Mulakan

Corak carta

MACD HTF Hardcoded (A/B Presets) + Regimes [CHE] MACD HTF Hardcoded (A/B Presets) + Regimes — Higher-timeframe MACD emulation with acceptance-based regime filter and on-chart diagnostics Summary This indicator emulates a higher-timeframe MACD directly on the current chart using two hardcoded preset families and a time-bucket mapping, avoiding cross-timeframe requests. It classifies four MACD regimes and applies an acceptance filter that requires several consecutive bars before a state is considered valid. A small dead-band around zero reduces noise near the axis. An on-chart table reports the active preset, the inferred time bucket, the resolved lengths, and the current regime. Pine version: v6 Overlay: false Primary outputs: MACD line, Signal line, Histogram columns, zero line, regime-change alert, info table Motivation: Why this design? Cross-timeframe indicators often rely on external timeframe requests, which can introduce repaint paths and added latency. This design provides a deterministic alternative: it maps the current chart’s timeframe to coarse higher-timeframe buckets and uses fixed EMA lengths that approximate those views. The dead-band suppresses flip-flops around zero, and the acceptance counter reduces whipsaw by requiring sustained agreement across bars before acknowledging a regime. What’s different vs. standard approaches? Baseline: Classical MACD with user-selected lengths on the same timeframe, or higher-timeframe MACD via cross-timeframe requests. Architecture differences: Hardcoded A and B length families with a bucket map derived from the chart timeframe. No `request.security`; all calculations occur on the current series. Regime classification from MACD and Histogram sign, gated by an acceptance count and a small zero dead-band. Diagnostics table for transparency. Practical effect: The MACD behaves like a slower, higher-timeframe variant without external requests. Regimes switch less often due to the dead-band and acceptance logic, which can improve stability in choppy sessions. How it works (technical) The script derives a coarse bucket from the chart timeframe using `timeframe.in_seconds` and maps it to preset-specific EMA lengths. EMAs of the source build MACD and Signal; their difference is the Histogram. Signs of MACD and Histogram define four regimes: strong bull, weak bull, strong bear, and weak bear. A small, user-defined band around zero treats values near the axis as neutral. An acceptance counter checks whether the same regime persisted for a given number of consecutive bars before it is emitted as the filtered regime. A single alert condition fires when the filtered regime changes. The histogram columns change shade based on position relative to zero and whether they are rising or falling. A persistent table object shows preset, bucket tag, resolved lengths, and the filtered regime. No cross-timeframe requests are used, so repaint risk is limited to normal live-bar movement; values stabilize on close. Parameter Guide Source — Input series for MACD — Default: Close — Using a smoother source increases stability but adds lag. Preset — A or B length family — Default: “3,10,16” — Switch to “12,26,9” for the classic family mapped to buckets. Table Position — Anchor for the info table — Default: Top right — Choose a corner that avoids covering price action. Table Size — Table text size — Default: Normal — Use small on dense charts, large for presentations. Dark Mode — Table theme — Default: Enabled — Match your chart background for readability. Show Table — Toggle diagnostics table — Default: Enabled — Disable for a cleaner pane. Zero dead-band (epsilon) — Noise gate around zero — Default: Zero — Increase slightly when you see frequent flips near zero. Acceptance bars (n) — Bars required to confirm a regime — Default: Three — Raise to reduce whipsaw; lower to react faster. Reading & Interpretation Histogram columns: Above zero indicates bullish pressure; below zero indicates bearish pressure. Darker shade implies the histogram increased compared with the prior bar; lighter shade implies it decreased. MACD vs. Signal lines: The spread corresponds to histogram height. Regimes: Strong bull: MACD above zero and Histogram above zero. Weak bull: MACD above zero and Histogram below zero. Strong bear: MACD below zero and Histogram below zero. Weak bear: MACD below zero and Histogram above zero. Table: Inspect active preset, bucket tag, resolved lengths, and the filtered regime number with its description. Practical Workflows & Combinations Trend following: Use strong bull to favor long exposure and strong bear to favor short exposure. Use weak states as pullback or transition context. Combine with structure tools such as swing highs and lows or a baseline moving average for confirmation. Exits and risk: In strong trends, consider exiting partial size on a regime downgrade to a weak state. In choppy sessions, increase the acceptance bars to reduce churn. Multi-asset / Multi-timeframe: Works on time-based charts across liquid futures, indices, currencies, and large-cap equities. Bucket mapping helps retain a consistent feel when moving from lower to higher timeframes. Behavior, Constraints & Performance Repaint/confirmation: No cross-timeframe requests; values can evolve intrabar and settle on close. Alerts follow your TradingView alert timing settings. Resources: `max_bars_back` is set to five thousand. Very large resolved lengths require sufficient history to seed EMAs; expect a warm-up period on first load or after switching symbols. Known limits: Dead-band and acceptance can delay recognition at sharp turns. Extremely thin markets or large gaps may still cause brief regime reversals. Sensible Defaults & Quick Tuning Start with preset “3,10,16”, dead-band near zero, and acceptance of three bars. Too many flips near zero: increase the dead-band slightly or raise the acceptance bars. Too sluggish in clean trends: reduce the acceptance bars by one. Too sensitive on fast lower timeframes: switch to the “12,26,9” preset family or raise the acceptance bars. Want less clutter: hide the table and keep the alert. What this indicator is—and isn’t This is a visualization and regime layer for MACD using higher-timeframe emulation and stability gates. It is not a complete trading system and does not generate position sizing or risk management. Use it with market structure, execution