Mulakan

Scalpingcrypto

Trading Days - TraderSectHow it works: Customization: You can toggle each day of the week on or off in the settings panel. Dynamic Updating: The box starts at the first candle of the day and expands its height (high/low) and width (time) in real-time as new bars form. Multi-Timeframe: It works on any timeframe lower than the Daily (1m, 5m, 1h, etc.). On a Daily chart, it will simply highlight the individual bar. Visuals: You can adjust the transparency and colors of the background and borders directly in the script inputs.
Penunjuk Pine Script®
oleh dtaniguchi69
Anomaly Rejection Channel [ARC] ProAnomaly Rejection Channel Pro 📝 Description The Anomaly Rejection Channel Pro is an advanced, multi-dimensional trading indicator designed to identify high-probability reversal zones (liquidity traps) and price anomalies. Instead of relying on a single metric, ARC Pro combines dynamic volatility channels (VWMA + ATR), volume spread analysis, price action anatomy (wick rejection), and Multi-TimeFrame (MTF) alignment to filter out market noise. It excels at spotting "Bull Traps" and "Bear Traps"—moments where price breaches a key volatility band but fails to sustain momentum due to volume exhaustion or climax, signaling a high likelihood of a reversal. Whether you are scalping on lower timeframes or swing trading, the built-in presets and adaptive volatility logic dynamically adjust to current market conditions. ⚙️ Settings & Parameters 📊 Channel Settings Parameter Preset: Quick-select profiles (Conservative, Balanced, Aggressive, Scalping) that automatically adjust the ATR multiplier, wick requirements, and volume thresholds. VWMA/ATR Period: The lookback period for calculating the baseline Volume-Weighted Moving Average and the Average True Range. Base ATR Multiplier: Defines the width of the channel. A higher value requires a larger price deviation to trigger a signal. Adaptive Multiplier (Volatility): When enabled, the indicator automatically narrows the channel during low volatility and widens it during high volatility to prevent false signals. 🎯 Signal Filters Volume MA Period: The baseline period to determine relative volume strength. Volume Exhaustion / Climax Ratio: The specific multipliers used to detect abnormal volume behavior (either drying up or spiking) at the channel extremes. Min Wick % of Range: The minimum required rejection wick size relative to the total candle body (e.g., a value of 0.4 means the rejection wick must be at least 40% of the candle's total range). Min Absolute Wick Size (points): An optional hard filter to ignore signals if the rejection wick is too small in absolute point value. 📈 Trend Context Filter Signals by Trend: Blocks signals that go against the directional momentum of the built-in Trend Line. Trend Line Period: The smoothing period for the internal trend-detection logic. Allow Counter-Trend Signals: If enabled, the indicator will print signals against the main trend, which is useful for aggressive mean-reversion trading. ✅ Signal Confirmation Require Next Candle Confirmation: The signal is only validated if the subsequent candle confirms the reversal direction. Confirmation: Close Inside Channel: Requires the confirming candle to close back inside the ARC bands, validating the "trap". Signal Delay (bars): Shifts the visual signal X bars forward (useful for aligning alerts with external execution bots). 🌐 Multi-TimeFrame (MTF) Use Higher TF Confirmation: Syncs your current chart with a higher timeframe to ensure macro-trend alignment. Higher TimeFrame: Select the MTF resolution (e.g., 240 for 4-Hour). MTF Mode: Choose how the higher timeframe filters the local chart: Trend Only: Local signals must align with the MTF trend. Rejection Only: Local signals require an active rejection/trap on the MTF. Trend+Rejection: Combines both filters for maximum accuracy. Strict Mode: Blocks all signals if the MTF status shows a "Conflict". 🎨 Signal Display Show Signal Strength (Color): Color-codes the TRAP labels based on confluence (Red/Green for strong, Orange/Lime for moderate). Mode: Trade Breakouts: Reverses the logic to trade momentum breakouts instead of mean-reversion traps. Alerts: Configure to fire once per bar or on every tick.
Penunjuk Pine Script®
oleh Volatryx
Stabilized HMA ScalperStabilized HMA Scalper / Stab. HMA 2.0 Stabilized HMA Scalper is a visual trend-structure overlay indicator designed to highlight directional momentum, trend alignment, and market state through a combination of adaptive moving averages and contextual visual cues. The indicator blends a Hull Moving Average (HMA) for responsiveness with an ALMA-based baseline filter to stabilize trend interpretation and reduce noise. The result is a clean, visually expressive framework for reading market structure directly on the price chart. Core Design Philosophy This script is built around trend confirmation and state visualization, not prediction or automation. All elements are calculated on confirmed bar closes and do not repaint. The indicator focuses on three analytical dimensions: 1. Dual Moving Average Structure Hull Moving Average (HMA) Acts as the primary momentum curve. Designed for fast reaction to directional changes. Slope behavior is used to infer momentum expansion or contraction. ALMA Baseline Filter Provides a stabilizing reference for broader trend context. Helps distinguish directional movement from short-term fluctuations. Used as a structural filter rather than a trigger mechanism. 2. Trend State Visualization When HMA slope and price position relative to the ALMA baseline align, the indicator visually highlights the active market state: Bullish alignment: upward momentum with supportive structure Bearish alignment: downward momentum with confirming structure Neutral / range: mixed conditions or transitional phases A dynamic gradient fill between HMA and ALMA visually reinforces this alignment, offering an immediate understanding of trend strength and continuity. 3. Visual Markers & Labels Discrete chart markers may appear at moments when momentum structure transitions into a new aligned state. These markers are contextual annotations, intended to draw attention to changes in trend conditions rather than to provide standalone decisions. They are based solely on historical price data and are fully non-repainting. Dashboard An optional on-chart dashboard summarizes the current market state classification (Bullish / Bearish / Range) based on the internal trend logic. Position and size are fully configurable. Designed for at-a-glance situational awareness. Reflects the same logic used in the chart visuals. Usage Disclaimer This indicator is provided for technical analysis and educational purposes only. It does not generate financial advice or guarantee outcomes and should be used as part of a broader analytical workflow.
