ICT First Presented FVG - PM Session [Davinci]ICT Concepts
First Presented FVG - PM Open
It will give you the first presented FVG for the PM session
Titik pangsi dan tahap
ICT First Presented FVG - NY Open [Davinci]ICT Concepts
First Presented FVG - NY Open
It will give you the first presented FVG for the AM session
Session Open Range + PDH/PDL Levels – Scalper Tool“Session Open Range + PDH/PDL Levels – Scalper Tool”
Smart indicator that automatically detects:
• Previous Day High & Low (PDH/PDL).
• Opening range of the session (first 15 and 5 minutes).
Key Features:
• Helps anticipate price direction after breakouts or breakdowns.
• PDH/PDL are often liquidity zones and may act as support or resistance depending on price behavior.
• These levels can become key reversal or continuation zones.
• Ideal for momentum and liquidity traders on lower timeframes.
• Supports alerts for confirmed breakouts or breakdowns.
By Hatemish
Version 1.0 | 2025
_
مؤشر ذكي يحدد تلقائيًا:
أعلى وأدنى سعر لليوم السابق (PDH/PDL).
نطاق افتتاح الجلسة (أول 15 دقيقة و5 دقائق).
المميزات:
يساعد في التعرف على الاتجاه المتوقع للسعر بعد الاختراق أو الكسر.
مستويات اليوم السابق تُستخدم كمناطق سيولة، وقد تعمل كدعم أو مقاومة حسب حركة السعر.
قد تتحول هذه المستويات إلى نقاط انعكاس أو استمرار للاتجاه.
مناسب لمتداولي الزخم والسيولة على الفريمات الصغيرة.
يدعم التنبيهات عند الكسر أو الاختراق المؤكد.
By Hatemish
Version 1.0 | 2025
Cycle Theory + Frequency TheoryCycle Theory attempts to predict, through volatility, support/resistance points where the market may reach/reverse a trend. This theory's calculation is based on a reference candle that the user chooses, usually the first candle of the day/week's session. From this point on, if the level is broken upwards or downwards, the 1st Cycle begins with the same distance between the high/low or open/close of the reference candle. From the 2nd Cycle onwards, the size becomes the sum of all the last cycles formed, and so on.
Frequency Theory is similar, but its levels always have the same size as the high/low or open/close of the reference candle.
Dynamic Zone Risk Manager [Algo Seeker]Introduction
The Algo Seeker: Dynamic Zone Risk Manager excels in both ranging and trending market conditions. It merges two critical trading components: a zone identification system that allows traders to anticipate price movement within structured ranges and a dynamic risk assessment table that optimizes position sizing based on account parameters and zone-specific characteristics, while also calculating trade-specific risk and reward.
For traders struggling with consistent risk management and identifying high-probability zones, particularly in challenging ranging market conditions, this tool provides a structured framework that enhances precision in trading decisions and capital allocation — addressing two of the most common challenges in trading.
🟠 Unique Features & Trading Benefits
Advanced Zone Structuring:
🟢 The indicator adapts to different trading styles through Scalp, Swing, and Investor modes. Scalp mode generates tight, precise zones optimized for intraday price movements and quick trades completed within minutes or hours. Swing mode creates intermediate zones calibrated for positions held for the entire day or a few weeks, providing optimal zone structures for medium-term trading approaches. Investor mode establishes broader zones designed specifically for positions spanning a few weeks to a few months, identifying major support and resistance levels for extended holding periods.
🟢 These zones are particularly useful during ranging markets. They define clear price ranges within which movement may oscillate based on the selected trading horizon. Such clarity helps traders anticipate potential bounce areas and manage trades more effectively, even when the market lacks a clear directional trend.
🟢 The system transforms static price levels into comprehensive trading zones with clearly defined boundaries. The multi-dimensional architecture creates actionable entry, exit, and management levels that remain relevant across different market conditions.
Unique Risk Management:
🟢 A dynamic risk table that calculates position sizing based on the trader's actual account size. When traders select Scalp, Swing, or Investor mode, the table automatically computes the optimal capital allocation specifically for that mode and the current zone.
🟢 The table provides exact dollar amounts for both risk and potential reward based on current price position within the zone. If price is already moving through a zone, the table dynamically updates to show how much of the potential reward remains available.
