Mulakan

Bollinger Bands (BB)

Pro Bollinger Bands Strategy [Breno]This strategy excels in highly volatile financial instruments, including cryptocurrencies, high-beta stocks, commodity futures, and certain exchange-traded funds (ETFs) that exhibit clear mean-reversion characteristics around their Bollinger Bands. The system's ability to utilize scaling (position averaging) and an ATR-based stop loss makes it particularly effective in markets with significant price swings, allowing the trader to capture profits from price extremes while managing increased volatility-related risk. Core Strategy Logic This Strategy implements a comprehensive trend-following and mean-reversion strategy primarily leveraging the Bollinger Bands (BB) indicator for entry and exit signals, complemented by an Average True Range (ATR)-based Stop Loss mechanism and an optional EMA filter. It is designed with robust features for capital management, including configurable leverage and a sophisticated position averaging (scaling) system. Long Entry: A long position is initiated when the closing price crosses over the Lower Bollinger Band (ta.crossover(close,lowerBB)). This signals a potential mean-reversion opportunity following a price dip. Short Entry: A short position is initiated when the closing price crosses under the Upper Bollinger Band (ta.crossunder(close,upperBB)). (Note: Short entries are disabled by default in the script inputs). Exit Conditions (Profit Target): Long positions aim to exit upon interaction with the Upper Bollinger Band. Users can select from three exit methods: "Close When Touch": Exits when close≥upperBB. "Close Above then Below": Exits when the previous close was above the upper band, and the current close is below it (a reversal signal). "High Above": Exits when high>upperBB. The strategy features an optional profitOnly setting, which restricts all exits to only occur if the trade is currently in profit (i.e., close is above the strategy.position_avg_price for longs). Key Features and Customization Bollinger Bands & Filters - Customizable BB Parameters: The Length and Deviation of the Bollinger Bands are fully adjustable, allowing users to fine-tune the sensitivity of the entry and exit signals. Optional EMA Filter: An optional EMA Filter can be enabled to align entries with the prevailing trend, where a Long entry is only permitted if close≥EMA(EmaFilterRange). Risk and Capital Management - Equity Allocation: Position size is dynamically calculated based on a Percentage of Equity (capitalPerc) combined with the set Leverage multiplier. Dynamic Stop Loss (ATR-Based): An optional Stop Loss (SL) is calculated using a multiple (slAtrInput) of the Average True Range (ATR). The SL is set relative to the entry price upon trade activation, providing a volatility-adjusted risk management layer. Position Averaging (Scaling): The script supports the addition of multiple units (pyramiding) to an existing position based on three user-selected criteria: "No": No averaging. "Percent": Adds to the position if the price has dropped by a set percentage (addPct) from the average price. "ATR": Adds to the position if the current price is significantly below a calculated ATR-based support level from the average price.
Strategi Pine Script®
oleh brenosilver
Global BB Resonance [by TESTEDED]📈 Global BB Resonance Hunter 1. Design Philosophy: Dimensional Reduction In modern trading, "Information Overload" is the enemy. Traders often clutter their charts with 15+ Bollinger Band lines across 1H, 4H, Daily, and Weekly timeframes, resulting in a "spaghetti chart" that is impossible to read quickly. The core logic of this indicator is "Dimensional Reduction." Instead of drawing every single line, this script runs a background algorithm to detect "Confluence" (Resonance). The Thesis: A single Bollinger line (e.g., 1H Upper) is easily broken. However, when multiple dimensions overlap (e.g., 1H Upper + Daily Mid + Weekly Low) at the exact same price level, a "Market Consensus" is formed. These are the critical "Walls" of the market. The Solution: We sort all data by Price, not Time. If lines cluster together within a specific threshold (e.g., 0.15%), the script draws a single Resonance Box instead of multiple confusing lines. 2. Key Features 🛡️ Multi-Timeframe Monitoring: Simultaneously monitors 1H, 4H, Daily, Weekly, and Monthly Bollinger Bands in the background, regardless of your chart's current timeframe. ⚡ Smart Resonance Detection: Automatically groups overlapping levels into "Resonance Boxes." ⚡ (2-Line Confluence): Watch closely. ⚡⚡ (3-Line Confluence): Strong Support/Resistance. ⚡⚡⚡ (4+ Lines): "Iron Wall" Resonance. 📊 Volatility State Perception: Detects if the bands are Squeezing (accumulating energy) or Expanding (trending). Style Options: Choose between Icons (🧊/🔥) or Geek Symbols (>.< / <^>). 🧘 Focus Mode (Sniper View): A unique feature that hides all individual lines, leaving only the Resonance Boxes and the Dashboard. This keeps your chart clean and distraction-free. 🔔 Smart Alerts: Get notified immediately when Price touches a Resonance Box or when a Squeeze occurs. 3. Visual Guide A. The Symbols (State Indicators) You can switch styles in the settings. B. The Resonance Boxes Red Box: Resistance Zone (Above Price). Green Box: Support Zone (Below Price). Label: E.g., ⚡⚡ 1H Up + D Mid. This tells you exactly which levels are overlapping. 4. Usage Strategy The "Reversal" Setup: Look for a Green Resonance Box below price with High Confluence (⚡⚡). Ensure the state is NOT Expanding (<^> or 🔥). The "Breakout" Setup: Look for the Squeeze Symbol (>.< or 🧊) on the dashboard. If price approaches a Resonance Box while Squeezing, expect a breakout. The "Sniper" Method: Turn on Focus Mode. Set Alerts. Only look at the chart when price hits a "Wall." How to use： youtu.be 📈 布林带多维共振捕猎者 1. 设计哲学：降维打击 在现代交易中，“信息过载”是最大的敌人。交易者经常在图表上叠加 1H、4H、日线、周线等 15 条以上的布林带线条，导致图表像“盘丝洞”一样难以阅读。 本指标的核心逻辑是“降维打击”与“数据可视化”。 我们不再画出每一条线，而是在后台运行算法来捕捉**“共振”（Confluence）**。 核心理念：单一周期的布林线（如 1H 上轨）很容易被刺破。但是，当多个维度的力量（如 1H 上轨 + 日线中轨 + 周线下轨）在同一个价格水平重叠时，就形成了**“市场合力”**。这些位置才是市场真正的“铜墙铁壁”。 解决方案：系统按价格而非时间对数据进行排序。如果多条线在特定阈值（如 0.15%）内聚集，脚本会画出一个**“共振框”**，而不是无数条混乱的线。 2. 核心功能 🛡️ 全维幽灵监控：无论当前图表周期如何，脚本都会在后台实时监控 1H, 4H, 日线, 周线, 月线 的数据。 ⚡ 智能共振雷达：自动检测并合并重叠的关键位。 ⚡ (2线共振)：值得关注。 ⚡⚡ (3线共振)：强力支撑/阻力。 ⚡⚡⚡ (4线以上)：核弹级/铁壁共振。 📊 波动率状态感知：自动识别布林带是处于 挤压蓄势 还是 扩张爆发 阶段。 风格切换：支持 图标模式 (🧊/🔥) 或 极客符号模式 (>.< / <^>)。 🧘 专注模式 (Focus Mode)：一键隐藏所有单线，只保留共振框和仪表盘。让您的图表瞬间清空，像狙击手一样只关注目标。 🔔 智能警报：当价格触及共振框，或出现极度压缩信号时，立即发送警报。 3. 视觉指南 A. 状态符号说明 您可以在设置中切换显示风格。 B. 共振框说明 红色方框：上方阻力区 (Resistance)。 绿色方框：下方支撑区 (Support)。 标签示例：⚡⚡ 1H Up + D Mid —— 明确告知您是哪几条线发生了共振。 4. 实战策略 “反转”交易：寻找价格下方的绿色共振框，且具有高星级 (⚡⚡)。前提是当前状态不是扩张状态 (<^> 或 🔥)。 “突破”交易：在仪表盘上看到 挤压符号 (>.< 或 🧊)。如果价格在挤压状态下逼近共振框，不要逆势阻挡，大概率会发生强力突破。 “狙击”模式：开启 专注模式。设置好警报。不要盯着 K 线波动，直到价格撞上“墙壁”触发警报时再介入。 使用说明： youtu.be