Penunjuk Pine Script®
oleh Horazio
Smart RSI Money Flow - Core Bands V1.01SMART RSI – Money Flow Bands (Technical Overview) 1. Background: RSI and Its Behavior on Lower Timeframes The Relative Strength Index (RSI) originally is a momentum oscillator calculated from average gains and losses over a selected period. In its standard form, RSI is derived solely from price changes; it does not incorporate volume data or order-flow information in its formula. Because RSI is price-based, its interpretation depends strongly on the timeframe: • On higher timeframes, each bar aggregates more trading activity, and RSI tends to behave more smoothly. • On lower timeframes (1-hour down to intraday scalping intervals), price fluctuations are quicker, and RSI becomes more sensitive to short-term noise. This does not imply that RSI becomes invalid, but that its signals on fast charts can be more reactive and may benefit from additional context such as volume behavior or structural information. 2. Purpose of This Indicator This indicator extends the classical RSI by adding information that RSI does not include: • Mapping RSI values into price-based bands instead of the 0–100 oscillator space. • Retrieving lower timeframe volume data and separating it into buy and sell components. • Comparing the slope (angle) of price movement with the slope of buy and sell volume. The goal is to provide a structural interpretation of where price sits relative to RSI conditions and how volume is behaving on a lower timeframe. 3. Technical Differences Compared to Classical RSI A) Classical RSI • Input: price only (usually close). • Output: normalized oscillator between 0 and 100. • Does not incorporate intra-bar volume distribution. • Does not separate buy/sell volume. B) SMART RSI – Money Flow Bands 1) RSI-to-Price Mapping Converts RSI values into upper/lower price bands using recent price extremes. 2) Lower Timeframe Volume Decomposition Retrieves LTF data and splits each bar’s volume into buy (close>open) and sell (close
Penunjuk Pine Script®
oleh ata_sabanci
Weekend Hunter Ultimate v6.2 Weekend Hunter Ultimate v6.2 - Automated Crypto Weekend Trading System OVERVIEW: Specialized trading strategy designed for cryptocurrency weekend markets (Saturday-Sunday) when institutional traders are typically offline and market dynamics differ significantly from weekdays. Optimized for 15-minute timeframe execution with multi-timeframe confluence analysis. KEY FEATURES: - Weekend-Only Trading: Automatically activates during configurable weekend hours - Dynamic Leverage: 5-20x leverage adjusted based on market safety and signal confidence - Multi-Timeframe Analysis: Combines 4H trend, 1H momentum, and 15M execution - 10 Pre-configured Crypto Pairs: BTC, ETH, LINK, XRP, DOGE, SOL, AVAX, PEPE, TON, POL - Position & Risk Management: Max 4 concurrent positions, -30% account protection - Smart Trailing Stops: Protects profits when approaching targets RISK MANAGEMENT: - Maximum daily loss: 5% (configurable) - Maximum weekend loss: 15% (configurable) - Per-position risk: Capped at 120-156 USDT - Emergency stops for flash crashes (8% moves) - Consecutive loss protection (4 losses = pause) TECHNICAL INDICATORS: - CVD (Cumulative Volume Delta) divergence detection - ATR-based dynamic stop loss and take profit - RSI, MACD, Bollinger Bands confluence - Volume surge confirmation (1.5x average) - Weekend liquidity adjustments INTEGRATION: - Designed for Bybit Futures (0.075% taker fee) - WunderTrading webhook compatibility via JSON alerts - Minimum position size: 120 USDT (Bybit requirement) - Initial capital: $500 recommended TARGET METRICS: - Win rate target: 65% - Average win: 5.5% - Average loss: 1.8% - Risk-reward ratio: ~3:1 IMPORTANT DISCLAIMERS: - Past performance does not guarantee future results - Leveraged trading carries substantial risk of loss - Weekend crypto markets have 13% of normal liquidity - Not suitable for traders who cannot afford to lose their entire investment - Requires continuous monitoring and adjustment USAGE: 1. Apply to 15-minute charts only 2. Configure weekend hours for your timezone 3. Set up webhook alerts for automation 4. Monitor performance table in top-right corner 5. Adjust parameters based on your risk tolerance This is an experimental strategy for educational purposes. Always test with small amounts first and never invest more than you can afford to lose completely.
Strategi Pine Script®
oleh YOUNGPSI
XRP Scalping with EMA Crossover Anticipation This script is designed to detect scalping opportunities on XRP by anticipating EMA crossovers, reinforced with technical confirmation filters. Methodology - The core signal is based on the crossover between a fast EMA (9) and a slow EMA (21). - RSI (14) conditions are applied to avoid weak setups: RSI must be above 40 for buy signals and below 70 for sell signals. - Before any crossover is validated, the script requires at least two consecutive “pre-crossover” signals. These indicate favorable momentum and convergence conditions before the crossover occurs. - Final signals are only displayed if this minimum number of preconditions is met. Application This system is optimized for scalping on the 1-minute to 5-minute timeframes but can be adapted for longer-term setups by adjusting parameters. The anticipation logic helps reduce lagging entries and improves signal selectivity during volatile conditions. Both pre-crossover and confirmed crossover conditions include alert options. The code is fully editable and customizable.
Penunjuk Pine Script®
oleh gnatius1975
3
Ultimate Scalping Tool[BullByte]Overview The Ultimate Scalping Tool is an open-source TradingView indicator built for scalpers and short-term traders released under the Mozilla Public License 2.0. It uses a custom Quantum Flux Candle (QFC) oscillator to combine multiple market forces into one visual signal. In plain terms, the script reads momentum, trend strength, volatility, and volume together and plots a special “candlestick” each bar (the QFC) that reflects the overall market bias. This unified view makes it easier to spot entries and exits: the tool labels signals as Strong Buy/Sell, Pullback (a brief retracement in a trend), Early Entry, or Exit Warning . It also provides color-coded alerts and a small dashboard of metrics. In practice, traders see green/red oscillator bars and symbols on the chart when conditions align, helping them scalp or trend-follow without reading multiple separate indicators. Core Components Quantum Flux Candle (QFC) Construction The QFC is the heart of the indicator. Rather than using raw price, it creates a candlestick-like bar from the underlying oscillator values. Each QFC bar has an “open,” “high/low,” and “close” derived from calculated momentum and volatility inputs for that period . In effect, this turns the oscillator into intuitive candle patterns so traders can recognize momentum shifts visually. (For comparison, note that Heikin-Ashi candles “have a smoother look because take an average of the movement”. The QFC instead represents exact oscillator readings, so it reflects true momentum changes without hiding price action.) Colors of QFC bars change dynamically (e.g. green for bullish momentum, red for bearish) to highlight shifts. This is the first open-source QFC oscillator that dynamically weights four non-correlated indicators with moving thresholds, which makes it a unique indicator on its own. Oscillator Normalization & Adaptive Weights The script normalizes its oscillator to a fixed scale (for example, a 0–100 range much like the RSI) so that various inputs can be compared fairly. It then applies adaptive weighting: the relative influence of trend, momentum, volatility or volume signals is automatically adjusted based on current market conditions. For instance, in very volatile markets the script might weight volatility more heavily, or in a strong trend it might give extra weight to trend direction. Normalizing data and adjusting weights helps keep the QFC sensitive but stable (normalization ensures all inputs fit a common scale). Trend/Momentum/Volume/Volatility Fusion Unlike a typical single-factor oscillator, the QFC oscillator fuses four aspects at once. It may compute, for example, a trend indicator (such as an ADX or moving average slope), a momentum measure (like RSI or Rate-of-Change), a volume-based pressure (similar to MFI/OBV), and a volatility measure (like ATR) . These different values are combined into one composite oscillator. This “multi-dimensional” approach follows best practices of using non-correlated indicators (trend, momentum, volume, volatility) for confirmation. By encoding all these signals in one line, a high QFC reading means that trend, momentum, and volume are all aligned, whereas a neutral reading might mean mixed conditions. This gives traders a comprehensive picture of market strength. Signal Classification The script interprets the QFC oscillator to label trades. For example: • Strong Buy/Sell : Triggered when the oscillator crosses a high-confidence threshold (e.g. breaks clearly above zero with strong slope), indicating a well-confirmed move. This is like seeing a big green/red QFC candle aligned with the trend. • Pullbacks : Identified when the trend is up but momentum dips briefly. A Pullback Buy appears if the overall trend is bullish but the oscillator has a short retracement – a typical buying opportunity in an uptrend. (A pullback is “a brief decline or pause in a generally upward price trend”.) • Early Buy/Sell : Marks an initial swing in the oscillator suggesting a possible new trend, before it is fully confirmed. It’s a hint of momentum building (an early-warning signal), not as strong as the confirmed “Strong” signal. • Exit Warnings : Issued when momentum peaks or reverses. For instance, if the QFC bars reach a high and start turning red/green opposite, the indicator warns that the move may be ending. In other words, a Momentum Peak is the point of maximum strength after which weakness may follow. These categories correspond to typical trading concepts: Pullback (temporary reversal in an uptrend), Early Buy (an initial bullish cross), Strong Buy (confirmed bullish momentum), and Momentum Peak (peak oscillator value suggesting exhaustion). Filters (DI Reversal, Dynamic Thresholds, HTF EMA/ADX) Extra filters help avoid bad trades. A DI Reversal filter uses the +DI/–DI lines (from the ADX system) to require that the trend direction confirms the signal . For example, it might ignore a buy signal if the +DI is still below –DI. Dynamic Thresholds adjust signal levels on-the-fly: rather than fixed “overbought” lines, they move with volatility so signals happen under appropriate market stress. An optional High-Timeframe EMA or ADX filter adds a check against a larger timeframe trend: for instance, only taking a trade if price is above the weekly EMA or if weekly ADX shows a strong trend. (Notably, the ADX is “a technical indicator used by traders to determine the strength of a price trend”, so requiring a high-timeframe ADX avoids trading against the bigger trend.) Dashboard Metrics & Color Logic The Dashboard in the Ultimate Scalping Tool (UST) serves as a centralized information hub, providing traders with real-time insights into market conditions, trend strength, momentum, volume pressure, and trade signals. It is highly customizable, allowing users to adjust its appearance and content based on their preferences. 1. Dashboard Layout & Customization Short vs. Extended Mode : Users can toggle between a compact view (9 rows) and an extended view (13 rows) via the `Short Dashboard` input. Text Size Options : The dashboard supports three text sizes— Tiny, Small, and Normal —adjustable via the `Dashboard Text Size` input. Positioning : The dashboard is positioned in the top-right corner by default but can be moved if modified in the script. 2. Key Metrics Displayed The dashboard presents critical trading metrics in a structured table format: Trend (TF) : Indicates the current trend direction (Strong Bullish, Moderate Bullish, Sideways, Moderate Bearish, Strong Bearish) based on normalized trend strength (normTrend) . Momentum (TF) : Displays momentum status (Strong Bullish/Bearish or Neutral) derived from the oscillator's position relative to dynamic thresholds. Volume (CMF) : Shows buying/selling pressure levels (Very High Buying, High Selling, Neutral, etc.) based on the Chaikin Money Flow (CMF) indicator. Basic & Advanced Signals: Basic Signal : Provides simple trade signals (Strong Buy, Strong Sell, Pullback Buy, Pullback Sell, No Trade). Advanced Signal : Offers nuanced signals (Early Buy/Sell, Momentum Peak, Weakening Momentum, etc.) with color-coded alerts. RSI : Displays the Relative Strength Index (RSI) value, colored based on overbought (>70), oversold (<30), or neutral conditions. HTF Filter : Indicates the higher timeframe trend status (Bullish, Bearish, Neutral) when using the Leading HTF Filter. VWAP : Shows the V olume-Weighted Average Price and whether the current price is above (bullish) or below (bearish) it. ADX : Displays the Average Directional Index (ADX) value, with color highlighting whether it is rising (green) or falling (red). Market Mode : Shows the selected market type (Crypto, Stocks, Options, Forex, Custom). Regime : Indicates volatility conditions (High, Low, Moderate) based on the **ATR ratio**. 3. Filters Status Panel A secondary panel displays the status of active filters, helping traders quickly assess which conditions are influencing signals: - DI Reversal Filter: On/Off (confirms reversals before generating signals). - Dynamic Thresholds: On/Off (adjusts buy/sell thresholds based on volatility). - Adaptive Weighting: On/Off (auto-adjusts oscillator weights for trend/momentum/volatility). - Early Signal: On/Off (enables early momentum-based signals). - Leading HTF Filter: On/Off (applies higher timeframe trend confirmation). 