Muka Surat 2 | Resistance_level — Penunjuk dan Strategi

Dynamic Support And Resistance [CC]The Dynamic Support And Resistance Indicator was created by Mike Siroky (Stocks and Commodities pgs 14-18) and this is a handy indicator that will show you useful support and resistance levels no matter how the stock is doing right now. I have color coded the middle line to show buy and sell signals so buy when the line turns green and sell when it turns red. Let me know if there are any other indicators you want me to publish!

Projected Support And Resistance [CC]Projected Support And Resistance is a custom indicator of mine loosely based on the work done by Ketan Asher (Stocks and Commodities Bonus Issue 2021 pgs 12-14) and generally speaking this does a pretty good job of telling you what the future behavior of the stock will be. As the lines widen apart, there will be either upward or downward momentum. Buy when the line turns green and sell when it turns red. Let me know what other indicators you would like to see me publish!

[RickAtw] O1 Opening Market Line This indicator helps to identify current support and resistance based on the opening of the Asian, London and New York sessions. Function You can make good trade entries based on these lines. Shows daily and weekly openings of each session It will also help you to look at which session you are currently trading) Purple ----> Asian session Red ----> London session Blue ----> New York session Key Signal buy ---> A strong buy signal is a bounce from the low and the presence of a weekly or day open line. sell ---> A strong sell signal is a bounce from the maximum and the presence of a weekly or day open line. P.S. Be sure to test on your pair! Remarks This will help you determine the approximate area of support and resistance. Since we cannot look into the future, it does not inform you about the exact records, but a possible change in trends. Readme In real life, I am a professional investor. And I check each of my indicators on my portfolio and how effective it is. I will not post a non-working method. The main thing is to wait for the beginning of trends and make money! I would be grateful if you subscribe ❤️

Breach v3 Beta This is a script that allows you to toggle multiple indicators related to support and resistance, CCI, and Breaches (Crossovers based on William's Fractals). How to use: Custom Timeframe (Minutes) - To compare to current candles Crossovers on custom - Crossovers and breaches on custom timeframe (Blue Triangle up) Crossunders on custom - Crossunders and breaches on custom timeframe (Blue Triangle down) Crossovers on current candles - Crossovers and breaches on current timeframe/Candlestick (Purple Triangle up) Crossunder on current candles - Crossunders and breaches on current timeframe/Candlestick (Purple Triangle down) CCI - CCI Trend indicator (red/green dots) CCI - window - Input CCI window size in candlesticks (Integer) Resistance on current candles - Resistance on current candles (Green Line) Support on current candles - Support on current candles (Red Line) Resistance - Custom - Resistance line based on Custom Timeframe (Blue Line) Support - Custom - Support line based on Custom Timeframe (Purple Line) Price on current support/resistance - Label displaying the price of current (candlestick) support/resistance Price on custom support/resistance - Label displaying the price of custom (Custom Timeframe) support/resistance

Moving Averages as Support Resistance MTF Hello Traders! As most of you know that Moving Averages with the lengths 50, 100, 150 and 200 are very important. We should use these this moving averages to figure out S/R levels, the possible reversals points, trend direction etc. we should check these moving averages on Higher Time Frames as well. for example if you look at the chart with 5mins time frame, you should also check it in 1hour and 4hour time frames to see to big picture and main trend. this is important as trend is your friend and you should not take positions against the trend. I developed this script to show them clearly and make the chart understandable. 1 resistance line above the price and 1 support line below the price, it shows the moving average type, length, time frame and S/R level. You have option to show SMA or EMA and to include/exclude current time frame, because you may want to see only MAs from higher time frames. you should set higher time frames accordingly. if you add all moving averages for current and higher time frame the chart looks very crowded as following example: The script makes it clear to understand the chart better, here an example: It can show when S/R was broken and you get alert. here an example: You have coloring and style options, you can change line style and colors as you wish: Enjoy!

Silen's Pseudo VPVR / Pseudo Volume Profile Custom Range Disclamer: This indicator does not use actual Volume data and doesn't display any Volume data. It creates a pseudo Volume Profile by counting the high-low-2 values of candles and simulates something that is similar to a Volume Profile without using any Volume data. Core facts: Creates a pseudo Volume Profile by counting values of candles and sorting them into a Profile. Works for charts that don't provide any Volume Information. Can display up to 5 different Value Levels. Value level colors are (from largest to smallest level): Red, Orange, Yellow, Green, Blue. The Value levels can be used as Support and Resistance indicators. The Custom Range of the Volume Profile can be adjusted from 10 to 1500 bars. Much faster than the other custom pseudo VPVRs out there. Shortcomings: As the chart progresses with bars the line positions will distort to the left side. Refreshing the tradingview page or switching to another time interval fixes this. I might fix this issue in the future. Does not use actual Volume nor display actual Volume. Note: For those who wondered what happened to my first version of this indicator: It got taken down by Tradingview because it was misleading as to using the words "Volume Profile" and "Visible Range". I fully support their decision and I hope I could clear any misunderstandings! Give their team a heads up for the hard work they're doing in keeping this place clean and well organized! Enjoy! :)

