Mulakan

Swingtrading

MAxRSI Signals [KedArc Quant]Description: MAxRSI Indicator Marks LONG/SHORT signals from a Moving Average crossover and (optionally) confirms them with RSI. Includes repaint-safe confirmation, optional higher-timeframe (HTF) smoothing, bar coloring, and alert conditions. Why combine MA + RSI * The MA crossover is the primary trend signal (fast trend vs slow trend). * RSI is a gate, not a second, separate signal. A crossover only becomes a trade signal if momentum agrees (e.g., RSI ≥ level for LONG, ≤ level for SHORT). This reduces weak crosses in ranging markets. * The parts are integrated in one rule: *Crossover AND RSI condition (if enabled)* → plot signal/alert. No duplicated outputs or unrelated indicators. How it works (logic) * MA types: SMA / EMA / WMA / HMA (HMA is built via WMA of `len/2` and `len`, then WMA with `sqrt(len)`). * Signals: * LONG when *Fast MA crosses above Slow MA* and (if enabled) *RSI ≥ Long Min*. * SHORT when *Fast MA crosses below Slow MA* and (if enabled) *RSI ≤ Short Max*. * Repaint-safe (optional): confirms crosses on closed bars to avoid intrabar repaint. * HTF (optional): computes MA/RSI on a higher timeframe to smooth noise on lower charts. * Alerts: crossover alerts + state-flip (bull↔bear) alerts. How to use (step-by-step) 1. Add to chart. Set MA Type, Fast and Slow (keep Fast < Slow). 2. Turn Use RSI Filter ON for confirmation (default: RSI 14 with 50/50 levels). 3. (Optional) Turn Repaint-Safe ON for close-confirmed signals. 4. (Optional) Turn HTF ON (e.g., 60 = 1h) for smoother signals on low TFs. 5. Enable alerts: pick “MAxRSI Long/Short” or “Bullish/Bearish State”. Timeframe guidance * Intraday (1–15m): EMA 9–20 fast vs EMA 50 slow, RSI filter at 50/50. * Swing (1h–D): EMA 20 fast vs EMA 200 slow, RSI 50/50 (55/45 for stricter). What makes it original * Repaint-safe cross confirmation (previous-bar check) for reliable signals/alerts. * HTF gating (doesn’t compute both branches) for speed and clarity. * Warning-free MA helper (precomputes SMA/EMA/WMA/HMA each bar), HMA built from built-ins only. * State-flip alerts and optional RSI overlay on price pane. Built-ins used `ta.sma`, `ta.ema`, `ta.wma`, (HMA built from these), `ta.rsi`, `ta.crossover`, `ta.crossunder`, `request.security`, `plot`, `plotshape`, `barcolor`, `alertcondition`, `input.*`, `math.*`. Note: Indicator only (no orders). Test settings per symbol. Not financial advice. ⚠️ Disclaimer This script is provided for educational purposes only. Past performance does not guarantee future results. Trading involves risk, and users should exercise caution and use proper risk management when applying this strategy.
Penunjuk Pine Script®
oleh kedarcquant
Trendline Breakout Strategy [KedArc Quant] Description A single, rule-based system that builds two trendlines from confirmed swing pivots and trades their breakouts, with optional retest, trend-regime gates (EMA / HTF EMA), and ATR-based risk. All parts serve one decision flow: structure → breakout → gated entry → managed risk. What it does (for traders) Draws Up line (teal) through the last two Higher Lows and Down line (red) through the last two Lower Highs, then extends them forward. Long when price breaks above red; Short when price breaks below teal. Optional Retest entry: after a break, wait for a pullback toward the broken line within an ATR-scaled buffer. Uses ATR stop and R-multiple target so risk is consistent across symbols/timeframes. Labels HL1/HL2/LH1/LH2 so non-coders can verify which pivots built each line. Why these components are combined Pure breakout systems on trendlines suffer from three practical issues: False breaks in chop → solved by trend-regime gates (EMA / HTF EMA) that only allow trades aligned with the prevailing trend. Uneven volatility across markets/timeframes → solved by ATR-based stop/target, normalizing distance so R-multiples are comparable. First break whipsaws near wedge apices → mitigated by the optional retest rule that demands a pullback/hold before entry. These modules are not separate indicators with their own signals. They are support roles inside one method. The pivot engine defines structure, the breakout detector defines signal, the regime gates decide if we’re allowed to take that signal, and the ATR module sizes risk. Together they make the trendline breakout usable, testable, and explainable. How it works (mechanism; each component explained) 1) Pivot engine (structure, non-repainting) Swings are confirmed with ta.pivotlow/high(L, R). A pivot only exists after R bars (no look-ahead), so once plotted, the line built from those pivots will not repaint. 2) Trendline builder (geometry) Teal line updates when two consecutive pivot lows satisfy HL2.price > HL1.price (and HL2 occurs after HL1). Red line updates when two consecutive pivot highs satisfy LH2.price < LH1.price. Lines are extended right and their current value is read every bar via line.get_price(). 3) Breakout detector (signal) On every bar, compute: crossover(close, redLine) ⇒ Long breakout crossunder(close, tealLine) ⇒ Short breakdown 4) Regime gates (trend filters, not separate signals) EMA gate: allow longs only if close > EMA(len), shorts only if close < EMA(len). HTF EMA gate (optional): same rule on a higher timeframe to avoid fighting the larger trend. These do not create entries; they simply permit or block the breakout signal. 5) Retest module (optional confirmation) After a breakout, record the line price. A valid retest occurs if price pulls back within an ATR-scaled buffer toward that broken line and then closes back in the breakout direction. This reduces first-tick fakeouts. 6) Risk module (position exit) Initial stop = ATR(len) × atrMult from entry. Target = tpR × (ATR × atrMult) (e.g., 2R). This keeps results consistent across instruments/timeframes. Entries & exits Long entry Base: close breaks above red and passes EMA/HTF gates. Retest (if enabled): after the break, price pulls back near the broken red line (within the ATR buffer) and holds; then enter. Short entry Mirror logic with teal (break below & gates), optionally with a retest. Exit strategy.exit places ATR stop & R-multiple target automatically. Optional “flip”: close if the opposite base signal triggers. How to use it (step-by-step) Timeframe: 1–15m for intraday, 1–4h for swing. Start defaults: Pivot L/R = 5, EMA len = 200, ATR len = 14, ATR mult = 2, TP = 2R, Retest = ON. Tune sensitivity: Faster lines (more trades): set L/R = 3–4. Fewer counter-trend trades: enable HTF EMA (e.g., 60-min or Daily). Visual audit: labels HL1/HL2 & LH1/LH2 show which pivots built each line—verify by eye. Alerts: use Long breakout, Short breakdown, and Retest alerts to automate. Originality (why it merits publication) Trades the visualization: many “auto-trendline” tools only draw lines; this one turns them into testable, alertable rules. Integrated design: each component has a defined role in the same pipeline—no unrelated indicators bolted together. Transparent & non-repainting: pivot confirmation removes look-ahead; labels let non-coders understand the setup that produced each signal. Notes & limitations Lines update only after pivot confirmation; that lag is intentional to avoid repainting. Breakouts near an apex can whipsaw; prefer Retest and/or HTF gate in choppy regimes. Backtests are idealized; forward-test and size risk appropriately. ⚠️ Disclaimer This script is provided for educational purposes only. Past performance does not guarantee future results. Trading involves risk, and users should exercise caution and use proper risk management when applying this strategy.