4. Visual Enhancements Color-Coded Cells : Each metric is color-coded (green for bullish, red for bearish, gray for neutral) for quick interpretation. Dynamic Background : The dashboard background adapts to market conditions (bullish/bearish/neutral) based on ADX and DI trends. Customizable Reference Lines : Users can enable/disable fixed reference lines for the oscillator. How It(QFC) Differs from Traditional Indicators Quantum Flux Candle (QFC) Versus Heikin-Ashi Heikin-Ashi candles smooth price by averaging (HA’s open/close use averages) so they show trend clearly but hide true price (the current HA bar’s close is not the real price). QFC candles are different: they are oscillator values, not price averages . A Heikin-Ashi chart “has a smoother look because it is essentially taking an average of the movement”, which can cause lag. The QFC instead shows the raw combined momentum each bar, allowing faster recognition of shifts. In short, HA is a smoothed price chart; QFC is a momentum-based chart. Versus Standard Oscillators Common oscillators like RSI or MACD use fixed formulas on price (or price+volume). For example, RSI “compares gains and losses and normalizes this value on a scale from 0 to 100”, reflecting pure price momentum. MFI is similar but adds volume. These indicators each show one dimension: momentum or volume. The Ultimate Scalping Tool’s QFC goes further by integrating trend strength and volatility too. In practice, this means a move that looks strong on RSI might be downplayed by low volume or weak trend in QFC. As one source notes, using multiple non-correlated indicators (trend, momentum, volume, volatility) provides a more complete market picture. The QFC’s multi-factor fusion is unique – it is effectively a multi-dimensional oscillator rather than a traditional single-input one. Signal Style Traditional oscillators often use crossovers (RSI crossing 50) or fixed zones (MACD above zero) for signals. The Ultimate Scalping Tool’s signals are custom-classified: it explicitly labels pullbacks, early entries, and strong moves. These terms go beyond a typical indicator’s generic “buy”/“sell.” In other words, it packages a strategy around the oscillator, which traders can backtest or observe without reading code. Key Term Definitions • Pullback : A short-term dip or consolidation in an uptrend. In this script, a Pullback Buy appears when price is generally rising but shows a brief retracement. (As defined by Investopedia, a pullback is “a brief decline or pause in a generally upward price trend”.) • Early Buy/Sell : An initial or tentative entry signal. It means the oscillator first starts turning positive (or negative) before a full trend has developed. It’s an early indication that a trend might be starting. • Strong Buy/Sell : A confident entry signal when multiple conditions align. This label is used when momentum is already strong and confirmed by trend/volume filters, offering a higher-probability trade. • Momentum Peak : The point where bullish (or bearish) momentum reaches its maximum before weakening. When the oscillator value stops rising (or falling) and begins to reverse, the script flags it as a peak – signaling that the current move could be overextended. What is the Flux MA? The Flux MA (Moving Average) is an Exponential Moving Average (EMA) applied to a normalized oscillator, referred to as FM . Its purpose is to smooth out the fluctuations of the oscillator, providing a clearer picture of the underlying trend direction and strength. Think of it as a dynamic baseline that the oscillator moves above or below, helping you determine whether the market is trending bullish or bearish. How it’s calculated (Flux MA): 1.The oscillator is normalized (scaled to a range, typically between 0 and 1, using a default scale factor of 100.0). 2.An EMA is applied to this normalized value (FM) over a user-defined period (default is 10 periods). 3.The result is rescaled back to the oscillator’s original range for plotting. Why it matters : The Flux MA acts like a support or resistance level for the oscillator, making it easier to spot trend shifts. Color of the Flux Candle The Quantum Flux Candle visualizes the normalized oscillator (FM) as candlesticks, with colors that indicate specific market conditions based on the relationship between the FM and the Flux MA. Here’s what each color means: • Green : The FM is above the Flux MA, signaling bullish momentum. This suggests the market is trending upward. • Red : The FM is below the Flux MA, signaling bearish momentum. This suggests the market is trending downward. • Yellow : Indicates strong buy conditions (e.g., a "Strong Buy" signal combined with a positive trend). This is a high-confidence signal to go long. • Purple : Indicates strong sell conditions (e.g., a "Strong Sell" signal combined with a negative trend). This is a high-confidence signal to go short. The candle mode shows the oscillator’s open, high, low, and close values for each period, similar to price candlesticks, but it’s the color that provides the quick visual cue for trading decisions. How to Trade the Flux MA with Respect to the Candle Trading with the Flux MA and Quantum Flux Candle involves using the MA as a trend indicator and the candle colors as entry and exit signals. Here’s a step-by-step guide: 1. Identify the Trend Direction • Bullish Trend : The Flux Candle is green and positioned above the Flux MA. This indicates upward momentum. • Bearish Trend : The Flux Candle is red and positioned below the Flux MA. This indicates downward momentum. The Flux MA serves as the reference line—candles above it suggest buying pressure, while candles below it suggest selling pressure. 2. Interpret Candle Colors for Trade Signals • Green Candle : General bullish momentum. Consider entering or holding a long position. • Red Candle : General bearish momentum. Consider entering or holding a short position. • Yellow Candle : A strong buy signal. This is an ideal time to enter a long trade. • Purple Candle : A strong sell signal. This is an ideal time to enter a short trade. 3. Enter Trades Based on Crossovers and Colors • Long Entry : Enter a buy position when the Flux Candle turns green and crosses above the Flux MA. If it turns yellow, this is an even stronger signal to go long. • Short Entry : Enter a sell position when the Flux Candle turns red and crosses below the Flux MA. If it turns purple, this is an even stronger signal to go short. 4. Exit Trades • Exit Long : Close your buy position when the Flux Candle turns red or crosses below the Flux MA, indicating the bullish trend may be reversing. • Exit Short : Close your sell position when the Flux Candle turns green or crosses above the Flux MA, indicating the bearish trend may be reversing. •You might also exit a long trade if the candle changes from yellow to green (weakening strong buy signal) or a short trade from purple to red (weakening strong sell signal). 