rules, and protective stops. Disclaimer The content provided, including all code and materials, is strictly for educational and informational purposes only. It is not intended as, and should not be interpreted as, financial advice, a recommendation to buy or sell any financial instrument, or an offer of any financial product or service. All strategies, tools, and examples discussed are provided for illustrative purposes to demonstrate coding techniques and the functionality of Pine Script within a trading context. Any results from strategies or tools provided are hypothetical, and past performance is not indicative of future results. Trading and investing involve high risk, including the potential loss of principal, and may not be suitable for all individuals. Before making any trading decisions, please consult with a qualified financial professional to understand the risks involved. By using this script, you acknowledge and agree that any trading decisions are made solely at your discretion and risk. Do not use this indicator on Heikin-Ashi, Renko, Kagi, Point-and-Figure, or Range charts, as these chart types can produce unrealistic results for signal markers and alerts. Best regards and happy trading Chervolino
Penunjuk Pine Script®
oleh chervolino
Multi-TF Gates (Labels + Alerts)//@version=6 indicator("PO9 – Multi-TF Gates (Labels + Alerts)", overlay=true, max_lines_count=500) iYear=input.int(2024,"Anchor Year",minval=1970) iMonth=input.int(11,"Anchor Month",minval=1,maxval=12) iDay=input.int(6,"Anchor Day",minval=1,maxval=31) useSymbolTZ=input.bool(true,"Use symbol's exchange timezone (syminfo.timezone)") tzChoice=input.string("Etc/UTC","Custom timezone (if not using symbol TZ)",options= ) anchorType=input.string("FX NY 17:00","Anchor at",options= ) showEvery=input.int(9,"Mark every Nth candle",minval=1) showD=input.bool(true,"Show Daily") show3H=input.bool(true,"Show 3H") show1H=input.bool(true,"Show 1H") show15=input.bool(true,"Show 15M") show5=input.bool(false,"Show 5M (optional)") colD=input.color(color.new(color.red,0),"Daily color") col3H=input.color(color.new(color.orange,0),"3H color") col1H=input.color(color.new(color.yellow,0),"1H color") col15=input.color(color.new(color.teal,0),"15M color") col5=input.color(color.new(color.gray,0),"5M color") styStr=input.string("dashed","Line style",options= ) lnW=input.int(2,"Line width",minval=1,maxval=4) extendTop=input.float(1.5,"ATR multiples above high",minval=0.1) extendBottom=input.float(1.5,"ATR multiples below low",minval=0.1) showLabels=input.bool(true,"Show labels") enableAlerts=input.bool(true,"Enable alerts") f_style(s)=>s=="solid"?line.style_solid:s=="dashed"?line.style_dashed:line.style_dotted var lines=array.new_line() f_prune(maxKeep)=> if array.size(lines)>maxKeep old=array.shift(lines) line.delete(old) tzEff=useSymbolTZ?syminfo.timezone:tzChoice anchorTs=anchorType=="FX NY 17:00"?timestamp("America/New_York",iYear,iMonth,iDay,17,0):timestamp(tzEff,iYear,iMonth,iDay,0,0) atr=ta.atr(14) f_vline(_color,_tf,_idx)=> y1=low-atr*extendBottom y2=high+atr*extendTop lid=line.new(x1=bar_index,y1=y1,x2=bar_index,y2=y2,xloc=xloc.bar_index,extend=extend.none,color=_color,style=f_style(styStr),width=lnW) if showLabels label.new(x=bar_index,y=high+(atr*2),text=_tf+" #"+str.tostring(_idx),xloc=xloc.bar_index,style=label.style_label_down,color=_color,textcolor=color.black) array.push(lines,lid) is_tf_open(tf)=> time==request.security(syminfo.tickerid,tf,time,barmerge.gaps_off,barmerge.lookahead_off) f_tf(_tf,_show,_color,_name)=> var bool started=false var int idx=0 isOpen=_show and is_tf_open(_tf) firstBar=isOpen and (time>=anchorTs) and (nz(time ,time)
Penunjuk Pine Script®
oleh austinkhaye
8x Heikin Ashi Streak (1m) by Bitcoin Benito🧭 Indicator Description: “8x Heikin Ashi Streak (1m) by Bitcoin Benito” **Purpose:** The *8x Heikin Ashi Streak* indicator helps traders quickly identify strong short-term momentum on the **1-minute timeframe**. It automatically tracks Heikin Ashi candles and alerts you whenever **8 consecutive bullish or bearish candles** appear — a visual cue that a strong intraday trend or exhaustion point might be forming. --- 🔍 **How It Works** * The indicator continuously counts Heikin Ashi candles in real-time. * When it detects **8 bullish (green)** or **8 bearish (red)** candles in a row: * A green ▲ marker appears **below** the 8th candle for bullish streaks. * A red ▼ marker appears **above** the 8th candle for bearish streaks. * You can set alerts to automatically notify you when these streaks occur. This makes it ideal for **momentum traders**, **scalpers**, and **trend-reversal spotters** who want to: * Catch strong intraday moves early. * Identify potential overextension zones before pullbacks. * Automate alert signals for short-term trading setups. IMPORTANT: Only trade when most of the 8 candles are below/above the EMA 8 Line respectively. Add an EMA 8 indicator to see if this is the case --- ⚙️ **How to Use** 1. **Apply to a 1-minute chart** (this script is optimized for 1m timeframes). 2. When the indicator plots a green or red triangle: * **Green triangle (8 bullish candles):** Trend momentum is strong upward. * **Red triangle (8 bearish candles):** Downward momentum is dominant. 3. Optionally, combine with volume or EMA filters to confirm breakouts or exhaustion. --- 🔔 **Setting Up Alerts** * Click the **Alert (🔔)** icon on TradingView. * Under *Condition*, select: * “8x Heikin Ashi Streak (1m)” → “8 Bullish Heikin Ashi (1m)” * OR “8x Heikin Ashi Streak (1m)” → “8 Bearish Heikin Ashi (1m)” * Choose **Once per bar close** to trigger the alert when the 8th candle completes. * Add your custom message, e.g. > “🚀 8 bullish Heikin Ashi candles in a row on 1-minute chart!” > “🔻 8 bearish Heikin Ashi candles in a row on 1-minute chart!” --- 📊 **Best Practices** * Works best on **liquid assets** (major forex pairs, indices, BTC/USD, etc.). * Pair with **RSI**, **EMA**, or **Volume** indicators for stronger confirmation. * Not a standalone buy/sell signal — treat it as a **momentum or exhaustion alert**. * Can be adapted to other timeframes by changing chart resolution. --- ⚠️ **Disclaimer** This indicator is for **educational and analytical purposes only**. Trading carries risk — always test on demo accounts and use proper risk management. No indicator guarantees profit; this is a tool for insight and timing, not financial advice.
