Mulakan

Cari dalam skrip untuk "a股近10年第二天溢价的股票"

Short Volume StamperHello! BE SURE TO RUN THE SCRIPT WITH BAR REPLAY TO SEE WHAT IT DOES! I hope you like it! This script calculates the total short volume, total volume, and the short volume / total volume ratio since the 2-year high price. In addition, the approximate dollar value of all short volume since the 2-year high, and the approximate dollar value of all non-short sell volume since the 2-year high is calculated using VWAP. A red line (short interest ratio >= 20%) connects the 2-year high to current session’s high price; a green line (short interest ratio < 20%) connects the 2-year high to the current session’s high. The script also “stamps” sessions in which a NEW 1-year high in SHORT volume is achieved, and when a PIVOT POINT high is achieved (highest high over 51 sessions). When a new high in short volume is achieved the script aggregates the total volume and short volume for the 5 sessions prior to the new high, the session of the new high, and the 4 sessions after the new high (10 sessions). Additional volume calculations are performed for the 10 session period! When a pivot point high is achieved the script aggregates the total volume and short volume for the 3 sessions prior to the pivot high, the session of the pivot high, and the 2 sessions after the new high (6 sessions). Additional volume calculations are performed for the 6 session period! Red labels, red boxes, and red lines indicate a short volume ratio greater than or equal to 20% over the corresponding period! Green labels, green boxes, and green lines indicate a short volume ratio less than 20% over the corresponding period!
Penunjuk Pine Script®
oleh KioseffTrading
18
BTC Gravity OscillatorThis indicator is a deviation of a Center of Gravity Oscillator corrected for the diminishing returns of Bitcoin. I've set up this indicator for it to be used on the weekly timeframe. The indicator oscillates between 0 and 10, where 0 indicates oversold conditions and 10 indicates overbought conditions. The indicator plots in any BTCUSD spot, futures , BLX index and BTCEUR . It paints in all time frames, but Weekly time frame is the correct one to interpret the 'official' read of it.
Penunjuk Pine Script®
oleh nickolassteel
3
sma RSI & sudden buy and sell Strategy v1This strategy uses mostly three things:- 1. average RSI (sma rsi over a period) 2. sudden buy and sudden sell (usually to infer the change in trend or direction) 3. various EMAs ( used as a filter) I mostly build it to work on a 3min crypto chart but it should work on any timeframe or any symbol. Settings - Length -RSI length (hardly needed to be changed but sometimes it doubles the net profit)(+/-2) instant length - a sudden increase or decrease in the price calculated by the length of RSI (+/-10) Bars - No of candles to verify before starting /closing the strategy (+/-20) Lookbackno2 - another variable to verify ema opening/closing (hardly needed to change) emas - values of different EMAs (you can change if you want but I don't recommend it though) over40 and over60 - the value of overbuying and overselling(+/-10) In future, I will probably add ADX or use machine learning to filter out results It works well considering 0.05% commission per entry and exit (total of 1% per trade) you can message me for any query or suggestions.
Strategi Pine Script®
oleh samwillington
Previous N Days/Weeks/Months High LowJapanese below / 日本語説明は下記 This indicator displays previous N days/weeks/months’ highs and lows simultaneously. N is user input and users can separately input different N for highs and lows. For instance, if you would like to show past 20days high and 10days low, you specify 20 for high and 10 for low. Similar to highs and lows of yesterday, last week and last month which I previously developed a indicator for(see the link below), highs and lows of specific terms such as quarters are also respected as supports and resistances. A legendary trader group, Turtles also uses 20days high/low break as one of their strategies. Alerts can be set with the conditions below. -Crossing over previous day’s high -Crossing under previous day’s low -Crossing over previous week’s high -Crossing under previous week’s low -Crossing over previous month’s high -Crossing under previous month’s low Please note that when we say past 2 days in this indicator, past 2days mean yesterday and day before yesterday, so “today” is not included as “today’s” high/low have yet to be fixed. Related indicator: High/Low Yesterday&Last week&Last month&Last Year By combining with this indicator, you can highlight important support and resistance. ————————————————————— 過去N日/N週間/Nヶ月の高値·安値を同時に表示することのできるインジケーターです。 