Candle Close CounterThis indicator counts how many candles have closed above, below, or exactly at a user-defined price level
starting from a specified time. It provides real-time statistics to help traders analyze price behavior
around key levels.
HOW IT WORKS:
The indicator begins counting at your chosen start time and tracks each candle's closing price relative
to your specified price level. It maintains running totals of candles that close above, below, and at
the price level, displaying this information both in a chart label and a statistics table.
PRACTICAL APPLICATIONS:
1. CONSOLIDATION ANALYSIS:
Use this tool to identify and measure consolidation patterns by placing the price level at the midpoint
of a trading range. A balanced count of candles closing above and below the midpoint suggests genuine
consolidation with no directional bias.
2. RANGE MIDPOINT MONITORING:
During consolidation phases, set the price level to the 50% retracement of the range midpoint between
the high and low. Monitor how price interacts with this level over time.
3. SUPPORT/RESISTANCE VALIDATION:
Place the price level at a key support or resistance zone and start counting from a significant market
event (news release, session open, etc.). The distribution of closes helps validate whether the level
is holding or weakening.
4. SESSION ANALYSIS:
Set the start time to the beginning of a trading session (e.g., 9:30 AM ET for regular hours) and place
the level at the opening price or previous day's close.
Corak carta
Uptrick: Price Memory Trend StrategyHere are clear, structured notes explaining the Pine Script code — the simplified "LSTM-like" trend predictor you were given earlier.
Overall Purpose of the Script
The script tries to imitate LSTM memory behavior (long-term memory + selective forgetting/updating) using only Pine Script's basic math and variables — because real LSTM neural networks (with matrices, multiple gates, backpropagation) are not possible in Pine.
It creates a persistent memory line that:
slowly forgets old information,
selectively accepts new price information,
tries to act as a trend-following / regime-detecting centerline.
Then it uses momentum of this memory line + deviation size to decide whether the market is in an uptrend or downtrend.
Key Sections Explained
1. Inputs (tunable parameters)
pinescriptmemoryStrength = input.float(0.14, "Forget Gate strength (like 1-f)", step=0.01, minval=0.01, maxval=0.99)
inputGate = input.float(0.22, "Input Gate strength", step=0.01, minval=0.01, maxval=1.0)
cellDecay = input.float(0.965, "Cell state decay", step=0.001, minval=0.8, maxval=0.999)
lookback = input.int(21, "Lookback for momentum", minval=5)
sensitivity = input.float(1.35, "Trend sensitivity multiplier", step=0.05)
ParameterWhat it controlsTypical effectHigher value means…memoryStrengthHow aggressively old memory is forgottenControls "forget gate" strengthForgets faster, more responsiveinputGateHow much new price is allowed into memoryControls how much price influences cellMemory follows price more closelycellDecayNatural fading of long-term memory per barPrevents memory from living foreverLower = memory fades fasterlookbackPeriod for momentum and deviation calculationSmoothness of trend detectionLonger = smoother, fewer signalssensitivityHow strong momentum must be to flip trendFinal trigger strictnessHigher = fewer but stronger signals
2. Memory Variables (the "LSTM core")
pinescriptvar float cell = na // long-term memory ≈ cell state C
var float hidden = na // short-term state ≈ hidden state h
if bar_index == 0
cell := price
hidden := price
cell → tries to act like LSTM cell state (long memory)
hidden → tries to act like LSTM hidden state (what we actually observe/use)
3. Simplified Gates
pinescriptforget = math.tanh(hidden * memoryStrength)
i_gate = math.tanh(price * inputGate)
candidate = price - hidden
forget — value between -1 and +1, but we treat higher positive = forget more
i_gate — how much new info we want to accept
candidate — the new information we could add (difference from current hidden)
Very crude approximation — real LSTM uses sigmoid + learned weights.
4. Core LSTM-like Update Rule
pinescriptcell := cell * (1 - forget) + candidate * i_gate
cell := cell * cellDecay
hidden := cell * 0.65 + price * 0.35
This is the heart of the "fake LSTM":
Keep (1 – forget) of old cell
Add a portion (i_gate) of the candidate change
Apply slow exponential decay (cellDecay < 1)
Hidden state = mix between long memory and current price
→ base = hidden becomes our smoothed, memory-aware centerline.
5. Trend Detection Logic
pinescriptmom = ta.change(base, lookback) // how much did memory move in last N bars?
dev = math.abs(price - base) // how far is price from memory center?
avgDev = ta.ema(dev, lookback * 2) // smoothed deviation size
trendScore = (mom / avgDev) * sensitivity // normalized momentum × sensitivity
Normalizes momentum by current volatility/deviation
High positive → strong upward memory movement → likely uptrend
High negative → strong downward memory movement → likely downtrend
6. Trend State Machine (non-repainting flip)
pinescriptvar int trend = 0 // 1 = Up, -1 = Down, 0 = Neutral
bullCondition = trendScore > 1.0 and trendScore <= 1.0
bearCondition = trendScore < -1.0 and trendScore >= -1.0
if bullCondition
trend := 1
else if bearCondition
trend := -1
else
trend := nz(trend )
Only changes trend when crossing the threshold from the other side
Prevents flickering / frequent flipping
Persistent until strong opposite signal appears
7. Visualization Summary
Background tint (light green/red)
Thick memory line (changes color with trend)
Dashed ±1.6× deviation bands
Big up/down labels on trend flips
Alert conditions on every new trend direction
Quick Tuning Guide
GoalSuggestionFewer but stronger signals↑ sensitivity (1.6–2.2), ↑ lookback (30–60)More responsive / earlier entries↑ inputGate, ↓ cellDecay, ↓ memoryStrengthSmoother memory line↓ inputGate, ↑ cellDecay (0.98+)Better in choppy markets↑ lookback, ↑ sensitivityBetter in trending markets↓ lookback, moderate sensitivity (~1.2–1.5)
Most Important Takeaway
This is not a real LSTM — it's a hand-crafted, analog-style memory filter inspired by LSTM ideas.
It tries to combine:
slow-adapting memory (like EMA but with forgetting control)
selective update depending on current deviation
momentum-of-memory as trend strength
Many traders find this kind of memory line more "intelligent" than simple moving averages when tuning the forget/input/decay parameters to match the market personality.