🟢 This precise risk management system gives traders a clear, quantified understanding of exactly how much capital to allocate per trade, the specific dollar amount at risk, and the remaining profit potential—all updating in real-time as price moves through the zones.
Dynamic Cost Basis Analysis:
🟢 Continuously calculates optimal midpoints within each zone, creating additional precision pivot points that traditional tools can lack. These dynamic reference points enhance trade accuracy in ranging markets while providing essential data points for the integrated risk management calculations.
🟠 The Power of Integration: Zones Meet Risk Management
The true power of the Algo Seeker: Dynamic Zone Risk Manager emerges when these components work together as a unified system. The trader-selected strategy zones and dynamic risk table create a complete trading ecosystem that addresses the three critical elements of successful trading:
1. Precision Entry Points: Zone boundaries provide clear entry thresholds optimized for your selected trading mode (Scalp, Swing, or Investor), eliminating guesswork around optimal trade initiation points.
2. Disciplined Risk Control: The risk table's exact dollar calculations remove emotional decision-making from position sizing and stop placement, creating a consistent risk approach regardless of market volatility.
3. Strategic Exit Management: As price moves through zones, both visual cues and quantified metrics guide intelligent profit-taking decisions, preventing the common mistake of exiting too early or holding too long.
This synchronized framework transforms theoretical analysis into practical execution, giving traders a complete toolset for managing the entire lifecycle of each trade with precision and confidence.
🟠 Additional Algo Benefits
Psychological Trading Edge:
The Algo Seeker: Dynamic Zone Risk Manager addresses the most challenging aspect of trading—emotional decision-making. By transforming complex risk/reward calculations into clear, quantified metrics, the system eliminates decision paralysis and reactionary trading. Traders gain immediate clarity during volatile conditions through the visual integration of precise zones and risk parameters. This psychological framework cultivates discipline and confidence when market noise typically triggers impulsive decisions, allowing for consistent execution even during challenging market environments.
Efficiency and Time Value:
The system delivers exceptional time efficiency by eliminating the need for manual risk calculations, zone identification, and position sizing. What typically requires multiple tools and extensive spreadsheet calculations is seamlessly integrated into a unified interface. Traders receive immediate, actionable insights without the cognitive burden of juggling separate indicators. This allows professionals to focus on strategic decisions rather than technical calculations.
Advanced User Customization:
Unlike one-size-fits-all indicators, the Algo Seeker: Dynamic Zone Risk Manager adapts to individual trading methodologies. The system accommodates personalized account parameters and allocates capital differently based on three distinct trading modes—scalping, swing trading, and investing. This flexibility allows professional traders to implement their unique strategy while maintaining precise risk control across different positions and time horizons. The customizable table positioning and color schemes further enhance workflow integration for diverse trading environments.
🟠 How to Use
Initial Setup
1. Lookback Parameter: The Lookback Period determines which candle data the Dynamic Zone Risk Manager uses to establish trading zones:
🟢Lookback = 1 (Default): Uses the most recent closed candle to calculate zones. This provides stable analysis based on completed price action and is recommended for most trading scenarios.
🟢Lookback = 0: Uses the current, still-forming candle. This offers more immediate responsiveness, but zones may change as the candle develops. For consistent zone analysis, Lookback = 1 typically offers a better foundation.
2. Configure Account Parameters: Input your total trading capital in the settings panel to customize risk calculations specific to your account size.
3. Select Trading Mode: Choose between Scalp, Swing, or Investor modes based on your preferred trade style:
🟢Scalp: For intraday movements (minutes to hours)
🟢Swing: For medium-term positions (days to weeks)
🟢 Investor: For longer-term positions (weeks to months)
4. Account Parameters Setup: The risk management component requires your account size to provide accurate position sizing calculations.
🟢Total Account Size: Enter your total trading capital in the "Total Account Size ($)" input. All risk calculations are based on this value.
🟢Trading Allocation Percentages: The system allows you to divide your capital across three trading modes.
1. Scalp Allocation (%): Percentage of capital reserved for short-term trades
2. Swing Allocation (%): Percentage of capital for medium-term positions
3. Invest Allocation (%): Percentage of capital for longer-term investments
These percentages can be customized to match your personal trading strategy and risk tolerance.
Margin Multiplier: Adjust the margin multiplier value based on your broker's requirements and your preferred leverage.