5. Use Additional Confirmation To avoid false signals, combine the Flux MA and candle signals with other indicators or dashboard metrics (e.g., trend strength, momentum, or volume pressure). For example: •A yellow candle with a " Strong Bullish " trend and high buying volume is a robust long signal. •A red candle with a " Moderate Bearish " trend and neutral momentum might need more confirmation before shorting. Practical Example Imagine you’re scalping a cryptocurrency: • Long Trade : The Flux Candle turns yellow and is above the Flux MA, with the dashboard showing "Strong Buy" and high buying volume. You enter a long position. You exit when the candle turns red and dips below the Flux MA. • Short Trade : The Flux Candle turns purple and crosses below the Flux MA, with a "Strong Sell" signal on the dashboard. You enter a short position. You exit when the candle turns green and crosses above the Flux MA. Market Presets and Adaptation This indicator is designed to work on any market with candlestick price data (stocks, crypto, forex, indices, etc.). To handle different behavior, it provides presets for major asset classes. Selecting a “Stocks,” “Crypto,” “Forex,” or “Options” preset automatically loads a set of parameter values optimized for that market . For example, a crypto preset might use a shorter lookback or higher sensitivity to account for crypto’s high volatility, while a stocks preset might use slightly longer smoothing since stocks often trend more slowly. In practice, this means the same core QFC logic applies across markets, but the thresholds and smoothing adjust so signals remain relevant for each asset type. Usage Guidelines • Recommended Timeframes : Optimized for 1 minute to 15 minute intraday charts. Can also be used on higher timeframes for short term swings. • Market Types : Select “Crypto,” “Stocks,” “Forex,” or “Options” to auto tune periods, thresholds and weights. Use “Custom” to manually adjust all inputs. • Interpreting Signals : Always confirm a signal by checking that trend, volume, and VWAP agree on the dashboard. A green “Strong Buy” arrow with green trend, green volume, and price > VWAP is highest probability. • Adjusting Sensitivity : To reduce false signals in fast markets, enable DI Reversal Confirmation and Dynamic Thresholds. For more frequent entries in trending environments, enable Early Entry Trigger. • Risk Management : This tool does not plot stop loss or take profit levels. Users should define their own risk parameters based on support/resistance or volatility bands. Background Shading To give you an at-a-glance sense of market regime without reading numbers, the indicator automatically tints the chart background in three modes—neutral, bullish and bearish—with two levels of intensity (light vs. dark): Neutral (Gray) When ADX is below 20 the market is considered “no trend” or too weak to trade. The background fills with a light gray (high transparency) so you know to sit on your hands. Bullish (Green) As soon as ADX rises above 20 and +DI exceeds –DI, the background turns a semi-transparent green, signaling an emerging uptrend. When ADX climbs above 30 (strong trend), the green becomes more opaque—reminding you that trend-following signals (Strong Buy, Pullback) carry extra weight. Bearish (Red) Similarly, if –DI exceeds +DI with ADX >20, you get a light red tint for a developing downtrend, and a darker, more solid red once ADX surpasses 30. By dynamically varying both hue (green vs. red vs. gray) and opacity (light vs. dark), the background instantly communicates trend strength and direction—so you always know whether to favor breakout-style entries (in a strong trend) or stay flat during choppy, low-ADX conditions. The setup shown in the above chart snapshot is BTCUSD 15 min chart : Binance for reference. Disclaimer No indicator guarantees profits. Backtest or paper trade this tool to understand its behavior in your market. Always use proper position sizing and stop loss orders. Good luck! - BullByte
Penunjuk Pine Script®
oleh BullByte
51
Williams R Zone Scalper v1.0[BullByte]Originality & Usefulness Unlike standard Williams R cross-over scripts, this strategy layers five dynamic filters—moving-average trend, Supertrend, Choppiness Index, Bollinger Band Width, and volume validation —and presents a real-time dashboard with equity, PnL, filter status, and key indicator values. No other public Pine script combines these elements with toggleable filters and a custom dashboard. In backtests (BTC/USD (Binance), 5 min, 24 Mar 2025 → 28 Apr 2025), adding these filters turned a –2.09 % standalone Williams R into a +5.05 % net winner while cutting maximum drawdown in half. --- What This Script Does - Monitors Williams R (length 14) for overbought/oversold reversals. - Applies up to five dynamic filters to confirm trend strength and volatility direction: - Moving average (SMA/EMA/WMA/HMA) - Supertrend line - Choppiness Index (CI) - Bollinger Band Width (BBW) - Volume vs. its 50-period MA - Plots blue arrows for Long entries (R crosses above –80 + all filters green) and red arrows for Short entries (R crosses below –20 + all filters green). - Optionally sets dynamic ATR-based stop-loss (1.5×ATR) and take-profit (2×ATR). - Shows a dashboard box with current position, equity, PnL, filter status, and real-time Williams R / MA/volume values. --- Backtest Summary (BTC/USD(Binance), 5 min, 24 Mar 2025 → 28 Apr 2025) • Total P&L : +50.70 USD (+5.05 %) • Max Drawdown : 31.93 USD (3.11 %) • Total Trades : 198 • Win Rate : 55.05 % (109/89) • Profit Factor : 1.288 • Commission : 0.01 % per trade • Slippage : 0 ticks Even in choppy March–April, this multi-filter approach nets +5 % with a robust risk profile, compared to –2.09 % and higher drawdown for Williams R alone. --- Williams R Alone vs. Multi-Filter Version • Total P&L : – Williams R alone → –20.83 USD (–2.09 %) – Multi-Filter → +50.70 USD (+5.05 %) • Max Drawdown : – Williams R alone → 62.13 USD (6.00 %) – Multi-Filter → 31.93 USD (3.11 %) • Total Trades : 543 vs. 198 • Win Rate : 60.22 % vs. 55.05 % • Profit Factor : 0.943 vs. 1.288 --- Inputs & What They Control - wrLen (14): Williams R look-back - maType (EMA): Trend filter type (SMA, EMA, WMA, HMA) - maLen (20): Moving-average period - useChop (true): Toggle Choppiness Index filter - ciLen (12): CI look-back length - chopThr (38.2): CI threshold (below = trending) - useVol (true): Toggle volume-above-average filter - volMaLen (50): Volume MA period - useBBW (false): Toggle Bollinger Band Width filter - bbwMaLen (50): BBW MA period - useST (false): Toggle Supertrend filter - stAtrLen (10): Supertrend ATR length - stFactor (3.0): Supertrend multiplier - useSL (false): Toggle ATR-based SL/TP - atrLen (14): ATR period for SL/TP - slMult (1.5): SL = slMult × ATR - tpMult (2.0): TP = tpMult × ATR --- How to Read the Chart - Blue arrow (Long): Williams R crosses above –80 + all enabled filters green - Red arrow (Short) : Williams R crosses below –20 + all filters green - Dashboard box: - Top : position and equity - Next : cumulative PnL in USD & % - Middle : green/white dots for each filter (green=passing, white=disabled) - Bottom : Williams R, MA, and volume current values --- Usage Tips - Add the script : Indicators → My Scripts → Williams R Zone Scalper v1.0 → Add to BTC/USD chart on 5 min. - Defaults : Optimized for BTC/USD. - Forex majors : Raise `chopThr` to ~42. - Stocks/high-beta : Enable `useBBW`. - Enable SL/TP : Toggle `useSL`; stop-loss = 1.5×ATR, take-profit = 2×ATR apply automatically. --- Common Questions - * Why not trade every Williams R reversal?* Raw Williams R whipsaws in sideways markets. Choppiness and volume filters reduce false entries. - *Can I use on 1 min or 15 min?* Yes—adjust ATR length or thresholds accordingly. Defaults target 5 min scalping. - *What if all filters are on?* Fewer arrows, higher-quality signals. Expect ~10 % boost in average win size. --- Disclaimer & License Trading carries risk of loss. Use this script “as is” under the Mozilla Public License 2.0 (mozilla.org). Always backtest, paper-trade, and adjust risk settings to your own profile. --- Credits & References - Pine Script v6, using TradingView’s built-in `ta.supertrend()`. - TradingView House Rules: www.tradingview.com Goodluck! BullByte
