstream automation. Verify payloads with paper trading first. Notes • No external data is fetched. This is a signal/automation helper around an ORB→0DTE credit spread workflow. It is not affiliated with any vendor. • Performance depends on fills, slippage, and execution workflow; results are not guaranteed. ---------------------------------------------------------------------------------------------------------------------- Este indicador emite señales y webhooks; no ejecuta órdenes por sí mismo. Detecta el Opening Range de 60 minutos (09:30–10:30 NY) y, entre 10:31–12:00, reacciona a la primera ruptura por mecha: • Si la mecha rompe por arriba del ORB High primero, prepara un crédito PUT (fade de la ruptura alcista). • Si rompe por abajo del ORB Low primero, prepara un crédito CALL (fade de la ruptura bajista). Strikes y visualización • Los strikes (short/long) se calculan desde el ORB con offsets y ancho fijo; se muestran líneas en “preview” hasta que dispare. • Filtros por día de la semana (PUT/CALL por separado). • Umbrales por porcentaje o puntos para exigir un rango mínimo. • Rectángulo ORB con rango (pts/%) y etiqueta WIN/LOSE al cierre (informativa). • Caja de probabilidad opcional al momento de la ruptura (ORB/ATR, ADX, ATR-régimen). Alertas y webhooks • alertcondition para PUT/CALL. • Si activas alert(), envía JSON para DO server.js o SignalStack (Tastytrade). Este script no coloca órdenes por sí mismo. Uso rápido 1) Mantén el gráfico en minutos RTH. El indicador calcula el ORB (09:30–10:30) y vigila rupturas hasta las 12:00. 2) Ajusta ancho del spread ($), paso de strike y offsets. Configura umbrales y filtros por día. 3) Activa alertas/webhooks si automatizas aguas abajo. Prueba primero en paper. Notas • No trae datos externos. Es un asistente de señal/automatización alrededor de ORB→0DTE credit spreads. No está afiliado a ningún proveedor. • El desempeño depende de fills, slippage y ejecución; no se garantizan resultados.
Penunjuk Pine Script®
oleh mauricio_a_morales
AriVestHub_SMCIntroduction to the AriVestHub_SMC Indicator: The AriVestHub_SMC indicator is designed and coded based on Smart Money Concepts (SMC). This tool has unique features that you won’t find in any other indicator built around SMC. I’ve been active in the crypto market since 2019, and besides using the SMC strategy, I also apply several custom strategies in my trading. Personalized versions of these strategies will gradually be shared with you as well. The main reason for developing this indicator was the gap in existing tools. Many times, setups like Valid Pullback or Inside Bar Candles appear on the chart but are not easily recognizable at first glance, and therefore they get ignored. This often leads to mistakes in Market Structure Mapping right from the beginning, which then causes errors in further analysis and predictions. Since the SMC strategy is entirely built on market structure, any mistake in identifying its key components basically destroys the reliability of the analysis. Unlike similar indicators that mostly just draw nice lines and zones on the chart for promotional purposes, AriVestHub_SMC aims to show the reality of the market, not beautify it. Price behavior is the result of trader psychology and the clash of different views—it doesn’t have to look neat and pretty all the time. This indicator shows exactly what has happened in the market and the possible scenarios ahead. Once you use this tool and study this guide, you’ll clearly feel the difference compared to other common indicators. My main goal in creating AriVestHub_SMC was to give real help to traders—not just to sell or commercialize it. The AriVestHub_SMC indicator is basically a Market Structure Mapping Engine (SMC Structure Mapping Engine), whose main task is to detect and accurately map market structure movements. ________________________________________ Its key features include: • BOS / CHoCH – Detecting • breakouts and changes in market character • IDM / Pullback – Confirming pivots and valid moves • OF / OB – Marking key supply and demand zones • SMT (Smart Money Trap) – Spotting invalid zones and smart money traps • Liquidity Sweeps / Equal High-Low – Liquidity hunts and reversal setups • Transfer Option – Automatically correcting structure in Single Leg scenarios ________________________________________ Basic Concepts in the AriVestHub_SMC Strategy 1. Inside Bar An Inside Bar is a candle (or group of candles) whose price range falls between the High and Low of the previous candle. In Smart Money and market structure analysis, these candles are usually ignored, and only the main candle is considered. Simply put, an Inside Bar signals market pause and energy buildup—a place where both buyers and sellers are waiting for price to decide its next direction. In the picture, you can see candles highlighted in a different color that fall within the main candle range. They should not be treated as independent candles, and all of them together should be considered as one. ________________________________________ 2. Pullback A pullback happens when price makes a temporary return after a main move. Even a single candle can cause it. In Smart Money, a valid pullback is defined as: • In an uptrend: if the Low of a candle breaks the Low of the previous candle which is not an Inside Bar, a valid pullback occurs. • In a downtrend: if the High of a candle breaks the High of the previous candle which is not an Inside Bar, a valid pullback occurs. Valid pullbacks are the points where the market gathers the energy needed to continue its move. In the image below, both valid and invalid pullbacks are shown. ________________________________________ 3. IDM – Inducement Inducement is one of the most important concepts in AriVestHub_SMC. Without IDM, no structure in Smart Money can form. Every valid pullback can be considered an IDM. There are two types: Major IDM and Minor IDM. Correctly identifying IDM is critical, because the entire market structure is mapped based on it. After each BOS or CHoCH, a new HH or LL pivot is only confirmed if the