The system uses these parameters to calculate appropriate position sizes for each trading mode, ensuring your risk exposure remains aligned with your capital management plan.
5.Visual Customization: Adjust color schemes and table positions to optimize for your workspace layout and visual preferences.
🟠 Risk Table Explanation
The dynamic risk tables provide real-time position sizing and risk metrics as price moves through different zones:
1. Zone Column: Displays the current zone where price is located.
2. Zone Size: Shows the total price range of the current zone.
3. Trade Type: Indicates the trading style (Scalp, Swing, or Invest).
4. Shares: Displays the calculated position size (number of shares) based on your account parameters and the current zone.
5. Risk($): Shows the approximate dollar amount at risk if the trade moves against you within the zone.
6. Reward($): Displays the potential dollar return if price moves completely through the zone in your favor.
7. Left: Indicates how much potential movement remains within the current zone based on the latest price.
The table updates dynamically as price moves, giving you real-time risk/reward information. Each trading style is displayed separately, allowing you to compare potential position sizes across different trade modes while maintaining consistent risk management.
🟠 Strategic Execution
Strategy Usage Example
The Algo Seeker: Dynamic Zone Risk Manager provides a complete framework for precise trading decisions. Here's how you might leverage its power:
1. Zone-Based Trading: The indicator identifies key zones and levels that serve as powerful pivot points. These are not arbitrary levels but mathematically derived zones where price is likely to react. Use these zones directly for your trading decisions.
2. Precision Entries: For long positions, enter near the lower boundary of a zone with targets at the upper boundary. For shorts, enter near the upper boundary with targets at the lower boundary. These levels identify potential entry points based on the underlying market structure.
3. Risk Management: The zone, level, or cost basis below your entry (for longs) or above your entry (for shorts) can serve as logical places to set stop losses, helping you define your risk on each trade.
4. Position Sizing Precision: Use the exact share/contract quantities displayed in the risk table. This eliminates guesswork in position sizing and provides both risk and profit calculations that align perfectly with your capital management strategy.
5. Strategic Exits: Take profits at the target zone boundaries identified by the indicator. These levels represent mathematical points where price may encounter resistance or support, providing potential exit opportunities.
6. Advanced Strategy Options:
🟢Consider taking partial profits at cost basis (midpoint) levels
🟢Trade from zone to zone using the defined boundaries
🟢Scale in or out at specific zone transitions
🟢Set trailing stops at subsequent zone boundaries as price progresses
The strength of this indicator lies in its ability to provide all the critical decision points needed for a complete trade - from entry to exit, with precise position sizing - all derived from its sophisticated algorithmic analysis rather than subjective interpretation.
🟠 Alert Configuration
1. Zone Crossovers: Set alerts for when price transitions between key zones.
2. Cost Basis Interactions: Configure notifications for when price approaches optimal entry points.
The Algo Seeker Wizard Ultra Risk represents years of development and refinement in professional trading environments. Its integration of sophisticated zone identification with precise risk management creates a comprehensive framework that transforms theoretical market analysis into actionable trading decisions with quantified risk parameters.
OLX Pro - ( OPTION LEADERS ) V1 OLX PRO – A Scalping Indicator for Intraday Traders
OLX PRO is a powerful trading indicator designed for scalping and intraday trading. It leverages order blocks and liquidity zones to define strong price levels that help traders identify market direction with precision.
Key Features:
✅ Market Direction Confirmation: Identifies strong price zones—when broken, they determine the market trend.
✅ Clear Profit Targets: Provides 4 precise target levels for trade management.
✅ Dynamic Daily Updates: Price zones and targets refresh daily to align with market movements.
✅ Scalping-Friendly Strategy: Traders can enter trades after a zone breakout with a retest confirmation—whether for a Call (long) or Put (short) position.
How to Get Access?
🔒 This is an invite-only script. If you're interested in testing it , check the author's profile for more details.
OLX PRO – مؤشر خاص بالسكالبينق والتداول اليومي
OLX PRO هو مؤشر مخصص لمتداولي السكالبينق والتداول اليومي، حيث يعتمد على الأوردر بلوك والسيولة لتحديد مناطق سعرية قوية تساعد في تحديد الاتجاه واستهداف الأهداف بدقة.
مميزات المؤشر:
✅ تحديد الاتجاه: يكشف عن مناطق سعرية هامة، وعند كسرها يتم تأكيد الاتجاه المتوقع.