Strategi Pine Script®
oleh kedarcquant
Multipower Entry SecretMultipower Entry Secret indicator is designed to be the ultimate trading companion for traders of all skill levels—especially those who struggle with decision-making due to unclear or overwhelming signals. Unlike conventional trading systems cluttered with too many lines and confusing alerts, this indicator provides a clear, adaptive, and actionable guide for market entries and exits. Key Points: Clear Buy/Sell/Wait Signals: The script dynamically analyzes price action, candle patterns, volume, trend strength, and higher time frame context. This means it gives you “Buy,” “Sell,” or “Wait” signals based on real, meaningful market information—filtering out the noise and weak trades. Multi-Timeframe Adaptive Analysis: It synchronizes signals between higher and current timeframes, ensuring you get the most reliable direction—reducing the risk of getting caught in fake moves or sudden reversals. Automatic Support, Resistance & Liquidity Zones: Key levels like support, resistance, and liquidity zones are auto-detected and displayed directly on the chart, helping you make precise decisions without manual drawing. Real-Time Dashboard: All relevant information, such as trend strength, market intent, volume sentiment, and the reason behind each signal, is neatly summarized in a dashboard—making monitoring effortless and intuitive. Customizable & Beginner-Friendly: Whether you’re a newcomer wanting straightforward guidance or a professional needing advanced customization, the indicator offers flexible options to adjust analysis depth, timeframes, sensitivity, and more. Visual & Clutter-Free: The design ensures that your chart remains clean and readable, showing only the most important information. This minimizes mental overload and allows for instant decision-making. Who Will Benefit? Beginners who want to learn trading logic, avoid common traps, and see the exact reason behind every signal. Advanced traders who require adaptive multi-timeframe analytics, fast execution, and stress-free monitoring. Anyone who wants to save screen time, reduce analysis paralysis, and have more confidence in every trade they take. 1. No Indicator Clutter Intent: Many traders get confused by charts filled with too many indicators and signals. This often leads to hesitation, missed trades, or taking random, risky trades. In this Indicator: You get a clean and clutter-free chart. Only the most important buy/sell/wait signals and relevant support/resistance/liquidity levels are shown. These update automatically, removing the “overload” and keeping your focus sharp, so your decision-making is faster and stress-free. 2. Exact Entry Guide Intent: Traders often struggle with entry timing, leading to FOMO (fear of missing out) or getting trapped in sudden market reversals. In this Indicator: The system uses powerful adaptive logic to filter out weak signals and only highlight the strongest market moves. This not only prevents you from entering late or on noise, but also helps avoid losses from false breakouts or whipsaws. You get actionable suggestions—when to enter, when to hold back—so your entries are high-conviction and disciplined. 3. HTF+LTF Logic: Multitimeframe Sync Analysis Intent: Most losing trades happen when you act only on the short-term chart, ignoring the bigger market trend. In this Indicator: Signals are based on both the current chart timeframe (LTF) and a higher (HTF, like hourly/daily) timeframe. The indicator synchronizes trend direction, momentum, and structure across both levels, quickly adapting to show you when both are aligned. This filtering results in “only trade with the bigger trend”—dramatically increasing your win rate and market confidence. 4. Auto Support/Resistance & Liquidity Zones Intent: Drawing support/resistance and liquidity zones manually is time-consuming and error-prone, especially for beginners. In this Indicator: The system automatically identifies and plots the most crucial support/resistance levels and liquidity zones on your chart. This is based on adaptive, real-time price and volume analysis. These zones highlight where major institutional activity, trap setups, or real breakouts/reversals are most likely, removing guesswork and giving you a clear reference for entries, exits, and stop placements. 5. Clear Action/Direction Intent: Traders need certainty—what does the market want right now? Most indicators are vague. In this Indicator: Your dashboard always displays in plain words (like “BUY”, “SELL”, or “WAIT”) what action makes sense in the current market phase. Whether it’s a bull trap, volume spike, wick reversal, or exhaustion—it’s interpreted and explained clearly. No more confusion—just direct, real-time advice. 6. For Everyone (Beginner to Pro) Intent: Most advanced indicators are overwhelming for new traders; simple ones lack depth for professionals. In this Indicator: It is simple enough for a beginner—just add it to the chart and instantly see what action to consider. At the same time, it includes advanced adaptive analysis, multi-timeframe logic, and customizable settings so professional traders can fine-tune it for their strategies. 7. Ideal Usage and User Benefits Instant Decision Support: Whenever you’re unsure about a trade, just look at the indicator’s suggestion for clarity. Entry Learning: Beginners get real-time “practice” by not only seeing signals, but also the reason behind them—improving your chart reading and market understanding. Screen Time & Stress Reduction: Clear, relevant information only; no noise, less fatigue, faster decisions. Makes Trading Confident & Simple: The smart dashboard splits actionable levels (HTF, LTF, action) so you never miss a move, avoid traps, and stay aligned with high-probability trades. 8. Advanced Input Settings (Smart Customization) Explained with Examples: Enable Wick Analysis: Finds candles with strong upper/lower wicks (signs of rejection/buying/selling force), alerting you to hidden reversals and protecting from FOMO entries. Enable Absorption: Detects when heavy order flow from one side is “absorbed” by the other (shows where institutional buyers/sellers are likely active, helps spot fake breakouts). Enable Unusual Breakout: Highlights real breakouts—large volatility plus high volume—so you catch genuine moves and avoid random spikes. Enable Range/Expansion: Smartly flags sudden range expansions—when the market goes from quiet to volatile—so you can act at the start of real trends. Trend Bar Lookback: Adjusts how many bars/candles are used in trend calculations. Short (fast trades, more signals), long (more reliability, fewer whipsaws). Bull/Bear Bars for Strong Trend Min: Sets how many candles in a row must support a trend before calling it “strong”—prevents flipping signals, keeps you disciplined. Volume MA Length: Lets you adjust how many bars back volume is averaged—fine-tune for your asset and trading style for best volume signals. Swing Lookback Bars: Set how many bars to use for swing high/low detection—short (quick swing levels), long (stronger support/resistance). HTF (Bias Window): Decide which higher timeframe the indicator should use for big-picture market mood. Adjustable for any style (scalp, swing, position). Adaptive Lookback (HTF): Choose how much HTF history is used for detecting major extremes/zones. Quick adjust for more/less sensitivity. Show Support/Resistance, Liquidity Zones, Trendlines: Toggle them on/off instantly per your needs—keeps your chart relevant and tailored. 9. Live Dashboard Sections Explained Intent HTF: Shows if the bigger timeframe currently has a Bullish, Bearish, or Neutral (“Chop”) intent, based on strict volume/price body calculations. Instant clarity—no more guessing on trend bias. HTF Bias: Clear message about which side (buy/sell/sideways) controls the market on the higher timeframe, so you always trade with the “big money.” Chart Action: The central action for the current bar—Whether to Buy, Sell, or Wait—calculated from all indicator logic, not just one rule. TrendScore Long/Short: See how many candles in your chosen window were bullish or bearish, at a glance. Instantly gauge market momentum. Reason (WHY): Every time a signal appears, the “reason” cell tells you the primary logic (breakout, wick, strong trend, etc.) behind it. Full transparency and learning—never trade blindly. Strong Trend: Shows if the market is currently in a powerful trend or not—helping you avoid choppy, risky entries. HTF Vol/Body: Displays current higher timeframe volume and candle body %—helping spot when big players are active for higher probability trades. Volume Sentiment: A real-time analysis of market psychology (strong bullish/bearish, neutral)—making your decision-making much more confident. 10. Smart and User-Friendly Design Multi-timeframe Adaptive: All calculations can now be drawn from your choice of higher or current timeframe, ensuring signals are filtered by larger market context. Flexible Table Position: You can set the live dashboard/summary anywhere on the chart for best visibility. Refined Zone Visualization: Liquidity and order blocks are visually highlighted, auto-tuning for your settings and always cleaning up to stay clutter-free. Multi-Lingual & Beginner Accessible: With Hindi and simple English support, descriptions and settings are accessible for a wide audience—anyone can start using powerful trading logic with zero language barrier. Efficient Labels & Clear Reasoning: Signal labels and reasons are shown/removed dynamically so your chart stays informative, not messy. Every detail of this indicator is designed to make trading both simpler and smarter—helping you avoid the common pitfalls, learn real price action, stay in sync with the market’s true mood, and act with discipline for higher consistency and confidence. This indicator makes professional-grade market analysis accessible to everyone. It’s your trusted assistant for making smarter, faster, and more profitable trading decisions—providing not just signals, but also the “why” behind every action. With auto-adaptive logic, clear visuals, and strong focus on real trading needs, it lets you focus on capturing the moves that matter—every single time.
