Chart Narrator [verticetrading]An analyst that writes. Chart Narrator reads your chart and describes it in plain sentences — no cryptic numbers, no jargon.
◆ WHAT IT DOES
It turns the chart into a written briefing: main trend and whether the higher timeframe agrees, unusual calm or agitation in volatility, the last structural break in plain words, nearest tested support/resistance with distances in %, fresh candlestick patterns, and volume participation. Everything is summarized in a bias header with a conviction score ("BULLISH — 4 of 5 signals point the same way").
◆ HOW IT WORKS
Six evidence modules (trend + higher-timeframe confirmation, volatility ranking, market structure, merged pivot levels weighted by touches, candlestick patterns, volume vs its average) each produce a verdict and the numbers behind it. A narration engine turns them into sentences, stays silent when a module has nothing to say, and detects confluences between modules (e.g. a bullish pattern printed on a tested support) to flag higher-quality situations. With enough history it also adds a day-of-week tendency note with its sample size.
◆ HOW TO USE IT
Add it to any symbol and timeframe. Read the panel top to bottom: bias first, evidence after. Set the "Bias flip" alert to receive the full written analysis when the overall picture changes. Interface in English and Spanish.
◆ WHAT MAKES IT ORIGINAL
Indicators show numbers; this one explains itself. Every sentence cites its evidence, only confirmed bars are narrated (no repainting), and the panel says "mixed, no clear edge" when that is the truth.
◆ LIMITATIONS
It describes the present; it does not predict. Not financial advice.
────────────────────────
ESPAÑOL — El analista que escribe
Convierte el gráfico en un informe escrito: tendencia y si la temporalidad mayor la confirma, calma o agitación inusual de la volatilidad, la última ruptura estructural en palabras llanas, soporte/resistencia más cercanos con distancias en %, patrones de velas recientes y participación del volumen — todo resumido en un sesgo con puntuación de convicción ("ALCISTA — 4 de 5 señales apuntan en la misma dirección"). Seis módulos de evidencia alimentan un motor de redacción que calla cuando no hay nada que decir y detecta confluencias entre señales. Solo narra velas confirmadas (sin repintado). Interfaz en inglés y español. Describe el presente, no predice; no es asesoramiento financiero. Penunjuk
ANDROMEDA MTF - TrendSyncThis script is a Multi-Timeframe (MTF) trend-following system designed to capture pullbacks in direction of the primary trend.
Rather than relying on a single indicator, ANDROMEDA MTF utilizes a specific mashup of Moving Averages, MACD, and RSI to establish a robust rule-based logic. The primary goal of combining these tools is to filter out lower-timeframe market noise and only authorize entries when momentum and structural trend are perfectly aligned on a higher timeframe.
⚙️ CORE MECHANICS (The Mashup Logic):
To avoid false signals during choppy markets, the script requires three distinct conditions to agree on the Higher Timeframe (MTF) before defining a trend:
Baseline Trend Structure: Uses two customizable Moving Averages (EMA or SMA). The fast MA must be above/below the slow MA to indicate directional bias.
Momentum Confirmation (Slope): The algorithm calculates the mathematical slope of the slow MA (MA - MA ). The trend is only validated if the slow MA is actively sloping in the trade direction, preventing entries in flat/consolidating markets.
Volume/Momentum Filter: The MACD Histogram must confirm the bias (Histogram > 0 for longs, < 0 for shorts).
🎯 ENTRY TRIGGERS & VISUAL FILTERS:
The Pullback Trigger: Once the Higher Timeframe establishes a firm trend (Blue for Bullish, Red for Bearish), the script monitors the local timeframe. A Buy/Sell signal is generated exactly when the local price pulls back and crosses the MTF Moving Averages, offering a discounted entry in the direction of the macro trend.
Exhaustion Filter (RSI): A fast RSI operates in the background. It overrides the candle colors (turning them orange by default) to visually warn the trader that the asset has reached overbought/oversold extremes, cautioning against late entries.
🛠️ HOW TO USE:
Apply the indicator to your execution timeframe (e.g., 15m) and set the MTF parameter in the settings to your macro directional timeframe (e.g., 240 for 4H). Wait for the trend lines to turn Blue/Red and enter on the printed signal arrows during pullbacks.
🇧🇷 (PORTUGUÊS)
Este script é um sistema seguidor de tendência Multi-Timeframe (MTF) projetado para capturar pullbacks na direção da tendência primária.
⚙️ COMO FUNCIONA (A Lógica):
Para evitar sinais falsos, o script exige que 3 condições concordem no Tempo Gráfico Maior (MTF) antes de definir a tendência:
Estrutura: Duas médias móveis (EMA/SMA). A rápida deve estar alinhada com a lenta.
Momento (Inclinação): O algoritmo calcula a inclinação matemática da média lenta. A tendência só é validada se a média estiver apontando para a direção da operação.
Filtro MACD: O Histograma do MACD deve confirmar o fluxo (Maior que zero para compras).
🎯 GATILHOS E FILTROS VISUAIS:
Gatilho: Quando o tempo gráfico maior estabelece a tendência (Azul para Alta, Vermelho para Baixa), o script gera o sinal de entrada no momento em que o preço atual faz um pullback e toca as médias móveis do tempo gráfico maior.
Filtro de Exaustão (RSI): Um RSI rápido colore os candles de laranja para avisar visualmente que o ativo chegou a uma zona de sobrecompra/sobrevenda, evitando que você entre muito tarde no movimento.
COMO USAR: Adicione o indicador no seu gráfico de execução (ex: M15) e configure o parâmetro MTF no menu para o seu gráfico de referência (ex: 240 para H4). Aguarde as médias ficarem azuis ou vermelhas e opere os sinais de seta a favor da co Penunjuk
Relative Strength (RS) - Mansfield StyleRelative Strength (RS) measures how a symbol performs against a chosen
benchmark. Instead of plotting the raw price ratio — whose scale differs
from one symbol to another and makes comparison difficult — this script
normalizes the ratio (symbol close / benchmark close) against its own
simple moving average over a configurable lookback "Period". The result
is a zero-centered line that reads the same way on any symbol:
- RS above 0 and rising → the asset is outperforming the benchmark
- RS below 0 and falling → the asset is underperforming
- Zero-line crossings → shifts in relative leadership
Only the direction and the position relative to zero matter, not the
absolute value.
█ HOW IT WORKS
1. The script requests the benchmark's close on the selected timeframe.
2. It computes the raw ratio: symbol close / benchmark close.
3. The ratio is divided by its SMA over the "Period" lookback, minus 1 —
expressing how far the current relative strength stands above or
below its recent average.
4. An optional moving average of RS can be displayed as a signal line.
█ INPUTS
- Comparative Symbol: the benchmark (an index such as SPX, a sector
index, or any peer symbol — e.g. compare gold against silver).
- Period (default 50): normalization lookback. Shorter = more reactive,
longer = smoother and slower.
- Show Moving Average / Moving Average Period: optional smoothing line.
- Timeframe: leave empty to use the chart's timeframe, or select a
higher timeframe for multi-timeframe analysis.
█ HOW TO USE
Apply the indicator to any symbol. When RS holds above zero, the asset
is leading its benchmark — favor it for relative-strength strategies
(buy strength). When RS holds below zero, the asset is lagging — avoid
it or rotate out. Zero-line crossovers flag early changes in relative
leadership, and two built-in alerts fire on these crossings.
RS is a relative tool, not a timing tool: an asset can outperform a
falling benchmark while still declining in absolute terms. Combine it
with your own trend or entry criteria.
█ CREDITS
The normalization method follows the Mansfield Relative Strength
concept popularized by Stan Weinstein in "Secrets for Profiting in
Bull and Bear Markets".
█ NOTE ON HIGHER TIMEFRAMES
When a higher timeframe is selected in the Timeframe input, the value
of the current forming bar updates until that bar closes. Historical
values do not repaint. Penunjuk
Elaris Trend LifecycleElaris Trend Lifecycle
Overview
Elaris Trend Lifecycle is a trend analysis indicator designed to help traders identify different phases of a market trend using a combination of trend structure, momentum, volatility, and price behavior.
Instead of treating every trend equally, the indicator classifies the current market into distinct lifecycle stages, allowing traders to better understand whether a trend is just beginning, gaining strength, becoming extended, or showing signs of weakening.
The goal is to provide additional context that can assist with trade planning, trend-following strategies, and risk management across different markets and timeframes.
---
Lifecycle Phases
• Neutral
No clear directional trend is currently detected.
• Birth
A new bullish or bearish trend is beginning to develop based on moving average alignment and improving momentum.
• Expansion
The trend is strengthening with increasing directional momentum and supportive volatility conditions.
• Maturity
The trend remains intact but has progressed for an extended period or has moved significantly away from its average price.
• Exhaustion
Price begins showing characteristics that may indicate slowing momentum, including extended movement and rejection wicks.
• Reversal Risk
Trend conditions have weakened and structural changes suggest that the probability of continuation has decreased.
---
Features
• Multi-stage trend classification
• EMA-based trend engine
• Trend duration tracking
• Momentum evaluation using ADX
• ATR-based volatility expansion analysis
• RSI-assisted exhaustion detection
• Optional confirmed swing structure validation
• Trend lifecycle dashboard
• Dynamic bar coloring
• Background phase visualization
• Bullish and bearish lifecycle signals
• Configurable alerts
• Fully customizable inputs
---
Dashboard
The integrated dashboard displays:
• Current lifecycle phase
• Trend direction
• Lifecycle score
• Bars spent in the current trend
• ADX strength
• ATR expansion status
The dashboard supports both dark and light themes.
---
Alerts
Alert conditions are available for:
• Trend Birth
• Expansion Phase
• Exhaustion Phase
• Reversal Risk
These alerts can be used for notifications or automated workflows.
---
How It Can Be Used
Some examples include:
• Identifying developing trends
• Monitoring trend strength
• Recognizing extended market conditions
• Adding confirmation to trend-following strategies
• Supporting discretionary market analysis
As with any technical indicator, it is intended to be used alongside a broader trading plan and appropriate risk management.
---
Notes
• Signals are generated using confirmed bar data.
• Swing structure confirmation uses confirmed pivots, which naturally require additional bars before confirmation.
• The indicator is designed as an analytical tool and does not predict future market behavior or guarantee trading outcomes.
Penunjuk
Adaptive Consensus Trail Structure, Regime & SelfAdaptive Consensus Trail — Structure, Regime & Self-Test
A trailing stop that sits on the agreement of several structural references, adapts to the market regime, and forward-tests its own signals so the numbers it shows are measured, not asserted.
What it is
Most trailing stops follow one idea — an ATR band, a SuperTrend, a moving average. This one places the stop where a small committee of independent structural references agree, reads how confident that agreement is, widens or tightens itself according to the market regime, and then continuously audits its own flips and reports the edge it actually produced on your data.
The committee has five members, each locating support/resistance from a different lens:
Anchored VWAP band — fair value for the session/week/month
Session / naked volume Point-of-Control — the price the most volume traded at, carried forward until revisited
Fair-Value-Gap midpoint — unfilled imbalance
Swing pivot — structural memory
Order-flow absorption — where aggressive buying/selling was absorbed (via Bulk Volume Classification)
Why these parts belong in one script (mashup justification)
Each reference alone whipsaws on an index, and each is right in different conditions. They are combined because they correct one another, and the entire value of the script is in that interaction — not in any single line:
A reliability layer scores every reference's historical respect rate with a Wilson lower bound, so a reference that keeps getting ignored loses its vote instead of dragging the stop around.
A consensus layer keeps only the densest agreeing cluster of references, so the stop sits on genuine agreement rather than on an average nobody respects, and far-apart references never force a permanent "no signal."
A regime layer (efficiency ratio + ADX + band-width + a volatility-cluster read + a Hurst persistence estimate) widens the band and tightens the flip confirmation in chop — this is what removes the whipsaw.
A self-test layer forward-scores every flip and recalibrates the confidence number so it means what it says.
Split apart, these are five overlays that each mislead in a range. Wired together, they are one self-correcting, self-auditing trail. That is the reason for combining them.
How it works (six layers)
References are computed on the bar close.
Reliability — rolling-capped respect counts per reference give a Wilson lower-bound "trust." POC is a magnet, so it is judged by forward reaction (did price reject away before breaking through?), not a same-bar close, which keeps its trust honest.
Consensus — the densest agreeing cluster within an ATR band becomes the trail's target; the envelope and confidence are measured on that cluster only.
Adaptive backbone — an efficiency-ratio / regime-adaptive band (Adaptive, Chandelier, or Blend) that widens in chop.
The trail — high confidence pulls the stop toward structure (floored a minimum ATR off price); low confidence rides the wide band, so it flips less in noise.
Self-test — every flip is forward-resolved by triple-barrier first-touch against an unconditional base rate, split by strength tier and by regime, with a walk-forward in-sample→out-of-sample check, a runs test of independence, a Brier score, and a confidence recalibration.
How to use it
Read the top banner for the one-line bias — BULLISH / BEARISH / WAIT — and the READ legend for what to do. The coloured line is your stop: support in an uptrend, resistance in a downtrend. BUY / SELL labels print only on confirmed, sufficiently-confident, higher-timeframe-aligned flips.
The dashboard gives detail top-down: each reference's level and trust, the consensus, raw → calibrated confidence, regime (with Hurst and ADX), the higher-timeframe invalidation stop, and a FULL / HALF / STAND-ASIDE suggestion.
Before sizing, open the Self-Test panel and read the Edge column (hit% − base%), not the raw hit-rate. A ★ means the edge's confidence interval clears the base rate. Prefer signals where the walk-forward change isn't badly negative and the runs test isn't "streaky." Being honest about it: on many indices this tool shows real edge in range and volatile regimes on higher timeframes and little-to-none on very low timeframes or once a trend is already confirmed — the panel makes that transparent so you can pick your spots.
Works on any market
Set the Price source, and for symbols with no native volume set a Borrow-volume proxy (e.g. a futures contract). The panel theme adapts to your chart background automatically. Backbone: Adaptive / Chandelier / Blend. Absorption: order-flow (BVC) or simple. An optional intrabar resolution builds a finer volume profile where available.
Originality
The committee-of-references design, the cluster-not-average consensus, the reliability weighting that lets references lose their vote, the forward-reaction POC respect test, and the confidence self-calibration are the author's own work. The underlying techniques are standard and fully credited below.
Non-repaint
References, regime, consensus and the trail all evaluate on the close of the bar; the live bar is provisional and settles on close. Self-test events are logged and resolved only on confirmed bars and resolve on bars after their trigger at fixed barriers, so hit / base / edge use no look-ahead. The higher-timeframe stop uses a lookahead-off request.
Concept credits
Wilson score interval (E. B. Wilson); efficiency ratio (P. Kaufman); ADX / DMI / ATR / volatility-stop lineage (J. W. Wilder); anchored VWAP (industry standard); volume profile / value area / point-of-control — Market Profile (J. P. Steidlmayer, developed by J. F. Dalton); triple-barrier first-touch labelling (M. López de Prado); runs test of randomness (A. Wald & J. Wolfowitz); rescaled-range / Hurst exponent (H. E. Hurst); Brier score (G. W. Brier); Bulk Volume Classification / VPIN (D. Easley, M. López de Prado & M. O'Hara); reliability-bin (isotonic-style) calibration is standard forecasting practice.
Limitations & disclaimer
"Absorption" is a volume proxy — base data has no true tick order flow, so the buy/sell split is estimated from bar moves, not measured. Confidence is context, not a promise of profit. The self-test is descriptive of past behaviour on the loaded symbol (fixed barriers, no costs or slippage) — a study aid, not a backtest and not a guarantee. A measured edge is what flips did historically here, not a forecast.