✅ أهداف محددة: يوفر 4 مستويات مستهدفة تساعد في تحديد نقاط الخروج وجني الأرباح.
✅ تحديث تلقائي يومي: تتغير المناطق السعرية والأهداف بشكل تلقائي يوميًا وفقًا لحركة السوق.
✅ استراتيجية مرنة للسكالبينق: يمكن الدخول بعد كسر المنطقة مع إعادة اختبارها، سواء في اتجاه الصعود (Call) أو الهبوط (Put).
كيف تحصل على المؤشر؟
🔒 هذا المؤشر مغلق ويتطلب دعوة خاصة. إذا كنت مهتمًا بتجربته، يمكنك الاطلاع على ملف المؤلف لمزيد من التفاصيل.
Multi-Timeframe EMAs with PivotThis is a well-designed multi-timeframe EMA indicator with pivot points for TradingView. Here's a detailed analysis:
Core Components
Multi-Timeframe EMAs
Tracks 5, 20, and 48-period EMAs across 4 timeframes (1m, 5m, 15m, 1h)
Uses request.security() to fetch higher timeframe data accurately
Each EMA is toggleable via input settings
Pivot Point System
Calculates classic pivot point: (Prev High + Prev Low + Prev Close)/3
Flexible timeframe selection (default: Daily)
Displays as a yellow line with labeled value
Visual Design
Color-coded EMAs for easy identification
Clean plotting with na values for disabled EMAs
Dynamic pivot line that auto-centers on last bar
AO.421. Fibonacci levels Intraday High/LowFibonacci Levels Intraday High/Low
This indicator automatically plots Fibonacci retracement and extension levels based on intraday high and low prices, providing traders with accurate support and resistance zones for intraday trading.
Features:
Dynamic Fibonacci Levels: Calculates key retracement and extension levels from the day’s high and low.
Intraday Precision: Ideal for scalping and day trading strategies.
Reversal & Breakout Signals: Identifies potential reversal and breakout points using Fibonacci confluence.
Customizable Levels: Allows users to adjust Fibonacci ratios to suit their trading style.
Visual Clarity: Clear and distinct lines for easy identification of key levels.
Perfect for intraday traders seeking reliable support and resistance zones to enhance trade timing and decision-making!
OP FOREX Week Days LevelsOP FOREX Week Days Levels Indicator
The OP FOREX Week Days Levels indicator is a specialized technical tool designed to analyze key support and resistance levels based on unique numerical patterns. Developed using advanced Pine Script logic, this indicator caters to traders seeking a fresh perspective in market analysis, particularly for gold price movements.
How Does the Indicator Work?
The indicator identifies support and resistance levels based on daily numerical patterns:
Monday: Levels are determined using numbers whose digits sum to 2 or 7 (e.g., 11 → 1+1=2, 16 → 1+6=7).
Tuesday: Levels are based on numbers whose digits sum to 3 or 6.
Wednesday and Thursday: Levels are calculated using numbers whose digits sum to 4 or 5.
These mathematical principles provide traders with unique, predictive insights into market behavior.
Levels are updated automatically at the beginning of each trading day, except Friday.
Features:
✔ Unique Calculations – Uses innovative, day-specific numerical patterns.
✔ Daily Auto-Updates – Automatically refreshes levels for precision in daily trading.
✔ User-Friendly Interface – Simple and intuitive design for easy application.
✔ Gold-Specific Analysis – Optimized for analyzing price movements in the gold market.
How to Use the Indicator?
Load the indicator on a 15-minute timeframe chart.
Observe the displayed levels corresponding to daily numerical patterns.
Incorporate these levels into your trading strategy, combining them with price action analysis for maximum efficiency.
⚠ Disclaimer:
This indicator is a technical analysis tool and does not guarantee profits. It is recommended to use this indicator alongside robust risk management strategies.
TVC:GOLD
Swing Structure + Session Sweeps“Scalper-Friendly Trend & Sweep Detector”
Swing Structure + Session Sweeps with TEMA Cloud
This powerful all-in-one tool is designed for intraday traders, swing traders, and scalpers who want to spot high-probability reversals, trend continuations, and liquidity sweeps with confluence.
