Black FridayDISKAUN sehingga 80%

Penunjuk dan strategi

Market Energy & Direction DashboardMarket Energy & Direction Dashboard - Daytrading Overview A comprehensive real-time market internals dashboard that combines NYSE TICK, NYSE Advance-Decline (ADD) momentum, VIX direction, and relative volume into a single visual traffic light system with intelligent signal synthesis. Designed for active daytraders who need instant confirmation of market direction and energy based on momentum alignment across all major internals. What It Does This indicator synthesizes multiple market internals using directional momentum analysis rather than static thresholds to provide clear, actionable signals: • Traffic Light System: Single glance confirmation of market state o Bright Green: Maximum bullish - all internals aligned (TICK + ADD rising + VIX falling + volume) o Bright Red: Maximum bearish - all internals aligned (TICK + ADD falling + VIX rising + volume) o Yellow: Exhaustion warning - TICK at extremes, potential reversal imminent o Moderate Colors: Partial alignment - some confirmation but not complete o Gray: Choppy, neutral, or conflicting signals • Real-Time Dashboard displays: o Current TICK value with exhaustion warnings o Current ADD with directional momentum indicator (↑ rising = breadth improving, ↓ falling = breadth deteriorating, ± compression) o VIX level with directional indicator (↓ declining = bullish, ↑ rising = bearish, ± compression = neutral) o Relative volume (current vs 20-period average) o Composite status message synthesizing all data into clear directional summary Key Features ✓ Momentum-based analysis - all indicators show direction/change, not just levels ✓ Intelligent signal hierarchy from "Maximum" to "Moderate" based on internal alignment ✓ ADD directional momentum - catches breadth shifts early, works in all market conditions ✓ VIX directional analysis - shows if fear is increasing, decreasing, or stagnant ✓ Color-coded traffic light for instant decision making ✓ Detects TICK/ADD divergences (conflicting signals = caution) ✓ Exhaustion warnings at extreme TICK levels (±1000+) ✓ Composite status messages - "Maximum Bull", "Strong Bull", "Moderate Bull", etc. ✓ Customizable thresholds for all parameters ✓ Moveable dashboard (9 position options) ✓ Built-in alerts for all signal strengths, exhaustion, and divergences How To Use Setup: 1. Add indicator to your main trading chart (SPY, ES, NQ, etc.) 2. Default settings work well for most traders, but you can customize: o TICK Extreme Level (default 1000) o ADD Compression Threshold (default 100 - detects when breadth is stagnant) o VIX Elevated Level (default 20) o VIX Compression Threshold (default 2% - detects low volatility) o Volume Threshold (default 1.5x average) 3. Position dashboard wherever convenient on your chart Reading The Signals: Signal Hierarchy (Strongest to Weakest): MAXIMUM SIGNALS ⭐ (Brightest colors - All 4 internals aligned) • "✓ MAXIMUM BULL": TICK bullish + ADD rising (↑) + VIX falling (↓) + Volume elevated o This is the holy grail setup - all momentum aligned, highest conviction longs • "✓ MAXIMUM BEAR": TICK bearish + ADD falling (↓) + VIX rising (↑) + Volume elevated o Perfect storm bearish - all momentum aligned, highest conviction shorts STRONG SIGNALS (Bright colors - Core internals aligned) • "✓ STRONG BULL": TICK bullish + ADD rising (↑) o Strong confirmation even without VIX/volume - breadth supporting the move • "✓ STRONG BEAR": TICK bearish + ADD falling (↓) o Strong confirmation - both momentum and breadth deteriorating MODERATE SIGNALS (Faded colors - Partial confirmation) • "MODERATE BULL": TICK bullish but ADD not confirming direction o Proceed with caution - momentum present but breadth questionable • "MODERATE BEAR": TICK bearish but ADD not confirming direction o Proceed with caution - selling but breadth not fully participating WARNING SIGNALS • "⚠ EXHAUSTION" (Yellow): TICK at ±1000+ extremes o Potential reversal zone - prepare to fade or take profits o Often marks blow-off tops or capitulation bottoms NEUTRAL/AVOID • "CHOPPY/NEUTRAL" (Gray): Conflicting signals or low conviction o Stay out or reduce size significantly Individual Indicator Interpretation: TICK: • Green: Bullish momentum (>+300) • Red: Bearish momentum (<-300) • Yellow: Exhaustion (±1000+) • Gray: Neutral ADD (Advance-Decline): • Green (↑): Breadth improving - more stocks participating in the move • Red (↓): Breadth deteriorating - fewer stocks participating • Gray (±): Breadth stagnant - no clear participation trend VIX: • Green (↓): Fear declining - healthy environment for rallies • Red (↑): Fear rising - risk-off mode, supports downward moves • Gray (±): Volatility compression - often precedes explosive moves Volume: • Green: High conviction (>1.5x average) • Gray: Low conviction Trading Strategy: 1. Wait for "MAXIMUM" or "STRONG" signals for highest probability entries o Maximum signals = go full size with confidence o Strong signals = good conviction, normal position sizing 2. Confirm directional alignment: o For longs: Want ADD ↑ (rising) and VIX ↓ (falling) o For shorts: Want ADD ↓ (falling) and VIX ↑ (rising) 3. Use exhaustion warnings (yellow) to: o Take profits on existing positions o Prepare counter-trend entries o Tighten stops 4. Avoid "MODERATE" signals unless you have strong conviction from other analysis o These work best as confirmation for existing setups o Not strong enough to initiate new positions alone 5. Never trade "CHOPPY/NEUTRAL" signals o Gray means stay out - preserve capital o Wait for clear alignment 6. Watch for divergences: o Price making new highs but ADD ↓ (falling) = distribution warning o Price making new lows but ADD ↑ (rising) = potential bottom o Divergence alert will notify you Best Practices: • Use on 1-5 minute charts for daytrading • Combine with your price action or technical setup (support/resistance, trendlines, patterns) • The dashboard confirms when to take your setup, not what setup to take • Most effective during regular market hours (9:30 AM - 4:00 PM ET) when volume is present • The strongest edge comes from "MAXIMUM" signals - wait for these for best risk/reward • Pay special attention to ADD direction - it's the most predictive breadth indicator • VIX compression (gray ±) often signals upcoming volatility expansion - prepare for bigger moves