Bottoms Up w/ Buy and Sell AlertsBITMEX:XBTUSD
This indicator is best used on 4hr candles. It produces a buy/long and sell/short alert with pre-coded syntax for Autoview. There are four alerts total, 2 for BitMEX testnet and 2 for BitMEX (each has a buy/sell alert). The alerts are pre-coded for BitMEX
****be sure to edit the message script to your desired contract amount and leverage****
This script will also work on Profit Trailer, but you will need to change the alert message syntax to match your exchange. You will also want to adjust your bot's selling strategy to hold the coin longer. This is not a quick scalp of a coin, this is intended to buy a coin and ride its trend longer. This is more of an automated swing trader rather than a scalping opportunity like most bots use.
Cari dalam skrip untuk "bot"
Deep Pockets BOTThis script repaints.. don't use without using it with my bot!!! ONLY my bot knows how to use this script and get the results stated.
CMYK RMI TRIPLE Automated study for Autoview▼ This is the study version of the script, For usage with Autoview
◊ Introduction
This script makes use of three RMI 's, that indicate Overbought/Oversold on different timescales that correspond with Frequency’s that move the market.
◊ Origin
The Relative Momentum Index was developed by Roger Altman and was introduced in his article in the February, 1993 issue of Technical Analysis of Stocks & Commodities magazine.
While RSI counts up and down ticks from close to close, the Relative Momentum Index counts up and down ticks from the close relative to a close x number of days ago.
This results in an RSI that is smoother, and has another setting for fine tuning results.
This bot originated out of Project XIAM , an investigative script that outlined my approach towards Automated Trading Strategies.
Are you interested in writing bots yourself ? check out the beta version of this script.
It has many bugs, but also most of the Skeleton.
◊ Usage
This script is intended for Automated Trading with AUTOVIEW or TVAUTOTRADER , on the 1 minute chart.
◊ Features Summary
Overlay Mode
Indicator Mode
Three RMI's
Trend adjustment
Pyramiding
Ignore first entries
Take Profit
Stop Loss
Interval between Entries
Multiring Fix
Alert signal Seperation
◊ Community
Wanna try this script out ? need help resolving a problem ?
CMYK :: discord.gg
AUTOVIEW :: discordapp.com
TRADINGVIEW UNOFFICIAL :: discord.gg
◊ Setting up Autoview Alerts
Use the study version of this script, To set up The Alerts Autoview Picks up on.
The Signals to work with are :
Open 1 Long
Use this to open one Long Position.
With quantity being : /
Once per bar
Being larger than 0
Comment example : e=exchange b=long q=amount t=market
Open 1 Short
Use this to open one Short Position.
With quantity being : /
Once per bar
Being larger than 0
Comment example : e=exchange b=short q=amount t=market
Close1 Position
Use this to Close The amount of one Open Position.
With quantity* being : /
Once per bar
Being larger than 0
Comment example : e=exchange c=position q=amount t=market
*Beware when using a percental % quantity, instead of an absolute quantity.
Percental Quantities are based on the , Not
And will change in absolute value relative to the amount of open trades.
Close All positions
Use this to Close All Open Positions.
With quantity being :
Once per bar
Being larger than 0
Comment example : e=exchange c=position t=market
For the specific Syntax used in the comment of the alert, visit Autoview .
◊ Setting up TVAutotrader
Use the strategy version of this script, And load it into TVAT .
◊ Backtesting
Use the strategy version of this script for backtesting.
◊ Contact
Wanna try this script out ? need help resolving a problem ?
CMYK :: discord.gg
CMYK XIAM OPEN◊ Introduction
This is project XIAM, a work in progress.
Recently i came across the repainting problem.
Since then i haven't seen any bot-code that makes > 5% profit in two weeks with 0.25% fees/trade.
People who make good bots either bluff or don't share the code.
they let you rent it.
I aim to understand, learn it, write it myself. And share my findings with whoever shares with me.
◊ Origin
Based on RMI (RSI with momentum) and SMA, and values derived from those.
◊ Usage
Currently an investigative script.
◊ Theoretical Approaches
Philosophy α :: Cleansignal
:: Cleaning up the signal, from irregularities that cause unpredictable results.
Merging available tickers of a pair into one.
Merging available tickers of different coins into one in the correct proportion. (eg. Crypto market cap)
Removing Jitter, and smoothing signal without delay.
Philosophy β :: Rythmic
:: Syncing into the rythm's, to never miss the que, and trade on every theoretical low/high
Searching Amplitude, Period, Phase Shift, Frequency's of the carrier waves.
Marking Acrivity/inactivity of the carrier waves.
Partial Fractal repetition asses-able with above data?
Philosophy γ :: consequential
:: Seeking for Indicatory events and causal relations
Probability / reward.
Confirmation and culmination.
...
◊ Community
Wanna share your findings ? or need help resolving a problem ?
CMYK :: discord.gg
AUTOTVIEW :: discordapp.com
Swing Crypto Bot – Extended Patterns + Three Outside UpSwing Crypto Bot – Extended Patterns is a Pine-Script indicator that automatically scans for seven high-probability bullish setups and only signals when multiple conditions align. Here’s an advanced overview of how it works under the hood:
1. Multi-Factor Filters
Trend Filter: Price must be above the 50-period Simple Moving Average.
Volatility Filter: Price must also break above the upper Bollinger Band (20,2) to catch momentum expansions.
Momentum Filter: RSI(14) is constrained to between 45 and 80, avoiding both extreme overbought and oversold readings.
Participation Filter: Current bar’s volume must exceed its 20-period moving average.
2. Seven Candlestick Patterns
The script codes and counts each of these classic bullish reversals:
Hammer – a long lower wick (≥2× body) after a downtrend.
Bullish Engulfing – a green body fully engulfing the prior red body.
Bullish Harami – a small green body contained within the prior red body.
Morning Star – a three-bar sequence: a down bar, a neutral/doji bar, then a strong up close above mid-point.
Three White Soldiers – three consecutive long green bars each closing higher than the last.
Tweezer Bottom – two bars with identical lows and the second bar green, marking a double-bottom.
Three Outside Up – three bars: a red bar, a green engulfing bar, then a third green bar closing above the engulfing high.
Each pattern sets its own Boolean flag (hammerOK, engulfOK, etc.), then the script tallies how many of the seven are true on that bar.
3. Pattern Naming Logic
If exactly one pattern flag is true, the indicator labels it by name (“Hammer”, “Engulfing”, etc.).
If more than one triggers simultaneously, it displays “Mixed”.
If none are found (even if the bar meets other filters), it shows “None”.
