Mulakan

Cari dalam skrip untuk "机械革命无界15+时不时闪屏"

GoTiT|Simple Auto Fib v1.0Simple Auto Fib! Notes: 1. Always set the trend manually! Don't rely on the auto trend detection. 2. The first parameter Length sets the number of candles back (left) to search for highs and lows from the current candle. 3. The High Offset parameter sets the number of candles back (left) to ignore/skip before searching for highs. 4. The Low Offset parameter sets the number of candles back (left) to ignore/skip before searching for lows. 5. The offset parameters change the behavior of the Length parameter. Example 1: Length = 100 High Offset = 0 Low Offset = 0 This is the default behavior, and the search for highs and lows occurs on the last 100 candles. Example 2: Length = 50 High Offset = 20 (Ignore the last 20 candles, and search for highs starting at candle 21 to 71 (or 50 candles back) Low Offset = 15 (Ignore the last 15 candles, and search for lows starting at candle 16 to 66 (or 50 candles back) In example 2, search starts on candle 21 for highs, and candle 16 for lows and extends 50 candles further back from there. 6. The Trend Detection parameter sets the number of candles back (left) to use in the trend calculations. Larger values give better "marco trend" detection. Smaller values give better "micro trend" detection. See note #1. 7. The white fib line is fib0. Assuming you correctly set the trend manually (or the trend is auto detected correctly), in a downtrend fib0 should be bellow the red fib line, and in an uptrend fib0 should be above the red fib line.
Penunjuk Pine Script®
oleh gotit
Fractal Resonance BarLazyBear's WaveTrend port has been praised for highlighting trend reversals with precision and punctuality (minimal lag). But strong "3rd Wave" trends can "embed" or saturate any oscillator flashing several premature crosses while stuck overbought/oversold. This happens when the trend stretches over a longer timescale than the oscillator's averaging window or filter time constant. Our solution: monitor many timescales. With Fractal Resonance Bar's rich color codings, strong wavefronts form across timescales and jump out like an approaching line of thunderclouds! Fractal Resonance Bar color-codes the status of eight underlying stochastic oscillators, with each row averaging over twice the time of the row above. Fractal Resonance Bar shifts its timescales along with your choice of main chart timescale: 1 minute chart: 1 minute through 128 minute (~2 hour) oscillators. 15 minute chart: 15 minute through 1920 minute (~32 hour) oscillators. 1 hour chart: 1 hour through 128 hour (~2 week) oscillators. Daily chart: 1 day through 128 day (~4 month) oscillators. The color map is configured as follows: Hot Pink: Extreme Overbought (> 100%) rolled over to sell, but oscillators probably embedded with more upside (revert to Dark Green) possible after a pause. Deep Red: Overbought (> 75%) crossover ripe for selling (validated when red spreads to timescales below). Brown: Minor (< 75%) crossover sell from which could bounce back green or start a plunge toward gray/black. Gray/Black: Mature (< -75%) sells turning full black in a plunge before the dawn. Lime Green: Extreme Oversold (< -100%) and bouncing, though may yet bottom even lower. Green: Oversold (< -75%) crossover ripe for buy. Green spreading to all timescales below will validate bottom is in. Dark Green/Teal: Mature buy in overbought (> 75%) range, waiting for sell crossover to Hot Pink for a pause or correction. White Stripes are Impulsive Trend Warning Fractal Resonance Bar warns of oscillator embedding by showing white stripes when it detects strong, early surges in the timescale rows below.The white stripes usually accompany Hot Pink warning it's too early to go short, or Lime Green warning it's too early to go long. Heeding these warnings will probably miss the exact top or bottom, but you're less likely to get overrun in a momentum move. Usually the market gives us a second opportunity to short very close to the top or buy very close to the bottom after the warning white stripes have subsided. NOTE: Recently rolled over Futures contracts may not have enough history for all oscillator calculations, in which case no bar colors will appear. Tweakable Attributes The default Channel Length, Stochastic Ratio Length and Lag Length work reasonably well on all timescales in our experience. Minor tweaks don't hurt but this may just overfit to a particular chart history. We don't recommend changing the 75% Overbought and 100% Extreme Overbought default levels as these are ideal numbers relative to the underlying oscillator statistic calculations. But these settings can shift the color transition levels. Embedded attribute controls the sensitivity/conservativeness of the white strip embedding detectors. Closer to 75 increases the warning sensitivity while closer to 100 decreases the aggressiveness of blocking white stripes. Embed Separation also affects the white stripe sensitivity. Row width increases each row's thickness to fill the available screen height you've afforded the bar.
Penunjuk Pine Script®
oleh pythagoras
12
extended session - Regular Opening-Range- JayyOpening Range and some other scripts updated to plot correctly (see comments below.) There are three variations of the fibonacci expansion beyond the opening range and retracements within the opening range of the US Market session - I have not put in the script for the other markets yet. The three scripts have different uses and strengths: The extended session script (with the script here below) will plot the opening range whether you are using the extended session or the regular session. (that is to say whether "ext" in the lower right hand corner is highlighted or not.). While in the extended session the opening range has some plotting issues with periods like 13 minutes or any period that is not divisible into 330 mins with a round number outcome (eg 330/60 =5.5. Therefore an hour long opening range has problems in the extended session. The pre session script is only for the premarket. You can select any opening range period you like. I have set the opening range to be the full premarket session. If you select a different session you will have to unselect "pre open to 9:30 EST for Opening Range?" in the format section. The script defaults to 15 minutes in the "period Of Pre Opening Range?". To go back to the 4 am to 9:30 pre opening range select "pre open to 9:30 EST for Opening Range?" there is no automatic 330 minute selection. The past days offset script only works in 5 min or 15 minute period. It will show the opening range from up to 20 days past over the current days price action. Use this for the regular session only. 0 shows the current day's opening range. Use the positive integers for number of days back ie 1, 2, 3 etc not -1, -2, -3 etc. The script is preprogrammed to use the current day (0). Scripts updated to plot correctly: One thing they all have in common is a way of they deal with a somewhat random problem that shifts the plots 4 hours in one direction or the other ie the plot started at 9:30 EST or 1:30PM EST. This issue started to occur approximately June 22, 2015 and impacts any script that tried to use "session" times to manage a plot in my scripts. The issue now seems to have been resolved during this past week. Just in case the problem reoccurs I have added a "Switch session plot?" to each script. If the plot looks funny check or uncheck the "Switch session plot?" and see the difference. Of course if a new issue crops up it will likely require a different fix. I have updated all of the scripts shown on this chart. If you are using a script of mine that suffers from the compiler issue then you will find an update on this chart. You can get any and all of the scripts by clicking on the small sideways wishbone on the left middle of the chart. You will see a dialogue box. Then click "make it mine". This will import all of the scripts to your computer and you can play around with them all to decide what you want and what you don't want. This is the easiest way to get all of the scripts in one fell swoop. It is also the easiest way for me to make all of the scripts available. I do not have all of the plots visible since it is too messy and one of the scripts (pre OR) is only for the regular session. To view the scripts click on the blue eye to the right of the script title to show it on this script. If you can only use the regular session. The scripts will all (with the exception of the pre OR) work fine. If for any reason this script seems flakey refresh the page r try a slightly different period. I have noticed that sometimes randomly the script loves to return to the 5 min OR. This is a very new issue transient issue. As always if you see an issue please let me know. Cheers Jayy
Penunjuk Pine Script®
oleh jayy
1
BB 100 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 25 with Barcolors".