Penunjuk Pine Script®
oleh rememberit1
Ripster Clouds (EMA + MTF)v6🧠 Purpose This indicator combines Ripster EMA Clouds and Multi-Timeframe (MTF) EMA Clouds into one script. It allows you to visualize short vs long exponential (or simple) moving averages as colored “clouds” to identify trend direction and momentum — across both your current timeframe and a higher timeframe (e.g., daily). ⚙️ Main Features 1. EMA Clouds (Local Timeframe) Up to 5 separate EMA/SMA cloud sets (8/9, 5/12, 34/50, 72/89, 180/200 by default). Each can be individually enabled/disabled in the settings. MA type toggle → Choose between EMA and SMA. Optional line display toggle for showing the short and long MA lines. Color-coded trend clouds: Greenish tones = bullish (short > long) Reddish tones = bearish (short < long) Configurable leading offset and global offset for alignment. 2. MTF Clouds (Higher Timeframe) Two sets of higher timeframe EMA clouds (default: 50/55 and 20/21). Uses request.security() to pull EMA data from a selected higher timeframe (default = Daily). Optional line visibility toggle (Display Lines). Blue and teal semi-transparent fills to distinguish from local clouds. Each MTF cloud can be toggled independently. 3. Unified Controls Master toggles: ✅ Show EMA Clouds ✅ Show MTF Clouds Transparent cloud fills with dynamically changing colors based on EMA crossovers and slope. No local-scope plot() or fill() calls — fully compliant with Pine v6 rules. 🎨 Color Logic Each EMA cloud uses a unique color pair (5 total). Cloud color changes dynamically based on whether the short EMA is above or below the long EMA. Line color changes with slope: Olive = EMA rising Maroon = EMA falling 📊 Technical Structure Written in Pine Script v6. All plot() and fill() calls are at global scope to prevent compilation errors. Uses helper functions only for math/color logic. Performance-optimized for TradingView’s rendering limits. 🧩 Quick Setup in TradingView Paste the script into the Pine Editor. Add to chart. In settings: Toggle on/off any EMA or MTF clouds. Adjust timeframe (Resolution), line visibility, or offsets. Choose EMA or SMA as the base calculation. ✅ Result You now have one unified, customizable Ripster EMA + MTF Cloud indicator, stable in Pine v6, with complete flexibility to toggle, style, and analyze multiple timeframe trends on a single chart.
Penunjuk Pine Script®
oleh chandrashekar_thippani
Buy/Sell Zones – TV Style//@version=5 indicator("Buy/Sell Zones – TV Style", overlay=true, timeframe="", timeframe_gaps=true) //===================== // الإعدادات //===================== len = input.int(100, "Length", minval=10) useATR = input.bool(true, "Use ATR (بدل الانحراف المعياري)") mult = input.float(2.0, "Band Multiplier", step=0.1) useRSI = input.bool(true, "تفعيل فلتر RSI") rsiOB = input.int(70, "RSI Overbought", minval=50, maxval=90) rsiOS = input.int(30, "RSI Oversold", minval=10, maxval=50) //===================== // القناة: أساس + انحراف //===================== basis = ta.linreg(close, len, 0) off = useATR ? ta.atr(len) * mult : ta.stdev(close, len) * mult upper = basis + off lower = basis - off // نطاق علوي/سفلي بعيد لعمل تعبئة المناطق lookback = math.min(bar_index, 500) topBand = ta.highest(high, lookback) + 50 * syminfo.mintick bottomBand = ta.lowest(low, lookback) - 50 * syminfo.mintick //===================== // الرسم //===================== pUpper = plot(upper, "Upper", color=color.new(color.blue, 0), linewidth=1) pLower = plot(lower, "Lower", color=color.new(color.red, 0), linewidth=1) pBasis = plot(basis, "Basis", color=color.new(color.gray, 60), linewidth=2) // تعبئة المناطق: فوق القناة (أزرق)، تحت القناة (أحمر) pTop = plot(topBand, display=display.none) pBottom = plot(bottomBand, display=display.none) fill(pUpper, pTop, color=color.new(color.blue, 80)) // منطقة مقاومة/بيع fill(pBottom, pLower, color=color.new(color.red, 80)) // منطقة دعم/شراء //===================== // خط أفقي من قمّة قريبة (يمثل مقاومة) – قريب من الخط المنقّط في الصورة //===================== resLen = math.round(len * 0.6) dynRes = ta.highest(high, resLen) plot(dynRes, "Recent Resistance", color=color.new(color.white, 0), linewidth=1) //===================== // إشارات BUY / SELL + فلتر RSI (اختياري) //===================== rsi = ta.rsi(close, 14) touchLower = ta.crossover(close, lower) or close <= lower touchUpper = ta.crossunder(close, upper) or close >= upper buyOK = useRSI ? (touchLower and rsi <= rsiOS) : touchLower sellOK = useRSI ? (touchUpper and rsi >= rsiOB) : touchUpper plotshape(buyOK, title="BUY", location=location.belowbar, style=shape.labelup, text="BUY", color=color.new(color.green, 0), textcolor=color.white, size=size.tiny, offset=0) plotshape(sellOK, title="SELL", location=location.abovebar, style=shape.labeldown, text="SELL", color=color.new(color.red, 0), textcolor=color.white, size=size.tiny, offset=0) // تنبيهات alertcondition(buyOK, title="BUY", message="BUY signal: price touched/closed below lower band (RSI filter may apply).") alertcondition(sellOK, title="SELL", message="SELL signal: price touched/closed above upper band (RSI filter may apply).")
Penunjuk Pine Script®
oleh opada_shawar11
Minimal Adaptive System v7 [MAS] - Refactor (No Repaint)🔹 Overview MAS v7 is the next evolution of the Minimal Adaptive System series. It analyzes trend, momentum, volatility and volume simultaneously, producing a single Adaptive Score (0–1) that automatically calibrates to market conditions. All signals are non-repainting, generated only on confirmed bars. ⸻ 🔹 Core Features • Adaptive Scoring Engine – Combines EMA, RSI, MACD, ADX and Volume into a dynamic score that shifts with volatility. • Volatility Awareness – ATR-based adjustment keeps thresholds proportional to market noise. • Trend Detection – Multi-EMA system identifies true direction and filter reversals. • Momentum Confirmation – RSI & MACD synchronization for higher-quality signals. • Dynamic Thresholds – Buy/Sell levels adapt to changing volatility regimes. • Minimal Dashboard – Clean, real-time panel displaying Trend Bias, RSI, Volume Ratio, ADX and Adaptive Score. • No Repaint Architecture – All conditions calculated from closed candles only. • Multi-Mode Ready – Works for Scalping, Swing or Position trading with sensitivity control. ⸻ 🔹 Signal Logic • Strong Buy → Adaptive Score crosses above 0.60 • Strong Sell → Adaptive Score crosses below 0.40 • Thresholds expand or contract automatically with volatility and sensitivity. ⸻ 🔹 Best Markets & Timeframes Designed for Crypto, Forex, Indices and Equities across all chart periods. Works especially well on 1H – 4H swing setups and 15 min intraday momentum trades. ⸻ 🔹 Risk Management Built-in ATR adaptive stops and targets adjust dynamically to volatility, offering consistent R:R behavior across different assets. ⸻ 🔹 Summary MAS v7 brings adaptive intelligence to technical trading. It doesn’t chase signals — it evolves with the market.