London Breakout Optimized PFBest Practices:
Only take trades in trend and above/below VWAP
Avoid trading in low-volume or sideways markets
Use it for intraday 5-min charts (15-min for trend confirmation)
Track trades in a Trading Journal → improves discipline
Entry Rules:
Long (Buy):
Price above EMA21 & VWAP → bullish trend
EMA slope positive → strong trend confirmation
Pullback to entry zone OR breakout above resistance
Volume above 1.3× average → avoids weak moves
Short (Sell):
Price below EMA21 & VWAP → bearish trend
EMA slope negative → strong downtrend
Pullback to entry zone OR breakout below support
Volume above 1.3× average
Exit Rules:
Stop-Loss: ATR-based, dynamic (tight for fewer losses)
Take Profit: Risk × 3 (3:1 R:R)
Automatically handled by the strategy (strategy.exit)
N Option Selling 2
---
## 📌 Script Description
**NIFTY Weekly Option Seller – Regime-Based Risk-Controlled System**
This indicator is designed for **systematic weekly option selling on NIFTY**, using a **rule-based regime and scoring framework** to decide **what to sell, how aggressively to sell, and when to defend or harvest**.
The script does **not generate buy/sell signals**.
Instead, it acts as a **decision and risk-management engine** for option sellers.
---
## 🔹 Core Idea
The market is always in one of three regimes:
1. **Iron Condor (IC)** → Range / mean-reverting market
2. **Put Credit Spread (PCS)** → Bullish trending market
3. **Call Credit Spread (CCS)** → Bearish trending market
This script **scores all three regimes (0–5)** on the current chart timeframe and automatically selects the **dominant regime**.
---
## 🔹 How Scoring Works (High Level)
Each regime score is built using **price structure + volatility + momentum context**:
### PCS (Bullish bias)
* EMA alignment (8 > 13 > 34)
* ADX trend strength
* Price above VWAP
* CPR breakout
* RSI sanity checks (size is reduced in extremes)
* Daily trend confirmation
### CCS (Bearish bias)
* EMA alignment (8 < 13 < 34)
* ADX trend strength
* Price below VWAP
* CPR breakdown
* RSI sanity checks (size is reduced in extremes)
* Daily trend confirmation
### IC (Range bias)
* Low ADX (both intraday & daily)
* Price inside CPR
* Price near VWAP
* Price inside Camarilla H3–L3
* RSI near equilibrium (45–55)
A **cross-penalty system** ensures that strong trends suppress IC scores and vice-versa, preventing conflicting signals.
Scores are **smoothed** to reduce noise and avoid over-trading.
---
## 🔹 Regime Selection Logic
* The regime with the **highest score** is selected.
* If scores tie:
* **Trending markets → PCS / CCS**
* **Non-trending markets → IC**
This ensures **trend takes priority over range** when volatility expands.
---
## 🔹 Strike Selection (ATR-Based)
The script suggests **volatility-adjusted strike distances** using ATR:
* **Iron Condor:** ±1.0 × ATR
* **PCS / CCS:** ±1.25 × ATR
This adapts automatically to changing volatility instead of using fixed point distances.
---
## 🔹 Risk-First Trade Management
The script provides **three actionable alerts only**:
### 🔴 DEFEND
Triggered when:
* Price approaches short strike
* Trend breaks beyond Camarilla levels
* Volatility expansion threatens the position
→ Signals the need to **roll, widen, or convert**
### 🟢 HARVEST
Triggered when:
* Adequate price cushion exists
* Market remains range-bound or stable
→ Signals opportunity to **book profits or roll closer**
### 🔵 REGIME CHANGE
Triggered when:
* Market structure flips decisively
→ Signals need to **switch strategy bias**
A **cooldown system** prevents alert spam.
---
## 🔹 Position Sizing Philosophy
* Scores determine **directional conviction**
* RSI-based **size multiplier** automatically reduces exposure in extreme momentum conditions
* Optional **minimum lot floor** ensures participation without over-risking
* Designed to support **Risk:Reward frameworks (1:2 or 1:3)** through premium-based stop discipline
---
## 🔹 Visual & UX Features
* Background color reflects active regime and conviction
* On-chart panel displays:
* Active strategy
* Scores (IC / PCS / CCS)
* ADX & RSI
* VWAP, CPR, Camarilla levels
* Clean, non-repainting levels (previous day data)
---
## 🔹 Intended Use
* Weekly option selling (IC / PCS / CCS)
* Works best on **30m–1h charts**
* Designed for **rule-based traders**, not discretionary scalpers
* Focused on **capital preservation, consistency, and disciplined adjustments**
---
## ⚠️ Disclaimer
This script is **not financial advice**.
It is a **decision-support and risk-management tool** for experienced option sellers who already understand spreads, adjustments, and margin dynamics.
ICT: Silver Box Reversion DOOLMEDIA🧪 STRATEGY STATEMENT – “ ”
Author: | Published: 2026-01-24 | Version: 1.0
Universe & Instruments
• BTCUSDT, ETHUSDT, SOLUSDT, XAUUSD (spot or perpetual).
• 15 min chart as master; 5 min for fine entry.
Core Logic
• Hybrid mean-reversion + micro-momentum.
• Long only when 15 min RSI(14) ≤ 35 AND 5 min RSI(6) crosses above 45.
• Short only when 15 min RSI ≥ 70 AND 5 min RSI crosses below 55.
• Gold filter: only trade long if 10-period correlation with DXY < –0.25.
Risk & Money Management
• Fixed 0.5 % equity risk per trade (ATR-based stop).
• Max 8 concurrent positions; 25 % capital per symbol.
• Hard portfolio stop: –5 % daily / –10 % weekly equity draw-down → flat all.
Targets & Exits
• TP = 1.5 R (risk-multiple) OR opposing RSI level.
• SL = 1.0 ATR(14) below/above entry candle low/high.
• Weekend flat for crypto; gold positions carry with 0.25 % gap insurance.
Back-test Highlights (2019-01-01 → 2026-01-20)
• Net return +4 215 USDT (+422 %) on 100 USDT start.
• Max equity draw-down 5.02 %.
• 1 433 trades, 92.11 % winners, Profit-Factor 2.59.
• Average winner +0.93 %, average loser –0.44 %.
Assumptions & Disclaimers
• 0.05 % round-trip commission, 0.5 point spread on XAUUSD.
• No re-quote or slippage modeled – live results may underperform.
• Hypothetical performance; not investment advice. Trade at your own risk.
How to Use
• Add strategy to your chart, set “Order size” = 10 % equity, pyramiding = 8.
• Alerts are pre-coded: “LongEntry”, “ShortEntry”, “ExitAll”.