🔹 Core Features
Multi-layered TEMA Cloud (9, 20, 34, 50) for clear trend structure
Dynamic Bull/Bear labels when the trend flips
Centerline for TEMA 20 to visualize core trend direction
Session-based liquidity sweep detection (Asia, London, NY)
Volume and absorption dots to catch hidden pressure
Swing high/low detection (external and internal)
Visual VWAP, daily highs/lows, and customizable session zones
Optional alerts for volume spikes, absorption, and reversal sweeps
📈 Use it to:
Confirm directional bias
Anticipate pullbacks and breakouts
Identify volume-backed reversals
Align trades with session strength and swing confluence
⚙️ Built for scalpers, intraday opportunists, and precision chartists alike.
Double Opening Range Breakout (2x ORB) [GIFtrader]NOTE: The foundation of this code was built upon the Opening Range with Breakouts & Targets indicator. However, the code was adjusted to fit more of my charting desires. Hopefully you find it as useful as I do. I'm always open to suggestions, so please feel free to share. Thank you!
This indicator includes two opening range breakout (ORB) levels.
ORB 1 is defaulted to the 5 minute timeframe.
ORB 2 is defaulted to the 60 minute timeframe. The 60 minute ORB is often referred to as the "initial balance" (IB).
There is an optional table that will let you know if the candle close is above or below the ORB 1 and above or below ORB 2 (IB).
There is also an option to fill between the candle close and the IB after a breakout occurs, highlighting the bias towards that direction.
Initial Balance:
In trading, the IB refers to the price range formed during the first hour of a trading session, often viewed as a key area of support and resistance for the day.
Support and Resistance: The IB high and low can act as potential support and resistance levels for the rest of the trading day.
Market Intent:The IB can help traders gauge the market's initial direction and potential for the day.
Institutional Activity: The first hour is often a period of significant activity for institutional traders, making the IB a valuable indicator.
How to Use:
Identify the ORB levels.
Look for Breakouts: Pay attention to whether the price breaks above the IB high or below the IB low, as this could signal a potential trend continuation.
Consider Volume: Analyze the volume during both ORB formations to assess the strength of the market's initial movement.
Confluence with Other Levels: Combine the ORB with other technical analysis tools and levels to refine your trading strategy.
Smart Money Pivot Strategy [Jason Kasei]This strategy is designed to identify key pivot points (Pivot High and Pivot Low) in the market and leverage the "Smart Money" concept to capture price breakout opportunities. It supports both long and short trades, offering customizable stop-loss (SL) and take-profit (TP) settings, while visually plotting pivot points and breakout signals on the chart.
Core Features
Pivot Point Detection:
Utilizes ta.pivothigh and ta.pivotlow functions to detect the highest (Pivot High) and lowest (Pivot Low) points within a specified period (default: 20 bars).
Trading Signals:
Long Signal: Triggered when the price breaks above a previous Pivot High, indicating a potential uptrend.
Short Signal: Triggered when the price breaks below a previous Pivot Low, indicating a potential downtrend.
How It Works
Detects Pivot High (PH) and Pivot Low (PL) over the specified period and records their price and time.
Triggers a long entry when the price breaks above a Pivot High and a short entry when it falls below a Pivot Low.
Sets exit conditions automatically based on predefined SL and TP percentages after entry.
Plots breakout points and levels on the chart for analysis.
Considerations
The strategy relies on accurate pivot point detection; adjust the period parameter based on market volatility.
In highly volatile markets, consider widening the stop loss to avoid frequent triggering.
Combine with other indicators or analysis methods to validate signals and avoid blind trading.
GLB - Green Line BreakoutThis script helps traders automatically detect Green Line Breakouts (GLBs) — a concept popularized by Dr. Eric Wish. A GLB occurs when a stock breaks out above a long-term pivot high that hasn’t been touched for a specified confirmation period (e.g., 3 months).
📌 Key Features:
Pivot High Detection based on customizable pivot strength.
Flexible Lookback Periods: Choose from 1 week to 5 years or ATH.
Confirmation Logic: Ensures the pivot remains unbroken for a set period before being marked as valid.
Breakout Detection: Marks the first breakout bar with a labeled event.
Dynamic Timeframe Support: Use daily bars or scale automatically with your chart's timeframe.
Historical Anchoring: Draws persistent lines from confirmation to breakout, helping visualize past GLBs.