This script is for research and education only. It is not financial advice, not a recommendation to buy or sell, and not a guarantee of any outcome. Trading carries risk of loss; your decisions are your own. Test on your own data and use independent risk management before relying on it. Penunjuk
Keltner Channel ATR StretchKeltner Channel ATR Stretch is a Keltner Channel variant designed to show trend bias, price stretch, and volatility width in one compact view.
The script uses an EMA basis with ATR-scaled upper and lower bands. In addition to the channel itself, it normalizes the selected Source's distance from the EMA basis as Stretch, normalizes the EMA basis slope in ATR units as Bias, and ranks the current channel width against its recent min-max range as Width Rank.
The goal is not to create trade signals. The goal is to make the current chart state easier to read: whether price is inside the channel, moving with a trend bias, pulling back toward the basis, stretching beyond the outer band, reaching an extreme band, or returning inside the channel after an outside move.
Dashboard reading:
Bias shows the EMA basis direction normalized by ATR:
Bullish, Bearish, or Neutral.
Position shows where the selected Source is relative to the channel:
Trend Zone, Pullback, Upper Stretch, Lower Stretch, Extreme, or Inside.
Volatility shows the current channel width regime:
Quiet, Normal, or Expanded.
Stretch shows the distance from the EMA basis in outer-channel units.
A value near +1 means price is near the upper outer band.
A value near -1 means price is near the lower outer band.
Slope shows the EMA basis slope in ATR units.
Width Rank shows the current channel width relative to its recent min-max range.
It is a simple 0-100 rank of the current width inside its own recent range, not a statistical percentile.
How it works:
The basis is an EMA of the selected Source.
The outer bands are calculated as:
Basis plus or minus ATR multiplied by the ATR Multiplier.
The inner bands are a fractional zone inside the outer channel.
The optional extreme bands are a wider reference zone outside the outer channel.
Stretch is calculated as:
Source minus Basis, divided by the outer channel half-width.
Slope is calculated as:
Current EMA basis minus the basis from the selected lookback, divided by ATR.
Width Rank compares the current channel width to the lowest and highest channel width over the selected Width Rank Lookback.
Markers and alerts:
Upper stretch and lower stretch mark movement beyond the outer bands.
Upper extreme and lower extreme mark movement beyond the optional extreme band level.
Upper return inside and lower return inside mark when the selected Source moves back inside the outer channel after being outside it.
Trend bias changed marks a change in the ATR-normalized EMA basis direction.
Width regime changed marks a change between Quiet, Normal, and Expanded width states.
The Confirmed bars only setting is enabled by default. When it is enabled, markers and alerts evaluate only on closed bars. The dashboard reflects the current chart state, including the still-forming bar.
This is not a trading system. It is a visual analysis tool for reading channel position, trend bias, and volatility context. It does not provide trade instructions, entries, exits, or performance claims.
Limitations:
Keltner Channels are volatility-based bands and can expand or contract as ATR changes.
A stretch beyond a band does not necessarily mean price must reverse.
A quiet width regime does not guarantee expansion.
A bullish or bearish bias does not predict future direction.
Use this tool together with your own market context and risk management.
No financial advice.
This open-source script was written from scratch using Pine Script built-ins. No third-party Pine code was reused.
日本語補足:
Keltner Channel ATR Stretch は、EMAを中心にATR幅のチャネルを表示しながら、価格の伸び、EMAの傾き、チャネル幅の状態を同時に確認するためのインジケーターです。
右上のDashboardでは、Bias、Position、Volatilityを中心に、現在のチャート状態をすばやく確認できます。
Bias はATRで正規化したEMAの傾きです。
Position は価格がチャネル内、トレンドゾーン、押し目、上方向または下方向の伸び、極端な伸びのどこにあるかを示します。
Volatility はチャネル幅がQuiet、Normal、Expandedのどの状態にあるかを示します。
このスクリプトは売買システムではありません。
BUY/SELL、エントリー、利確、損切りを指示するものではなく、トレンド・行き過ぎ・ボラティリティの状態を読みやすくするための視覚補助ツールです。 Penunjuk
Penunjuk
Elaris Auto Trend Fibonacci ProElaris Auto Trend Fibonacci Pro
Overview
Elaris Auto Trend Fibonacci Pro is an advanced market structure and Fibonacci analysis tool designed to automatically identify directional trends, detect significant swing points, and project professional-grade Fibonacci retracement and extension levels directly on the chart.
Unlike manual Fibonacci drawing tools that require traders to constantly adjust anchor points, this indicator continuously analyzes confirmed swing structure and automatically maps the most relevant Fibonacci framework based on the current market trend.
The goal is to help traders quickly identify potential pullback zones, trend continuation areas, profit targets, and key reaction levels without manually redrawing Fibonacci levels throughout the trading session.
---
How The Indicator Works
1. Swing Structure Detection
The indicator first identifies confirmed swing highs and swing lows using a configurable pivot confirmation algorithm.
A swing is only considered valid after confirmation, which helps eliminate many false or premature swing points that often appear during volatile market conditions.
The minimum swing size can also be filtered using ATR-based validation, ensuring that insignificant market fluctuations are ignored.
---
2. Trend Identification
After detecting valid market structure, the indicator determines the dominant directional trend.
Bullish trends are identified when recent confirmed swing lows lead into higher confirmed swing highs.
Bearish trends are identified when recent confirmed swing highs lead into lower confirmed swing lows.
An optional EMA trend filter can be enabled to require alignment between price structure and moving average direction.
This additional layer helps reduce counter-trend Fibonacci projections.
---
3. Automatic Fibonacci Mapping
Once a valid trend is detected, Fibonacci levels are automatically projected between the most relevant confirmed swing points.
The indicator plots:
• 0.236 Retracement
• 0.382 Retracement
• 0.500 Midpoint
• 0.618 Golden Ratio
• 0.786 Deep Retracement
• 1.000 Retracement
These levels represent areas where pullbacks, reactions, trend continuations, or reversals may occur.
---
4. Golden Zone Highlighting
The area between the 50% and 61.8% retracement levels is automatically highlighted as the Golden Zone.
Many traders monitor this region because it often represents an area where institutional participants may re-enter an existing trend after a pullback.
The highlighted zone provides a quick visual reference for potential trend continuation opportunities.
---
5. Extension Targets
The indicator can optionally project Fibonacci extension levels beyond the current trend.
Available extension targets include:
• 1.272 Extension
• 1.618 Extension
• 2.000 Extension
These levels can be used as potential profit-taking areas, trend continuation objectives, or future reaction zones.
---
6. Trend Dashboard
A built-in dashboard provides real-time information including:
• Current trend direction
• Swing strength relative to ATR
• Fibonacci anchor direction
• Golden zone status
• Indicator operating mode
The dashboard helps traders evaluate current market conditions without needing additional analysis tools.
---
How To Use
Trend Continuation
1. Wait for a confirmed bullish or bearish trend.
2. Allow price to retrace toward the highlighted Fibonacci levels.
3. Monitor the Golden Zone for potential continuation setups.
4. Use extension levels as potential target areas.
Pullback Analysis
The 38.2%, 50%, and 61.8% retracement levels can help identify areas where temporary corrections may end and the primary trend may resume.
Target Projection
The Fibonacci extensions can be used to estimate possible future trend objectives after a successful continuation move.
---
Important Notes
• The indicator uses confirmed swing points and does not rely on future-looking calculations after confirmation.
• Fibonacci levels automatically update when a new confirmed market structure is established.
• The indicator is designed for trending markets and may generate fewer meaningful projections during prolonged ranging conditions.
• This tool is intended for technical analysis and should not be used as a standalone trading system.
---
Best Markets
The indicator can be applied to:
• Cryptocurrency Markets
• Forex Markets
• Stock Markets
• Index Markets
• Commodity Markets
It is particularly effective on higher liquidity instruments where market structure tends to be more consistent.
---
Best Timeframes
Recommended timeframes:
• 15 Minutes
• 1 Hour
• 4 Hours
• Daily
Higher timeframes generally produce more reliable market structure and Fibonacci projections.
---
Alerts
The indicator includes alerts for:
• Trend direction changes
• Golden Zone interactions
• Key Fibonacci level breaks
These alerts can be integrated into trading workflows for additional monitoring and confirmation.
---
Thank you for using Elaris Auto Trend Fibonacci Pro.
Penunjuk
Ribbon Conviction SystemRibbon Conviction System — Trend, Flow, Value and Adaptive Stop
Overview
This is a single decision-support system for intraday traders. It answers three questions on one chart: which way is the trend, how much conviction is behind the current move, and where a logical trailing stop sits. A moving-average ribbon defines direction, a conviction score from 0 to 100% grades every signal, and an adaptive volatility stop marks risk. The components are designed to work together as one filtered signal, not as a loose collection of separate indicators.
Why these components are combined
A moving-average crossover on its own fires constantly in sideways markets and gives no sense of whether a cross is meaningful. Each part added here exists to fix a specific weakness of the part before it, so the result is one filtered signal rather than several indicators stacked on a chart.
Ribbon (direction). Five Fibonacci-length averages — 8, 13, 21, 34, 55 — using a mix of Hull, EMA and Kaufman Adaptive Moving Average (KAMA). The KAMA anchors deliberately flatten in choppy conditions, so the ribbon stops giving direction when there is no trend. Weakness it leaves open: a crossover can still fire on a weak, low-conviction move.
Conviction score (filter). Instead of taking every crossover, each signal is graded 0–100% by blending four independent readings of the same bar, chosen because they measure different things rather than repeat each other:
Buy/sell flow — net buying versus selling pressure, inferred from lower-timeframe price-and-volume behaviour.
Effort vs move — how far price travelled for the volume spent; absorption and churn are penalised.
Trend quality — Kaufman Efficiency Ratio: directional travel divided by total path, separating trend from noise.
Price location — is price on the right side of value? Blends session VWAP slope, a swing-anchored VWAP, the session volume-profile value area (VAH/VAL/POC), and the prior session's VWAP and unfilled POC.
A flow-toxicity proxy (VPIN-style) then lowers the score when flow looks one-sided and unstable. Weakness it leaves open: all four readings come from the chart timeframe, so they can agree for the wrong reason.
Higher-timeframe agreement (independent confirmation). The same volatility-stop direction is computed on 3×, 5× and 15× the chart timeframe and folded in as a multiplier, not a fifth blended input. It is kept separate precisely because it is the one genuinely independent check on the chart-timeframe score: full agreement raises conviction, disagreement lowers it.
Adaptive volatility stop (risk). A Chande-style volatility stop whose ATR period and multiplier adapt through the Efficiency Ratio, so the stop tightens in clean trends and widens in chop. This turns the tool from "where is the signal" into "where is my risk if I take it."
How they work together
Direction (ribbon) decides the side. The conviction score decides whether a crossover on that side is worth showing and how strongly. Higher-timeframe agreement scales that conviction up or down. The adaptive stop shows the exit reference. Every signal is the product of all four stages working in sequence.
What it plots
The five-average ribbon with shaded bands; the 55 line is the bold trend-reference band.
Signal badges at qualifying crossovers, labelled with the band crossed and the conviction percent (for example "21 65%").
Optional value references: session VWAP, swing-anchored VWAP with bands, volume-profile VAH/VAL/POC, and the prior session's VWAP and POC.
The adaptive volatility stop as a step line with a live distance label.
A compact dashboard summarising trend, conviction and each component, higher-timeframe agreement, the stop, and the data mode.
A small higher-timeframe agreement ribbon.
How to use
Add it to an intraday chart. The defaults suit index futures, but direction works on any symbol.
Spot vs futures: many spot indices publish no real volume, which the flow, value-area and toxicity parts depend on. Under "Data source" the script auto-detects this and switches the volume-based parts to a time-at-price method so everything still works; you can also set the mode manually. The dashboard "Data" row shows which mode is active.
Trade in the ribbon's direction. Prefer signals with a higher conviction percent and higher-timeframe agreement, and treat low-conviction crosses as noise. Use "Hide signals weaker than" to suppress them.
Use the adaptive stop as a trailing-risk reference, sized to your own plan.
The "Look & size" group controls signal size, dashboard size and position, a "Minimal" preset (ribbon + signals + stop only), and band lightness.
Originality
The individual techniques — adaptive moving averages, the Efficiency Ratio, effort-versus-result, VWAP, volume profile and volatility stops — are publicly documented. What is original here is the integration: a single conviction score that fuses chart-timeframe flow, effort, efficiency and value, damps it by flow toxicity, and scales it by independent higher-timeframe agreement, then gates an adaptive-stop-aware signal on that score. The components were selected so each covers a distinct weakness, and redundant filters were deliberately left out to keep one clear signal.
Credits
Perry Kaufman — Adaptive Moving Average and Efficiency Ratio. Tushar Chande — Volatility Stop concept. The effort-versus-result component is an original, compact reimplementation inspired by the publicly described effort-versus-result method from the volume-spread-analysis lineage.
Disclaimer
This script is for education and information only. It is not financial, investment or trading advice and does not guarantee any outcome. Signals describe current conditions; they do not predict the future. Markets carry substantial risk of loss. Volume-based readings depend on the data feed and are unreliable on instruments without real volume. Always test on your own market and timeframe, and manage risk with your own stops and position sizing. The author is not a licensed financial advisor; consult a qualified professional before making financial decisions. You are solely responsible for your own trading decisions. Penunjuk
Heikin Ashi Cloud Overlay | Rainbow MatrixGENERAL OVERVIEW
The Heikin Ashi Cloud Overlay renders a Heikin Ashi cloud directly on top of traditional candlesticks, giving traders both views in a single chart. HA candles smooth macro trend perception by filtering individual-bar noise, but they sacrifice entry-bar precision because each HA candle does not represent the actual price range traded on that bar. This script preserves both signals simultaneously: the HA cloud surfaces directional context, while the underlying real candles preserve precise execution-bar timing.
A compact corner HUD reports current HA direction, consecutive streak length, and body-size anomalies relative to a 20-bar rolling average — useful for monitoring momentum exhaustion and impulsive expansion in real time without analyzing the cloud manually.
The script adds a visual intelligence layer on top of the standard HA pattern: cloud fill opacity dynamically reflects body intensity (impulsive bars render densely opaque, normal bars render lightly), and small colored dots flag body anomalies (current body > 3× rolling average) directly on the chart.
WHAT IS THE THEORY BEHIND THIS INDICATOR?
Heikin Ashi candles are derived from traditional OHLC via a recursive smoothing formula introduced by Munehisa Homma in 18th-century Japanese rice trading and popularized in modern Western technical analysis through the work of Dan Valcu and others. The transformation produces candles that emphasize trend persistence over discrete price action: consecutive same-color HA candles indicate ongoing directional pressure, while doji-like HA candles or sudden color flips often signal pivots.
The trade-off is well-known: HA candles do not show real OHLC. The haOpen of each candle is the average of the previous haOpen and haClose, not the actual session open. This makes HA excellent for trend reading but unreliable for entry timing — orders need to reference the actual price range of the bar, not the smoothed projection.
The conventional solutions are either to switch back and forth between HA and regular candle views (cognitive overhead), or to use HA as the primary chart and lose precision on entries (execution cost). This indicator takes a third approach: render the HA candles as a transparent overlay envelope on top of the standard candlesticks. The trader sees both at once. The HA envelope communicates trend context; the underlying candles preserve real-bar precision.
The state machine layered on top — direction tracking, streak counting, and body-size anomaly detection against a rolling average — converts the visual cloud into a numerical readout, surfacing exhaustion and impulsive moves that might be missed at a glance.