• For auto-trading connect via webhook to API; use sub-account with ≤10 % of total capital.
Changelog
v1.0 – initial release.
Universal Auto CPR + R1-R5 S1-S5 +Smoothed Heikin AshiWhat this script is doing :
✅ Part A: Smoothed Heikin Ashi candles (visual overlay)
It calculates Heikin Ashi OHLC
Then applies EMA smoothing to HA values (shaLen)
Finally plots the HA candles using plotcandle()
👉 Important: This HA overlay is ONLY for view.
It does not change CPR / pivot levels,
✅ Part B : Auto CPR timeframe selection
It automatically decides which higher timeframe to use for CPR based on chart timeframe:
Rule inside autoTF:
Chart timeframe CPR timeframe used
seconds or minutes < 60 Daily (D)
minutes ≥ 60 Weekly (W)
daily Monthly (M)
weekly/monthly Yearly (12M)
✅ Recommendation : Add colors + widths to make CPR readable
Currently all plots are default color.
You can set:
Pivot as yellow
TC/BC as blue
R levels red
S levels green
Midlines faded
(only visual improvement)
Happy trading
Teemo Support and Demand ZoneTeemo Support and Demand Zone
Description:
The Teemo Support and Demand Zone indicator is a powerful tool designed to automatically identify and visualize key market structure levels. By detecting significant swing highs and lows, it draws Supply (resistance) and Demand (support) zones on your chart, helping traders spot potential reversal or continuation areas with precision.
This indicator is part of the Teemo™ Trading Systems suite, featuring a clean, professional visual style and robust logic optimized for real-time trading.
Key Features:
Automated Zone Detection: Automatically plots Supply and Demand zones based on customizable swing lengths.
Dynamic Zone Extension: Active zones extend to the current time, ensuring you always see relevant levels.
BOS (Break of Structure) Tracking: When a zone is broken by price action, it is visually marked as a "Break of Structure," helping you track market momentum changes.
ZigZag Visualization (Optional): Overlay ZigZag lines to clearly see market waves and trends.
Market Structure Labels (Optional): Displays HH (Higher High), LH (Lower High), HL (Higher Low), and LL (Lower Low) labels for detailed price action analysis.
Teemo Color System: Uses a standardized, professional color palette (Teemo Mint for Demand, Teemo Purple for Supply) for a consistent and clean look.
Optimized Performance: Built with Pine Script v6, utilizing efficient array management and drawing limits for smooth performance on all timeframes.
How to Use:
Supply Zones (Purple): These areas represent potential resistance where selling pressure may increase. Look for bearish reversal signals or price rejection when the price enters these zones.
Demand Zones (Mint): These areas represent potential support where buying interest may rise. Look for bullish reversal setups or bounces when the price approaches these zones.
Break of Structure: When a zone is invalidated (broken), it indicates a potential shift in trend or momentum. The indicator will automatically update the zone to reflect this break.
Customization: Adjust the "Swing Length" to tune the sensitivity of zone detection. Increase "Zone Width Factor" to adjust the vertical size of the zones based on ATR.
Settings:
Swing Length: Determines the lookback period for identifying pivot points (default: 10).
Max History Zones: Sets the maximum number of past zones to keep on the chart (default: 20).
Zone Width Factor: Multiplier for ATR to calculate the height of the zones (default: 2.5).
Visual Styles: Toggle ZigZag lines and HH/LL labels on or off according to your preference.
Teemo Support and Demand Zone
설명:
Teemo Support and Demand Zone 지표는 시장의 주요 구조적 레벨을 자동으로 식별하고 시각화해 주는 강력한 도구입니다. 의미 있는 스윙 고점과 저점을 감지하여 차트에 공급(저항) 구간과 수요(지지) 구간을 그려줌으로써, 트레이더가 잠재적인 반전이나 추세 지속 지점을 정확하게 포착할 수 있도록 돕습니다.
이 지표는 Teemo™ Trading Systems 제품군의 일부로, 깔끔하고 전문적인 시각 스타일과 실전 트레이딩에 최적화된 견고한 로직을 자랑합니다.
주요 기능:
자동 구간 감지: 설정 가능한 스윙 길이를 기반으로 공급 및 수요 구간을 자동으로 표시합니다.
동적 구간 확장: 현재 유효한 구간은 현재 시점까지 자동으로 확장되어, 항상 최신의 레벨을 확인할 수 있습니다.
BOS (구조 돌파) 추적: 가격 움직임에 의해 구간이 돌파되면 해당 지점을 "구조 돌파(Break of Structure)"로 시각적으로 표시하여 모멘텀 변화를 추적합니다.
ZigZag 시각화 (옵션): ZigZag 라인을 오버레이하여 시장의 파동과 추세를 명확하게 볼 수 있습니다.
시장 구조 라벨 (옵션): HH(고점 갱신), LH(고점 하락), HL(저점 상승), LL(저점 갱신) 라벨을 표시하여 상세한 프라이스 액션 분석을 지원합니다.
Teemo 컬러 시스템: 표준화된 전문 컬러 팔레트(수요 구간: 티모 민트, 공급 구간: 티모 퍼플)를 사용하여 일관되고 깔끔한 차트 환경을 제공합니다.
최적화된 성능: Pine Script v6로 제작되었으며, 효율적인 배열 관리와 드로잉 한도 설정을 통해 모든 타임프레임에서 부드러운 성능을 보장합니다.
사용 방법:
공급 구간 (보라색): 매도 압력이 증가할 수 있는 잠재적 저항 영역입니다. 가격이 이 구간에 진입할 때 하락 반전 신호나 거부 반응을 주시하세요.
수요 구간 (민트색): 매수세가 유입될 수 있는 잠재적 지지 영역입니다. 가격이 이 구간에 접근할 때 상승 반전 셋업이나 반등을 확인하세요.
구조 돌파 (BOS): 구간이 무효화(돌파)되면 추세나 모멘텀의 변화를 암시합니다. 지표는 이러한 돌파를 반영하여 자동으로 구간 표시를 업데이트합니다.
사용자 설정: "Swing Length"를 조절하여 구간 감지의 민감도를 설정할 수 있습니다. "Zone Width Factor"를 통해 ATR 기반의 구간 높이를 조절하세요.
설정 항목:
Swing Length (스윙 길이): 피벗 포인트를 식별하기 위한 기간을 설정합니다 (기본값: 10).
