Mulakan

Penunjuk dan strategi

Institution Accumulation/DistributionLeveraging the Williams%R oscillator, the script has been optimized to pick out key turning point in the market specifically at Resistance (Overbought) or Support (Oversold) The algo has been programmed to print both buy and sell alerts at extremes/when conditions flip eg a long position will be closed simultaneously opening a short position above resistance. Best used as a scalping tool targeting 30m and below works well with currency pairs
Strategi Pine Script®
oleh DVNNY
2
SONIC R BREAK FINAL (VER5) Purpose: Capture breakouts through Support/Resistance (S/R) zones based on Pivot and filter signals using EMA 34 (High/Low/Close), EMA 89, volume, and candle structure. Includes a Higher Timeframe (H4) RSI risk warning (visual only, does not block entries). How it works S/R zones from Pivot Draws Resistance and Support using ta.pivothigh/ta.pivotlow with Left/Right Bars. S/R lines are locked with offset to reduce repaint. EMA trend filters EMA34 High/Low/Close build a “EMA 34 band”. EMA89 works as the main trend filter. Trend conditions: Long: close above all EMA34 High/Low/Close and EMA89. Short: close below all EMA34 High/Low/Close and EMA89. Volume filter (optional) Signal valid only if Volume > SMA(Volume, n). Wick filter Each wick (upper/lower) ≤ 50% of candle range to avoid weak breakouts. Higher TF RSI risk (H4) Fetches RSI from a higher timeframe (default H4). If RSI exceeds threshold, breakout labels turn gray (risk warning only). Anti-repeat mechanism Each new pivot resets trigger. Each S/R level triggers only once until the next pivot is formed. Signals & Alerts Label “B” (green) below candle: breakout above Resistance, valid EMA/Volume/Wick conditions. Label “S” (red) above candle: breakout below Support, valid EMA/Volume/Wick conditions. Gray labels = H4 RSI risk warning. Unified alert: “S/R Breakout (Unified)” with message B=Buy, S=Sell, Gray=Risk. Parameters Show Breaks: toggle breakout detection. Left/Right Bars: pivot sensitivity. Require Volume > Average + Volume MA Length: volume filter. Use H4 RSI Risk Warning: enable higher TF RSI check. RSI Length, Higher TF (minutes), RSI thresholds for Buy/Sell risk. Usage tips Prioritize trades in the same direction as EMA89 and EMA34 trend. Works on M5 to H4; best combined with RSI H4 when trading M15/M30. Place SL behind the S/R just broken, TP by fixed RR or EMA trailing. Increase Left/Right Bars for stronger zones and less noise in sideways markets. Notes Pivot still has repaint element (mitigated by offset). This indicator is not financial advice. Always combine with proper risk management. Version Clean v4: added wick ≤50% filter, H4 RSI risk coloring, volume filter, anti-repeat pivot trigger, unified alert, EMA34 H/L/C background shading.
Penunjuk Pine Script®
oleh tanle26112002
Historical & Periodic Key LevelsHistorical & Periodic Key Levels This indicator automatically plots historical key levels (ATH/ATL) and periodic closing levels (Daily, Weekly, Monthly, Yearly). It highlights major price zones frequently used in technical and institutional trading. Key Features: Dynamic ATH/ATL: tracks all-time high/low with date annotation. Periodic Closes: previous D/W/M/Y closes with directional coloring. Adaptive Colors: green/red based on bullish or bearish close. Full Customization: toggle visibility, colors, line width, text alignment, and label text. Smart Label Management: prevents overlap by cycling through label styles automatically. Usage: Identify strong support/resistance levels. Monitor key closing prices across multiple timeframes. Enhance swing trading and long-term analysis with institutional reference levels. Inputs: Levels Visibility: show/hide ATH, ATL, and periodic closes. ATH/ATL Style Settings: line colors, label prefix, width, and text alignment. Periodic Levels Style: label text (D/W/M/Y), line width, alignment, and bullish/bearish colors. Notes: Levels adjust automatically to the active chart timeframe. Lower timeframe levels are hidden when redundant (e.g., daily close on daily chart).
Penunjuk Pine Script®
oleh YouNesta
Rolling Volatility BandsMake sure to view it from the 1D candlestick chart. The Rolling Volatility Bands indicator provides a statistically-driven approach to visualizing expected daily price movements using true volatility calculations employed by professional options traders. Unlike traditional Bollinger Bands which use price standard deviation around a moving average, this indicator calculates actual daily volatility from log returns over customizable rolling periods (20-day and 60-day), then annualizes the volatility using the standard √252 formula before projecting forward-looking probability bands. The 1 Standard Deviation bands represent a ~68% probability zone where price is expected to trade the following day, while the 2 Standard Deviation bands capture ~95% of expected movements. This methodology mirrors how major exchanges calculate expected moves for earnings and FOMC events, making it invaluable for options strategies like iron condors during low-volatility periods (narrow bands) or directional plays when volatility expands. The indicator works on any timeframe while always utilizing daily candle data via security() calls, ensuring consistent volatility calculations regardless of your chart resolution, and includes real-time annualized volatility percentages plus daily expected range statistics for comprehensive market analysis.
Penunjuk Pine Script®
oleh Refic
Previous Day Fibonacci + Opening RangePrev Day Fibonacci & Opening Range Levels This indicator is designed for professional traders who want to combine yesterday’s market structure with today’s intraday levels. 🔹 Features: Automatic Fibonacci Retracements: Draws customizable Fibonacci retracement/extension levels based on the previous day’s High & Low. Full Customization: Users can adjust the Fibonacci ratios and colors directly in settings. Opening Range Levels: Plots today’s first candle High & Low (user-selectable timeframe for OR). Clear Visuals: Helps identify key reversal zones, breakout levels, and confluence areas between higher timeframe structure and intraday moves. 🔹 Usage Ideas: Spot potential reversal zones when price reacts to previous-day Fib levels. Combine Opening Range breakout strategies with daily Fib levels for high-probability setups. Use as confluence levels with your existing price action or indicator-based strategy. ⚡ Pro Tip: Look for overlaps between the Opening Range and Fibonacci retracements — these zones often act as strong support/resistance areas.