Penunjuk Pine Script®
oleh rmwaddelljr
BB 25 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 100 with Barcolors".
Penunjuk Pine Script®
oleh rmwaddelljr
1
KK_Intraday MAsHey guys, today I was browsing through intraday Charts looking at some moving averages. Basically what I wanted to see was whether the currency pair was trading below or above the moving average of the day/week/month. For a better understanding: The daily MA on a 15 minute Forex Chart would be the 96 MA. I encountered the problem that i always had to change the settings for my MAs when changing the Time Interval, so I coded this here up. It is pretty simple but maybe somebody else has the same problem and can put it to use. The script has some settings as listed below: Choice which MAs to plot, (Daily, Weekly, Monthly) Choice which type of MA to use (Simple, Exponential, Weighted) Neccesary Settings for the correct calculation (e.g. Number of trading hours per day). These settings depend on the instrument you are using and should always be checked before using this script. There are a few things to Note when using this script: This script works for intraday charts only. The monthly MA doesn't work on any Time Interval smaller than 15 minutes. Can't do anything about it unfortunately. This is my first published Script, use it with caution and let me know what you think about it!
Penunjuk Pine Script®
oleh Kurbelklaus
2
Opening Range Breakout with 2 Profit Targets.Opening Range Breakout with 2 Profit Targets. Updated Indicator now works on all Symbols with Many Different Session Options. ***Known PineScript Issue…While the Opening Range is being Formed the lines only adjust for that individual bar. Just reset Indicator after Opening Range Completes. ***All Times are Based on New York Time Session Options Forex U.S. Banks Open (8:00), Gold U.S. Open (8:20), Oil U.S. Open (9:00), U.S. Cash Session - Stocks (9:30), NY Forex Open (17:00) , Europe Open (02:00), or if you choose Setting 0 the Session Runs from 00:00 to 00:00 (Midnight to Midnight). ***Ability to use 60 minute Opening Range, 30 minute, 15 minute, and many other options. ***However you can manually change the times in the Inputs Tab to adjust for any session you prefer. This is useful for Day Light Savings Adjustments. Also the default times work if your charts are set to EST Time. If you use A different time zone in your settings you need to Adjust the times in the inputs tab. Initially Opening Range High and Low plot as Yellow Lines. If Price Goes Above Opening Range then Line Turns Green. If Price Goes Below Opening Range Line Turns Red. By default the First Profit Target is 1/2 the Width of the Opening Range and the 2nd Profit Target is 1 Times the Opening Range. However these are Adjustable in the Inputs Tab. By Default the Opening Range Length is 1 Hour. However, you can Change the Opening Range Length to 15 min, 30 min, 2 hours etc. in the Inputs Tab. Plots a 1 Above or Below Candle when 1st Profit Target is Achieved, and a 2 when 2nd Profit Target is Achieved.
Penunjuk Pine Script®
oleh ChrisMoody
91
Indicator: Trend Trigger FactorIntroduced by M.H.Pee, Trend Trigger Factor is designed to keep the trader trading with the trend. System rules according to the developer: * If the 15-day TTF is above 100 (indicating an uptrend), you will want to be in long positions. * If the 15-day TTF is below -100, you will want to be short. * If it is between -100 and 100, you should remain with the current position. More info: Original Article by Mr.Pee: drive.google.com
Penunjuk Pine Script®
oleh LazyBear
15
TLP Swing Chart V2// This source code is subject to the terms of the Mozilla Public License 2.0 at mozilla.org // Sửa đổi trên code gốc của © meomeo105 // © meomeo105 //@version=5 indicator('TLP Swing Chart V2', shorttitle='TLP Swing V2', overlay=true, max_lines_count=500) //-----Input------- customTF = input.timeframe(defval="",title = "Show Other TimeFrame") showTLP = input.bool(false, 'Show TLP', inline = "TLP1") colorTLP = input.color(color.aqua, '', inline = "TLP1") showSTLP = input.bool(true, 'Show TLP Swing', inline = "Swing1") colorSTLP = input.color(color.aqua, '', inline = "Swing1") showLabel = input.bool(true, 'Show Label TimeFrame') lineSTLP = input.string(title="",options= ,defval="(─)", inline = "Swing1") lineStyleSTLP = lineSTLP == "(┈)" ? line.style_dotted : lineSTLP == "(╌)" ? line.style_dashed : line.style_solid //IOSB IOSB = "TLPInOutSideBarSetting" ISB = input(true,group =IOSB, title="showISB") colorISB = input.color(color.rgb(250, 171, 0), inline = "ISB") OSB = input(true,group =IOSB, title="showOSB") colorOSB = input.color(color.rgb(56, 219, 255), inline = "OSB") ZoneColor = input(defval = color.new(color.orange, 90),group =IOSB, title = "Background Color") BorderColor = input(defval = color.new(color.orange, 100),group =IOSB, title = "Border Color") ///////////////// var aCZ = array.new_float(0) float highest = high float lowest = low if (array.size(aCZ) > 0) highest := array.get(aCZ, 0) lowest := array.get(aCZ, 1) insideBarCondtion = low >= lowest and low <= highest and high >= lowest and high <= highest if ( insideBarCondtion == true ) array.push(aCZ, high ) array.push(aCZ, low ) if( array.size(aCZ) >= 2 and insideBarCondtion == false ) float maxCZ = array.max(aCZ) float minCZ = array.min(aCZ) box.new(bar_index - (array.size(aCZ) / 2) - 1, maxCZ, bar_index - 1, minCZ, bgcolor = ZoneColor, border_color = BorderColor) array.clear(aCZ) //////////////////////////Global////////////////////////// var arrayLineTemp = array.new_line() // Funtion f_resInMinutes() => _resInMinutes = timeframe.multiplier * ( timeframe.isseconds ? 