Penunjuk Pine Script®
oleh cnagda3
2
Set & Forget – AlexG Club – ChecklistThe Set & Forget – AlexG Club – Checklist is built to help traders apply the well-known Set and Forget strategy from the famous AlexG (falexg) and the G-Club community. This indicator displays a clear, on-chart checklist table of trading confluences. Each confluence adds to a total score, making it easier to objectively evaluate whether a trade setup aligns with the AlexG / G-Club strategy. ✅ Features: • Customizable confluence checklist (trend alignment, S/R levels, candlestick signals, momentum, etc.) • Automatic scoring system to calculate the Set & Forget readiness of a trade • Clean table visualization on your chart • Flexible thresholds — you decide how many confluences equal a strong setup 🚀 How to Use: Add the indicator to your chart. Adjust the confluences to reflect your own AlexG / G-Club inspired checklist. Use the total score to validate trades before you pull the trigger. ⚠️ Disclaimer: This indicator is for educational purposes only. It is not financial advice and does not guarantee profitability. Always manage your risk and test before using live.
Penunjuk Pine Script®
oleh AnthonyToday
Gann Fan Strategy [KedarArc Quant]Description A single-concept, rule-based strategy that trades around a programmatic Gann Fan. It anchors to a swing (or a manual point), builds 1×1 and related fan lines numerically, and triggers entries when price interacts with the 1×1 (breakout or bounce). Management is done entirely with the fan structure (next/previous line) plus optional ATR trailing. What TV indicators are used * Pivots: `ta.pivothigh/ta.pivotlow` to confirm swing highs/lows for anchor selection. * ATR: `ta.atr` only to scale the 1×1 slope (optional) and for an optional trailing stop. * EMA: `ta.ema` as a trend filter (e.g., only long above the EMA, short below). No RSI/MACD/Stoch/Heikin/etc. The logic is one coherent framework: Gann price–time geometry, with ATR as a scale and EMA as a risk filter. How it works 1. Anchor * Auto: chooses the most recent *confirmed* pivot (you control Left/Right). * Manual: set a price and bar index and the fan will hold that point (no re-anchoring). * Optional Re-anchor when a newer pivot confirms. 2. 1×1 Slope (numeric, not cosmetic) * ATR mode: `1×1 = ATR(Length) × Multiplier` (adapts to volatility). * Fixed mode: `ticks per bar` (constant slope). Because slope is numeric, it doesn’t change with chart zoom, unlike the drawing tool. 3. Fan Lines Builds classic ratios around the 1×1: 1/8, 1/4, 1/3, 1/2, 1/1, 2/1, 3/1, 4/1, 8/1. 4. Signals * Breakout: cross of price over/under the 1×1 in the EMA-aligned direction. * Bounce (optional): touch + reversal across the 1×1 to reduce whipsaw. 5. Exits & Risk * Take-profit at the next fan line; Stop at the previous fan line. * If a level is missing (right after re-anchor), a fallback Risk-Reward (RR) is used. * Optional ATR trailing stop. Why this is unique * True numeric fan: The 1×1 slope is calculated from ATR or fixed ticks—not from screen geometry—so it is scale-invariant and reproducible across users/timeframes. * Deterministic anchor logic: Uses confirmed pivots (with your L/R settings). No look-ahead; anchors update only when the right bars complete. * Fan-native trade management: Both entries and exits come from the fan structure itself (with a minimal ATR/EMA assist), keeping the method pure. * Two entry archetypes: Breakout for momentum days; Bounce for range days—switchable without changing the core model. * Manual mode: Lock a session’s bias by anchoring to a chosen swing (e.g., day’s first major low/high) and keep the fan constant all day. Inputs (quick guide) * Auto Anchor (Left/Right): pivot sensitivity. Higher values = fewer, stronger anchors. * Re-anchor: refresh to newer pivots as they confirm. * Manual Anchor Price / Bar Index: fixes the fan (turn Auto off). * Scale 1×1 by ATR: on = adaptive; off = use ticks per bar. * ATR Length / ATR Multiplier: controls adaptive slope; start around 14 / 0.25–0.35. * Ticks per bar: exact fixed slope (match a hand-drawn fan by computing slope ÷ mintick). * EMA Trend Filter: e.g., 50–100; trades only in EMA direction. * Use Bounce: require touch + reverse across 1×1 (helps in chop). * TP/SL at fan lines; Fallback RR for missing levels; ATR Trailing Stop optional. * Transparency/Plot EMA: visual preferences. Tips * Range days: larger pivots (L/R 8–12), Bounce ON, ATR Multiplier \~0.30–0.40, EMA 100. * Trend days: L/R 5–6, Breakout, Multiplier \~0.20–0.30, EMA 50, ATR trail 1.0–1.5. * Match the TV Gann Fan drawing: turn ATR scale OFF, set ticks per bar = `(Δprice between anchor and 1×1 target) / (bars) / mintick`. Repainting & testing notes * Pivots require Right bars to confirm; anchors are set after confirmation (no look-ahead). * Signals use the current bar close with TradingView strategy mechanics; real-time vs. bar-close can differ slightly, as with any strategy. * Re-anchoring legitimately moves the structure when new pivots confirm—by design. ⚠️ Disclaimer This script is provided for educational purposes only. Past performance does not guarantee future results. Trading involves risk, and users should exercise caution and use proper risk management when applying this strategy.