HA CLOUD OVERLAY FEATURES
The indicator includes 5 main components:
Heikin Ashi Cloud Overlay
Body Intensity Modulation (dynamic opacity)
Body Anomaly Visual Markers
HA State HUD Panel
Three Optional Alerts
HEIKIN ASHI CLOUD OVERLAY
🔹 What It Does
For each bar on the chart, the indicator computes the four Heikin Ashi values (haOpen, haClose, haHigh, haLow) using Pine Script's canonical recursive formula. It then renders a thin envelope between haHigh and haLow with semi-transparent fill, plotted on top of the underlying traditional candles.
🔹 Method
The computation follows the standard HA definition:
◇ haClose = (open + high + low + close) / 4
◇ haOpen = average of the previous haOpen and the previous haClose (recursive)
◇ haHigh = max of (high, haOpen, haClose)
◇ haLow = min of (low, haOpen, haClose)
A `var float ha_open = na` seed pattern handles the first-bar initialization safely, avoiding NA propagation that would corrupt the recursive chain.
🔹 Visual Behavior
The envelope is rendered as a thin top-bottom band with translucent fill. The fill color reflects the HA direction: bullish (haClose ≥ haOpen) renders in the configured bull color (TradingView native teal by default); bearish (haClose < haOpen) renders in the bear color (TradingView native red by default). An optional midline (dotted) at the (haOpen + haClose) / 2 level can be toggled for traders who prefer an explicit midpoint reference.
BODY INTENSITY MODULATION
🔹 What It Does
The cloud fill transparency is dynamically modulated based on the current HA body size relative to the 20-bar rolling average. Bars with above-average body push the fill toward more opaque, surfacing impulsive expansion clusters visually without requiring HUD analysis.
🔹 Tier Logic
◇ Body < 1× average: standard transparency (user-configured slider value)
◇ Body 1-2× average: −10 transparency (notable bar — slightly more opaque)
◇ Body 2-3× average: −30 transparency (strong bar — clearly more opaque)
◇ Body ≥ 3× average: −50 transparency, floor 20 (anomaly — densely opaque)
The floor cap of 20 prevents the fill from becoming so opaque that the underlying candle wicks become unreadable, preserving the dual-view principle of the indicator.
🔹 Why It Helps
Body intensity modulation converts the cloud from a static color band into a momentum-aware visualization. During quiet conditions, the cloud whispers; during impulsive expansion or capitulation phases, the cloud intensifies visually. Traders monitoring multiple charts can identify regime changes peripherally without focusing on any single chart's HUD.
🔹 Toggle
The feature is enabled by default and can be disabled via the "Body Intensity Cloud Opacity" input in the HA CLOUD group, which restores fixed transparency from the slider.
BODY ANOMALY VISUAL MARKERS
🔹 What It Does
A small colored dot appears on the chart whenever the current HA body exceeds 3× the 20-bar rolling average. Bull anomalies render as a dot below the bar (location.belowbar); bear anomalies render as a dot above the bar (location.abovebar). Dot colors match the configured bull/bear palette.
🔹 Why It Helps
The markers convert the alert-only body anomaly detection into a persistent visual signal that remains visible on chart history. Traders reviewing past price action can identify impulsive expansion or capitulation events at a glance, without scrolling through alert history or replaying bars.
🔹 Independent of the Alert
The visual markers and the body anomaly alert are independently toggleable. Traders can show the markers without enabling the alert (visual-only mode) or enable the alert without showing the markers (sound/notification-only mode).
🔹 Toggle
Enabled by default via the "Show Body Anomaly Markers" input in the HA CLOUD group.
HA STATE HUD PANEL
🔹 What It Shows
A compact 4-row corner panel reports three live values:
◇ Direction — current HA candle direction (Bull / Bear), color-coded
◇ Streak — consecutive same-direction count (in current locale, e.g., "7 velas (candles)" in PT)
◇ Avg Body — the average HA body size over the last 20 bars, expressed as a percentage of price
🔹 Why It Helps
The HUD converts the cloud into a numerical readout. Instead of visually estimating streak length or body proportion, traders can read the exact values on each bar. This is particularly useful for traders monitoring multiple charts or running automated rules where consecutive-bar conditions need to be tracked precisely.
🔹 Customization
The HUD can be positioned in any of the four chart corners and rendered in any of five font sizes. The Direction row uses contrasting colors (bull vs bear) for immediate parsing.
THREE OPTIONAL ALERTS
🔹 Alert Types
Each alert is independently toggleable in the indicator settings:
◇ HA Direction Change — fires on the close of a confirmed bar when the HA direction flips (bull→bear or bear→bull). Useful as a confirmation filter on top of other entry signals.
◇ HA Streak Exhaustion — fires when the absolute streak length crosses a user-configurable threshold (default 7). Long consecutive streaks often precede mean-reversion phases, especially in ranging markets.
◇ HA Body Anomaly — fires when the current HA body exceeds 3× the 20-bar rolling average. Anomalous body sizes typically signal impulsive expansion, capitulation, or news-driven moves worth investigating.
🔹 Firing Mechanism
All alerts are gated by `barstate.isconfirmed`, which means they only trigger on the close of the bar that satisfies the condition — never intra-bar. This prevents false signals from intrabar fluctuations that get rejected before close. Each alert uses `alert.freq_once_per_bar` to avoid duplicate firings on the same candle.
🔹 alertcondition() Mode
A dummy `alertcondition` titled "HOW TO SETUP ALERTS (READ)" is exposed at the bottom of the script. It provides setup guidance via its message field, instructing users to select "Any alert() function call" in the TradingView alert condition menu and filter individual alerts via the indicator settings.
MULTILINGUAL INTERFACE
The indicator supports five languages for the HUD display and alert messages: English (default), Português, Español, Русский, and 中文 (Chinese). Code, comments, and configuration tooltips remain in English regardless of the selected language.
For reference, examples of multilingual UI strings used in the HUD:
◇ Direction labels: "Direction:" / "Direção:" / "Dirección:" / "Направление:" / "方向:"
◇ Direction text: "🟢 BULL"/"🔴 BEAR" / "🟢 ALTA"/"🔴 BAIXA" / "🟢 ALCISTA"/"🔴 BAJISTA" / "🟢 БЫЧИЙ"/"🔴 МЕДВЕЖИЙ" / "🟢 多头"/"🔴 空头"
◇ Streak units use a bilingual pattern: "candles" stays in English as a universal technical term; native terms appear in parentheses where the local equivalent is well-established (e.g., "7 velas (candles)").
CUSTOM PALETTE TOGGLE
🔹 What It Does
By default, the indicator uses native TradingView teal/red colors for visual familiarity. A "Use Custom Cloud Colors" toggle in the settings switches to user-configurable bull/bear colors, useful for traders who want to align the cloud palette with their personal indicator stack or color preferences.
HOW TO USE
This indicator is a visualization tool, not a signal generator. It surfaces three categories of structural information: HA direction (smoothed trend context), streak length (momentum persistence), and body anomalies (impulsive moves).
🔹 Reading the Cloud
◇ Bull cloud (default teal) = current HA candle is bullish (haClose ≥ haOpen).
◇ Bear cloud (default red) = current HA candle is bearish (haClose < haOpen).
◇ A long sequence of same-color HA candles indicates strong directional pressure; mixed colors or doji-like HA candles indicate consolidation or pivot zones.
◇ Cloud density (opacity): denser fills mark bars with above-average body — pay attention to these zones, they often correspond to ignition or capitulation phases.
◇ Anomaly dots: when a dot appears below a bull bar or above a bear bar, the bar's body is 3× the recent average — exceptional impulse worth contextualizing against your other signals.
🔹 Reading the HUD
◇ Direction row: parse the current HA candle's directional state at a glance.
◇ Streak row: |streak| ≥ 7 → trend is mature, increasing probability of mean reversion or pullback. Streak just flipped sign → fresh direction.
◇ Avg Body row: current bar body > 3× this value → impulsive expansion or capitulation, worth investigating contextually.
🔹 Tactical Reading
◇ HA color flip + confirmation on the underlying candle: potential trend reversal or pullback entry.
◇ HA streak crosses the exhaustion threshold while price approaches a key level (from another indicator or manual S/R): increased probability of structural reaction.
◇ Body anomaly during otherwise quiet conditions: impulsive move (often news-driven or stop-cascade) — trade with reduced size or wait for retest.
◇ Cluster of dense-opacity bars: regime change or ongoing impulsive move — momentum is structurally elevated.
🔹 Multi-Indicator Workflow
The HA Cloud Overlay is designed to layer cleanly with other indicators. It does not add lines or boxes that compete visually with structural indicators (VWAP, Volume Profile, S/R). The cloud sits behind the candles, the markers are minimal dots, and the HUD sits in a corner — total chart footprint is minimal.
INPUTS EXPLAINED
🔹 System Language
Display language for the HUD and alert messages. Options: English (default), Português, Español, Русский, 中文.
🔹 Show Cloud Envelope
Master toggle for the HA top-bottom envelope and fill.
🔹 Cloud Fill Transparency
Base alpha of the cloud fill (60 = denser, 95 = barely visible). Floor of 60 keeps candle wicks readable. Default 80. When Body Intensity Modulation is ON, this value is the baseline; bars with above-average body intensity become progressively more opaque from this baseline.
🔹 Show HA Midline (dots)
Optional thin dotted line at (haOpen + haClose) / 2.
🔹 Use Custom Cloud Colors
OFF: native TradingView teal/red. ON: apply custom bull/bear colors below.
🔹 Custom Bull Color / Custom Bear Color
Used when "Use Custom Cloud Colors" is ON.
🔹 Body Intensity Cloud Opacity
When ON: cloud fill becomes progressively more opaque on bars with above-average body size. When OFF: cloud uses fixed transparency from the slider above. Recommended ON.
🔹 Show Body Anomaly Markers
When ON: small colored dots appear on bars whose body exceeds 3× the 20-period average. Independent of the body anomaly alert.
🔹 Show HA State HUD
Toggle for the corner HUD reporting Direction / Streak / Avg Body.
🔹 HUD Position
Top Right (default), Top Left, Bottom Right, Bottom Left.
🔹 Font Size
Tiny, Small (default), Normal, Large, Huge.
🔹 Streak Warning Threshold
Streak length at which the Streak Exhaustion alert fires. Range 3–30, default 7.
🔹 Alert: HA Direction Change / HA Streak Extreme / HA Body Anomaly
Independent toggles for each of the three alert types.
IMPORTANT NOTES
The Heikin Ashi Cloud Overlay works on any timeframe and any instrument. The HA computation is timeframe-agnostic — it transforms whatever OHLC data the chart provides.
Alerts fire once per confirmed bar. Historical bars never repaint after they close. The live bar updates intra-bar as expected for a real-time indicator, but alerts will only fire after the bar closes. Body anomaly visual markers can update intra-bar (preview behavior) and settle on close.
The body anomaly threshold (3× rolling average) and streak warning threshold (default 7) are derived from empirical observation across common timeframes and instruments. Both are user-configurable and should be tuned to the trader's instrument and timeframe — high-volatility crypto on 1m may warrant a higher anomaly multiplier than large-cap equities on Daily.
The 20-bar body rolling average uses `ta.sma` of the percentage-based body size. The first 20 bars after script start will show partial values; once enough history is available, the value stabilizes.
The body intensity modulation tier floors (50, 30, 20) are calibrated to preserve candle wick readability even on extreme anomaly bars — the floor 20 ensures the cloud never becomes fully opaque.
Pine Script v6. Open-source under Mozilla Public License 2.0.
UNIQUENESS
The Heikin Ashi Cloud Overlay differs from the standard TradingView Heikin Ashi chart type and from other HA-based indicators in four structural ways.
First, it preserves both views simultaneously rather than replacing one with the other. Standard HA chart mode hides the real candles entirely; this overlay keeps the underlying candles visible at all times, giving traders smoothed trend context (the cloud) and precise entry-bar timing (the underlying candles) in the same visual without context-switching cost.
Second, the cloud fill opacity is dynamically modulated by body intensity relative to a 20-bar rolling average. Standard HA cloud indicators render fills with a single static transparency; this script renders impulsive bars (≥1×, ≥2×, ≥3× average body) with progressively more opaque fills, transforming the cloud from a static visualization into a momentum-aware density map. Capitulation, ignition, and impulsive expansion phases become visually identifiable peripheral signals.
Third, it adds an explicit state machine layer over the raw HA visualization. Direction tracking, consecutive streak counting, 20-bar rolling body-size anomaly detection, and on-chart visual anomaly markers convert the visual cloud into a numerical readout reported live on a corner HUD. This converts subjective visual estimation (is this a long streak? is this body unusually large?) into deterministic measurements with configurable thresholds and a persistent visual record on the chart history.
Fourth, it exposes three independently-toggleable alerts (direction change, streak exhaustion, body anomaly) gated by bar confirmation, making the indicator usable as a confirmation filter or trigger source in automated workflows. Most HA-based indicators are visualization-only or expose a single direction-flip alert; the multi-condition alert set here is designed for traders building structured rules around HA state rather than just observing it.
The combination of dual-view preservation, body-intensity opacity modulation, state machine readout, visual anomaly markers, and multilingual UI produces a single overlay that combines the readability of Heikin Ashi smoothing with the precision of real candles, the rigor of a deterministic state readout, and the visual intuition of a density-aware momentum map. Penunjuk
Relative Strength Pullback Map [AGPro Series]Relative Strength Pullback Map
🧠 Core Idea
Is the pullback happening while the asset remains a relative leader against its benchmark?
📌 Overview / What it does
Relative Strength Pullback Map is a benchmark-relative price-action tool built to study whether an asset is pulling back from strength or breaking down into weakness.
The script compares the active symbol against a selected benchmark, builds a relative-strength baseline, evaluates leader status, measures pullback depth, maps a pullback pocket, marks the recovery rail, and summarizes the full context inside a compact AG Pro panel.
It does not predict future price, automate trades, or claim that every leader pullback must recover. It is a structured decision-support map for reading relative strength, benchmark leadership, pullback health, recovery readiness, and relative breakdown risk.
🎯 Purpose & Design Philosophy
Pullbacks are not all equal.
Some pullbacks happen while the asset continues to outperform its benchmark.
Other pullbacks happen because relative strength is already breaking down.
This script was built to separate those two conditions. The design goal is to help traders identify whether a pullback belongs to a still-strong relative leader or a weakening laggard.
⚡ Why This Script Is Different
Most pullback tools focus only on price.
Most relative-strength tools focus only on the ratio line.
This script does NOT treat pullback quality and relative strength as separate ideas.
Instead, it combines benchmark-relative leadership, price pullback depth, trend shelf behavior, recovery rail reclaim, and relative breakdown risk into one visual map.
The focus is not only whether price pulled back.
The focus is whether the asset remained a leader while pulling back.
⚙️ Methodology
1. Benchmark Comparison
The script compares the active symbol against a selected benchmark using a relative-strength ratio.
2. Relative Strength Baseline
The ratio is smoothed into a baseline so leadership can be evaluated against its own recent behavior.
3. Leader Status Scoring
Leader status combines relative-strength distance, relative-strength slope, and price trend structure.
4. Pullback Depth Measurement
The script measures how far price has pulled back from the recent high using ATR-normalized depth and percentage depth.
5. Pullback Pocket Mapping
The pullback pocket is mapped between the fast recovery rail and the deeper trend shelf.
6. Recovery Evaluation
The script checks whether price is reclaiming the recovery rail while relative strength remains constructive.
7. Visual Output
The chart displays the pullback pocket, recovery rail, relative-strength rail, leader/laggard labels, right-side context tags, alerts, and a compact AG Pro panel.
🗺️ How to Read the Chart
Relative Pullback Pocket = the area where a leader pullback can remain structurally constructive.
Recovery Rail = the fast trend rail used to evaluate whether price is starting to recover from the pullback.
RS LEADER tag = the active symbol is outperforming the selected benchmark with constructive relative strength.
PULLBACK tag = the current pullback depth measured in ATR.