Max History Zones (히스토리 유지 개수): 차트에 유지할 과거 구간의 최대 개수를 설정합니다 (기본값: 20).
Zone Width Factor (구간 너비 계수): ATR을 기반으로 구간의 높이를 계산하는 배수입니다 (기본값: 2.5).
Visual Styles (시각 효과): ZigZag 라인과 HH/LL 라벨 표시 여부를 켜거나 끌 수 있습니다.
Mayank algo v1.5The concept of having a strategy that is always long or
short may be scary, particularly in today’s market where you don’t know what
is going to happen as far as risk on any one market. But a lot of traders
believe that the concept is still valid, especially for those of traders who
do their own research or their own discretionary trading.
This version uses crossover of moving average and its exponential moving average.
Strategy parameters:
Take Profit % - when it receives the opposite signal
Stop Loss % - when it receives the opposite signal
LuxAlgo Swing Breakout Sequence modified by Burdy TraderSwing Breakout Sequence - Modified with Doji Detection
📊 OVERVIEW
This modified version of LuxAlgo's Swing Breakout Sequence indicator enhances the original pattern detection with an advanced Doji candlestick detection feature. The indicator identifies 5-point swing sequences (A, B, 1, 2, 3) and optionally extends to detect points 4 and 5 for complete breakout patterns.
🔍 KEY FEATURES
Automatic Swing Detection: Identifies bullish and bearish swing sequences based on customizable pivot length
Visual Sequence Mapping: Clear labeling of all sequence points (A, B, 1, 2, 3, 4, 5)
Doji Detection System (NEW): Detects doji candles forming outside the A-B range after point 2 is confirmed
Smart Timeout Logic: Automatically marks failed doji signals with red ✕ if point 3 doesn't confirm within 5 candles
Flexible Display Options: Toggle boxes, lines, paths, and customize colors
Strict/Relaxed Modes: Choose between strict equal H/L requirements or relaxed threshold-based matching for point 5
⚙️ CUSTOMIZATION
Swing Length: Adjust pivot detection sensitivity (default: 5)
Point 4 Beyond Point 2: Enable stricter point 4 placement rules
Show Point 5: Toggle double top/bottom detection
Doji Threshold: Control doji sensitivity (0.1 = 10% body-to-range ratio)
Auto/Manual Coloring: Smart color adaptation or custom scheme
💡 HOW TO USE
Bullish sequences form when price creates lower swing points that stay within defined ranges
Bearish sequences form when price creates higher swing points within ranges
Blue dots indicate potential continuation when doji appears outside A-B range
Red ✕ marks indicate doji signals that failed to confirm within 5 bars
Use confirmed sequences (points 1-4) for potential reversal/continuation setups
📈 TRADING APPLICATIONS
Identify potential reversal zones at point 5 (double top/bottom)
Spot early continuation signals via doji detection after point 2
Track multi-swing price structures for better context
Combine with volume/momentum indicators for confirmation
👍 SUPPORT THIS WORK
If you find this indicator helpful, please:
Like this script to show your appreciation
Follow me for more trading tools and updates
Share your feedback and suggestions in the comments
Your support helps me continue developing free tools for the trading community!
© CREDITS
Original indicator: Swing Breakout Sequence by LuxAlgo
Modified by:
This work is licensed under Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
creativecommons.org
⚠️ DISCLAIMER
This indicator is for educational and informational purposes only. It is NOT financial advice. Trading involves substantial risk of loss and is not suitable for all investors. Past performance does not guarantee future results. Always conduct your own research and consult with a qualified financial advisor before making any trading decisions. The author and LuxAlgo assume no responsibility for any losses incurred from using this indicator.
Advanced Predictive Market Intelligence📊 Advanced Predictive Market Intelligence - Professional Trading System
🎯 Overview
Advanced Predictive Market Intelligence is an institutional-grade, all-in-one trading indicator that combines trend analysis, predictive forecasting, momentum signals, and risk management into a single, comprehensive visual system. Designed from the ground up by thinking like a senior market architect and financial analyst, this indicator transforms complex market data into actionable intelligence.
Unlike basic indicators that only show historical data, this system predicts future price movements with confidence bands, validates signals through multiple confirmations, and provides real-time risk management metrics—all while maintaining crystal-clear visuals that don't clutter your chart.
✨ Key Features
🔮 Predictive Forecasting Engine
Linear regression-based price predictions with customizable forecast horizons
Confidence bands showing probability zones for predicted prices
Correlation strength analysis to validate prediction reliability
Visual prediction zones with color-coded boxes showing bullish/bearish targets
Slope momentum indicators showing trend acceleration/deceleration
📈 Multi-Layered Trend Analysis
Triple EMA system (fast, slow, trend filter) with dynamic color coding
Trend strength score (0-100%) quantifying market direction
Bollinger Bands for volatility context
Dynamic background coloring for instant trend recognition
Support & Resistance detection with automatic pivot points
🎯 Smart Signal System
Strong Signals: Require 5+ confirmations (EMA cross + slope + trend filter + RSI + volume)
Moderate Signals: Basic trend reversals for early positioning
Signal quality percentage displayed on each alert
Volume confirmation to filter false breakouts
Visual differentiation between high and low probability setups
💹 Momentum & Market Health
RSI (Relative Strength Index) with overbought/oversold levels
MACD histogram for momentum divergence
Volume ratio analysis showing institutional participation
High-volume breakout detection with fire emoji indicators
ATR (Average True Range) for volatility measurement
🛡️ Risk Management Suite
ATR-based stop-loss calculations (2x ATR from entry)
Dynamic take-profit targets based on predictions and volatility
Risk/Reward ratios calculated in real-time
Position size suggestions based on volatility
Market bias indicator (bullish/bearish) for overall direction
📊 Professional Dashboard
A comprehensive 11-metric control panel displaying:
Trend Strength (0-100% score)
Forecast percentage change
RSI value with color-coded warnings
Volume status (High 🔥 / Normal / Low ❄️)
ATR volatility measurement
Correlation strength (Strong/Moderate/Weak)
Momentum direction (📈 Bullish / 📉 Bearish)
Target price projection
Suggested stop-loss level
Risk/Reward ratio
Market bias (🐂 Bullish / 🐻 Bearish)
🚀 How to Use
For Day Traders:
Focus on Strong Buy/Sell signals with quality scores >70%
Check Volume Status for institutional confirmation
Use ATR-based stop losses for tight risk management
Monitor the Trend Strength score - trade only when >60% or <40%
For Swing Traders:
Look for signals aligned with the Trend Filter EMA (50-period)
Use the Forecast Target for position targets
Check Confidence Bands for realistic price ranges
Monitor Support/Resistance zones for entry/exit points
For Position Traders:
Focus on Market Bias indicator for overall direction
Use Bollinger Bands to identify volatility contractions
Watch for Strong Signals on higher timeframes (4H, Daily)
Track Correlation Strength to validate long-term trends
Risk Management Protocol:
✅ Enter on Strong Signals with >70% quality score
✅ Place stop-loss at suggested ATR level
✅ Take profit at forecast target or when opposite signal appears
✅ Only trade when Trend Strength is >60% (bullish) or <40% (bearish)
✅ Avoid trading during Weak Correlation periods
💎 What Makes This Different
1. Multi-Confirmation System
Unlike single-indicator systems, this requires multiple confirmations before generating strong signals, dramatically reducing false positives.