🛠 Settings Include:
Pivot Strength
Timeframe Mode (Daily or Current)
Lookback Period (1W–ATH)
Confirmation Period (1W–1Y)
TraderPro+Friends, I'm glad to welcome you. I want to present a unique trading tool - TraderPro+
The essence of this indicator is simple yet brilliant. Using ATR deviation can achieve a lot. The indicator evaluates ATR deviation, and when price reaches critical conditions, the indicator gives either a long or short signal. Now let's discuss the possible settings.
You have extremely flexible options for configuring how the indicator works.
'ATR Period' determines which ATR period will be used for the WMA pair that generates signals. The larger the parameter, the smoother the price channel becomes, and vice versa.
'ATR period for stop/take' determines which ATR period will be used to calculate the ratio of stop-loss and take-profit levels.
'ATR multiplier for stop-loss' adjusts the deviation of the stop-loss position.
'ATR multiplier for take-profit 1' allows you to adjust the deviation of the first take-profit level.
'ATR multiplier for take-profit 2' allows you to adjust the deviation of the second take-profit level.
'ATR multiplier for take-profit 3' allows you to adjust the deviation of the third take-profit level.
'ATR multiplier for take-profit 4' allows you to adjust the deviation of the fourth take-profit level.
'ATR multiplier for take-profit 5' allows you to adjust the deviation of the fifth take-profit level.
'WMA 1 period' and 'WMA 2 period' determine the period used in the moving averages that create the price channel.
'ATR multiplier for WMA 1 deviation' and 'ATR multiplier for WMA 2 deviation' control the deviation of the price channel boundaries. The larger these parameters, the less frequent the signals will be, and vice versa.
You can also optionally enable or disable the display of the price channel using 'Show WMA lines' and keep only the signal display.
I'd also like to give some recommendations regarding profit-taking for trades with our tool. It's recommended to move the stop to breakeven when the first take-profit is reached, and when the second take-profit is reached, close the entire position. Based on my observations, this approach is the most effective.
Now, how do you understand which parameters will be the best? We have a statistics table that will display information about the profitability or unprofitability of our selected parameters.
The table contains information about the total number of trades, the number of profitable trades, and shows the total profit across all trades that could have been achieved if we traded all these positions without using leverage.
In other words, it indicates the total percentage of pure price movement across all profitable trades. There's also information about how many breakeven trades there were, meaning how many trades would close at zero if we followed the recommendation I gave earlier. And the number of unprofitable trades and their total loss. The total is also shown, which helps us understand whether our strategy is profitable or unprofitable. This way, you can select the best ratio for your trades and trade as profitably as the tool allows.
In addition, you have the ability to use alerts to send notifications to your social media.
I wish you luck in using this indicator!
Pivots WSGTAThe Pivots WSGTA indicator is a multi-method Pivot Points indicator used in the WSGTA course, using the dotted lines instead of the standard solid lines in TradingView. This indicator is designed for traders who want to identify key support and resistance levels based on higher timeframes. It calculates pivot levels using various popular methods—including Classic, Traditional, Camarilla, Woodie, Fibonacci, and DM —and plots them on your chart with clean, color-coded circles.
Each level is labeled with its respective identifier (e.g., R1, S2, Pivot) to provide quick visual reference directly on the most recent bar, without cluttering the chart.
ORB Lines - Opening Range Breakout [GC Trading Systems]A simple indicator that draws your opening range + custom fib extension targets.
Breaking Structures (javieresfeliz)This TradingView script is designed to identify market structure changes, using a break of highs and lows approach, as well as technical indicators such as ATR, RSI, and EMAs (Exponential Moving Averages). It is aimed at detecting bullish and bearish trends, signaling possible entry and exit points based on various factors. It also offers additional confirmations to avoid false signals and provides a clear visualization of buy and sell signals.
Main Features:
Indicators Used:
ATR (Average True Range): Used to calculate a volatility range, which helps set stop-loss levels and price targets based on the current market volatility.
EMAs (50 and 200): Exponential Moving Averages (EMAs) are used to determine the short-term and long-term trends. The 50-period EMA is used to identify the short-term trend, while the 200-period EMA is used to identify the long-term trend.
RSI (Relative Strength Index): Used to identify overbought or oversold conditions in the market, providing additional buy or sell signals.
Volume: Used to confirm the validity of a signal. An increase in volume can confirm a structure break and provide more reliability to the signal.