1. / 60. : timeframe.isminutes ? 1. : timeframe.isdaily ? 1440. : timeframe.isweekly ? 10080. : timeframe.ismonthly ? 43800. : na) // Converts a resolution expressed in minutes into a string usable by "security()" f_resFromMinutes(_minutes) => _minutes < 1 ? str.tostring(math.round(_minutes*60)) + "S" : _minutes < 60 ? str.tostring(math.round(_minutes)) + "m" : _minutes < 1440 ? str.tostring(math.round(_minutes/60)) + "H" : _minutes < 10080 ? str.tostring(math.round(math.min(_minutes / 1440, 7))) + "D" : _minutes < 43800 ? str.tostring(math.round(math.min(_minutes / 10080, 4))) + "W" : str.tostring(math.round(math.min(_minutes / 43800, 12))) + "M" f_tfRes(_res,_exp) => request.security(syminfo.tickerid,_res,_exp,lookahead=barmerge.lookahead_on) var label labelError = label.new(bar_index, high, text = "", color = #00000000, textcolor = color.white,textalign = text.align_left) sendError(_mmessage) => label.set_xy(labelError, bar_index + 3, close ) label.set_text(labelError, _mmessage) var arrayLineChoCh = array.new_line() var label labelTF = label.new(time, close, text = "",color = color.new(showSTLP ? colorSTLP : colorTLP,95), textcolor = showSTLP ? colorSTLP : colorTLP,xloc = xloc.bar_time, textalign = text.align_left) //////////////////////////TLP////////////////////////// var arrayXTLP = array.new_int(5,time) var arrayYTLP = array.new_float(5,close) var arrayLineTLP = array.new_line() int drawLineTLP = 0 _high = high _low = low _close = close _open = open if(customTF != timeframe.period) _high := f_tfRes(customTF,high) _low := f_tfRes(customTF,low) _close := f_tfRes(customTF,close) _open := f_tfRes(customTF,open) highPrev = _high lowPrev = _low // drawLineTLP => 2:Tiếp tục 1:Đảo chiều; // Outsidebar 2:Tiếp tục 3:Tiếp tục và Đảo chiều 4 : Đảo chiều 2 lần drawLineTLP := 0 if(_high > highPrev and _low > lowPrev ) if(array.get(arrayYTLP,0) > array.get(arrayYTLP,1)) if(_high <= high) array.set(arrayXTLP, 0, time) array.set(arrayYTLP, 0, _high ) drawLineTLP := 2 else array.unshift(arrayXTLP,time) array.unshift(arrayYTLP,_high ) drawLineTLP := 1 else if(_high < highPrev and _low < lowPrev ) if(array.get(arrayYTLP,0) > array.get(arrayYTLP,1)) array.unshift(arrayXTLP,time) array.unshift(arrayYTLP,_low ) drawLineTLP := 1 else if(_low >= low) array.set(arrayXTLP, 0, time) array.set(arrayYTLP, 0, _low ) drawLineTLP := 2 else if(_high >= highPrev and _low < lowPrev or _high > highPrev and _low <= lowPrev ) if(array.get(arrayYTLP,0) > array.get(arrayYTLP,1)) if(_high >= array.get(arrayYTLP,0) and array.get(arrayYTLP,1) < _low ) if(_high <= high) array.set(arrayXTLP, 0, time) array.set(arrayYTLP, 0, _high ) drawLineTLP := 2 else if(_high >= array.get(arrayYTLP,0) and array.get(arrayYTLP,1) > _low ) if(_close < _open) if(_high <= high) array.set(arrayXTLP, 0, time) array.set(arrayYTLP, 0, _high ) array.unshift(arrayXTLP,time) array.unshift(arrayYTLP,_low ) drawLineTLP := 3 else array.unshift(arrayXTLP,time) array.unshift(arrayYTLP,_low ) array.unshift(arrayXTLP,time) array.unshift(arrayYTLP,_high ) drawLineTLP := 4 else if(array.get(arrayYTLP,0) < array.get(arrayYTLP,1)) if(_low <= array.get(arrayYTLP,0) and _high < array.get(arrayYTLP,1)) if(_low >= low) array.set(arrayXTLP, 0, time) array.set(arrayYTLP, 0, _low ) drawLineTLP := 2 else if(_low <= array.get(arrayYTLP,0) and _high > array.get(arrayYTLP,1)) if(_close > _open) if(_low >= low) array.set(arrayXTLP, 0, time) array.set(arrayYTLP, 0, _low ) array.unshift(arrayXTLP,time) array.unshift(arrayYTLP,_high ) drawLineTLP := 3 else array.unshift(arrayXTLP,time) array.unshift(arrayYTLP,_high ) array.unshift(arrayXTLP,time) array.unshift(arrayYTLP,_low ) drawLineTLP := 4 else if((_high <= highPrev and _low >= lowPrev )) highPrev := highPrev lowPrev := lowPrev if(f_resInMinutes() < f_tfRes(customTF,f_resInMinutes()) and drawLineTLP == 0) if(array.get(arrayYTLP,0) > array.get(arrayYTLP,1)) if(array.get(arrayYTLP,0) <= high) array.set(arrayXTLP, 0, time) drawLineTLP := 2 else if(array.get(arrayYTLP,0) >= low) array.set(arrayXTLP, 0, time) drawLineTLP := 2 if((showSTLP or showTLP) and f_resInMinutes() <= f_tfRes(customTF,f_resInMinutes())) if(drawLineTLP == 2) if(array.size(arrayLineTLP) >0) line.set_xy2(array.get(arrayLineTLP,0),array.get(arrayXTLP,0),array.get(arrayYTLP,0)) else array.unshift(arrayLineTLP,line.new(array.get(arrayXTLP,1),array.get(arrayYTLP,1),array.get(arrayXTLP,0),array.get(arrayYTLP,0), color = colorTLP,xloc = xloc.bar_time, style = lineStyleSTLP)) else if(drawLineTLP == 