Nはパラメーターとなっており、また高値と安値で異なる期間を指定することができます。 例えば、過去20日間の高値と過去10日間の安値という指定が可能です。 昨日、先週、先月の高値·安値と同様に、四半期などの過去一定期間の高値·安値はサポート·レジスタンスとして良く意識されます。 伝説のトレーダー集団タートルズも20日間の高値·安値のブレイクを取引ルールの一つとして使用していたことで有名です。 また、以下の条件でアラート設定が可能です。 -過去N日高値の上方ブレイク -過去N日安値の下方ブレイク -過去N週間高値の上方ブレイク -過去N週間安値の下方ブレイク -過去Nヶ月高値の上方ブレイク -過去Nヶ月安値の下方ブレイク このインジケーターで過去2日間の高値·安値といった場合、過去2日間とは昨日と一昨日の2日間を指します。まだ高値·安値の確定していない本日は含まないことに注意してください。 関連インジケーター: High/Low Yesterday&Last week&Last month&Last Year 当インジケーターと合わせて使用することで、主要なサポートレジスタンスを表示することができます。
Penunjuk Pine Script®
oleh FX365_Thailand
9
TASC 2022.03 Relative Strength Volatility-Adjusted EMA█  OVERVIEW TASC's March 2022 edition of Traders' Tips includes the "Relative Strength Moving Averages - Part 3: The Relative Strength Volatility-Adjusted Exponential Moving Average" article authored by Vitali ​Apirine. This is the code that implements the "RS VolatAdj EMA" from the article. █  CONCEPTS In a three-part article series, Vitaly Apirine examines ways to filter price movements and define turning points by applying the Relative Strength concept to exponential moving averages . The resulting indicator is more responsive and is intended to account for the relative strength of volatility . █  CALCULATIONS The calculation process uses the following steps: Select an appropriate volatility index (in our case it is VIX ). Calculate up day volatility (UV) smoothed by a 10-day EMA. Calculate down day volatility (DV) smoothed by a 10-day EMA. Take the absolute value of the difference between UV and DV and divide by the sum of UV and DV. This is the Volatility Strength we need. Calculate a MLTP constant - the weighting multiplier for an exponential moving average. Combine Volatility Strength and MLTP to create an exponential moving average on current price data. Join TradingView!
Penunjuk Pine Script®
oleh PineCodersTASC
1
Donchian Screener█ OVERVIEW This is a screener script for the Donchian Channel indicator . It's an excellent indicator for trend following, a trading strategy which tries to take advantage of long, medium or short-term moves that seem to play out in various markets. █ DESCRIPTION The screener works by scanning through up to 10 symbols and list down symbols that are currently breaking through the upper or lower band as definied by the Donchian Channels, at which point the market signals the start of a bullish or bearish trend. █ HOW TO USE After adding the indicator, open the script settings and type the symbol name and length to be used on the Donchian Channels for each stock. █ PARAMETERS - Use High/Low Price Breakouts: check this box if you want to use price high/low instead of price close to identify breakouts - Panel Position: choose whether you want to position the panel on the top, middle or bottom right side of the graph (default is top) - Default Timeframe: what timeframe to use on the screener (default is daily) - Ticker: the ticker name you want to monitor - Length: length parameter used on Donchian Channel indicator █ FEATURES The screener can scan up to 10 symbols each time. █ LIMITATIONS The screener will scan the symbols breaking out bands on the current bar, and as such, there maybe some delays depending on the stock/ etf /crypto you choose. Some exchanges require an additional subscription to get realtime data.
Penunjuk Pine Script®
oleh starbolt
1
HiLo Screener█ OVERVIEW This is a screener script for the Gann Hilo Indicator . It's an excellent trend analysis indicator to spot trend reversals. █ DESCRIPTION The screener works by scanning through up to 10 symbols and list down symbols that are currently breaking the high or low mean averages as definied by the Gann Hilo Indicator. Once you add it, 2 panels will be added to your chart - the green panel will list the symbols reversing into a bullish trend and the red panel will show the symbols reversing into a bearish trend. █ HOW TO USE After adding the indicator, open the script settings and type the symbol name and length to be used on the Gann Hilo Indicator for each stock. █ FEATURES The screener can scan up to 10 symbols each time. █ LIMITATIONS The screener will scan the symbols reversing trend on the current bar, and as such, there maybe some delays depending on the stock/etf/crypto you choose. Some exchanges require an additional subscription to get realtime data.