Break of Structure Detection (BOS):
Bullish Break: Generated when the price surpasses previous highs.
Bearish Break: Generated when the price falls below previous lows.
Change of Character (CHOCH):
Bullish Trend: Defined by a close above the open and above the 50 EMA.
Bearish Trend: Defined by a close below the open and below the 50 EMA.
Buy and Sell Conditions:
Buy (Long): Activated when several conditions are met, including a bullish change of character, a bullish structure break, the price closing above the previous value plus a multiple of the ATR, and additional confirmations from RSI and volume.
Sell (Short): Activated when several conditions are met, including a bearish change of character, a bearish structure break, the price closing below the previous value minus a multiple of the ATR, with additional confirmations from RSI and volume.
Entry and Exit Signals:
Long Entry (Buy): Executed when the buy conditions are met.
Short Entry (Sell): Executed when the sell conditions are met.
Position Close: Positions are closed when the price crosses below (for long positions) or above (for short positions) the 50 EMA.
Historical Highs and Lows Lines:
The script draws lines of historical highs and lows from the last 288 and 60 periods to show key support and resistance levels on the chart.
Signal Table Across Multiple Timeframes:
The script displays a table in the top-right corner of the chart with indicators like the EMA trend, RSI value, and MACD histogram for timeframes of 1 minute, 5 minutes, 30 minutes, 1 hour, 4 hours, daily, and weekly.
Precautions:
Does not guarantee profits: Although the script is designed to detect structure breaks and possible trend changes, it does not guarantee 100% profitable signals. The market is always subject to risk and unpredictable volatility.
Requires adjustments for each asset: Parameters such as ATR length and EMA lengths should be adjusted according to the asset being analyzed and market conditions.
Use of additional confirmations: To reduce false signals, the script uses additional confirmations like RSI and volume, but it is always recommended to perform additional analysis before making trading decisions.
Changing trends: The change of character (CHOCH) can be a useful indicator, but it can give false signals in highly volatile markets or during prolonged consolidations.
Relies on historical data: This script relies on historical data to identify highs and lows. It does not consider fundamental events that may significantly impact the market.
Requires constant monitoring: Although the signals are automated, it is important to monitor open positions and make adjustments if market conditions change.
Risk of false signals: In low liquidity markets or consolidations, structure breaks can be false, so it’s recommended to pay attention to any additional confirmation signals or use a proper risk management strategy.
Imbalance(FVG) DetectorImbalance (FVG) Detector
Overview
The Imbalance (FVG) Detector is a technical analysis tool designed to highlight price inefficiencies by identifying Fair Value Gaps (FVGs). These gaps occur when rapid price movement leaves an area with little to no traded volume, which may later act as a zone of interest. The indicator automatically detects and marks these imbalances on the chart, allowing users to observe historical price behavior more effectively.
Key Features
- Automatic Imbalance Detection: Identifies bullish and bearish imbalances based on a structured three-bar price action model.
- Customizable Sensitivity: Users can adjust the minimum imbalance percentage threshold to tailor detection settings to different assets and market conditions.
- Real-time Visualization: Marked imbalances are displayed as colored boxes directly on the chart.
- Dynamic Box Updates: Imbalance zones extend forward in time until price interacts with them.
- Alert System: Users can set alerts for when new imbalances appear or when price tests an existing imbalance.
How It Works
The indicator identifies market imbalances using a three-bar price structure:
- Bullish Imbalance: Occurs when the high of three bars ago is lower than the low of the previous bar, forming a price gap.
- Bearish Imbalance: Occurs when the low of three bars ago is higher than the high of the previous bar, creating a downward gap.
When an imbalance is detected:
- Green Boxes indicate bullish imbalances.
- Red Boxes indicate bearish imbalances.
- Once price interacts with an imbalance, the box fades to gray, marking it as tested.
! Designed for Crypto Markets
This indicator is particularly useful in crypto markets, where frequent volatility can create price inefficiencies. It provides a structured way to visualize gaps in price movement, helping users analyze historical liquidity areas.
Customization Options
- Min Imbalance Percentage Size: Adjusts the sensitivity of the imbalance detection.
- Alerts: Users can enable alerts to stay notified of new or tested imbalances.
Important Notes
- This indicator is a technical analysis tool and does not provide trading signals or financial advice.
- It does not predict future price movement but highlights historical price inefficiencies.