2. Predictive, Not Reactive
Most indicators only show what happened. This system forecasts where price is going with statistical confidence bands.
3. Built-In Risk Management
You don't need separate indicators for stop-losses or targets—everything is calculated automatically based on real volatility (ATR).
4. Information Density Without Clutter
All critical metrics are in the dashboard, while the chart remains clean with only essential visual elements.
5. Institutional-Grade Logic
The signal quality scoring, correlation validation, and multi-layer confirmation mirrors how professional trading desks analyze markets.
⚙️ Technical Specifications
Calculation Components:
EMA (Exponential Moving Average) for trend following
Linear Regression for price prediction
Pearson Correlation for slope validation
Standard Deviation for confidence bands
RSI (14) for momentum
MACD (12, 26, 9) for trend strength
ATR (14) for volatility measurement
Bollinger Bands (20, 2.0) for range analysis
Pivot Points (5, 5) for support/resistance
Optimized Performance:
Max 500 lines for prediction/support levels
Max 50 labels for signal clarity
Max 50 boxes for zone highlighting
Efficient calculations to prevent lag even on 1-minute charts
🎛️ Recommended Settings
Scalping (1m - 5m charts):
Fast EMA: 5
Slow EMA: 13
Trend Filter: 34
Prediction Horizon: 3
Confidence Multiplier: 1.0
Day Trading (15m - 1H charts):
Fast EMA: 9 (default)
Slow EMA: 21 (default)
Trend Filter: 50 (default)
Prediction Horizon: 5 (default)
Confidence Multiplier: 1.5 (default)
Swing Trading (4H - Daily charts):
Fast EMA: 12
Slow EMA: 26
Trend Filter: 100
Prediction Horizon: 10
Confidence Multiplier: 2.0
📱 Alert System
Set up automated alerts for:
🚀 Strong Buy Signals - High probability long setups
⚠️ Strong Sell Signals - High probability short setups
📊 RSI Overbought - Potential reversal warning (>70)
📉 RSI Oversold - Potential bounce opportunity (<30)
⚠️ Important Notes
This indicator is a tool, not a crystal ball:
Always use proper risk management (1-2% risk per trade)
Combine with price action analysis and fundamental research
Back-test settings on your specific market and timeframe
No indicator is 100% accurate - use stop-losses religiously
Consider market context (news, economic events, market structure)
Best Results When:
Trading in trending markets (not choppy/sideways)
Using on liquid instruments with good volume
Combining with support/resistance analysis
Following the overall market bias
🏆 Perfect For:
✅ Traders who want predictive analysis, not just historical data
✅ Those seeking high-probability setups with multiple confirmations
✅ Risk-conscious traders who need automatic stop-loss calculations
✅ Anyone wanting institutional-grade analysis without complexity
✅ Multi-timeframe traders (works on all timeframes)
✅ Both beginners (use dashboard) and professionals (customize everything)
📄 License & Usage
This indicator is provided for educational and trading purposes. Feel free to modify and customize it for your personal trading strategy. If you find it valuable, please give it a boost 🚀 and share your feedback!
SMT + BOS + RR This indicator implements a Smart Money Theory (SMT) + Break of Structure (BOS) strategy with a fixed risk/reward ratio, synchronized between two assets. The main idea is to detect discrepancies in the movements of two symbols to identify potential accumulation and reversal zones driven by institutional activity.
Key Features:
SMT Signals:
Automatically identifies divergences between two assets (e.g., BTC and ETH), highlighting potential smart money activity.
Detects trend direction through sweeps of recent highs and lows.
BOS (Break of Structure):
Filters signals based on structure break: higher highs/lower lows.
Additional ATR-based candle size check to avoid false signals.
Entry & Position Management:
Supports long, short, or both directions.
Entry type selection: on candle close (bos_close) or retest (bos_retest).
Automatic calculation of Stop Loss at the last extreme and Take Profit based on the specified risk/reward ratio (RR).
Visualization:
Arrows displayed on the chart for buy and sell signals.
SL and TP lines for clear risk management.
SMT signals marked at the top and bottom of the chart.
Settings:
Symbol A / Symbol B — choose assets for SMT analysis.
Side — trading direction: long, short, or both.
Swing Size — pivot size for detecting local highs and lows.
Risk/Reward — RR ratio for automatic TP calculation.
Min BOS Body ATR — minimum candle body size for BOS confirmation.
Best Suited For:
Traders following Smart Money concepts and looking for market structure-based signals with controlled risk.
Auto Supply and Demand and ICT ExecutionsAuto Supply and Demand and ICT Executions is a professional-grade technical analysis suite designed to automate the visualization of institutional market structure and "Smart Money" execution signals. By combining automated Supply/Demand zoning with key ICT (Inner Circle Trader) concepts, this indicator provides a complete roadmap for identifying high-probability reversal and continuation setups on any timeframe.
Core Features:
Auto Supply & Demand Zones:
Automatically identifies and plots active Supply (Red) and Demand (Green) zones based on significant market structure pivots.
Persistent Logic: Zones remain active on the chart until price "mitigates" (closes beyond) them, ensuring you never miss a retest of a key level.
ATR Clutter Filter: Uses an Average True Range (ATR) algorithm to prevent zones from overlapping, keeping your chart clean and readable.
ICT Execution Signals (MSS):
Market Structure Shifts (MSS): Automatically detects valid shifts in market structure when price breaks a key structural high or low following a liquidity sweep.
Instant Signal Labels: clearly labels breakout points with "MSS ↑" (Bullish) or "MSS ↓" (Bearish) tags.