Strategi Pine Script®
oleh kedarcquant
EMA + RSI Daily Bias Clarity Indi📊 EMA + RSI Daily Bias • Clarity Panel This indicator is built for clarity, structure, and confidence in trading. It combines EMAs, RSI, and a Daily Bias filter into one panel that helps you quickly understand trend, momentum, and alignment without cluttering your chart. It does not provide signals or financial advice — instead, it simplifies your decision-making process by presenting conditions in a clear format. 🔧 Features 📈 Customizable EMAs (Fast & Slow) Define short-term vs. medium-term trend direction. Adjust the lengths for scalping, intraday, or swing trading. 🎯 RSI Integration Tracks momentum on your active timeframe. Highlights overbought (OB) and oversold (OS) conditions. Used to filter entries and avoid chasing stretched moves. 🧭 Daily Bias (Higher Timeframe RSI) Pulls RSI from the Daily chart (or chosen HTF). Helps confirm if your local trade setup is aligned with higher timeframe momentum. ✨ Clarity Panel with Emojis Displays Trend, HTF Bias, RSI reading, and State. States include: ⏳ WAIT → No alignment or unclear conditions. 🟢 / 🔴 CONFIRM → Trend, RSI, and bias all align for a setup. 💰 COLLECT → RSI stretched to OB/OS, take partials or be cautious. ⚡ Optional Chart Markers BUY/SELL labels appear when conditions align. Alerts can be enabled for CONFIRM and COLLECT conditions. 💡 How to Use Start with EMAs → Check if price is trending above or below EMAs to determine short-term direction. Look at Daily Bias → See if RSI bias from higher timeframe (Daily by default) agrees with your local setup. Check RSI → If RSI is neutral, WAIT. If RSI confirms momentum with trend + bias, CONFIRM. If RSI is stretched into OB/OS, COLLECT. Use Panel for Quick Reads → The panel gives you a “dashboard” view of conditions so you don’t second-guess. Combine with Your Own Strategy → This script is best used as a clarity filter to stay disciplined, not as a standalone signal generator. 📊 Example Workflow Price above both EMAs ✅ Daily Bias shows BULL ✅ RSI at 62 (above midline, not yet overbought) ✅ → Panel shows 🟢 CONFIRM → consider entering long. Later, RSI rises to 72 (overbought) → Panel switches to 💰 COLLECT → take profits or tighten stops. ⚠️ Disclaimer This script is for clarity and educational purposes only. It does not provide financial advice, signals, or guaranteed profits. Always use proper risk management and combine with your own trading plan.
Penunjuk Pine Script®
oleh WallStreetPrincess
10
Liquidity Sweep Breakout - LSBLiquidity Sweep Breakout - LSB A professional session-based breakout system designed for OANDA:USDJPY and other JPY pairs. Not guesswork, but precision - built on detailed observation of institutional moves to capture clear trade direction daily. Master the Market’s Daily Bank Flow. --- Strategy Detail: I discovered this strategy after carefully studying how Japanese banks influence the forex market during their daily settlement period. Banks are some of the biggest players in the financial world, and when they adjust or settle their accounts in the morning, it often creates a push in the market. From years of observation, I noticed a consistent pattern, once banks finish their settlements, the market usually continues moving in the same direction that was formed right after those actions. This daily banking flow often sets the tone for the entire trading session, especially for JPY pairs like USDJPY. To capture this move, I built the indicator so that it follows the bank-driven trend with clear rules for entries, stop-loss (SL), and take-profit (TP). The system is designed with professional risk management in mind. By default, it assumes a $10,000 account size, risks only 1% of that balance per trade, and targets a 1:1.5 reward-to-risk ratio. This means for every $100 risked, the potential profit is $150. Such controlled risk makes the system safer and more sustainable for long-term traders. At the same time, users are not limited to this setup, they can adjust the account balance in the settings, and the indicator will automatically recalculate the lot size and risk levels based on their own capital. This ensures the strategy works for small accounts and larger accounts alike. 🌍 Why It Works Fundamentally driven: Based on **daily Japanese banking settlement flows**. Session-specific precision: Targets the exact window when USDJPY liquidity reshapes. Risk-managed: Always calculates lot size based on account and risk preferences. Automatable: With webhook + MT5 EA, it can be fully hands-free. --- ✅ Recommended Pair: USDJPY (best observed behavior). Timeframe: 3-Minute chart. Platform: TradingView Premium (for webhooks). Execution: MT5 via EA. --- 🔎 Strategy Concept The Tokyo Magic Breakout (TMB) is built on years of session observation and the unique daily rhythm of the Japanese banking system. Every morning between 5:50 AM – 6:10 AM PKT (09:50 – 10:10 JST), Japanese banks perform daily reconciliation and settlement. This often sets the tone for the USDJPY direction of the day. This strategy isolates that critical moment of liquidity adjustment and waits for a clean breakout confirmation. Instead of chasing noise, it executes only when price action is aligned with the Tokyo market’s hidden flows. --- 🕒 Timing Logic Session Start: 5:00 AM PKT (Tokyo market open range). Magic Candle: The 5:54 AM PKT candle is marked as the reference “breakout selector.” Checkpoints: First confirmation at 6:30 AM PKT, then every 15 minutes until 8:30 AM PKT. * If price stays inside the magic range → wait. * If a breakout happens but the candle wick touches the range → wait for the next checkpoint. * If by 8:30 AM PKT no clean breakout occurs → the day is marked as No Trade Day (NTD). 👉 Recommended timeframe: 3-Minute chart (3M) for precise signals. --- 📈 Trade Execution Entry: Clean break above/below the magic candle’s range. Stop-Loss: Opposite side of the Tokyo session high/low. Take-Profit: Calculated by Reward\:Risk ratio (default 1.5:1). Lot Size: Auto-calculated based on your risk model: * Fixed Dollar * % of Equity * Conservative (minimum of both). Visuals include: ✅ Entry/SL/TP lines ✅ Shaded risk (red) and reward (green) zones ✅ Trade labels (Buy/Sell with lot size & levels) ✅ TP/SL hit markers --- 🔔 Alerts & Automation (AutoTMB) This strategy is fully automation-ready with EA + MT5: 1. Enable alerts in TMB settings. 2. Insert your PineConnector License Key. 3. Configure your risk management preferences. 4. Create a TradingView alert → in the message box simply type: Pine Script® {{alert_message}} and set the EA webhook. Now, every breakout trade (with exact entry, SL, TP, and lot size) is sent instantly. 👉 On your MT5: * Install the EA. * Use the same license key. * Run it on a VPS or local MT5 terminal. You now have a hands-free trading system: AutoTMB.
Strategi Pine Script®
oleh humayunmha
Advanced Swing Trading Suite(Mastersinnifty)🔹 Core Logic The Advanced Swing Trading Suite is a complete framework for analyzing and trading market swings. It combines: A modified QQE momentum engine (adapted from the original QQE by © Peter_O under MPL 2.0). RSI-based trend strength filter for validation. Zigzag-driven swing structure detection (higher highs, higher lows, lower highs, lower lows). Dynamic trade and risk management modules for practical execution. By merging momentum, structure, and risk control, this tool goes beyond standalone indicators and provides a structured decision-support system for swing traders. 🔹 Uniqueness While the QQE concept is freely available, this script builds an integrated swing trading ecosystem that adds multiple layers of functionality: Swing structure analyzer that maps price action into HH, HL, LH, LL patterns in real time. Dynamic percentage-based trade table that automatically logs entries, exits, P&L %, and timestamps. Lot size calculator that converts account capital into position size per trade. Swing extensions and retracement projections for planning targets. Momentum confirmation via a tuned QQE + RSI engine. This makes it not just an indicator, but a complete swing trading suite. 🔹 Key Features ✔ Modified QQE + RSI Momentum Filter → Early trend confirmation. ✔ Real-Time Swing Structure Labels (HH, HL, LH, LL) → Clear market context. ✔ Trade Performance Table → Tracks signals with percentage P&L and timing. ✔ Lot Size Calculator → Position sizing based on account capital. ✔ Dynamic Stops & Targets → Swing highs/lows as stops, extensions for projections. ✔ Alerts Ready → Configurable buy/sell alerts. ✔ Visual Labels → Background highlighting and trade markers. 🔹 How to Use Entries: Green background = Long entry, Red background = Short entry. Structure: HH/HL/LH/LL labels mark evolving swing structure. Trade Table: Displays performance stats of past signals. Risk Control: Use lot size calculator for instant position sizing. Targets: Refer to swing extensions for profit zones. Alerts: Set alerts for buy/sell triggers to receive notifications. 🔹 Disclaimer This script integrates a modified version of QQE by © Peter_O (MPL 2.0 License). Original QQE source: mozilla.org All additional modules (swing analyzer, trade table, lot calculator, extensions) are original contributions by Mastersinnifty. ⚠️ Trading Disclaimer: This script is for educational purposes only and does not constitute financial advice. Past performance is not indicative of future results. Always conduct your own research, test thoroughly, and trade with proper risk management.