4. Scoring & Signal Logic
The script awards 1 point each for:
Price > SMA50
Price > Upper BB
Volume > MA(20)
RSI in
Any of the 7 patterns detected
A buy signal fires only when the bar is the last bar, and the score ≥ 3.
5. Risk Management & Alerts
Stop-Loss = 1.5 × ATR(14) below entry (automatically guaranteed to be below current price).
Take-Profit = 2 × that ATR-based risk (ensuring a minimum 2:1 RR).
On the final bar, the script plots:
A 🔥 flame icon above the bar.
A single info bubble showing
By layering trend, momentum, volume and 7 distinct candlestick patterns into a concise entry rule with built-in TP/SL, this script gives swing traders a comprehensive, multi-signal alert system—all visible at a glance on your chart.
BTC Breakout Bot (TP/SL + Alerts)📈 BTC Breakout Bot (TP/SL + Alerts)
This strategy is designed for Bitcoin (BTC/USDT) on breakout trades. It detects price breakouts using recent highs and lows, and automatically handles:
✅ Long and short entries
✅ Take Profit and Stop Loss levels
✅ Built-in alert system (compatible with Telegram/webhook)
✅ Customizable lookback, TP, and SL settings
Strategy logic:
Enters a long position when price breaks above the highest high of the last N candles.
Enters a short position when price breaks below the lowest low of the last N candles.
Each trade includes a dynamic Take Profit and Stop Loss based on a % of entry price.
Alerts are triggered for every breakout trade (long or short).
Parameters:
Breakout Lookback: Number of candles to check for breakouts (default: 20)
Take Profit (%): TP level based on percentage from entry (default: 5%)
Stop Loss (%): SL level based on percentage from entry (default: 2%)
Babanov_DOTUSDT V2🧪 Deep Backtest Results (DOT 5-Min Strategy)
Backtest conducted on DOTUSDT.P (Bybit) using a 5-minute chart timeframe over several weeks of data.
! imgur.com
⚠️ Важно: Инструкции за правилна употреба на скрипта!
Ако искате да използвате този скрипт с webhook alerts за автоматична търговия, моля, обърнете внимание на следните стъпки:
✅ 1. Активирайте "Live Trading Mode"
Преди да създадете какъвто и да е alert, отидете в таба "Inputs" и задължително активирайте опцията "Live Trading Mode". Без нея скриптът няма да изпраща правилни сигнали.
✅ 2. Въведете търговската сума в USD
В таба "Properties", въведете сумата в USD, която ботът ще използва за търговия с DOT.
- Препоръчително е сумата да бъде такава, която може да бъде разделена на 50 (например 50, 100, 150, 200 и т.н.), за да се гарантира коректно управление на позициите и обемите при търговия.
✅ 3. Препоръчителна платформа: Bybit - BYBIT:DOTUSDT.P
Скриптът е оптимизиран и тестван за търговия на Bybit. Използването му на други платформи може да доведе до различни резултати, тъй като графиките и ценовите движения може да се различават.
-----------------------------------------------------------------------------------------------
⚠️ Important: Instructions for Proper Use of This Script
If you want to use this script with webhook alerts for automated trading, please follow the steps below carefully:
✅ 1. Enable "Live Trading Mode"
Before creating any alerts, go to the "Inputs" tab and make sure to enable the "Live Trading Mode" option.
Without it, the script will not generate correct trading signals.
✅ 2. Enter Your Trading Amount in USD
In the "Properties" tab, enter the amount in USD that the bot will use for DOT trading.
It is strongly recommended to enter an amount that can be divided by 50 (e.g., 50, 100, 150, 200, etc.) to ensure proper position sizing and trade management.
✅ 3. Recommended Exchange: Bybit - BYBIT:DOTUSDT.P
The script is optimized and tested specifically for Bybit.
Using it on other exchanges may result in different outcomes due to variations in chart data and price movements.
Babanov_XRPUSDT V2🧪 Deep Backtest Results (XRP 5-Min Strategy)
Backtest conducted on XRPUSDT.P (Bybit) using a 5-minute chart timeframe over several weeks of data.
! imgur.com
⚠️ Важно: Инструкции за правилна употреба на скрипта!
Ако искате да използвате този скрипт с webhook alerts за автоматична търговия, моля, обърнете внимание на следните стъпки:
✅ 1. Активирайте "Live Trading Mode"
Преди да създадете какъвто и да е alert, отидете в таба "Inputs" и задължително активирайте опцията "Live Trading Mode". Без нея скриптът няма да изпраща правилни сигнали.
✅ 2. Въведете търговската сума в USD
В таба "Properties", въведете сумата в USD, която ботът ще използва за търговия с XRP.
- Препоръчително е сумата да бъде такава, която може да бъде разделена на 50 (например 50, 100, 150, 200 и т.н.), за да се гарантира коректно управление на позициите и обемите при търговия.
✅ 3. Препоръчителна платформа: Bybit - BYBIT:XRPUSDT.P
Скриптът е оптимизиран и тестван за търговия на Bybit. Използването му на други платформи може да доведе до различни резултати, тъй като графиките и ценовите движения може да се различават.
-----------------------------------------------------------------------------------------------
⚠️ Important: Instructions for Proper Use of This Script
If you want to use this script with webhook alerts for automated trading, please follow the steps below carefully:
✅ 1. Enable "Live Trading Mode"
Before creating any alerts, go to the "Inputs" tab and make sure to enable the "Live Trading Mode" option.
Without it, the script will not generate correct trading signals.
✅ 2. Enter Your Trading Amount in USD
In the "Properties" tab, enter the amount in USD that the bot will use for XRP trading.
It is strongly recommended to enter an amount that can be divided by 50 (e.g., 50, 100, 150, 200, etc.) to ensure proper position sizing and trade management.
✅ 3. Recommended Exchange: Bybit - BYBIT:XRPUSDT.P
The script is optimized and tested specifically for Bybit.
Using it on other exchanges may result in different outcomes due to variations in chart data and price movements.
Renko UT Bot Strategy v6 - ADX FilterDescription:
This script implements a Renko-based trailing stop strategy using the UT Bot method, now enhanced with an optional ADX and DI+/- filter to help avoid choppy, low-momentum market conditions. Trades are triggered only when price and EMA cross the adaptive trailing stop and ADX/DI conditions are also met.
USE:
Start the indicator on a Renko chart and optimize settings for prefered choosen chart
Key Features:
Adaptive ATR trailing stop based on Renko logic
EMA/Trailing Stop crossovers for entries
Adjustable ADX and DI+/- filter (no signals if conditions aren’t met)
Visual stop line and trade labels on the chart
Customizable inputs for ATR, EMA, and filter levels
Disclaimer:
This strategy is provided for educational and research purposes only. It has not been tested in live trading or with real money. The past performance of this script does not guarantee future results. Trading involves substantial risk, and you can lose all or more of your investment.