Auto Risk/Reward Projections:
Upon detecting an MSS signal, the indicator instantly projects a Risk/Reward (R:R) Box (default 1:2) anchored to the breakout candle.
This provides immediate, visual Take Profit (Green) and Stop Loss (Red) targets, allowing for instant trade assessment without manual measuring.
Multi-Timeframe (MTF) Confluence:
Projects Higher Timeframe (HTF) Zones (default: 15-minute) directly onto your current chart.
This allows you to align your lower-timeframe entries (e.g., 1-minute) with the dominant institutional trend without switching screens.
Institutional Concepts:
Liquidity Sweeps: Highlights "Stop Hunt" pivots where price briefly breaches a recent swing high/low to trap traders before reversing.
Fair Value Gaps (FVG): Visualizes historical price imbalances (gaps) where aggressive institutional buying or selling occurred.
Silver Bullet Session: Automatically highlights the high-probability 10:00 AM - 11:00 AM NY trading window.
How to Trade with This Indicator:
Identify Structure: Wait for price to approach a Supply or Demand Zone (especially if it overlaps with an MTF Zone).
Confirm the Sweep: Look for the "Sweep" label, indicating liquidity has been grabbed.
Execute on Signal: Enter the trade when the "MSS" label appears, confirming the reversal.
Manage the Trade: Use the automated R:R Box to set your Stop Loss and Take Profit levels.
Larry Williams Qualified Trend Break Signals [tradeviZion]Larry Williams Qualified Trend Break Signals - Description
📖 Introduction
Welcome to the Larry Williams Qualified Trend Break Signals indicator. This description explains how the indicator works, its settings, and how to use it.
This indicator demonstrates Larry Williams' Qualified Trend Line Break technique - his preferred method for timing precise entries on daily charts when you already have a confirmed market setup.
---
🎯 About This Script
This indicator implements the Qualified Trend Line Break system - an entry technique that qualifies trend line breaks for better timing.
Important: This is NOT a signal generator. It's an entry timing tool for traders who already have a market setup and confirmation. Use it only after establishing weekly bias and daily confirmation.
Why We Made This Indicator:
This indicator demonstrates Larry Williams' favorite entry technique for daily timeframe trading. It's designed to be used as part of his complete methodology:
How To Use It Properly:
First, establish your setup: Check weekly chart for overall market bias (bullish/bearish)
Then confirm on daily: Look for confirmation signals on daily timeframe
Finally, use trend breaks: Enter trades only when trend breaks align with your setup direction
Important Warning: This is NOT a standalone buy/sell signal indicator. Using trend breaks without proper setup and confirmation will likely produce poor results. It's a timing tool for entries, not a signal generator.
---
About The Qualification Rules
The system improves on qualification methodology with these key changes:
For BUY signals (breaking above downtrend lines):
Break is usually bad if previous bar closed higher
But can still be good if:
Previous bar was inside the prior bar AND that prior bar closed lower
Price gaps above trend line and moves up at least one tick
Previous bar closed below its own opening price
For SELL signals (breaking below uptrend lines):
Break is usually bad if previous bar closed lower
But can still be good if:
Previous bar was inside the prior bar AND that prior bar closed higher
Price gaps below trend line and moves down at least one tick
Previous bar closed above its own opening price
---
📐 How The Qualification System Works
The trend break system is based on qualification methodology as developed by Larry Williams . It solves the problem where trend line breaks often fail and price goes back.
Trend Line Setup:
For BUY signals: Connect the two most recent declining swing highs to make a downtrend line
For SELL signals: Connect the two most recent rising swing lows to make an uptrend line
Inside Bar Rule:
A key principle: Trend breaks that occur on inside bars are completely ignored. The system only evaluates breaks that occur on regular bars, making signals more reliable.
How It Works In The Code
The indicator follows these steps:
Finds swing points: Identifies highs and lows in the price action
Draws trend lines: Connects 2 recent swing points to make trend lines
Checks inside bars: Ignores breaks that happen on inside bars
Qualifies signals: Uses the rules to check if breaks are good or bad
Shows signals: Only displays qualified BUY/SELL signals
Optional feature: Can show disqualified signals
⚙️ Settings
The indicator has 3 groups of settings to customize how it works.
---
📊 Signal Settings
Show Signals
Default: ON
ON: Displays green/red labels when trend breaks qualify for entry
OFF: Hides entry labels (trend lines still show for analysis)
Remember: These are entry TIMING signals, not standalone buy/sell signals
Signal Selection
Default: Both | Options: Buy Only, Sell Only, Both
Buy Only: Shows only BUY signals
Sell Only: Shows only SELL signals
Both: Shows both BUY and SELL signals
Break Validation
Default: Close | Options: Break Level, Close
Break Level: Signal when price touches the trend line (more signals)
Close: Signal when bar closes beyond trend line (fewer signals)
Tip: Try "Close" first for better signals
Show Disqualified
Default: OFF | Options: ON/OFF
What it does: Shows bad breaks
ON: Shows gray ❌ labels with explanations
OFF: Hides bad signals
👁️ Display Settings
Show Trend Lines
Default: ON
What it does: Shows trend lines on the chart
Looks like: Dashed blue lines connecting swing points
Goes to: Extends into future bars
Why: Shows where breakouts are expected
Show Swing Points
Default: ON
What it does: Marks highs/lows used for trend lines
Looks like: Shape markers at swing locations
Shows: How trend lines are constructed
Marker Style
Default: Circle | Options: Circle, Triangle, Square, Diamond, Cross
What it does: Choose shape for swing markers
Options: Circle, Triangle, Square, Diamond, Cross
Best choice: Circle is clear without being busy
Marker Size
Default: 3 | Range: 1-10
What it does: Controls marker size
Range: 1 (tiny) to 10 (large)
Show Inside Bars
Default: ON
What it does: Highlights inside bars
Looks like: Light orange background on inside bars
Note: These bars are ignored for break qualification
Important: Inside bars are ignored for break qualification
🎨 Colors
Signal Colors
Buy Signal (Default: Green) - Color for good BUY signals
Sell Signal (Default: Red) - Color for good SELL signals
Disqualified (Default: Gray) - Color for bad signals
Display Colors
Trend Line (Default: Blue) - Color for trend lines and markers
Inside Bar (Default: Light Orange) - Background for inside bars
💡 How To Use It In Larry Williams Methodology
Step 1 - Weekly Setup: Identify market bias on weekly chart (clear bullish/bearish trend)
Step 2 - Daily Confirmation: Find confirmation signals on daily timeframe
Step 3 - Trend Break Entry: Use qualified trend breaks only in setup direction
Important: Never enter based on trend breaks alone - always require setup + confirmation first
⚠️ Important Notice
This indicator implements Larry Williams' trend break entry technique. It should NOT be used as standalone buy/sell signals. Only use trend breaks for entry timing after you have established a proper market setup and confirmation. Poor results will occur if using signals without the complete Larry Williams methodology.