Customization Option All thresholds are adjustable in settings: • TICK Extreme: Higher = fewer exhaustion warnings (try 1200-1500 for less sensitivity) • ADD Compression Threshold: Change detection sensitivity o Default 100 = balanced o Lower (50) = more sensitive to small breadth changes o Higher (200-300) = only shows major breadth shifts • VIX Elevated: Adjust for current volatility regime (15-25 typical range) • VIX Compression Threshold: o Default 2% = balanced o Lower (0.5-1%) = catches subtle VIX changes o Higher (3-5%) = only shows significant VIX moves • Volume Threshold: Lower for quieter stocks/times, higher for more confirmation Alerts Available • Maximum Bullish: All 4 internals aligned bullish (TICK + ADD↑ + VIX↓ + Volume) • Maximum Bearish: All 4 internals aligned bearish (TICK + ADD↓ + VIX↑ + Volume) • Strong Bullish: TICK bullish + ADD rising • Strong Bearish: TICK bearish + ADD falling • Exhaustion Warning: TICK at extreme levels • Divergence Warning: TICK and ADD directions conflicting Understanding the Signal Synthesis The indicator uses intelligent logic to combine all internals: "MAXIMUM" Signals require: • TICK direction (bullish/bearish) • ADD momentum (rising/falling) in same direction • VIX direction (falling for bulls, rising for bears) • Volume elevated (>1.5x average) "STRONG" Signals require: • TICK direction (bullish/bearish) • ADD momentum (rising/falling) in same direction • (VIX and volume are bonuses but not required) "MODERATE" Signals: • TICK showing direction • But ADD not confirming or contradicting • Weakest actionable signal This hierarchy ensures you know exactly how much conviction the market has behind any move. Technical Details • Pulls real-time data from NYSE TICK (USI:TICK), NYSE ADD (USI:ADD), and CBOE VIX • ADD direction calculated using bar-to-bar change with compression detection • VIX direction calculated using bar-to-bar percentage change • Volume calculation uses 20-period simple moving average • Dashboard updates every bar • No repainting - all calculations based on closed bar data Who This Is For • Active daytraders of stocks, futures (ES/NQ), and options • Scalpers needing quick directional confirmation with multiple internal alignment • Swing traders looking to time intraday entries with maximum confluence • Volatility traders who monitor VIX behavior • Market makers and professionals who trade based on breadth and internals • Anyone who monitors market internals but wants intelligent synthesis vs raw data Tips For Success Trading Philosophy: • Quality over quantity - wait for "MAXIMUM" signals for best results • One "MAXIMUM" signal trade is worth five "MODERATE" signal trades • Gray/neutral is not a sign of missing opportunity - it's protecting your capital Signal Confidence Levels: 1. MAXIMUM (95%+ confidence) - Trade these aggressively with full size 2. STRONG (80-85% confidence) - Trade these with normal position sizing 3. MODERATE (60-70% confidence) - Only if confirmed by strong technical setup 4. CHOPPY/NEUTRAL - Do not trade, wait for clarity Advanced Techniques: • Breadth divergences: Watch for price making new highs while ADD shows ↓ (falling) = major warning • VIX/Price divergences: Rallies with rising VIX (↑) are usually false moves • Volume confirmation: "MAXIMUM" signals with 2x+ volume are the absolute best • Compression zones: When both ADD and VIX show compression (±), expect explosive breakout soon • Sequential signals: Back-to-back "MAXIMUM" signals in same direction = strong trending day Common Patterns: • Opening surge with "MAXIMUM BULL" that shifts to "EXHAUSTION" (yellow) = fade the high • Selloff with "MAXIMUM BEAR" followed by ADD ↑ (rising) divergence = potential reversal • Choppy morning followed by "MAXIMUM" signal afternoon = best trending opportunity Example Scenarios Perfect Bull Entry: • Bright green signal box • TICK: +650 • ADD: +1200 (↑) • VIX: 18.30 (↓) • Volume: 2.3x • Status: "✓ MAXIMUM BULL" → ALL SYSTEMS GO - Take aggressive long positions Strong Bull (Good Confidence): • Green signal box (slightly less bright) • TICK: +500 • ADD: +800 (↑) • VIX: 19.50 (±) • Volume: 1.2x • Status: "✓ STRONG BULL" → Good long setup - breadth confirming even without VIX/volume Caution Bull (Moderate): • Faded green signal box • TICK: +400 • ADD: +900 (↓) • VIX: 20.10 (↑) • Volume: 0.9x • Status: "MODERATE BULL" → CAUTION - TICK bullish but breadth deteriorating and VIX rising = weak rally Exhaustion Warning: • Yellow signal box • TICK: +1350 ⚠ • ADD: +2100 (↑) • VIX: 17.20 (↓) • Volume: 1.8x • Status: "⚠ EXHAUSTION" → Take profits or prepare to fade - TICK overextended despite good internals Divergence Setup (Potential Reversal): • Faded green signal • TICK: +300 • ADD: +1800 (↓) • VIX: 21.50 (↑) • Volume: 1.6x • Status: "MODERATE BULL" → WARNING - Price rallying but breadth collapsing and fear rising = distribution Perfect Bear Entry: • Bright red signal box • TICK: -780 • ADD: -1600 (↓) • VIX: 24.80 (↑) • Volume: 2.5x • Status: "✓ MAXIMUM BEAR" → Perfect short setup - all momentum bearish with conviction Compression (Wait Mode): • Gray signal box • TICK: +50 • ADD: -200 (±) • VIX: 16.40 (±) • Volume: 0.7x • Status: "CHOPPY/NEUTRAL" → STAY OUT - Volatility compression, no conviction, await breakout Performance Optimization Best Market Conditions: • Works excellent in trending markets (up or down) • Particularly powerful during high-volume sessions (first/last hours) • "MAXIMUM" signals most reliable during 9:45-11:00 AM and 2:00-3:30 PM ET Less Effective During: • Lunch period (11:30 AM - 1:30 PM) - lower volume reduces signal quality • Low-volatility environments - compression signals dominate • Major news events in first 5 minutes - wait for internals to stabilize Recommended Use Cases: • Scalping: Trade only "MAXIMUM" signals for quick 5-15 minute moves • Daytrading: Use "MAXIMUM" and "STRONG" signals for position entries • Swing entries: Use "MAXIMUM" signals for optimal intraday entry timing • Exit timing: Use "EXHAUSTION" (yellow) warnings to take profits ________________________________________ Pro Tip: Create a dedicated workspace with this indicator on SPY/ES/NQ charts. Set alerts for "MAXIMUM BULL", "MAXIMUM BEAR", and "EXHAUSTION" signals. Most professional traders only trade the "MAXIMUM" setups and ignore everything else - this alone can dramatically improve win rates.