LEADER PULLBACK = the asset remains a relative leader while pulling into a meaningful pullback area.
RS HOLD = relative strength remains constructive during the pullback.
RECOVERY READY = price reclaimed the recovery rail while relative strength remained constructive.
RS BREAK = relative strength weakened or price broke the deeper pullback shelf.
Panel = summarizes relative state, quality score, leader status, pullback depth, recovery trigger, benchmark, and next context.
🚦 Signals & States
• LEADER PULLBACK → the asset remains a relative leader while pulling back.
• RS HOLD → relative strength is still holding during the pullback.
• RECOVERY READY → price reclaimed the recovery rail with constructive relative strength.
• RS BREAK → relative strength weakened or the pullback shelf broke.
• LAGGARD RISK → price is pulling back while the asset is no longer a clear relative leader.
🔔 Alerts Logic
Alerts can trigger when a leader pullback appears, relative strength holds, recovery becomes ready, or relative breakdown appears.
These alerts are attention markers only.
They are not trade instructions, entry signals, exit signals, or guaranteed outcomes.
🧩 Confluence Logic
The context becomes stronger when the active symbol remains above its relative-strength baseline, relative-strength slope is constructive, pullback depth is meaningful but not too deep, and price starts reclaiming the recovery rail.
The context becomes weaker when relative strength drops below its baseline, the slope turns down, or price breaks below the deeper trend shelf.
📊 When to Use
• During trend pullbacks
• When comparing an asset against a benchmark
• In crypto rotation analysis
• In stock or ETF relative-strength review
• When looking for leader pullbacks rather than weak pullbacks
• When filtering pullbacks by benchmark-relative performance
⚠️ When NOT to Use
• On symbols with poor benchmark fit
• During extremely noisy sideways markets
• In low-liquidity markets with unreliable candles
• When benchmark data is missing or unsuitable
• As a standalone buy or sell system
🎛️ Key Inputs
• Benchmark Symbol → defines the market used for relative comparison.
• Relative Strength Baseline → controls the smoothing length of the RS ratio.
• RS Slope Lookback → controls how relative-strength direction is evaluated.
• Minimum Leader Score → controls how strict leader classification should be.
• Fast Trend Length → controls the recovery rail.
• Slow Trend Length → controls the deeper pullback shelf.
• Pullback Lookback → controls the recent high used to measure pullback depth.
• Maximum Healthy Pullback ATR → controls when a pullback becomes too deep.
• Label and Panel Font Size → controls chart readability.
🖥️ Interface & Visual Design
The visual design is built around one question:
Is this still a leader pullback?
The pullback pocket shows the structural area, the recovery rail marks the reclaim reference, the relative-strength rail keeps benchmark context visible, the labels mark state changes, and the AG Pro panel summarizes the current decision context.
🧪 Practical Usage Workflow
1. Select an appropriate benchmark.
2. Read the panel first.
3. Check whether the asset is a relative leader.
4. Review pullback depth.
5. Look at the pullback pocket.
6. Watch whether price reclaims the recovery rail.
7. Confirm the broader market structure independently.
🔍 Interpretation Guidelines
A leader pullback means the asset is pulling back while still holding relative strength.
An RS hold means relative leadership has not broken yet.
Recovery ready means price has started reclaiming the recovery rail while relative strength remains constructive.
An RS break means the pullback may no longer be a clean leader pullback.
None of these states guarantee what happens next.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a financial advice tool.
It is not an automated trading system.
It does not guarantee recovery after a leader pullback.
It does not guarantee that relative leaders will continue outperforming.
It does not replace risk management or independent analysis.
⚠️ Limitations & Transparency
Relative strength depends heavily on benchmark selection.
Different benchmarks may produce different interpretations.
Different timeframes may show different relative-strength states.
Fast markets can move through the pullback pocket quickly.
Sideways markets may create unclear relative-strength readings.
🧠 Market Context Notes
Relative strength is most useful when combined with structure, trend, volatility, and market regime.
A pullback in a relative leader can be constructive if leadership remains intact.
A pullback with relative breakdown is a weaker context and should be interpreted with caution.
Benchmark choice matters: crypto pairs may use BTCUSDT, stock charts may use SPY, sector ETFs, or another relevant benchmark.
🧾 Use Case Examples
When ETH pulls back while still outperforming BTC, the script can identify whether the pullback remains constructive or starts losing relative strength.
When a stock pulls back against SPY but relative strength holds above baseline, the script can highlight a leader pullback context.
When price breaks the pullback shelf while RS weakens, the script can flag relative breakdown risk.
🧱 System Philosophy
Relative Strength Pullback Map is part of the AGPro Series approach:
Build visual tools that explain market context clearly, avoid hype, avoid prediction claims, and support structured decision-making.
The goal is not to tell users what to do.
The goal is to help users see whether a pullback belongs to a strong leader or a weakening asset.
🔐 Non-Promise Statement
No script can remove uncertainty from trading.
This tool does not promise accuracy, certainty, profitability, or future performance.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly.
Users are responsible for their own decisions, position sizing, risk management, benchmark selection, and interpretation.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use this script as a structured way to study relative strength, benchmark leadership, pullback depth, and recovery context.
The most valuable output is not a single label.
The value is the full map: relative state, leader status, pullback pocket, recovery rail, and next context.
Penunjuk
Trend Maturity Ladder [AGPro Series]Trend Maturity Ladder
🧠 Core Idea
Is the trend still early, healthy, mature, stretched, or vulnerable to exhaustion?
📌 Overview / What it does
Trend Maturity Ladder is a trend lifecycle visualization tool built to classify the stage of an active trend.
The script builds a staged trend ladder, maps a healthy pullback shelf, marks an invalidation shelf, tracks maturity score, evaluates extension, identifies exhaustion risk, and summarizes the current lifecycle state in an AG Pro panel.
It does not predict price direction, automate trades, or claim that a mature trend must reverse. It is a structured decision-support tool for reading trend stage, pullback quality, and late-trend risk.
🎯 Purpose & Design Philosophy
Many trend tools answer only one question:
Is price trending?
This script was built to answer a more useful question:
Where is the trend in its lifecycle?
The design goal is to help traders separate early trend development, healthy continuation, mature structure, stretched extension, and invalidation pressure.
⚡ Why This Script Is Different
Most trend tools focus on moving average direction, ribbon color, or generic trend strength.
This script does NOT act as another trend-strength meter or moving-average ribbon.
Instead, it models the trend as a ladder with stages: early trend, active trend, mature trend, stretched trend, exhaustion watch, and invalidation pressure. It combines trend alignment, slope, ADX, distance from the slow trend reference, trend age, pullback depth, and momentum risk into one visual lifecycle map.
⚙️ Methodology
1. Context Detection
The script checks fast, slow, and anchor trend alignment to determine whether the market has a bullish trend, bearish trend, or mixed structure.
2. Maturity Scoring
It scores trend age, ATR-adjusted extension, slope, ADX, and moving-average alignment to estimate how mature the trend is.
3. Pullback Evaluation
It builds a healthy pullback shelf around the trend references and checks whether price is pulling back without breaking the broader ladder.
4. Exhaustion and Invalidation Review
It identifies late-trend extension risk and invalidation pressure when price closes through the trend shelf.
5. Visual Output
The chart displays maturity ladder zones, pullback shelves, invalidation shelves, trend rails, event labels, right-side tags, alerts, and a compact AG Pro panel.
🗺️ How to Read the Chart
Trend Maturity Ladder = the active lifecycle zone around the current trend.
Healthy Pullback Shelf = the area where pullbacks can remain structurally constructive.
Invalidation Shelf = the area where the trend ladder becomes vulnerable.
Trend Rails = fast, slow, and anchor trend references.
EARLY TREND = trend alignment is fresh.
ACTIVE TREND = trend structure is aligned and still developing.
MATURE TREND = trend has aged and expanded meaningfully.
STRETCHED TREND = the trend is extended relative to its slow reference.
EXHAUSTION WATCH = maturity, extension, and momentum conditions suggest late-trend risk.
INVALIDATION PRESSURE = price has closed through the invalidation shelf.
Panel = summarizes trend stage, maturity score, direction, pullback health, exhaustion risk, age, extension, and next context.
🚦 Signals & States
• EARLY TREND → trend alignment is fresh and still developing.
• ACTIVE TREND → trend is aligned and not yet deeply mature.
• MATURE TREND → trend has aged and expanded.
• STRETCHED TREND → price is extended from the slow trend reference.
• HEALTHY PULLBACK → price has pulled into the trend shelf without invalidating it.
• EXHAUSTION RISK → maturity, extension, and momentum risk are aligned.
• INVALIDATION PRESSURE → price has closed through the invalidation shelf.
• NO CLEAR TREND → fast, slow, and anchor references are not aligned.
🔔 Alerts Logic
Alerts trigger when a major trend lifecycle state appears.
• Trend Maturity Transition → the active trend stage changes.
• Healthy Trend Pullback → price pulls into the healthy trend shelf without invalidating the ladder.
• Trend Exhaustion Risk → maturity, extension, and momentum conditions align.
• Trend Invalidation Pressure → price closes through the invalidation shelf.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The context becomes stronger when:
• Fast, slow, and anchor trend references align
• The slow reference has directional slope
• ADX supports directional structure
• Pullbacks respect the healthy shelf
• Extension is not excessively stretched
• The panel state agrees with the chart label
Late-trend caution increases when maturity, extension, and RSI pressure align.
📊 When to Use
• Trend-following review
• Pullback continuation planning
• Late-trend risk monitoring
• Crypto, stocks, futures, forex, and liquid markets
• 30m, 1H, 4H, 1D, and 1W charts
• Markets where trend structure is visible
⚠️ When NOT to Use
• Very choppy, non-directional markets
• Low-liquidity assets
• Extremely noisy micro timeframes
• Markets with frequent gaps that distort trend references
• Situations where a single trend score should not be over-interpreted
• When the user wants guaranteed entries or exits
🎛️ Key Inputs
• Fast Trend Length → controls short-term trend pressure.
• Slow Trend Length → controls the main maturity reference.
• Anchor Trend Length → filters weak or mixed trend regimes.
• ATR Length → controls ladder spacing, extension scoring, and label offsets.
• Early Trend Max Age → defines how long a fresh trend can remain early.
• Mature Trend Age → defines when age contributes strongly to maturity.
• Stretched Distance ATR → defines when trend extension becomes stretched.
• Healthy Pullback Width ATR → controls the pullback shelf thickness.
• Invalidation Shelf ATR → controls the distance of the invalidation shelf.
• Exhaustion RSI Level → adds momentum pressure to exhaustion-risk logic.
🖥️ Interface & Visual Design
The visual hierarchy is built around the trend lifecycle:
The ladder shows the active maturity zone.
The pullback shelf shows where continuation can be evaluated.
The invalidation shelf shows where the trend becomes vulnerable.
Event labels mark lifecycle transitions and risk states.
Right-side tags keep the current trend stage visible.
The AG Pro panel compresses the current trend lifecycle into a fast, readable summary.
🧪 Practical Usage Workflow
1. Read the panel trend stage.
2. Check whether trend direction is aligned.
3. Locate the healthy pullback shelf.
4. Watch whether price respects or breaks the shelf.
5. Check maturity score and exhaustion risk.
6. Confirm with market structure, liquidity, volume, and risk planning.
🔍 Interpretation Guidelines
An early trend does not guarantee continuation.
A mature trend does not guarantee reversal.
Exhaustion risk does not mean price must immediately turn.
Invalidation pressure means the current ladder structure has weakened.
The script is best used to understand trend lifecycle context, not to replace independent analysis.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an auto-trading system.
It does not provide guaranteed entry or exit signals.
It is not a moving-average ribbon or a simple trend-strength meter.
⚠️ Limitations & Transparency
Trend stages depend on timeframe.
Choppy markets can create frequent stage changes.
Strong news moves can stretch trend references quickly.
Low-liquidity markets may create unreliable trend readings.
Different assets may require different trend lengths.
🧠 Market Context Notes
Trends often move through recognizable phases:
alignment → expansion → maturity → extension → pullback or invalidation.
This script visualizes that sequence so the user can avoid treating every trend as equally fresh.
🧾 Use Case Examples
If trend references align shortly after a transition, the script may classify EARLY TREND.
If price pulls into the shelf while the ladder remains intact, the script may mark HEALTHY PULLBACK.
If the trend becomes aged and extended while RSI is stretched, the script may mark EXHAUSTION RISK.
If price closes through the invalidation shelf, the script may mark INVALIDATION PRESSURE.
🧱 System Philosophy
The goal is not to chase trend strength.
The goal is to understand trend timing.
This script treats trend as a lifecycle:
early → active → mature → stretched → vulnerable.
🔐 Non-Promise Statement
No trend stage guarantees future price direction.
No pullback shelf guarantees continuation.
No exhaustion label guarantees reversal.
All outputs should be interpreted as analytical context.
📉 Risk Disclosure
Trading involves risk.
This script is for educational and analytical purposes only.
It does not provide financial advice, investment advice, or guaranteed trading outcomes.
Users are fully responsible for their own decisions, risk management, and trade execution.
📚 Educational Note
Use the script to study where trends tend to age, stretch, reset, or fail.
The most important question is not only whether a market is trending.
The better question is whether the trend is still fresh enough to deserve attention.
Penunjuk
Penunjuk
Crypto Market Breadth Risk Planner [AGPro Series]Crypto Market Breadth Risk Planner
🧠 Core Idea
Is the crypto market showing broad risk-on participation, weakening rotation, or a risk-off breadth environment?
📌 Overview / What it does
Crypto Market Breadth Risk Planner is a chart-first market breadth tool built to evaluate whether a selected crypto basket is participating broadly or weakening internally.
Instead of reading only the active chart symbol, the script reviews a configurable basket of major crypto pairs. It measures how many symbols are trading above their trend baseline, how many have positive momentum, how many have rising trend structure, and how much volatility stress is present across the basket.
The script produces a 0-100 Breadth Risk Score, a colored breadth risk corridor on the active chart, event labels, right-side tags, alerts, and a compact AG Pro panel. It does not predict price direction, automate execution, or claim that breadth alone is enough to trade.
🎯 Purpose & Design Philosophy
This script was built because single-chart analysis can look strong while the broader crypto market is quietly weakening, or look weak while breadth is beginning to rotate back into strength.
The purpose is to help traders read market participation before treating an individual setup as clean. Strong setups usually have a better context when the broader basket is aligned, while weaker breadth can warn that a chart may be more exposed to false follow-through.
The design supports traders who want broader market context without opening ten charts manually. It turns cross-market participation into a simple decision-support layer that can be read directly on the current chart.
⚡ Why This Script Is Different
Most crypto tools focus on the active symbol, a single benchmark, a simple correlation reading, or a raw relative-strength line.
This script does NOT act as a benchmark correlation meter, a relative-strength rotation map, a volume spike detector, or a generic trend dashboard.
Instead, it evaluates breadth across a user-defined crypto basket and converts that participation into a risk-readiness framework. The goal is not to say which coin to buy or sell. The goal is to show whether the broader crypto environment is supportive, mixed, stressed, or risk-off.
⚙️ Methodology
1. Context Detection
The script requests data from a configurable crypto basket and evaluates each symbol on the selected breadth timeframe.
2. Reference Mapping
Each symbol is compared against its own trend baseline, momentum reading, trend slope, and ATR-based volatility stress condition.
3. Reaction Evaluation
The script combines trend participation, momentum participation, slope confirmation, and volatility stress into a single Breadth Risk Score.
4. Visual Output
The final output includes a colored breadth risk corridor, centered corridor text, event labels, right-side tags, optional bar coloring, alerts, and an AG Pro panel.
🗺️ How to Read the Chart
Zones:
The breadth risk corridor is a visual context zone around price. Its color reflects the current breadth regime rather than a direct support or resistance level.