Strategi Pine Script®
oleh BullByte
TrendSync Pro (SMC)📊 TrendSync Pro (SMC) – Advanced Trend-Following Strategy with HTF Alignment Created by Shubham Singh 🔍 Strategy Overview TrendSync Pro (SMC) is a precision-based smart trend-following strategy inspired by Smart Money Concepts (SMC). It combines: Real-time pivot-based trendline detection Higher Time Frame (HTF) filtering to align trades with dominant trend Risk management via adjustable Stop Loss (SL) and Take Profit (TP) Directional control — trade only bullish, bearish, or both setups Realistic backtesting using commissions and slippage Pre-optimized profiles for scalpers, intraday, swing, and long-term traders 🧠 How It Works: 🔧 Strategy Settings Image: beeimg.com The strategy dynamically identifies trend direction by using swing high/low pivots. When a new pivot forms: It draws a trendline from the last significant pivot Detects whether the trend is up (based on pivot lows) or down (based on pivot highs) Waits for price to break above/below the trendline Confirms with HTF price direction (HTF close > previous HTF close = bullish) Only then it triggers a long or short trade It exits either at TP, SL, or a manual trendline break 🛠️ Adjustable Parameters: Trend Period: Length for pivot detection (affects sensitivity of trendlines) HTF Timeframe: Aligns lower timeframe entries with higher timeframe direction SL% and TP%: Customize your risk-reward profile Commission & Slippage: Make backtests more realistic Trade Direction: Choose to trade: Long only, Short only, or Both 🎛️ Trade Direction Control: In settings, you can choose: Bullish Only: Executes only long entries Bearish Only: Executes only short entries Both: Executes both long and short entries when conditions are met This allows you to align trades with your own market bias or external analysis. 📈 Entry Logic: Long Entry:  • Price crosses above trendline  • HTF is bullish (HTF close > previous close)  • Latest pivot is a low (trend is considered up) Short Entry:  • Price crosses below trendline  • HTF is bearish (HTF close < previous close)  • Latest pivot is a high (trend is considered down) 📉 Exit Logic: Hit Take Profit or Stop Loss Manual trendline invalidation: If price crosses opposite of the trend direction ⏰ Best Timeframes & Recommended Settings: Scalping (1m to 5m):  HTF = 15m | Trend Period = 7  SL = 0.5% | TP = 1% to 2% Intraday (15m to 30m):  HTF = 1H | Trend Period = 10–14  SL = 0.75% | TP = 2% to 3% 6 Hour Trading (30m to 1H):  HTF = 4H | Trend Period = 20  SL = 1% | TP = 4% to 6% Swing Trading (4H to 1D):  HTF = 1D | Trend Period = 35  SL = 2% | TP = 8% to 12% Long-Term Investing (1D+):  HTF = 1W | Trend Period = 50  SL = 3% | TP = 15%+ Note: These are recommended base settings. Adjust based on volatility, asset class, or personal trading style. 📸 Testing Note: beeimg.com TradingView limits test length to 20k bars (~40 trades on smaller timeframes). To show long-term results: Test on higher timeframes (e.g., 1H, 4H, 1D) Share images of backtest result in description Host longer test result screenshots on Imgur or any public drive 📍 Asset Behavior Insight: This strategy works on multiple assets, including BTC, ETH, etc. Performance varies by trend strength: Sometimes BTC performs better than ETH Other times ETH gives better results That’s normal as both assets follow different volatility and trend behavior It’s a trend-following setup. Longer and clearer the trend → better the results. ✅ Best Practices: Avoid ranging markets Use proper SL/TP for each timeframe Use directional filter if you already have a directional bias Always forward test before going live ⚠️ Trading Disclaimer: This script is for educational and backtesting purposes only. Trading involves risk. Always use risk management and never invest more than you can afford to lose.
Strategi Pine Script®
oleh shubham_singh_1927
Smart Grid Scalping (Pullback) Strategy[BullByte]The Smart Grid Scalping (Pullback) Strategy is a high-frequency trading strategy designed for short-term traders who seek to capitalize on market pullbacks. This strategy utilizes a dynamic ATR-based grid system to define optimal entry points, ensuring precise trade execution. It integrates volatility filtering and an RSI-based confirmation mechanism to enhance signal accuracy and reduce false entries. This strategy is specifically optimized for scalping by dynamically adjusting trade levels based on current market conditions. The grid-based system helps capture retracement opportunities while maintaining strict trade management through predefined profit targets and trailing stop-loss mechanisms. Key Features : 1. ATR-Based Grid System : - Uses a 10-period ATR to dynamically calculate grid levels for entry points. - Prevents chasing trades by ensuring price has reached key levels before executing entries. 2. No Trade Zone Protection : - Avoids low-volatility zones where price action is indecisive. - Ensures only high-momentum trades are executed to improve success rate. 3. RSI-Based Entry Confirmation : - Long trades are triggered when RSI is below 30 (oversold) and price is in the lower grid zone. - Short trades are triggered when RSI is above 70 (overbought) and price is in the upper grid zone. 4. Automated Trade Execution : - Long Entry: Triggered when price drops below the first grid level with sufficient volatility. - Short Entry: Triggered when price exceeds the highest grid level with sufficient volatility. 5. Take Profit & Trailing Stop : - Profit target set at a customizable percentage (default 0.2%). - Adaptive trailing stop mechanism using ATR to lock in profits while minimizing premature exits. 6. Visual Trade Annotations : - Clearly labeled "LONG" and "SHORT" markers appear at trade entries for better visualization. - Grid levels are plotted dynamically to aid decision-making. Strategy Logic : - The script first calculates the ATR-based grid levels and ensures price action has sufficient volatility before allowing trades. - An additional RSI filter is used to ensure trades are taken at ideal market conditions. - Once a trade is executed, the script implements a trailing stop and predefined take profit to maximize gains while reducing risks. --- Disclaimer : Risk Warning : This strategy is provided for educational and informational purposes only. Trading involves significant risk, and past performance is not indicative of future results. Users are advised to conduct their own due diligence and risk management before using this strategy in live trading. The developer and publisher of this script are not responsible for any financial losses incurred by the use of this strategy. Market conditions, slippage, and execution quality can affect real-world trading outcomes. Use this script at your own discretion and always trade responsibly.