Before considering any real-money use, please test the strategy thoroughly on a demo account or in TradingView’s paper trading environment.
This script is not financial advice. Consult with a licensed financial advisor before making trading decisions.
Author PDK1977
Babanov_SOLUSDT V2🧪 Deep Backtest Results (SOL 5-Min Strategy)
Backtest conducted on SOLUSDT.P (Bybit) using a 5-minute chart timeframe over several weeks of data.
! imgur.com
⚠️ Важно: Инструкции за правилна употреба на скрипта!
Ако искате да използвате този скрипт с webhook alerts за автоматична търговия, моля, обърнете внимание на следните стъпки:
✅ 1. Активирайте "Live Trading Mode"
Преди да създадете какъвто и да е alert, отидете в таба "Inputs" и задължително активирайте опцията "Live Trading Mode". Без нея скриптът няма да изпраща правилни сигнали.
✅ 2. Въведете търговската сума в USD
В таба "Properties", въведете сумата в USD, която ботът ще използва за търговия с SOL.
- Препоръчително е сумата да бъде такава, която може да бъде разделена на 50 (например 50, 100, 150, 200 и т.н.), за да се гарантира коректно управление на позициите и обемите при търговия.
✅ 3. Препоръчителна платформа: Bybit - BYBIT:SOLUSDT.P
Скриптът е оптимизиран и тестван за търговия на Bybit. Използването му на други платформи може да доведе до различни резултати, тъй като графиките и ценовите движения може да се различават.
-----------------------------------------------------------------------------------------------
⚠️ Important: Instructions for Proper Use of This Script
If you want to use this script with webhook alerts for automated trading, please follow the steps below carefully:
✅ 1. Enable "Live Trading Mode"
Before creating any alerts, go to the "Inputs" tab and make sure to enable the "Live Trading Mode" option.
Without it, the script will not generate correct trading signals.
✅ 2. Enter Your Trading Amount in USD
In the "Properties" tab, enter the amount in USD that the bot will use for SOL trading.
It is strongly recommended to enter an amount that can be divided by 50 (e.g., 50, 100, 150, 200, etc.) to ensure proper position sizing and trade management.
✅ 3. Recommended Exchange: Bybit - BYBIT:SOLUSDT.P
The script is optimized and tested specifically for Bybit.
Using it on other exchanges may result in different outcomes due to variations in chart data and price movements.
Babanov_ETHUSDT V2🧪 Deep Backtest Results (ETH 5-Min Strategy)
Backtest conducted on ETHUSDT.P (Bybit) using a 5-minute chart timeframe over several weeks of data.
! imgur.com
⚠️ Важно: Инструкции за правилна употреба на скрипта!
Ако искате да използвате този скрипт с webhook alerts за автоматична търговия, моля, обърнете внимание на следните стъпки:
✅ 1. Активирайте "Live Trading Mode"
Преди да създадете какъвто и да е alert, отидете в таба "Inputs" и задължително активирайте опцията "Live Trading Mode". Без нея скриптът няма да изпраща правилни сигнали.
✅ 2. Въведете търговската сума в USD
В таба "Properties", въведете сумата в USD, която ботът ще използва за търговия с ETH.
- Препоръчително е сумата да бъде такава, която може да бъде разделена на 50 (например 50, 100, 150, 200 и т.н.), за да се гарантира коректно управление на позициите и обемите при търговия.
✅ 3. Препоръчителна платформа: Bybit - BYBIT:ETHUSDT.P
Скриптът е оптимизиран и тестван за търговия на Bybit. Използването му на други платформи може да доведе до различни резултати, тъй като графиките и ценовите движения може да се различават.
-----------------------------------------------------------------------------------------------
⚠️ Important: Instructions for Proper Use of This Script
If you want to use this script with webhook alerts for automated trading, please follow the steps below carefully:
✅ 1. Enable "Live Trading Mode"
Before creating any alerts, go to the "Inputs" tab and make sure to enable the "Live Trading Mode" option.
Without it, the script will not generate correct trading signals.
✅ 2. Enter Your Trading Amount in USD
In the "Properties" tab, enter the amount in USD that the bot will use for ETH trading.
It is strongly recommended to enter an amount that can be divided by 50 (e.g., 50, 100, 150, 200, etc.) to ensure proper position sizing and trade management.
✅ 3. Recommended Exchange: Bybit - BYBIT:ETHUSDT.P
The script is optimized and tested specifically for Bybit.
Using it on other exchanges may result in different outcomes due to variations in chart data and price movements.
Babanov_BTCUSDT V2🧪 Deep Backtest Results (BTC 5-Min Strategy)
Backtest conducted on BTCUSDT.P (Bybit) using a 5-minute chart timeframe over several weeks of data.
! (i.imgur.com)
⚠️ Важно: Инструкции за правилна употреба на скрипта!
Ако искате да използвате този скрипт с webhook alerts за автоматична търговия, моля, обърнете внимание на следните стъпки:
✅ 1. Активирайте "Live Trading Mode"
Преди да създадете какъвто и да е alert, отидете в таба "Inputs" и задължително активирайте опцията "Live Trading Mode". Без нея скриптът няма да изпраща правилни сигнали.
✅ 2. Въведете търговската сума в USD
В таба "Properties", въведете сумата в USD, която ботът ще използва за търговия с BTC.
- Препоръчително е сумата да бъде такава, която може да бъде разделена на 50 (например 50, 100, 150, 200 и т.н.), за да се гарантира коректно управление на позициите и обемите при търговия.
✅ 3. Препоръчителна платформа: Bybit - BYBIT:BTCUSDT.P
Скриптът е оптимизиран и тестван за търговия на Bybit. Използването му на други платформи може да доведе до различни резултати, тъй като графиките и ценовите движения може да се различават.
-----------------------------------------------------------------------------------------------
⚠️ Important: Instructions for Proper Use of This Script
If you want to use this script with webhook alerts for automated trading, please follow the steps below carefully:
✅ 1. Enable "Live Trading Mode"
Before creating any alerts, go to the "Inputs" tab and make sure to enable the "Live Trading Mode" option.
Without it, the script will not generate correct trading signals.
✅ 2. Enter Your Trading Amount in USD
In the "Properties" tab, enter the amount in USD that the bot will use for BTC trading.
It is strongly recommended to enter an amount that can be divided by 50 (e.g., 50, 100, 150, 200, etc.) to ensure proper position sizing and trade management.
✅ 3. Recommended Exchange: Bybit – BYBIT:BTCUSDT.P
The script is optimized and tested specifically for Bybit.