Labels:
Labels mark important breadth state transitions such as Risk-On, Rotation Watch, Risk-Off, Stress Review, and Cooling.
Colors:
Teal represents broad constructive participation.
Pink represents risk-off breadth or weak participation.
Gold represents stress or caution.
Indigo represents improving rotation or transitional breadth.
Panel:
The panel summarizes breadth participation, Breadth Risk Score, momentum, stress, regime, and action state.
🚦 Signals & States
• Risk-On Ready → Broad participation and momentum are strong enough to support risk-on review.
• Rotation Watch → Breadth is improving, but not yet strong enough for full risk-on classification.
• Stress Review → Volatility stress is elevated while breadth quality remains weak.
• Risk-Off → Basket participation is weak or deteriorating.
• Cooling → Stress is easing while breadth quality begins to improve.
• Wait Breadth → No strong breadth regime is currently active.
🔔 Alerts Logic
Alerts can trigger when the basket shifts into Risk-On, Rotation Watch, Risk-Off, Stress Review, or Cooling.
Alerts are attention markers only. They highlight changes in the breadth model. They are not trade instructions, automated entries, or guaranteed market calls.
🧩 Confluence Logic
The context becomes stronger when multiple breadth layers align together.
For example, a high Breadth Risk Score with many symbols above their trend baselines, positive momentum participation, rising trend slopes, and low stress suggests a cleaner risk-on environment than a rally led by only one or two symbols.
Likewise, weak participation combined with elevated stress can warn that individual bullish setups may need stricter review.
📊 When to Use
• Crypto market context review
• BTC, ETH, altcoin, and sector-style crypto watchlists
• 1H, 4H, and 1D market participation analysis
• Before treating individual setups as risk-on
• When the trader wants to know whether the broader crypto basket supports the active chart
⚠️ When NOT to Use
• Markets where selected symbols have unreliable data
• Very small or illiquid crypto pairs with distorted candles
• Situations where the basket does not match the user's trading universe
• Low-timeframe scalping where external-symbol breadth may be too slow
• News-driven events where correlation and breadth can change abruptly
🎛️ Key Inputs
• Crypto Basket Symbols → define the assets used in the breadth model
• Breadth Timeframe → controls whether the basket is evaluated on chart timeframe, 1H, 4H, or 1D
• Trend Baseline Length → controls the EMA reference used for participation
• Momentum Length → controls the ROC window used for positive or negative participation
• ATR Stress Threshold → controls when basket volatility begins to count as stress
• Minimum Risk-On Score → controls how selective the risk-on state should be
• Visual Settings → control corridor, labels, right-side tags, panel location, theme, and font size
🖥️ Interface & Visual Design
The interface is designed to make broad crypto participation readable without turning the chart into a large dashboard.
The corridor gives a fast visual state directly on the chart. The panel provides the structured readout. Labels mark only important transitions, while cooldown and memory controls keep historical events from overwhelming the chart.
The visual intent is premium, clean, and publication-friendly.
🧪 Practical Usage Workflow
1. Read the panel to identify the current breadth regime.
2. Check the Breadth Risk Score and participation percentage.
3. Review whether momentum and stress support or conflict with the active chart setup.
4. Use the corridor color as a market-context layer, not as a direct entry zone.
5. Combine breadth context with price structure, volatility, liquidity, and personal risk rules.
🔍 Interpretation Guidelines
A strong score means the selected crypto basket is broadly aligned according to the script's rules.
A Rotation Watch state means breadth is improving, but the market has not fully confirmed broad risk-on participation.
A Stress Review state means volatility pressure is elevated while breadth remains weak or mixed.
A Risk-Off state means the selected basket is not supporting broad participation under the current settings.
🚫 What This Script Is NOT
This script is not a prediction engine.
This script is not financial advice.
This script is not an automated trading system.
This script does not place orders.
This script does not guarantee market direction, continuation, reversal, or profitability.
⚠️ Limitations & Transparency
This script depends on the selected symbols, selected timeframe, and TradingView data availability.
Different baskets can produce different breadth readings. A BTC-heavy basket may behave differently from an altcoin-heavy basket. External symbol data may also load differently depending on market, exchange, and TradingView availability.
The script should be interpreted as market context, not as a standalone execution model.
🧠 Market Context Notes
Crypto often moves through participation waves. Sometimes BTC leads while altcoins lag. Sometimes the whole market rotates together. Sometimes volatility rises while breadth deteriorates, creating a more fragile environment.
This script is designed to make that internal participation easier to observe directly from the active chart.
🧾 Use Case Examples
Example 1:
BTC is breaking higher, but the panel shows weak breadth and high stress. The trader may decide that the move needs extra confirmation before treating it as broad risk-on.
Example 2:
ETH is consolidating, but the basket shifts into Rotation Watch with improving momentum. The trader can monitor whether the active chart begins to align with the broader rotation.
Example 3:
The basket prints Risk-Off while an individual altcoin setup looks technically clean. The script warns that the broader market backdrop is not supportive under the current model.
🧱 System Philosophy
AGPro Series tools are built as decision-support frameworks, not signal vending machines.
This script follows that philosophy by turning broad market participation into a structured context layer: define the basket, score the breadth, map the state, and show the next action clearly.
🔐 Non-Promise Statement
This script does not promise certainty.
It does not promise that a risk-on breadth state will produce gains, or that a risk-off state will produce losses. It only organizes participation context so the user can evaluate the broader market with more clarity.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly, and breadth models can fail or become less useful during sudden volatility, exchange-specific moves, or news-driven repricing. Users remain responsible for their own decisions, execution, and risk management.
This script is for educational and analytical purposes only. It does not provide financial advice.
📚 Educational Note
Use this tool to study how crypto breadth changes before, during, and after major market moves.
Its strongest value comes from comparing the active chart with the broader basket context rather than reading any single label in isolation.
Penunjuk
Trend Exhaustion Snapback Planner [AGPro Series]Trend Exhaustion Snapback Planner
🧠 Core Idea
Is the current trend stretch becoming snapback-ready, or is momentum still supported enough to avoid calling exhaustion too early?
📌 Overview / What it does
Trend Exhaustion Snapback Planner is a rule-based trend exhaustion and mean-reversion planning tool. It measures how far price has stretched away from its trend mean, then evaluates whether that stretch is supported by pressure, efficiency loss, wick behavior, and room back toward value.
The script produces an exhaustion pocket, snapback rail, failure rail, room reference, event labels, right-side tags, optional bar coloring, and a compact AG Pro dashboard with a 0-100 Snapback Score.
It does not predict reversals. It helps organize trend stretch, exhaustion quality, snapback reclaim behavior, failure risk, and next-action state.
🎯 Purpose & Design Philosophy
Strong trends can stay stretched for longer than expected. At the same time, many reversals begin only after a trend becomes inefficient and price starts moving back toward value.
This script was built to help traders review that transition without relying on a simple overbought or oversold reading.
It supports a patient workflow: identify stretch, wait for reclaim behavior, evaluate room, then interpret the active state within broader market context.
⚡ Why This Script Is Different
Most exhaustion tools focus on RSI extremes, distance from a moving average, or isolated reversal candles.
This script does NOT treat every stretched move as a reversal.
Instead, it maps a live exhaustion pocket, scores stretch quality, tracks snapback reclaim behavior, defines where the idea fails, and shows whether there is room back toward the trend mean.
⚙️ Methodology
1. Trend Stretch Detection
The script measures price distance from a trend mean using ATR normalization.
2. Pressure Evaluation
RSI pressure, wick behavior, and trend-efficiency loss are reviewed to decide whether the extension is weakening.
3. Snapback Rail Mapping
Once a valid exhaustion pocket appears, the snapback rail becomes the first reclaim threshold.
4. Risk / Room Structure
The failure rail marks continuation risk, while the room rail shows the value or structure reference that price may test after reclaim.
5. Visual Output
The chart receives the exhaustion pocket, trend mean, snapback rail, failure rail, room rail, event labels, right-side tags, optional bar coloring, and dashboard panel.
🗺️ How to Read the Chart
The exhaustion pocket marks the stretch area created after price moves far away from its trend mean.
The snapback rail shows the reclaim level that improves the snapback context.
The failure rail marks where continuation risk invalidates the active snapback idea.
The room rail shows the next value or structure reference after the snapback begins.
Labels highlight stretch pockets, snapback reclaim, pocket pressure, room tests, and failed snapbacks.
Colors represent context:
• Teal → bullish snapback context
• Pink → bearish snapback context or failure
• Gold → room, waiting, or neutral review
• Indigo → pocket pressure or monitoring context
The panel summarizes:
• Pocket
• Snapback Score
• Stretch
• Room
• Action
🚦 Signals & States
• Bull Snapback Pocket → downside trend stretch with bullish snapback context
• Bear Snapback Pocket → upside trend stretch with bearish snapback context
• Snapback Reclaim → price reclaimed the active snapback rail
• Pocket Pressure → price is testing the exhaustion pocket without clean reclaim
• Room Test → price reached the active room reference
• Failed → price crossed the failure rail
• READY → reclaim and score quality are strong enough to monitor
• MONITOR → snapback context is active but not fully ready
• WAIT RECLAIM → pocket exists but reclaim has not confirmed
• EXPIRED → the pocket is too old to remain active
🔔 Alerts Logic
Alerts can trigger when a bullish or bearish snapback pocket appears, when price reclaims the snapback rail, when the READY state appears, when pocket pressure appears, when the room rail is reached, or when the context fails.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The context becomes stronger when ATR stretch, RSI pressure, wick behavior, efficiency loss, snapback reclaim, and room back toward value align.
No single condition is treated as enough by itself.
📊 When to Use
• Mature directional moves
• Strong extensions away from trend mean
• Markets with visible impulse and reaction structure
• 1H, 4H, and 1D review where exhaustion context matters
• Crypto, indices, forex, and liquid stocks
⚠️ When NOT to Use
• Extremely illiquid symbols
• Very low-volume periods
• News shock candles with abnormal gaps
• Very tight ranges with no meaningful trend stretch
• Markets where spreads or wicks dominate the structure
🎛️ Key Inputs
• ATR Length → normalizes trend stretch and rail distances
• Trend Mean Length → controls the main value reference
• Minimum Stretch ATR → controls how stretched price must be before a pocket appears
• RSI Pressure → controls pressure thresholds for extended conditions
• Efficiency Length → controls how trend efficiency loss is measured
• Minimum Ready Score → controls how strict READY classification is
• Projection Bars → controls how far rails and zones extend
• Visual settings → control labels, tags, panel location, theme, and font size
🖥️ Interface & Visual Design
The panel is designed as a compact decision dashboard, not a large data table.
The first row uses a merged AG Pro header. The remaining rows show the pocket state, score, stretch context, room, and action.
The visual hierarchy is built so traders can read the active plan quickly without losing chart structure.
🧪 Practical Usage Workflow
1. Read the panel.
2. Check whether an exhaustion pocket is active.
3. Watch the snapback rail for reclaim behavior.
4. Review failure risk and room back toward value.
5. Interpret labels as context markers, not trade commands.
🔍 Interpretation Guidelines
A high score means the active stretch has multiple snapback conditions aligned.
A snapback reclaim improves the context, but it does not guarantee continuation toward the room rail.
A failed state means price crossed the continuation-risk boundary for that active pocket.
Use the script to organize the question, not to outsource the answer.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not place orders.
It does not guarantee reversal timing, target reach, or profitability.
⚠️ Limitations & Transparency
Trend exhaustion can remain extended for long periods.
Different timeframes may show different exhaustion and snapback contexts.
Volatility spikes can distort ATR-normalized distance.
Low liquidity can create false stretch pockets or unreliable wick behavior.
The script is rule-based and should be interpreted within broader market context.
🧠 Market Context Notes
Trend exhaustion is not the same as trend reversal.
The most useful snapback contexts often appear when price stretches away from value, momentum efficiency weakens, and reclaim behavior begins before the failure rail breaks.
The strongest readings usually come from alignment between structure, volatility, and reaction quality.
🧾 Use Case Examples
When price stretches far above the trend mean, RSI pressure rises, and the candle begins reclaiming back through the snapback rail, the bearish snapback context may become more meaningful.
When price stretches below the trend mean but cannot reclaim the snapback rail, the script may remain in WAIT RECLAIM or PRESSURE instead of READY.
When price reaches the room rail after reclaim, the context shifts into room review rather than fresh entry signaling.
🧱 System Philosophy
AGPro Series tools are built as decision-support systems.
They aim to convert market structure into readable context: what is active, what improves the plan, what invalidates it, and what should be reviewed next.
🔐 Non-Promise Statement
No script can provide certainty.
No signal guarantees outcome.
This tool provides structured context only.
📉 Risk Disclosure
Trading involves risk.
Markets can move quickly and unexpectedly.
Users are responsible for their own analysis, risk management, and decisions.
This script does not provide financial advice.
📚 Educational Note
Use this tool to study how trend stretch, momentum pressure, efficiency loss, and snapback behavior interact across different markets and timeframes.
Penunjuk
Post-Breakout Risk Ladder [AGPro Series]Post-Breakout Risk Ladder
🧠 Core Idea
After a breakout happens, is the move still offering clean target room or is pullback risk taking control?
📌 Overview / What it does
Post-Breakout Risk Ladder maps a breakout base, locks the breakout edge, and converts the post-breakout move into a structured R-based risk ladder.
The script displays a breakout base, pullback risk shelf, entry rail, invalidation rail, 1R / 2R / 3R target rails, target defense labels, pullback test labels, and a compact AG Pro dashboard.
It does not predict that a breakout will continue. It helps organize what happens after a breakout: current R, pullback risk, target room, invalidation, and action state.
🎯 Purpose & Design Philosophy
Many breakout tools focus only on the breakout candle.
This script was built for the part that comes next: the risk management phase after the breakout is already visible.
It helps traders read whether the breakout is still structured, whether the pullback is healthy, whether the next target has room, and whether the breakout context has failed.
⚡ Why This Script Is Different
Most breakout indicators highlight the break itself.
This script does NOT treat the breakout as the end of the analysis.
Instead, it builds a post-breakout planning map with a base, entry reference, invalidation shelf, R ladder, pullback risk score, target room, and target defense context.
⚙️ Methodology
1. Breakout Base Detection
The script defines a recent base using completed bars and checks whether price closes beyond the base edge with enough displacement quality.
2. Breakout Lock
When the breakout qualifies, the script locks the base high/low, breakout edge, entry reference, and invalidation edge.
3. Risk Ladder Mapping
Risk is standardized into R units from the breakout entry to invalidation. Target rails are projected as 1R, 2R, and 3R references.
4. Pullback and Defense Evaluation
The script tracks pullback tests into the breakout shelf, current R, target room, and target defense behavior.
🗺️ How to Read the Chart
The breakout base shows the structure that price broke from.
The pullback shelf marks the zone where a retest may remain constructive or become risky.
The entry rail and invalidation rail define the R unit.
The 1R, 2R, and 3R rails show post-breakout target references.
Labels highlight breakout locks, pullback tests, target defense, and invalidation.
The panel summarizes:
• Breakout state
• Current R
• Pullback risk
• Target room
• Action state
🚦 Signals & States
• Bull Breakout → price closed above the breakout base with acceptable quality
• Bear Breakout → price closed below the breakout base with acceptable quality
• Pullback Test → price is testing the post-breakout shelf
• Target Defense → price has reached or interacted with an R target rail
• Invalidated → price lost the active breakout structure
• Expired → the breakout ladder is too old to remain active
🔔 Alerts Logic
Alerts can trigger when a breakout ladder is locked, when the breakout context is READY, when price tests the pullback shelf, when the ladder invalidates, or when target defense appears.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The breakout context becomes stronger when base quality, breakout body strength, relative volume, pullback shelf behavior, and target room align.