Penunjuk Pine Script®
oleh umutesenkal
Indian + Evening Session HighlighterThis indicator visually highlights two key trading windows for Indian instruments according to IST: Indian Session: 9:00 AM to 11:30 PM IST is shaded light orange on the chart, representing the main domestic trading hours for stocks, indices, commodities, or derivatives. Evening Session: 5:00 PM to 10:30 PM IST is shaded light red, marking the commonly followed evening window, which often captures the impact of US and European market movements. The indicator automatically overlays these session backgrounds on your chart, helping you quickly identify when price action occurs during India’s core and evening trade windows. This allows traders to focus on strategies specific to these time intervals, identify session-based volatility, and avoid trading during less active periods. If the evening session overlaps with the Indian session, the colors are layered for visual clarity.​ It is ideal for intraday traders, option strategists, and anyone monitoring Indian market rhythms or US-linked volatility impacts on Indian assets. No inputs are required; simply apply the script and view distinct session highlights for improved timing and decision making.
Penunjuk Pine Script®
oleh ShirishShringare
TFRSI & RSI Analog Dial [CHE] TFRSI & RSI Analog Dial — Interactive analog visualization for TFRSI or RSI with gradient zones, radial markers, and a trailing hand pointer. Summary This indicator renders an interactive analog dial for either TFRSI or standard RSI, providing a visual gauge with gradient-filled zones for oversold, neutral, and overbought regions. The hand pointer tracks the current value, with optional trailing dots at recent positions to show momentum direction. Radial lines mark key thresholds, and a digital readout displays the exact value. This design enhances readability over linear plots by leveraging familiar clock-like intuition, reducing cognitive load during quick scans. Signals are robust due to clamping to safe bounds and mode-specific scaling, ensuring consistent display across different volatility regimes. Motivation: Why this design? Traditional linear RSI or momentum indicators often feel abstract, especially in fast-paced screening where users scan multiple assets. Sharp swings can make thresholds hard to gauge at a glance, leading to missed nuances in overbought or oversold conditions. This dial addresses that by mapping values to a curved scale with color gradients, making extremes visually pop while the hand's trail hints at recent path without cluttering the chart. The dual-mode support allows seamless switching between advanced momentum (TFRSI) and classic RSI, fitting diverse strategies without reloading scripts. What’s different vs. standard approaches? - Baseline reference: Diverges from linear plotlines like the built-in RSI oscillator, which stacks values vertically and relies on horizontal lines for thresholds. - Architecture differences: - Curved projection with perspective tilt for depth illusion, using polyline arcs instead of straight plots. - Mode-aware clamping and scaling to handle TFRSI's extended range versus RSI's standard bounds. - Persistent trail array for hand history, capped at three points to avoid performance drag. - Gradient segmentation for smooth zone transitions, rendered via multiple thin polylines. - Practical effect: Charts show a compact, rotatable dial that fits in pane corners, with colors intuitively signaling bias (lime for buy zones, red for sell). The trail adds qualitative flow without numerical overload, helping spot divergences faster than static bars. How it works (technical) The indicator first computes the selected metric: for TFRSI, it processes price accelerations through a multi-step filter involving differencing, exponential damping, and normalization to a centered scale; for RSI, it uses the standard gain-loss ratio over the specified period. The value is then clamped between mode-specific minimum and maximum bounds to prevent display overflow. This clamped value drives the hand angle on a 300-degree arc, projected from a 3D-like model rotated for perspective. Arcs for zones are built as segmented polylines, with colors interpolated linearly across the gradient. Key levels are drawn as radial lines from inner to outer radius, colored by zone. The trail maintains up to three prior angles in an array, updated only on confirmed bars to avoid repainting, and rendered as sized dots fading from small to large. Initialization seeds filter states to zero on first bar, with persistent variables holding smoothing history. Data flows from price to metric computation, clamping, angle mapping, and projection—all executed globally on the last bar for redraw efficiency. Parameter Guide Mode — Switches between TFRSI (extended momentum gauge) and RSI (classic oscillator); affects bounds, zones, and labels. Default: "TFRSI". Trade-offs: TFRSI adds sensitivity to accelerations but may amplify noise; RSI is more stable for trend confirmation. Dial Size — Sets radius in pixels, scaling all elements proportionally. Default: 200. Bounds: 50–500. Tips: Larger for detailed views, smaller for multi-pane layouts; auto-scales hand length to match. Dial Vertical Offset — Shifts entire dial up/down in pixels. Default: 0. Bounds: -200–200. Trade-offs: Negative pulls toward price action; positive spaces below—use to avoid overlap. Camera Angle — Tilts view from top-down (0) to side (90) for 3D effect. Default: 45. Bounds: 0–90. Tips: Steeper angles emphasize depth but compress horizontally; flat for precision. Resolution — Polygon sides for smooth arcs. Default: 64. Bounds: 4–64. Trade-offs: Higher reduces jaggedness but increases draw calls—balance with pane zoom. TFRSI Hand Length — Base pointer length at 200px dial, auto-scaled. Default: 170. Bounds: 10–200. Tips: Longer for emphasis in large dials; shorter avoids edge clipping. Show TFRSI Hand — Toggles pointer visibility. Default: true. Trade-offs: Off for clean zones only; on for value tracking. Show Hand Trail Dots — Displays 3 fading dots at recent tips. Default: true. Trade-offs: Adds motion context but may clutter static views—disable in alerts. TFRSI Hand Color — Pointer hue, used for trail dots too. Default: 7E57C2. Tips: Match strategy theme; gradients auto-blend to zones. Dial Base Color — Arc outline/fill tint. Default: blue. Trade-offs: Opaque for contrast; transparent blends with background. Neutral Color (50) — Mid-zone shade. Default: gray. Tips: Neutral tones reduce bias in balanced markets. Oversold Color — Low-zone fill. Default: lime. Trade-offs: Bright for alerts; muted for subtlety. Overbought Color — High-zone fill. Default: red. Trade-offs: As above—pair with hand blending. Label Size — Text scaling for thresholds. Default: "normal". Options: tiny/small/normal/large/huge. Tips: Smaller for dense charts; larger for presentations. Digital TFRSI Size — Readout font. Default: "large". Options: as above. Trade-offs: Balances visibility without dominating dial. Digital Vertical Offset — Readout position shift. Default: -50. Bounds: -200–200. Tips: Negative centers above dial; adjust for multi-indicators. TFRSI Length — Core lookback for accelerations. Default: 6. Min: 1. Trade-offs: Shorter heightens reactivity, risks whipsaws; longer smooths extremes. TFRSI Trigger Length — Final smoothing passes. Default: 2. Min: 1. Tips: Increase for fewer false crosses; decrease for quicker pivots. RSI Length — Period for gain-loss averaging. Default: 14. Min: 1. Trade-offs: Classic 14 balances; shorter for scalps, longer for swings. Reading & Interpretation The dial arcs sweep from overbought (right, red) through neutral (top, gray) to oversold (left, lime), with the hand pointing to the current value—clockwise for rising, counterclockwise for falling. Trail dots grow larger toward the present, colored to match hand zones, indicating recent direction without numbers. Threshold lines thicken at center (50) for quick zeroing; labels confirm levels. Digital readout below shows precise value prefixed by mode. Hand color gradients from neutral to extremes signal building pressure verbally: deepening red warns of potential pullbacks, brightening lime suggests bounces. Practical Workflows & Combinations Trend following: Enter long when hand crosses above 50 from oversold trail; confirm with higher highs in price structure. Filter shorts below 50 in downtrends using volume spikes. Exits/Stops: Trail stops to recent dot positions in overbought; tighten on red gradients exceeding thresholds. Conservative: Exit at neutral; aggressive: Hold to extremes if trail aligns with momentum. Multi-asset/Multi-TF: Defaults suit forex/stocks on 1H–4H; for crypto, shorten lengths by 20% for volatility. Stack with HTF security calls (e.g., daily mode on 15m chart) for confluence—watch for alignment across dials. Behavior, Constraints & Performance Closed-bar updates ensure no repainting; live bars show provisional hand/trail, confirmed on close. No security or HTF calls, so zero lookahead bias. Resources: Caps at 500 lines/labels/polylines, rebuilds only on last bar; max_bars_back=2000 handles history without lag. Known limits: Trail may stutter in flat markets; gradients approximate smooth fills via segments, visible at low resolution. Sensible Defaults & Quick Tuning Start with TFRSI mode, length=6, trigger=2 for responsive momentum on daily charts. Too choppy? Bump trigger to 4 for stability. Lagging entries? Drop length to 4, watch for overreactions. For RSI trend filter, set length=21; combine with MA cross for entries when dial nears 30/70. What this indicator is—and isn’t This is a visualization layer for momentum gauges, aiding quick bias assessment and threshold spotting. Pair it with price action, volume, and risk rules for decisions. It’s not a standalone signal generator or predictive tool—values reflect past data, prone to whipsaws in ranging conditions. Disclaimer The content provided, including all code and materials, is strictly for educational and informational purposes only. It is not intended as, and should not be interpreted as, financial advice, a recommendation to buy or sell any financial instrument, or an offer of any financial product or service. All strategies, tools, and examples discussed are provided for illustrative purposes to demonstrate coding techniques and the functionality of Pine Script within a trading context. Any results from strategies or tools provided are hypothetical, and past performance is not indicative of future results. Trading and investing involve high risk, including the potential loss of principal, and may not be suitable for all individuals. Before making any trading decisions, please consult with a qualified financial professional to understand the risks involved. By using this script, you acknowledge and agree that any trading decisions are made solely at your discretion and risk. Do not use this indicator on Heikin-Ashi, Renko, Kagi, Point-and-Figure, or Range charts, as these chart types can produce unrealistic results for signal markers and alerts. Best regards and happy trading Chervolino
Penunjuk Pine Script®
oleh chervolino
AG_STRATEGY📈 AG_STRATEGY — Smart Money System + Sessions + PDH/PDL AG_STRATEGY is an advanced Smart Money Concepts (SMC) toolkit built for traders who follow market structure, liquidity and institutional timing. It combines real-time market structure, session ranges, liquidity levels, and daily institutional levels — all in one clean, professional interface. ✅ Key Features 🧠 Smart Money Concepts Engine Automatic detection of: BOS (Break of Structure) CHoCH (Change of Character) Dual structure system: Swing & Internal Historical / Present display modes Optional structural candle coloring 🎯 Liquidity & Market Structure Equal Highs (EQH) and Equal Lows (EQL) Marks strong/weak highs & lows Real-time swing confirmation Clear visual labels + smart positioning ⚡ Fair Value Gaps (FVG) Automatic bullish & bearish FVGs Higher-timeframe compatible Extendable boxes Auto-filtering to remove noise 🕓 Institutional Sessions Asia London New York Includes: High/Low of each session Automatic range plotting Session background shading London & NY Open markers 📌 PDH/PDL + Higher-Timeframe Levels PDH / PDL (Previous Day High/Low) Dynamic confirmation ✓ when liquidity is swept Multi-timeframe level support: Daily Weekly Monthly Line style options: solid / dashed / dotted 🔔 Built-in Alerts Internal & swing BOS / CHoCH Equal Highs / Equal Lows Bullish / Bearish FVG detected 🎛 Fully Adjustable Interface Colored or Monochrome visual mode Custom label sizes Extend levels automatically Session timezone settings Clean, modular toggles for each component 🎯 Designed For Traders Who Follow institutional order flow Enter on BOS/CHoCH + FVG + Liquidity sweeps Trade London & New York sessions Want structure and liquidity clearly mapped Prefer clean charts with full control 💡 Why AG_STRATEGY Stands Out ✔ Professional SMC engine ✔ Real-time swing & internal structure ✔ Session-based liquidity tracking ✔ Non-cluttered chart — high clarity ✔ Supports institutional trading workflows
Penunjuk Pine Script®
oleh agoney
Bitcoin CME gaps multi-timeframe auto finder1. Overview The Bitcoin CME Gap Multi-Timeframe Detector automatically identifies price gaps in the Bitcoin CME (Chicago Mercantile Exchange) futures market and visually displays them on the TradingView chart. Because the CME futures market closes for about an hour after each weekday session and remains closed over the weekend, price gaps frequently appear when trading resumes on Monday. This indicator analyzes gaps across six major timeframes, from 5-minute to 1-day charts, allowing traders to easily identify structural imbalances and potential support/resistance zones. It is the most accurate and feature-rich CME gaps indicator available on TradingView. 2. Key Features ■ Multi-Timeframe Gap Detection Analyzes 5m, 15m, 30m, 1h, 4h, and 1D charts simultaneously. This enables traders to observe both short-term volatility and mid-to-long-term structure, providing a multi-dimensional view of market dynamics. ■ Gap Direction Classification Up Gap: When the next candle’s open is higher than the previous candle’s high (default color: green tone) Down Gap: When the next candle’s open is lower than the previous candle’s low (default color: red tone) Gaps are color-coded to intuitively visualize potential support and resistance zones. ■ Highlight Function Gaps exceeding a user-defined threshold (%) are highlighted (default color: yellow). This helps quickly identify zones with abnormal volatility or sharp price dislocations. ■ Labels and Box Extension Each gap displays a percentage label indicating its relative size and significance. Gap zones are extended to the right as boxes, allowing traders to visually track when and how the gap gets filled over time. ■ Alert System When a gap forms on the selected timeframe (or across all timeframes), a TradingView alert is triggered. This enables real-time response to significant gap events. 