Penunjuk Pine Script®
oleh BlouToro
bows//@version=5 indicator("NQ EMA+RSI+ATR Alerts with SL/TP", overlay=true, shorttitle="NQ Alerts SLTP") // === Inputs ===a fastLen = input.int(9, "Fast EMA", minval=1) slowLen = input.int(21, "Slow EMA", minval=1) rsiLen = input.int(14, "RSI Length", minval=1) rsiLongMax = input.int(70, "Max RSI to allow LONG", minval=50, maxval=90) rsiShortMin = input.int(30, "Min RSI to allow SHORT", minval=10, maxval=50) atrLen = input.int(14, "ATR Length", minval=1) atrMultSL = input.float(1.5, "ATR Stop-Loss Multiplier", step=0.1) atrMultTP = input.float(2.5, "ATR Take-Profit Multiplier", step=0.1) // === Indicator calculations === price = close fastEMA = ta.ema(price, fastLen) slowEMA = ta.ema(price, slowLen) rsiVal = ta.rsi(price, rsiLen) atr = ta.atr(atrLen) // === Entry signals === longSignal = ta.crossover(fastEMA, slowEMA) and rsiVal < rsiLongMax shortSignal = ta.crossunder(fastEMA, slowEMA) and rsiVal > rsiShortMin // === SL/TP Levels === longSL = price - atr * atrMultSL longTP = price + atr * atrMultTP shortSL = price + atr * atrMultSL shortTP = price - atr * atrMultTP // === Plotting === plot(fastEMA, color=color.orange, title="Fast EMA") plot(slowEMA, color=color.blue, title="Slow EMA") plotshape(longSignal, title="Buy Signal", style=shape.triangleup, color=color.new(color.green, 0), location=location.belowbar, size=size.tiny) plotshape(shortSignal, title="Sell Signal", style=shape.triangledown, color=color.new(color.red, 0), location=location.abovebar, size=size.tiny) // Optional visualization of SL/TP plot(longSignal ? longSL : na, "Long Stop-Loss", color=color.new(color.red, 50), style=plot.style_linebr) plot(longSignal ? longTP : na, "Long Take-Profit", color=color.new(color.green, 50), style=plot.style_linebr) plot(shortSignal ? shortSL : na, "Short Stop-Loss", color=color.new(color.red, 50), style=plot.style_linebr) plot(shortSignal ? shortTP : na, "Short Take-Profit", color=color.new(color.green, 50), style=plot.style_linebr) // === Alerts with SL/TP info === alertcondition(longSignal, title="BUY Signal", message="BUY Alert — NQ LONG: Entry @ {{close}} | SL: {{plot_1}} | TP: {{plot_2}} | {{ticker}}") alertcondition(shortSignal, title="SELL Signal", message="SELL Alert — NQ SHORT: Entry @ {{close}} | SL: {{plot_3}} | TP: {{plot_4}} | {{ticker}}") // === Visual labels === if (longSignal) label.new(bar_index, low, "BUY SL: " + str.tostring(longSL, format.mintick) + " TP: " + str.tostring(longTP, format.mintick), style=label.style_label_up, color=color.new(#be14c4, 0), textcolor=color.white) if (shortSignal) label.new(bar_index, high, "SELL SL: " + str.tostring(shortSL, format.mintick) + " TP: " + str.tostring(shortTP, format.mintick), style=label.style_label_down, color=color.new(color.red, 0), textcolor=color.white)
Penunjuk Pine Script®
oleh ProfitsJibee
Patrice - GC M1 Bot (MACD EMA RSI)//@version=6 indicator("Patrice - GC M1 Bot (MACD EMA RSI)", overlay = true) //---------------------- // Inputs (optimisés GC) //---------------------- emaLenFast = input.int(9, "EMA rapide") emaLenSlow = input.int(14, "EMA lente") rsiLen = input.int(14, "RSI length") atrLen = input.int(14, "ATR length") volLen = input.int(20, "Volume moyenne") slMult = input.float(0.4, "SL = ATR x", step = 0.1) tpMult = input.float(0.7, "TP = ATR x", step = 0.1) minAtr = input.float(0.7, "ATR minimum pour trader", step = 0.1) maxDistEmaPct = input.float(0.3, "Distance max EMA9 (%)", step = 0.1) //---------------------- // Indicateurs //---------------------- ema9 = ta.ema(close, emaLenFast) ema14 = ta.ema(close, emaLenSlow) = ta.macd(close, 12, 26, 9) hist = macdLine - signalLine rsi = ta.rsi(close, rsiLen) atr = ta.atr(atrLen) volMa = ta.sma(volume, volLen) //---------------------- // Session 9:30 - 11:00 (NY) //---------------------- hourSession = hour(time, "America/New_York") minuteSession = minute(time, "America/New_York") inSession = (hourSession == 9 and minuteSession >= 30) or (hourSession > 9 and hourSession < 11) or (hourSession == 11 and minuteSession == 0) //---------------------- // Filtres vol / ATR / distance EMA //---------------------- volFilter = volume > volMa atrFilter = atr > minAtr distEmaPct = math.abs(close - ema9) / close * 100.0 distFilter = distEmaPct < maxDistEmaPct //---------------------- // Tendance //---------------------- bullTrend = close > ema9 and close > ema14 and ema9 > ema14 bearTrend = close < ema9 and close < ema14 and ema9 < ema14 //---------------------- // MACD : 2e barre //---------------------- bullSecondBar = hist > 0 and hist > 0 and hist <= 0 bearSecondBar = hist < 0 and hist < 0 and hist >= 0 //---------------------- // Filtres RSI //---------------------- rsiLongOk = rsi < 70 and rsi >= 45 and rsi <= 65 rsiShortOk = rsi > 30 and rsi >= 35 and rsi <= 55 //---------------------- // Gestion du risque (simple pour l'instant) //---------------------- canTradeRisk = true //---------------------- // Conditions d'entrée //---------------------- longCond = bullTrend and bullSecondBar and rsiLongOk and inSession and volFilter and atrFilter and distFilter and canTradeRisk shortCond = bearTrend and bearSecondBar and rsiShortOk and inSession and volFilter and atrFilter and distFilter and canTradeRisk //---------------------- // SL / TP (info seulement, pas d'ordres) //---------------------- slPoints = atr * slMult tpPoints = atr * tpMult longSL = close - slPoints longTP = close + tpPoints shortSL = close + slPoints shortTP = close - tpPoints //---------------------- // Visuels //---------------------- plot(ema9, title = "EMA 9") plot(ema14, title = "EMA 14") plotshape(longCond, title = "Signal Long", style = shape.triangleup, location = location.belowbar, size = size.tiny, text = "L") plotshape(shortCond, title = "Signal Short", style = shape.triangledown, location = location.abovebar, size = size.tiny, text = "S") //---------------------- // Conditions d'ALERTE //---------------------- alertcondition(longCond, title = "ALERTE LONG", message = "Signal LONG Patrice GC bot") alertcondition(shortCond, title = "ALERTE SHORT", message = "Signal SHORT Patrice GC bot")
Penunjuk Pine Script®
oleh patlarouche6
Income Engine - Daily Supertrend Covered Call SignalsWhat This Indicator Does 1. Identifies the safest time to sell a 1-week covered call The script uses the Daily Supertrend as a primary trend filter. When the trend turns bearish or weak, the indicator highlights a Sell Zone, signaling a statistically safer window to sell a covered call. Covered calls perform best when price is: Sideways Weak Trending down Not likely to surge upward The Sell Zone captures exactly this behavior. Green line=Let the stock run. Red line=safe to sell calls without assignment. Gererate income while stock falters.