The R ladder helps separate structured continuation from late or overextended movement.
📊 When to Use
• After clear range breaks
• During breakout retests
• In trending markets with continuation attempts
• When evaluating post-breakout risk-to-room structure
• On liquid symbols with readable candles and volume
⚠️ When NOT to Use
• Very low-liquidity markets
• Extremely noisy sideways ranges
• Random spike candles without structure
• News candles with unstable spreads
• When no meaningful base exists before the breakout
🎛️ Key Inputs
• Base Lookback Bars → controls how the breakout base is detected
• Break Buffer ATR → controls how far beyond the base price must close
• Minimum Break Body Ratio → filters weak wick-only breaks
• Minimum Relative Volume → filters low-participation breaks
• Retest Shelf ATR → controls the pullback shelf around the broken edge
• Invalidation Buffer ATR → controls where the ladder fails
• Target R Settings → control the 1R / 2R / 3R ladder rails
🖥️ Interface & Visual Design
The visual hierarchy is designed around post-breakout planning.
The base defines context, the shelf defines pullback risk, the rails define R structure, and the panel provides a quick state read.
The goal is to keep the chart useful, structured, and premium without turning it into a cluttered signal board.
🧪 Practical Usage Workflow
1. Check whether a breakout ladder is active
2. Read current R in the panel
3. Inspect the pullback shelf
4. Compare target room with pullback risk
5. Watch invalidation and target defense labels
🔍 Interpretation Guidelines
A READY state means the breakout ladder has enough structure to monitor.
Current R helps measure how far price has moved from the breakout reference.
Pullback risk helps evaluate whether price is still respecting the breakout shelf.
Target room helps avoid treating late moves the same as early moves.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a guaranteed breakout system.
It is not an automated trading tool.
It does not provide financial advice.
It does not guarantee continuation, reversal, targets, or profit.
⚠️ Limitations & Transparency
Breakout quality depends on market structure, volatility, liquidity, and timeframe.
Some breakouts may fail quickly.
Some slow breakouts may not trigger if candle quality or volume is too weak.
R levels are planning references, not guaranteed destinations.
🧠 Market Context Notes
Breakouts are often strongest when structure, participation, and follow-through align.
A breakout with clean target room and controlled pullback risk is different from a late breakout already pressing into extension.
Use the ladder as context, not certainty.
🧾 Use Case Examples
When price breaks above a recent base, the script locks the breakout edge and projects 1R / 2R / 3R references.
If price later pulls back into the shelf, the script marks pullback risk so the user can evaluate whether the structure remains intact.
If price reaches a target rail, target defense labels help identify where the move may need confirmation.
🧱 System Philosophy
AGPro Series tools are built as decision-support engines.
The purpose is to organize market behavior into structure, score, state, and risk context rather than providing blind buy or sell calls.
🔐 Non-Promise Statement
No breakout is certain.
No target rail is guaranteed.
No script can remove risk.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own analysis, decisions, risk management, and execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use this tool to study how breakout bases, retests, invalidation, current R, and target room interact across different markets and timeframes.
Penunjuk
Anchored VWAP Risk Ladder [AGPro Series]Anchored VWAP Risk Ladder
🧠 Core Idea
After an important market event, is price trading close to fair value or becoming extended relative to the anchored VWAP?
📌 Overview / What it does
Anchored VWAP Risk Ladder builds a volume-weighted average price from a selected anchor event and turns the distance from that anchor into a structured risk ladder.
The script displays anchored VWAP, volume-weighted deviation bands, right-side ladder tags, reclaim and lose labels, extension context, and a compact AG Pro panel with distance, score, risk ladder, and action state.
It does not predict price direction, automate trades, or claim that anchored VWAP will hold as support or resistance. It organizes event-based volume-weighted context into a readable chart framework.
🎯 Purpose & Design Philosophy
Anchored VWAP is often useful after a meaningful event, but raw AVWAP alone can be difficult to interpret without context.
This script was built to answer a practical question: how far is price from the anchored value area, and is that distance becoming useful, balanced, or risky?
The design supports traders who think in terms of anchored fair value, risk distance, reclaim behavior, and extension zones.
⚡ Why This Script Is Different
Most VWAP tools show a line and leave interpretation fully manual.
This script does NOT stop at plotting anchored VWAP.
Instead, it builds a complete risk ladder around the anchor, adds deviation context, scores reclaim or lose behavior, and summarizes the current state in a clean dashboard.
⚙️ Methodology
1. Anchor Detection
The script can anchor from manual time, high-volume events, swing pivots, session open, week open, or month open.
2. AVWAP Calculation
From the active anchor, the script accumulates volume-weighted price and volume-weighted variance to calculate anchored VWAP and deviation bands.
3. Risk Ladder Mapping
Distance from anchored VWAP is measured in ATR and deviation terms to classify whether price is near value, inside Band 1, inside Band 2, or extended.
4. Visual Output
The script plots AVWAP, upper/lower deviation bands, ladder fills, event labels, right-side tags, bar state color, and a dashboard.
🗺️ How to Read the Chart
The AVWAP rail represents the volume-weighted average price from the active anchor.
Deviation bands represent the ladder around anchored value.
Labels mark anchor events, AVWAP reclaim events, AVWAP lose events, and optional extension-risk conditions.
The panel shows:
• Anchor → current anchor type and age
• Distance → price distance from AVWAP in ATR
• Risk Ladder → current ladder zone and risk score
• Score → current context score and direction state
• Action → READY / MONITOR / WAIT / BLOCKED
🚦 Signals & States
• Anchor Locked → a new event anchor has been selected
• Ready Reclaim → price has reclaimed anchored VWAP with enough context score
• Ready Lose → price has lost anchored VWAP with enough context score
• Near AVWAP → price is close to anchored value
• Band 1 / Band 2 → price is moving away from anchored value
• Extended → distance from AVWAP is elevated
🔔 Alerts Logic
Alerts can trigger when a new anchor is locked, when price reclaims AVWAP, when price loses AVWAP, or when extension-risk conditions appear.
Alerts are attention markers only. They do not represent trade instructions or guaranteed outcomes.
🧩 Confluence Logic
The context becomes stronger when anchored VWAP reclaim or lose behavior aligns with relative volume, acceptable distance, and a clear ladder state.
The risk ladder helps separate balanced conditions from extension conditions.
📊 When to Use
• After high-volume market events
• Around earnings, news, breakout, or liquidation-style candles
• During trend continuation pullbacks
• When studying institutional average price context
• On liquid symbols with meaningful volume data
⚠️ When NOT to Use
• Very low-liquidity symbols
• Markets with unreliable or synthetic volume
• Extremely choppy conditions where anchors reset too often
• Situations where the selected anchor is not meaningful
• When using AVWAP as a standalone trading signal
🎛️ Key Inputs
• Anchor Mode → controls how AVWAP is anchored
• Manual Anchor Time → user-defined anchor timestamp
• High Volume Anchor Threshold → controls automatic high-volume anchors
• Deviation Band 1 / 2 → controls ladder width
• Extension Risk ATR → controls when distance becomes elevated
• Minimum Ready Score → controls reclaim or lose strictness
• Visual Settings → control bands, labels, tags, panel, and bar colors
🖥️ Interface & Visual Design
The interface is built for fast visual hierarchy.
AVWAP is the central reference, deviation bands define the risk ladder, right-side tags make the ladder readable, and the panel summarizes state without forcing the user to inspect every line manually.
🧪 Practical Usage Workflow
1. Choose the anchor mode
2. Read the active anchor and distance in the panel
3. Check whether price is near AVWAP or extended
4. Watch reclaim or lose labels around AVWAP
5. Use broader structure and risk context before making any decision
🔍 Interpretation Guidelines
Price near AVWAP often represents a balanced value area relative to the anchor.
Price far from AVWAP may represent stronger trend behavior, but it may also carry extension risk.
READY states mark meaningful reclaim or lose behavior, not certainty.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not an automated trading system.
It does not guarantee support, resistance, continuation, reversal, or profit.
It is not financial advice.
⚠️ Limitations & Transparency
Anchored VWAP quality depends heavily on anchor selection.
Different timeframes may produce different anchor timing and visual structure.
Volume data quality may vary between symbols, brokers, and exchanges.
Deviation bands are statistical references, not fixed market boundaries.
🧠 Market Context Notes
Anchored VWAP works best when the anchor represents a meaningful market event.
High-volume displacement, swing pivots, session opens, weekly opens, and monthly opens may each tell a different story.
The user should choose the anchor mode that best fits the market question.
🧾 Use Case Examples
When a high-volume candle creates a new anchor, the script tracks whether price remains near the anchored value area or begins to extend away from it.
When price reclaims AVWAP with enough score, the script marks a READY reclaim context.
When price loses AVWAP with enough score, the script marks a READY lose context.
🧱 System Philosophy
AGPro Series tools are built as decision-support engines.
The purpose is to structure market context into readable zones, states, scores, and risk references without turning analysis into blind signal-following.
🔐 Non-Promise Statement
No script can provide certainty.
No AVWAP level guarantees a reaction.
No signal guarantees continuation, reversal, or profit.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own analysis, decisions, risk management, and execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use this tool to study how anchored value, volume-weighted distance, deviation bands, reclaim behavior, and extension risk interact across different market conditions.
Penunjuk
Order Flow Imbalance Recovery Planner [AGPro Series]Order Flow Imbalance Recovery Planner
🧠 Core Idea
Can a high-volume displacement pocket recover with enough absorption and follow-through to become actionable chart context?
📌 Overview / What it does
Order Flow Imbalance Recovery Planner maps high-volume displacement candles, converts them into practical imbalance recovery pockets, and evaluates whether price can recover that pocket with measurable response.
The script produces imbalance pockets, recovery rails, continuation corridors, invalidation shelves, target reference rails, event labels, and a compact AG Pro dashboard with a 0-100 recovery score.
This script does not read live order book data, footprint data, bid/ask tape, or true exchange-level order flow. It uses chart-available volume, relative volume, candle displacement, wick response, and recovery behavior as a practical visual proxy.
🎯 Purpose & Design Philosophy
The script was built for traders who want a structured way to study volume imbalance recovery instead of reacting to every large candle.
Many displacement candles look important at first, but the useful question is whether price can return to the pocket, absorb pressure, and recover the key rail.
The design supports a context-first workflow: identify the imbalance, observe the test, evaluate the recovery quality, and then read the current state.
⚡ Why This Script Is Different
Most tools mark volume spikes or wide candles as isolated events.
This script does NOT treat every high-volume candle as a signal.
Instead, it builds a recovery pocket, scores the reaction around that pocket, separates test conditions from READY conditions, and keeps invalidation visible.
⚙️ Methodology
1. Context Detection
The script searches for directional displacement candles with elevated relative volume, meaningful candle range, and sufficient body commitment.
2. Reference Mapping
When a valid imbalance is found, the script maps a recovery pocket and a recovery rail around the displacement body.
3. Reaction Evaluation
Price interaction with the pocket is evaluated through retest behavior, close location, wick response, relative volume, freshness, and failure distance.
4. Visual Output
The script displays the active pocket, recovery rail, target rails, invalidation shelf, event labels, bar state color, and dashboard state.
🗺️ How to Read the Chart
Zones represent the active imbalance recovery pocket.
The recovery rail marks the key level price needs to reclaim or lose before the context improves.
Labels highlight new imbalance pockets, pocket tests, ready recovery events, invalidations, and expirations.
Colors:
• Teal = bullish recovery context
• Pink = bearish recovery context or failed context
• Gold = neutral or wait state
• Indigo = monitor or reference state
The panel summarizes imbalance state, recovery score, flow response, risk, and action.
🚦 Signals & States
• Bull Imbalance → a bullish high-volume displacement pocket has been mapped
• Bear Imbalance → a bearish high-volume displacement pocket has been mapped
• Pocket Test → price is interacting with the active imbalance pocket
• Ready Recovery → the recovery score has reached the required threshold
• Invalidated → price has moved beyond the active failure edge
• Expired → the imbalance pocket is too old to remain active
🔔 Alerts Logic
Alerts can trigger when a new imbalance pocket is locked, when price tests the active pocket, when recovery reaches READY status, or when the context is invalidated.
Alerts are attention markers only. They are not trade instructions and do not guarantee future price behavior.
🧩 Confluence Logic
The context becomes stronger when high relative volume, large displacement, clean pocket retest, wick absorption, and recovery close align around the same pocket.
📊 When to Use
• After high-volume displacement candles
• During pullback and recovery phases
• Around breakout continuation attempts
• When studying absorption after aggressive movement
• On liquid symbols with reliable volume data
⚠️ When NOT to Use
• Very low-liquidity markets
• Symbols with unreliable volume data
• Extremely noisy sideways sessions
• News-driven spikes with unstable spreads
• Markets where chart volume does not represent meaningful participation
🎛️ Key Inputs
• Minimum Displacement Range → controls how large a candle must be relative to ATR
• Minimum Body Ratio → filters weak candles with too much wick noise
• Minimum Relative Volume → controls how much volume confirmation is required
• Minimum Ready Score → controls how strict the READY state is
• Projection Bars → controls how far active pockets and rails extend
• Visual Settings → control labels, zones, right-side tags, panel, font size, and bar colors
🖥️ Interface & Visual Design
The dashboard is designed as a quick decision-support panel, not a separate oscillator.
The chart uses a clear hierarchy: pocket first, recovery rail second, labels third, and targets only after recovery context becomes relevant.
The goal is to keep the chart premium, readable, and useful at first glance.
🧪 Practical Usage Workflow
1. Read the panel state
2. Locate the active imbalance pocket
3. Check whether price is testing or recovering the pocket
4. Review the recovery score and risk
5. Compare the output with broader market structure
🔍 Interpretation Guidelines
A READY state means the script has detected enough recovery behavior around the imbalance pocket to mark the context as worth attention.
It does not mean price must continue.
Use the output as structured context together with trend, liquidity, volatility, and higher-timeframe conditions.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a true order book, footprint, or bid/ask delta tool.
It is not an automated trading system.
It does not provide guaranteed signals.
It is not financial advice.
⚠️ Limitations & Transparency
The script uses chart-available data only.
Volume quality differs between markets, brokers, exchanges, and asset classes.
Timeframe changes may alter the appearance and timing of imbalance pockets.
Extreme volatility may produce rapid invalidation or repeated displacement events.
🧠 Market Context Notes
Order-flow style interpretation should always consider liquidity, volatility, structure, and session context.
A strong recovery pocket in a clean trend may carry more practical meaning than the same pocket inside a noisy range.
🧾 Use Case Examples
When price creates a high-volume bullish displacement candle and later retests the pocket, the script evaluates whether the retest shows enough absorption and recovery strength to become a READY context.
When price loses the recovery edge, the script marks invalidation rather than keeping the setup visually alive.
🧱 System Philosophy
AGPro Series tools are designed as decision-support engines.
The goal is not to simplify markets into blind signals, but to organize complex price behavior into readable structure, state, and risk context.
🔐 Non-Promise Statement
No script can provide certainty.
No signal guarantees continuation, reversal, or profit.
Outputs should be interpreted as analytical context only.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use this tool to study how volume displacement, imbalance pockets, absorption, and recovery behavior interact across different markets and timeframes.
Penunjuk
Supply Demand Flip Planner [AGPro Series]Supply Demand Flip Planner
🧠 Core Idea
Has an old supply or demand zone changed role and started acting as the opposite side of the market?
📌 Overview / What it does
Supply Demand Flip Planner is a role-change price action tool designed to identify when a prior supply zone turns into demand, or when a prior demand zone turns into supply.