Penunjuk Pine Script®
oleh AAAAAA2020
Intraday Volatility Map (Bajrang Bali Indicator)Indicator Name Bollinger Bands on Historical Volatility (BB-HV) – Intraday Volatility Map Concept This indicator applies Bollinger Bands directly on Historical Volatility (HV) instead of price. HV tells you the “energy” behind the move Bollinger Bands on HV tell you when volatility is compressing or expanding Works on all intraday timeframes for indices and stocks You are not watching price alone — you are watching the strength behind price movement . --- Core Logic Historical Volatility is calculated using log returns, annualized Bollinger Bands are plotted on the HV line (separate pane) Upper/Lower bands show volatility expansion or contraction User inputs: HV length, BB length, BB multiplier --- What This Indicator Shows Volatility Squeeze (Low HV) – HV stays below lower BB → quiet market, breakout coming Volatility Expansion (High HV) – HV breaches upper BB → trend day or news-driven move Normal Regime – HV oscillates between bands → balanced intraday structure --- How to Use – Indices (NIFTY / BankNifty) Trend Day Detection – Early HV breakout above upper band suggests strong directional movement Range Day Identification – HV hugging lower band implies consolidation and mean reversion Event Risk Mapping – Sudden HV spikes warn of macro data, gaps, policy events --- How to Use – Stocks Stock Selection – Choose stocks where HV is rising above mid-band → active, tradable Entry Confirmation – Breakouts with rising HV have stronger follow-through Risk Management – High HV → wide stops, low size; Low HV → tight stops, fakeouts possible --- Signals Generated (For Alerts) Squeeze Signal – HV < lower band for a set number of bars Expansion Signal – HV crossing above upper band Reversion Signal – HV falls back inside bands after a volatility spike --- Best Timeframes 1m, 3m, 5m, 15m intraday Works best on indices and liquid stocks --- Suggested Inputs HV Length: 20 BB Length: 20 BB Multiplier: 2.0 Squeeze Bars: 5–10 Expansion Filter: HV closing above upper band --- Who Should Use This Indicator? Scalpers – Identify high-energy zones Day Traders – Ride trend days via volatility regime shifts Option Traders – Read intraday realized volatility patterns --- Trading Notes This is a volatility-regime tool, not a buy/sell signal generator Works best when combined with VWAP, structure, volume, or trend indicators Always use personal judgment and risk management --- Disclaimer This script is for educational and research use only. It does not provide investment advice or guaranteed trading outcomes. Use at your own risk.
Penunjuk Pine Script®
oleh v_r_omega_7
Screener Ultimate: MM + Bollinger + FiguresVariant with Bollinger Bands - Visual Legend for the New Script: Blue Line: 50 SMA (Your medium-term trend reference). Thick Dark Blue/Black Line: 200 SMA (The "Judge", long-term trend. If the price is above it, the underlying trend is bullish). Orange Line: 20 SMA (Short-term trend and Bollinger middle band). Green Line (Top): Upper Bollinger Band (Potential resistance/overbought zone). Red Line (Bottom): Lower Bollinger Band (Potential support/oversold zone). Triangles: Still indicate your bounce zones on the 50 SMA (your main strategy). Text Labels: Indicate chart patterns (Hammer, W, etc.).
Penunjuk Pine Script®
oleh Bad_Lucky_13
Bollinger Bands HTF Hardcoded (Len 20 / Dev 2) [CHE]Bollinger Bands HTF Hardcoded (Len 20 / Dev 2) — Higher-timeframe BB emulation with bucket-based length scaling and on-chart diagnostics Summary This indicator emulates higher-timeframe Bollinger Bands directly on the current chart by scaling a fixed base length (20) via a timeframe-to-bucket multiplier map. It avoids cross-timeframe requests and instead applies the “HTF feel” by using a longer effective lookback on lower timeframes. Bands use the classic deviation of 2 and the original color scheme (Basis blue, Upper red, Lower green, blue fill). An on-chart table reports the resolved bucket, multiplier, and effective length. Pine version: v6 Overlay: true Primary outputs: Basis (SMA), Upper/Lower bands, background fill, optional info table Motivation: Why this design? Cross-timeframe Bollinger Bands typically rely on `request.security`, which can introduce complexity, mixed-bar alignment issues, and potential repaint paths depending on how users consume signals intrabar. This design offers a deterministic alternative: a single-series calculation on the chart timeframe, with a hardcoded “HTF emulation” achieved by scaling the BB length according to coarse higher-timeframe buckets. The result is a smoother, slower band structure on low timeframes without external timeframe calls. What’s different vs. standard approaches? Baseline: Standard Bollinger Bands with a fixed user length on the current timeframe, or true HTF bands via `request.security`. Architecture differences: Fixed base parameters: Length = 20, Deviation = 2. Bucket mapping derived from the chart timeframe (or manually overridden). No `request.security`; all computations occur on the current series. Effective length is “20 × multiplier”, where multiplier approximates aggregation into the chosen bucket. Diagnostics table for transparency (bucket, multiplier, resolved length, bandwidth). Practical effect: On lower timeframes, the effective length becomes much larger, behaving like a higher-timeframe Bollinger structure (smoother basis and wider stability), while remaining purely local to the chart series. How it works (technical) The script first resolves a target bucket (“Auto” or a manual selection such as 60/240/1D/…/12M). It then computes a multiplier that approximates how many current bars fit into that bucket (e.g., 1m→60m uses mult≈60, 5m→60m uses mult≈12). The effective Bollinger length becomes: `bb_len = 20 mult` (clamped to at least 1) Using the effective length, it calculates: `basis = ta.sma(src, bb_len)` `dev = 2 ta.stdev(src, bb_len)` `upper = basis + dev` `lower = basis - dev` A “bandwidth” diagnostic is also computed as `(upper-lower) / basis` (guarded against division by zero) and shown in the table as a percentage. A persistent table object is created/deleted based on the visibility toggle and updated only on the last bar for performance. Parameter Guide Source — Input series for the bands — Default: Close Use close for classic behavior; smoother sources reduce responsiveness. Bucket — HTF bucket selection — Default: Auto Auto derives a bucket from the chart timeframe; manual selection forces the intended target bucket. Offset — Plot offset — Default: 0 Shifts plots forward/back for visual alignment, displayed in the data window. Table X / Table Y — Table anchor — Default: Right / Top Places the diagnostics table in one of nine anchor points. Table Size — Table