Penunjuk Pine Script®
oleh drashtayoga11
Markov Chain [3D] | FractalystWhat exactly is a Markov Chain? This indicator uses a Markov Chain model to analyze, quantify, and visualize the transitions between market regimes (Bull, Bear, Neutral) on your chart. It dynamically detects these regimes in real-time, calculates transition probabilities, and displays them as animated 3D spheres and arrows, giving traders intuitive insight into current and future market conditions. How does a Markov Chain work, and how should I read this spheres-and-arrows diagram? Think of three weather modes: Sunny, Rainy, Cloudy. Each sphere is one mode. The loop on a sphere means “stay the same next step” (e.g., Sunny again tomorrow). The arrows leaving a sphere show where things usually go next if they change (e.g., Sunny moving to Cloudy). Some paths matter more than others. A more prominent loop means the current mode tends to persist. A more prominent outgoing arrow means a change to that destination is the usual next step. Direction isn’t symmetric: moving Sunny→Cloudy can behave differently than Cloudy→Sunny. Now relabel the spheres to markets: Bull, Bear, Neutral. Spheres: market regimes (uptrend, downtrend, range). Self‑loop: tendency for the current regime to continue on the next bar. Arrows: the most common next regime if a switch happens. How to read: Start at the sphere that matches current bar state. If the loop stands out, expect continuation. If one outgoing path stands out, that switch is the typical next step. Opposite directions can differ (Bear→Neutral doesn’t have to match Neutral→Bear). What states and transitions are shown? The three market states visualized are: Bullish (Bull): Upward or strong-market regime. Bearish (Bear): Downward or weak-market regime. Neutral: Sideways or range-bound regime. Bidirectional animated arrows and probability labels show how likely the market is to move from one regime to another (e.g., Bull → Bear or Neutral → Bull). How does the regime detection system work? You can use either built-in price returns (based on adaptive Z-score normalization) or supply three custom indicators (such as volume, oscillators, etc.). Values are statistically normalized (Z-scored) over a configurable lookback period. The normalized outputs are classified into Bull, Bear, or Neutral zones. If using three indicators, their regime signals are averaged and smoothed for robustness. How are transition probabilities calculated? On every confirmed bar, the algorithm tracks the sequence of detected market states, then builds a rolling window of transitions. The code maintains a transition count matrix for all regime pairs (e.g., Bull → Bear). Transition probabilities are extracted for each possible state change using Laplace smoothing for numerical stability, and frequently updated in real-time. What is unique about the visualization? 3D animated spheres represent each regime and change visually when active. Animated, bidirectional arrows reveal transition probabilities and allow you to see both dominant and less likely regime flows. Particles (moving dots) animate along the arrows, enhancing the perception of regime flow direction and speed. All elements dynamically update with each new price bar, providing a live market map in an intuitive, engaging format. Can I use custom indicators for regime classification? Yes! Enable the "Custom Indicators" switch and select any three chart series as inputs. These will be normalized and combined (each with equal weight), broadening the regime classification beyond just price-based movement. What does the “Lookback Period” control? Lookback Period (default: 100) sets how much historical data builds the probability matrix. Shorter periods adapt faster to regime changes but may be noisier. Longer periods are more stable but slower to adapt. How is this different from a Hidden Markov Model (HMM)? It sets the window for both regime detection and probability calculations. Lower values make the system more reactive, but potentially noisier. Higher values smooth estimates and make the system more robust. How is this Markov Chain different from a Hidden Markov Model (HMM)? Markov Chain (as here): All market regimes (Bull, Bear, Neutral) are directly observable on the chart. The transition matrix is built from actual detected regimes, keeping the model simple and interpretable. Hidden Markov Model: The actual regimes are unobservable ("hidden") and must be inferred from market output or indicator "emissions" using statistical learning algorithms. HMMs are more complex, can capture more subtle structure, but are harder to visualize and require additional machine learning steps for training. A standard Markov Chain models transitions between observable states using a simple transition matrix, while a Hidden Markov Model assumes the true states are hidden (latent) and must be inferred from observable “emissions” like price or volume data. In practical terms, a Markov Chain is transparent and easier to implement and interpret; an HMM is more expressive but requires statistical inference to estimate hidden states from data. Markov Chain: states are observable; you directly count or estimate transition probabilities between visible states. This makes it simpler, faster, and easier to validate and tune. HMM: states are hidden; you only observe emissions generated by those latent states. Learning involves machine learning/statistical algorithms (commonly Baum–Welch/EM for training and Viterbi for decoding) to infer both the transition dynamics and the most likely hidden state sequence from data. How does the indicator avoid “repainting” or look-ahead bias? All regime changes and matrix updates happen only on confirmed (closed) bars, so no future data is leaked, ensuring reliable real-time operation. Are there practical tuning tips? Tune the Lookback Period for your asset/timeframe: shorter for fast markets, longer for stability. Use custom indicators if your asset has unique regime drivers. Watch for rapid changes in transition probabilities as early warning of a possible regime shift. Who is this indicator for? Quants and quantitative researchers exploring probabilistic market modeling, especially those interested in regime-switching dynamics and Markov models. Programmers and system developers who need a probabilistic regime filter for systematic and algorithmic backtesting: The Markov Chain indicator is ideally suited for programmatic