Penunjuk Pine Script®
oleh starbolt
1
Fusion: Monster Breakout IndexThis indicator is designed to display on both the main chart and a separate chart area. If you want to display it on the main chart then flip the 4 display options. Well... you might want to: Disable it first Move it Flip the display options and then show it so the move doesn't look ugly. Display options: On a separate chart it will display red and lime bars showning potential breakouts. On the main chart it will show a channel. Personally like to see it both ways so I generally have two copies of it with one on the main chart. The " Bar back marker " option is a tiny down arrow at the top of the chart showing where the length of the lookback starts from the current bar. So, if you set the length to 10 then this will be 10 bars back from the current bar. You can show it on or off the main chart but it's not all that visually tasteful off the main chart. The length is certainly not some optimized setting so set to whatever suits your needs. The source I set at hl2 which makes more sense to me than the default most people use of close so again, don't assume the settings are correct for your environment... play with it. Credit: Modified from the "Monster Breakout Index" by racer8 under the licence of: This source code is subject to the terms of the Mozilla Public License 2.0 at mozilla.org The code is structured to easily drop into a bigger system so use it as a lone indicator or add the code to some bigger project you are creating. If you do, send me a note, it would be nice to know it's being well used. Finally, if you find value please do make a comment, give a thumbs up etc. Enjoy and good luck!
Penunjuk Pine Script®
oleh Koalems
action zone - ATR stop reverse order strategy v0.1 by 9nckACTION ZONE-ATR MOD v0.1 DOCUMENTATION Overview This tradingview pine script strategy is mainly created to enrich my coding skill. It is a combination of “CDC-ACTIONZONE” and my personal studies of trading techniques in various sources e.g.book, course or blog. This strategy purposefully built to connect with my automatic trading bot. However, It will be very useful to aid your trading routine by diminishing mental distraction which possibly leads to bad trades. How does it work? This strategy will do a basic simple thing that most traders do by creating entry signals on both sides long/short and also set the stop loss. Furthermore, It will also reverse the order (from long to short and vice versa (if long/short conditions are met). Finally, it will recalculate the stop loss/take profit price in every complete bar to increase the chance of winning and limit our loss. Entry rules(Long/Short) If you have no open order, an order will be created when a fast EMA crosses(up(long)/down(short) the slow EMA(It’s as simple as that). If you have an open order, the current order will be (sold if long, covered if short) and the opposite side order will be created. Exit and Reverse rules(Long/Short) If fast EMA cross (DOWN(long), UP(short)), the current order will be closed, THE OPPOSITE SIDE ORDER WILL ALSO BE CREATED. Risk management FLEX STOP PRICE : initial value will be set at the bar which order created. It is a fast ema (+/-) MIDDLE ATR value. If MIDDLE ATR value rises, it will be our new stop price. If MIDDLE ATR value falls, stop price unchanged If Price OVERBOUGHT(long)/SOLD(short), LOW of that bar will be a new stop price. Minimum position hold period In order to eliminate risk of repeatedly open, close orders in sideway trends. Minimum hold period must be passed to start exit our position. However, It always respects stop loss prices. The value refers to the number of bars. MUST READ!!! This strategy uses only MARKET ORDER. If you trade with a bot, make sure you choose only enormous market cap tokens. This strategy is bi-direction strategy. It will work best in the DERIVATIVE market. It was initially designed to compete in the cryptocurrency market which has very high volume and volatility. I only use this strategy in 1HR (acceptable change rate, optimum trade frequency) How (should) we use it? Choose crypto future pairs (recommend only top 10-15 market volume pairs in Binance, let’s say 1000M+ trade value) Choose your time frame (1H is strongly recommended) Setup your portfolio profile (Setting->Properties) such as Initial cap, order size, commission. DO NOT USE CAL ON EVERY TICK IT WILL CAUSE REPAINTING AND YOUR CAPITAL IS BLEEDING !!! BACKTEST FIRST!! Back test is a combination of art, math and statis(and a bit of luck). You can apply to train and test methods or whatever you are familiar with. In my opinion, your test period should include UPTREND, SIDEWAY, DOWNTREND. Fine tune fast, slow ema first(my best ema length of 1H timeframe around 7-10, 17-22). Try to eliminate fault breakout trade and use other options only necessary. Hopefully we can use automatic optimization on Pine Script soon. Don’t forget to turn off using a specific backtest date option to start your strategy.A THIS IS NOT A PERFECT (OR EVEN PROFITABLE) STRATEGY. USE AT YOUR OWN RISK AND TRADE RESPONSIBLY. DYOR DUDE.