3. Trading Strategies ■ Gap Fill Behavior CME gaps statistically tend to get filled over time. Gap boxes help distinguish between filled and unfilled gaps at a glance. Up Gap: Price tends to decline to fill the previous high–next open zone. Down Gap: Price often rises later to fill the previous low–next open zone. ■ Support & Resistance Levels Gap zones frequently act as strong support or resistance. When price retests a gap area, observing the reaction of buyers and sellers can provide valuable trading insights. Overlapping gap boxes across multiple timeframes indicate high-confidence support/resistance zones. ■ Market Sentiment & Volatility Analysis Large gaps usually result from shifts in market sentiment or major news events. This indicator allows traders to detect volatility spikes early and prepare for potential trend reversals. ■ Combination with Other Technical Tools While fully functional on its own, this indicator works even better when combined with tools like moving averages (MA), RSI, MACD, or Fibonacci retracements. For example, if the bottom of a gap coincides with the 0.618 Fibonacci level, it may signal a strong rebound zone. 4. Settings Options Minimum Gap % | Sets the minimum percentage movement required to detect a gap (lower values show smaller gaps) Display Timeframes | Choose which timeframes to display (5m, 15m, 30m, 1h, 4h, 1D) Box Colors | Assign colors for up and down gaps Box Extension (Bars) | Number of bars to extend gap boxes to the right Show Labels | Toggle display of gap percentage labels Label Position / Size | Adjust label position and size Highlight Gap ≥ % | Highlight gaps exceeding a specified percentage Highlight Colors | Set highlight color for labels and boxes Enable Alerts | Enable or disable alerts Alert Timeframe | Select timeframe(s) for alerts (“All” = all timeframes) 5. Summary This indicator is a professional trading tool that provides quantitative and visual analysis of price gaps in the Bitcoin CME futures market. By combining multi-timeframe detection, highlighting, and alert systems, it helps traders clearly identify zones of market imbalance and potential reversal areas.
Penunjuk Pine Script®
oleh BIGTAKER
3D Session Clock | Live Time with Sessions [CHE] 3D Session Clock | Live Time with Sessions — Projects a perspective clock face onto the chart to display current time and market session periods for enhanced situational awareness during trading hours. Summary This indicator renders a three-dimensional clock projection directly on the price chart, showing analog hands for hours, minutes, and seconds alongside a digital time readout. It overlays session arcs for major markets like New York, London, Tokyo, and Sydney, highlighting the active one with thicker lines and contrasting labels. By centralizing time and session visibility, it reduces the need to reference external clocks, allowing traders to maintain focus on price action while noting overlaps or transitions that influence volatility. The design uses perspective projection to simulate depth, making the clock appear tilted for better readability on varying chart scales. Sessions are positioned radially outward from the main clock, with the current time marker pulsing on the relevant arc. This setup provides a static yet live-updating view, confirmed on bar close to avoid intrabar shifts. Motivation: Why this design? Traders often miss subtle session shifts amid fast-moving charts, leading to entries during low-liquidity periods or exits before peak activity. Standard chart tools lack integrated time visualization, forcing constant tab-switching. This indicator addresses that by embedding a customizable clock with session rings, ensuring time context is always in view without disrupting workflow. What’s different vs. standard approaches? - Reference baseline: Traditional session highlighters use simple background fills or vertical lines, which clutter the chart and ignore global time zones. - Architecture differences: - Perspective projection rotates and scales points to mimic 3D depth, unlike flat 2D drawings. - Nested radial arcs for sessions, with dynamic radius assignment to avoid overlap. - Live time calculation adjusted for user-selected time zones, including optional daylight savings offset. - Practical effect: The tilted view prevents labels from bunching at chart edges, and active session emphasis draws the eye to liquidity hotspots, making multi-session overlaps immediately apparent for better timing. How it works (technical) The indicator calculates current time in the selected time zone by adjusting the system timestamp with a fixed offset, plus an optional one-hour bump for daylight savings. This yields hour, minute, and second values that drive hand positions: the hour hand advances slowly with fractional minute input, the minute hand ticks per 60 seconds, and the second hand sweeps fully each minute. Points for the clock face and arcs are generated as arrays of coordinates, transformed via rotation around the x-axis to apply tilt, then projected onto chart space using a scaling factor based on depth. Radial lines mark every hour from zero to 23, extending to the outermost session ring. Session arcs span user-defined hour ranges, drawn as open polylines with step interpolation for smoothness. On the last bar, all prior drawings are cleared, and new elements are added: filled clock circles, hand lines from center to tip, a small orbiting circle at the current time position, and centered labels for hours, sessions, and time. The active session is identified by checking if the current time falls within its range, then its arc thickens and label inverts colors. Initialization populates a timezone array once, with persistent bar time tracking for horizontal positioning. Parameter Guide Clock Size — Controls overall radius in pixels, affecting visibility on dense charts — Default: 200 — Larger values suit wide screens but may crowd small views; start smaller for mobile. Camera Angle — Sets tilt from top-down (zero) to side (90 degrees), altering projection depth — Default: 45 — Steeper angles enhance readability on sloped trends but flatten at extremes. Resolution — Defines polygon sides for circles and arcs, balancing smoothness and draw calls — Default: 64 — Higher improves curves on large clocks; lower aids performance on slow devices. Hour/Minute/Second Hand Length — Scales each hand from center, with seconds longest for precision — Defaults: 100/150/180 — Proportional sizing prevents overlap; shorten for compact layouts. Clock Base Color — Tints face and frame — Default: blue — Neutral shades reduce eye strain; match chart theme. Hand Colors — Assigns distinct hues to each hand — Defaults: red/green/yellow — High contrast aids quick scans; avoid chart-matching to stand out. Hour Label Size — Text scale for 1-12 markers — Default: normal — Larger for distant views, but risks clutter. Digital Time Size — Scale for HH:MM:SS readout — Default: large — Matches clock