integration via its bias output (1 = Bull, 0 = Neutral, -1 = Bear). Although the visualization is engaging, the core output is designed for automated, rules-based workflows—not for discretionary/manual trading decisions. Developers can connect the indicator’s output directly to their Pine Script logic (using input.source()), allowing rapid and robust backtesting of regime-based strategies. It acts as a plug-and-play regime filter: simply plug the bias output into your entry/exit logic, and you have a scientifically robust, probabilistically-derived signal for filtering, timing, position sizing, or risk regimes. The MC's output is intentionally "trinary" (1/0/-1), focusing on clear regime states for unambiguous decision-making in code. If you require nuanced, multi-probability or soft-label state vectors, consider expanding the indicator or stacking it with a probability-weighted logic layer in your scripting. Because it avoids subjectivity, this approach is optimal for systematic quants, algo developers building backtested, repeatable strategies based on probabilistic regime analysis. What's the mathematical foundation behind this? The mathematical foundation behind this Markov Chain indicator—and probabilistic regime detection in finance—draws from two principal models: the (standard) Markov Chain and the Hidden Markov Model (HMM). How to use this indicator programmatically? The Markov Chain indicator automatically exports a bias value (+1 for Bullish, -1 for Bearish, 0 for Neutral) as a plot visible in the Data Window. This allows you to integrate its regime signal into your own scripts and strategies for backtesting, automation, or live trading. Step-by-Step Integration with Pine Script (input.source) Add the Markov Chain indicator to your chart. This must be done first, since your custom script will "pull" the bias signal from the indicator's plot. In your strategy, create an input using input.source() Example: //@version=5 strategy("MC Bias Strategy Example") mcBias = input.source(close, "MC Bias Source") After saving, go to your script’s settings. For the “MC Bias Source” input, select the plot/output of the Markov Chain indicator (typically its bias plot). Use the bias in your trading logic Example (long only on Bull, flat otherwise): if mcBias == 1 strategy.entry("Long", strategy.long) else strategy.close("Long") For more advanced workflows, combine mcBias with additional filters or trailing stops. How does this work behind-the-scenes? TradingView’s input.source() lets you use any plot from another indicator as a real-time, “live” data feed in your own script (source). The selected bias signal is available to your Pine code as a variable, enabling logical decisions based on regime (trend-following, mean-reversion, etc.). This enables powerful strategy modularity : decouple regime detection from entry/exit logic, allowing fast experimentation without rewriting core signal code. Integrating 45+ Indicators with Your Markov Chain — How & Why The Enhanced Custom Indicators Export script exports a massive suite of over 45 technical indicators—ranging from classic momentum (RSI, MACD, Stochastic, etc.) to trend, volume, volatility, and oscillator tools—all pre-calculated, centered/scaled, and available as plots. // Enhanced Custom Indicators Export - 45 Technical Indicators // Comprehensive technical analysis suite for advanced market regime detection //@version=6 indicator('Enhanced Custom Indicators Export | Fractalyst', shorttitle='Enhanced CI Export', overlay=false, scale=scale.right, max_labels_count=500, max_lines_count=500) // |----- Input Parameters -----| // momentum_group = "Momentum Indicators" trend_group = "Trend Indicators" volume_group = "Volume Indicators" volatility_group = "Volatility Indicators" oscillator_group = "Oscillator Indicators" display_group = "Display Settings" // Common lengths length_14 = input.int(14, "Standard Length (14)", minval=1, maxval=100, group=momentum_group) length_20 = input.int(20, "Medium Length (20)", minval=1, maxval=200, group=trend_group) length_50 = input.int(50, "Long Length (50)", minval=1, maxval=200, group=trend_group) // Display options show_table = input.bool(true, "Show Values Table", group=display_group) table_size = input.string("Small", "Table Size", options= , group=display_group) // |----- MOMENTUM INDICATORS (15 indicators) -----| // // 1. RSI (Relative Strength Index) rsi_14 = ta.rsi(close, length_14) rsi_centered = rsi_14 - 50 // 2. Stochastic Oscillator stoch_k = ta.stoch(close, high, low, length_14) stoch_d = ta.sma(stoch_k, 3) stoch_centered = stoch_k - 50 // 3. Williams %R williams_r = ta.stoch(close, high, low, length_14) - 100 // 4. MACD (Moving Average Convergence Divergence) = ta.macd(close, 12, 26, 9) // 5. Momentum (Rate of Change) momentum = ta.mom(close, length_14) momentum_pct = (momentum / close ) * 100 // 6. Rate of Change (ROC) roc = ta.roc(close, length_14) // 7. Commodity Channel Index (CCI) cci = ta.cci(close, length_20) // 8. Money Flow Index (MFI) mfi = ta.mfi(close, length_14) mfi_centered = mfi - 50 // 9. Awesome Oscillator (AO) ao = ta.sma(hl2, 5) - ta.sma(hl2, 34) // 10. Accelerator Oscillator (AC) ac = ao - ta.sma(ao, 5) // 11. Chande Momentum Oscillator (CMO) cmo = ta.cmo(close, length_14) // 12. Detrended Price Oscillator (DPO) dpo = close - ta.sma(close, length_20) // 13. Price Oscillator (PPO) ppo = ta.sma(close, 12) - ta.sma(close, 26) ppo_pct = (ppo / ta.sma(close, 26)) * 100 // 14. TRIX trix_ema1 = ta.ema(close, length_14) trix_ema2 = ta.ema(trix_ema1, length_14) trix_ema3 = ta.ema(trix_ema2, length_14) trix = ta.roc(trix_ema3, 1) * 10000 // 15. Klinger Oscillator klinger = ta.ema(volume * (high + low + close) / 3, 34) - ta.ema(volume * (high + low + close) / 3, 55) // 16. Fisher Transform fisher_hl2 = 0.5 * (hl2 - ta.lowest(hl2, 10)) / (ta.highest(hl2, 10) - ta.lowest(hl2, 10)) - 0.25 fisher = 0.5 * math.log((1 + fisher_hl2) / (1 - fisher_hl2)) // 17. Stochastic RSI stoch_rsi = ta.stoch(rsi_14, rsi_14, rsi_14, length_14) stoch_rsi_centered = stoch_rsi - 50 // 18. Relative Vigor Index (RVI) rvi_num = ta.swma(close - open) rvi_den = ta.swma(high - low) rvi = rvi_den != 0 ? rvi_num / rvi_den : 0 // 19. Balance of Power (BOP) bop = (close - open) / (high - low) // |----- TREND INDICATORS (10 indicators) -----| // // 20. Simple Moving Average Momentum sma_20 = ta.sma(close, length_20) sma_momentum = ((close - sma_20) / sma_20) * 100 // 21. Exponential Moving Average Momentum ema_20 = ta.ema(close, length_20) ema_momentum = ((close - ema_20) / ema_20) * 100 // 22. Parabolic SAR sar = ta.sar(0.02, 0.02, 0.2) sar_trend = close > sar ? 