Mulakan

Cari dalam skrip untuk "trendline"

Linear Average PriceWhat is "Linear Average Price"? "Linear Average Price" is both a trend and an overbought oversold indicator . What it does? it creates a trendline and trading zones. How it does it? To create the trend line, it averages the difference between each data and chooses it as the slope of the line it creates. then it positions this line so that it passes right through the middle of the data at hand. It uses standard deviation to create trading zones. How to use it? It can be used both to have an idea about the trend direction and to determine buy-sell zones. You can choose how many candles the indicator will calculate from the "lenght" section. The "range" part is the coefficient of the standard deviation and can be used to expand or collapse zones.
Penunjuk Pine Script®
oleh faytterro
2
Price action: Trendline Break StrategyThis strategy use trendline to entry. Trendline be drawed from Pivots High/Low. Entry Long: When price break up trendline. Entry Short: When price break down trendline. Risk:Reward setup is 1:1. You can backtest with whichever pair and whichever timeframe. I backtested: - If scalping: should use timeframe 5m, set up SL, TP is 2%. - If swing trade: should use timeframe 1H, set up SL 2%, TP is 3%. Should use with other indicator to increase winrate.
Strategi Pine Script®
oleh TrendCrypto2022
11
ATR Based Trendlines - JDThis script draws trendlines from the pivot points in the price chart. The angle of the trendlines is determined by (a percentage of) the atr. The angle follows the change in price, dictated by the atr at the moment where the pivot point is detected. The atr percentage determines if the trendline follows the rate of change of the atr or a fraction ( value < 100) or a multiple ( value > 100) of that JD. #NotTradingAdvice #DYOR Disclaimer. I AM NOT A FINANCIAL ADVISOR. THESE IDEAS ARE NOT ADVICE AND ARE FOR EDUCATION PURPOSES ONLY. ALWAYS DO YOUR OWN RESEARCH!
Penunjuk Pine Script®
oleh Duyck
18
NCL Noise FilterOne of our Favorite Indicators - the NeoChartLabs Noise Filter. FILTER OUT THE NOISE and focus on the moves that matter, toggle the settings to match your preference. Or switch the Duration Setting to Institutional on a high timeframe (1W+) to locate great spot buying opportunities near cycle tops and bottoms. Volume Filter: The volume filter automatically turns OFF when you switch to Major Macro Cycle or Institutional Baseline, as those high-timeframe structural breaks are often valid even on lower relative volume. You can change the volume requirement by checking the volume of the current breakout bar against its Relative Volume (RVOL) - A setting of 0 turns this OFF. A common professional standard is to require the breakout volume to be at least 1.5x to 2x higher than the 20-period average volume. *we recommend using a higher volume setting on low timeframes under the 4HR to reduce false signals. MTF Filter: *we recommend to set at least 1 timeframe above your trade (i.e if you enter on the 2hour set to the 4 hour) It prevents entering trades that are essentially minor pullbacks in a much larger opposing trend. By integrating a higher timeframe EMA (e.g., a 200-period EMA from a 4x higher timeframe), you can filter out counter-trend trades that have a higher probability of failing. ATR Filter: Filters "Fake-Outs": It forces the price to not just "touch" the trendline, but to break it with enough force to clear the current average volatility. Adaptive: Unlike a fixed pip/dollar amount, the ATR adjusts to the asset. On Bitcoin, the threshold might be $500; on a penny stock, it might be $0.05. Bullish Cross: The price must close above the support trendline + (0.5 * ATR). Bearish Cross: The price must close below the resistance trendline - (0.5 * ATR). MACD Filter: Bullish Crosses require the MACD Histogram to be increasing (showing positive momentum acceleration). Bearish Crosses require the MACD Histogram to be decreasing (showing negative momentum acceleration). RSI Filter: Bullish Breakout (Cross of the lower/support trendline): You would want the RSI to be rising or above 50, showing that buyers are in control. Bearish Breakdown (Cross of the upper/resistance trendline): You would want the RSI to be falling or below 50, showing sellers are in control. Market Structure Shifts (CHoCH) - identifying Trends with bullish/bearish dashed horizontal lines for each CHoCH providing a cleaner visualization of the support or resistance level that price has just violated. Duration Table for 1Week Charts Trading Style Fractal Length (p) Pattern Span Confirmation Delay Standard Swing 2 5 Weeks 2 Weeks Intermediate Trend 5 11 Weeks 5 Weeks Major Macro Cycle 10–20 21–41 Weeks 10–20 Weeks Institutional Baseline 44 ~2 Years ~10 Months
Penunjuk Pine Script®
oleh NeoChartLabs