Credits: Based on Larry Williams' trading approach and qualification methodology. Swing detection logic adapted from "Larry Williams: Market Structure" by Smollet.
Breaker Blocks Signals [AlgoAlpha]🟠 OVERVIEW
This script automates the detection of Breaker Blocks, a popular smart money concept used to identify high-probability reversal zones. It monitors price action for aggressive impulses—measured through a normalized Z-Score—to identify Orderblocks. When these blocks are "broken" or invalidated by price moving through them, they transform into Breaker Blocks. These zones act as "flipped" support or resistance, offering traders specific areas to look for retests and trend continuations. By handling the complex management of zone life-cycles and mitigation, this script provides a clean, real-time map of institutional supply and demand shifts.
🟠 CONCEPTS
The indicator relies on the relationship between price momentum and structural invalidation. It first identifies "impulsive" candles by calculating a Z-Score of price distance covered over a specific window. A Z-Score above 4 marks an "Algorithmically Significant" move. When such a move occurs, the script identifies the last opposite-colored candle (the Orderblock) and draws a gray zone. The transformation happens when price closes entirely through one of these gray zones. This "mitigation" is what triggers the creation of a Breaker Block: an old bearish supply zone becomes a bullish demand zone, and vice versa. This transition reflects a shift in market regime where previous trapped participants are forced to exit, often leading to price rejections at these newly formed levels.
🟠 FEATURES
Automated Breaker Transformation : Instantly flips mitigated Orderblocks into colored Breaker Blocks (Bullish/Bearish).
Rejection Markers : Small arrow icons appear when price enters a Breaker Block and shows signs of respect/reversal.
Comprehensive Alerts : Notifications for both the formation of new breakers and real-time price rejections.
🟠 USAGE
Setup : Add the script to your chart. It is effective on most timeframes, but many traders prefer the 15m or 1h for intraday structure. Use the "Z-Score Window" to adjust sensitivity; 100 is standard, but lower values (e.g., 50) will find more frequent, smaller impulses.
Read the chart : Gray boxes are "Pending" blocks. If price closes above a gray bearish box, it turns into a Bullish Breaker (Green). If price closes below a gray bullish box, it turns into a Bearish Breaker (Red). Look for price to return to these colored zones; the "▲" and "▼" symbols indicate the script has detected a rejection from that level.
Settings that matter : Prevent Overlap is useful for avoiding "cluttered" zones in ranging markets. Max Box Age is critical; it ensures that very old, irrelevant zones are removed from your chart after a set number of bars, keeping your technical analysis current and focused on recent price action.
9 MME + 20,50,200 MMA (welliott_trading)Script que no mesmo gráfico utiliza um indicador para plotar 4 médias
SilverHawk Pattern + Trend ScannerSilverHawk Pattern + Trend Scanner
This indicator scans for common candle patterns (Evening/Morning Star, Engulfing, Kicker) and displays adaptive trend channels (short/long) with strength metrics.
Features:
- Candle patterns with reversal/continuation % heuristic
- Adaptive trend channels (best short/long length selected by Pearson R)
- ADX trend power and channel alignment note
Settings:
- Show specific patterns: toggle visibility
- Channel lengths: auto-selected based on best correlation
- Alerts on pattern detection
Best used on H1 to D1 timeframes in Forex or indices for pattern confirmation and trend analysis. Use with proper risk management and confirmation.
Educational tool only. Not financial advice. Trading involves risk.
[GOLD PRO] v2.0 + WebhooksThis is a comprehensive multi-timeframe divergence and structure trading indicator specifically optimized for Gold (XAU/USD) trading, with full support for Forex, Crypto, and other instruments. The indicator combines RSI divergence detection, market structure analysis, and multiple confluence factors to generate high-quality trading signals with complete position management.
LIVE PRICE + TIMER v2LIVE PRICE + CANDLE TIMER Indicator
The Live Price + Candle Timer indicator displays the current market price in a clear, fixed on-screen panel, combined with a real-time countdown to the candle close.
It is designed to help traders improve timing, discipline, and entry precision, especially on fast-moving markets like XAU/USD (Gold).
Key Features
Live Price Display
Shows the current price continuously in a clean, easy-to-read panel.
Bullish / Bearish Color Coding
Green background when the current candle is bullish
Red background when the current candle is bearish
This provides instant market sentiment at a glance.
Candle Close Countdown (mm:ss)
Displays the remaining minutes and seconds until the current candle closes, helping you avoid early entries and wait for confirmation.
Adjustable Panel Size
Choose between Small, Medium, or Large panel sizes to match your screen layout and trading style.
Candle Close Alert (Optional)
An optional alert that triggers when the candle closes, ideal for traders who enter only after candle confirmation.
Fixed Screen Position
The panel stays visible on the chart without overlapping candles, making it perfect for active intraday trading.
Best Use Cases
Gold (XAU/USD) trading
Lower timeframes (1m – 15m)
Traders who wait for candle close confirmation
Avoiding FOMO and premature entries
This indicator acts as a simple but powerful trading HUD, keeping the most important information — price direction and time — always in sight.
Anchored VWAPThe Anchored VWAP Indicator: A Dynamic Reference for Pivotal Market Events
This script implements a specialized and highly customizable trading tool known as an Anchored Volume-Weighted Average Price (VWAP). Its core innovation and primary utility lie not in a novel mathematical formula, but in its temporal flexibility. Unlike the standard VWAP, which resets at the fixed start of each trading day, this indicator allows the trader to manually define the precise moment from which the calculation begins. This transforms it from a generic daily benchmark into a powerful, event-specific dynamic support and resistance level.
What It Does and How It Works
The indicator plots a single, continuous line on the price chart. This line represents the average price paid for an asset over a specified period, weighted by trading volume, but crucially, starting from a user-chosen timestamp. The calculation follows this logic:
Anchor Point Definition: The user specifies a "Start Time" (e.g., "2024-05-22 11:45:00"). This is the anchor—the moment deemed significant for a new market phase.