Penunjuk Pine Script®
oleh Mastersinnifty
Nifty Power -> Nifty 50 chart + EMA of RSI + avg volume strategyThis strategy works in 1 hour candle in Nifty 50 chart. In this strategy, upward trade takes place when there is a crossover of RSI 15 on EMA50 of RSI 15 and volume is greater than volume based EMA21. On the other hand, lower trade takes place when RSI 15 is less than EMA50 of RSI 15. Please note that there is no stop loss given and also that the trade will reverse as per the trend. Sometimes on somedays, there will be no trades. Also please note that this is an Intraday strategy. The trade if taken closes on 15:15 in Nifty 50. This strategy can be used for swing trading. Some pine script code such as supertrend and ema21 of close is redundant. Try not to get confused as only EMA50 of RSI 15 is used and EMA21 of volume is used. I am using built-in pinescript indicators and there is no special calculation done in the pine script code. I have taken numbars variable to count number of candles. For example, if you have 30 minuite chart then numbars variable will count the intraday candles accordingly and the same for 1 hour candles.
Strategi Pine Script®
oleh Archer_Trade
Cnagda Trading ToolCnagda Trading Tools - complete set of intraday trading 1. Trendline breakout based On ATR. 2. Live RSI, volume/candle average 20 Periods, trend direction last 34 periods, and some useful dashboard features. 3. Ma Scalp Line provide trend support and resistance + Where Line More Flat Previous Time You Also Use That Range As Support And Resistance 4. RSI based POC ( Point Of Control) indicate high Volume Area like fixed Range Volume profile 5. London session breakout with buy/sell Signal and NewYork session opening half hour range breakout with Buy/sell signal Ma Scalp Buy And Sell Signal For Short term Scalping ( 5 Min Timeframe) Based on Ema And Wma Crossover I hope these tools will improve your trading, but you should trade only after proper research, this indicator is not responsible for any loss.
Penunjuk Pine Script®
oleh cnagda3
9
Swing Anchored Vwap [BigBeluga]🔵 OVERVIEW Swing Anchored Vwap tracks the market’s directional behavior by anchoring VWAPs (Volume Weighted Average Price) to dynamically detected swing highs and lows. It visually distinguishes the active swing VWAP from historical ones—offering traders a clean view of trend-aligned value zones with clearly marked inflection points. 🔵 CONCEPTS Swing Anchored VWAPs: VWAPs are initiated from recent swing highs during downtrends and swing lows during uptrends. Trend Detection: The indicator identifies trend shifts based on the breaking of recent highest or lowest price value. Trend-Based Coloring:  • Green VWAPs: are drawn from swing lows in uptrends.  • Blue VWAPs: are drawn from swing highs in downtrends. Sensitivity Control: The Length input defines how far back the script looks to determine swing points—shorter lengths make it more reactive. 🔵 FEATURES Real-time VWAP projection from the current swing point, updated live. Historical VWAP traces with slightly faded color to emphasize the current active one. Swing markers automatically placed on highs/lows where VWAPs are anchored. Label with price value at the end of each active VWAP line for clarity. Adaptive color scheme that visually separates uptrend/downtrend zones. 🔵 HOW TO USE Use active VWAP as a dynamic support/resistance guide during ongoing trends. Observe breaks or rejections around these VWAPs for trend continuation or reversal clues . Compare current price position relative to swing VWAPs to assess trend maturity and extension . Combine with volume analysis or structure to increase conviction at swing points. 🔵 CONCLUSION Swing Anchored Vwap merges the logic of anchored VWAPs and swing structure into a responsive visual tool. It helps traders stay aligned with the current trend while offering historical context via previous value anchors—ideal for intraday to swing-level analysis.
Penunjuk Pine Script®
oleh BigBeluga
47
E³ ROC (slope): SMAsThis is a very powerful script for helping you understand the speed of moves. It measures the RATE OF CHANGE (ROC in %) of 5 key moving averages from the 10 to the 200. For example, a chart with a 200sma ROC of 0.3% usually corresponds to a faster moving asset (stock, crypto, etc) which likely also has a higher ATR and ADR%. Additionally, the indicator shows you the maximum the slope has performed within the last 126 bars (6 months on a daily chart) (or period of your preference). This helps you understand what you could potentially expect from the asset. For example, a 10sma which shows a max ROC of 1.5% on a chart with a 200sma max ROC of 0.3%, has therefore the potential for large bursts comparatively (5x the 200sma in this case) and helps you understand that the stock/asset has the potential for leaps and bounds. For high-growth stock swing traders, a 200sma slope of 0.25% is a great minimum criteria, and having at least 5x for the max on the faster smas such as the 10 or 20 or even 50. Interestingly, on a slow stock, such as NYSE:WMT (max 200sma = 0.18%), it can have runs of 0.78% as indicated by the max of the 10sma. This reading tells you that although it's a slower stock, it can act like a monster when it's got the heat. Typically, a stock's ADR% is about 8x to 12x the max ROC of the 200sma (10x easy rule of thumb). So for traders who only like to trade high ADR% stocks, overlooking a stock like NYSE:WMT with a 1.5% ADR and a 200sma ROC of only 0.18% could be a mistake if you didn't notice that the 10sma and 20sma show MAX ROC runs of almost 0.8% (the equivalent of a 8% ADR& stock). So clearly in that situation, knowing all this would allow you to take a breakout or the likes on NYSE:WMT with the intention of capturing the High ROC shorter term run. Bottom line: this insight is indispensable for short term swing traders, and this script likely has similarly profound use to day traders, FOREX traders, and crypto traders as well. Being able to know the rate of change (slope) of price change on a stock across different speeds (MAs) allows you to better assess the potential for hidden or outright opportunity. PURCHASE NOW: payhip.com
Penunjuk Pine Script®
oleh evanevansmusic
PulseWave Strategy Markking77PulseWave Strategy (Markking77) — Description & Indicator Roadmap PulseWave Strategy (Markking77) is a sleek, straightforward trading system that fuses three powerful market indicators — VWAP, MACD, and RSI — into one harmonious tool. Designed for traders who want clear, actionable signals, this strategy captures trend direction, momentum shifts, and market strength to help you spot optimal entry and exit points. Step 1: VWAP — The Market Trend Compass (Color: Blue) What it does: The Volume Weighted Average Price (VWAP) is the average price a security has traded at throughout the day, weighted by volume. It acts as a dynamic benchmark that many institutional traders rely on. Why it matters: Price above the VWAP (blue line) signals bullish momentum — buyers dominate. Price below the VWAP signals bearish momentum — sellers in control. PulseWave use: VWAP sets the trend foundation — we trade in the direction the price sits relative to VWAP. Step 2: MACD — Momentum Confirmation (Colors: Orange & Blue) What it does: MACD tracks momentum by comparing short-term and long-term moving averages, using the MACD line and a signal line to indicate shifts. Why it matters: When the MACD line (orange) crosses above the Signal line (blue), it signals rising momentum — a bullish cue. When the MACD line crosses below the signal line, it signals weakening momentum — bearish cue. PulseWave use: MACD confirms momentum that aligns with the VWAP trend before entering trades. Step 3: RSI — The Strength Filter (Color: Purple) What it does: The Relative Strength Index (RSI) measures how fast prices are changing to indicate overbought or oversold conditions. Why it matters: RSI above 70 = overbought (possible reversal or pause). RSI below 30 = oversold (potential bounce). PulseWave use: RSI filters out trades taken at extreme price levels, avoiding entries that are too stretched. Color-Coded Roadmap Summary: Step Indicator Role Buy Signal Sell Signal Color 1 VWAP Trend Direction Price > VWAP (bullish) Price < VWAP (bearish) Blue 2 MACD Momentum Confirmation MACD line crosses above Signal line MACD line crosses below Signal line Orange & Blue 3 RSI Entry Filter RSI < 70 (not overbought) RSI > 30 (not oversold) Purple How PulseWave Strategy Works: Buy when price sits above VWAP, MACD line crosses above the Signal line, and RSI is below 70. Sell (exit) when price drops below VWAP, MACD line crosses below the Signal line, and RSI is above 30. This layered approach ensures you only trade when trend, momentum, and strength align — reducing false signals and improving your edge. Why Use PulseWave Strategy? Clear & Simple: No guesswork — clear color-coded signals guide your decisions. Robust: Combines trend, momentum, and strength in one system. Versatile: Fits day trading and swing trading styles alike. Visual: Easily interpreted signals with minimal clutter.