Adaptive Trend Mapper-ATM (Arjo)Adaptive Trend Mapper (ATM) is a multi-factor trend, momentum, and compression-analysis tool designed to help traders visually map the strength and direction of market pressure. Instead of simply combining existing indicators, ATM creates a new composite framework that blends momentum imbalance, directional strength, volatility contraction, and adaptive smoothing into a single, unified model. Originality and usefulness Adaptive Trend Mapper (ATM) does not replicate any one indicator. It generates two custom indices— Bull Pressure Index and Bear Pressure Index —derived from a mathematical combination of RSI, inverse-RSI, and ADX. These indices behave differently from traditional oscillators: They represent directional pressure on a 0–100 scale , not momentum. They are designed to converge/diverge, forming a basis for the built-in Squeeze Detection Engine. They can be optionally step-compressed , making the movement easier to read on fast or small charts. The script also integrates a custom SuperSmoother trend model (not TradingView’s built-in function), which acts as an adaptive trend curve on the chart. All calculations are combined intentionally—not as a mashup—to create a framework that allows traders to understand trend strength, compression phases, and micro-trend shifts in one place. How the Indicator Works 1. Bull & Bear Pressure Indices: These indices measure directional imbalance: Bull Index = ADX strength weighted against inverse-RSI Bear Index = ADX strength weighted against normal RSI This produces two opposing pressure curves that rise or fall depending on whether buyers or sellers dominate. You can optionally smooth these using: SMA / EMA / WMA / RMA via the “Smoothing Settings” panel. 2. Squeeze & Compression Detection: A squeeze is detected when: ADX stays below a user-defined threshold Bull–Bear Index difference shrinks Average difference is falling (convergence) This is a volatility-contraction model inspired by squeeze logic but applied to directional pressure, not Bollinger Bands/Keltner Channels . 3. Adaptive Trend Curve (SuperSmoother Engine) The indicator applies a two-pole SuperSmoother filter to the price, then smooths it again using EMA. The slope color flips between bullish and bearish and is displayed using: A thin SuperSmoother curve A thicker band for visual context 4. EMA-50 Trend Context: An optional EMA-50 helps identify broad directional bias . 5. Step-Based Scaling You can quantize the Bull/Bear indices using custom step intervals. This makes the indicator easier to read on noisy intraday charts. How to Use the Indicator 1. Trend Analysis A rising Bull Index shows strengthening upward pressure A rising Bear Index shows strengthening downward pressure Wide divergence between the indices signals a strong trend 2. Compression / Squeeze Analysis Yellow background = volatility compression + pressure convergence Breakouts from this zone often precede directional expansion 3. Trendline Reading SuperSmoother line color flip = micro trend shift EMA-50 slope gives macro-trend direction Perfect for combining trend and momentum maps on the same chart 4. Visual Interpretation Cyan/teal → strong bullish pressure Purple/red/orange → various levels of bearish control Neutral/teal background → weak ADX Yellow background → squeeze zone Open-Source Notes This script uses: TradingView built-in RSI, ADX/DMI, and smoothing functions A SuperSmoother implementation based on known DSP filter coefficients All remaining logic, signal methods, composite indices, and compression model are original developments by ARJO . The script is published open-source to comply with TradingView’s reuse policy. Disclaimer This tool is for educational and analytical purposes only. It does not generate buy or sell signals. Always use proper risk management. Happy Trading (ARJO)
Penunjuk Pine Script®
oleh ARJO_2019
ZynAlgo TrendlinePurpose ZynAlgo Trendline V2.0 is a trend-following indicator designed to help traders visually identify market direction, momentum alignment, and dynamic risk zones. It combines multiple moving averages, multi-timeframe analysis, and slope validation to show when a market is trending, ranging, or reversing. How It Works — Conceptual Breakdown 🔹 1. Trendline Framework (Three-Layer MA System) The indicator plots three moving-average layers: Type 1 Line – Fast MA for early trend detection Type 2 Line – Medium MA as a stability filter Trendline (200-period) – Long-term structural baseline When all three are properly stacked and sloped, a directional bias is confirmed: Bullish → Type 1 > Type 2 > Trendline Bearish → Type 1 < Type 2 < Trendline Sideways → Misaligned or flat Users can select from SMA, EMA, WMA, RMA, SWMA, ALMA, VWAP, fully adjustable to match their style. 