1 : -1 // 23. Linear Regression Slope lr_slope = ta.linreg(close, length_20, 0) - ta.linreg(close, length_20, 1) // 24. Moving Average Convergence (MAC) mac = ta.sma(close, 10) - ta.sma(close, 30) // 25. Trend Intensity Index (TII) tii_sum = 0.0 for i = 1 to length_20 tii_sum += close > close ? 1 : 0 tii = (tii_sum / length_20) * 100 // 26. Ichimoku Cloud Components ichimoku_tenkan = (ta.highest(high, 9) + ta.lowest(low, 9)) / 2 ichimoku_kijun = (ta.highest(high, 26) + ta.lowest(low, 26)) / 2 ichimoku_signal = ichimoku_tenkan > ichimoku_kijun ? 1 : -1 // 27. MESA Adaptive Moving Average (MAMA) mama_alpha = 2.0 / (length_20 + 1) mama = ta.ema(close, length_20) mama_momentum = ((close - mama) / mama) * 100 // 28. Zero Lag Exponential Moving Average (ZLEMA) zlema_lag = math.round((length_20 - 1) / 2) zlema_data = close + (close - close ) zlema = ta.ema(zlema_data, length_20) zlema_momentum = ((close - zlema) / zlema) * 100 // |----- VOLUME INDICATORS (6 indicators) -----| // // 29. On-Balance Volume (OBV) obv = ta.obv // 30. Volume Rate of Change (VROC) vroc = ta.roc(volume, length_14) // 31. Price Volume Trend (PVT) pvt = ta.pvt // 32. Negative Volume Index (NVI) nvi = 0.0 nvi := volume < volume ? nvi + ((close - close ) / close ) * nvi : nvi // 33. Positive Volume Index (PVI) pvi = 0.0 pvi := volume > volume ? pvi + ((close - close ) / close ) * pvi : pvi // 34. Volume Oscillator vol_osc = ta.sma(volume, 5) - ta.sma(volume, 10) // 35. Ease of Movement (EOM) eom_distance = high - low eom_box_height = volume / 1000000 eom = eom_box_height != 0 ? eom_distance / eom_box_height : 0 eom_sma = ta.sma(eom, length_14) // 36. Force Index force_index = volume * (close - close ) force_index_sma = ta.sma(force_index, length_14) // |----- VOLATILITY INDICATORS (10 indicators) -----| // // 37. Average True Range (ATR) atr = ta.atr(length_14) atr_pct = (atr / close) * 100 // 38. Bollinger Bands Position bb_basis = ta.sma(close, length_20) bb_dev = 2.0 * ta.stdev(close, length_20) bb_upper = bb_basis + bb_dev bb_lower = bb_basis - bb_dev bb_position = bb_dev != 0 ? (close - bb_basis) / bb_dev : 0 bb_width = bb_dev != 0 ? (bb_upper - bb_lower) / bb_basis * 100 : 0 // 39. Keltner Channels Position kc_basis = ta.ema(close, length_20) kc_range = ta.ema(ta.tr, length_20) kc_upper = kc_basis + (2.0 * kc_range) kc_lower = kc_basis - (2.0 * kc_range) kc_position = kc_range != 0 ? (close - kc_basis) / kc_range : 0 // 40. Donchian Channels Position dc_upper = ta.highest(high, length_20) dc_lower = ta.lowest(low, length_20) dc_basis = (dc_upper + dc_lower) / 2 dc_position = (dc_upper - dc_lower) != 0 ? (close - dc_basis) / (dc_upper - dc_lower) : 0 // 41. Standard Deviation std_dev = ta.stdev(close, length_20) std_dev_pct = (std_dev / close) * 100 // 42. Relative Volatility Index (RVI) rvi_up = ta.stdev(close > close ? close : 0, length_14) rvi_down = ta.stdev(close < close ? close : 0, length_14) rvi_total = rvi_up + rvi_down rvi_volatility = rvi_total != 0 ? (rvi_up / rvi_total) * 100 : 50 // 43. Historical Volatility hv_returns = math.log(close / close ) hv = ta.stdev(hv_returns, length_20) * math.sqrt(252) * 100 // 44. Garman-Klass Volatility gk_vol = math.log(high/low) * math.log(high/low) - (2*math.log(2)-1) * math.log(close/open) * math.log(close/open) gk_volatility = math.sqrt(ta.sma(gk_vol, length_20)) * 100 // 45. Parkinson Volatility park_vol = math.log(high/low) * math.log(high/low) parkinson = math.sqrt(ta.sma(park_vol, length_20) / (4 * math.log(2))) * 100 // 46. Rogers-Satchell Volatility rs_vol = math.log(high/close) * math.log(high/open) + math.log(low/close) * math.log(low/open) rogers_satchell = math.sqrt(ta.sma(rs_vol, length_20)) * 100 // |----- OSCILLATOR INDICATORS (5 indicators) -----| // // 47. Elder Ray Index elder_bull = high - ta.ema(close, 13) elder_bear = low - ta.ema(close, 13) elder_power = elder_bull + elder_bear // 48. Schaff Trend Cycle (STC) stc_macd = ta.ema(close, 23) - ta.ema(close, 50) stc_k = ta.stoch(stc_macd, stc_macd, stc_macd, 10) stc_d = ta.ema(stc_k, 3) stc = ta.stoch(stc_d, stc_d, stc_d, 10) // 49. Coppock Curve coppock_roc1 = ta.roc(close, 14) coppock_roc2 = ta.roc(close, 11) coppock = ta.wma(coppock_roc1 + coppock_roc2, 10) // 50. Know Sure Thing (KST) kst_roc1 = ta.roc(close, 10) kst_roc2 = ta.roc(close, 15) kst_roc3 = ta.roc(close, 20) kst_roc4 = ta.roc(close, 30) kst = ta.sma(kst_roc1, 10) + 2*ta.sma(kst_roc2, 10) + 3*ta.sma(kst_roc3, 10) + 4*ta.sma(kst_roc4, 15) // 51. Percentage Price Oscillator (PPO) ppo_line = ((ta.ema(close, 12) - ta.ema(close, 26)) / ta.ema(close, 26)) * 100 ppo_signal = ta.ema(ppo_line, 9) ppo_histogram = ppo_line - ppo_signal // |----- PLOT MAIN INDICATORS -----| // // Plot key momentum indicators plot(rsi_centered, title="01_RSI_Centered", color=color.purple, linewidth=1) plot(stoch_centered, title="02_Stoch_Centered", color=color.blue, linewidth=1) plot(williams_r, title="03_Williams_R", color=color.red, linewidth=1) plot(macd_histogram, title="04_MACD_Histogram", color=color.orange, linewidth=1) plot(cci, title="05_CCI", color=color.green, linewidth=1) // Plot trend indicators plot(sma_momentum, title="06_SMA_Momentum", color=color.navy, linewidth=1) plot(ema_momentum, title="07_EMA_Momentum", color=color.maroon, linewidth=1) plot(sar_trend, title="08_SAR_Trend", color=color.teal, linewidth=1) plot(lr_slope, title="09_LR_Slope", color=color.lime, linewidth=1) plot(mac, title="10_MAC", color=color.fuchsia, linewidth=1) // Plot volatility indicators plot(atr_pct, title="11_ATR_Pct", color=color.yellow, linewidth=1) plot(bb_position, title="12_BB_Position", color=color.aqua, linewidth=1) plot(kc_position, title="13_KC_Position", color=color.olive, linewidth=1) plot(std_dev_pct, title="14_StdDev_Pct", color=color.silver, linewidth=1) plot(bb_width, title="15_BB_Width", color=color.gray, linewidth=1) // Plot volume indicators plot(vroc, title="16_VROC", color=color.blue, linewidth=1) plot(eom_sma, title="17_EOM", color=color.red, linewidth=1) plot(vol_osc, title="18_Vol_Osc", color=color.green, linewidth=1) plot(force_index_sma, title="19_Force_Index", color=color.orange, linewidth=1) plot(obv, title="20_OBV", color=color.purple, linewidth=1) // Plot additional oscillators