for balance; tiny for minimalism. Digital Time Vertical Offset — Shifts readout up (negative) or down — Default: -50 — Positions above clock to avoid hand interference. Timezone — Selects reference city/offset — Default: New York (UTC-05) — Matches trading locale; verify offsets manually. Summer Time (DST) — Adds one hour if active — Default: false — Enable for regions observing it; test transitions. Show/Label/Session/Color for Each Market — Toggles arc, sets name, time window, and hue per session (New York/London/Tokyo/Sydney) — Defaults: true/"New York"/1300-2200/orange, etc. — Customize windows to local exchange hours; colors differentiate overlaps. Reading & Interpretation The analog face shows a blue-tinted circle with white 1-12 labels and gray hour ticks; hands extend from center in assigned colors, pointing to current positions. A white dot with orbiting ring marks exact time on the session arc. Digital readout below displays padded HH:MM:SS in white on black. Active sessions glow with bold arcs and white labels on colored backgrounds; inactive ones use thin lines and colored text on light fills. Overlaps stack outward, with the innermost (New York) closest to the clock. If no session is active, the marker sits on the base ring. Practical Workflows & Combinations - Trend following: Enter longs during London-New York overlap (thicker dual arcs) confirmed by higher highs; filter with volume spikes. - Exits/Stops: Tighten stops pre-Tokyo open if arc thickens, signaling volatility ramp; trail during Sydney for overnight holds. - Multi-asset/Multi-TF: Defaults work across forex/stocks; on higher timeframes, enlarge clock size to counter bar spacing. Pair with session volume oscillators for confirmation. Behavior, Constraints & Performance Rendering occurs only on the last bar, using confirmed history for stable display; live bars update hands and marker without repainting prior elements. No security calls or higher timeframe fetches, so no lookahead bias. Resource limits include 2000 bars back for positioning, 500 each for lines, labels, and boxes—sufficient for full sessions without overflow. Arrays hold timezone data statically. On very wide charts, projection may skew slightly due to fixed scale. Known limits: Visual positioning drifts on extreme zooms; daylight savings assumes manual toggle, risking one-hour errors during changes. Sensible Defaults & Quick Tuning Start with New York timezone, 45-degree tilt, and all sessions enabled—these balance global coverage without clutter. For too-small visibility, bump clock size to 300 and resolution to 48. If labels overlap on narrow views, reduce hand lengths proportionally. To emphasize one session (e.g., London), disable others and widen its color contrast. For minimalism, set digital size to small and offset to -100. What this indicator is—and isn’t This is a visual time and session overlay to contextualize trading windows, not a signal generator or predictive tool. It complements price analysis and risk rules but requires manual interpretation. Use alongside order flow or momentum indicators for decisions. Disclaimer The content provided, including all code and materials, is strictly for educational and informational purposes only. It is not intended as, and should not be interpreted as, financial advice, a recommendation to buy or sell any financial instrument, or an offer of any financial product or service. All strategies, tools, and examples discussed are provided for illustrative purposes to demonstrate coding techniques and the functionality of Pine Script within a trading context. Any results from strategies or tools provided are hypothetical, and past performance is not indicative of future results. Trading and investing involve high risk, including the potential loss of principal, and may not be suitable for all individuals. Before making any trading decisions, please consult with a qualified financial professional to understand the risks involved. By using this script, you acknowledge and agree that any trading decisions are made solely at your discretion and risk. Do not use this indicator on Heikin-Ashi, Renko, Kagi, Point-and-Figure, or Range charts, as these chart types can produce unrealistic results for signal markers and alerts. Best regards and happy trading Chervolino Acknowledgments This indicator draws inspiration from the open-source contributions of the TradingView community, whose advanced programming techniques have greatly influenced its development. Special thanks to LonesomeTheBlue for the innovative polyline handling and midpoint centering techniques in RSI Radar Multi Time Frame: Gratitude also extends to LuxAlgo for the precise timezone calculations in Sessions: Finally, appreciation to TradingView for their comprehensive documentation on polyline features, including the support article at www.tradingview.com and the blog post at www.tradingview.com These resources were instrumental in implementing smooth, dynamic drawings.
Penunjuk Pine Script®
oleh chervolino
Squeeze Momentum ProSQUEEZE MOMENTUM PRO - Enhanced Visual Dashboard A modernized version of the TTM Squeeze Momentum indicator, designed for cleaner visual interpretation and faster decision-making. ═══════════════════════════════════════════ 📊 WHAT IS THE SQUEEZE? ═══════════════════════════════════════════ The "squeeze" occurs when Bollinger Bands contract inside Keltner Channels, indicating extremely low volatility. This compression typically precedes explosive directional moves - the tighter the squeeze, the bigger the potential breakout. John Carter's TTM Squeeze concept (from "Mastering the Trade") combines this volatility compression with momentum direction to identify high-probability setups. ═══════════════════════════════════════════ ✨ WHAT'S NEW IN THIS VERSION ═══════════════════════════════════════════ 🎯 VISUAL STATUS BAR - Real-time squeeze state with clear labels - Color-coded backgrounds (Red = Building, Green = Fired Bullish, Orange = Fired Bearish) - Squeeze duration counter to gauge compression time 📊 ENHANCED HISTOGRAM - 4-color momentum gradient (Strong Bull/Weak Bull/Weak Bear/Strong Bear) - Instantly shows both direction AND strength - Background shading for current market state 🔥 SQUEEZE INTENSITY GAUGE - 5-dot pressure indicator showing compression tightness - Percentage display of squeeze strength - Only appears during active squeezes 📈 REAL-TIME METRICS PANEL - Current momentum value - Direction indicator (increasing/decreasing) - Strength assessment (strong/weak) 🔔 COMPREHENSIVE ALERTS - Squeeze started - Squeeze fired (bullish/bearish) - Momentum crossovers ═══════════════════════════════════════════ 🎮 HOW TO USE ═══════════════════════════════════════════ 1. WAIT FOR SQUEEZE • Red status bar appears • Intensity dots show compression level • Longer duration = potentially bigger move 2. WATCH FOR RELEASE • Status changes to "FIRED - BULLISH" or "FIRED - BEARISH" • Histogram color confirms momentum direction • Background highlights the event 3. MANAGE POSITION • Monitor momentum strength in metrics panel • Exit when histogram changes color (momentum reversal) • Use with trend/volume confirmation ═══════════════════════════════════════════ ⚙️ CUSTOMIZATION ═══════════════════════════════════════════ - Toggle status bar, metrics, intensity dots independently - Adjustable BB/KC parameters - Custom color schemes - Show/hide squeeze duration ═══════════════════════════════════════════ 🙏 CREDITS ═══════════════════════════════════════════ Original TTM Squeeze concept: John F. Carter Original indicator code: LazyBear (@LazyBear) This builds on LazyBear's excellent implementation of the TTM Squeeze Momentum indicator, adding modern visual elements and real-time dashboards for improved usability. Original indicator: "Squeeze Momentum Indicator " ═══════════════════════════════════════════ ⚠️ DISCLAIMER ═══════════════════════════════════════════ This indicator is for educational purposes. Always use proper risk management and combine with other forms of analysis. No indicator guarantees profitable trades. ═══════════════════════════════════════════ Best used on: Day trading timeframes (1m-15m) for momentum plays Combine with: Volume analysis, trend filters, support/resistance levels