🔹 2. Touch-and-Confirm Entry Logic Entries are visualized only when: Price touches the selected confirmation line (Trendline, Type 1 or Type 2), and The direction is re-confirmed within a given number of candles (confirmation window). You can choose between: Fixed Mode — confirmation only on the exact N-th candle after touch. Interval Mode — confirmation allowed anytime within N candles after touch. This method ensures signals only appear when structure and timing both align — reducing false momentum entries. 🔹 3. Multi-Timeframe Trend Filter (MTF Filter) The indicator checks trend direction across up to 8 higher timeframes (5 min → Daily). A signal is valid only if a chosen minimum number of those timeframes confirm the same direction. This feature creates cross-timeframe confluence, helping users avoid counter-trend setups. 🔹 4. Slope-Based Market Filter To prevent entries in sideways or choppy markets, the system verifies: Each MA’s slope is above a user-defined threshold. MAs are sufficiently spaced apart (using percentage-of-price separation). When conditions are met, candles are color-coded: 🟩 Uptrend 🟥 Downtrend ⬜ Sideways/No-trade zone. This gives immediate visual feedback about current market structure. 🔹 5. Dynamic Risk Management System Choose among three Stop-Loss modes: Structure-Based – Swing high/low referencing market structure. MA-Based – Uses the selected moving-average line as a dynamic stop. ATR-Based – Volatility-adaptive stop (default). Each entry automatically projects up to three Take-Profit (TP1-TP3) levels using user-defined Risk-to-Reward ratios. Lines and labels are plotted for Entry, SL, and each TP with optional persistence control (“keep old lines” setting). 🔹 6. Anti-Martingale / Cooldown Logic A built-in cooldown timer ensures only one trade setup per cycle — new signals pause until the prior trade has reached either TP or SL. This mechanism prevents overlapping trades and unwanted martingale-style stacking. 🔹 7. Compact On-Chart Dashboard A small table (top-right corner) summarizes: Current position (LONG / SHORT / FLAT) SL mode in use Confirmation source Touch/confirmation mode Cooldown state and remaining bars This helps monitor settings without opening the menu. 🔹 8. Smart Alerts (Telegram / Discord / Both) When a new BUY ↗ or SELL ↘ confirmation occurs, the script can send structured alerts containing: Symbol Entry price TP1 – TP3 values Stop Loss Timestamp You can select the preferred platform (Telegram / Discord / Both). These alerts are optional and serve as notifications, not trade instructions. Usage Guide Trendline Length: Period of the main long-term moving average (default = 200). Higher = smoother, slower trendline. Trendline Type / Type 1 / Type 2 Type: Choose from SMA, EMA, WMA, RMA, SWMA, ALMA, VWAP depending on your preference for responsiveness or smoothness. Confirmation Source: Which MA must be touched by price to start a confirmation window (Trendline = conservative, Type 1 = frequent, Type 2 = balanced). Confirmation Window: Number of bars allowed for price to confirm direction after touch. Stop Loss Mode: Select ATR-based, structure-based, or MA-based stop visualization. R:R Ratios (TP1-TP3) Adjust distances for visual target levels based on risk-to-reward multiples. Enable MTF Filter: Require trend alignment across higher timeframes before showing a signal. Enable Slope Filter: Prevents signals when MAs are flat or overlapping (sideways market). Enable Candle Coloring: Colors candles by trend state for quick visual confirmation. How to Use Apply the indicator to a clean chart with no other overlays for clarity. Check candle color: Green → Uptrend; Red → Downtrend; Gray → Sideways. Wait for a “BUY ↗” or “SELL ↘” label to appear after a valid touch + confirmation sequence. Observe drawn lines: Entry = blue, SL = red, TP = green. Use displayed levels as visual references only. You may combine them with your own entry rules or strategy. Optional: enable the dashboard (top-right) to monitor trend filter states and settings in real time. ⛔ False-Signal Reduction Combining slope validation with multi-timeframe agreement filters out low-probability entries — useful for traders who prefer quality over quantity. 🧩 Professional Execution Layer Integrated Stop Loss / Take Profit projection, cooldown logic, and anti-martingale control give it a disciplined, rule-based behavior — a hallmark of algorithmic consistency. 📡 Automation-Ready Alerts The built-in Telegram / Discord alert module (JSON-formatted payloads) allows direct bot integration for remote monitoring — no additional coding required. Unlike public MA crossover scripts, ZynAlgo Trendline includes proprietary logic for slope-weighted alignment, MTF aggregation, and confirmation-window entry detection. 🔶 RISK DISCLAIMER Trading is risky & most day traders lose money. All content, tools, scripts, articles, & education provided by ZynAlgo are purely for informational & educational purposes only. Past performance does not guarantee future results.