text size — Default: Normal Use small on dense charts, large for presentations. Dark Mode — Table theme — Default: Enabled Switches table palette for readability against chart background. Show Table — Toggle diagnostics table — Default: Enabled Disable for a cleaner chart. Reading & Interpretation Basis (blue): The moving average centerline of the bands (SMA of effective length). Upper (red) / Lower (green): ±2 standard deviations around the basis using the same effective length. Fill (blue tint): Visual band zone to quickly see compression/expansion. Interpretation staples: Price riding the upper band suggests strong bullish pressure; riding the lower band suggests strong bearish pressure. Band expansion indicates rising volatility; contraction indicates volatility compression. Mean reversion setups often key off the basis and re-entries from outside bands, while breakout/trend setups often key off sustained band rides. Diagnostics table: HTF Tag: Human-readable label showing the current timeframe → bucket mapping. Bucket: The resolved target bucket (Auto result or manual selection). Multiplier: The integer factor applied to the base length. Len/Dev: Shows base length (20) and the effective length result plus deviation (2). Bandwidth: Normalized width of the band (percent), useful for spotting squeezes. Practical Workflows & Combinations HTF context on LTF charts: Use this as “slow structure” bands on 1m–15m charts without requesting HTF data. Squeeze detection: Watch bandwidth shrink to historically low levels, then look for break/hold outside bands. Trend filtering: Favor long bias when price stays above the basis and repeatedly respects it; favor short bias when below. Confluence: Combine with market structure (swing highs/lows), volume tools, or a trend filter (e.g., a longer MA) for confirmation. Behavior, Constraints & Performance Repaint/confirmation: No cross-timeframe requests. Values can still evolve intrabar and settle on close, as with any indicator computed on live bars. History requirements: Very large effective lengths need sufficient historical bars; expect a warm-up period after loading or switching symbols/timeframes. Known limits: Because the method approximates HTF behavior by scaling lookback, it is not identical to true HTF Bollinger Bands computed on aggregated candles. In particular, volatility and mean can differ slightly versus a real HTF series. Sensible Defaults & Quick Tuning Default workflow: Bucket: Auto Source: Close Table: On (until you trust the mapping), then optionally off If bands feel too slow on your timeframe: choose a smaller bucket (e.g., 60 instead of 240). If bands feel too reactive/noisy: choose a larger bucket (e.g., 1D or 3D). If chart looks cluttered: hide the table; keep only the bands and fill. What this indicator is—and isn’t This is a Bollinger Band visualization layer that emulates higher-timeframe “slowness” via deterministic length scaling. It is not a complete trading system and does not include entries, exits, sizing, or risk management. Use it as context alongside your execution rules and protective stops. Disclaimer The content provided, including all code and materials, is strictly for educational and informational purposes only. It is not intended as, and should not be interpreted as, financial advice, a recommendation to buy or sell any financial instrument, or an offer of any financial product or service. All strategies, tools, and examples discussed are provided for illustrative purposes to demonstrate coding techniques and the functionality of Pine Script within a trading context. Any results from strategies or tools provided are hypothetical, and past performance is not indicative of future results. Trading and investing involve high risk, including the potential loss of principal, and may not be suitable for all individuals. Before making any trading decisions, please consult with a qualified financial professional to understand the risks involved. By using this script, you acknowledge and agree that any trading decisions are made solely at your discretion and risk. Do not use this indicator on Heikin-Ashi, Renko, Kagi, Point-and-Figure, or Range charts, as these chart types can produce unrealistic results for signal markers and alerts. Best regards and happy trading Chervolino.
Penunjuk Pine Script®
oleh chervolino
Hyper Squeeze Sniper (Dual Side: Long + Short)Hyper Squeeze Sniper (Dual Side Strategy) This script is a comprehensive Volatility Breakout System designed to identify and trade explosive price moves following periods of consolidation. It combines the classical "Squeeze" theory with Linear Regression Momentum, Volume Analysis, and an ATR-based Trailing Stop to filter false signals and manage risk effectively. The script operates on a logic of "Compression -> Explosion -> Trend Following" suitable for both Long and Short positions. 🛠 Detailed Methodology (How it works) 1. The Squeeze Detection (Consolidation) The core concept relies on the relationship between Bollinger Bands (BB) and Keltner Channels (KC). Condition: When the Bollinger Bands (Standard Deviation) contract and fall inside the Keltner Channels (ATR based), it indicates a period of extremely low volatility (The Squeeze). Visual: The background turns Gray to indicate "Do Not Trade / Wait Mode". 2. Momentum Confirmation (Linear Regression) Instead of using standard lagging indicators, this script utilizes Linear Regression of the price deviation to determine the direction of the breakout. If the Linear Regression Slope > 0, the bias is Bullish. If the Linear Regression Slope < 0, the bias is Bearish. 3. Volume Validation To avoid fake breakouts, a Volume Spike filter is applied. A signal is only valid if the current volume exceeds its moving average by a defined multiplier (Default x1.2). 4. Risk Management: ATR Trailing Stop Once a trade is entered, the script calculates a dynamic Trailing Stop based on the Average True Range (ATR). - Long: The stop line trails below the price and never moves down. - Short: The stop line trails above the price and never moves up. - Exit: The position is closed immediately when the price breaches this volatility-based safety line. How to Use 1. Wait: Look for the Gray Background. This is the accumulation phase. 2. Entry: LONG: Wait for a Green Triangle ▲ (Price breaks Upper BB + Vol Spike + Bullish Momentum). SHORT: Wait for a Red Triangle ▼ (Price breaks Lower BB + Vol Spike + Bearish Momentum). 3. Exit: Close the position when the "X" mark appears or when candles cross the trailing safety line. Settings - BB Length/Mult: Adjust the sensitivity of the squeeze detection. - Vol Spike Factor: Increase this to filter out low-volume breakouts. - ATR Period/Mult: Adjust the trailing stop distance (Higher = Wider stop for swing trading).