Strategi Pine Script®
oleh Markking77
1
SwingTrade ADX Strategy v6This is a swing trading strategy that combines VWAP (Volume Weighted Average Price), ADX (Average Directional Index) for trend strength, and volume ratios to generate long/short entry and exit signals. It's designed for daily charts but can be adapted. #### Key Features: - **Entries**: Based on VWAP crossovers, rising/falling delta (price deviation from VWAP), ADX trend confirmation, and volume ratios. - **Exits**: Dynamic exits when VWAP delta reverses after a peak. - **Filters**: Optional toggles for VWAP signals, ADX, and volume. Backtest date range for custom periods. - **Visuals**: VWAP line, signal shapes/labels, and an info panel showing key metrics (VWAP Delta %, ADX, Volume Ratio). - **Alerts**: Built-in alerts for buy/sell entries and exits. #### How to Use: 1. Apply to your chart (e.g., stocks, forex, crypto). 2. Adjust parameters in the settings (e.g., ADX threshold, volume period). 3. Enable/disable indicators as needed. 4. Backtest using the date filters and review equity curve. **Disclaimer**: This is for educational purposes only. Past performance is not indicative of future results. Not financial advice—trade at your own risk. Backtest thoroughly and use with proper risk management. Feedback welcome! If you find it useful, give it a like.
Strategi Pine Script®
oleh TiamatCrypto
Intelligent Moving📘 Intelligent Moving – Adaptive Neural Trend Engine Intelligent Moving is an invite-only, closed-source indicator that dynamically adjusts itself to evolving market conditions using a built-in neural optimizer. It combines a custom adaptive Moving Average, ATR-based deviation bands, and a fully internal virtual trade simulator to deliver smart trend signals and automatic parameter tuning — all without repainting or manual intervention. This script is built entirely from original code and does not use any open-source components or built-in TradingView indicators. 🧠 Core Logic and Visual Structure The indicator plots: - A central moving average (optimized dynamically), - Upper and lower deviation bands based on ATR × adaptive coefficients, - Buy (aqua) and Sell (orange) arrows on reversion signals, - Color-coded trend zones based on price vs. moving average. All three bands change color in real time depending on the price’s position relative to the MA, clearly showing uptrends (e.g. blue) and downtrends (e.g. red). 📈 Signal Logic: Reversion from Extremes - Buy Signal: After price closes below the lower deviation band, it then closes back above it. - Sell Signal: After price closes above the upper deviation band, it then closes back below it. These signals are not based on crossovers, oscillators, or lagging logic — they are pure structure-based reversion entries, designed to detect exhaustion and reversal zones. 🤖 Built-In Neural Optimizer (Perceptron Engine) At the heart of Intelligent Moving lies a self-training engine that uses simulated (virtual) positions to test multiple configurations and pick the best one. Here’s how it works: 🔄 Virtual Trade Simulation At regular intervals (user-defined), the script: - Simulates virtual buy/sell positions based on its signal logic. - Applies virtual Stop-Loss (just beyond the signal zone) and virtual Take-Profit (when price crosses back over the MA). - Calculates simulated profit for each combination of: - - MA periods, - - Upper/lower ATR multipliers. 🧠 Neural Training Process - A perceptron-like engine evaluates the simulated results. - It selects the best-performing configuration and applies it to live plotting. - You can choose whether optimization uses a base value or the last best result from the previous training pass. This process runs forward-only and never overwrites history or uses future data. It's completely transparent and non-repainting. ⚙️ Customization and Parameters Users can control: - MA period range, step, and training type (base vs last best) - Deviation multiplier ranges and step - Training depth (number of bars in history) - Training interval (how often to retrain) - Spread simulation, alert options, and all visual settings 💡 What Makes It Unique - ✅ Self-optimization with virtual trades and perceptron logic - ✅ Adaptive deviation bands based on ATR (not standard deviation) - ✅ No built-in indicators, no repaints, no curve-fitting - ✅ Clear trend zones and reversal signals - ✅ Optimized for live use and consistent behavior across assets Unlike typical moving average tools, Intelligent Moving thinks, adapts, and reacts — turning a standard concept into a living, learning trend engine. 📊 Use Cases - Trend detection with adaptive coloring - Reversion trading from volatility extremes - Dynamic strategy building with minimal manual input - Alerts for automated or discretionary traders 🔒 Invite-Only Notice This script is invite-only and closed-source. The optimization logic, trade simulation system, and perceptron engine were developed from scratch, specifically for this indicator. No built-in functions (e.g. MA, BB, RSI) or public scripts were used or copied. All decisions and calculations are based on current and past price only — no repainting, retrofitting, or future leakage. ⚠️ Disclaimer This indicator is for educational and analytical use only. It does not predict future prices or guarantee profits. Always use appropriate risk management and test thoroughly before live trading.