Penunjuk Pine Script®
oleh ZynAlgo
4
FluxVector Liquidity Universal Trendline FluxVector Liquidity Trendline FFTL Summary in one paragraph FFTL is a single adaptive trendline for stocks ETFs FX crypto and indices on one minute to daily. It fires only when price action pressure and volatility curvature align. It is original because it fuses a directional liquidity pulse from candle geometry and normalized volume with realized volatility curvature and an impact efficiency term to modulate a Kalman like state without ATR VWAP or moving averages. Add it to a clean chart and use the colored line plus alerts. Shapes can move while a bar is open and settle on close. For conservative alerts select on bar close. Scope and intent • Markets. Major FX pairs index futures large cap equities liquid crypto top ETFs • Timeframes. One minute to daily • Default demo used in the publication. SPY on 30min • Purpose. Reduce false flips and chop by gating the line reaction to noise and by using a one bar projection • Limits. This is a strategy. Orders are simulated on standard candles only Originality and usefulness • Unique fusion. Directional Liquidity Pulse plus Volatility Curvature plus Impact Efficiency drives an adaptive gain for a one dimensional state • Failure mode addressed. One or two shock candles that break ordinary trendlines and saw chop in flat regimes • Testability. All windows and gains are inputs • Portable yardstick. Returns use natural log units and range is bar high minus low • Protected scripts. Not used. Method disclosed plainly here Method overview in plain language Base measures • Return basis. Natural log of close over prior close. Average absolute return over a window is a unit of motion Components • Directional Liquidity Pulse DLP. Measures signed participation from body and wick imbalance scaled by normalized volume and variance stabilized • Volatility Curvature. Second difference of realized volatility from returns highlights expansion or compression • Impact Efficiency. Price change per unit range and volume boosts gain during efficient moves • Energy score. Z scores of the above form a single energy that controls the state gain • One bar projection. Current slope extended by one bar for anticipatory checks Fusion rule Weighted sum inside the energy score then logistic mapping to a gain between k min and k max. The state updates toward price plus a small flow push. Signal rule • Long suggestion and order when close is below trend and the one bar projection is above the trend • Short suggestion and flip when close is above trend and the one bar projection is below the trend • WAIT is implicit when neither condition holds • In position states end on the opposite condition What you will see on the chart • Colored trendline teal for rising red for falling gray for flat • Optional projection line one bar ahead • Optional background can be enabled in code • Alerts on price cross and on slope flips Inputs with guidance Setup • Price source. Close by default Logic • Flow window. Typical range 20 to 80. Higher smooths the pulse and reduces flips • Vol window. Typical range 30 to 120. Higher calms curvature • Energy window. Typical range 20 to 80. Higher slows regime changes • Min gain and Max gain. Raise max to react faster. Raise min to keep momentum in chop UI • Show 1 bar projection. Colors for up down flat Properties visible in this publication • Initial capital 25000 • Base currency USD • Commission percent 0.03 • Slippage 5 • Default order size method percent of equity value 3% • Pyramiding 0 • Process orders on close off • Calc on every tick off • Recalculate after order is filled off Realism and responsible publication • No performance claims • Intrabar reminder. Shapes can move while a bar forms and settle on close • Strategy uses standard candles only Honest limitations and failure modes • Sudden gaps and thin liquidity can still produce fast flips • Very quiet regimes reduce contrast. Use larger windows and lower max gain • Session time uses the exchange time of the chart if you enable any windows later • Past results never guarantee future outcomes Open source reuse and credits • None
Strategi Pine Script®
oleh exlux
zavaUnni- Trendlines Pro & fibonacci Zones zavaUnni- Trendlines Pro & fibonacci Zones is a momentum-based trading tool that automatically detects pivot points to visualize real-time trendlines, zigzag structures, and Fibonacci retracement zones. Key Features 1. Divergence-Based Pivot Detection Utilizes popular momentum indicators like RSI, CCI, MACD CCI, OBV, etc. Automatically detects significant highs/lows based on divergence signals These pivot points are used to construct trendlines and calculate retracement zones 2. Automatic Fibonacci Retracement Zones Draws Fibonacci levels such as 0.382, 0.618, and 0.786 from detected pivot highs/lows Supports both initial fixed levels and dynamic updated zones based on live price action Recalculates zones automatically when specific price conditions are met 3. Supertrend-Based Zigzag and Trendlines detect real-time trend direction changes Plots zigzag lines between significant pivot highs/lows Automatically generates trendlines only when slope conditions are met (e.g., below -3° or above +1°) Invalidates and resets trendlines if broken or the slope becomes too flat/steep Settings Overview Index Selects the indicator (RSI, CCI, MACDcci, OBV, etc.) used for pivot detection zigzag Length Supertrend sensitivity period for direction changes Fibonacci_bg Toggle background color fill for Fibonacci zones Fibonacci_label Show labels for each Fibonacci level (23.6%, 38.2%, etc.) Bull Trend Line Color Color of upward trendlines Bear Trend Line Color Color of downward trendlines zigzag_color Color of the zigzag lines
Penunjuk Pine Script®
oleh zavaUnni