Strategi Pine Script®
oleh fenirlix
9
The Witcher [30MIN] - AlertsHello, This is the Witcher Bot This bot is got best performance at BTCUSDTPERP BINANCE FUTURES this is bot for leverage 1x, I tried focusing at highest % profitable trades, bot could be optimalised to even higher profit net. TP: 1.1 SL: 8.2 Stop-loss unfortunelly have to be high to avoid bear/bull traps The core of this strategy is trend strenght ( MONEY FLOW INDKES) Strategy can only open position on strong price movment, to avoid wrong decision Settings are set for highest profitable trades % Bot using 10 indicators to trigger basic condtition for long and short : 1) ADX - Is one of the most powerful and accurate trend indicators. ADX measures how strong a trend is, and can give valuable information on whether there is a potential trading opportunity. 2) RSI - value helps strategy to stop trade in right time. When RSI is overbought strategy don't open new longs , also when RSI is oversold strategy don't open new shorts 3) TREND STRENGHT 4) JURIK MOVING AVERAGE - The Jurik Moving Average indicator is one of the surest ways to smoothen price curves within a minimum time lag. The indicator offers currency traders one of the best price filters during strong price moves. In this time, when bitcoin price action is so strong, this indicator is necessary. 5) SAR - The parabolic SAR is a technical indicator used to determine the price direction of an asset, as well as draw attention to when the price direction is changing. SAR supporting bot, to not open new trades when the trends are slowly changing 6) TREND INDICATOR 7) MOMENTUM - Indicator istechnical analysis tool used to determine the strength or weakness of a stock's price. Momentum measures the rate of the rise or fall of stock prices. Common momentum indicators include the relative strength index ( RSI ) and moving average convergence divergence ( MACD ). 8) OBV - On-balance volume (OBV) is a technical trading momentum indicator that uses volume flow to predict changes in stock price. 9) FAST MA - like previous ones this is for better view of trends, and correctly define the trends, also Speed_MA are using for predict the future price action. 10) RANGE FILTER - this indicator is for the better view of trends, define trends, that is important for every bull/bear traps which helps a lot becouse of the very variable trends. I decided to add momentum indicator to strategy, to make a fast-reacting decision on lower timeframes at extremly price volatility Also bot got additional EMA scalping option, which increase profit net but, in some situation, that could be risky. For max security I recommend to turn off this option. Commision are set at standard binancefutures VIP-0 = 0.04% After converting strategy into study version, bot is ready for automation. All the ploting color depends of adx value. Strategy are not Repainting For the source code I tried to keep as clean as I could Enjoy
Penunjuk Pine Script®
oleh wielkieef
18
T3 + BB TRES EMAS + BANDAS DE BOLLINGER INDICADOR 1: TRES EMAS (MEDIA MOVIL EXPONENCIAL) Con este indicador puede visualizar el promedio de precios con mayor peso a los datos mas recientes. Se calculan y dibujan tres medias móviles exponenciales: 4, 20 y 200 últimas velas. -Rápida EMA1 = 4, paso = 1 -Media EMA2 = 20, paso = 2 -Lenta EMA 3 = 200, paso = 10 INDICADOR 2: BANDAS DE BOLLINGER Con este indicador podrá ver la fuerza y la tendencia del mercado, es decir la mide la volatilidad del precio del activo. Si el precio sobrepasa la banda superior, el activo está sobrecomprado. Si el precio sobrepasa la banda inferior, el activo está sobrevendido. Longitud tendencia - BASE = 20, paso = 1 Desviación Estándar - Multiplicador = 2, paso = 0.2 Estos 2 indicadores sirven para todo tipo de activos: FOREX, CRIPTO, CFD´s, ETC. ------------------------------------------------------------------------------------------------------------------ THREE EMAS + BOLLINGER BANDS INDICATOR 1: THREE EMAS (EXPONENTIAL MOVING AVERAGE) With this indicator you can visualize the average of prices with greater weight to the most recent data. Three exponential moving averages are calculated and drawn: 4, 20 and 200 last candles. -Fast EMA1 = 4, step = 1 -Average EMA2 = 20, step = 2 -Slow EMA 3 = 200, step = 10 INDICATOR 2: BOLLINGER BANDS With this indicator you can see the strength and trend of the market, that is, it is measured by the volatility of the asset price. If the price goes above the upper band, the asset is overbought. If the price goes above the lower band, the asset is oversold. Trend length - BASE = 20, step = 1 Standard Deviation - Multiplier = 2, step = 0.2 These 2 indicators are used for all types of assets: FOREX, CRYPT, CFD's, ETC.