Penunjuk Pine Script®
oleh Gustav_Rex
4
Multi-Asset Option Strike PricesMulti-Asset Option Strike Prices automatically plots dynamic option strike levels for multiple assets on your chart. The indicator detects the active symbol and draws strike ladders above and below the current price using customizable strike increments (FX, indices, commodities, metals, etc.). It also rounds price to the nearest strike, giving a precise structural reference used by institutional options desks. These strike levels help traders visualize trend direction, trend boundaries, and potential turning points based on how price interacts with known option clusters. By mapping evenly spaced strike steps, the indicator also highlights natural stop-loss and take-profit zones within a trend, allowing traders to manage risk around predictable option-driven price levels. Supports up to 10 assets, includes custom line styling, and provides automatic strike labeling.
Penunjuk Pine Script®
oleh Kevnett
Bollinger Bands (MTF) + Bandwidth & %BJBB MTF: Bollinger Bands (MTF) + Bandwidth & %B This Pine v6 indicator overlays multi‑timeframe Bollinger Bands on the price chart and adds a lower panel with normalized Bandwidth (histogram) and %B (line), plus squeeze/bulge markers and alerts for volatility shifts. Key idea: See higher‑timeframe BB context on your working chart while tracking volatility regimes and price position within bands. Features - Multi‑Timeframe BBs: Up to four TFs (TF1–TF4) via request.security, each with visibility, colors, line widths, and optional background fills. - Configurable Inputs: Length, MA type (SMA/EMA/SMMA/WMA/VWMA), Source, StdDev multiplier, and Offset. - Lower Panel Metrics: %B (line) shows price position in the band; Bandwidth (histogram) shows width relative to basis, normalized and color‑coded vs its SMA. Reference lines at 0, 0.5, 1.0; raw highest/lowest bandwidth lines for context. - Squeeze/Bulge Detection: Alerts when bandwidth equals the rolling lowest (Squeeze) or highest (Bulge). How It Works - Per timeframe, BBs use the chosen MA basis and standard deviation × multiplier to form upper/lower bands. - A selectable TF (TF1–TF4) drives %B/Bandwidth calculations, independent of overlay TFs. Bandwidth is normalized to the rolling min–max window with safeguards against division by zero. Use Cases - Visualize higher‑timeframe context directly on your chart. - Spot volatility squeezes and expansions with objective markers and alerts. Combine %B momentum with Bandwidth regime changes to refine entries and exits.
Penunjuk Pine Script®
oleh T723hmm
Bollinger Bands Regression Forecast [BigBeluga]🔵 OVERVIEW The Bollinger Bands Regression Forecast combines volatility envelopes from Bollinger Bands with a linear regression-based projection model . It visualizes both current and future price zones by extrapolating the Bollinger channel forward in time, giving traders a statistical forecast of probable support and resistance behavior. 🔵 CONCEPTS Classic Bollinger Bands use a moving average (basis) and standard deviation (deviation) to form dynamic envelopes around price. This indicator enhances them with linear regression slope detection , allowing it to forecast how the band may expand or contract in the future. Regression is applied to both the band’s basis and deviation components to predict their trajectory for a user-defined number of Forecast Bars . The resulting forecast creates a smoothed, funnel-shaped projection that dynamically adapts to volatility. ▲ and ▼ markers highlight potential mean reversion points when price crosses the outer bounds of the bands. 🔵 FEATURES Forecast Engine : Uses linear regression to project Bollinger Band movement into the future. Dynamic Channel Width : Adapts standard deviation and slope for realistic volatility modeling. Auto-Labeled Levels : Displays live upper and lower forecast values for quick reference. Cross Signals : Marks potential overbought and oversold zones with ▲/▼ signals when price exits the band. Trend-Adaptive Basis Color : Basis line automatically switches color to represent short-term trend direction. Customizable Colors and Widths for complete visual control. 🔵 HOW TO USE Apply the indicator to visualize both current Bollinger structure and its forward projection. Use ▲/▼ breakout markers to identify short-term reversals or volatility shifts. When price consistently rides the upper band forecast, the trend is strong and likely continuing. When regression shows narrowing bands ahead, expect a volatility contraction or consolidation period. For range traders, outer projected bands can be used as potential mean reversion entry points . Combine with volume or momentum filters to confirm whether breakouts are genuine or fading. 🔵 CONCLUSION Bollinger Bands Regression Forecast transforms classic Bollinger analysis into a predictive forecasting model . By merging volatility dynamics with regression-based extrapolation, it provides traders with a forward-looking visualization of likely price boundaries — revealing not only where volatility is but also where it’s heading next.
Penunjuk Pine Script®
oleh BigBeluga
12
XAUUSD Pro Setup Suite manuel_lnt.fx is an advanced Pine Script v6 indicator designed exclusively for XAUUSD, built to automatically detect the 5 highest-probability setups in gold day trading. It combines institutional price action, volatility patterns, mean reversion logic, and momentum confirmation to generate clean, filtered, and actionable signals. The indicator automatically detects: ⸻ 1️⃣ Break & Retest Premium (BR) Identifies valid breaks of key levels and signals the retest with rejection wick, EMA20 trend confirmation, and neutral RSI. → Excellent for trend continuation. ⸻ 2️⃣ Fakeout Liquidity Trap (FO) Detects liquidity grabs above highs or below lows with an opposite close + engulfing candle confirmation. → The strongest setup for fast and explosive reversals on gold. ⸻ 3️⃣ MACD Zero-Line Shift (MACD) Signals when the MACD crosses the zero line while price breaks micro-structure. → Perfect for spotting the start of a new trend. ⸻ 4️⃣ Bollinger Squeeze → Breakout (BB) Recognizes volatility compression and signals when a breakout is likely to explode. → Ideal for clean breakout trades. ⸻ 5️⃣ Mean Reversion on EMA50 (MR) Highlights price extensions far away from the EMA50 with ATR confirmation and a reversal candle. → Great for pullbacks back toward the mean value.