Penunjuk Pine Script®
oleh srhightower4534
1
Multi-Asset: Complete AnalysisDescription: Comprehensive performance analysis tool for comparing multiple assets or custom weighted portfolios against benchmarks. Calculates Sharpe ratios across multiple timeframes (30d, 90d, 180d, 252d), total returns, CAGR, and normalized values starting from $100. Key Features: Build custom weighted portfolios (default: 50/30/20 allocation) Compare against SPY, QQQ, and other benchmarks Dynamic risk-free rate from ^IRX or manual input Multi-period Sharpe ratio analysis to validate strategy consistency Total return and annualized return (CAGR) metrics All assets normalized to common start date for accurate comparison Toggle individual assets on/off for cleaner chart viewing Use Case: Perfect for evaluating whether your custom portfolio allocation justifies its complexity versus simply buying SPY/QQQ. If your risk-adjusted returns (Sharpe) and absolute returns aren't beating the benchmarks, you're overcomplicating your strategy. Ideal for: Portfolio managers, factor investors, and anyone building custom allocations who need proof their strategy actually works.
Penunjuk Pine Script®
oleh ishatanoff
Complete Harmonic PatternOverview: The ultimate harmonic XABCD pattern identification, prediction, and backtesting system. Harmonic patterns are among the most accurate of trading signals, yet they're widely underutilized because they can be difficult to spot and tedious to validate. If you've ever come across a pattern and struggled with questions like "are these retracement ratios close enough to the harmonic ratios?" or "what are the Potential Reversal levels and are they confluent with point D?", then this tool is your new best friend. Or, if you've never traded harmonic patterns before, maybe it's time to start. Put away your drawing tools and calculators, relax, and let this indicator do the heavy lifting for you. - Identification - An exhaustive search across multiple pivot lengths ensures that even the sneakiest harmonic patterns are identified. Each pattern is evaluated and assigned a score, making it easy to differentiate weak patterns from strong ones. Tooltips under the pattern labels show a detailed breakdown of the pattern's score and retracement ratios (see the Scoring section below for details). - Prediction - After a pattern is identified, paths to potential targets are drawn, and Potential Reversal Zone (PRZ) levels are plotted based on the retracement ratios of the harmonic pattern. Targets are customizable by pattern type (e.g. you can specify one set of targets for a Gartley and another for a Bat, etc). - Backtesting - A table shows the results of all the patterns found in the chart. Change your target, stop-loss, and % error inputs and observe how it affects your success rate. //------------------------------------------------------ // Scoring //------------------------------------------------------ A percentage-based score is calculated from four components: (1) Retracement % Accuracy - this measures how closely the pattern's retracement ratios match the theoretical values (fibs) defined for a given harmonic pattern. You can change the "Allowed fib ratio error %" in Settings to be more or less inclusive. (2) PRZ Level Confluence - Potential Reversal Zone levels are projected from retracements of the XA and BC legs. The PRZ Level Confluence component measures the closeness of the closest XA and BC retracement levels, relative to the total height of the PRZ. (3) Point D / PRZ Confluence - this measures the closeness of point D to either of the closest two PRZ levels (identified in the PRZ Level Confluence component above), relative to the total height of the PRZ. In theory, the closer together these levels are, the higher the probability of a reversal. (4) Leg Length Symmetry - this measures the ΔX symmetry of each leg. You can change the "Allowed leg length asymmetry %" in settings to be more or less inclusive. So, a score of 100% would mean that (1) all leg retracements match the theoretical fib ratios exactly (to 16 decimal places), (2) the closest XA and BC PRZ levels are exactly the same, (3) point D is exactly at the confluent PRZ level, and (4) all legs are exactly the same number of bars. While this is theoretically possible, you have better odds of getting struck by lightning twice on a sunny day. Calculation weights of all four components can be changed in Settings. //------------------------------------------------------ // Targets //------------------------------------------------------ A hard-coded set of targets are available to choose from, and can be applied to each pattern type individually: (1) .618 XA = .618 retracement of leg XA, measured from point D (2) 1.272 XA = 1.272 retracement of leg XA, measured from point D (3) 1.618 XA = 1.618 retracement of leg XA, measured from point D (4) .618 CD = .618 retracement of leg CD, measured from point D (5) 1.272 CD = 1.272 retracement of leg CD, measured from point D (6) 1.618 CD = 1.618 retracement of leg CD, measured from point D (7) A = point A (8) B = point B (9) C = point C
Penunjuk Pine Script®
oleh Vmaster369
1
Micro/Mini P&L [LDT]Overview Micro/Mini P&L is a risk and P&L visualization tool built primarily for futures traders. It provides accurate dollar-based calculations for either micros or minis, regardless of which contract type you are currently charting. The indicator automatically detects your instrument (NQ, MNQ, ES, MES, YM, RTY, CL, GC, etc.) and adjusts point-value data accordingly, allowing you to chart one contract while evaluating risk for another. This removes the need for manual conversions and keeps your position data consistent at all times. Although optimized for futures, the tool also works on any other asset for general trade-level visualization. Features • Automatic instrument detection for major futures markets including NQ/MNQ, ES/MES, YM/MYM, RTY/M2K, CL/MCL, GC/MGC and others. Point-value logic adjusts instantly based on the detected symbol ensuring accurate calculations without manual configuration. • Micro/Mini display toggle, allowing you to calculate dollar values for either contract type regardless of which contract is on your chart. Useful for traders who prefer charting minis whilst trading micros or the opposite. • Trade-level visualization, including Entry, Take Profit and Stop Loss levels with automatically drawn lines and optional TP/SL zone shading for clear and structured display on the chart. • Dynamic P/L calculations, showing both point-based and dollar-based metrics in real time. This includes TP/SL dollar values, points to target/stop, real-time P/L and an optional risk-reward ratio. • Adaptive risk table, displaying contract counts from 1 up to your selected maximum, total dollar risk for each row and highlighting your chosen contract size. This provides a straightforward method for evaluating risk, scaling and position sizing. • Customizable display options, including color settings, label visibility, extension length, bar offsets and table positioning. This allows the tool to remain clean, unobtrusive and easy to integrate into any chart layout. Purpose This tool is designed to give futures traders a clear, consistent and reliable way to view dollar-accurate risk per contract without performing manual conversions. Whether you trade micros or minis, the displayed values always align with your selected contract type, even when charting the opposite market.