price returns and touches the IDM. • In an uptrend after BOS: the lowest price of the first valid pullback is the Major IDM, and the last pullback before reaching the Major IDM is the Minor IDM. • In an uptrend after CHoCH: the highest price of the first valid pullback is the Major IDM, and the last pullback before reaching the Major IDM is the Minor IDM. The same rules apply in reverse for downtrends. In this strategy, Major IDM always takes priority. The image shows different types of IDM, and the same applies for downtrends. ________________________________________ 4. BOS – Break of Structure A Break of Structure happens when price breaks its previous High or Low in the direction of the trend: • In an uptrend: if the previous HH is broken, BOS occurs. • In a downtrend: if the previous LL is broken, BOS occurs. BOS confirms continuation of the current market trend. ________________________________________ 5. CHoCH – Change of Character Change of Character occurs when price moves against the previous trend: • In an uptrend: if the previous LL is broken, CHoCH occurs. • In a downtrend: if the previous HH is broken, CHoCH occurs. CHoCH is usually a signal of a trend reversal or a deep market correction. The image shows the overall market structure with BOS and CHoCH. ________________________________________ 6. Order Flow Order Flow zones are formed from valid pullbacks and are usually points where price reacts strongly. They are defined as: • In an uptrend: Last Selling Momentum Before pushing upside • In a downtrend: Last Buying Momentum Before pushing dowside Three main types of Order Flow used in this strategy: • OF: Decisional (Dec) – The first valid OF after IDM, where the market makes its key decision. • OF: Extreme (Ext) – The last valid OF after IDM, acting as the final defense of buyers or sellers. • SMT – Smart Money Trap – All order zones before IDM, and those between Dec and Ext. These usually cause short-term, deceptive reactions and are not valid for trading. In addition: • Unmitigated Order Flow – A zone not yet touched, still a liquidity source. • Mitigated Order Flow – A zone that has been touched, with reduced validity. • Redefine Order Flow – Identifying internal OFs within a main unmitigated OF for more precise entries. The image shows the different types of OF. ________________________________________ 7. H/L Liquidity Sweep A Liquidity Sweep happens when price breaks a previous High or Low with a wick, but the candle body fails to close beyond it. • If the High is broken with a wick but the candle closes below it, a Liquidity Sweep occurs. • If the Low is broken with a wick but the candle closes above it, a Liquidity Sweep occurs. These setups are often signs of trapping traders and starting a move in the opposite direction. In fact, Liquidity Sweep points are among the best trading setups. ________________________________________ 🔑 Final Note All these concepts are like puzzle pieces: Inside Bar, Valid Pullback, IDM, BOS, CHoCH, Order Flow, and Liquidity Sweep. When combined, they create a clear and accurate picture of the market’s real behavior. ________________________________________ Indicator Settings 1. Analyze From … To … • Set the analysis time range. • Another use: In ping-pong structures, you can add another copy of the indicator to the chart, set the starting point at the recent HH or LL, and map the internal structure for counter-trend trading. ________________________________________ 2. Main • Confirm CHoCH with wicks → If enabled, only the wick (not the body) is considered for BOS and CHoCH confirmation. Useful for spotting subtle liquidity-based breaks. • Major / Minor IDM → Choose IDM type. • Consider Inside Bar → Best kept enabled, so candles inside the previous candle are ignored. ________________________________________ 3. Fib Ret • Min pullback retracement % → Set the minimum retracement level. • Helps identify valid pullbacks and gives more confidence in trend continuation. • Meaning: if BOS happens, price must at least retrace by the minimum percentage before expecting the trend to continue. ________________________________________ 4. BOS/CHoCH • Display BOS and CHoCH on the chart with customizable color and style. ________________________________________ 5. IDM • Mark previous IDM : Show past IDMs. • Mark live IDM : Show current active IDM. • Customize IDM display options. ________________________________________ 6. Pivots • Display HH and LL pivots. ________________________________________ 7. Transferring H/L IDM BOS/CHoCH • Transfer in case of lack idmB or idmS → When the move is Single Leg and no valid IDM exists in the recent move, HH, LL, and IDM must be shifted and corrected. This adjusts the market structure. • In case of transferring, remove all previous transferred Market Structure → If enabled, every time HH/LL and IDM need to be shifted, the transfer happens and the market structure is re-analyzed from scratch. • Important: Often after one transfer, another Single Leg appears. This option keeps adjusting structure automatically, while doing it manually would be slow and error-prone. ________________________________________ 8. Order Flow • Display Decisional, Extreme, and Supply/Demand OFs. ________________________________________ 9. H/L Sweeps • Detect Liquidity Sweeps at Highs and Lows. • These are very strong reversal setups. ________________________________________ 10. Equal High/Low • Show equal Highs and Lows where liquidity often accumulates. ________________________________________ 11. Moving Average • Add a moving average as a trend filter. • Option to choose type (SMA/EMA) and length (e.g., 50 or 200). • Usually: o MA50 → For mid-term trends, quick confirmation. o MA200 → For long-term trends, stronger confirmation. ________________________________________ 12. Internal Structure (ZigZag) • Show internal market structure as ZigZag. ________________________________________ 13. Inside Bar Candles • Display Inside Bars in color or with a box. Direct Message: Telegram.com/ArmanAria
Penunjuk Pine Script®
oleh arman_ariamanesh