Penunjuk Pine Script®
oleh pitretmed
ProScalper📊 ProScalper - Professional 1-Minute Scalping System 🎯 Overview ProScalper is a sophisticated, multi-confluence scalping indicator designed specifically for 1-minute chart trading. Combining advanced technical analysis with intelligent signal filtering, it provides high-probability trade setups with clear entry, stop loss, and take profit levels. ✨ Key Features 🔺 Smart Signal Detection Range Filter Technology: Fast-responding trend detection (25-period) optimized for 1-minute timeframe Medium-sized triangles appear above/below candles for clear buy/sell signals Only most recent signal shown - no chart clutter Automatically deletes old signals when new ones appear 📋 Real-Time Signal Table Top-center display shows complete trade breakdown Grade system: A+, A, B+, B, C+ ratings for every setup All confluence reasons listed with checkmarks Score and R:R displayed for instant trade quality assessment Color-coded: Green for LONG, Red for SHORT 📐 Multi-Confluence Analysis ProScalper combines 10+ technical factors: ✅ EMA Trend: 4 EMAs (200, 48, 13, 8) for multi-timeframe alignment ✅ VWAP: Dynamic support/resistance ✅ Fibonacci Retracement: Golden ratio (61.8%), 50%, 38.2%, 78.6% ✅ Range Filter: Adaptive trend confirmation ✅ Pivot Points: Smart reversal detection ✅ Volume Analysis: Spike detection and volume profile ✅ Higher Timeframe: 5-minute trend confirmation ✅ HTF Support/Resistance: Key levels from higher timeframes ✅ Liquidity Sweeps: Smart money detection ✅ Opening Range Breakout: First 15-minute range 💰 Complete Trade Management Entry Lines: Dashed green (LONG) or red (SHORT) showing exact entry Stop Loss: Red dashed line with price label Take Profit: Blue dashed line with price label and R:R Partial Exits: 1R level marked with orange dashed line All lines extend 10 bars for clean alignment with Fibonacci levels 📊 Dynamic Risk/Reward Adaptive R:R calculation based on market volatility Targets adjusted for pivot distances Minimum 1.2:1 to maximum 3.5:1 for scalping Position sizing based on account risk percentage 🎨 Professional Visualization Clean chart layout - no clutter, only essential information Custom EMA colors: Red (200), Aqua (48), Green (13), White (8) Gold VWAP line for key support/resistance Color-coded Fibonacci: Bright yellow (61.8%), white (50%), orange (38.2%), fuchsia (78.6%) No shaded zones - pure price action focus 📈 Performance Tracking Real-time statistics table (optional) Win rate, total trades, P&L tracking Average R:R and win/loss ratios Setup-specific performance metrics ⚙️ Settings & Customization Risk Management Adjustable account risk per trade (default: 0.5%) ATR-based stop loss multiplier (default: 0.8 for tight scalping) Dynamic position sizing Signal Sensitivity Confluence Score Threshold: 40-100 (default: 55 for balanced signals) Range Filter Period: 25 bars (fast signals for 1-min) Range Filter Multiplier: 2.2 (tighter bands for more signals) Visual Controls Toggle signal table on/off Show/hide Fibonacci levels Control EMA visibility Adjust table text size Partial Exits 1R: 50% (default) 2R: 30% (default) 3R: 20% (default) Fully customizable percentages Trailing Stops ATR-Based (best for scalping) Pivot-Based EMA-Based Breakeven trigger at 0.8R 🎯 Best Use Cases Ideal For: ✅ 1-minute scalping on liquid instruments ✅ Day traders looking for quick 2-8 minute trades ✅ High-frequency trading with 8-15 signals per session ✅ Trending markets where Range Filter excels ✅ Crypto, Forex, Futures - works on all liquid assets Trading Style: Timeframe: 1-minute (can work on 3-5 min with adjusted settings) Hold Time: 3-8 minutes average Target: 1.2-3R per trade Frequency: 8-15 signals per day Win Rate: 45-55% (with proper risk management) 📋 How to Use Step 1: Wait for Signal Watch for green triangle (BUY) or red triangle (SELL) Signal table appears at top center automatically Step 2: Review Confluence Check grade (prefer A+, A, B+ for best quality) Review all reasons listed in table Confirm score is above your threshold (55+ recommended) Note the R:R ratio Step 3: Enter Trade Enter at current market price Set stop loss at red dashed line Set take profit at blue dashed line Mark 1R level (orange line) for partial exit Step 4: Manage Trade Exit 50% at 1R (orange line) Move to breakeven after 0.8R Trail remaining position using your chosen method Exit fully at TP or opposite signal 🎨 Chart Setup Recommendations Optimal Display: Timeframe: 1-minute Chart Type: Candles or Heikin Ashi Background: Dark theme for best color visibility Volume: Enable volume bars below chart Complementary Indicators (optional): Order flow/Delta for institutional confirmation Market profile for key levels Economic calendar for news avoidance ⚠️ Important Notes Risk Disclaimer: Not financial advice - for educational purposes only Always use proper risk management (0.5-1% per trade max) Past performance doesn't guarantee future results Test on demo account before live trading Best Practices: ✅ Trade during high liquidity hours (9:30-11 AM, 2-4 PM EST) ✅ Avoid news events and market open/close (first/last 2 minutes) ✅ Use tight stops (0.8-1.0 ATR) for 1-minute scalping ✅ Take partial profits quickly (1R = 50% off) ✅ Respect max daily loss limits (3% recommended) ✅ Focus on A and B grade setups for consistency What Makes This Different: 🎯 Complete system - not just signals, but full trade management 📊 Multi-confluence - 10+ factors analyzed per trade 🎨 Professional visualization - clean, focused chart design ⚡ Optimized for 1-min - settings specifically tuned for fast scalping 📋 Transparent reasoning - see exactly why each trade was taken 🏆 Grade system - instantly know trade quality 🔧 Technical Details Pine Script Version: 5 Overlay: Yes (plots on price chart) Max Lines: 500 Max Labels: 100 Non-repainting: All signals confirmed on bar close Alerts: Compatible with TradingView alerts 📞 Support & Updates This indicator is actively maintained and optimized for 1-minute scalping. Settings can be adjusted for different timeframes and trading styles, but default configuration is specifically tuned for high-frequency 1-minute scalping. 🚀 Get Started Add ProScalper to your 1-minute chart Adjust settings to your risk tolerance Wait for signals (green/red triangles) Follow the signal table guidance Manage trades using provided levels Track performance with stats table Happy Scalping! 📊⚡💰
Penunjuk Pine Script®
oleh Prospecttrades