Adaptive Support & Resistance Levels [StabTrading]The Adaptive S&R Levels indicator is designed to study support and resistance levels by synthesizing multiple well-known techniques for identifying these zones. It aims to provide traders with reliable price levels that reflect the collective perspective of market participants, using historical price action and projective techniques for extreme conditions. 💡 Introduction: Identified Problem Traders often draw support and resistance lines using varied methods, leading to inconsistencies in where these levels are placed on charts. This variability can reduce the effectiveness of individual levels, as price may not react strongly to zones that lack broad recognition. The Adaptive S&R Levels indicator addresses this by aggressively averaging multiple established techniques to create support and resistance lines that align with what most traders are likely to identify, increasing the probability of price reactions. 🚀 How it Works: Overview The indicator employs a multi-technique algorithm to generate support and resistance levels, ensuring they represent a consensus of trader perspectives. 🚀 How it Works: Chart Levels Display and Styling Support levels, displayed in green below the current price, and resistance levels, shown in red above the price, are plotted clearly on the chart. Levels are numbered sequentially (e.g., v1, v2) as they move further from the current price, providing a visual hierarchy of proximity. Extreme levels, labeled as "Extreme Support" or "Extreme Resistance," are plotted in a bolder color to distinguish them as the outermost boundaries, maintaining the same green (support) and red (resistance) color scheme for consistency. 🚀 How it Works: Historical Price Action Algorithm For areas with available historical data, the algorithm analyzes price action using a variety of recognized methods for drawing support and resistance, such as pivot points, swing highs/lows, and volume-based zones. It calculates a weighted average of these techniques to produce a “regression fit” line that reflects the accumulation of levels traders might draw. By prioritizing areas where multiple methods converge, the indicator identifies zones likely to be significant to a wide audience, enhancing their relevance. 🚀 How it Works: Projective Techniques Algorithm In scenarios without recent historical price action—such as all-time highs or lows—the indicator employs an alternative algorithm that combines projective techniques commonly used by traders. These include Fibonacci extensions, Measured Moves (price projections), Psychological Milestones (e.g., round numbers), Channel/Trendline Extrapolation, and Time-Based Targets (inspired by methods like Gann techniques). The algorithm seeks a confluence of these methods to draw support and resistance levels that align with what most traders would consider significant in such conditions. These levels maintain the same green (support) and red (resistance) color scheme, with numbering based on their distance from the price. 🚀 How it Works: Noise Parameter Adjustment Users can adjust a noise parameter to control the number of displayed levels. Lower settings show more lines, reflecting a broader range of potential zones but with less confluence. Higher settings increase the required confluence of techniques, resulting in fewer lines that have a higher probability of eliciting a price reaction. This customization allows traders to tailor the indicator to their preferred timeframe or trading style. 🔥 Features Confluence-Based Levels: Support and resistance lines are derived from a weighted average of multiple techniques, aiming to mirror the levels most traders would recognize. Extreme Levels: Generates support and resistance in areas without historical price action, using techniques like Fibonacci extensions and Measured Moves. Color-Coded Display: Green support levels appear below the current price, and red resistance levels appear above, with extreme levels in a bolder shade for distinction. Adjustable Noise Parameter: Users can modify the confluence threshold to display more lines (lower settings) or fewer, higher-probability lines (higher settings). 📈 Implementing the System 1. Adjust Settings Set the noise parameter based on your trading style (0.1 to 10). Use lower values for more frequent levels, suitable for scalping or short-term analysis. Use higher values for fewer, higher-confluence levels, ideal for swing trading or longer-term strategies. Adjust for your timeframe: Settings tend to be lower on shorter timeframes and higher on longer timeframes. 2. Identify Levels Monitor green support levels below the price for potential buying zones, noting their numbered proximity (v1, v2, etc.). Observe red resistance levels above the price for potential selling or shorting zones, noting their numbered proximity. Note extreme levels (labeled "Extreme Support" or "Extreme Resistance") in areas like all-time highs, which may act as key reversal points. 3. Evaluate Price Reactions Track how price interacts with the plotted levels to assess their effectiveness, considering their proximity to price. Observe performance in bullish, bearish, or ranging markets to understand the indicator’s behavior at different levels. Test different noise parameter settings across various assets and timeframes to find the optimal balance for your approach. 4. Layering Trades with Levels Use the numbered levels to layer into a trade: for example, enter a partial position at a closer support level (e.g., v1) and add to it at a further level (e.g., v2) if price continues to decline, spreading risk across multiple zones. Layer out of a trade by taking partial profits at each resistance level as price rises (e.g., reduce position at v1, then v2), or fully exit at an "Extreme Resistance" level to maximize gains while managing exposure. 🔶 Conclusion The Adaptive S&R Levels indicator provides a framework for studying support and resistance by averaging multiple trader-recognized techniques. With its ability to handle both historical and extreme price scenarios, numbered levels for visual hierarchy, and customizable noise settings, it offers a versatile tool for analyzing key price levels. Designed for educational use, it encourages traders to test and observe how these consensus-driven levels align with market behavior within broader analysis.