1) array.unshift(arrayLineTLP,line.new(array.get(arrayXTLP,1),array.get(arrayYTLP,1),array.get(arrayXTLP,0),array.get(arrayYTLP,0), color = colorTLP,xloc = xloc.bar_time, style = lineStyleSTLP)) else if(drawLineTLP == 3) if(array.size(arrayLineTLP) >0) line.set_xy2(array.get(arrayLineTLP,0),array.get(arrayXTLP,1),array.get(arrayYTLP,1)) else array.unshift(arrayLineTLP,line.new(array.get(arrayXTLP,2),array.get(arrayYTLP,2),array.get(arrayXTLP,1),array.get(arrayYTLP,1), color = colorTLP,xloc = xloc.bar_time, style = lineStyleSTLP)) array.unshift(arrayLineTLP,line.new(array.get(arrayXTLP,1),array.get(arrayYTLP,1),array.get(arrayXTLP,0),array.get(arrayYTLP,0), color = colorTLP,xloc = xloc.bar_time, style = lineStyleSTLP)) else if(drawLineTLP == 4) array.unshift(arrayLineTLP,line.new(array.get(arrayXTLP,2),array.get(arrayYTLP,2),array.get(arrayXTLP,1),array.get(arrayYTLP,1), color = colorTLP,xloc = xloc.bar_time, style = lineStyleSTLP)) array.unshift(arrayLineTLP,line.new(array.get(arrayXTLP,1),array.get(arrayYTLP,1),array.get(arrayXTLP,0),array.get(arrayYTLP,0), color = colorTLP,xloc = xloc.bar_time, style = lineStyleSTLP)) //////////////////////////Swing TLP////////////////////////// var arrayXSTLP = array.new_int(5,time) var arrayYSTLP = array.new_float(5,close) var arrayLineSTLP = array.new_line() int drawLineSTLP = 0 int drawLineSTLP1 = 0 if(showSTLP) if(math.max(array.get(arrayYSTLP,0),array.get(arrayYSTLP,1)) < math.min(array.get(arrayYTLP,0),array.get(arrayYTLP,1)) or math.min(array.get(arrayYSTLP,0),array.get(arrayYSTLP,1)) > math.max(array.get(arrayYTLP,0),array.get(arrayYTLP,1))) //Khởi tạo bắt đầu drawLineSTLP1 := 5 array.set(arrayXSTLP, 0, array.get(arrayXTLP,1)) array.set(arrayYSTLP, 0, array.get(arrayYTLP,1)) array.unshift(arrayXSTLP,array.get(arrayXTLP,0)) array.unshift(arrayYSTLP,array.get(arrayYTLP,0)) // drawLineSTLP kiểm tra điểm 1 => 13:Tiếp tục có sóng hồi // 12|19(reDraw):Tiếp tục không có sóng hồi // 14:Đảo chiều if(array.get(arrayXTLP,0) == array.get(arrayXTLP,1)) if(array.get(arrayXSTLP,0) >= array.get(arrayXTLP,2) and array.get(arrayYSTLP,0) != array.get(arrayYTLP,1) and ((array.get(arrayYTLP,1) > array.get(arrayYTLP,2) and array.get(arrayYSTLP,0) > array.get(arrayYSTLP,1)) or (array.get(arrayYTLP,1) < array.get(arrayYTLP,2) and array.get(arrayYSTLP,0) < array.get(arrayYSTLP,1)))) drawLineSTLP1 := 12 array.set(arrayXSTLP, 0, array.get(arrayXTLP,1)) array.set(arrayYSTLP, 0, array.get(arrayYTLP,1)) else if(array.get(arrayXSTLP,0) <= array.get(arrayXTLP,2)) if((array.get(arrayYSTLP,0) > array.get(arrayYSTLP,1) and array.get(arrayYTLP,1) < array.get(arrayYSTLP,1)) or (array.get(arrayYSTLP,0) < array.get(arrayYSTLP,1) and array.get(arrayYTLP,1) > array.get(arrayYSTLP,1))) drawLineSTLP1 := 14 array.unshift(arrayXSTLP,array.get(arrayXTLP,1)) array.unshift(arrayYSTLP,array.get(arrayYTLP,1)) else if((array.get(arrayYSTLP,0) > array.get(arrayYSTLP,1) and array.get(arrayYTLP,1) > array.get(arrayYSTLP,0)) or (array.get(arrayYSTLP,0) < array.get(arrayYSTLP,1) and array.get(arrayYTLP,1) < array.get(arrayYSTLP,0))) drawLineSTLP1 := 13 _max = math.min(array.get(arrayYSTLP,0),array.get(arrayYSTLP,1)) _min = math.max(array.get(arrayYSTLP,0),array.get(arrayYSTLP,1)) _max_idx = 0 _min_idx = 0 for i = 2 to array.size(arrayXTLP) if(array.get(arrayXSTLP,0) >= array.get(arrayXTLP,i)) break if(_min > array.get(arrayYTLP,i)) _min := array.get(arrayYTLP,i) _min_idx := array.get(arrayXTLP,i) if(_max < array.get(arrayYTLP,i)) _max := array.get(arrayYTLP,i) _max_idx := array.get(arrayXTLP,i) if(array.get(arrayYSTLP,0) > array.get(arrayYSTLP,1)) array.unshift(arrayXSTLP,_min_idx) array.unshift(arrayYSTLP,_min) else if(array.get(arrayYSTLP,0) < array.get(arrayYSTLP,1)) array.unshift(arrayXSTLP,_max_idx) array.unshift(arrayYSTLP,_max) array.unshift(arrayXSTLP,array.get(arrayXTLP,1)) array.unshift(arrayYSTLP,array.get(arrayYTLP,1)) if(f_resInMinutes() < f_tfRes(customTF,f_resInMinutes())) if(array.get(arrayYSTLP,0) == array.get(arrayYTLP,1) and array.get(arrayXSTLP,0) != array.get(arrayXTLP,1)) array.set(arrayXSTLP, 0, array.get(arrayXTLP,1)) drawLineSTLP1 := 19 if(f_resInMinutes() <= f_tfRes(customTF,f_resInMinutes())) if(drawLineSTLP1 == 12 or drawLineSTLP1 == 19) if(array.size(arrayLineSTLP) >0) line.set_xy2(array.get(arrayLineSTLP,0),array.get(arrayXSTLP,0),array.get(arrayYSTLP,0)) else array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,1),array.get(arrayYSTLP,1),array.get(arrayXSTLP,0),array.get(arrayYSTLP,0), color = colorSTLP,xloc = xloc.bar_time)) else if(drawLineSTLP1 == 14) array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,1),array.get(arrayYSTLP,1),array.get(arrayXSTLP,0),array.get(arrayYSTLP,0), color = colorSTLP,xloc = xloc.bar_time)) else if(drawLineSTLP1 == 13) array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,2),array.get(arrayYSTLP,2),array.get(arrayXSTLP,1),array.get(arrayYSTLP,1), color = colorSTLP,xloc = xloc.bar_time)) array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,1),array.get(arrayYSTLP,1),array.get(arrayXSTLP,0),array.get(arrayYSTLP,0), color = colorSTLP,xloc = xloc.bar_time)) else if(drawLineSTLP1 == 