Strategi Pine Script®
oleh BullByte
2
Pro Scalper AI [BullByte]The Pro Scalper AI is a powerful, multi-faceted scalping indicator designed to assist active traders in identifying short-term trading opportunities with precision. By combining trend analysis, momentum indicators, dynamic weighting, and optional AI forecasting, this tool provides both immediate and latched trading signals based on confirmed (closed bar) data—helping to avoid repainting issues. Its flexible design includes customizable filters such as a higher timeframe trend filter, and adjustable settings for ADX, ATR, and Hull Moving Average (HMA), giving traders the ability to fine-tune the strategy to different markets and timeframes. Key Features : - Confirmed Data Processing : Utilizes a helper function to lock in price and volume data only from confirmed (closed) bars, ensuring the reliability of signals without the risk of intrabar repainting. - Trend Analysis : Employs ADX and Directional Movement (DI) calculations along with a locally computed HMA to detect short-term trends. An optional higher timeframe trend filter can further refine the analysis. - Flexible Momentum Modes : Choose between three momentum calculation methods—Stochastic RSI, Fisher RSI, or Williams %R—to match your preferred style of analysis. This versatility allows you to optimize the indicator for different market conditions. - Dynamic Weighting & Volatility Adjustments : Adjusts the contribution of trend, momentum, volatility, and volume through dynamic weighting. This ensures that the indicator responds appropriately to varying market conditions by scaling its sensitivity with user-defined maximum factors. - Optional AI Forecast : For those who want an extra edge, the built-in AI forecasting module uses linear regression to predict future price moves and adjusts oscillator thresholds accordingly. This feature can be toggled on or off, with smoothing options available for more stable output. - Latching Mode for Signal Persistenc e: The script features a latching mechanism that holds signals until a clear reversal is detected, preventing whipsaws and providing more reliable trade entries and exits. - Comprehensive Visualizations & Dashboard : - Composite Oscillator & Dynamic Thresholds : The oscillator is plotted with dynamic upper and lower thresholds, and the area between them is filled with a color that reflects the active trading signal (e.g., Strong Buy, Early Sell). - Signal Markers : Both immediate (non-latching) and stored (latched) signals are marked on the chart with distinct shapes (circles, crosses, triangles, and diamonds) to differentiate between signal types. - Real-Time Dashboard : A customizable dashboard table displays key metrics including ADX, oscillator value, chosen momentum mode, HMA trend, higher timeframe trend, volume factor, AI bias (if enabled), and more, allowing traders to quickly assess market conditions at a glance. How to Use : 1. S ignal Interpretation : - Immediate Signals : For traders who prefer quick entries, the indicator displays immediate signals such as “Strong Buy” or “Early Sell” based on the current market snapshot. - Latched Signals : When latching is enabled, the indicator holds a signal state until a clear reversal is confirmed, offering sustained trade setups. 2. Trend Confirmation : - Use the HMA trend indicator and the optional higher timeframe trend filter to confirm the prevailing market direction before acting on signals. 3. Dynamic Thresholds & AI Forecasting : - Monitor the dynamically adjusted oscillator thresholds and, if enabled, the AI bias to gauge potential shifts in market momentum. 4. Risk Management : - Combine these signals with additional analysis and sound risk management practices to determine optimal entry and exit points for scalping trades. Disclaimer : This script is provided for educational and informational purposes only and does not constitute financial advice. Trading involves risk, and past performance is not indicative of future results. Always perform your own analysis and use proper risk management strategies before trading.
Penunjuk Pine Script®
oleh BullByte
38
BB_MDL_V1Simple indicator that is based on the average line of the bollinger bands and the exponential average of 200 periods. The customizable variable is bollinger bands length, currently the default is 35, you can tweak it to your liking and see how trend identification changes. My recommendation is to work in 5-minute time frames in values ​​such as SOL, FTM or MASK (cryptos) This simple strategy can be combined with many others to gain more insight and get better market entries and exits.
Penunjuk Pine Script®
oleh pernath
2
Bollinger Bands Scalper + VWAPGet more consistent scalps by trading in-between Bollinger Band Deviations. FEATURES: 1) 3 Bollinger Bands with default settings to 1, 2, and 3 deviations for more consistent scalps 2) Trendicator: a dynamic color changing moving average that helps you see trend quickly 3) Robust VWAP tool with up to 3 different deviations as well as different anchor points to help you see strong support and resistances 4) Calming "purple cloud" color palette helps you focus on price action 5) Discover new trading strategies with a wide range of customizability
Penunjuk Pine Script®
oleh primalstef
14
Bitcoin Scalping Strategy (Sampled with: PMARP+MADRID MA RIBBON) DISCLAIMER: THE CONTENT WITHIN THIS STRATEGY IS CREATED FROM TWO INDICATORS CREATED BY TWO PINESCRIPTER'S. THE STRATEGY WAS EXECUTED BY MYSELF AND REVERSE-ENGINEERED TO MEET THE CONDITIONS OF THE INTENDED STRATEGY REQUESTOR. I DO NOT TAKE CREDIT FOR THE CONTENT WITHIN THE ESTABLISHED LINES MADE CLEAR BY MYSELF. The Sampled Scripts and creators: PMAR/PMARP by @The_Caretaker Link to original script: Madrid MA RIBBON BAR by @Madrid Link to original script: Cheat Code's strategy notes: This sampled strategy (Requested by @elemy_eth) is one combining previously created studies. I reverse-engineered the local scope for the Madrid moving average color plots and set entry and exit conditions for certain criteria met. This strategy is meant to deliver an extremely high hit rate on a daily time frame. This is made possible because of the very low take profit percentage, during the context of a macro downtrend it is made easier to hit 1-3% scalps which is made visible with the strategy using sampled scripts I created here. How it works: Entry Conditions: -Enter Long's if the lime color conditions are met true using the script detailed by Marid's MA - No re-entry into positions needs to be met true (this prevents pyramiding of orders due to conditions being met true) applicable to both long and short side entries. - To increase hit rate and prevent traps both the parameters of rsi being sub 80 and no previously engulfing candles need to be met true to enter a long position. - Enter Short's if the red color conditions of Madrid's moving average are met true. - Closing Long positions are typically not met within this indicator, however, it still sometimes triggers if necessary. This consists of a pmarp sub 99 and a position size greater than 0.0 - Closing Short positions are typically not met within this indicator, however, it still sometimes triggers if necessary. This consists of a pmarp over 01 and a position size less than 0.0 - Stop Loss: 27.75% Take Profit: 1% (Which does not trigger on ticks over 1% so you will see average trade profits greater than 1%) BYBIT:BTCUSDT BINANCE:BTCUSDT COINBASE:BTCUSD Best Of Luck :) -CheatCode1
Strategi Pine Script®
oleh CheatCode1
15
Joel on Crypto - MACD ScalpingJoel on Crypto - MACD Scalping This is a Scalping indicator primarily intended for the 5 minute time frame. It is based on the Crypto Scalping YouTuber Joel on Crypto's popular 5 minute scalping strategy and this is the indicator he personally use when Scalping. This is a Multi-timeframe indicator where if you use it on the 5 minute time frame, the MACD Histogram bars will be based on the 1 minute timeframe. The purpose of this indicator is not to trade it like a bot. The purpose is to grab the traders attention a time where there COULD be a scalping opportunity. Use this indicator at your own risk.