Penunjuk Pine Script®
oleh StabTrading
Instantaneous Trendline with Cloud Instantaneous Trendline with Cloud Introduction & History The Instantaneous Trendline was introduced by John Ehlers, a well-known figure in the field of technical analysis, particularly for applying digital signal processing concepts to financial markets. Ehlers aimed to create an indicator that reacts to market price changes more quickly than traditional moving averages, yet remains smooth enough to avoid excessive noise. By incorporating concepts from digital filtering, he devised a formula that calculates a trendline with minimal lag—hence the term “instantaneous.” Purpose The primary purpose of the Instantaneous Trendline with Cloud is to provide traders and analysts with a responsive, smoothed line that closely follows market price movements. Additionally, this script enhances the visual cues by adding a cloud fill to highlight bullish and bearish zones: Trend Identification The ITL (Instantaneous Trendline) is plotted alongside the price. When price consistently stays above the ITL, it may signal an uptrend. Conversely, when price dips below the ITL, it can suggest a downtrend. Signal Generation Crossover points between the price and the ITL can serve as potential entry or exit signals. A bullish crossover (price moving above the ITL) often indicates the start of upward momentum, while a bearish crossover (price dropping below the ITL) may point to downward momentum. Noise Reduction By applying digital filtering concepts and smoothing through the alpha (smoothing coefficient), the ITL reduces noise while still responding relatively quickly to price changes. Traders can adjust alpha to make the trendline more reactive (higher alpha) or smoother (lower alpha). Clarity via Cloud Fill A color-coded cloud between the price and the ITL provides an at-a-glance view of market bias. The green cloud highlights potentially bullish phases, while the red cloud highlights potentially bearish phases. Experiment with the alpha value (commonly between 0.2 and 0.3) to find a balance that suits your preference for responsiveness versus smoothness. This indicator implements John Ehlers’ Instantaneous Trendline concept and plots a smoothed trendline (ITL) alongside the price. The trendline is controlled by a user-defined smoothing coefficient (alpha). A higher alpha makes the trendline respond more quickly to price changes, while a lower alpha produces a smoother line. A color-filled cloud helps traders identify bullish and bearish conditions: Green cloud if the price is above the ITL (bullish potential). Red cloud if the price is below the ITL (bearish potential). Key Benefits Trend Visualization: Quickly see if the market is in an uptrend or downtrend based on the position of the price relative to the trendline. Crossover Signals: Identify potential shifts in trend or momentum when the price crosses the ITL. Customizable Sensitivity: Adjust the alpha parameter to make the ITL more or less reactive to price moves. Use this tool to better visualize short-term trend changes and potential entry/exit signals in conjunction with other technical analysis methods.
Penunjuk Pine Script®
oleh Sesilya
MATRIX HMA Filters and TrendlinesThis update to the previous HMA-Kahlman Trend, Clipping & Trendlines script features the same structure with the three modules: - Trendlines module, - NEW Winsorizing submodule using difference-based filtering. - HMA-Kahlman Trend module. The Winsorizing submodule filters signals by a volume level, eliminating the ones with the volume below a threshold. This module substitutes the previous 'low-level' filtering implementation. This time it filters out based on difference between scaled volume and its moving average. Tested with BTCUSD . Esta atualização do script HMA-Kahlman Trend, Clipping & Trendlines anterior apresenta a mesma estrutura nos três módulos: - módulo Trendlines, - NOVO sub-módulo Winsorizing usando filtragem baseada em diferenças. - Módulo HMA-Kahlman Trend. O submódulo Winsorizing filtra sinais por um nível de volume, eliminando aqueles com o volume abaixo de um limite. Este módulo substitui a implementação de filtragem 'baixo nível' anterior. Dessa vez, ele é filtrado com base na diferença entre o volume escalado e sua média móvel. Testado com BTCUSD.
Penunjuk Pine Script®
oleh Tio_Patinhas_BR
9
Cnagda Trading ToolCnagda Trading Tools - complete set of intraday trading 1. Trendline breakout based On ATR. 2. Live RSI, volume/candle average 20 Periods, trend direction last 34 periods, and some useful dashboard features. 3. Ma Scalp Line provide trend support and resistance + Where Line More Flat Previous Time You Also Use That Range As Support And Resistance 4. RSI based POC ( Point Of Control) indicate high Volume Area like fixed Range Volume profile 5. London session breakout with buy/sell Signal and NewYork session opening half hour range breakout with Buy/sell signal Ma Scalp Buy And Sell Signal For Short term Scalping ( 5 Min Timeframe) Based on Ema And Wma Crossover I hope these tools will improve your trading, but you should trade only after proper research, this indicator is not responsible for any loss.