Using it on other exchanges may result in different outcomes due to variations in chart data and price movements.
Babanov_BTCUSDT!!! Important: Instructions for Proper Use of This Script
If you want to use this script with webhook alerts for automated trading, please follow the steps below carefully:
✅ 1. Enable "Live Trading Mode"
Before creating any alerts, go to the "Inputs" tab and make sure to enable the "Live Trading Mode" option.
Without it, the script will not generate correct trading signals.
✅ 2. Enter Your Trading Amount in USD
In the "Properties" tab, enter the amount in USD that the bot will use for BTC trading.
It is strongly recommended to enter an amount that can be divided by 50 (e.g., 50, 100, 150, 200, etc.) to ensure proper position sizing and trade management.
✅ 3. Recommended Exchange: Bybit – BYBIT:BTCUSDT.P
The script is optimized and tested specifically for Bybit.
Using it on other exchanges may result in different outcomes due to variations in chart data and price movements.
-----------------------------------------------------------------------------------------------
!!! Важно: Инструкции за правилна употреба на скрипта!
Ако искате да използвате този скрипт с webhook alerts за автоматична търговия, моля, обърнете внимание на следните стъпки:
✅ 1. Активирайте "Live Trading Mode"
Преди да създадете какъвто и да е alert, отидете в таба "Inputs" и задължително активирайте опцията "Live Trading Mode". Без нея скриптът няма да изпраща правилни сигнали.
✅ 2. Въведете търговската сума в USD
В таба "Properties", въведете сумата в USD, която ботът ще използва за търговия с BTC.
- Препоръчително е сумата да бъде такава, която може да бъде разделена на 50 (например 50, 100, 150, 200 и т.н.), за да се гарантира коректно управление на позициите и обемите при търговия.
✅ 3. Препоръчителна платформа: Bybit - BYBIT:BTCUSDT.P
Скриптът е оптимизиран и тестван за търговия на Bybit. Използването му на други платформи може да доведе до различни резултати, тъй като графиките и ценовите движения може да се различават.
Swing Crypto Bot – Extended Bullish PatternsSwing Crypto Bot – Extended Bullish Patterns
A lean, rule-based Pine Script that spots high-probability swing entries by combining trend filters, momentum checks and a broad set of classic bullish candlestick patterns—all with built-in risk management and instant in-chart alerts.
🔍 What It Does
Multi-Factor Screening
Price > 50-period SMA (trend filter)
Price > Upper Bollinger Band (breakout filter)
RSI(14) between 45–80 (momentum filter)
Volume > 20-period SMA of volume (participation filter)
Candlestick Patterns
Detects 6 core bullish setups:
Hammer
Bullish Engulfing
Bullish Harami
Morning Star (3-bar reversal)
Three White Soldiers
Tweezer Bottom
Displays exactly one in the info bubble (or “Mixed”/“None” if ambiguous).
Instant Alert
Shows a 🔥 icon on the final bar when 3 of 5 criteria are met (including at least one pattern).
Automated Risk Management
Stop-Loss = 1.5 × ATR(14) below entry (guaranteed under price)
Take-Profit = Risk × 2 (minimum RR 2:1) above entry
In-chart info bubble with Pattern name, Entry, SL, TP & RR
Clean Overlay
Only SMA50 + Bollinger Bands
One flame + one info bubble on the last bar
Heavy lifting off-chart: use TradingView’s native Volume & RSI panes for deeper analysis
How to Use
Add the script to your chart.
Watch for the 🔥 on the latest candle—your 3+ filters have aligned.
Read the info bubble for the exact candlestick pattern, entry price, stop-loss, take-profit and achieved RR.
Confirm with your own support/resistance lines, Volume & RSI panels.
Ideal for swing traders who demand precision, diversity of patterns and automatic risk controls. Copy-paste and publish on TradingView today!
XAU/USD Scalping Bot [Jake-Style 1500+] FINALDescription:
This advanced scalping bot is engineered for XAU/USD using Jake-style visual overlays with predictive trade triggers, early entry signals, and multi-layer confirmation tools.
Key Features:
• EMA Cloud System with color-coded directional bias (5/13/21/55/144/377)
• PSAR Flip-Only Dots to highlight trend reversal moments without chart clutter
• Bollinger Band Zones to visualize volatility channels
• Predictive Entry Flags for early buy/sell signals before momentum candles (≥2 pip move)
• TRUE Candle Logic for confirmed trend-following entries
• Multi-Level TP/SL Lines with real-time alerts:
• TP1 / TP2 / TP3 with precise trigger logic
• Stop Loss hit detection
• Red Flag Warnings for exit caution during reversal zones (overbought TDI / failed breakouts)
Optimized For:
• 1m / 3m / 5m / 15m / 30m timeframes
• Scalping & intraday trading with high-precision entries
• Traders who prefer visual confirmation before committing to entries
Created by: @Livingstonedan
Powered by: ChatGPT x Jake-style automation logic
John Bob-Trading-BotDeveloped by Ayebale John Bob with the help of his bestie, this innovative strategy combines advanced Smart Money Concepts with practical risk management tools to help traders identify and capitalize on key market moves.
Key Features:
Smart Money Concepts & Fair Value Gaps (FVG):
The strategy monitors price action for fair value gaps, which are visualized as extremely faint horizontal lines on the chart. These FVGs signal potential areas where institutional traders might have entered or exited positions.
Dynamic Entry Signals:
Buy signals are triggered when the price crosses above the 50-bar lowest low or when a bullish FVG is detected. Conversely, sell signals are generated when the price falls below the 50-bar highest high or a bearish FVG is identified. Each signal is visually marked on the chart with clear buy (green) and sell (red) labels.
Multi-Level Order Execution:
Once an entry signal occurs, the strategy places five separate orders, each with its own take-profit (TP) level. The TP levels are calculated dynamically using the Average True Range (ATR) and a set of predefined multipliers. This allows traders to scale out of positions as the market moves favorably.
Dynamic Risk Management:
A stop-loss is automatically set at a distance determined by the ATR, ensuring that risk is managed in accordance with current market volatility.
Real-Time Trade Information Table:
In the bottom-right corner of the chart, a trade information table displays essential details about the current trade:
Side: Displays "BUY NOW" (with a dark green background) for long entries or "SELL NOW" (with a dark red background) for short entries.
Entry Price & Stop-Loss: Shows the entry price (highlighted in green) and the corresponding stop-loss level (highlighted in red).
Take-Profit Levels: Lists the five TP levels, each of which turns green once the market price reaches that target.
Timer: A live timer in minutes counts from the moment the current trade trigger started, helping traders track the duration of their active trades.