Penunjuk Pine Script®
oleh JCMR76
5
10X Moving Average Dingue V510X Moving Averages into 1 indicator - This is the updated V5 for PineScript 5 This moving average indicator lets you quickly visualize what is happening with the price. Color-coded for easy visualization of all 10 MAs at the same time. Fill in colors that let you see expansion and contraction between MAs and also if MAs are above or under each other plus if they are rising or falling. 10 Different Moving Averages give you full control over how you trade. You can have many long-term trends, mixed in with short-term MA. You can mix and match MA types to give a better idea of what other traders might see, important levels, etc… You can select from a wide range of MA Type: 'SMA', 'SMMA', 'EMA', 'DEMA', 'TEMA', 'WMA', 'VWMA', 'KAMA', 'FRAMA', 'TRIMA', 'ALMA', 'HMA', 'LSMA', 'ZLEMA', 'ViDYA', 'JMA', 'T3' You can select different settings for EACH MA ie. Their type, length, line size, fill or not. You can quickly ‘Override’ all MA's types by selecting an Override Type. That way you can quickly keep your settings and compare them with another type. In the same way, you can turn ON/OFF all 10xMA at the same time with one button. You can plot a moving average of all the 10x moving averages and plot just that one. 'Tool tips' explain much of the settings but if you have any questions, feel free to ask. Thank you for the feedback and check all my ‘Dingue’ indicators.
Penunjuk Pine Script®
oleh CryptoDINGUE
Median Convergence DivergenceIntroduction The Median Convergence Divergence (MCD) is a derivative of the Moving Average Convergence Divergence (MACD). The difference is the change in the use of the measure of central tendency. In MACD, moving average (mean) is used, whereas, in MCD, the median is used instead. The purpose of using the median is to eliminate the outlying values, which would be calculated for a moving average. The outliers would affect the value of the moving average. For example: 3, 5, 7, 8, 5, 4, 2, 1, 6, 21, 8. The data set average is 6.3, whereas the median value is 5. There is a difference of about 23% in the example. The reason is the outlying value '21' in the data set. As the markets are volatile, outlying values can always emerge. A moving average will consider those values; on the other hand, the median will ignore. If the strategy calls for a tool to ignore the outliers, the Median Convergence Divergence would be a great centered oscillator. The default values have changed to suit the current trading days in a week. When the MACD was introduced, there would be six trading days in a week. Therefore, it used 12 (2 weeks), 26(4 weeks), and 9 ( 1.5 weeks). But now that there are five trading days per week. The default values are adapted to them. Feel free to change them as per your wish. Recommended Settings The current settings are set to be used for the Daily Time Frame: 5 day period for the fast line, a 20 day period for the slow line, and a 10 day period for the signal line. (5 days represent a trading week, 10 days is two weeks, and 20 days is 4 weeks or a month) For the weekly charts, use 4 week period for the fast line, 13 week period for the slow line, and 8 week period for the signal line. (4 weeks represent a month, 8 weeks is two months, and 13 weeks is 3 months or quarterly) And for monthly charts, use 3 month period for the fast line, 12 month period for the slow line, and 6 month period for the signal line. (3 months is quarterly, 6 months is bi-yearly, and 12 month is yearly) It'll be challenging to measure for intraday since there are many different timeframes within intraday. The settings mentioned above should also be customized as per the requirements of the trading strategy. Strategy The strategy application is the same as the MACD, i.e., Signal Line Crossovers, Zero Line Crossovers, and Divergence. Signal Line Crossovers: When the MCD line crosses above the Signal line, it's a bullish crossover. When the MCD line crosses below the Signal line, it's a bearish crossover. Zero Line Crossovers: It's a bullish crossover when the MCD line crosses above the Zero line. When the MCD line crosses below the Zero Line, it's a bearish crossover. Divergence: When price shows a lower low, but MCD shows a higher low, it's a bullish divergence. When the price shows a higher high but MCD shows a lower high, it's a bearish divergence. Using other indicators in conjunction with the Median Convergence Divergence is recommended to take entry and exit signals.