Penunjuk Pine Script®
oleh cnagda3
10
IsAlgo - Ultra Trend Strategy► Overview: The Ultra Trend strategy is designed to identify trend lines based on average price movement and execute trades when the price crosses the middle line, confirmed by an entry candle. This strategy combines ATR, Moving Averages, and customizable candlestick patterns to provide a versatile and robust trading approach. ► Description: The Ultra Trend strategy employs a multi-faceted approach to accurately gauge market trends and execute trades. It combines the Average True Range (ATR) with trendline analysis and Moving Averages, providing a comprehensive view of market conditions. The strategy uses ATR to measure market volatility and the average price movement, helping to set dynamic thresholds for trend detection and adapting to changing market conditions. The slope of the trend is calculated based on the angle of price movement, which aids in identifying the strength and direction of the trend. Additionally, a Moving Average is used to filter trades, ensuring alignment with the broader market direction and reducing false signals, thereby enhancing trade accuracy. Traders can configure the strategy to enter trades in the direction of the trend, against the trend, or both. This feature enhances the adaptability of the Ultra Trend strategy, making it suitable for various trading styles and market environments. ↑ Long Entry: A long trade is executed when the entry candle crosses and closes above the trend line. This indicates a bullish market condition, signaling an opportunity to enter a buy position. ↓ Short Entry: A short trade is executed when the entry candle crosses and closes below the trend line. This indicates a bearish market condition, signaling an opportunity to enter a sell position. ✕ Exit Conditions: The strategy offers multiple stop-loss options to manage risk effectively. Traders can set stop-loss levels using fixed pips, ATR-based calculations, the higher/lower price of past candles, or close a trade if a candle moves against the trade direction. Up to three take profit levels can be set using methods such as fixed pips, ATR, and risk-to-reward ratios. This allows traders to secure profits at various stages of the trade. A trailing stop feature adjusts the stop loss as the trade moves into profit, locking in gains while allowing the trade to continue capturing potential upside. Additionally, a break-even feature moves the stop loss to the entry price once a certain profit level is reached, protecting against losses. Trades can also be closed when a trend change is detected or when a candle closes outside a predefined channel, ensuring that positions are exited promptly in response to changing market conditions. ► Features and Settings: ⚙︎ Trend: Users can configure the trend direction, length, factor, and slope, allowing for precise control over how trends are identified and followed. ⚙︎ Moving Average: An Exponential Moving Average (EMA) can be employed to confirm the trend direction indicated by the trend lines. This provides further assurance that the trend line breakout is not a false signal. The EMA can be enabled or disabled based on user preference. ⚙︎ Entry Candle: The entry candle is the candle that breaks the trend line, signaling an entry opportunity. Users can specify the minimum and maximum size of the candle's body and the ratio of the body to the entire candle size. This ensures that only significant breakouts trigger trades. ⚙︎ Trading Session: This feature allows users to define specific trading hours during which the strategy should operate, ensuring trades are executed only during preferred market periods. ⚙︎ Trading Days: Users can specify which days the strategy should be active, offering the flexibility to avoid trading on specific days of the week. ⚙︎ Backtesting: Enables a backtesting period during which the strategy can be tested over a selected start and end date. This feature can be deactivated if not needed. ⚙︎ Trades: This includes configuring the direction of trades (long, short, or both), position sizing (fixed or percentage-based), the maximum number of open trades, and limitations on the number of trades per day or based on trend. ⚙︎ Trades Exit: The strategy offers various exit methods, such as setting profit or loss limits, specifying the duration a trade should remain open, or closing trades based on trend reversal. ⚙︎ Stop Loss: Various stop-loss methods are available, including a fixed number of pips, ATR-based, or using the highest or lowest price points within a specified number of previous candles. Additionally, trades can be closed after a specific number of candles move in the opposite direction of the trade. ⚙︎ Break Even: This feature adjusts the stop loss to a break-even point once certain conditions are met, such as reaching predefined profit levels, to protect gains. ⚙︎ Trailing Stop: The trailing stop feature adjusts the stop loss as the trade moves into profit, securing gains while potentially capturing further upside. ⚙︎ Take Profit: Up to three take-profit levels can be set using various methods, such as a fixed amount of pips, ATR, or risk-to-reward ratios based on the stop loss. Alternatively, users can specify a set number of candles moving in the direction of the trade. ⚙︎ Alerts: The strategy includes a comprehensive alert system that informs the user of all significant actions, such as trade openings and closings. It supports placeholders for dynamic values like take-profit levels and stop-loss prices. ⚙︎ Dashboard: A visual display provides detailed information about ongoing and past trades on the chart, helping users monitor the strategy's performance and make informed decisions. ► Backtesting Details: Timeframe: 5-minute US30 chart Initial Balance: $10,000 Order Size: 4% of equity per trade Commission: $0.05 per contract Slippage: 5 ticks Stop Loss: ATR-based
Strategi Pine Script®
oleh isalgo
Linear Regression Trendlines & ChannelsThis new script came to me one night all of a sudden and it seems to be common knowledge for how good it works. The script utilizes linear regression to determine trendlines and channels, identifying instances where closing prices closely align with the regression line. When a significant number of closing prices fall within proximity to the regression line, trendlines are displayed or generated. Users have the flexibility to customize the proximity criteria by adjusting the margin and percentage thresholds. These parameters allow for precise control over how closely the closing prices should adhere to the regression line, as well as the minimum percentage of closing prices required to fit within the specified margin. Moreover, the script is adaptable to logarithmic scales, ensuring compatibility with various chart configurations. Additionally, it stores all relevant data in an array for convenient access in future scripts or analyses.