Visual Progress Bar:
A histogram-style progress bar is plotted on the chart, visually representing the percentage gain (or loss) relative to the entry price.
This strategy was meticulously designed to incorporate both technical analysis and smart risk management, offering a robust trading solution that adapts to changing market conditions. Whether you're a seasoned trader or just starting out, the AyebaleJohnBob Trading Bot equips you with the tools and visual cues needed to make well-informed trading decisions. Enjoy a seamless blend of strategy and style—crafted with passion by Ayebale John Bob and his bestie!
Ping Pong Bot StrategyOverview:
The Ping Pong Bot Strategy is designed for traders who focus on scalping and short-term opportunities using support and resistance levels. This strategy identifies potential buy entries when the price reaches a key support area and shows bullish momentum (a green bar). It aims to capitalize on small price movements with predefined risk management and take profit levels, making it suitable for active traders looking to maximize quick trades in trending or ranging markets.
How It Works:
Support & Resistance Calculation:
The strategy dynamically identifies support and resistance levels using the lowest and highest price points over a user-defined period. These levels help pinpoint potential price reversal areas, guiding traders on where to enter or exit trades.
Buy Entry Criteria:
A buy signal is triggered when the closing price is at or below the support level, and the bar is green (i.e., the closing price is higher than the opening price). This ensures that entries are made when prices show signs of upward momentum after hitting support.
Risk Management:
For each trade, a stop loss is calculated based on a user-defined risk percentage, helping to protect against significant drawdowns. Additionally, a take profit level is set at a ratio relative to the risk, ensuring a disciplined approach to exit points.
0.5% Take Profit Target:
The strategy also includes a 0.5% quick take profit target, indicated by an orange arrow when reached. This feature helps traders lock in small gains rapidly, making it ideal for volatile market conditions.
Customizable Inputs:
Length: Adjusts the period for calculating support and resistance levels.
Risk-Reward Ratio: Allows traders to set the desired risk-to-reward ratio for each trade.
Risk Percentage: Defines the risk tolerance for stop loss calculations.
Take Profit Target: Enables the customization of the quick take profit target.
Ideal For:
Traders who prefer an active trading style and want to leverage support and resistance levels for precise entries and exits. This strategy is particularly useful in markets that experience frequent price bounces between support and resistance, allowing traders to "ping pong" between these levels for profitable trades.
Note:
This strategy is developed mainly for the 5-minute chart and has not been tested on longer time frames. Users should perform their own testing and adjustments if using it on different time frames.
hamster-bot MRS 2 (simplified version) MRS - Mean Reversion Strategy (Countertrend) (Envelope strategy)
This script does not claim to be unique and does not mislead anyone. Even the unattractive backtest result is attached. The source code is open. The idea has been described many times in various sources. But at the same time, their collection in one place provides unique opportunities.
Published by popular demand and for ease of use. so that users can track the development of the script and can offer their ideas in the comments. Otherwise, you have to communicate in several telegram chats.
Representative of the family of counter-trend strategies. The basis of the strategy is Mean reversion . You can also read about the Envelope strategy .
Mean reversion , or reversion to the mean, is a theory used in finance that suggests that asset price volatility and historical returns eventually will revert to the long-run mean or average level of the entire dataset.
The strategy is very simple. Has very few settings. Good for beginners to get acquainted with algorithmic trading. A simple adjustment will help avoid overfitting. There are many variations of this strategy, but for understanding it is better to start with this implementation.
Principle of operation.
1)
A conventional MA is being built. (fuchsia line). A limit order is placed on this line to close the position.
2)
(green line) A limit order is placed on this line to open a long position
3)
(red line) A limit order is placed on this line to open a short position
Attention!
Please note that a limit order is used. Conclude that the strategy has a limited capacity. And the results obtained on low-liquid instruments will be too high in the tester. On real auctions there will be a different result.
Note for testing the strategy in the spot market:
When testing in the spot market, do not include both long and short at the same time. It is recommended to test only the long mode on the spot. Short mode for more advanced users.
Settings:
Available types of moving averages:
SMA
EMA
TEMA - triple exponential moving average
DEMA - Double Exponential Moving Average
ZLEMA - Zero lag exponential moving average
WMA - weighted moving average
Hma - Hull Moving Average
Thma - Triple Exponential Hull Moving Average
Ehma - Exponential Hull Moving Average
H - MA built based on highs for n candles | ta.highest(len)
L - MA built based on lows for n candles | ta.lowest(len)
DMA - Donchian Moving Average
A Kalman filter can be applied to all MA
The peculiarity of the strategy is a large selection of MA and the possibility of shifting lines. You can set up a reverse trending strategy on the Donchian channel for example.
Use Long - enable/disable opening a Long position
Use Short - enable/disable opening a Short position
Lot Long, % - % allocated from the deposit for opening a Long position. In the spot market, do not use % greater than 100%
Lot Short, % - allocated % of the deposit for opening a Short position
Start date - the beginning of the testing period
End date - the end of the testing period (Example: only August 2020 can be tested)
Mul - multiplier. Used to offset lines. Example:
Mul = 0.99 is shift -1%
Mul = 1.01 is shift +1%
Non-strict recommendations:
1) Test the SPOT market on crypto exchanges. (The countertrend strategy has liquidation risk on futures)
2) Symbols altcoin/bitcoin or altcoin/altcoin. Example: ETH/BTC or DOGE/ETH
3) Timeframe is usually 1 hour
If the script passes moderation, I will supplement it by adding separate settings for closing long and short positions according to their MA
DCA EMA Simple Bot [Starbots]
This is a simple idea of DCA trading on EMA crosses. Strategy is not repainting.
The difference between this and any other strategy is, that this script allows you to preset DCA buy triggers at desired levels and customize each DCA order size independently. Alerts are working, this strategy is easily used for automatic trading.
I mainly trade on Cryptohopper, Pionex, 3commas. This was created for community, alerts are working and non-repainting. Should work on any other as well.
Trading Condition:
It's buying when Fast EMA crosses up Slow EMA. Set your paramters.
It's selling if EMA's crosses back, signaling a sell. Optional.
DCA:
You can enter DCA on 20 custom levels or layers. It buys DCA when price hits the plotted blue line on the chart that's set by input % triggers. (buy 1st DCA at 2% drop, buy 2nd DCA at 5% drop,...)
Set your Inital Capital and Pyramiding in Properties tab, Initial Order Size and DCA Order Size (lot1,lot2,lot3,..), Order Type are changed in strategy inputs.
-By default you can see that we buy when EMA's cross up and signal a buy for 10% of equity, if market is dropping you will then place a first DCA order ( 20% equity) at 2% drop (lower) from initial order. If market keeps dropping you have more DCA levels where you can buy and average down your holding position. For selling you can use Take profit and Stop Loss targets that averages down multiple open positions, it will sell it once it reaches your desirable Take Profit and close a deal. You can also close your trade if EMA signals a sell.