Penunjuk Pine Script®
oleh maksumit
18
Configurable Multi MA Crossover Voting SystemThis strategy goes long when all fast moving averages that you have defined are above their counterpart slow moving averages. Long position is closed when profit or loss target is hit and at least one of the fast moving averages is below its counterpart slow moving average. The format of the config is simple. The format is : FASTxSLOW,FASTxSLOW,... Example : If you want 2 moving averages fast=9,slow=14 and fast=20,slow=50 you define it like this : 9x14,20x50 Another example : 5x10,10x15,15x20 => means 3 moving average setups : first wih fast=5/slow=10, second with fast=10/slow=15, last with fast=15/slow=20 You can chose the type of moving average : SMA, WMA, VWMA (i got issues with EMA/RMA so i removed them) You can chose the source of the moving average : high, close, hl2 etc. You can chose the period on which ATR is calculated and ATR profit/loss factors. Profit is calculated like : buy_price + atr_factor*atr Loss is calculated like : buy_price - atr_factor*atr Performance in backtest is variable depending on the timeframe, the options and the market. Performance in backtest suggests it works better for higher timeframes like 1d, 4h etc. Disclaimer Please remember that past performance may not be indicative of future results. Due to various factors, including changing market conditions, the strategy may no longer perform as well as in historical backtesting. This post and the script don’t provide any financial advice.
Strategi Pine Script®
oleh levieux
[BM] SSS 50% Rule EvaluatorSara Strat Sniper 50% Rule Evaluator █  OVERVIEW This indicator is based on Sara Strat Sniper's - 50% Rule for trading Outside Bars and helps you to evaluate the historical success rate of that rule. █  FEATURES Calculation • You can choose to evaluate only the current bar to see if it forms an outside bar (success) or not (fail), but you can also choose to include the next bar to see if that one forms a compound outside bar. • You can enable a start and/or end date to limit the calculation period. Table • Show or hide the table with the calculation results. • Show or hide the calculation details (up/down data). • Position of the table, opacity, cell width and text size can be customized. Colors • Table colors can be customized. • You can choose to show the inside/outside bars in customizable bar colors. • You can choose to identify successful/failed/recovered outside bars in customizable background colors. █  LIMITATIONS • This script uses a special characteristic of the `security()` function allowing the inspection of intrabars — which is not officially supported by TradingView. • Intrabar inspection only works on some chart timeframes: 5, 10, 15, 30, 45 and 195 minutes, 1, 2, 3, 4, 5, 6, 7 and 8 hours, 1, 2, 3, 4 and 5 days, 1, 2, 3 and 4 weeks, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 and 12 months. The script’s code can be modified to run on other resolutions. • There is a limit to how far back intrabar calculations can be performed, and is dependant on both the intrabar resolution and your subscription (which determines the number of available bars).
Penunjuk Pine Script®
oleh bmistiaen
9
Add Volume of Multiple SecuritiesThis tool can be used in so many ways but the most common use is adding the volume of multiple securities (Up to 39) This is especially helpful when analyzing cryptocurrency/fiat pairs. The user can create their own custom index; a combination of any symbols they'd like. It's also nice to see different combinations of volume when dealing with other markets; Like gold as an example - it would be nice to see different combinations of futures volume or ETF volume layered OR added together in different ways. There is an option to enable the use of the symbol - you can create a long list of useable symbols, then click through, enabling & disabling different combinations of securities; helps the user find what works best for their methodology. There is an option to "divbyclose" or "Divide the volume by the closing price"... You'll notice some exchanges price their volume in USD rather than in number of shares. This option will divide the amount of volume by the closing price - effectively converts volume priced in USD into volume priced in "shares". There is also a ratio option - once you have your index setup, you can multiply the total volume by any number, for any reason you would like. In the shared chart example, I am multiplying the total by 0.1, bringing the volume down one power of 10 so that I can compare my custom index, geometrically, to the index created by Tradingview. Layered on top of each other, I see some important differences in their shape and relative magnitude when large fluctuations occur. I am also comparing those levels of volume with levels of price above (within the horizontal price structures shown). The script can be VERY slow when you have added many securities together so be patient with it once you get about 5-10 securities added together.
Penunjuk Pine Script®
oleh joe.dodaro