plot(ao, title="21_Awesome_Osc", color=color.navy, linewidth=1) plot(cmo, title="22_CMO", color=color.maroon, linewidth=1) plot(dpo, title="23_DPO", color=color.teal, linewidth=1) plot(trix, title="24_TRIX", color=color.lime, linewidth=1) plot(fisher, title="25_Fisher", color=color.fuchsia, linewidth=1) // Plot more momentum indicators plot(mfi_centered, title="26_MFI_Centered", color=color.yellow, linewidth=1) plot(ac, title="27_AC", color=color.aqua, linewidth=1) plot(ppo_pct, title="28_PPO_Pct", color=color.olive, linewidth=1) plot(stoch_rsi_centered, title="29_StochRSI_Centered", color=color.silver, linewidth=1) plot(klinger, title="30_Klinger", color=color.gray, linewidth=1) // Plot trend continuation plot(tii, title="31_TII", color=color.blue, linewidth=1) plot(ichimoku_signal, title="32_Ichimoku_Signal", color=color.red, linewidth=1) plot(mama_momentum, title="33_MAMA_Momentum", color=color.green, linewidth=1) plot(zlema_momentum, title="34_ZLEMA_Momentum", color=color.orange, linewidth=1) plot(bop, title="35_BOP", color=color.purple, linewidth=1) // Plot volume continuation plot(nvi, title="36_NVI", color=color.navy, linewidth=1) plot(pvi, title="37_PVI", color=color.maroon, linewidth=1) plot(momentum_pct, title="38_Momentum_Pct", color=color.teal, linewidth=1) plot(roc, title="39_ROC", color=color.lime, linewidth=1) plot(rvi, title="40_RVI", color=color.fuchsia, linewidth=1) // Plot volatility continuation plot(dc_position, title="41_DC_Position", color=color.yellow, linewidth=1) plot(rvi_volatility, title="42_RVI_Volatility", color=color.aqua, linewidth=1) plot(hv, title="43_Historical_Vol", color=color.olive, linewidth=1) plot(gk_volatility, title="44_GK_Volatility", color=color.silver, linewidth=1) plot(parkinson, title="45_Parkinson_Vol", color=color.gray, linewidth=1) // Plot final oscillators plot(rogers_satchell, title="46_RS_Volatility", color=color.blue, linewidth=1) plot(elder_power, title="47_Elder_Power", color=color.red, linewidth=1) plot(stc, title="48_STC", color=color.green, linewidth=1) plot(coppock, title="49_Coppock", color=color.orange, linewidth=1) plot(kst, title="50_KST", color=color.purple, linewidth=1) // Plot final indicators plot(ppo_histogram, title="51_PPO_Histogram", color=color.navy, linewidth=1) plot(pvt, title="52_PVT", color=color.maroon, linewidth=1) // |----- Reference Lines -----| // hline(0, "Zero Line", color=color.gray, linestyle=hline.style_dashed, linewidth=1) hline(50, "Midline", color=color.gray, linestyle=hline.style_dotted, linewidth=1) hline(-50, "Lower Midline", color=color.gray, linestyle=hline.style_dotted, linewidth=1) hline(25, "Upper Threshold", color=color.gray, linestyle=hline.style_dotted, linewidth=1) hline(-25, "Lower Threshold", color=color.gray, linestyle=hline.style_dotted, linewidth=1) // |----- Enhanced Information Table -----| // if show_table and barstate.islast table_position = position.top_right table_text_size = table_size == "Tiny" ? size.tiny : table_size == "Small" ? size.small : size.normal var table info_table = table.new(table_position, 3, 18, bgcolor=color.new(color.white, 85), border_width=1, border_color=color.gray) // Headers table.cell(info_table, 0, 0, 'Category', text_color=color.black, text_size=table_text_size, bgcolor=color.new(color.blue, 70)) table.cell(info_table, 1, 0, 'Indicator', text_color=color.black, text_size=table_text_size, bgcolor=color.new(color.blue, 70)) table.cell(info_table, 2, 0, 'Value', text_color=color.black, text_size=table_text_size, bgcolor=color.new(color.blue, 70)) // Key Momentum Indicators table.cell(info_table, 0, 1, 'MOMENTUM', text_color=color.purple, text_size=table_text_size, bgcolor=color.new(color.purple, 90)) table.cell(info_table, 1, 1, 'RSI Centered', text_color=color.purple, text_size=table_text_size) table.cell(info_table, 2, 1, str.tostring(rsi_centered, '0.00'), text_color=color.purple, text_size=table_text_size) table.cell(info_table, 0, 2, '', text_color=color.blue, text_size=table_text_size) table.cell(info_table, 1, 2, 'Stoch Centered', text_color=color.blue, text_size=table_text_size) table.cell(info_table, 2, 2, str.tostring(stoch_centered, '0.00'), text_color=color.blue, text_size=table_text_size) table.cell(info_table, 0, 3, '', text_color=color.red, text_size=table_text_size) table.cell(info_table, 1, 3, 'Williams %R', text_color=color.red, text_size=table_text_size) table.cell(info_table, 2, 3, str.tostring(williams_r, '0.00'), text_color=color.red, text_size=table_text_size) table.cell(info_table, 0, 4, '', text_color=color.orange, text_size=table_text_size) table.cell(info_table, 1, 4, 'MACD Histogram', text_color=color.orange, text_size=table_text_size) table.cell(info_table, 2, 4, str.tostring(macd_histogram, '0.000'), text_color=color.orange, text_size=table_text_size) table.cell(info_table, 0, 5, '', text_color=color.green, text_size=table_text_size) table.cell(info_table, 1, 5, 'CCI', text_color=color.green, text_size=table_text_size) table.cell(info_table, 2, 5, str.tostring(cci, '0.00'), text_color=color.green, text_size=table_text_size) // Key Trend Indicators table.cell(info_table, 0, 6, 'TREND', text_color=color.navy, text_size=table_text_size, bgcolor=color.new(color.navy, 90)) table.cell(info_table, 1, 6, 'SMA Momentum %', text_color=color.navy, text_size=table_text_size) table.cell(info_table, 2, 6, str.tostring(sma_momentum, '0.00'), text_color=color.navy, text_size=table_text_size) table.cell(info_table, 0, 7, '', text_color=color.maroon, text_size=table_text_size) table.cell(info_table, 1, 7, 'EMA Momentum %', text_color=color.maroon, text_size=table_text_size) table.cell(info_table, 2, 7, str.tostring(ema_momentum, '0.00'), text_color=color.maroon, text_size=table_text_size) table.cell(info_table, 0, 8, '', text_color=color.teal, text_size=table_text_size) table.cell(info_table, 1, 8, 'SAR Trend', text_color=color.teal, text_size=table_text_size) table.cell(info_table, 2, 8, str.tostring(sar_trend, '0'), text_color=color.teal, text_size=table_text_size) table.cell(info_table, 0, 9, '', text_color=color.lime, text_size=table_text_size) table.cell(info_table, 1, 9, 'Linear Regression', text_color=color.lime, text_size=table_text_size) table.cell(info_table, 2, 9, str.tostring(lr_slope, '0.000'), text_color=color.lime, text_size=table_text_size) // Key Volatility Indicators table.cell(info_table, 0, 10, 'VOLATILITY', text_color=color.yellow, text_size=table_text_size, bgcolor=color.new(color.yellow, 90)) table.cell(info_table, 1, 10, 'ATR %', text_color=color.yellow, text_size=table_text_size) table.cell(info_table, 