Pyramiding - number of orders you can open at a time
Your first buy order is pyramiding 1. To allow it to buy 1 DCA or merge one time, set pyramding to 2.
Want to DCA 10 times? Set pyramiding at 11. (+1 always)
More features:
- Profit Calendar
- Show Balance label before every new trade
- DCA table - visualize how much of your investment is used in trades. If a background of the table is green you are okay, if the background color is red - you are using more money for orders than you actually have.
Buy Orders << Strategy Equity/Capital
- Show / Hide DCA lines - if your chart processing is getting slow you should hide some DCA levels to speed it up
- Backtesting Range - for testing the strategy in different time windows
- Alerts
When all trades are closed on your chart, winning rate of the strategy is 100% actually.
Win rate is shown differently as it's actually closing and opening every trade individually by default in TradingView system. We merge positions together and average it down into one big position to later sell for a profit (DCA).
You use this Trading Algorithm at your own risk. Do not trade before testing or invest something you cannot afford to lose on markets.
Jesse Livermore Strategy [Buy & Sell]Jesse Livermore was a famous trader who made a fortune in the early 20th century through his unique approach to trading.
While he did not leave behind a single, specific trading strategy that is attributed to him, I have tried to reproduce one.
His trading strategy was based on understanding market trends and sentiment, and he used several technical indicators to identify potential entry and exit points.
Some of the indicators he used include:
Price Action:
Jesse Livermore relied heavily on price action to make trading decisions.
He believed that the price itself was the best indicator of market sentiment, and that by analyzing the price movement, he could identify trends and market behavior.
Volume:
Livermore also used volume to confirm price movements.
He believed that a rise in volume along with a price increase indicated a strong bullish trend, while a decrease in volume with a price increase indicated a weak trend.
Pivot Points:
Another key component of Jesse Livermore's trading strategy was pivot points.
He used pivot points to identify potential support and resistance levels in the market, which he then used to identify potential entry and exit points.
Jesse Livermore outlined a simple trading system: wait for pivotal points before entering a trade.
When the points come into play, trade them using a buffer, trading in the direction of the overall market.
Let the price dictate your actions and stay with profitable trades until there is good reason to exit the trade.
The one I have tried to reproduce it's based on Pivot High and Low looking back 5 Days, and the average price oscillator.
When the price is bellow the support defined line it's time to Buy ( Long Position ), when the Price line is over the Resistance Line it's time to Sell ( Short Position )
This indicator has to be checked, and tried into a Real-Time context, so using the Replay functionality of TradingView is the best way to see and understand how Signals comes
(NB: look back into the chart without Replay should give you wrong Buy/Sell information)
The Indicator can be used on every TimeFrames, but the better ones are 5min - 15min.
I will add the possibility to choose the TimeFrames value for Pivot High and Low.
I will create a version with Alerts for Buy and Sell and the possibility to integrate it with "3commas Bot" where the best deal can be to set a TP to 1% for each Long or Short Entry.
Let's try it and comment for doubts or questions.
Entry Alert BotThis bot is SIMPLY to trigger an external webhook. You simply enter you take profit, entry, and stop loss %, and it will auto-populate the variables listed to the calculated values. That is all this script does. It does draw the trade on the chart for you. If you want a long, and price crosses up over you entry it will trigger the webhook. If you want a short and price crosses below your entry, it will trigger the webhook.
Broadview Economic StudioThank you for taking the time to read this description. We'll be taking a look at the Broadview Economic Studio. This has been a work-in-progress for years and is a very powerful tool for planning trades with complex volume scaling strategies. We will be talking about many indicators and types of indicators used in the public domain, but it is NOT recommended to reverse engineer our scripts as there is quite a bit of logic in the code that works to make each common approach entirely unique. So although you may understand quite a bit about oscillators, the way they work with the rest of the logic within the script may change the way you know them to work from elsewhere.
In the chart snapshot above you'll see a mild configuration where I only had to tweak a few settings. Commissions are set to 0.1%, starting capital is set to $10,000, and slippage is off. In my tests orders came through less than a penny off. Generally speaking, there are really only two situations in which you should be concerned about slippage. The first is if you trade really low timeframe charts like the 1 second. This tool, while it works for any timeframe, is programmed on the 45 minute timeframe and works best there. The other situation in which you should be prepared for slippage is if you're using extremely high volume trades in the hundreds of thousands or millions depending on the market cap and liquidity of the asset you're studying. Large orders like that have to be split up among several deals and that can cause slippage.
There are 31 primary inputs for users to tweak. Each input is grouped within a module called a Suite. Each suite has a focus like filtering signals or strategically allocating volume according to your strategy. Everything starts with the Origin Suite. The Origin Suite is a group of inputs that generates Tops & Bottoms from price action. It uses math like Rate of Change, where one can specify a required rate of change before an Origin signal can be made, and users can specify how much lower in price a bar must be compared to previous bars. So with the Origin Suite, users can control how often they want to see originating signals and under what conditions they can appear.
We used to use WVF and CVI to produce top and bottom signals, but our Origin Suite works much better for systematically generating profitable configurations.
The triangles you see on the chart represent markers, potential signals, or Prop Signals as they're referred to within the script. The blue arrows represent trades where Prop Signals were allowed to pass as true long signals. There are two ways to ignore Prop Signals. You can filter the markers entirely, or you can reduce their volume scaling to the minimum which is usually $10 for most exchanges. We're first going to be talking about some of the primary DCA inputs before we talk about the technology we use to filter and overload signals.
Here are some important features found within the script:
Base Orders
Safety Orders
Take Profits
Change-Based Volume Scaling
Ignoring Low or Medium Changes
Overloading
Filtering
Alert Messages w/ Volume Scaling
Let's walk through each of these features in more depth.
The Base Order is the initial Long position within a series. It comes in first and is followed by all of its Safety Orders. The Base Order is set to $25 within the script by default. Keeping the base order low allows one to reserve more of their capital for Safety Orders that are lower within a dip, and thus, lower the user's Position Average. The primary feature of this script is to help users plan their volume scaling strategically, and this is where we start. It's this kind of due diligence and effort in protecting trades that makes this script unique.
So we start with a low Base Order. Then, we follow with a lot of Safety Orders. Typically in DCA this is done in consistent time intervals and in consistent amounts. So in regular DCA one may invest the same amount bi-weekly on pay day. They use the financial instrument as a sort of savings and average their position over their consistent investments. This is not where the bleeding edge of DCA is today though. In modern Doller Cost Averaging, I would expect to see signals and volume scaling based on logic.. as opposed to being consistent intervals.