Penunjuk Pine Script®
oleh mks17
2
Pivot TrendLine with typeIntro The simplest version of the indicator automatically draws trendLine on your charts, with newest Type syntax. Type is some thing like type or interface in typescript or Structure in Clang. with type key word you can write more clear code in pinescript. Usage You can change the looking back length settings to get more proper lines you want. There is also a switch to turn off the historical trendlines . You can use this to build more advanced indicators or strategies.
Penunjuk Pine Script®
oleh discountry
4
Sonarlab - Trendline Liquidity Indicator**This is not a normal Trend Line Indicator** Most of the concepts we get thought online are to good to be true. Buy and sell off the touch of the trend line and you will be winning! You probably find out already that this ain't the way to trade. Trend lines mostly gets broken and you will be taken out. he reason behind this is that the trend lines sparks the interests of Institutions. They use those area's to stop people out and use them as fuel for their positions: Liquidity. TLL: Trend Line Liquidity Lets show you an example on how to use these TLL markings 👇 In this example above we can see a beautiful example of the TLL indicator mapping out the TLL. The Imbalance Indicator shows us with the BPR (balanced price range) there is a sign of going short. The other confluence we can add is the TLL, which price likes to clear in these situations. In this other example we also see two TLL resting on top. We see that price tried to break the SL (swing low), but the fake out detection showed us this was a grab on liquidity. After that we can see that on the LTF we get a displacement and we can assume that price is going to target the TLL. Another example where price cleared the TLL and used is a targets. This indicator will map the Trend Line Liquidity for you, so you are more aware of the liquidity that is resting around you. The Indicator has the following inputs: Sensitivity A lower sensitivity create smaller trend lines, where a higher sensitivity creates bigger trend lines. Display limit : The amount of lines you want the indicator to display Line type/ text size (styling options)
Penunjuk Pine Script®
oleh vuetratrading
25
Interactive trendlineThis is a concept that I have been playing with to make a manual trend line that has more then just two connecting dots but that has sequential data connected on every bar between the beginning an the end point that can then be used to determine a break of trend or a bounce. This is added in a few simple steps 1) add the indicator to your chart 2) set the x_1 time bar 3) set the y_1 price 4) set the x_2 time bar 5) set the y_2 price 6) check the table that calculated the run value and enter that value in the settings box in the "Run" input box
Penunjuk Pine Script®
oleh Blockhead305
6
[_ParkF]Linreg & Trendlines* The script has been uploaded again. Linear regression and trendline not only facilitate trend identification, but also identify support and resistance within it, and linear regression and trendline departure can detect trend changes, which are useful in trading. Linear regression and trend lines are shown in the chart. It offers a variety of options, length, color, thickness, on/off switch, etc. I hope it will help you with your trading. hope you become rich! --------------------------------------------------------------------------------------------------------------------------- * 스크립트가 다시 업로드 되었습니다. 선형 회귀(채널) 및 추세선은 추세 식별을 용이하게 할 뿐만 아니라, 또한 그 안에서 지지와 저항을 식별하고, 선형 회귀(채널) 및 추세선 이탈은 거래에 유용한 추세 변화를 감지할 수 있습니다. 선형 회귀(채널) 및 추세선이 차트에 표시됩니다. 길이, 색상, 두께, 온/오프 스위치 등 다양한 옵션을 제공합니다. 거래에 도움이 되셨으면 합니다. 부자되세요! --------------------------------------------------------------------------------------------------------------------------- * I would like to express my gratitude to zdmre for revealing the linear regression source.
Penunjuk Pine Script®
oleh ParkF
17