2, 10, str.tostring(atr_pct, '0.00'), text_color=color.yellow, text_size=table_text_size) table.cell(info_table, 0, 11, '', text_color=color.aqua, text_size=table_text_size) table.cell(info_table, 1, 11, 'BB Position', text_color=color.aqua, text_size=table_text_size) table.cell(info_table, 2, 11, str.tostring(bb_position, '0.00'), text_color=color.aqua, text_size=table_text_size) table.cell(info_table, 0, 12, '', text_color=color.olive, text_size=table_text_size) table.cell(info_table, 1, 12, 'KC Position', text_color=color.olive, text_size=table_text_size) table.cell(info_table, 2, 12, str.tostring(kc_position, '0.00'), text_color=color.olive, text_size=table_text_size) // Key Volume Indicators table.cell(info_table, 0, 13, 'VOLUME', text_color=color.blue, text_size=table_text_size, bgcolor=color.new(color.blue, 90)) table.cell(info_table, 1, 13, 'Volume ROC', text_color=color.blue, text_size=table_text_size) table.cell(info_table, 2, 13, str.tostring(vroc, '0.00'), text_color=color.blue, text_size=table_text_size) table.cell(info_table, 0, 14, '', text_color=color.red, text_size=table_text_size) table.cell(info_table, 1, 14, 'EOM', text_color=color.red, text_size=table_text_size) table.cell(info_table, 2, 14, str.tostring(eom_sma, '0.000'), text_color=color.red, text_size=table_text_size) // Key Oscillators table.cell(info_table, 0, 15, 'OSCILLATORS', text_color=color.purple, text_size=table_text_size, bgcolor=color.new(color.purple, 90)) table.cell(info_table, 1, 15, 'Awesome Osc', text_color=color.blue, text_size=table_text_size) table.cell(info_table, 2, 15, str.tostring(ao, '0.000'), text_color=color.blue, text_size=table_text_size) table.cell(info_table, 0, 16, '', text_color=color.red, text_size=table_text_size) table.cell(info_table, 1, 16, 'Fisher Transform', text_color=color.red, text_size=table_text_size) table.cell(info_table, 2, 16, str.tostring(fisher, '0.000'), text_color=color.red, text_size=table_text_size) // Summary Statistics table.cell(info_table, 0, 17, 'SUMMARY', text_color=color.black, text_size=table_text_size, bgcolor=color.new(color.gray, 70)) table.cell(info_table, 1, 17, 'Total Indicators: 52', text_color=color.black, text_size=table_text_size) regime_color = rsi_centered > 10 ? color.green : rsi_centered < -10 ? color.red : color.gray regime_text = rsi_centered > 10 ? "BULLISH" : rsi_centered < -10 ? "BEARISH" : "NEUTRAL" table.cell(info_table, 2, 17, regime_text, text_color=regime_color, text_size=table_text_size) This makes it the perfect “indicator backbone” for quantitative and systematic traders who want to prototype, combine, and test new regime detection models—especially in combination with the Markov Chain indicator. How to use this script with the Markov Chain for research and backtesting: Add the Enhanced Indicator Export to your chart. Every calculated indicator is available as an individual data stream. Connect the indicator(s) you want as custom input(s) to the Markov Chain’s “Custom Indicators” option. In the Markov Chain indicator’s settings, turn ON the custom indicator mode. For each of the three custom indicator inputs, select the exported plot from the Enhanced Export script—the menu lists all 45+ signals by name. This creates a powerful, modular regime-detection engine where you can mix-and-match momentum, trend, volume, or custom combinations for advanced filtering. Backtest regime logic directly. Once you’ve connected your chosen indicators, the Markov Chain script performs regime detection (Bull/Neutral/Bear) based on your selected features—not just price returns. The regime detection is robust, automatically normalized (using Z-score), and outputs bias (1, -1, 0) for plug-and-play integration. Export the regime bias for programmatic use. As described above, use input.source() in your Pine Script strategy or system and link the bias output. You can now filter signals, control trade direction/size, or design pairs-trading that respect true, indicator-driven market regimes. With this framework, you’re not limited to static or simplistic regime filters. You can rigorously define, test, and refine what “market regime” means for your strategies—using the technical features that matter most to you. Optimize your signal generation by backtesting across a universe of meaningful indicator blends. Enhance risk management with objective, real-time regime boundaries. Accelerate your research: iterate quickly, swap indicator components, and see results with minimal code changes. Automate multi-asset or pairs-trading by integrating regime context directly into strategy logic. Add both scripts to your chart, connect your preferred features, and start investigating your best regime-based trades—entirely within the TradingView ecosystem. References & Further Reading Ang, A., & Bekaert, G. (2002). “Regime Switches in Interest Rates.” Journal of Business & Economic Statistics, 20(2), 163–182. Hamilton, J. D. (1989). “A New Approach to the Economic Analysis of Nonstationary Time Series and the Business Cycle.” Econometrica, 57(2), 357–384. Markov, A. A. (1906). "Extension of the Limit Theorems of Probability Theory to a Sum of Variables Connected in a Chain." The Notes of the Imperial Academy of Sciences of St. Petersburg. Guidolin, M., & Timmermann, A. (2007). “Asset Allocation under Multivariate Regime Switching.” Journal of Economic Dynamics and Control, 31(11), 3503–3544. Murphy, J. J. (1999). Technical Analysis of the Financial Markets. New York Institute of Finance. Brock, W., Lakonishok, J., & LeBaron, B. (1992). “Simple Technical Trading Rules and the Stochastic Properties of Stock Returns.” Journal of Finance, 47(5), 1731–1764. Zucchini, W., MacDonald, I. L., & Langrock, R. (2017). Hidden Markov Models for Time Series: An Introduction Using R (2nd ed.). Chapman and Hall/CRC. On Quantitative Finance and Markov Models: Lo, A. W., & Hasanhodzic, J. (2009). The Heretics of Finance: Conversations with Leading Practitioners of Technical Analysis. Bloomberg Press. Patterson, S. (2016). The Man Who Solved the Market: How Jim Simons Launched the Quant Revolution. Penguin Press. TradingView Pine Script Documentation: www.tradingview.com TradingView Blog: “Use an Input From Another Indicator With Your Strategy” www.tradingview.com GeeksforGeeks: “What is the Difference Between Markov Chains and Hidden Markov Models?” www.geeksforgeeks.org What makes this indicator original and unique? - On‑chart, real‑time