The script detects pivot-based supply and demand zones, monitors breaks through those zones, maps the active flip zone, evaluates retest acceptance, and displays a structured 0-100 score. It also shows invalidation shelves, target rails, centered zone text, labels, and a compact AG Pro dashboard.
It does not predict future price movement, automate trades, or provide guaranteed buy/sell signals. It is a visual decision-support framework for reading supply-demand flip behavior.
🎯 Purpose & Design Philosophy
This script was built for traders who watch support/resistance role reversal but want a cleaner way to separate meaningful flips from ordinary breaks.
Many zones break and never matter again. Some zones break, retest, and start acting as the opposite side of the market. This planner focuses on that role-change moment.
The design supports a structured workflow: map supply and demand, wait for break, monitor retest, evaluate acceptance, then track invalidation.
⚡ Why This Script Is Different
Most supply and demand tools draw zones and leave interpretation fully manual.
This script does NOT simply flood the chart with historical zones.
Instead, it focuses on the active role-change zone, measures retest quality, scores acceptance, and presents the result through a clear READY / MONITOR / WAIT / INVALIDATED framework.
⚙️ Methodology
1. Context Detection
The script detects pivot-based supply and demand zones using configurable left/right pivot confirmation.
2. Reference Mapping
It maps source supply and demand shelves, then converts a broken zone into an active flip zone.
3. Reaction Evaluation
When price retests the flip zone, the script evaluates break strength, retest depth, wick response, body quality, source-zone quality, freshness, and relative volume.
4. Visual Output
The active flip zone is shown with centered text, invalidation shelf, target rails, right-side tags, labels, and an AG Pro panel.
🗺️ How to Read the Chart
Supply zones represent pivot-based resistance shelves.
Demand zones represent pivot-based support shelves.
Demand Flip means old supply has been broken and is being evaluated as new demand.
Supply Flip means old demand has been broken and is being evaluated as new supply.
READY FLIP labels mark retests that pass the selected acceptance score.
Invalidation shelf marks where the flip context weakens or fails.
The AG Pro panel summarizes Flip State, Acceptance, Retest, Failure Risk, and Action.
🚦 Signals & States
• DEMAND → pivot-based demand zone mapped.
• SUPPLY → pivot-based supply zone mapped.
• DEMAND FLIP → old supply was broken and is being watched as new demand.
• SUPPLY FLIP → old demand was broken and is being watched as new supply.
• FLIP RETEST → price is interacting with the active flip zone.
• READY FLIP → retest acceptance reached the required score threshold.
• INVALIDATED → the active flip lost its invalidation edge.
• READY → qualified flip acceptance is active.
• MONITOR → the flip zone is active or retesting.
• WAIT → no qualified flip acceptance is active.
🔔 Alerts Logic
Demand Flip Locked triggers when price breaks above a prior supply zone.
Supply Flip Locked triggers when price breaks below a prior demand zone.
Demand Flip Acceptance Ready triggers when a bullish flip retest reaches the score threshold.
Supply Flip Acceptance Ready triggers when a bearish flip retest reaches the score threshold.
Supply Demand Flip Retest triggers when price interacts with the active flip zone.
Supply Demand Flip Invalidated triggers when the flip loses its invalidation shelf.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The strongest flip contexts appear when break strength, retest depth, wick response, close quality, source-zone quality, freshness, and relative volume align.
When a broken zone is retested cleanly and accepted from the opposite side, the score improves and the panel shifts toward a stronger action state.
📊 When to Use
• Support/resistance role reversal
• Breakout retests
• Trend continuation after zone breaks
• Failed range boundaries that become new reaction zones
• Markets with clear swing structure
⚠️ When NOT to Use
• Extremely noisy markets with weak pivot structure
• Very low liquidity symbols
• Markets with large spread or unreliable candles
• News spikes where zones break and fail too quickly
• Timeframes where pivot zones are too dense or too sparse
🎛️ Key Inputs
• Pivot Left / Right Bars → control how strict the source zone detection is.
• Zone Depth ATR → controls the thickness of supply and demand shelves.
• Break Buffer ATR → requires price to break beyond the source zone by a volatility-adjusted amount.
• Retest Window Bars → controls how long the flip remains relevant.
• Acceptance Buffer ATR → defines how much confirmation is required after retest.
• Invalidation Buffer ATR → controls the failure shelf beyond the flip zone.
• Minimum Ready Score → sets how strict READY labels should be.
• Visual Settings → control zones, labels, centered zone text, target rails, and right-side tags.
• Panel Settings → control panel visibility, location, theme, and font size.
🖥️ Interface & Visual Design
The interface is designed to make role-change structure readable without overwhelming the chart.
The active flip zone uses centered text so the purpose of the zone is immediately visible. Source zones are subtle, while READY labels and target rails stand out only when a valid acceptance context appears.
The panel gives a quick summary of the current flip state and risk context.
🧪 Practical Usage Workflow
1. Identify the latest supply and demand zones.
2. Wait for a zone to break and become a flip candidate.
3. Watch for retest interaction inside the flip zone.
4. Check the READY FLIP label and acceptance score.
5. Compare price with invalidation shelf and target rails.
6. Confirm broader trend, volatility, and liquidity before making decisions.
🔍 Interpretation Guidelines
A high acceptance score means the role-change reaction is cleaner according to the script's rules.
A pending retest means price has returned to the zone but has not yet shown enough acceptance.
A failed flip means price lost the invalidation edge and the role-change context should be treated as weakened.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not guarantee entries, exits, profits, or outcomes.
⚠️ Limitations & Transparency
Pivot-based zones are confirmed after the selected right-side bars, so source zones appear after confirmation.
Different timeframes can create very different supply and demand structures.
High volatility can cause quick break-and-fail behavior around zones.
No rule-based script can fully account for news, liquidity shocks, or sudden market structure changes.
🧠 Market Context Notes
Supply-demand flips are a form of role reversal.
Old resistance can become new support after acceptance. Old support can become new resistance after acceptance.
The script is strongest when used with broader market structure, trend context, liquidity, and volatility analysis.
🧾 Use Case Examples
When price breaks above a supply zone, returns to the zone, and holds above it with clean reaction quality, the script may mark a Demand Flip acceptance.
When price breaks below a demand zone, retests it from below, and rejects cleanly, the script may mark a Supply Flip acceptance.
🧱 System Philosophy
Supply Demand Flip Planner follows the AG Pro Series approach: transform a common market concept into a structured decision map with context, score, risk reference, and clean visuals.
The goal is not to replace judgment. The goal is to make role-change analysis easier to read.
🔐 Non-Promise Statement
No script can provide certainty.
No signal should be treated as guaranteed.
Outputs should always be interpreted with independent analysis and responsible risk control.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
This script is designed to help traders study how supply zones, demand zones, breakout retests, and role-change acceptance behave across different market conditions.
Penunjuk
Fair Value Gap Reclaim Planner [AGPro Series]Fair Value Gap Reclaim Planner
🧠 Core Idea
Has price returned into a fair value gap and reclaimed the imbalance midpoint with enough quality?
📌 Overview / What it does
Fair Value Gap Reclaim Planner is an imbalance-focused price action tool built around three-candle fair value gap structure.
The script detects bullish and bearish FVG zones, tracks fill progress, maps the midpoint, evaluates reclaim quality, and displays a structured 0-100 readiness score. It also projects an active reclaim corridor, invalidation shelf, target rails, labels, and a clean AG Pro dashboard.
It does not predict future price movement, automate entries, or provide guaranteed signals. It is a visual framework for reading fair value gap reclaim behavior.
🎯 Purpose & Design Philosophy
This script was built for traders who study imbalance zones but want a cleaner way to separate meaningful reclaim behavior from ordinary gap interaction.
Fair value gaps can attract attention, but not every touch matters. The planner focuses on whether price fills, reacts, and reclaims a meaningful reference level inside the imbalance.
The design supports patient analysis: identify the zone, measure the fill, wait for reclaim, then evaluate context.
⚡ Why This Script Is Different
Most FVG tools highlight many imbalance zones and leave the user to interpret the rest manually.
This script does NOT flood the chart with every historical imbalance.
Instead, it focuses on the active FVG context, tracks fill progress, evaluates midpoint or full-edge reclaim, and converts the reaction into a clear score and action state.
⚙️ Methodology
1. Context Detection
The script detects bullish and bearish three-candle fair value gaps using a minimum ATR-based size filter.
2. Reference Mapping
It maps the FVG top, bottom, midpoint, fill area, and invalidation boundary.
3. Reaction Evaluation
When price interacts with the active FVG, the script evaluates fill progress, reclaim distance, wick response, body quality, relative volume, gap quality, and freshness.
4. Visual Output
Qualified reclaim events are shown with labels, projected zones, target rails, right-side level tags, and a compact panel.
🗺️ How to Read the Chart
FVG Zone shows the active imbalance area.
Midline marks the primary reclaim reference when Midline mode is selected.
Fill Progress shows how deeply price has returned into the imbalance.
READY FVG RECLAIM labels mark reclaim events that meet the selected score threshold.
Invalidation Shelf marks the area where the reclaim context weakens or fails.
The AG Pro panel summarizes Gap State, Reclaim Score, Fill Progress, Risk, and Action.
🚦 Signals & States
• BULL FVG → bullish fair value gap detected and locked.
• BEAR FVG → bearish fair value gap detected and locked.
• READY FVG RECLAIM → price reclaimed the selected FVG reference with enough quality.
• FVG TOUCH → price interacted with the active FVG zone.
• INVALIDATED → the active reclaim context lost the opposite FVG edge.
• READY → a qualified reclaim event is active.
• MONITOR → the active FVG is being tested or a reclaim context remains open.
• WAIT → no qualified reclaim event is active.
🔔 Alerts Logic
Bullish FVG Reclaim Ready triggers when price reclaims the selected FVG reference upward with enough score quality.
Bearish FVG Reclaim Ready triggers when price reclaims the selected FVG reference downward with enough score quality.
FVG Touch triggers when price interacts with the active imbalance zone.
FVG Reclaim Invalidated triggers when the active reclaim context loses the opposite FVG edge.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The strongest reclaim contexts appear when fill progress, wick response, close quality, relative volume, gap size, and freshness align.
When price returns into the imbalance, respects the zone, and reclaims the midpoint or edge with clean reaction quality, the score improves.
📊 When to Use
• Markets with visible imbalance behavior
• Breakout pullbacks into fair value gaps
• Trend continuation reviews
• Reclaim attempts after partial FVG fills
• Intraday or swing contexts where FVG zones remain meaningful
⚠️ When NOT to Use
• Very low liquidity markets
• Extremely noisy or illiquid symbols
• Markets with unreliable candles or volume
• Wide-spread conditions where small gaps are misleading
• News spikes where imbalance zones can be invalidated quickly
🎛️ Key Inputs
• Minimum FVG Size ATR → filters out tiny imbalance zones.
• Maximum FVG Age Bars → controls how long an FVG can remain active.
• Reclaim Reference → chooses midpoint reclaim or full-edge reclaim.
• Touch Lookback Bars → controls how recent the FVG interaction must be.
• Invalidation Buffer ATR → controls the risk shelf beyond the FVG edge.
• Minimum Ready Score → sets how strict READY events should be.
• Target Rails → control projected T1 and T2 levels.
• Label Settings → control label density, size, and spacing.
• Panel Settings → control panel visibility, location, theme, and font size.
🖥️ Interface & Visual Design
The interface is designed to show the active imbalance context without filling the chart with excessive historical zones.
The FVG zone, midline, fill meter, invalidation shelf, target rails, and panel are visually separated so the chart remains readable.
The goal is a premium first-glance layout: zone first, reclaim second, action state third.
🧪 Practical Usage Workflow
1. Check the panel for active Gap State.
2. Locate the FVG zone and midpoint.
3. Watch how deeply price fills the imbalance.
4. Evaluate READY FVG RECLAIM labels and score quality.
5. Compare price with the invalidation shelf and target rails.
6. Confirm broader structure before making decisions.
🔍 Interpretation Guidelines
A high reclaim score means the reaction is cleaner according to the script's rules.
A lower score means the reclaim may be weaker, late, noisy, or incomplete.
Fill progress is not a signal by itself. It becomes more meaningful when combined with reclaim quality and broader market context.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not guarantee entries, exits, profits, or outcomes.
⚠️ Limitations & Transparency
Fair value gap interpretation can vary across markets, sessions, and timeframes.
Some markets create many small gaps that may not carry meaningful context.
Volatility changes can make an active FVG less relevant over time.
No rule-based script can fully account for news, liquidity shocks, or sudden market structure shifts.
🧠 Market Context Notes
Fair value gaps often represent fast price displacement and temporary imbalance.
The reclaim of a midpoint or edge can help traders study whether the market is accepting or rejecting the imbalance area.
The script works best when combined with structure, liquidity, volatility, and trend context.
🧾 Use Case Examples
When a bullish FVG forms after displacement, price returns into the zone, partially fills it, and then reclaims the midpoint, the script may mark a bullish reclaim context.
When a bearish FVG forms after downside displacement, price retraces into the imbalance and then rejects back below the midpoint, the script may mark a bearish reclaim context.
🧱 System Philosophy
Fair Value Gap Reclaim Planner follows the AG Pro Series approach: turn a popular market concept into a structured decision map with context, score, risk reference, and clean visuals.
It is designed to support judgment, not replace it.
🔐 Non-Promise Statement
No script can provide certainty.
No signal should be treated as guaranteed.
Outputs should always be interpreted with independent analysis and responsible risk control.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
This script is designed to help traders study how fair value gap fills, midpoint reclaims, and imbalance reactions behave across different market conditions.
Penunjuk
VWAP Pullback Reclaim Planner [AGPro Series]VWAP Pullback Reclaim Planner
🧠 Core Idea
Has price pulled back into VWAP and reclaimed it with enough quality to deserve attention?
📌 Overview / What it does
VWAP Pullback Reclaim Planner is a volume-weighted price action tool designed to evaluate pullbacks around VWAP and highlight reclaim conditions with a structured readiness score.
The script maps VWAP, a pullback pocket, reclaim corridors, invalidation shelves, target rails, labels, and a compact AG Pro dashboard. It focuses on whether price has moved away from VWAP, reacted, and returned through the reference with enough quality.
It does not predict future price movement, automate trading, or provide buy/sell commands. It is a visual decision-support framework for reading VWAP reclaim context.
🎯 Purpose & Design Philosophy
This script was built for traders who use VWAP as a live market reference but need more structure than a single line on the chart.
Many VWAP tools show the average price only. This planner adds context: pullback depth, reclaim quality, reaction strength, room, invalidation, and next-action state.
The design philosophy is simple: make VWAP reclaim situations easier to read without turning them into mechanical signals.
⚡ Why This Script Is Different
Most tools focus on plotting VWAP as a static benchmark.
This script does NOT treat every VWAP touch as meaningful.
Instead, it waits for a pullback, checks reclaim behavior, scores the reaction, and then presents the result through zones, labels, target rails, and a clear READY / MONITOR / WAIT / INVALIDATED state.
⚙️ Methodology
1. Context Detection
The script builds an anchored VWAP from the selected anchor mode and monitors price distance from that volume-weighted reference.
2. Reference Mapping
It creates a VWAP pullback pocket using ATR depth so the zone adapts to current volatility.
3. Reaction Evaluation
When price reclaims VWAP after a pullback, the script evaluates close distance, wick response, body quality, relative volume, VWAP slope alignment, and freshness.
4. Visual Output
Qualified events are shown with reclaim labels, a reclaim corridor, invalidation shelf, target rails, right-side tags, and a panel summary.
🗺️ How to Read the Chart
VWAP line shows the active volume-weighted reference.
The shaded pocket around VWAP marks the pullback area where reaction quality is evaluated.
READY RECLAIM labels highlight reclaim events that pass the selected score threshold.
The reclaim corridor shows the active continuation area after a valid reclaim.