Penunjuk Pine Script®
oleh trdngclbsmn
PRO Investing - Quant AlphaCentauri D |XLF|PRO Investing - Quant AlphaCentauri D |XLF| 1. Summary and Core Concept This is a quantitative backtesting strategy engineered specifically for the Financial Select Sector SPDR Fund (XLF) on the Daily (1D) timeframe. The name "AlphaCentauri" reflects its goal: to seek alpha by identifying statistically significant opportunities through rigorous time series analysis. The strategy's core principle is to move beyond conventional technical indicators and instead analyze the underlying structure and character of price data. It is designed to methodically identify conditions that have historically preceded sustained directional trends in the financial sector. 2. The Analytical Process: How It Works This strategy employs a multi-stage quantitative process to filter for high-probability setups. It is a "mashup" of statistical concepts applied to price action. Structural Pattern Recognition: The engine's primary function is to analyze the historical price series of XLF to identify specific, recurring structural patterns. It examines price geometry and cyclical behavior to find formations that often act as the foundation for a new, emerging trend. Signal Execution: A signal to enter a trade is only generated when the findings from both the structural analysis and the validation stages are in agreement. This disciplined, multi-layered approach ensures the strategy remains flat during periods of high uncertainty and only engages when its quantitative criteria are fully met. 3. How to Use This Strategy Timeframe: This strategy has been designed, tested, and optimized exclusively for the Daily (1D) timeframe on the XLF ticker. Its logic is not intended for other timeframes or assets and may produce unreliable results if used differently. On-Chart Signals: The strategy's operation is transparent. It plots all historical buy and sell entries, along with their corresponding exits, directly on the chart for easy performance review and analysis. 4. Risk Management: The Strategy's Foundation This strategy is built upon a foundation of strict, non-negotiable risk management, which is reflected in its code and backtesting parameters. This design complies with TradingView's guidelines for publishing realistic and responsible strategies. Dynamic Stop-Loss and Position Sizing: A stop-loss is dynamically calculated for each trade based on recent market volatility. The strategy then automatically adjusts the position size for that trade to target a defined risk percentage. In cases of extreme market volatility, the maximum potential loss on a single trade may approach, but is designed not to exceed, 5% of total account equity. Under normal market conditions, the risk for most trades will be below this maximum threshold. Realistic Backtesting Parameters: Initial Capital: The backtest defaults to an initial capital of $100,000. Commission: A realistic fee of $5.00 per order is included to simulate broker costs. 5. Disclaimer This strategy is an educational tool provided for informational and research purposes. It is not financial advice. All trading carries a high level of risk, and past performance is not a guarantee of future results. You are solely responsible for your own trading decisions and risk management. Always conduct your own due diligence before deploying any trading strategy in a live account.
Strategi Pine Script®
oleh PRO-Investing
DriftLine - Pivot Open Zones [SiDec]What is DriftLine? DriftLine is your visual roadmap for navigating the markets — designed for both day traders and swing traders who want to understand where price truly matters. It automatically plots the most meaningful price levels on your chart: dOpen → today’s open pdOpen → yesterday’s open bpdOpen → two days ago wOpen → this week’s open mOpen → this month’s open yOpen → this year’s open These are not just lines — they are the milestones big traders, funds, and algos watch to measure bias, performance, and momentum across timeframes. DriftLine also layers on: Fib zones (50%, 61.8%, 78.6%) between today’s and yesterday’s opens — highlighting natural pullback or continuation areas. Fade bands around monthly and yearly opens — showing where the market may be overextended, exhausted, or ripe for reversal. Optional % distance labels — letting you instantly see how stretched or compressed price is relative to key opens. How to Use DriftLine 1️⃣ Daily setups: Trade with the daily bias (dOpen vs. pdOpen). Use the fib pocket as a pullback zone or continuation platform. 2️⃣ Weekly trends: Watch wOpen breaks + retests — often the start of powerful multi-day moves. 3️⃣ Monthly & yearly pivots: Treat mOpen and yOpen as heavyweight macro levels — they shape sentiment and direction. 4️⃣ Fade bands: Spot reactions at the outer bands around mOpen and yOpen — these zones often mark where trends pause or reverse. Why Are Daily Opens So Important? Many traders overlook dOpen (today’s open), pdOpen (yesterday’s open) and bpdOpen (before previous daily open) — but they’re the heartbeat of intraday trading. Here’s why they matter: 🔷 Above dOpen → bullish bias. The market is paying more than it opened — intraday momentum leans long. 🔷 Below dOpen → bearish bias. We’re under today’s open — cautious, risk-off, or short setups. 🔷 pdOpen/bpdOpen as magnet & target. Even in strong trends, price often revisits yesterday’s open. It can act as support, resistance, or a key flip level. 🔷 The Fib pocket between dOpen and pdOpen. The 50–78.6% zone is a dynamic battleground. Watch for price to bounce, reverse, or break through here. In short: dOpen and pdOpen are your intraday compass, showing you whether you’re trading with or against the day’s flow. Why Are Monthly Opens So Powerful? The monthly open (mOpen) is a macro anchor for institutional traders. It answers: ✅ Are we green or red for the month? ✅ Are big funds defending long exposure, or trimming risk? 🔷 Above mOpen = bullish tone, momentum follows. 🔷 Below mOpen = caution, risk-off, defensive market. You’ll often see sharp reactions at mOpen — even when lower timeframes look messy. Aligning your intraday or swing trades with the monthly bias improves your edge dramatically. Why Is the Yearly Open (yOpen) Critical? The yearly open (yOpen) is the king of all opens — the most powerful macro line on the chart. Big funds, asset managers, and long-term traders benchmark everything against yOpen: 🔷 Above yOpen → bullish year tone. Funds are green on the year; dips are often bought aggressively. 🔷 Below yOpen → bearish year tone. Caution dominates; rallies tend to be sold or fade. 🔷 Sharp reactions at yOpen. Expect explosive moves or violent rejections when price approaches this level — it’s where macro players act. And when price hits the fade bands around yOpen? It's a prime territory for reversals or profit-taking. How to Add DriftLine to Your Chart ✅ Easiest way → Go to my TradingView profile, open the Scripts tab, and ⭐ Add to Favourites. Then, on your chart: 1️⃣ Click Indicators → Favourites → select DriftLine 2️⃣ Done — you’re live! Can I Customise It? Absolutely! You can: 🎨 Change line colours and thickness. 🎨 Pick fade band colours to match your theme. 🎨 Adjust fade zone width (e.g., 0.5% or 1%). 🎨 Toggle % distance labels on/off for a clean or detailed view. ⚡ Pro Tip: Use DriftLine With Confluence! ⚡ DriftLine is not a buy/sell signal tool. It’s your map — but you need your own compass. Combine it with: Fibonacci retracements & extensions Elliott Wave patterns Order flow or volume profile Momentum or trend indicators Other tools When multiple tools align at a DriftLine level, that’s where the magic happens — and where the highest-probability trades live. Key Takeaway DriftLine doesn’t predict the future — it frames the battlefield. It highlights where the real action is happening: Where price flips, where traders fight, and where momentum builds. Use it as your market map, combine it with your favourite strategies, and let it sharpen your decisions. 🌊 Read the currents. Trade the flow. Stay sharp, stay patient and trade with clarity. Happy trading!