Penunjuk Pine Script®
oleh LeoDoesTrading
Multi-Timeframe Supertrend + MACD + MTF Dashboard if you like it click source code and save it in notepad for back up . The Multi-Timeframe Supertrend Dashboard is a powerful tool designed to give traders a clear view of market trends across multiple timeframes, all from a single dashboard. This indicator leverages the Supertrend method to calculate buy and sell signals based on the direction of price relative to dynamically calculated support and resistance lines. The dashboard is optimized for dark mode and provides easy-to-interpret color-coded signals for each timeframe. How It Works The Supertrend indicator is a trend-following indicator that uses the Average True Range (ATR) to set upper and lower bands around the price, adapting dynamically as volatility changes. When the price is above the Supertrend line, the market is considered in an uptrend, triggering a "BUY" signal. Conversely, when the price falls below the Supertrend line, the market is in a downtrend, triggering a "SELL" signal. This Multi-Timeframe Supertrend Dashboard calculates Supertrend signals for the following timeframes: 1 minute 5 minutes 15 minutes 1 hour Daily Weekly Monthly For each timeframe, the dashboard shows either a "BUY" or "SELL" signal, allowing traders to assess whether trends align across timeframes. A "BUY" signal displays in green, and a "SELL" signal displays in red, giving a quick visual reference of the overall trend direction for each timeframe. Customization Options ATR Period: Defines the period for the Average True Range (ATR) calculation, which determines how responsive the Supertrend lines are to changes in market volatility. Multiplier: Sets the sensitivity of the Supertrend bands to price movements. Higher values make the bands less sensitive, while lower values increase sensitivity, allowing quicker reactions to changes in price. How to Interpret the Dashboard The Multi-Timeframe Supertrend Dashboard allows traders to see at a glance if trends across multiple timeframes are aligned. Here’s how to interpret the signals: BUY (Green): The current timeframe’s price is in an uptrend based on the Supertrend calculation. SELL (Red): The current timeframe’s price is in a downtrend based on the Supertrend calculation. For example: If all timeframes display "BUY," the asset is in a strong uptrend across multiple time horizons, which may indicate a bullish market. If all timeframes display "SELL," the asset is likely in a strong downtrend, signaling a bearish market. Mixed signals across timeframes suggest market consolidation or differing trends across short- and long-term periods. Use Cases Trend Confirmation: Use the dashboard to confirm trends across multiple timeframes before entering or exiting a position. Quick Market Analysis: Get a snapshot of market conditions across timeframes without having to change charts. Multi-Timeframe Alignment: Identify alignment across timeframes, which is often a strong indicator of market momentum in one direction. Dark Mode Optimization The dashboard has been optimized for dark mode, with white text and contrasting background colors to ensure easy readability on darker TradingView themes. Nov 4, 2024 Release Notes Multi-Timeframe Supertrend Dashboard with Alerts Overview The Multi-Timeframe Supertrend Dashboard with Alerts is a powerful indicator designed to give traders a comprehensive view of market trends across multiple timeframes. This dashboard uses the Supertrend method to calculate buy and sell signals based on the direction of price relative to dynamic support and resistance levels. The indicator is optimized for dark mode and provides a color-coded display of buy and sell signals for each timeframe, along with optional alerts for trend alignment. How It Works The Supertrend indicator is a trend-following indicator that uses the Average True Range (ATR) to set upper and lower bands around the price, adjusting dynamically with market volatility. When the price is above the Supertrend line, the market is considered in an uptrend, triggering a "BUY" signal. Conversely, when the price falls below the Supertrend line, the market is in a downtrend, triggering a "SELL" signal. The Multi-Timeframe Supertrend Dashboard displays Supertrend signals for the following timeframes: 1 minute 5 minutes 15 minutes 1 hour Daily Weekly Monthly For each timeframe, the dashboard shows either a "BUY" or "SELL" signal, allowing traders to assess trend alignment across multiple timeframes with a single glance. A "BUY" signal displays in green, and a "SELL" signal displays in red. Alerts for Trend Alignment This indicator includes built-in alert conditions that allow traders to receive notifications when all timeframes simultaneously align in a "BUY" or "SELL" signal. This is particularly useful for identifying moments of strong trend alignment across short-term and long-term timeframes. The alerts can be set to notify the trader when: All timeframes display a "BUY" signal, indicating a strong bullish alignment across all time horizons. All timeframes display a "SELL" signal, signaling a strong bearish alignment. Customization Options ATR Period: Defines the period for the Average True Range (ATR) calculation, which determines how responsive the Supertrend lines are to changes in market volatility. Multiplier: Sets the sensitivity of the Supertrend bands to price movements. Higher values make the bands less sensitive, while lower values increase sensitivity, allowing quicker reactions to changes in price. How to Interpret the Dashboard BUY (Green): The price is above the Supertrend line, indicating an uptrend for that timeframe. SELL (Red): The price is below the Supertrend line, indicating a downtrend for that timeframe. Examples: If all timeframes display "BUY," the asset is in a strong uptrend across multiple time horizons, signaling potential buying opportunities. If all timeframes display "SELL," the asset is likely in a strong downtrend, signaling potential selling opportunities. Mixed signals suggest a consolidation phase or differing trends across short- and long-term periods. Use Cases Trend Confirmation: Use the dashboard to confirm trends across multiple timeframes before entering or exiting a position. Alert Notifications: Set alerts to receive notifications when all timeframes align in a "BUY" or "SELL" signal. Quick Market Analysis: Get an instant overview of market conditions without switching between charts. Multi-Timeframe Alignment: Identify alignment across timeframes, often a strong indicator of market momentum in one direction. Dark Mode Optimization The dashboard has been optimized for dark mode, with white text and contrasting background colors to ensure easy readability on darker TradingView themes. Nov 6, 2024 Release Notes Multi-Timeframe Supertrend Dashboard with Custom Alerts Description: This Multi-Timeframe Supertrend Dashboard indicator provides a powerful tool for traders who want to monitor multiple timeframes simultaneously and receive alerts when all timeframes align on a single trend (either BUY or SELL). The indicator uses the popular Supertrend calculation, with customizable ATR (Average True Range) period and multiplier values to tailor sensitivity to your trading style. Key Features: Customizable Timeframes: Track and display up to six timeframes, fully configurable to meet any trading strategy. The default timeframes include 1 Minute, 5 Minutes, 15 Minutes, 1 Hour, 1 Day, and 1 Week but can be changed to any intervals supported by TradingView. Selective Display Options: With a user-friendly display selection, you can choose which timeframes to show on the dashboard. For example, you may choose to view only Timeframe 1 through Timeframe 5 or any combination of the six. Real-Time Alignment Alerts: Alerts can be set to trigger when all selected timeframes align on a BUY or SELL signal. This feature enables traders to catch strong trends across timeframes without constant monitoring. Alerts are fully configurable, allowing for sound notifications, email alerts, or even webhook notifications to automated trading systems. Custom Supertrend Settings: Adjust the ATR Period and Multiplier values to control the Supertrend's sensitivity. Lower values result in more frequent trend changes, while higher values smooth out the trend and focus on larger market moves. Intuitive Color-Coded Dashboard: The dashboard is visually optimized for quick insights: Green cells indicate a BUY trend. Red cells indicate a SELL trend. Background color changes when all selected timeframes align, giving an instant visual cue for strong trends. How to Use: Select Timeframes: Go to the input settings to choose the timeframes you want to monitor. Each timeframe is labeled (e.g., Timeframe 1, Timeframe 2) for easy reference. Configure Display Preferences: Enable or disable specific timeframes to customize your dashboard view. This is useful for focusing only on timeframes relevant to your strategy. Set ATR and Multiplier Values: Adjust these settings to define the Supertrend calculation's responsiveness. This customization allows adaptation to various markets, including stocks, forex, and cryptocurrencies. Enable Alerts: Turn on alerts to receive notifications when all active timeframes align. Customize the alert type and delivery (sound, popup, email, etc.) to ensure you’re notified on time. Ideal For: Trend Traders who want confirmation of trends across multiple timeframes. Scalpers and Day Traders looking for quick trend changes with smaller timeframes. Swing Traders who want a broader overview of market alignment across hourly and daily frames. Automated System Developers looking for reliable signals across multiple timeframes to integrate with other strategies.