The invalidation shelf marks where the reclaim context weakens.
The AG Pro panel summarizes VWAP State, Reclaim Score, Pullback Quality, Room, and Action.
🚦 Signals & States
• READY RECLAIM → price reclaimed VWAP after a pullback with enough quality.
• VWAP PULLBACK → price is inside or beyond the pullback pocket and may deserve monitoring.
• INVALIDATED → an active reclaim context lost its invalidation shelf.
• READY → a qualified reclaim event is active.
• MONITOR → a reclaim or pullback context is active but not a fresh ready event.
• WAIT → no actionable VWAP reclaim context is active.
• BLOCKED → VWAP or volatility context is not valid enough for evaluation.
🔔 Alerts Logic
Bullish VWAP Reclaim Ready triggers when price reclaims VWAP upward after a valid pullback and score threshold is met.
Bearish VWAP Reclaim Ready triggers when price reclaims VWAP downward after a valid pullback and score threshold is met.
VWAP Pullback Watch triggers when price enters the pullback evaluation area.
VWAP Reclaim Invalidated triggers when an active reclaim loses its invalidation shelf.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The strongest contexts appear when pullback freshness, VWAP reclaim, wick response, close strength, relative volume, and VWAP slope alignment support the same direction.
When these factors align, the score improves and the panel shifts toward a clearer action state.
📊 When to Use
• Intraday sessions where VWAP is actively watched
• Trend pullbacks around a volume-weighted mean
• Post-move reclaim attempts after sharp reactions
• Markets with enough liquidity for VWAP to be meaningful
• Breakout continuation and mean-reclaim review
⚠️ When NOT to Use
• Very low liquidity markets
• Extremely noisy symbols with unreliable volume
• Markets with wide spread or thin candles
• News-driven spikes where VWAP context can change too quickly
• Symbols where volume data is missing or distorted
🎛️ Key Inputs
• Anchor Mode → controls whether VWAP resets by session, week, or month.
• Pullback Pocket Depth → changes how wide the VWAP pullback area becomes.
• Reclaim Buffer → requires price to reclaim beyond VWAP by a volatility-adjusted amount.
• Invalidation Shelf → controls the risk shelf after reclaim.
• Minimum Ready Score → sets how strict READY labels should be.
• Target Rails → control the projected T1 and T2 reference levels.
• Label Settings → control density, size, spacing, and visual clarity.
• Panel Settings → control panel visibility, location, theme, and font size.
🖥️ Interface & Visual Design
The interface is designed to keep the chart readable while still feeling premium and informative.
The panel provides the current state at a glance. Labels mark important reclaim events. Zones and rails show context without overwhelming the candles.
The visual hierarchy is built around VWAP first, reclaim quality second, and action state third.
🧪 Practical Usage Workflow
1. Read the panel state.
2. Check whether price is near the VWAP pullback pocket.
3. Look for READY RECLAIM labels and score quality.
4. Compare price with the reclaim corridor, invalidation shelf, and target rails.
5. Confirm the broader market structure before making any decision.
🔍 Interpretation Guidelines
A high score means the reclaim structure is cleaner according to the script's rules.
A low or missing score means the reclaim context is incomplete, weak, or not currently active.
The script is best interpreted with trend, liquidity, volatility, and higher-timeframe structure.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a financial advisor.
It is not an automated trading system.
It does not guarantee entries, exits, profits, or outcomes.
⚠️ Limitations & Transparency
VWAP behavior can differ across symbols, sessions, and timeframes.
Volume quality matters. If volume data is unreliable, VWAP interpretation may weaken.
Fast volatility expansion can invalidate reclaim context quickly.
No rule-based tool can fully account for market news, liquidity shocks, or sudden structural changes.
🧠 Market Context Notes
VWAP often acts as a live reference for institutional positioning, intraday fairness, and reaction quality.
However, VWAP should not be read alone. The best use comes from combining VWAP reclaim structure with liquidity, trend, volatility, and support/resistance context.
🧾 Use Case Examples
When price pulls below VWAP, rejects lower prices, and reclaims VWAP with strong close quality, the script may mark a bullish reclaim context.
When price pushes above VWAP, fails to hold, and reclaims downward with strong reaction quality, the script may mark a bearish reclaim context.
🧱 System Philosophy
VWAP Pullback Reclaim Planner follows the AG Pro Series approach: convert a market concept into a structured decision map with context, score, risk reference, and visual clarity.
The goal is not to replace judgment. The goal is to make judgment easier.
🔐 Non-Promise Statement
No script can provide certainty.
No signal should be treated as guaranteed.
Outputs should always be interpreted with independent analysis and risk control.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
This script is designed to help traders study how VWAP pullbacks, reclaim attempts, and reaction quality behave across different market conditions.
Penunjuk
Donchian Retest Readiness [AGPro Series]# Donchian Retest Readiness
🧠 Core Idea
After price breaks a Donchian Channel boundary, is the broken edge ready to act as a clean retest and continuation reference?
📌 Overview / What it does
Donchian Retest Readiness is a breakout-boundary decision-support script built around Donchian Channels.
The script maps the rolling Donchian high, low, and midpoint, detects channel breaks, builds a retest pocket around the broken edge, scores retest quality from 0 to 100, and projects continuation lanes with target rails.
It does not predict price direction, automate trades, or provide guaranteed signals. It organizes Donchian break context, retest quality, channel edge, risk, and action state into a clean visual workflow.
🎯 Purpose & Design Philosophy
Many breakout tools mark the moment price leaves a range, but the difficult part often comes after the break: deciding whether the broken edge is being respected.
This script was built for traders who want to evaluate Donchian breakout retests without treating every new high or new low as a complete trading idea.
The design supports structured observation: break first, retest pocket second, hold quality third.
⚡ Why This Script Is Different
Most Donchian tools focus on channel highs and lows.
This script does NOT stop at drawing the Donchian Channel.
Instead, it converts the broken channel edge into a decision zone, evaluates whether price returns to that area, measures hold quality, and summarizes readiness with a clear 0-100 score.
⚙️ Methodology
1. Donchian Channel Mapping
2. Breakout Boundary Detection
3. Retest Pocket Construction
4. Hold / Failure Evaluation
5. 0-100 Retest Readiness Score
6. Panel And Alert Output
🗺️ How to Read the Chart
The Donchian Channel shows the rolling high, low, and midpoint.
The retest pocket appears around the broken channel edge after a breakout.
READY RETEST labels appear when price interacts with the broken edge and holds with enough quality.
Continuation lanes and target rails show the projected area beyond the accepted retest context.
The panel summarizes Break State, Retest Score, Channel Edge, Risk, and Action.
🚦 Signals & States
• READY → A qualified Donchian retest has formed.
• MONITOR → A Donchian break is active and retest behavior is being evaluated.
• WAIT → The channel is valid, but no active break / retest context is present.
• INVALIDATED → Price failed back through the broken channel edge.
• BLOCKED → The Donchian channel is not suitable for evaluation under current settings.
🔔 Alerts Logic
Bullish Donchian Retest Ready triggers when price breaks above the Donchian high, returns to the broken edge, and holds with enough score quality.
Bearish Donchian Retest Ready triggers when price breaks below the Donchian low, returns to the broken edge, and holds with enough score quality.
Donchian Break Watch alerts mark the first boundary break when enabled.
Donchian Retest Invalidated triggers when price fails back through the broken edge.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The retest score combines wick response, close pressure beyond the broken edge, proximity to the retest pocket, breakout impulse, relative volume, and channel width quality.
When several of these conditions align, the retest context becomes stronger.
📊 When to Use
• Breakout markets
• Trend continuation setups
• Pullbacks after new highs or new lows
• Donchian Channel structure analysis
• Intraday or swing contexts where retest behavior matters
⚠️ When NOT to Use
• Very low-liquidity symbols
• Extremely noisy chop
• Abnormal spread conditions
• News spikes where retest behavior is unstable
• Markets where every boundary break immediately reverses
🎛️ Key Inputs
• Donchian Length → controls the rolling channel high and low.
• ATR Length → controls retest pocket depth, buffers, targets, and label spacing.
• Minimum Channel Width → blocks weak channels that are too narrow.
• Retest Pocket ATR → controls how wide the broken-edge retest pocket is.
• Minimum Ready Score → controls how selective READY states are.
• Projection Bars → controls how far pockets and targets extend.
• Visual settings → control channel, fill, pocket, lane, labels, tags, and panel.
🖥️ Interface & Visual Design
The script uses a clean AG Pro panel to summarize the current Donchian context.
The visual hierarchy is designed to keep the channel visible while making the active retest pocket and READY label easy to see.
Default settings keep failed and early watch labels off so publication screenshots remain clean.
🧪 Practical Usage Workflow
1. Read the panel state.
2. Check the Donchian channel boundary.
3. Wait for a break and retest pocket.
4. Evaluate whether price holds the broken edge.
5. Review target rails and failure risk.
🔍 Interpretation Guidelines
A READY retest means the broken Donchian edge is being respected according to the script rules.
It does not mean price must continue.
An invalidated retest means price failed back through the broken edge and the breakout context lost quality.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a buy or sell signal generator.
It is not an automated trading system.
It does not guarantee breakouts, continuation, or reversals.
⚠️ Limitations & Transparency
Donchian behavior can vary by symbol, timeframe, volatility, and liquidity.
Shorter timeframes may produce more noise.
Longer Donchian lengths may react more slowly.
The script should be interpreted within broader structure, market regime, and risk context.
🧠 Market Context Notes
Donchian edges often become meaningful when market participants react to new highs, new lows, and breakout continuation attempts.
The strongest contexts usually combine a clean boundary break, controlled retest, and enough continuation room.
🧾 Use Case Examples
When price breaks above the Donchian high and later retests the broken edge without closing back through it, the script may mark a bullish READY RETEST.
When price breaks below the Donchian low and retests the edge from below with enough quality, the script may mark a bearish READY RETEST.
When price breaks out and then closes back through the broken edge, the retest can become invalidated.
🧱 System Philosophy
This script follows the AGPro Series approach: structured context, practical scoring, clean visuals, and decision-support states instead of noisy prediction claims.
🔐 Non-Promise Statement
No script can provide certainty.
No output should be treated as guaranteed.
All states are rule-based analytical markers.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own decisions, risk management, and position sizing.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
The purpose of this script is to help users study Donchian Channel breakout and retest behavior through a structured visual framework.
Penunjuk
Keltner Squeeze Release Planner [AGPro Series]# Keltner Squeeze Release Planner
🧠 Core Idea
Is volatility compression turning into a clean Keltner Channel release, or is price still trapped inside the squeeze?
📌 Overview / What it does
Keltner Squeeze Release Planner is a volatility compression and expansion decision-support script built around Keltner Channels.
The script detects compressed Keltner width, evaluates whether price releases beyond the channel with enough expansion quality, scores the release from 0 to 100, and maps an expansion corridor with target rails and failure context.
It does not predict price direction, automate trading, or provide guaranteed signals. It organizes squeeze, release quality, volatility rank, direction bias, and action state into a cleaner workflow.
🎯 Purpose & Design Philosophy
Many traders can see a breakout after it happens, but the difficult part is separating real volatility expansion from a weak push outside the channel.
This script was built for traders who want a structured way to read Keltner squeeze behavior, release strength, and early failure risk.
The design supports patience during compression and cleaner observation when price finally leaves the channel.
⚡ Why This Script Is Different
Most Keltner tools draw the channel and leave interpretation to the user.
This script does NOT treat every channel break as meaningful.
Instead, it evaluates compression depth, expansion ratio, close pressure, candle body quality, relative volume, and basis slope before marking a release as READY.
⚙️ Methodology
1. Keltner Channel Mapping
2. Compression Detection
3. Release Edge Evaluation
4. Expansion Quality Scoring
5. Corridor And Failure Mapping
6. Panel And Alert Output
🗺️ How to Read the Chart
The Keltner Channel shows the active volatility envelope around price.
Compression shading marks periods where channel width is low relative to recent history.
BULL RELEASE and BEAR RELEASE labels appear when price leaves the channel with enough release quality.
The release corridor projects possible expansion space after a qualified release.
The panel summarizes Squeeze, Release Score, Volatility, Direction Bias, and Action.
🚦 Signals & States
• READY → A qualified Keltner squeeze release has formed.
• MONITOR → A release context is active and should be observed.
• WAIT → Compression may exist, but release quality is not confirmed.
• INVALIDATED → A release failed back into the channel context.
• BLOCKED → The script cannot define a valid Keltner context.
🔔 Alerts Logic
Bullish Keltner Squeeze Release Ready triggers when price releases above the upper Keltner Channel after compression with enough score quality.
Bearish Keltner Squeeze Release Ready triggers when price releases below the lower Keltner Channel after compression with enough score quality.
Keltner Compression Active triggers when channel width is low enough to qualify as squeeze context.
Keltner Squeeze Release Failed triggers when an active release loses quality and moves back into the failure area.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The release score combines compression depth, expansion ratio, close pressure beyond the channel, candle body quality, relative volume, and basis slope.
When these conditions align, the release context becomes stronger.
📊 When to Use
• Markets moving from low volatility to expansion
• Breakout environments
• Consolidation-to-trend transitions
• Intraday or swing contexts where volatility contraction matters
⚠️ When NOT to Use
• Extremely illiquid symbols
• Random high-noise chop
• News spikes with unstable spreads
• Symbols where Keltner width is distorted by abnormal candles
🎛️ Key Inputs
• Keltner Basis Length → controls the EMA basis of the channel.
• ATR Length → controls channel width and volatility normalization.
• Keltner ATR Multiplier → adjusts how wide the channel is.
• Squeeze Threshold → defines how deep compression must be.
• Minimum Ready Score → controls how selective READY releases are.
• Projection Bars → controls how far the corridor extends.
• Visual settings → control labels, channels, zones, panel, and chart density.
🖥️ Interface & Visual Design
The script uses a compact AG Pro panel to make the current state readable at a glance.
The visual hierarchy is designed to keep the chart clean: channel context first, release label second, corridor and targets third.
Default settings are tuned for readable publication screenshots without hiding the core volatility story.
🧪 Practical Usage Workflow
1. Read the panel state.
2. Check whether compression is active.
3. Wait for a qualified release label.
4. Review the corridor and target rails.
5. Watch whether price holds or fails back into the channel.
🔍 Interpretation Guidelines
A READY release means volatility expansion conditions aligned according to the script rules.
It does not mean price must continue.
A weak or failed release means the channel break lost quality and should be interpreted within broader market context.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a buy or sell signal generator.
It is not an automated trading system.
It does not guarantee breakouts, continuation, or reversals.
⚠️ Limitations & Transparency
Keltner behavior can change across symbols, sessions, and timeframes.
Compression may last longer than expected.
Strong news events can create release signals that behave differently from normal volatility expansion.
The script should be used with broader structure, liquidity, and risk context.
🧠 Market Context Notes
Keltner squeeze behavior is most useful when volatility has contracted enough to create a visible transition point.
The best contexts often combine compression, clean channel release, participation, and enough room for expansion.
🧾 Use Case Examples
When price compresses inside the Keltner Channel and then closes beyond the upper band with strong expansion, the script may mark a bullish release.
When price breaks below the lower band after compression and the release score is strong enough, the script may mark a bearish release.
When price breaks out but quickly moves back into the channel, the release can lose quality.
🧱 System Philosophy
This script is part of the AGPro Series approach: clean visual context, practical scoring, and decision-support states instead of noisy prediction labels.
🔐 Non-Promise Statement
No script can provide certainty.
No signal should be treated as guaranteed.
All outputs are rule-based analytical markers.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own decisions, risk management, and position sizing.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
The purpose of this script is to help users study volatility compression and release behavior through a structured Keltner Channel framework.
Penunjuk