Penunjuk Pine Script®
oleh lentini_manuel96
Stochastic + Bollinger Bands Multi-Timeframe StrategyThis strategy fuses the Stochastic Oscillator from the 4-hour timeframe with Bollinger Bands from the 1-hour timeframe, operating on a 10-hour chart to capture a unique volatility rhythm and temporal alignment discovered through observational alpha. By blending momentum confirmation from the higher timeframe with short-term volatility extremes, the strategy leverages what some traders refer to as “rotating volatility” — a phenomenon where multi-timeframe oscillations sync to reveal hidden trade opportunities. 🧠 Strategy Logic ✅ Long Entry Condition: Stochastic on the 4H timeframe: %K crosses above %D Both %K and %D are below 20 (oversold zone) Bollinger Bands on the 1H timeframe: Price crosses above the lower Bollinger Band, indicating a potential reversal → A long trade is opened when both momentum recovery and volatility reversion align. ✅ Long Exit Condition: Stochastic on the 4H: %K crosses below %D Both %K and %D are above 80 (overbought zone) Bollinger Bands on the 1H: Price reaches or exceeds the upper Bollinger Band, suggesting exhaustion → The long trade is closed when either signal suggests a potential reversal or overextension. 🧬 Temporal Structure & Alpha This strategy is deployed on a 10-hour chart — a non-standard timeframe that may align more effectively with multi-timeframe mean reversion dynamics. This subtle adjustment exploits what some traders identify as “temporal drift” — the desynchronization of volatility across timeframes that creates hidden rhythm in price action. → For example, Stochastic on 4H (lookback 17) and Bollinger Bands on 1H (lookback 20) may periodically sync around 10H intervals, offering unique alpha windows. 📊 Indicator Components 🔹 Stochastic Oscillator (4H, Length 17) Detects momentum reversals using %K and %D crossovers Helps define overbought/oversold zones from a mid-term view 🔹 Bollinger Bands (1H, Length 20, ±2 StdDev) Measures price volatility using standard deviation around a moving average Entry occurs near lower band (support), exits near upper band (resistance) 🔹 Multi-Timeframe Logic Uses request.security() to safely reference 4H and 1H indicators from a 10H chart Avoids repainting by using closed higher-timeframe candles only 📈 Visualization A plot selector input allows toggling between: Stochastic Plot (%K & %D, with overbought/oversold levels) Bollinger Bands Plot (Upper, Basis, Lower from 1H data) This helps users visually confirm entry/exit triggers in real time. 🛠 Customization Fully configurable Stochastic and BB settings Timeframes are independently adjustable Strategy settings like position sizing, slippage, and commission are editable ⚠️ Disclaimer This strategy is intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any asset. Market conditions vary, and past performance does not guarantee future results. Always test any trading strategy in a simulated environment and consult a licensed financial advisor before making real-world investment decisions.
Strategi Pine Script®
oleh RWCS_LTD
Squeeze Go Momentum Pro [KingThies] █ OVERVIEW The Squeeze Momentum Pro indicator identifies volatility compression phases and breakout opportunities by comparing Bollinger Bands to Keltner Channels. When price consolidates (squeeze), the bands contract inside the channels, signaling an imminent breakout. The momentum histogram shows directional bias, helping traders anticipate which way price will move when the squeeze releases. This indicator displays in a separate panel below the price chart, providing clear visual signals without cluttering price action. █ KEY FEATURES Momentum Histogram The histogram is the primary visual element, displaying momentum strength and direction with four distinct color states: • Dark Green (#00C853) — Strong bullish momentum that is increasing. This signals strengthening upward pressure and potential continuation. • Light Green (#26A69A) — Bullish momentum that is decreasing. Price remains in bullish territory but upward force is weakening. • Dark Red (#D32F2F) — Strong bearish momentum that is increasing. This signals strengthening downward pressure and potential continuation. • Light Red (#EF5350) — Bearish momentum that is decreasing. Price remains in bearish territory but downward force is weakening. The color intensity provides immediate feedback on momentum strength and trend health. Squeeze State Indicator Colored dots on the zero line communicate the current volatility state: • Orange Dots — Squeeze is ON. Bollinger Bands have contracted inside Keltner Channels, indicating consolidation and low volatility. A breakout is building and traders should prepare for directional movement. • Green Dots — Squeeze is OFF. Bollinger Bands have expanded outside Keltner Channels, indicating active momentum and higher volatility. Price is moving with conviction in the current direction. • Gray Dots — Neutral state. The bands are transitioning between squeeze states. Release Triangles Triangle shapes mark the exact bar when a squeeze releases, providing precise entry timing: • Green Triangle Up — Bullish squeeze release. The squeeze has ended with positive momentum, suggesting a long setup opportunity. • Red Triangle Down — Bearish squeeze release. The squeeze has ended with negative momentum, suggesting a short setup opportunity. Information Panel A compact dashboard in the top-right corner displays real-time trading intelligence: • Squeeze Status — Current state: ON, OFF, or NEUTRAL with color coding • Momentum Direction — Current bias: BULL or BEAR • Momentum Value — Precise numerical reading of momentum strength • Trading Signal — Actionable status: LONG SETUP, SHORT SETUP, WAIT, or MONITOR Configurable Parameters All calculation inputs are adjustable to match your trading style and timeframe: • BB Length — Bollinger Bands period (default: 20) • BB StdDev — Bollinger Bands standard deviation multiplier (default: 2.0) • KC Length — Keltner Channels period (default: 20) • KC ATR Multiplier — Keltner Channels range multiplier (default: 1.5) • Momentum Length — Linear regression period for momentum calculation (default: 20) Alert System Four alert conditions notify you of critical trading opportunities: • Bullish Squeeze Release — Squeeze has released with bullish momentum, indicating a potential long entry • Bearish Squeeze Release — Squeeze has released with bearish momentum, indicating a potential short entry • Squeeze Started — Volatility compression detected, prepare for upcoming breakout • Squeeze Ended — Volatility expansion confirmed, breakout is active █ TRADING METHODOLOGY The indicator follows a clear four-step process for identifying and trading squeeze breakouts: 1 - Wait for Orange Dots . When orange dots appear on the zero line, a squeeze is building. This indicates price consolidation and declining volatility. Do not enter trades during this phase. Instead, prepare by identifying key support and resistance levels and potential breakout directions. 2 - Watch for Release Triangle . When a triangle appears, the squeeze has released and a breakout is beginning. This is your entry signal. The triangle color (green up or red down) combined with the histogram direction indicates the breakout direction. 3 - Confirm with Histogram Direction . Check the momentum histogram for directional confirmation: • Green histogram + green triangle up = Go long. Bullish momentum supports upward breakout. • Red histogram + red triangle down = Go short. Bearish momentum supports downward breakout. 4 - Monitor Momentum Intensity . Stay in the trade while histogram bars maintain their dark, intense color. When colors lighten (dark green to light green, or dark red to light red), momentum is weakening and you should consider taking profits or tightening stops. █ INTERPRETATION GUIDE Squeeze Detection Logic A squeeze occurs when Bollinger Bands contract inside Keltner Channels. This happens when: • Standard deviation of price decreases (BB narrows) • Price consolidates within a tight range • Volatility compresses to unsustainable levels The orange dots signal this condition, warning traders that explosive movement is imminent. Squeeze Release Logic A squeeze releases when Bollinger Bands expand outside Keltner Channels. This happens when: • Price volatility increases sharply • Price breaks out of consolidation • Volume typically expands (check volume separately) The green dots and release triangles signal this condition, indicating the direction and timing of the breakout. Momentum Reading The histogram uses linear regression to calculate momentum relative to the midpoint of the recent range: • Above Zero : Price is trading above the range midpoint with bullish pressure • Below Zero : Price is trading below the range midpoint with bearish pressure • Increasing Bars : Momentum is strengthening in the current direction (darker color) • Decreasing Bars : Momentum is weakening in the current direction (lighter color) █ BEST PRACTICES • Timeframe Selection — The indicator works on all timeframes but performs best on 15-minute to daily charts. Lower timeframes may produce more false signals due to noise. • Confluence Trading — Combine squeeze releases with support/resistance levels, trend lines, or other indicators for higher probability setups. • Volume Confirmation — Check that squeeze releases occur with increasing volume. Low volume breakouts are more likely to fail. • Multiple Timeframe Analysis — Check higher timeframes for overall trend direction. Trade squeeze releases that align with the larger trend. • Parameter Adjustment — Increase BB and KC lengths for smoother signals on higher timeframes. Decrease for more sensitive signals on lower timeframes. █ LIMITATIONS • The indicator does not predict breakout direction before the squeeze releases. The momentum histogram provides bias but is not definitive until the breakout occurs. • False breakouts can occur, particularly in choppy or low-volume market conditions. Always use proper risk management and stop losses. • The indicator works best in trending markets. In deeply ranging markets with no clear direction, squeeze signals may be less reliable. • Momentum calculations use linear regression which can lag during extremely fast price movements. Confirm signals with price action. █ NOTES This implementation uses linear regression for momentum calculation rather than simple moving averages, providing more responsive and accurate directional signals. The four-color histogram system gives traders nuanced feedback on momentum strength that binary color schemes cannot provide. The indicator automatically adjusts to any symbol and timeframe without modification, making it suitable for stocks, forex, crypto, and futures markets. █ CREDITS Squeeze methodology inspired by John Carter's TTM Squeeze indicator. Momentum calculation and visual design optimized for modern trading workflows.