[PX] External Level Hello everyone, today I'd like to share a script, which enables you to use external logic to plot levels on your chart. How does it work? The concept is based on two scripts. One script, which uses an external input as a trigger to print a new level and one script that calculates an output, which will be fetched. Sounds complicated? It really is not! Let's take a closer look. // This source code is subject to the terms of the Mozilla Public License 2.0 at mozilla.org // © paaax //@version=4 study("RSI OS/OB") l = input(14, "RSI Length") ob = input(70, "Overbought") os = input(30, "Oversold") r = rsi(close, l) hline(ob) hline(os) plot(r, "RSI", color=color.orange) // The following plot produces an output, which will be fetched the "External Level"-script. // It evaluates to one of the following three values: 1.0, -1.0 or 0.0 plot(crossover(r, ob) ? 1.0 : crossunder(r, os) ? -1.0 : 0.0, "Output", transp=100) The example script above uses an RSI and two threshold levels (70 and 30). The logic here is, that whenever the RSI is crossing down the lower threshold or crossing up the upper threshold we'd consider the current movement to be either oversold or overbought. Therefore, it's a point of interest, which we could visualize with a level. The script creates an output when the crossover or crossunder of a threshold happens. A crossover would result in a value of 1.0, a crossunder in a value of -1.0. In all other cases the value would be 0.0. The output of the RSI script would then be used as an input of the External Level script, which has a "Source"-parameter in its input-section. If the fetched input shows 1.0, then the script prints a resistance level. If it shows -1.0 a support level will be printed. And that's basically it. A very simple approach to print levels on your chart with an infinite number of use cases. For example, you could use fetch outputs from a MACD script, MA script, outputs based on volume or price movement. Just remember the output has to evaluate to either 1.0 or -1.0 and has to be selected in the input-section. Hope that might be useful to some of you :) Please click the "Like"-button and follow me for future open-source script publications. If you are looking for help with your custom PineScript development, don't hesitate to contact me directly here on Tradingview or through the link in my signature :)

Support and Resistance Multi Time frame Simple indicator showing the support and resistance on Daily, Weekly and Monthly time frames no matter what time frame you're currently on by highlighting the highest and lowest points on each over the last 34 bars. Daily support and resistance are coloured green. support and resistance are coloured yellow. Monthly support and resistance are coloured red. For best results check where multiple support and resistance areas line up and combine with another indicator for example oscillators to gauge if the support or resistance will reverse the market.

[fikira] Fibonacci MA / EMA's (Fibma / Fibema)I've made SMA/EMA's NOT based on the principle of the 2(1+1), 3(2+1), 5(3+2), 8(5+3), 13(8+5), 21(13+8), 34(21+13), 55(34+21), ... numbers, but based on these following Fibonacci numbers: 0,236 0,382 0,500 0,618 0,764 1 Ending up with 2 series of Fibma / Fibema: "Tiny Fibma / Fibema": 24, 38, 50, 62, 76, 100 "Big Fibma / Fibema": 236, 382, 500, 618, 764, 1000 IMHO it is striking how these lines often act as Resistance/Support, although (except the 50, 100 & 500) they are not typical MA/EMA's. They perform very well on every Timeframe as well! Week: 3 Days: 1 Day: 4h: 1h: Even on the 15 minutes: Or 5': Things to watch for: Price compared to the Tiny or Big Fibma / Fibema (below or above) Price compared to important Fibma / Fibema (for example below or above MA 236, MA 764, MA 1000, ...) Crossing of Fibma / Fibema 24/76, 236/764 and 38/62, 382/618 (bullish crossover = Lime coloured "cloud", bearish crossunder = Red coloured "cloud"), ... I've made a change in barcolor if the close crosses the "Big Fibma / Fibema 500" If price closes above MA/EMA 500, the first bar is yellow coloured, if price stays above this level, candles are coloured lime/orange (= very bullish) If price closes under MA/EMA 500, the first bar is purple, if price stays under this level, candles are standard coloured (= very bearish) Strategy will follow, Thanks!