Penunjuk Pine Script®
oleh Vmaster369
[CT] Kurutoga MTF HistogramWhat is Kurutoga MTF Histogram? The Kurutoga MTF Histogram is a multi-time-frame momentum and mean-deviation tool. It measures how far the current close is trading away from a rolling midpoint of price and then displays that deviation as a color-coded histogram. Instead of looking only at one lookback, this version plots three Kurutoga “leads” at the same time: Kurutoga Lead (x1) – base length Kurutoga Lead 2x – slower, 2 × base length Kurutoga Lead 4x – slowest, 4 × base length Each lead is calculated both on the chart’s timeframe (LTF) and on a Higher Time Frame (HTF) of your choice, so you can see short-term deviation inside a higher-time-frame structure. 4-color Kurutoga scheme Each Kurutoga lead uses a 4-color MACD-style scheme: For a given lead: Up Light – divergence ≥ 0 and rising compared to the previous bar Up Dark – divergence ≥ 0 and falling (positive but losing momentum) Down Light – divergence < 0 and falling (bearish momentum increasing) Down Dark – divergence < 0 and rising (negative but contracting) By default the same four teal / red hues are shared across x1, x2, and x4. The only difference between the leads is transparency: x1 = strongest (least transparent) x2 = medium opacity x4 = faintest This lets you see all three layers at once without the chart becoming a solid block of color. The HTF areas use the same palette but with an extra transparency offset applied, so they appear as soft background bands rather than competing with the histograms. Inputs and how to use them 1. Base Length Defines the lookback for the main Kurutoga Lead. The script automatically creates: len1 = baseLength len2 = baseLength × 2 len3 = baseLength × 4 Smaller base lengths → faster, more reactive histograms. Larger base lengths → smoother, trend-focused behavior. 2. Higher Time Frame This is the HTF used for the area plots and HTF midpoints. Examples: 5-minute chart with HTF = 30 or 60 minutes 15-minute chart with HTF = 4H or 1D The idea is to trade on the lower timeframe while seeing how far price is stretched relative to a higher-time-frame range midpoint. 3. Show / Hide toggles Under “Show / Hide” you can independently turn on/off: Kurutoga Lead (x1) Kurutoga Lead 2x Kurutoga Lead 4x HTF Lead, HTF Lead 2x, HTF Lead 4x This lets you: Run only a single Kurutoga if you want a clean panel, or Stack multiple leads for a “multi-speed” view of extension and mean reversion. 4. Color Scheme (4-color Kurutoga) Up Light / Up Dark / Down Light / Down Dark – base hues used for every lead. Lead opacity (x1, 2x, 4x) – sets how strong or faint each lead appears. x1 is usually your primary “trading speed.” x2 and x4 can be faded so they act as context. Extra transparency for HTF areas – additional opacity applied on top of each lead’s opacity when drawing HTF areas. This keeps the HTF layer subtle. You can fine-tune the exact teal/red values here to match your personal palette. Practical reading & trade ideas Trend alignment When all three Kurutoga leads (x1, 2x, 4x) are above zero, price is trading above its rolling mid-range on multiple speeds → bullish environment. When all three are below zero, you have a multi-speed bearish environment. Mixed readings (e.g., x1 above zero, x4 below zero) can signal transition or mean-reversion areas. Momentum vs exhaustion Up Light / Down Light (light colors) show momentum expanding in that direction. Up Dark / Down Dark (dark colors) show momentum contracting – price still on that side of zero, but the push is weakening. After a run of Up Light bars, a shift to Up Dark may hint at a stall or pullback. After a run of Down Light bars, a shift to Down Dark may hint at short covering / bounce potential. Multi-time-frame confluence Use the HTF areas as a backdrop: If LTF Kurutoga leads are above zero while the HTF area is also positive (and ideally expanding), that’s strong bullish alignment. If LTF leads are trying to flip up while HTF divergence is still deeply negative, you may be looking at a counter-trend bounce rather than a true trend change. Example setups Trend-following entries: Look for x2 & x4 leads on the same side of zero as the HTF area, then use x1 color shifts (from Down Dark → Up Light or vice versa) to fine-tune entries in the direction of that higher-time-frame bias. Mean-reversion fades: Watch for extreme Kurutoga values where x1/x2 are strongly extended beyond zero while color flips from Light to Dark (momentum stalling) against an opposing HTF backdrop . Notes The indicator is non-directional by itself – it measures distance from a rolling midpoint rather than trend structure or order flow. It works best when combined with your existing price action/trend tools (moving averages, HLBO, structure zones, etc.). Because HTF values are brought down via request.security, choose HTF settings that make sense for your product and session (for example, don’t use very high HTFs on thin intraday markets). Use the Kurutoga MTF Histogram as a visual scanner for extension, momentum regime, and multi-speed alignment, then layer your own entry/exit rules on top.