This sets up the explanation of the primary means of volume scaling within the script. Mathematically, we start with the net balance. This is your specified starting balance plus any wins or losses. Users specify what % of their Available Balance they would like to start with when volume scaling. This percent of capital is then multiplied by a Safety Order Multiplier. The safety order multiplier is made up of a number specified by the user, multiplied by the number of the Safety Order you're on. So user's can control this equation/algorithm and scale their investments as the number of Safety Orders increases and drops in price become more opportune.
The Take Profit within the script lets users specify their desired ROI from a series. So if a user sets a 60% take profit, the script will set a price from the position average that when reached will give the user a 60% ROI for the series including its Base Order and all its Safety Orders.
Before moving on, let's talk about the amazing internal reporting found in the script. When you zoom in on the blue arrows, you can see each trade is accompanied by some extremely helpful information. This is just another feature that makes this script unique, it is the feature that gives us accurate reporting and ultimately allows us to connect with TradingView's Strategy Tester in a way that provides instant backtests with good merit. With this reporting not only can users get reports and information on trades made on different assets with different configurations, but user's can perform a deep dive on each configuration and know exactly what was going on for each trade. The first number is the number of the safety order the script is on. Remember, this is used in the primary volume scaling math. The second number is the amount the script spent on the current trade. The third number denotes the cumulative spending for the series. The final number displays the script's available balance at that time. With these numbers, the TradingView Strategy Tester, and the List of Trades feature, users can practice as much due diligence as they need during their studies.
Let's move on to talking about my favorite suite within the script, the Volume Scaling Suite. Here there are two primary means of controlling volume scaling. Although, in the near future there will be more.
In this suite you'll find Change-Based Volume Scaling and Position Average Volume Scaling. Position Average Volume Scaling is quite easy to explain. This feature only allows signals to pass if they are lower in price than your base order. In this way, users can apply most of their capital to trades that lower their position average. Simply having the money in the market can boost profits, but having a lower Position Average is the entire reason we DCA. Change-Based Volume Scaling is quite a bit more complex.
In theory, one could argue that every moment is a great moment to buy. It's just that some moments are more opportune than others. So it's not about perfect signals as much as it's about proper volume scaling.
Change-Based Volume Scaling allows us to set rules that dictate how much volume scaling is used based on the asset's current delta, or Rate of Change.
Using CBVS, one can downscale capital applied to signals with a low ROC, or simply ignore them. So if a signal comes in and the price hasn't changed very much then you can automatically use less volume for the trade. One can do the same thing for medium changes, and the user can specify what quantifies as a low or medium change. Users can give extra volume to signals with a greater rate of change, or overload signals with a high rate of change! So the CBVS feature gives users the ability to allocate volume based on logic rooted in the asset's rate of change. If a signal has dropped a lot in price, then generally, it is deserving of more capital and that's what makes this feature unique and so powerful.
There are two kinds of Overloading found in the script. There's overloading from CBVS, and then overloading from the 4 signal filtering suites. There's an important difference to note before we move on. Overloading performed by CBVS is based on ignored signals. So if you ignore low or medium change signals, and you have CBVS Overloading on, the script will allocate more capital to High Change signals. When signals are ignored, they are downscaled to $10. Whereas with the filtering suites, if a signal is filtered the Prop Signal triangle marker is removed entirely. The overloading in that scenario is simply applied to signals that aren't filtered. The reason it's done this way is because allowing ignored signals to still come in, with the lowest volume scaling possible, keeps the Safety Order count rising which works in the volume scaling math. This math is intrinsic to getting capital deep within dips and crashes.
So in future versions we may allow ignored signals to be filtered out entirely but for the time being, simply scaling them down to the lowest possible amount is what produces the best and most consistent configurations.
Let's talk about filtering signals, and the overloading provided within each filtering suite.
Here you can see our Overbought & Oversold Heatmap V3. This is a unique indicator that takes 15 common oscillators and visualizes them in a way that clearly denotes confluence. Looking at this indicator makes it easer to read cycles and trends. It is quite common for investors to base their entire scripts on one or more of the oscillators found within the OBOS Heatmap V3. So the OBOS Heatmap V3 is an awesome way to ensure your signals follow an oversold trend! The orange represents an oscillator being oversold, while the yellow represents it being overbought. Generally, when an asset is oversold it is a better time to buy. One can filter signals based on this information and use the Heatmap's unique ability to quantify confluences. In this script users can set a sensitivity and that sets the number of oscillators that must be in agreement before a signal is allowed to pass.
Here are the oscillators found within the OBOS Heatmap:
*Please keep in mind that although some of these oscillators may have big names, the code and math in the script may work differently than you're used to. This is because the code and math is changed quite a bit, and the overall intended functionality of the OBOS Heatmap has a larger scope than any one indicator. It's also important to note that the lengths for these oscillators are set low and are meant to classify the individual signal as either overbought or oversold, and not the entire period. So while the OBOS Heatmap is awesome for trends and cycles, it's ultimately meant to classify individual price bars as either overbought or oversold according to a consensus.*
Relative Strength Index
Money Flow Index
Commodity Channel Index
Aroon Oscillator
Relative Volatility Index
Fast Stochastic Detrended Price Oscillator
Fast Stochastic Elders Force Index
Fast Stochastic Relative Strength Index
Fast Stochastic Relative Vigor Index
Fast Stochastic Klinger Oscillator
Fast Stochastic Awesome Oscillator
Fast Stochastic Ultimate Oscillator
Fast Stochastic Chande Momentum Oscillator
Fast Stochastic On Balance Volume Oscillator
Fast Stochastic Moving Average Convergence/Divergence
Each band of the Overbought & Oversold Heatmap represents an oscillator. When it's orange it's said to be oversold. When it's yellow it's said to be overbought. The indicator turns purple during trends and reversals where it is neither overbought nor oversold. It can differentiate between uptrends and downtrends with differing colors of purple, but the OBOS Heatmap is not used for trends or cycles in this script. It is used to quantify oversold confluence.
Let's talk about the Dominance Suite.
First note in the top portion of the screenshot above, you will see various colors in the script. It replaces the price line with something we call Price Flow bars. So when you add the script it's best to make the stock price line invisible in TV settings. The Price Flow Bars use a preset EMA to color price action as being in either a downward momentum or upward momentum. The triangular signals represent dark teal for the initial long marker within a series, dark green for long orders and long signals that convert into safety orders, and light green for safety orders. This is more logic that makes this script really unique. The dark green initial long marker signals are rarely seen. You can find them at the beginning of a new series of signals and they work to establish when a new series of signals should begin. The dark green signals actually denote a long base order opportunity, but if a series has already started then these signals are converted into Safety Orders. The Safety Orders then come in light green, and red for Prop Shorts. Prop Shorts work with Initial Longs to establish the start of a new series. More on that math I cannot tell.