Penunjuk Pine Script®
oleh kingthies
1
BB SPY Mean Reversion Investment StrategySummary Mean reversion first, continuation second. This strategy targets equities and ETFs on daily timeframes. It waits for price to revert from a Bollinger location with candle and EMA agreement, then manages risk with ATR based exits. Uniqueness comes from two elements working together. One, an adaptive band multiplier driven by volatility of volatility that expands or contracts the envelope as conditions change. Two, a bias memory that re arms the same direction after any stop, target, or time exit until a true opposite signal appears. Add it to a clean chart, use the markers and levels, and select on bar close for conservative alerts. Shapes can move while the bar is open and settle on close. Scope and intent • Markets. Currently adapted for SPY, needs to be optimized for other assets • Timeframes. Daily primary. Other frames are possible but not the default • Default demo. SPY on daily • Purpose. Trade mean reversion entries that can chain into a longer swing by splitting holds into ATR or time segments Originality and usefulness • Novelty. Adaptive band width from volatility of volatility plus a persistent bias array that keeps the original direction alive across sequential entries until an opposite setup is confirmed • Failure modes mitigated. False starts in chop are reduced by candle color and EMA location. Missed continuation after a take profit or stop is addressed by the re arm engine. Oversized envelopes during quiet regimes are avoided by the adaptive multiplier • Testability. Every module has Inputs and visible levels so users can see why a suggestion appears • Portable yardstick. All risk and targets are expressed in ATR units Method overview in plain language The engine measures where price sits relative to Bollinger bands, confirms with candle color and EMA location, requires ADX for shorts(in our case long close since we use it currently as long only), and optionally requires a trend or mean reversion regime using band width percent rank and basis slope. Risk uses ATR for stop, target, and optional breakeven. A small array stores the last confirmed direction. While flat, the engine keeps a pending order in that direction. The array flips only when a true opposite setup appears. Base measures • Range basis. True Range smoothed over a user defined ATR Length • Return basis. Not required Components • Bollinger envelope. SMA length and standard deviation multiplier. Entry is based on cross of close through the band with location bias • Candle and EMA filter. Close relative to open and close relative to EMA align direction • ADX gate for shorts. Requires minimum trend strength for short trades • Adaptive multiplier. Band width scales using volatility of volatility so envelopes breathe with conditions • Regime gate optional. Band width percent rank and basis slope identify trend or mean reversion regimes • Risk manager. ATR stop, ATR target, optional breakeven, optional time exit • Bias memory. Array stores last confirmed direction and re arms entries while flat Fusion rule Minimum satisfied gates count style. All required gates must be true. Optional gates are controlled in Inputs. Bias memory never overrides an opposite confirmed setup. Signal rule • Long setup when close crosses up through the lower band, the bar closes green, and close is above the long EMA • Short setup when close crosses down through the upper band, the bar closes red, close is below the short EMA, and ADX is above the minimum • While flat the model keeps a pending order in the stored direction until a true opposite setup appears • IN LONG or IN SHORT describes states between entry and exit What you will see on the chart • Markers for Long and Short setups • Exit markers from ATR or time rules • Reference levels for entry, stop, and target • Bollinger bands and optional adaptive bands Inputs with guidance Setup • Signal timeframe. Uses the chart timeframe • Invert direction optional. Flips long and short Logic • BB Length. Typical 10 to 50. Higher smooths more • BB Mult. Typical 1.0 to 2.5. Higher widens entries • EMA Length long. Typical 10 to 50 • EMA Length short. Typical 5 to 30 • ADX Minimum for short. Typical 15 to 35 Filters • Regime Type. none or trend or mean reversion • Rank Lookback. Typical 100 to 300 • Basis Slope Length and Threshold. Larger values reduce false trends Risk • ATR Length. Typical 10 to 21 • ATR Stop Mult. Typical 1.0 to 3.0 • ATR Take Profit Mult. Typical 2.0 to 5.0 • Breakeven Trigger R. Move stop to entry after the chosen multiple • Time Exit. Minimum bars and extension when profit exceeds a fraction of ATR Bias and rearm • Bias flips kept. Array depth • Keep rearm when flat. Maintain a pending order while flat UI • Show markers and levels. Clean defaults Usage recipes Alerts update in real time and can change while the bar forms. Select on bar close for conservative workflows. Properties visible in this publication • Initial capital 25000 • Base currency USD • If any higher timeframe calls are enabled, request.security uses lookahead off • Commission 0.03 percent • Slippage 3 ticks • Default order size method Percent of equity with value 5 • Pyramiding 0 • Process orders on close On • Bar magnifier Off • Recalculate after order is filled Off • Calc on every tick Off Realism and responsible publication No performance claims. Costs and fills vary by venue. Shapes can move intrabar and settle on close. Strategies use standard candles only. Honest limitations and failure modes High impact releases and thin liquidity can break assumptions. Gap heavy symbols may require larger ATR. Very quiet regimes can reduce contrast in the mean reversion signal. If stop and target can both be touched inside one bar, outcome follows the TradingView order model for that bar path. Regimes with extreme one sided trend and very low volatility can reduce mean reversion edges. Results vary by symbol and venue. Past results never guarantee future outcomes. Open source reuse and credits None. Backtest realism Costs are realistic for liquid equities. Sizing does not exceed five percent per trade by default. Any departure should be justified by the user. If you got any questions please le me know
Strategi Pine Script®
oleh exlux
KD-NewAutoTrade for Future Trading - Heikin Ashi candles The KD-NewAutoTrade strategy is a dynamic trend-following indicator designed for scalping and swing trading across crypto, forex, and index futures. It combines the precision of EMA crossovers, RSI momentum, and ADX trend strength to deliver clear Buy/Sell signals with high reliability. 🔹 Core Logic EMA Fast & Slow Crossover – Identifies short-term and long-term trend shifts. RSI Confirmation – Filters out false signals by requiring RSI to cross custom Buy/Sell thresholds. ADX Filter – Ensures trades only trigger when market trend strength exceeds your chosen ADX minimum. 🔹 Key Features Visual Buy/Sell triangles directly on the chart. Customizable inputs for EMA, RSI, and ADX lengths. Works efficiently on all timeframes and all markets (Crypto, Indices, Stocks, Commodities). Optional background highlights for active trade zones. Alert conditions for both BUY and SELL setups – ready to use in automated strategies or alert bots. 🔹 Recommended Usage Use Heikin Ashi candles Works best on 1M - 5M timeframes. Combine with volume or higher-timeframe trend confirmation for stronger signals.