15) if(array.size(arrayLineSTLP) >0) line.set_xy2(array.get(arrayLineSTLP,0),array.get(arrayXSTLP,1),array.get(arrayYSTLP,1)) else array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,2),array.get(arrayYSTLP,2),array.get(arrayXSTLP,1),array.get(arrayYSTLP,1), color = colorSTLP,xloc = xloc.bar_time)) array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,1),array.get(arrayYSTLP,1),array.get(arrayXSTLP,0),array.get(arrayYSTLP,0), color = colorSTLP,xloc = xloc.bar_time)) // drawLineSTLP kiểm tra điểm 0 => 3:Tiếp tục có sóng hồi // 2|9(reDraw):Tiếp tục không có sóng hồi // 4:Đảo chiều if(array.get(arrayXSTLP,0) >= array.get(arrayXTLP,1) and array.get(arrayYSTLP,0) != array.get(arrayYTLP,0) and ((array.get(arrayYTLP,0) > array.get(arrayYTLP,1) and array.get(arrayYSTLP,0) > array.get(arrayYSTLP,1)) or (array.get(arrayYTLP,0) < array.get(arrayYTLP,1) and array.get(arrayYSTLP,0) < array.get(arrayYSTLP,1)))) drawLineSTLP := 2 array.set(arrayXSTLP, 0, array.get(arrayXTLP,0)) array.set(arrayYSTLP, 0, array.get(arrayYTLP,0)) else if(array.get(arrayXSTLP,0) <= array.get(arrayXTLP,1)) if((array.get(arrayYSTLP,0) > array.get(arrayYSTLP,1) and array.get(arrayYTLP,0) < array.get(arrayYSTLP,1)) or (array.get(arrayYSTLP,0) < array.get(arrayYSTLP,1) and array.get(arrayYTLP,0) > array.get(arrayYSTLP,1))) drawLineSTLP := 4 array.unshift(arrayXSTLP,array.get(arrayXTLP,0)) array.unshift(arrayYSTLP,array.get(arrayYTLP,0)) else if((array.get(arrayYSTLP,0) > array.get(arrayYSTLP,1) and array.get(arrayYTLP,0) > array.get(arrayYSTLP,0)) or (array.get(arrayYSTLP,0) < array.get(arrayYSTLP,1) and array.get(arrayYTLP,0) < array.get(arrayYSTLP,0))) drawLineSTLP := 3 _max = math.min(array.get(arrayYSTLP,0),array.get(arrayYSTLP,1)) _min = math.max(array.get(arrayYSTLP,0),array.get(arrayYSTLP,1)) _max_idx = 0 _min_idx = 0 for i = 1 to array.size(arrayXTLP) if(array.get(arrayXSTLP,0) >= array.get(arrayXTLP,i)) break if(_min > array.get(arrayYTLP,i)) _min := array.get(arrayYTLP,i) _min_idx := array.get(arrayXTLP,i) if(_max < array.get(arrayYTLP,i)) _max := array.get(arrayYTLP,i) _max_idx := array.get(arrayXTLP,i) if(array.get(arrayYSTLP,0) > array.get(arrayYSTLP,1)) array.unshift(arrayXSTLP,_min_idx) array.unshift(arrayYSTLP,_min) else if(array.get(arrayYSTLP,0) < array.get(arrayYSTLP,1)) array.unshift(arrayXSTLP,_max_idx) array.unshift(arrayYSTLP,_max) array.unshift(arrayXSTLP,array.get(arrayXTLP,0)) array.unshift(arrayYSTLP,array.get(arrayYTLP,0)) if(f_resInMinutes() < f_tfRes(customTF,f_resInMinutes())) if(array.get(arrayYSTLP,0) == array.get(arrayYTLP,0) and array.get(arrayXSTLP,0) != array.get(arrayXTLP,0)) array.set(arrayXSTLP, 0, array.get(arrayXTLP,0)) drawLineSTLP := 9 if(f_resInMinutes() <= f_tfRes(customTF,f_resInMinutes())) if(drawLineSTLP == 2 or drawLineSTLP == 9) if(array.size(arrayLineSTLP) >0) line.set_xy2(array.get(arrayLineSTLP,0),array.get(arrayXSTLP,0),array.get(arrayYSTLP,0)) else array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,1),array.get(arrayYSTLP,1),array.get(arrayXSTLP,0),array.get(arrayYSTLP,0), color = colorSTLP,xloc = xloc.bar_time)) else if(drawLineSTLP == 4) array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,1),array.get(arrayYSTLP,1),array.get(arrayXSTLP,0),array.get(arrayYSTLP,0), color = colorSTLP,xloc = xloc.bar_time)) else if(drawLineSTLP == 3) array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,2),array.get(arrayYSTLP,2),array.get(arrayXSTLP,1),array.get(arrayYSTLP,1), color = colorSTLP,xloc = xloc.bar_time)) array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,1),array.get(arrayYSTLP,1),array.get(arrayXSTLP,0),array.get(arrayYSTLP,0), color = colorSTLP,xloc = xloc.bar_time)) else if(drawLineSTLP == 5) if(array.size(arrayLineSTLP) >0) line.set_xy2(array.get(arrayLineSTLP,0),array.get(arrayXSTLP,1),array.get(arrayYSTLP,1)) else array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,2),array.get(arrayYSTLP,2),array.get(arrayXSTLP,1),array.get(arrayYSTLP,1), color = colorSTLP,xloc = xloc.bar_time)) array.unshift(arrayLineSTLP,line.new(array.get(arrayXSTLP,1),array.get(arrayYSTLP,1),array.get(arrayXSTLP,0),array.get(arrayYSTLP,0), color = colorSTLP,xloc = xloc.bar_time)) ///////////////////////Other////////////////////////////////// if(f_resInMinutes() <= f_tfRes(customTF,f_resInMinutes())) if(showSTLP) if(showLabel and (barstate.islast or barstate.islastconfirmedhistory)) texLabel = f_resInMinutes() == f_tfRes(customTF,f_resInMinutes()) ? f_resFromMinutes(f_resInMinutes()) : f_resFromMinutes(f_tfRes(customTF,f_resInMinutes())) label.set_xy(labelTF,array.get(arrayXSTLP,0),array.get(arrayYSTLP,0)) label.set_text(labelTF,texLabel) label.set_style(labelTF,array.get(arrayYSTLP,0) < array.get(arrayYSTLP,1) ? label.style_label_upper_right : label.style_label_lower_right) if(not showTLP) arrayLineTemp := array.copy(arrayLineTLP) for itemArray in arrayLineTemp if(line.get_x1(itemArray) < array.get(arrayXSTLP,0)) line.delete(itemArray) array.remove(arrayLineTLP,array.indexof(arrayLineTLP, itemArray)) //Inside Bars - Outside Bars insideBar() => ISB and high <= high and low >= low ? 1 : 0 outsideBar() => OSB and (high > high and low < low ) ? 1 : 0 //Inside and Outside Bars barcolor(insideBar() ? color.new(colorISB,0) : na ) barcolor(outsideBar() ? color.new(colorOSB,0) : na )