- Always use this tool alongside other market analysis methods and risk management strategies.
50%er(Miyagi)50%er (Miyagi Version)
The 50%er (Miyagi Version) is a TradingView script that calculates and plots the 50% retracement levels of the previous candle for various timeframes. It includes additional timeframes and profit targets to enhance trading strategies.
Features:
Timeframes:
Daily, Weekly, Monthly, Quarterly, Yearly
12-Hour Candle 50% (for 0-day ETFs/options on Fridays)
6-Hour Candle 50% (for SPX)
690-Minute Candle 50% (for Futures)
Profit Targets (PTs) for each timeframe.
How It Works:
Displays the 50% level of the previous candle for the selected timeframe.
Displays only relevant 50% levels based on the selected timeframe to avoid clutter.
What sets this version of 50%er different from the original is it is modified to plot the 50% level of the 12 hour candle, 6 hour candle (SPX), and 690 candle (Futures), as well as the profit targets for each.
● 12 hour candle 50% (Only for 0Day ETF's and 0day Individuals Option Contracts on Fridays)
● 6 hour candle 50% (Only for SPX)
● 690 minute candle 50% (Only for futures)
● Profit takes for all of those unique timeframes.
For example, IWM below is in a 1-3-1 candle pattern on the 12 hour timeframe.
If the current green candle (after the last 1 candle) stays above the 12hr 50% at market open, then we will look to take shorts to the 1st red PT and possibly beyond.
If the last candle (after the last 1 candle) opens below the 12hr 50% at market open, we will look to go long to the 1st green PT and possibly beyond.
This rule also applies to the 6 hour timeframe for SPX and 690 timeframe for futures.
Must have tradingview's real-time data, as well as premarket or extended hours session enabled!
Visualization:
The 50% retracement levels and profit targets are clearly marked on the chart, offering both clarity and actionable insights for intra-day and longer-term traders alike.
Dip Point Detection[MedAlgo]This powerful indicator is designed to detect high-probability market dips and reversal points, allowing traders to capitalize on quick 3% to 5% gains or more. By analyzing key reversal patterns in real-time, this tool helps you identify optimal entry points at the beginning of new trends.
How It Works
The indicator employs a sophisticated multi-factor approach that combines:
Trend reversal signals (marked by color-coded bars)
Momentum oscillators
Support/resistance levels (shown as dotted horizontal lines)
Fair Value Gap detection (highlighting market inefficiencies)
High/Low identification points (labeled as "HH" and "LL")
Pivot points as key areas of support and resistance
Price action around fair value gaps for confirmation signals
Using advanced algorithms, these signals are weighted and combined to filter out false positives and highlight only the highest probability reversal zones. Green markers indicate potential long entries, while purple areas suggest bearish reversals.
Key Benefits
Catch market bottoms and tops before the majority of traders
Minimize drawdowns by entering at optimal reversal points
Benefit from quick 3-5% moves in trending markets
Receive clear visual alerts when high-probability setups form
Identify fair value gaps where price is likely to return
Utilize pivot points for strategic entry and exit decisions
Works across multiple timeframes and asset classes
Disclaimer
This indicator is provided for informational purposes only and should not be considered financial advice. Past performance is not indicative of future results. The signals generated are based on historical patterns and technical analysis, which may not always predict future market movements accurately. Trading involves substantial risk of loss. Always use proper risk management and consider using this indicator as part of a comprehensive trading strategy rather than as a standalone system. Test thoroughly before using with real capital.
EURUSD Swing High/Low ProjectionBikini Bottom custom projection tool. Aimed to project tops and bottoms. Don't use unless you understand how it works :)
Renko SR VolumeDaily ATR Renko SR Levels with Volume Analysis is a technical indicator that combines Renko-based support/resistance levels with volume analysis. It dynamically calculates Renko boxes using the ATR (Average True Range) of daily data and identifies key price levels. The indicator:
- Uses daily ATR to determine Renko box size.
- Draws support/resistance levels based on Renko price structure.
- Analyzes volume between levels to assess their strength.
- Colors levels based on relative volume activity:
- Red – strongest level (high volume activity).
- Orange – strong level.
- Yellow – moderate level.
- Green – weakest level (low volume activity).
- Detects daily Renko-based trends.
This tool helps traders visualize key price zones with volume confirmation, improving decision-making in trend and range markets.