Penunjuk Pine Script®
oleh ChaosTrader63
Stablecoin Total Index V4**Stablecoin Total Index V4 - Full History + Full Coverage** This indicator provides the **best of both worlds**: long historical data AND complete stablecoin coverage. **How it works:** - **Before May 2025:** Manual sum of 35 major stablecoins (~90% coverage) - **After May 2025:** Switches to STABLE.C index (100 stablecoins, 100% coverage) **Why this approach?** TradingView's official STABLE.C index was only created on May 19, 2025. This indicator gives you **years of historical data** going back to 2017-2018, then seamlessly transitions to the official index for complete accuracy. **Note:** There is a ~$30B jump at the May 2025 transition point. This is NOT an error - it represents the ~65 smaller stablecoins that are included in STABLE.C but don't have individual CRYPTOCAP symbols for manual tracking. **Pre-May 2025 Coverage (35 stablecoins):** - **Tier 1:** USDT, USDC - **Tier 2:** DAI, USDe, USDS, FDUSD - **Tier 3:** TUSD, USDP, GUSD, FRAX, PYUSD, LUSD, BUSD - **Tier 4 (2024-2025):** USD1, RLUSD, GHO, crvUSD, sUSDe, USDY, USDM - **Tier 5 (Euro):** EURC, EURT, EURS - **Tier 6 (DeFi):** USDD, MIM, DOLA, OUSD, alUSD, sUSD, cUSD - **Tier 7:** HUSD, USDX, USTC - **Gold-Backed:** PAXG, XAUT **Post-May 2025:** Full STABLE.C (100 stablecoins) **Features:** - Green/Red color based on direction - 20-period SMA - Reference lines at $100B, $200B, $300B **Best used on Daily timeframe or higher.**
Penunjuk Pine Script®
oleh amiramnoam
Predictive Analysis Engine — Adaptive MACD Forecasting with R² SProfessional and Rule-Compliant Description (Ready for Publishing) This description explains every component of the script in detail, highlights its originality, and provides traders with clear usage instructions — exactly what TradingView expects. Predictive Analysis Engine (PAE) This script is a predictive analysis model that combines trend filtering, linear forecasting, stability analysis (R²), and outlier filtering using ATR to produce an advanced, leading-style version of MACD rather than a traditional lagging one. The indicator does not rely on random elements; it is built on four core components that work together: 1. Stability Measurement Using R² The coefficient of determination (R²) is calculated based on the correlation between price and time, then normalized to a 0–1 scale. A higher R² indicates more stable price movement, allowing the script to increase forecast accuracy. Here, R² acts as a primary component of the Confidence Filter. 2. Forecasted Price Using Linear Regression Instead of relying solely on the current price, the script uses: Linear Regression Weighted blending between the forecasted price and actual price This enables the script to build a Leading MACD based on an “advanced” price that anticipates probable movement. 3. Advanced MACD With Adaptive Smoothing MACD is applied to the blended (real + forecasted) price using: Fast EMA Slow EMA MACD base Optional TEMA for reducing signal lag Adjustable histogram smoothing This process makes MACD more responsive with significantly less lag, reacting faster to predicted movements. 4. Predictive MACD (Projected MACD) Linear Regression is applied again — but this time to: MACD Signal Histogram to generate projected versions of each line (proj_macd, proj_signal), while proj_hist is used to produce early signals before the actual crossover occurs. 5. Volatility Filtering Using ATR & Volatility Ratio ATR is used to evaluate: Strength of movement Overextension levels Signal quality ATR is combined with R² to compute: Confidence = R² × Volatility Ratio This suppresses weak signals and boosts high-quality, reliable ones. 6. Predictive Signals + Safety Filters A signal is triggered when: proj_hist crosses the 0 level Confidence exceeds the required threshold The real histogram is not excessively stretched (extra safety) The script includes: BUY / SELL BUY_STRONG / SELL_STRONG based on the smoothed histogram trend. 7. Coloring, Background & Visual Enhancements The script colors: The histogram Chart background Signal lines to clearly highlight momentum direction and confidence conditions. 8. Built-In Alerts The script provides ready-to-use alerts: BUY Alert SELL Alert Both based on the predictive MACD model. How to Use the Script Add it to any timeframe and any market. BUY/SELL signals are generated from the projected histogram crossover. Higher Confidence = stronger signal. Background colors help visualize trend transitions instantly. Recommended to combine with support/resistance or price action. Indicator Objective This script is designed to deliver early insight into momentum shifts using a blend of: Linear forecasting Trend stability via R² Signal quality filtering via ATR A fast and adaptive advanced MACD
Penunjuk Pine Script®
oleh oqba
Daily AVWAPsDaily AVWAPs is designed for intraday and swing traders who track institutional volume benchmarks. Instead of a single "rolling" line that resets continuously, this indicator identifies the starting timestamp of the last 5 trading sessions and draws five distinct Anchored VWAPs from those exact moments. This allows traders to see exactly where the average volume-weighted price stands for the current day (1D), yesterday (2D), and the three days prior (3D, 4D, 5D) simultaneously. Key Features Polyline Visualization: Unlike standard indicators that plot historical values for every bar (creating a messy "sawtooth" effect), this script uses Pine Script Polylines. It draws clean, static lines starting from the specific anchor point to the present price, mimicking the manual "Anchored VWAP" drawing tool. Dynamic Session Detection: The script contains zero hardcoded dates. It automatically detects when a new trading day begins based on the chart data. It works seamlessly across all asset classes (Stocks, Crypto, Futures) and automatically adjusts for weekends, holidays, and irregular trading weeks without manual updates. Unified Color Control: Input colors are synchronized. Changing a color in the settings menu updates both the chart line and the price scale label instantly. Toggle Controls: Individual checkboxes allow you to toggle any specific VWAP (1D through 5D) on or off to keep your chart clean. How to Use Trend Strength: When the 1D, 2D, and 3D VWAPs are "fanning out" in alignment, the trend is strong. Mean Reversion: In a sideways market, price often gravitates back to the 5-Day VWAP as a "value area." Support & Resistance: Watch for price to respect the VWAP of a previous high-volume day (e.g., bouncing off the 3D VWAP during a pullback). Settings Source: Select the price data source (default is OHLC4) . Colors & Toggles: Use the checkboxes to enable/disable specific lines. Customize the color for each specific day's AVWAP directly in the Inputs tab. This indicator was adapted and repurposed from the original work by The_Last_Gentleman . Technical Note: This indicator is optimized for intraday timeframes (1m, 5m, 15m, 1H). Because it uses polyline and array logic to scan specific session timestamps, it calculates exclusively on the most recent bar to maintain high performance.