Penunjuk Pine Script®
oleh waersmdurgadgfk
BB Simple B-Xtrender Long### Overview I currently us this on a 1 week timeframe to spot trend shifts in the market. It focuses exclusively on long positions (buying assets expecting price increases) and does not overlay on the main price chart—instead, it appears in a separate pane. The strategy allocates the full available equity to each trade and accounts for commissions as a percentage. It uses a custom indicator called the "B-Xtrender" to generate entry and exit signals for long trades, based on momentum-like calculations involving exponential moving averages (EMAs) and the relative strength index (RSI). The indicator is computed on a user-specified timeframe, and the strategy includes alert conditions for key events. ### Inputs Section The script begins with user-configurable inputs that allow customization without editing the code directly. These include: - Three integer values for short-term lengths: The first (default 5) and second (default 20) are used in EMA calculations to create a difference that forms the basis of the indicator. The third (default 15) sets the length for the RSI applied to that difference. - A timeframe input (default "30" for 30 minutes) that determines the resolution for fetching data used in the indicator. - A float value for the exit level (default 5, with a minimum of 0 and step of 0.1), which acts as a threshold for one of the exit conditions—specifically, when the indicator crosses below this level. These inputs make the strategy adaptable to different assets or timeframes by adjusting the sensitivity of the indicator and exit rules. ### Indicator Section The core of the script is the calculation of the "ShortTermXtrender" indicator. It fetches data from the specified timeframe using the asset's ticker symbol and computes an RSI on the difference between two EMAs of the closing prices (using the first and second short lengths), then subtracts 50 to center it around zero. This results in an oscillator that highlights short-term momentum shifts. The histogram is colored dynamically: - Green shades for positive values: Brighter green if the current value is higher than the previous (indicating strengthening upward momentum), and darker green otherwise. - Red shades for negative or zero values: Brighter red if the current value is higher than the previous (less negative, but still downward), and darker red if it's decreasing further. The indicator is plotted as columns for visual clarity, titled "B-Xtrender TF1" (referring to the first timeframe). A dashed gray horizontal line at zero serves as a centerline to easily distinguish positive (bullish) from negative (bearish) territories. ### Conditions Section This part defines the logic for entering and exiting long trades, broken into entry and exit rules. For long entries: - One condition checks if the indicator is increasing (current value greater than the previous). - Another optional condition detects a crossover above zero while also increasing, which can be removed if not desired. - The final entry signal combines these: It triggers on either the crossover (if included) or the increasing value, promoting entries during upward momentum. For long exits: - A "red" state is defined as the indicator being at or below zero. - A decreasing trend over two bars is checked by comparing the current to the previous, and the previous to the one before that. - One exit triggers on this red state combined with the two-bar decrease. - Another exit occurs when the indicator crosses below the user-defined exit level. - The overall exit combines these two, ensuring positions close on weakening momentum or threshold breaches, but only if a long position is active. ### Strategy Execution Section Here, the script applies the conditions to actual trading actions: - On a long entry signal, it enters a long position labeled "Long," using the full strategy parameters for sizing and direction. - On a long exit signal (and only if holding a positive position size), it closes the "Long" position. The comment for the close order specifies the reason: either crossing below the exit level (including the level value) or due to the red histogram with a two-bar decline. This setup ensures automated trade management based solely on the indicator's behavior. ### Alerts Section The script sets up three alert conditions that can notify users via TradingView's alert system: - One for the crossover-based long entry, with a message indicating the indicator crossed above zero and is rising, signaling a long opportunity. - Another for the increasing-value long entry, noting the indicator's rise on the specified timeframe as a long signal. - A third for the red histogram with two-bar decline exit, warning of the condition to exit a long position. These alerts are independent of the strategy execution and can be used for manual trading or monitoring even if the automated strategy isn't running.