Penunjuk Pine Script®
oleh scalpingcryptotrading
24
Maximized Scalping On Trend (by Coinrule)" The trend is your friend. " This is one of the most famous and valuable teachings that experienced traders can give to newbies. There is a reason for that. No matter your views about where the price moves, what matters is where the price heads to . The market is always right, and ultimately it decides who gets the profit and who has to take a loss. The purpose of this strategy is to spot when it's the most suitable time to buy an asset profiting from a potential short-term price increase. The strategy tends to open trades frequently, closing them on average in one and a half days. ENTRY The buy order is placed on assets that present strong momentum when it's more likely that it is about to increase further in the short term. To capture momentum on the asset, the rule strategy requires: the MA50 greater than the MA100 the RSI greater than 50 The rule, then, places the order when The price crosses above the MA9. EXIT This strategy comes with a stop loss and a take profit which adapt dynamically to market conditions. The trade is closed in profit when the RSI is greater than 70 , as the trend could experience a pull-back. Alternatively, the trade is closed when the RSI is lower than 30 , being this a sign of weakening of the trend. Pro tip : The 1-hour time frame has proven to return the best results on average. The strategy can also work well in the 15-min time frame if you want to increase the trades' frequency. The strategy assumes each order to trade 30% of the available capital and opens a trade at a time. A trading fee of 0.1% is taken into account.
Strategi Pine Script®
oleh Coinrule
13
CCI Stochastic and a quick lesson on Scalping & Trading SystemsHello traders Still on holidays but I don't and will never forget you <3 I realize more and more that you guys don't only want some indicators and learn about pinescript. You also want some guidance and get some mentors providing you with comprehensive and simple trading methods and tricks. I'm against those posting many scripts a day that in the end will make you lose your money because they don't give you the methodology to use them It might look nice on the charts but we're not here to do some painting.... but to improve our lifestyle right :) The today indicator is based on an indicator that I used for scalping : Fxcodebase CCI Stochastic A CCI stochastic is very reactive and allows us to take many scalps trades per day with a few pips/USD gain for each trade. I don't recommend novice traders to use it and I strongly recommend everyone reading my disclaimer below basically saying "I'm not a financial advisor, don't be dumb, stay safe" (I also recommend the few scripts copy-pasters to read my disclaimer as well) What's a novice trader, sir? Well... thanks for asking. A novice trader is any trader with less than 5 years of live trading experience From a pinescript perspective, this script will be however interesting for everyone :) How to use it? The indicator gives 3 possible entries for Longs and Shorts: - Arrows at Enter - Will give signals whenever the Stoch CCI will enter in the BUY/SELL zone - Arrows at Exit - Will give signals whenever the Stoch CCI will exit the BUY/SELL zone - Arrows at Center - Signals whenever the Stoch CCI will cross the mid-line (50) All arrows have different colors because ... painting is cool and nice.... kidding.... it gives clearer and more readable signals on the chart (but painting sir...) A possible trading method could be to use the 3 modes at the same time to get the maximum of opportunities. The safer bet is to use the "Arrows at Exit" only mode but for those who want to accumulate more scalping positions, adding the "Arrows at Enter" mode is an option as well. In other words, you accumulate a few scalping positions whenever the Stoch CCI get in the BUY/SELL zone and will stop accumulating whenever it will exit the BUY/SELL zone You can add a few extra positions whenever the Stoch CCI will cross the mid-line as it often translates in a trend continuation Life hack Very important note : (probably the most important gem I shared until now) The inputs set by default will have to be changed for your asset/timeframe and can't be generic for everything. You have to play with the inputs until the signals will make sense to you The indicator/strategy with a unique configuration that you'll never check or update according to the market condition DOES NOT exit. If you find such a tool and prove me that you're making constant gains with it over a year, please patent it and then show it to me as I'd like to study it to replicate :) But most likely this is a myth/unicorn Who I am to say this? Well, I worked in a Bank with real traders and I have a good sense of what works and what will certainly not work My guru said scalping crypto in 1 second timeframe was the way to get rich quick. Do you agree sir? But in trading, this is not because you take the maximum of trades possible that your gains will increase. This is the contrary. There is a strong and proven inverse correlation between the number of trades taken and how fast you'll burn your capital. A swing trader taking 2/3 trades a month is more likely to beat 99% of the scalpers out there trying to predict all market movements. (and I'm not even talking about how dangerous it is to scalp with leverage) You're starting to know me a bit more right now. I prefer to tell you what you need to hear vs what you want to hear because the second option doesn't allow to stay in the game very long. I might lose some futures clients along the way by saying that but for my own conscience and ethics, I prefer to warn about the true risks of trading and to select who you listen very carefully (the advice also works for me, if you feel what I said doesn't make sense, this is totally your right but I hope this is because I'm french and not because of the content ^^). See you tomorrow for another indicator or idea Love you all Dave ____________________________________________________________ Be sure to hit the thumbs up. Building those indicators take a lot of time and likes are always rewarding for me :) (tips are accepted too) - If you want to suggest some indicators that I can develop and share with the community, please use my personal TRELLO board - I'm an officially approved PineEditor/LUA/MT4 approved mentor on codementor. You can request a coaching with me if you want and I'll teach you how to build kick-ass indicators and strategies Jump on a 1 to 1 coaching with me - You can also hire for a custom dev of your indicator/strategy/bot/chrome extension/python Disclaimer: Trading involves a high level of financial risk, and may not be appropriate because you may experience losses greater than your deposit. Leverage can be against you. Do not trade with capital that you can not afford to lose. You must be aware and have a complete understanding of all the risks associated with the market and trading. We can not be held responsible for any loss you incur. Trading also involves risks of gambling addiction. Please notice I do not provide financial advice - my indicators, strategies, educational ideas are intended to provide only some source code for anyone interested in improving their trading The proprietary indicators and strategies developed by Best Trading Indicator, the object of intellectual property rights are and remain the exclusive property of Best Trading Indicator, at the exclusion of images and videos and texts free of rights or provided by the Company or external legal or physical person. No assignment of intellectual property rights is carried out through these Terms and Conditions. Any total or partial reproduction, modification or use of these properties for any reason whatsoever is strictly prohibited without the express written authorization of the Company.
Penunjuk Pine Script®
oleh Daveatt
42