Penunjuk Pine Script®
oleh SiDec
Monday Swing Box# Monday Swing Box Indicator - Trading Applications This "Monday Swing Box" indicator can be very useful in trading for several strategic reasons: ## 1. **"Monday Effect" Analysis** * **Concept**: Mondays often have particular characteristics in the markets (opening gaps, weekend catch-up, different volumes) * **Utility**: Allows visualization and quantification of these Monday-specific movements * **Application**: Helps identify recurring patterns in your strategy ## 2. **Relative Volatility Measurement with ATR** * **The ATR percentage tells you**: * **< 50%**: Low volatility Monday (possible consolidation) * **50-100%**: Normal volatility * **> 100%**: Very volatile Monday (important event, potential breakout) * **Advantage**: Contextualizes the movement relative to historical volatility ## 3. **Practical Trading Applications** ### **For Day Trading**: * **Entry**: A Monday with >150% ATR may signal a strong movement to follow * **Stop Loss**: Adjust stop sizes according to Monday's volatility * **Targets**: Calibrate targets according to the movement's magnitude ### **For Swing Trading**: * **Support/Resistance**: Monday's high/low often become key levels * **Breakout**: Breaking above/below Monday's box may signal continuation * **Retracement**: Return to Monday's box = support/resistance zone ### **For Risk Management**: * **Sizing**: Adapt position sizes according to measured volatility * **Timing**: Avoid trading abnormally volatile Mondays if you prefer stability ## 4. **Specific Possible Strategies** ### **"Monday Breakout"**: * Wait for a break above/below Monday's box * Enter in the direction of the breakout * Stop at the other end of the box ### **"Monday Reversal"**: * If Monday shows >200% ATR, look for a reversal * The box becomes a resistance/support zone ### **"Monday Range"**: * Trade bounces off the box limits * Particularly effective if ATR % is normal (50-100%) ## 5. **Visualization Advantages** * **Historical**: See past patterns across multiple Mondays * **Comparison**: Compare current volatility to previous Mondays * **Anticipation**: Prepare your strategy according to the type of Monday observed ## 6. **Limitations to Consider** * Monday patterns can vary according to markets and periods * Don't trade solely on this indicator, but use it as a complement * Consider macroeconomic context and news This indicator is therefore particularly useful for traders who want to exploit Monday's specificities and have an objective measure of this day's relative volatility compared to normal market conditions.
Penunjuk Pine Script®
oleh MrsLevarg
Contrarian Market Structure BreakMarket Structure Break application was inspired and adapted from Market Structure Oscillator indicator developed by Lux Algo. So much credit to their work. This indicator pairs nicely with the Contrarian 100 MA and can be located here: Indicator Description: Contrarian Market Structure BreakOverview The "Contrarian Market Structure Break" indicator is a versatile tool tailored for traders seeking to identify potential reversal opportunities by analyzing market structure across multiple timeframes. Built on Institutional Concepts of Structure (ICT), this indicator detects Break of Structure (BOS) and Change of Character (CHoCH) patterns across short-term, intermediate-term, and long-term swings, plotting them with customizable lines and labels. It generates contrarian buy and sell signals when price breaks key swing levels, with a unique "Blue Dot Tracker" to monitor consecutive buy signals for trend confirmation. Optimized for the daily timeframe, this indicator is adaptable to other timeframes with proper testing, making it ideal for traders of forex, stocks, or cryptocurrencies. How It Works The indicator combines three key components to provide a comprehensive view of market dynamics: Multi-Timeframe Market Structure Analysis: It identifies swing highs and lows across short-term, intermediate-term, and long-term periods, plotting BOS (continuation) and CHoCH (reversal) events with customizable line styles and labels. Contrarian Signal Generation: Buy and sell signals are triggered when the price crosses below swing lows (buy) or above swing highs (sell), indicating potential reversals in overextended markets. Blue Dot Tracker: A unique feature that counts consecutive buy signals ("blue dots") and highlights a "Hold Investment" state with a yellow background when three or more buy signals occur, suggesting a potential trend continuation. Signals are visualized as small circles below (buy) or above (sell) price bars, and a table in the bottom-right corner displays the blue dot count and recommended action (Hold or Flip Investment), enhancing decision-making clarity. Mathematical Concepts Swing Detection: The indicator identifies swing highs and lows by comparing price patterns over three bars, ensuring robust detection of pivot points. A swing high occurs when the middle bar’s high is higher than the surrounding bars, and a swing low occurs when the middle bar’s low is lower. Market Structure Logic: BOS is detected when the price breaks a prior swing high (bullish) or low (bearish) in the direction of the current trend, while CHoCH signals a potential reversal when the price breaks a swing level against the trend. These are calculated across three timeframes for a multi-dimensional perspective. Blue Dot Tracker: This feature counts consecutive buy signals and tracks the entry price. If three or more buy signals occur without a sell signal, the indicator enters a "Hold Investment" state, marked by a yellow background, until the price exceeds the entry price or a sell signal occurs. Entry and Exit Rules Buy Signal (Blue Dot Below Bar): Triggered when the closing price crosses below a swing low on either the intermediate-term or long-term timeframe, suggesting an oversold condition and potential reversal upward. Short-term signals can be enabled but are disabled by default to reduce noise. Sell Signal (White Dot Above Bar): Triggered when the closing price crosses above a swing high on either the intermediate-term or long-term timeframe, indicating an overbought condition and potential reversal downward. Blue Dot Tracker Logic: After a buy signal, the indicator increments a blue dot counter and records the entry price. If three or more consecutive buy signals occur (blueDotCount ≥ 3), the indicator enters a "Hold Investment" state, highlighted with a yellow background, suggesting a potential trend continuation. The "Hold Investment" state ends when the price exceeds the entry price or a sell signal occurs, resetting the counter. Exit Rules: Traders can exit buy positions when a sell signal appears, the price exceeds the entry price during a "Hold Investment" state, or based on additional confirmation from BOS/CHoCH patterns or other technical analysis tools. Always use proper risk management. Recommended Usage The indicator is optimized for the daily timeframe, where it effectively captures significant reversal and continuation patterns in trending or ranging markets. It can be adapted to other timeframes (e.g., 1H, 4H, 15M) with careful testing of settings, particularly enabling/disabling short-term structure analysis to suit market conditions. Backtesting is recommended to optimize performance for your chosen asset and timeframe. Customization Options Market Structure Display: Toggle short-term, intermediate-term, and long-term structures on or off, with customizable line styles (solid, dashed, dotted) and colors for bullish and bearish breaks. Labels: Enable or disable BOS/CHoCH labels for each timeframe to reduce chart clutter. Signal Visibility: Hide buy/sell signals if desired for a cleaner chart. Blue Dot Tracker: Monitor the blue dot count and action (Hold or Flip Investment) via the table display, which is fully customizable in terms of position and appearance. Why Use This Indicator? The "Contrarian Market Structure Break" indicator offers a robust framework for identifying high-probability reversal and continuation setups using ICT principles. Its multi-timeframe analysis, clear signal visualization, and innovative Blue Dot Tracker provide traders with actionable insights into market dynamics. Whether you're a swing trader or a day trader, this indicator’s flexibility and intuitive design make it a valuable addition to your trading arsenal. Note for TradingView Moderators This script complies with TradingView's House Rules by providing an educational and transparent description without performance claims or guarantees. It is designed to assist traders in technical analysis and should be used alongside proper risk management and personal research. The code is original, well-documented, and includes customizable inputs and clear visual outputs to enhance the user experience. Tips for Users: Backtest thoroughly on your chosen asset and timeframe to validate signal reliability. Combine with other indicators or price action analysis for confirmation of entries and exits. Adjust timeframe settings and enable/disable short-term structures to match market volatility and your trading style. Hope the "Contrarian Market Structure Break" indicator enhances your trading strategy and helps you navigate the markets with confidence! Happy trading!
Penunjuk Pine Script®
oleh chuckaschultz