Strategi Pine Script®
oleh QuantVault
Candle Breakout StrategyShort description (one-liner) Candle Breakout Strategy — identifies a user-specified candle (UTC time), draws its high/low range, then enters on breakouts with configurable stop-loss, take-profit (via Risk:Reward) and optional alerts. Full description (ready-to-paste) Candle Breakout Strategy Version 1.0 — Strategy script (Pine v5) Overview The Candle Breakout Strategy automatically captures a single "range candle" at a user-specified UTC time, draws its high/low as a visible box and dashed level lines, and waits for a breakout. When price closes above the range high it enters a Long; when price closes below the range low it enters a Short. Stop-loss is placed at the opposite range boundary and take-profit is calculated with a user-configurable Risk:Reward multiplier. Alerts for entries can be enabled. This strategy is intended for breakout style trading where a clearly defined intraday range is established at a fixed time. It is simple, transparent and easy to adapt to multiple symbols and timeframes. How it works (step-by-step) On every bar the script checks the current UTC time. When the first bar that matches the configured Target Hour:Target Minute (UTC) appears, the script records that candle’s high and low. This defines the breakout range. A box and dashed lines are drawn on the chart to display the range and extended to the right while the range is active. The script then waits for price to close outside the box: Close > Range High → Long entry Close < Range Low → Short entry When an entry triggers: Stop-loss = opposite range boundary (range low for longs, range high for shorts). Take-profit = entry ± (risk × Risk:Reward). Risk is computed as the distance between entry price and stop-loss. After entry the range becomes inactive (waitingForBreakout = false) until the next configured target time. Inputs / Parameters Target Hour (UTC) — the hour (0–23) in UTC when the range candle is detected. Target Minute — minute (0–59) of the target candle. Risk:Reward Ratio — multiplier for computing take profit from risk (0.5–10). Example: 2 means TP = entry + 2×risk. Enable Alerts — turn on/off entry alerts (string message sent once per bar when an entry occurs). Show Last Box Only (internal behavior) — when enabled the previous box is deleted at the next range creation so only the most recent range is visible (default behavior in the script). Visuals & On-chart Info A semi-transparent blue box shows the recorded range and extends to the right while active. Dashed horizontal lines mark the range high and low. On-chart shapes: green triangle below bar for Long signals, red triangle above bar for Short signals. An information table (top-right) displays: Target Time (UTC) Active Range (Yes / No) Range High Range Low Risk:Reward Alerts If Enable Alerts is on, the script sends an alert with the following formats when an entry occurs: Long alert: 🟢 LONG SIGNAL Entry Price: Stop Loss: Take Profit: Short alert: 🔴 SHORT SIGNAL Entry Price: Stop Loss: Take Profit: Use TradingView's alert dialog to create alerts based on the script — select the script’s alert condition or use the alert() messages. Recommended usage & tips Timeframe: This strategy works on any timeframe but the definition of "candle at target time" depends on the chart timeframe. For intraday breakout styles, use 1m — 60m charts depending on the session you want to capture. Target Time: Choose a time that is meaningful for the instrument (e.g., market open, economic release, session overlap). All times are handled in UTC. Position Sizing: The script’s example uses strategy.percent_of_equity with 100% default — change default_qty_value or strategy settings to suit your risk management. Filtering: Consider combining this breakout with trend filters (EMA, ADX, etc.) to reduce false breakouts. Backtesting: Always backtest over a sufficiently large and recent sample. Pay attention to slippage and commission settings in TradingView’s strategy tester. Known behavior & limitations The script registers the breakout on close outside the recorded range. If you prefer intrabar breakout rules (e.g., high/low breach without close), you must adjust the condition accordingly. The recorded range is taken from a single candle at the exact configured UTC time. If there are missing bars or the chart timeframe doesn't align, the intended candle may differ — choose the target time and chart timeframe consistently. Only a single active position is allowed at a time (the script checks strategy.position_size == 0 before entries). Example setups EURUSD (Forex): Target Time 07:00 UTC — captures London open range. Nifty / Index: Target Time 09:15 UTC — captures local session open range. Crypto: Target Time 00:00 UTC — captures daily reset candle for breakout. Risk disclaimer This script is educational and provided as-is. Past performance is not indicative of future results. Use proper risk management, test on historical data, and consider slippage and commissions. Do not trade real capital without sufficient testing. Change log v1.0 — Initial release: range capture, box and level drawing, long/short entry by close breakout, SL at opposite boundary, TP via Risk:Reward, alerts, info table. If you want, I can also: Provide a short README version (2–3 lines) for the TradingView “Short description” field. Add a couple of suggested alert templates for the TradingView alert dialog (if you want alerts that include variable placeholders). Convert the disclaimer into multiple language versions.
Strategi Pine Script®
oleh hashem-trader
Gold 15m: Trend + S/R + Liquidity Sweep (RR 1:2)This strategy is designed for short-term trading on XAUUSD (Gold) using the 15-minute timeframe. It combines trend direction, support/resistance pivots, liquidity sweep detection, and momentum confirmation to identify high-probability reversal setups in line with the dominant market trend. ⚙️ Core Logic: Trend Filter (EMA 200): The strategy only takes long positions when price is above the 200 EMA and short positions when price is below it. Support/Resistance via Pivots: Dynamic swing highs and lows are identified using pivot points. These act as local supply and demand levels where liquidity is likely to accumulate. Liquidity Sweep Detection: A bullish liquidity sweep occurs when price briefly breaks below the last pivot low (grabbing liquidity) and then closes back above it. A bearish sweep occurs when price breaks above the last pivot high and then closes back below. Momentum & Candle Strength: The strategy filters signals based on candle range and body size to ensure entries occur during strong price reactions, not weak retracements. Risk Management (1:2 RR): Stop-loss is placed slightly beyond the last pivot level using ATR-based buffers, and take-profit is set at 2× the risk distance, maintaining a reward-to-risk ratio of 1:2. 💼 Trade Logic Summary: Long Entry: After a bullish liquidity sweep & reclaim, momentum confirmation, and trend alignment (above EMA 200). Short Entry: After a bearish sweep & reclaim, momentum confirmation, and trend alignment (below EMA 200). Exit: Automated via ATR-based Stop Loss and Take Profit targets. 📊 Customization Options: Adjustable EMA length, pivot settings, ATR multipliers, and RR ratio. Option to enable/disable trend filter. Toggle display of S/R zones on chart. 🧠 Best Use: Works best during London and New York sessions when Gold shows strong momentum. Can be adapted for forex pairs and indices by tuning ATR and pivot parameters.