In the bottom half of the screenshot is the Dominance Suite itself. It's another one of the four filtering suites found in the script. It is made up of 7 oscillators that work to classify a price bar as being controlled by either the bears or the bulls. If a price bar is controlled by the bears it is said to be a better investment. The Dominance Suite works by applying a moving average to the balance of power. This is the way TradingView has intended the balance of power to be used, and works quite nicely in classifying individual price bars as either bearish or bullish. It's not an overall trend indicator as much as it states whether a bar is mostly controlled by the bears or the bulls.
Here are the oscillators found within the Dominance Suite:
SMA of BOP
EMA of BOP
HMA of BOP
WMA of BOP
VWMA of BOP
TEMA of BOP
LSMA of BOP
Within the script, there is an input for a negative threshold. When each of these 7 oscillators is in confluence and below this set threshold, the Prop Long will be allowed to pass as a real trade.
Keep in mind that each filtering suite also has the option to overload signals.
So not only can you filter signals based on these suites but you can also apply additional volume scaling to signals that don't get filtered.
Here we have the True Oscillator. The True Oscillator is a brand new oscillator. It's similar to things like the RSI or DPO, but technically speaking it considers many more factors into its average than other oscillators. It considers balance of power, sentiment, volume, momentum, gravity, and places special-strategic weighting on price data based on whether it's opening, closing, high, or low. If you stack the True Oscillator up with the RSI you'll notice right away they look similar, but each movement is quite different. Overall the movements are more balanced, the individual bars are more consistent with price data, and the swings are more clearly pronounced while simultaneously having a better register of strength in momentum. We use this indicator to filter and overload signals, to trade according to momentum, and to provide a 16th independent oscillator that can check the OBOS Heatmap without having to be confluent.
The final filtering suite is based on Net Volume. It classifies signals as oversold when there is a significant negative trend in net volume. If Net Volume is under 0, and trends downward for either 3, 4, or 5 bars in a row then it will mark a signal as oversold and allow it to pass. Then, if overloading for this suite is turned on it will allocate more volume to signals it does not filter out.
There is a lot that can be said about this strategy. The primary takeaway though is that it's not just one strategy. It's a tool for everyone, to help them plan their approach to different assets in different market climates. This tool can help you study current market conditions. It can allow you to plan a strategic approach to market segments, and see how your strategy would fare if new market data performed similarly. It's not just one strategy, but more of a strategy printer.
The Origin Suite allows users to plan the positioning of their signals. The Overbought & Oversold Suite allows users to filter their signals based on whether or not they are oversold. The Dominance Suite allows users to filter signals based on whether the market is being controlled by the bears or the bulls. The True Oscillator gives users the ability to filter signals based on a deep and powerful momentum oscillator. The Net Volume Suite lets users filter signals based on volume trends. When signals are filtered, signals that pass, can be overloaded with additional volume scaling. Features like Change-Based Volume Scaling and Position Average Volume Scaling give users plenty of inputs to create complex volume scaling strategies. Common-sense DCA inputs allow users to scale into markets the way pros do.
The Broadview Economic Studio is a powerful tool for planning trades with complex volume scaling strategies.
Users can plan their approach to different kinds of markets. They can link the script with their bot or broker like 3Commas, and the script will automatically send the correct volume scaling through to the bot.
Thank you for your time, and for reading the description of the Broadview Economic Studio.
VWMA/SMA 3Commas BotThis strategy utilizes two pairs of different Moving Averages, two Volume-Weighted Moving Averages (VWMA) and two Simple Moving Averages (SMA).
There is a FAST and SLOW version of each VWMA and SMA.
The concept behind this strategy is that volume is not taken into account when calculating a Simple Moving Average.
Simple Moving Averages are often used to determine the dominant direction of price movement and to help a trader look past any short-term volatility or 'noise' from price movement, and instead determine the OVERALL direction of price movement so that one can trade in that direction (trend-following) or look for opportunities to trade AGAINST that direction (fading).
By comparing the different movements of a Volume-Weighted Moving Average against a Simple Moving Average of the same length, a trader can get a better picture of what price movements are actually significant, helping to reduce false signals that might occur from only using Simple Moving Averages.
The practical applications of this strategy are identifying dominant directional trends. These can be found when the Volume Weighted Moving Average is moving in the same direction as the Simple Moving Average, and ideally, tracking above it.
This would indicate that there is sufficient volume supporting an uptrend or downtrend, and thus gives traders additional confirmation to potentially look for a trade in that direction.
One can initially look for the Fast VWMA to track above the Fast SMA as your initial sign of bullish confirmation (reversed for downtrending markets). Then, when the Fast VWMA crosses over the Slow SMA, one can determine additional trend strength. Finally, when the Slow VWMA crosses over the Slow SMA, one can determine that the trend is truly strong.
Traders can choose to look for trade entries at either of those triggers, depending on risk tolerance and risk appetite.
Furthermore, this strategy can be used to identify divergence or weakness in trending movements. This is very helpful for identifying potential areas to exit one's trade or even look for counter-trend trades (reversals).
These moments occur when the Volume-Weighted Moving Average, either fast or slow, begins to trade in the opposite direction as their Simple Moving Average counterpart.
For instance, if price has been trending upwards for awhile, and the Fast VWMA begins to trade underneath the Fast SMA, this is an indication that volume is beginning to falter. Uptrends need appropriate volume to continue moving with momentum, so when we see volume begin to falter, it can be a potential sign of an upcoming reversal in trend.
Depending on how quickly one wants to enter into a movement, one could look for crosses of the Fast VWMA under/over the Fast SMA, crosses of the Fast VWMA over/under the Slow SMA, or crosses over/under of the Slow VWMA and the Slow SMA.
This concept was originally published here on TradingView by ProfitProgrammers.
Here is a link to his original indicator script:
I have added onto this concept by:
converting the original indicator into a strategy tester for backtesting
adding the ability to conveniently test long or short strategies, or both
adding the ability to calculate dynamic position sizes
adding the ability to calculate dynamic stop losses and take profit levels using the Average True Range
adding the ability to exit trades based on overbought/oversold crosses of the Stochastic RSI
conveniently switch between different thresholds or speeds of the Moving Average crosses to test different strategies on different asset classes
easily hook this strategy up to 3Commas for automation via their DCA bot feature
Full credit to ProfitProgrammers for the original concept and idea.
Any feedback or suggestions are greatly appreciated.