Penunjuk Pine Script®
oleh krish16887
Ultimate RSI Suite [BigBeluga]🔵 OVERVIEW The Ultimate RSI Suite elevates the classic RSI into a full professional trading system. It combines momentum analysis, advanced divergence detection, volatility-based RSI channels, multi-timeframe signals, deviation tracking, and reversal alerts into one powerful tool. This is no ordinary RSI — it’s a complete momentum intelligence engine designed to identify trend strength, exhaustion, breakout conditions, and reliable reversal points with high precision. ⚠️ Note: This suite enhances RSI with MTF dashboards, dynamic channels, deviation logic, and smart alerting — ideal for scalpers, swing traders, and institutional-style trend followers. 🔵 CONCEPTS Measures market momentum to detect overbought/oversold zones and trend health Tracks RSI behavior relative to dynamic channels (BB/Keltner/Donchian) Identifies regular bullish & bearish divergences Detects deviation moves after divergence to confirm trend continuation or exhaustion Multi-timeframe RSI conditions reveal higher-timeframe confluence Reversal triggers confirm early momentum shifts Overbought/oversold gradients visually highlight exhaustion zones 🔵 FEATURES Classic + Enhanced RSI with configurable lookback & price source RSI-Channel System (Bollinger, Keltner, Donchian) for volatility-adaptive trend structure RSI-Smoothing MA for trend direction filters RSI Reversal Signals for early trend inflection detection RSI Reversal Signals Deviation Levels +1 / +2 for advanced continuation confirmation Overbought/Oversold Gradient Zones at 35/65 or user-defined levels Divergence Engine for bullish & bearish momentum exhaustion signals On-Chart Divergence & Signals (full overlay capability) Divergence Engine Deviation Levels +1 / +2 for advanced continuation confirmation Multi-Timeframe Dashboard (RSI OB/OS, signals, divergences, channel breaks) • Hover your mouse over any signal cell to see how many bars ago it was triggered • Signals automatically expire after 50 bars Smart Alerts for divergence, reversals, channel breaks, and deviation triggers 🔵 HOW TO USE Enter long when RSI reverses from oversold & prints bullish divergence or a ▲ signal Enter short when RSI reverses from overbought & prints bearish divergence or ▼ Use channel breaks to confirm momentum expansions or trend shifts Look for deviation crosses (+1 / +2) for strong confirmation after divergence Track MTF table — more timeframe agreement = stronger conviction Avoid trading against MTF RSI extremes (OB/OS stacked zones) Combine with market structure or volume-based tools for maximum precision 🔵 ALERTS Includes full automation suite: Bullish / Bearish divergence Reversal signals (▲ / ▼) Channel breakouts (Up/Down) Deviation +1 / +2 confirmation triggers Extra RSI signal deviation alerts for precision continuation reads Great for automated systems, confirmation models, and high-probability intraday/swing entries. 🔵 CONCLUSION The Ultimate RSI Suite transforms RSI into a smart momentum-analysis system. With multi-timeframe logic, dynamic channels, advanced divergence/deviation systems, and powerful visual cues, it offers institutional-grade trend, exhaustion, and reversal detection. If you rely on RSI, this toolkit provides superior clarity, deeper context, and stronger execution timing — making it an elite upgrade for professional traders.