Initialization: On the very first candle at or immediately after the anchor time, the indicator initializes its calculation. It uses the candle's high price and volume to set an initial value, establishing a starting point for the cumulative calculation.
Cumulative Calculation: For every subsequent candle, the script calculates the Typical Price (High + Low + Close) / 3 for that period. It then:
Adds (Typical Price * Volume) to a running cumulative total.
Adds the Volume to a running cumulative volume total.
VWAP Plotting: The anchored VWAP line for each candle is simply the cumulative total price-value divided by the cumulative total volume up to that point. The line is only plotted for the period on and after the user-defined anchor time.
How to Use It: The Strategic Application
The power of this tool is unlocked through strategic anchor point selection. It is not a standalone signal generator but a dynamic reference framework for price action. It belongs to the family of Price Action-Based, Event-Driven Analysis and Dynamic Support/Resistance methodologies. Traders use it to contextualize price movement relative to a key market "reset" event.
Common anchor points include:
Major Economic News Releases: Anchor at the exact time of a CPI, FOMC, or jobs report to see the fair-value price discovery after the news, filtering out prior, irrelevant noise.
Significant Technical Breaks: Anchor at the moment a price conclusively breaks a major trendline, a multi-month high/low, or a key chart pattern (like the neckline of a head and shoulders). The VWAP then acts as a dynamic gauge of momentum following the breakout.
Session or Shift Changes: For 24-hour markets, anchor at the open of a specific session (e.g., London Open, US Open) to analyze intra-session flow.
Instrument-Specific Events: Anchor at the start of a merger announcement, earnings call, or product launch.
Once anchored, traders interpret price interaction with the line:
Trend Validation: Price sustaining above a rising anchored VWAP (anchored at a breakout point) confirms bullish momentum. Conversely, holding below a falling VWAP confirms bearish momentum.
Dynamic Support/Resistance: In a trending move, pullbacks towards the anchored VWAP often find support (in uptrends) or resistance (in downtrends). This makes it a potential area for trend-continuation entries.
Mean Reversion & Exhaustion Signals: A sharp, high-volume move far away from the anchored VWAP may signal an overextended market, prompting watch for a reversion back to the mean (the VWAP line).
The Core Philosophy and Rationale
The underlying principle is that volume-confirmed price action following a defining event establishes a new, more relevant fair-value equilibrium. The standard daily VWAP includes all overnight or pre-event noise, which can distort the relevant average for the new market regime initiated by the event.
This anchored approach:
Filters Irrelevance: It isolates analysis to the market structure after the catalyst, providing a cleaner analytical canvas.
Respects Market Microstructure: By weighting price by volume, it acknowledges that high-volume price levels are more significant than low-volume spikes, creating a more robust and "traded" average.
Provides a Self-Adjusting Baseline: It creates a moving benchmark that evolves with the new trend, offering a continuous, objective measure of whether prices are becoming relatively "expensive" or "cheap" within the current move, not compared to the entire day.
In essence, this Anchored VWAP shifts the perspective from a fixed, time-based cycle (the trading day) to a flexible, event-based cycle. It empowers traders to draw a dynamic line in the sand at their chosen moment of structural shift, turning a simple average into a sophisticated gauge of post-event market sentiment and momentum.
HFT Price Action Framework[by Abhishek]This indicator helps traders spot high-probability BUY & SELL opportunities by combining trend direction and momentum into a simple, clean visual format.
It is designed to remove noise and keep you focused on only quality trade setups.
✨ Key Features
✅ Clear BUY / SELL signals
✅ Identifies trend direction
✅ Works on all timeframes
✅ Suitable for Intraday & Swing Trading
✅ Can be used on Stocks, Indices, Crypto & Forex
📊 How to Use
🔹 BUY Signal: Appears when the trend turns bullish with strong momentum
🔹 SELL Signal: Appears when the trend turns bearish or momentum weakens
🔹 Best results when used with support & resistance or price action confirmation
🛡 Risk Management
Always use a proper stop-loss and risk management.
No indicator is 100% accurate — discipline matters more than signals.
⚠️ Disclaimer
This indicator is for educational purposes only.
It does not provide financial advice.
The creator is not responsible for any profit or loss incurred
HFT Price Action Framework[by Abhishek]This indicator helps traders spot high-probability BUY & SELL opportunities by combining trend direction and momentum into a simple, clean visual format.
It is designed to remove noise and keep you focused on only quality trade setups.
✨ Key Features
✅ Clear BUY / SELL signals
✅ Identifies trend direction
✅ Works on all timeframes
✅ Suitable for Intraday & Swing Trading
✅ Can be used on Stocks, Indices, Crypto & Forex
📊 How to Use
🔹 BUY Signal: Appears when the trend turns bullish with strong momentum
🔹 SELL Signal: Appears when the trend turns bearish or momentum weakens
🔹 Best results when used with support & resistance or price action confirmation
🛡 Risk Management
Always use a proper stop-loss and risk management.
No indicator is 100% accurate — discipline matters more than signals.
⚠️ Disclaimer
This indicator is for educational purposes only.
It does not provide financial advice.
The creator is not responsible for any profit or loss incurred.
HoneG_CCIv21HoneG_CCIv21
This is a signal tool capable of both counter-trend and trend-following trading. Apply it to 1-minute charts.
For trend-following, it features a rapid-fire mode. When conditions align, rapid-fire mode activates, and two indicators signaling the rapid-fire timing will turn ON/OFF in sync with price extension moments.
逆張りも順張りも出来るサインツールです。１分足チャートに適用してください。
順張りには連打モードがあり、条件が揃うと連打モードが発動し、連打タイミングを知らせる二か所の表示が、価格が伸びるタイミングに合わせてON/OFFします。
Detector SMT Divergences
SMT Divergences · SMT Divergences Detector
What it is and what it is used for
SMT Divergences is a Smart Money Technique (SMT) divergence detector that compares the asset you are trading with a comparative index (by default, the DXY).
Its purpose is to help you identify potential reversals or continuations when price action shows a misalignment versus the comparative index, which often appears near key areas such as liquidity zones or range extremes.
In practical terms, the indicator:
Detects bearish divergences (marked as -SMT) when the chart price and the comparative index are not confirming the same momentum.
Detects bullish divergences (marked as +SMT) when the opposite situation occurs.
Draws a line connecting the key points and, if enabled, displays a +SMT / -SMT label.