Strategi Pine Script®
oleh phanongkumsen
Multi-TF Gates (Labels + Alerts)//@version=6 indicator("PO9 – Multi-TF Gates (Labels + Alerts)", overlay=true, max_lines_count=500) iYear=input.int(2024,"Anchor Year",minval=1970) iMonth=input.int(11,"Anchor Month",minval=1,maxval=12) iDay=input.int(6,"Anchor Day",minval=1,maxval=31) useSymbolTZ=input.bool(true,"Use symbol's exchange timezone (syminfo.timezone)") tzChoice=input.string("Etc/UTC","Custom timezone (if not using symbol TZ)",options= ) anchorType=input.string("FX NY 17:00","Anchor at",options= ) showEvery=input.int(9,"Mark every Nth candle",minval=1) showD=input.bool(true,"Show Daily") show3H=input.bool(true,"Show 3H") show1H=input.bool(true,"Show 1H") show15=input.bool(true,"Show 15M") show5=input.bool(false,"Show 5M (optional)") colD=input.color(color.new(color.red,0),"Daily color") col3H=input.color(color.new(color.orange,0),"3H color") col1H=input.color(color.new(color.yellow,0),"1H color") col15=input.color(color.new(color.teal,0),"15M color") col5=input.color(color.new(color.gray,0),"5M color") styStr=input.string("dashed","Line style",options= ) lnW=input.int(2,"Line width",minval=1,maxval=4) extendTop=input.float(1.5,"ATR multiples above high",minval=0.1) extendBottom=input.float(1.5,"ATR multiples below low",minval=0.1) showLabels=input.bool(true,"Show labels") enableAlerts=input.bool(true,"Enable alerts") f_style(s)=>s=="solid"?line.style_solid:s=="dashed"?line.style_dashed:line.style_dotted var lines=array.new_line() f_prune(maxKeep)=> if array.size(lines)>maxKeep old=array.shift(lines) line.delete(old) tzEff=useSymbolTZ?syminfo.timezone:tzChoice anchorTs=anchorType=="FX NY 17:00"?timestamp("America/New_York",iYear,iMonth,iDay,17,0):timestamp(tzEff,iYear,iMonth,iDay,0,0) atr=ta.atr(14) f_vline(_color,_tf,_idx)=> y1=low-atr*extendBottom y2=high+atr*extendTop lid=line.new(x1=bar_index,y1=y1,x2=bar_index,y2=y2,xloc=xloc.bar_index,extend=extend.none,color=_color,style=f_style(styStr),width=lnW) if showLabels label.new(x=bar_index,y=high+(atr*2),text=_tf+" #"+str.tostring(_idx),xloc=xloc.bar_index,style=label.style_label_down,color=_color,textcolor=color.black) array.push(lines,lid) is_tf_open(tf)=> time==request.security(syminfo.tickerid,tf,time,barmerge.gaps_off,barmerge.lookahead_off) f_tf(_tf,_show,_color,_name)=> var bool started=false var int idx=0 isOpen=_show and is_tf_open(_tf) firstBar=isOpen and (time>=anchorTs) and (nz(time ,time)
Penunjuk Pine Script®
oleh austinkhaye
Best Time Slots — Auto-Adapt (v6, TF-safe) + Range AlertsTime & binning Auto-adapt to timeframe Makes all time windows scale to your chart’s bar size (so it “just works” on 1m, 15m, 4H, Daily). • On = recommended. • Off = fixed default lengths. Minimum Bin (minutes) The size of each daily time slot we track (e.g., 5-min bins). The script uses the larger of this and your bar size. • Higher = fewer, broader slots; smoother stats. • Lower = more, narrower slots; needs more history. • Try: 5–15 on intraday, 60–240 on higher TFs. Lookback windows (used when Auto-adapt = ON) Target ER Window (minutes) How far back we look to judge Efficiency Ratio (how “straight” the move was). • Higher = stricter/smoother; fewer bars qualify as “movement”. • Lower = more sensitive. • Try: 60–120 min intraday; 240–600 min for higher TFs. Target ATR Window (minutes) How far back we compute ATR (typical range). • Higher = steadier ATR baseline. • Lower = reacts faster. • Try: 30–120 min intraday; 240–600 min higher TFs. Target Normalization Window (minutes) How far back for the average ATR (the baseline we compare to). • Higher = stricter “above average range” check. • Lower = easier to pass. • Try: ~500–1500 min. What counts as “movement” ER Threshold (0–1) Minimum efficiency a bar must have to count as movement. • Higher = only very “clean, one-direction” bars count. • Lower = more bars count. • Try: 0.55–0.65. (0.60 = balanced.) ATR Floor vs SMA(ATR) Requires range to be at least this many × average ATR. • Higher (e.g., 1.2) = demand bigger-than-usual ranges. • Lower (e.g., 0.9) = allow smaller ranges. • Try: 1.0 (above average). How history is averaged Recent Days Weight (per-day decay) Gives more weight to recent days. Example: 0.97 ≈ each day old counts ~3% less. • Higher (0.99) = slower fade (older days matter more). • Lower (0.95) = faster fade. • Try: 0.97–0.99. Laplace Prior Seen / Laplace Prior Hit “Starter counts” so early stats aren’t crazy when you have little data. • Higher priors = probabilities start closer to average; need more real data to move. • Try: Seen=3, Hit=1 (defaults). Min Samples (effective) Don’t highlight a slot unless it has at least this many effective samples (after decay + priors). • Higher = safer, but fewer highlights early. • Try: 3–10. When to highlight on the chart Min Probability to Highlight We shade/mark bars only if their slot’s historical movement probability is ≥ this. • Higher = pickier, fewer highlights. • Lower = more highlights. • Try: 0.45–0.60. Show Markers on Good Bins Draws a small square on bars that fall in a “good” slot (in addition to the soft background). Limit to market hours (optional) Restrict to Session + Session Only learn/score inside this time window (e.g., “0930-1600”). Uses the chart/exchange timezone. • Turn on if you only care about RTH. Range (chop) alerts Range START if ER ≤ Triggers range when efficiency drops below this level (price starts zig-zagging). • Higher = easier to call “range”. • Lower = stricter. Range START if ATR ≤ this × SMA(ATR) Also triggers range when ATR shrinks below this fraction of its average (volatility contraction). • Higher (e.g., 1.0) = stricter (must be at/under average). • Lower (e.g., 0.9) = easier to call range. Alerts on bar close If ON, alerts fire once per bar close (cleaner). If OFF, they can trigger intrabar (faster, noisier). Quick “what happens if I change X?” Want more highlighted times? ↓ Min Probability, ↓ ER Threshold, or ↓ ATR Floor (e.g., 0.9). Want stricter highlights? ↑ Min Probability, ↑ ER Threshold, or ↑ ATR Floor (e.g., 1.2). Want recent days to matter more? ↑ Recent Days Weight toward 0.99. On 4H/Daily, widen Minimum Bin (e.g., 60–240) and maybe lower Min Probability a bit.
Penunjuk Pine Script®
oleh hfdavid