Markov. The chain is drawn directly on your chart. You see the current regime, its tendency to stay (self‑loop), and the usual next step (arrows) as bars confirm. - Source‑agnostic by design. The engine runs on any series you select via input.source() — price, your own oscillator, a composite score, anything you compute in the script. - Automatic normalization + regime mapping. Different inputs live on different scales. The script standardizes your chosen source and maps it into clear regimes (e.g., Bull / Bear / Neutral) without you micromanaging thresholds each time. - Rolling, bar‑by‑bar learning. Transition tendencies are computed from a rolling window of confirmed bars. What you see is exactly what the market did in that window. - Fast experimentation. Switch the source, adjust the window, and the Markov view updates instantly. It’s a rapid way to test ideas and feel regime persistence/switch behavior. Integrate your own signals (using input.source()) - In settings, choose the Source . This is powered by input.source() . - Feed it price, an indicator you compute inside the script, or a custom composite series. - The script will automatically normalize that series and process it through the Markov engine, mapping it to regimes and updating the on‑chart spheres/arrows in real time. Credits: Deep gratitude to @RicardoSantos for both the foundational Markov chain processing engine and inspiring open-source contributions, which made advanced probabilistic market modeling accessible to the TradingView community. Special thanks to @Alien_Algorithms for the innovative and visually stunning 3D sphere logic that powers the indicator’s animated, regime-based visualization. Disclaimer This tool summarizes recent behavior. It is not financial advice and not a guarantee of future results.
Penunjuk Pine Script®
oleh Fractalyst
5
Nifty Power -> Nifty 50 chart + EMA of RSI + avg volume strategyThis strategy works in 1 hour candle in Nifty 50 chart. In this strategy, upward trade takes place when there is a crossover of RSI 15 on EMA50 of RSI 15 and volume is greater than volume based EMA21. On the other hand, lower trade takes place when RSI 15 is less than EMA50 of RSI 15. Please note that there is no stop loss given and also that the trade will reverse as per the trend. Sometimes on somedays, there will be no trades. Also please note that this is an Intraday strategy. The trade if taken closes on 15:15 in Nifty 50. This strategy can be used for swing trading. Some pine script code such as supertrend and ema21 of close is redundant. Try not to get confused as only EMA50 of RSI 15 is used and EMA21 of volume is used. I am using built-in pinescript indicators and there is no special calculation done in the pine script code. I have taken numbars variable to count number of candles. For example, if you have 30 minuite chart then numbars variable will count the intraday candles accordingly and the same for 1 hour candles.
Strategi Pine Script®
oleh Archer_Trade
CleanBreak Lines (Break + First Retest)CleanBreak lines draws one robust support line (green) from swing lows and one robust resistance line (red) from swing highs, then optionally signals a confirmed break and the first clean retest back to that line. Lines are scored with a transparent W-Score (0–100) so traders can judge quality at a glance. The script is non-repainting and uses only confirmed bar data. What it does Auto-builds two trendlines that aim to represent meaningful support and resistance. Uses a median-based slope so outliers and single spikes do not distort the line. Computes a W-Score per line from three things: touches, span (how long it held), and respect (staying on the correct side). Optionally triggers a single, tightly-gated signal on Break + First Retest. How it works (plain English) Detect recent swing highs and swing lows. Fit one line through highs and one through lows using a robust, median-style slope estimate. Score each line: more clean touches and longer span raise the W-Score; frequent violations lower it. A break requires a candle close beyond the line by a small ATR margin. A first retest requires price to come back to the line within a limited number of bars and hold on close. A single arrow may print on that confirmed retest, with optional alerts. What it is not Not a prediction model and not a promises-of-profit tool. Not a multi-signal spammer: by design it aims to allow one retest entry per break. Not a regression channel or machine-learning system. How to use At a glance: treat the green line as candidate support and the red line as candidate resistance. Conservative approach: wait for a break on close and then the first retest to hold; use the arrow as a prompt, not a command. Context-only mode: hide arrows in Style if you want the lines and W-Score only. Inputs (brief) Core: Swing Length, Max Pivots, Min Touches, Min Span Bars. Scoring: Touches Max (cap), Weights for touches vs span, Min W-Score to arm. Break and Retest: Break Margin x ATR, Retest Tolerance x ATR, Retest Window (bars). Visuals: Show Labels, Show Table, Line Width, Fade When Refit. Recommended presets Cleaner, fewer signals: Min Touches 4–5, Min Span Bars 100–150, Min W-Score 70–80, Break Margin 0.40–0.60 ATR, Retest Tolerance 0.10–0.15 ATR, Retest Window 8–12 bars. Lines-only: keep defaults and uncheck the two plotshapes in Style. Alerts CB Long Retest: break above the red line and first retest holds. CB Short Retest: break below the green line and first retest holds. Use “Once per bar close” for consistency. On-chart table (if enabled) RES / SUP: W-Score and distance from price in ATR terms. Status: “Waiting Long RT”, “Waiting Short RT”, or “Idle”. Thresholds: MinScore and Retest bars for quick context. Timeframes Works well on 1h to 1D. On very low timeframes, raise Break Margin x ATR to reduce whipsaw effects. On higher timeframes, increase Min Touches and Min Span Bars. Non-repainting policy All logic uses confirmed pivots and confirmed bar closes. Breaks and retests are validated on close; alerts reference only confirmed conditions. No lookahead in any request.security call. Original implementation focused on a median-based robust slope for auto trendlines, plus a transparent W-Score and a single retest gate. Disclosure This script is for education and charting. It does not guarantee outcomes, and past behavior does not imply future results. Always validate on historical data and practice risk management.