Penunjuk Pine Script®
oleh ombvexx27
Structural Liquidity ZonesTitle: Structural Liquidity Zones Description: This script is a technical analysis system designed to map market structure (Liquidity) using dynamic, volatility-adjusted zones, while offering an optional Trend Confluence filter to assist with trade timing. Concept & Originality: Standard support and resistance indicators often clutter the chart with historical lines that are no longer relevant. This script solves that issue by utilizing Pine Script Arrays and User-Defined Types to manage the "Lifecycle" of a zone. It automatically detects when a structure is broken by price action and removes it from the chart, ensuring traders only see valid, fresh levels. By combining this structural mapping with an optional EMA Trend Filter, the script serves as a complete "Confluence System," helping traders answer both "Where to trade?" (Structure) and "When to trade?" (Trend). Key Features: 1. Dynamic Structure (The Array Engine) Pivot Logic: The script identifies major turning points using a customizable lookback period. Volatility Zones: Instead of thin lines, zones are projected using the ATR (Average True Range). This creates a "breathing room" for price, visualizing potential invalidation areas. Active Management: The script maintains a memory of active zones. As new bars form, the zones extend forward. If price closes beyond a zone, the script's garbage collection logic removes the level, keeping the chart clean. 2. Trend Confluence (Optional) EMA System: Includes a Fast (9) and Slow (21) Exponential Moving Average module. Signals: Visual Buy/Sell labels appear on crossover events. Purpose: This allows for "Filter-based Trading." For example, a trader can choose to take a "Buy" bounce from a Support Zone only if the EMA Trend is also bullish. Settings: Structure Lookback: Controls the sensitivity of the pivot detection. Max Active Zones: Limits the number of lines to optimize performance. ATR Settings: Adjusts the width of the zones based on volatility. Enable Trend Filter: Toggles the EMA lines and signals on/off. Usage: This tool is intended for structural analysis and educational purposes. It visualizes the relationship between price action pivots and momentum trends.
Penunjuk Pine Script®
oleh siddarth_banakar3
3
Smart RSI MTF [DotGain]Summary Are you tired of constantly switching between timeframes to check the RSI, only to miss the bigger picture? The Smart RSI MTF (Multi-Timeframe) is designed to solve this exact problem. It is a streamlined chart overlay that monitors RSI conditions across up to 10 different timeframes simultaneously —from the 1-minute chart all the way up to the Monthly view. This indicator removes the need for multiple open tabs and declutters your analysis by plotting signals directly on your main chart using a smart "visual hierarchy" system based on transparency. ⚙️ Core Components and Logic The Smart RSI MTF relies on a sophisticated 3-layer logic to deliver clear, actionable context: Multi-Timeframe Engine: The script runs 10 independent RSI calculations in the background. It checks standard intervals (5m, 15m, 1h, 4h, Daily, Weekly, Monthly) to ensure you never miss a momentum extreme on any scale. Classic RSI Thresholds: Overbought (> 70): Indicates price may be extended to the upside. Oversold (< 30): Indicates price may be extended to the downside. Smart Visibility System (The "Secret Sauce"): Not all signals are equal. A 5-minute Overbought signal is "noise" compared to a Weekly Overbought signal. This indicator automatically applies Transparency to differentiate importance: Minutes = High Transparency (Faint). Hours = Medium Transparency. Days/Weeks/Months = No Transparency (Solid/Bold). 🚦 How to Read the Indicator The indicator plots shapes (Labels by default) directly above or below the candles. The appearance tells you the direction and the timeframe significance: 🟥 RED SIGNALS (Overbought Condition) Trigger: RSI is above 70 on a specific timeframe. Location: Placed above the candle bar. Meaning: Potential bearish reversal or pullback. 🟩 GREEN SIGNALS (Oversold Condition) Trigger: RSI is below 30 on a specific timeframe. Location: Placed below the candle bar. Meaning: Potential bullish reversal or bounce. 👻 TRANSPARENCY (Signal Strength) Faint/Ghostly: The signal comes from a lower timeframe (e.g., 5m, 15m). Use for scalping or entry timing. Solid/Bright: The signal comes from a major timeframe (e.g., Daily, Weekly). Use for swing trading and identifying major market turns. Visual Elements Symbol Shapes: Fully customizable (Label, Diamond, Circle, Triangle, etc.) via settings. Stacking: If multiple timeframes trigger at once, symbols will overlay, creating a visually denser and darker color, indicating Confluence . Key Benefit The goal of the Smart RSI MTF is to help traders instantly spot Confluence . When you see a faint short-term signal align with a solid long-term signal, you have identified a high-probability reversal zone without leaving your chart. Have fun :) Disclaimer This "Smart RSI MTF" indicator is provided for informational and educational purposes only. It does not, and should not be construed as, financial, investment, or trading advice. The signals generated by this tool (both "Buy" and "Sell" indications) are the result of a specific set of algorithmic conditions. They are not a direct recommendation to buy or sell any asset. All trading and investing in financial markets involves substantial risk of loss. You can lose all of your invested capital. Past performance is not indicative of future results. The signals generated may produce false or losing trades. The creator (© DotGain) assumes no liability for any financial losses or damages you may incur as a result of using this indicator. You are solely responsible for your own trading and investment decisions. Always conduct your own research (DYOR) and consider your personal risk tolerance before making any trades.
Penunjuk Pine Script®
oleh DotGain
Dashboard Principales sectores🔍 What This Dashboard Shows Performance of the top 20 U.S. market sectors and ETFs (e.g., Technology, Energy, Financials, Biotechnology, Semiconductors, etc.). Percentage change based on the selected chart timeframe: Daily timeframe → daily change Weekly timeframe → weekly change Monthly timeframe → monthly change Ticker symbol displayed next to each sector name. Color-coded performance for quick interpretation: 🟩 Positive 🟥 Negative 🟨 Neutral
Penunjuk Pine Script®
oleh nicologo11
Stablecoin Total Index V3**Stablecoin Total Index V4 - Full History + Full Coverage** This indicator provides the **best of both worlds**: long historical data AND complete stablecoin coverage. **How it works:** - **Before May 2025:** Manual sum of 35 major stablecoins (~90% coverage) - **After May 2025:** Switches to STABLE.C index (100 stablecoins, 100% coverage) **Why this approach?** TradingView's official STABLE.C index was only created on May 19, 2025. This indicator gives you **years of historical data** going back to 2017-2018, then seamlessly transitions to the official index for complete accuracy. **Note:** There is a ~$30B jump at the May 2025 transition point. This is NOT an error - it represents the ~65 smaller stablecoins that are included in STABLE.C but don't have individual CRYPTOCAP symbols for manual tracking. **Pre-May 2025 Coverage (35 stablecoins):** - **Tier 1:** USDT, USDC - **Tier 2:** DAI, USDe, USDS, FDUSD - **Tier 3:** TUSD, USDP, GUSD, FRAX, PYUSD, LUSD, BUSD - **Tier 4 (2024-2025):** USD1, RLUSD, GHO, crvUSD, sUSDe, USDY, USDM - **Tier 5 (Euro):** EURC, EURT, EURS - **Tier 6 (DeFi):** USDD, MIM, DOLA, OUSD, alUSD, sUSD, cUSD - **Tier 7:** HUSD, USDX, USTC - **Gold-Backed:** PAXG, XAUT **Post-May 2025:** Full STABLE.C (100 stablecoins) **Features:** - Green/Red color based on direction - 20-period SMA - Reference lines at $100B, $200B, $300B **Best used on Daily timeframe or higher.**
Penunjuk Pine Script®
oleh amiramnoam