Penunjuk Pine Script®Skrip berbayar
oleh BigBeluga
61
Liquidity & Momentum Master (LMM)💎 Liquidity & Momentum Master (LMM) A professional dual-system indicator that combines: 📦 High-Volume Support/Resistance Zones and 📊 RSI + Bollinger Band Combo Signals — to visualize both smart money footprints and momentum reversals in one clean tool. 🧱 1. High-Volume Liquidity Zones (Support/Resistance Boxes) Conditions Visible only on 1H and higher timeframes (1H, 4H, 1D, etc.) Detects candles with abnormally high volume and strong ATR-based range Separates bullish (support) and bearish (resistance) zones Visualization All boxes are white, with adjustable transparency (alphaW, alphaBorder) Each box extends to the right automatically Only the most important (Top-N) zones are kept — weaker ones are removed automatically Interpretation White boxes = price areas with heavy liquidity and volume concentration Price approaching these zones often leads to bounces or rejections Narrow spacing = consolidation, wide spacing = potential large move 💎 2. RSI Exit + BB-RSI Combo Signals RSI Exit (Overbought/Oversold Recovery) RSI drops from overbought (>70) → plots red “RSI” above the candle RSI rises from oversold (<30) → plots green “RSI” below the candle Works on 15m, 30m, 1H, 4H, 1D → Indicates short-term exhaustion recovery BB-RSI Combo (Momentum Reversal Confirmation) Active on 1H and higher only Requires both: ✅ RSI divergence (bullish or bearish) ✅ Bollinger Band re-entry (after temporary breakout) Combo Buy (Green Diamond) Bullish RSI divergence Candle closes back above lower Bollinger Band Combo Sell (Red Diamond) Bearish RSI divergence Candle closes back below upper Bollinger Band → Confirms stronger reversal momentum compared to standard RSI signals
Penunjuk Pine Script®
oleh HSeungpyo
Tristan's Tri-band StrategyTristan's Tri-band Strategy - Confluence Trading System Strategy Overview: This strategy combines three powerful technical indicators - RSI, Williams %R, and Bollinger Bands - into a single visual trading system. Instead of cluttering your chart with separate indicator panels, all signals are displayed directly on the price chart using color-coded gradient overlays, making it easy to spot high-probability trade setups at a glance. How It Works: The strategy identifies trading opportunities when multiple indicators align (confluence), suggesting strong momentum shifts: 📈 Long Entry Signals: RSI drops to 30 or below (oversold) Williams %R reaches -80 to -100 range (oversold) Price touches or breaks below the lower Bollinger Band All three conditions must align during your selected trading session 📉 Short Entry Signals: RSI rises to 70 or above (overbought) Williams %R reaches 0 to -20 range (overbought) Price touches or breaks above the upper Bollinger Band All three conditions must align during your selected trading session Visual Indicators: (faint) Green gradients below candles = Bullish oversold conditions (buying opportunity) (faint) Red/Orange gradients above candles = Bearish overbought conditions (selling opportunity) Stacked/brighter gradients = Multiple indicators confirming the same signal (higher probability) will stack and show brighter / less faint Blue Bollinger Bands = Volatility boundaries and mean reversion zones Exit Strategy: Long trades exit when price reaches the upper Bollinger Band OR RSI becomes overbought (≥70) Short trades exit when price reaches the lower Bollinger Band OR RSI becomes oversold (≤30) Key Features: ✅ Session Filters - Trade only during NY (9:30 AM-4 PM), London (3 AM-11:30 AM), or Asia (7 PM-1 AM EST) sessions ✅ No Repainting - Signals are confirmed on candle close for realistic backtesting and live trading ✅ Customizable Parameters - Adjust RSI levels, BB standard deviations, Williams %R periods, and gradient visibility ✅ Visual Clarity - See all three indicators at once without switching between panels ✅ Built-in Alerts - Get notified when entry and exit conditions are met How to Use Effectively: Choose Your Trading Session - For day trading US stocks, enable only the NY session. For forex or 24-hour markets, select the sessions that match your schedule. Look for Gradient Stacking - The brightest, most visible gradients occur when both RSI and Williams %R signal together. These are your highest-probability setups. Confirm with Price Action - Wait for the candle to close before entering. The strategy enters on the next bar's open to prevent repainting. Respect the Bollinger Bands - Entries occur at the outer bands (price extremes), and exits occur at the opposite band or when momentum reverses. Backtest First - Test the strategy on your preferred instruments and timeframes. Works best on liquid assets with clear trends and mean reversion patterns (stocks, major forex pairs, indices). Adjust Gradient Visibility - Use the "Gradient Strength" slider (lower = more visible) to make signals stand out on your chart style. Best Timeframes: 5-minute to 1-hour charts for intraday trading; 4-hour to daily for swing trading (I have also found the 3 hour timeframe to work really well for some stocks / ETFs.) Best Markets: Liquid instruments with volatility - SPY, QQQ, major stocks, EUR/USD, GBP/USD, major indices Risk Management: This is a mean reversion strategy that works best in ranging or choppy markets. In strong trends, signals may appear less frequently. Always use proper position sizing and stop losses based on your risk tolerance. ---------------------------------------------- Note: Past performance does not guarantee future results. This strategy is provided for educational purposes. Always backtest thoroughly and practice proper risk management before live trading.RetryClaude can make mistakes. Please double-check responses. Sonnet 4.5
Strategi Pine Script®
oleh OhRayOhRay
RSI Exit + BB-RSI Combo📊 RSI Exit + BB-RSI Combo Indicator This indicator combines RSI overbought/oversold exit signals with Bollinger Band re-entry conditions to highlight potential reversal or retracement zones. 1️⃣ RSI Exit Signal - When RSI drops below 70 after being overbought → 🔴 "RSI" label - When RSI rises above 30 after being oversold → 🟢 "RSI" label - Works on 15m / 30m / 1h / 4h / 1D timeframes 2️⃣ BB-RSI Combo Signal - When an RSI divergence forms and - The candle body re-enters the Bollinger Band on 1H+ timeframe → Combo signal (💎 diamond) is shown 💡 How to Use - Use RSI exit signals to spot overextension corrections - Use combo signals to identify high-probability reversal or rebound setups - Suitable for both swing and short-term trading
Penunjuk Pine Script®
oleh HSeungpyo
Volume Weighted Bollinger BandsThis indicator provides a customizable version of Bollinger Bands, enhanced with optional volume weighting and a method for decomposing market volatility. Key Features: Volatility Decomposition: The indicator's primary feature is its ability to separate total volatility, controlled by the 'Estimate Bar Statistics' option. Standard Mode (Estimate Bar Statistics = OFF): The indicator functions as a customizable Bollinger Band. It calculates the standard deviation of the user-selected Source and plots a single set of bands. Decomposition Mode (Estimate Bar Statistics = ON): The indicator uses a statistical model ('Estimator') to calculate within-bar volatility. (Assumption: In this mode, the Source input is ignored, and an estimated mean for each bar is used instead). This mode displays two sets of bands: Inner Bands: Show only the contribution of the 'between-bar' volatility. Outer Bands: Show the total volatility (the sum of between-bar and within-bar components). Customizable Construction: The indicator is a hybrid: Basis Line: The central line is calculated using a selectable Moving Average type (e.g., EMA, SMA, WMA). Volume Weighting: An option (Volume weighted) allows for volume to be incorporated into the calculation of both the basis MA and the volatility decomposition. Logarithmic Scaling: An optional 'Normalize' mode calculates the bands on a logarithmic scale. This results in bands that maintain a constant percentage distance from the basis, suitable for analyzing exponential markets. Multi-Timeframe (MTF) Engine: The indicator includes an MTF conversion block. When a Higher Timeframe (HTF) is selected, advanced options become available: Fill Gaps handles data gaps, and Wait for timeframe to close prevents repainting by ensuring the indicator only updates when the HTF bar closes. Integrated Alerts: Includes a full set of built-in alerts for the source price crossing over or under the central MA line and the outermost calculated volatility band. DISCLAIMER For Informational/Educational Use Only: This indicator is provided for informational and educational purposes only. It does not constitute financial, investment, or trading advice, nor is it a recommendation to buy or sell any asset. Use at Your Own Risk: All trading decisions you make based on the information or signals generated by this indicator are made solely at your own risk. No Guarantee of Performance: Past performance is not an indicator of future results. The author makes no guarantee regarding the accuracy of the signals or future profitability. No Liability: The author shall not be held liable for any financial losses or damages incurred directly or indirectly from the use of this indicator. Signals Are Not Recommendations: The alerts and visual signals (e.g., crossovers) generated by this tool are not direct recommendations to buy or sell. They are technical observations for your own analysis and consideration.
Penunjuk Pine Script®
oleh AustrianTradingMachine