Penunjuk Pine Script®
oleh Finntech1
Pro Market Toolkit (TH) v2.4 — S/R + Zones + ATR Bands + Alertsรายละเอียด (ภาษาไทย): อินดิเคเตอร์ชุดเครื่องมือครบวงจรสำหรับนักเทรด คำนวณ แนวรับ–แนวต้าน (Support / Resistance) อัตโนมัติจากสวิง (Pivot High/Low) สร้าง Supply/Demand Zones จาก ATR เพื่อหาพื้นที่กลับตัวสำคัญ วาดเส้น Moving Average และ ATR Bands เพื่อประเมินแนวโน้มและความผันผวน แสดงสัญญาณ Breakout และ Bounce/Reject อย่างชัดเจนบนกราฟ รองรับ Alerts สำหรับ 4 เงื่อนไขสำคัญ: Breakout ขึ้น/ลง, Demand Bounce, Supply Reject มีตารางแสดง Trend และค่า ATR ปัจจุบัน เหมาะสำหรับผู้ที่ต้องการดูแนวโน้ม, หาจุดเข้า/ออก และรับการแจ้งเตือนอัตโนมัติ โดยไม่ต้องเฝ้ากราฟตลอดเวลา Description (English): A comprehensive trading toolkit indicator for professional traders. Automatically detects Support/Resistance levels using swing pivots Generates Supply/Demand Zones based on ATR to highlight potential reversal areas Plots Moving Average and ATR Bands for trend and volatility analysis Displays clear signal markers for Breakouts and Zone Bounces/Rejects Provides Alerts for 4 key conditions: Breakout Up/Down, Demand Bounce, Supply Reject Includes an on-chart table showing the current Trend and ATR value Ideal for traders who want automatic key levels, zones, and signal alerts without the need to monitor the chart constantly.
Penunjuk Pine Script®
oleh chadayu77
Currency Strength v3.0Currency Strength v3.0 Summary The Currency Strength indicator is a powerful tool designed to gauge the relative strength of major and emerging market currencies. By plotting the True Strength Index (TSI) of various currency indices, it provides a clear visual representation of which currencies are gaining momentum and which are losing it. This indicator automatically detects the currency pair on your chart and highlights the corresponding strength lines, simplifying analysis and helping you quickly identify potential trading opportunities based on currency dynamics. Key Features Comprehensive Currency Analysis: Tracks the strength of 19 currencies, including major pairs and several emerging market currencies. Automatic Pair Detection: Intelligently identifies the base and quote currency of the active chart, automatically highlighting the relevant strength lines. Dynamic Coloring: The base currency is consistently colored blue, and the quote currency is colored gold, making it easy to distinguish between the two at a glance. Non-Repainting TSI Calculation: Uses the True Strength Index (TSI) for smooth and reliable momentum readings that do not repaint. Customizable Settings: Allows for adjustment of the fast and slow periods for the TSI calculation to fit your specific trading style. Clean Interface: Features a minimalist legend table that only displays the currencies relevant to your current chart, keeping your workspace uncluttered. How It Works The indicator pulls data from major currency indices (like DXY for the US Dollar and EXY for the Euro). For currencies that don't have a dedicated index, it uses their USD pair (e.g., USDCNY) and inverts the calculation to derive the currency's strength relative to the dollar. It then applies the True Strength Index (TSI) to this data. The TSI is a momentum oscillator that is less volatile than other oscillators, providing a more reliable measure of strength. The resulting values are plotted on the chart, allowing you to see how different currencies are performing against each other in real-time. How to Use Trend Confirmation: When the base currency's line is rising and above the zero line, and the quote currency's line is falling, it can confirm a bullish trend for the pair. The opposite would suggest a bearish trend. Identifying Divergences: Look for divergences between the currency strength lines and the price action of the pair. For example, if the price is making higher highs but the base currency's strength is making lower highs, it could signal a potential reversal. Crossovers: A crossover of the base and quote currency lines can signal a shift in momentum. A bullish signal occurs when the base currency line crosses above the quote currency line. A bearish signal occurs when it crosses below. Overbought/Oversold Levels: The horizontal dashed lines at 0.5 and -0.5 can be used as general guides for overbought and oversold conditions, respectively. Strength moving beyond these levels may indicate an unsustainable move that is due for a correction. Settings Fast Period: The short-term period for the TSI calculation. Default is 7. Slow Period: The long-term period for the TSI calculation. Default is 15. Index Source: The price source used for the calculations (e.g., Close, Open). Default is Close. Base Currency Color: The color for the base currency line. Default is Royal Blue. Quote Currency Color: The color for the quote currency line. Default is Goldenrod. Disclaimer This indicator is intended for educational and analytical purposes only. It is not financial advice. Trading involves substantial risk, and past performance is not indicative of future results. Always conduct your own research and risk management before making any trading decisions.
Penunjuk Pine Script®
oleh DOSALGO
8